summaryrefslogtreecommitdiffstats
path: root/meta-yocto-bsp
Commit message (Collapse)AuthorAgeFilesLines
* linux-yocto: Update genericx86* BSPs to v4.1.13Saul Wold2015-12-091-2/+2
| | | | | | | | | | Update the 4.1 kernel to the lastest stable for the generixx86 meta-yocto-bsps (From meta-yocto rev: 7e81049a6bf06e970ff434acecb278966048ce3a) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gma500_gfx: Avoid inserting gma500_gfx module for certain devicesAlejandro Hernandez2015-11-254-0/+33
| | | | | | | | | | | | | | | | | | | The gma500_gfx driver will match certain devices on which it causes incorrect functionality, we want to avoid inserting this module, basicallly blacklist it for specific hardware, but still allow it to work on other hardware by default; usually when we have an already working system, using udev rules would do the job, but since we are building it, it is impossible to blacklist a driver when a certain udev rule matches, since rootfs isn't writeable at this point during boot time, the solution is to use modprobe install, which runs a certain command instead of inserting a matching module, this command needs to insert the module manually afterwards and have a flag --ignore-install so it doesnt create an infinite loop executing itself everytime it wants to insert the module, busybox's modprobe doesn't provide this functionality, so a small hack had to be used to avoid the infite loop instead. (From meta-yocto rev: 70c143767a8b63921e668a62ac463b3a6b8c6132) Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto_4.1: Update SRCREV for genericx86*Saul Wold2015-10-291-2/+2
| | | | | | | | | | This update matches the kernel update made to oe-core linux-yocto and address some graphics issues. (From meta-yocto rev: afe024cd4a97bb32bf8296a85b403669ca41f634) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: Update SRCREV for genericx86* BSPsSaul Wold2015-10-071-2/+2
| | | | | | | | | | | This update brings the kernel for genericx86* up to date with the linux-yocto kernel and 4.1.8 (From meta-yocto rev: 77a9d55ecad4b737ab1b828598c970feffff52d4) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/selftest/yoctobsp: Basic tests for yocto-bsp scriptLeonardo Sandoval2015-10-011-0/+39
| | | | | | | | | | | | Unit tests include listing properties and creating BSP using the default kernel, both tests done for supported architectures. Test can be manually executed with: $ oe-selftest --run-tests yoctobsp.YoctoBSP (From meta-yocto rev: e84fb6fe8219f874b0157bdf53489bbb5f7f81cb) Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsp: bump to linux-yocto 4.1 for the non-x86 BSPsKevin Hao2015-10-014-3/+12
| | | | | | | | | | Boot test for all these boards. (From meta-yocto rev: 577768063124771d7469b1f860e5291cd8e019fc) Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bsps: update 3.14 SRCREVsBruce Ashfield2015-09-091-5/+5
| | | | | | | | | | Updating the 3.14 SRCREVs to ensure that both gcc 4.9.x and gcc 5.x produce working images for all reference BSPs. (From meta-yocto rev: 5eb20f021851ac564da191e6adb276ef1254ee23) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto-3.14: Update to latest revisionsRichard Purdie2015-08-301-5/+5
| | | | | | | | | Update the 3.14 kernel to the latest metadata to add in fixes for gcc 5 in particular. (From meta-yocto rev: fa157f6cc5d3f37bb3bcf57baacf75a5d1bd875c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto-3.14: Update to branch HEADsRichard Purdie2015-08-201-5/+5
| | | | | | | | | This update addresses several gcc5 issues amongst other things and updates the branch revisions to the latest in the linux-yocto repo. (From meta-yocto rev: cc1b46bc051d2313d9b345baedea3c0ed525bc19) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* genericx86*: Update BSPs to use 4.1 KernelSaul Wold2015-08-192-1/+12
| | | | | | | | | | | | | | | This adds the initial bbappend to meta-yocto-bsp for the 4.1 kernel It also sets up the PREFERRED_VERSION for the X86 and X86-64 Generic BSPs to the 4.1 kernel. This has been tested on MinnowBoard (32bit) MinnowBoard Max (64bit) along with both 32 and 64 bit versions of the NUC. (From meta-yocto rev: e1fe9bc5211ad8fae3de6b1e3febba8364a5a943) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsp: mpc8315e-rdb: Set KERNEL_DEVICETREE to mpc8315erdb.dtbHe Zhe2015-08-141-1/+1
| | | | | | | | | | | | To avoid warning of "xxx contains the full path to the the dts file, but only the dtb name should be used.", Set KERNEL_DEVICETREE to mpc8315erdb.dtb (From meta-yocto rev: a37a544e0e035342d40cb70447e7f7f23aa2fc0c) Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oe-selftest: restore gummiboot testsPaul Eggleton2015-07-282-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | These are the gummiboot tests recently removed from OE-Core, with the following changes: * Make them use MACHINE = "genericx86-64" instead of "nuc" and remove all usage of meta-intel * Use DEPLOY_DIR instead of assuming build directory will be in the default path relative to COREBASE * Fix build test to actually check if the file was created as part of the test instead of possibly being around from a previous build * Fix wic test to actually check the output to find the name of the .direct file that wic has created, instead of passing if any .direct file happens to exist in /var/tmp/wic (We can now add these in this layer courtesy of Chris Larson's OE-Core commit 182b8ed9f26ed8b6a8eb6dcaec82db9aca14b010). (From meta-yocto rev: 8e945e39327869c6b53959c5eb324ba3e4cb0b20) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-bsps: add 3.14-rt configurationBruce Ashfield2015-07-251-0/+11
| | | | | | | | | | | | | To enable preempt-rt for the h/w reference boards, we can create a bbappend that sets the KMACHINE mappings and valid hashes. Currently only genericx86* is enabled. Other boards can be added once validated. (From meta-yocto rev: b6cbc4c9b9a887ab6c20e168316184da272c1347) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bsps: update SRCREVs to the 3.19 latestBruce Ashfield2015-06-051-5/+5
| | | | | | | | | Updating the reference BSP's SRCREVs to pick up the latest 3.19 changes. (From meta-yocto rev: bad2646473eaad889f77cec4ec40c759d3acfb4a) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsp: bump to linux-yocto 3.19 for the non-x86 BSPsKevin Hao2015-06-054-3/+12
| | | | | | | | | | Boot test for all these boards. (From meta-yocto rev: 916f6100d24db663d1cc1ffb0e7fa5b696686988) Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* genericx860common.inc: Enable using the 3.19 kernelSaul Wold2015-05-221-1/+1
| | | | | | | | | | | This is the second half of enabling the 3.19 kernel for the genericx86* meta-yocto BSPs. (From meta-yocto rev: 7671a1f303b822e6773fc54bb623ef342203d917) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsp: Add genericx86* BSP to use 3.19Saul Wold2015-05-191-0/+11
| | | | | | | | | | | Add the linux-yocto_3.19.bbappend to support the genericx86 BSP Tested on a variety of machines both 32 bit and 64 bit (From meta-yocto rev: d54caed545cb865b4aff0a6eda381fe56a3f23ff) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsps: remove 3.10 bbappendBruce Ashfield2015-02-211-14/+0
| | | | | | | | | | All reference boards are now using 3.14 as their baseline, and we no longer have a 3.10 Yocto kernel, so we can safely remove the bbappend. (From meta-yocto rev: 9135c0b3e4d889fac81a471ca016e1ddf599d227) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* beaglebone.conf: update KERNEL_IMAGETYPE to match u-bootMaciej Borzecki2014-12-211-1/+1
| | | | | | | | | | | | | U-boot 2014.07 in Poky expects a zImage kernel image, thus a build done with current machien config will not be directly useable. Update machine config to produce a zImage. (From meta-yocto rev: 96afb63a83116b9993a23cd20b33a9a68e59b525) Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-bsps: update h/w reference boards to the latest 3.14 SRCREVsBruce Ashfield2014-10-021-5/+5
| | | | | | | | | | The oe-core BSPs have been udpated to 3.14.19, so we follow suit with the reference BSPs. (From meta-yocto rev: 072b9dc5d0643c397d053bb00e541be5c285b9cd) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* beaglebone.conf: add IMAGE_BOOT_FILESMaciej Borzecki2014-09-231-0/+2
| | | | | | | | | | | | Set IMAGE_BOOT_FILES to list of files that end up in boot partition. This in turn is used by wic to generate a bootable SD card image. (From meta-yocto rev: 4ee4785154c1702ecfb8389f3c6ab99957a2f1d0) Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-bsps: update SRCREVs to linux-yocto latestBruce Ashfield2014-09-011-5/+5
| | | | | | | | | Bumping the reference boards to the linux-yocto 3.14 latest SRCREVs. (From meta-yocto rev: 0fed8753eed45b29150f203b87cce25462596e9c) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-bsps: remove 3.4 bbappendBruce Ashfield2014-09-011-7/+0
| | | | | | | | | | The oe-core 3.4 recipes have been removed, so we drop our associated bbappend from the yocto-bsps. (From meta-yocto rev: 75c25180bb85e48b4029dbd444a681bfaee85b4b) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/controllers/beaglebonetarget.py: fix deploy when kernel file is a ↵Corneliu Stoicescu2014-07-171-1/+1
| | | | | | | | | | | | | | | broken link Sometimes the uncompressed rootfs image contains boot/uImage but if it's a symlink, it seems broken from the master image's point of view. Because [ -e /mnt/testrootfs/boot/uImage ] will return 1, it will proceed to copy the backup kernel file over it but cp ~/test-kernel /mnt/testrootfs/boot/uImage will also fail with: cp: not writing through dangling symlink Adding a new check here, if the boot/uImage is a link, leave it as is. (From meta-yocto rev: 849b1e319a84a710259223f57b2e4c74bc64fe75) Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grubtarget.py: Change 'test' GRUB entry selection methodCorneliu Stoicescu2014-07-041-1/+1
| | | | | | | | | | | Using character combinations for <arrow down> to select the test image will not always work. Using the '--hotkey x' option added to the 'test' GRUB menuentry to select the 'test' GRUB entry. (From meta-yocto rev: 962003f77258bd7d1e8b3fb034c6e256c7879c8d) Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsp: oeqa/controllers: add GrubTargetCristian Iorga2014-07-041-0/+71
| | | | | | | | | | | add control for generic grub pc via serial line Implementation [YOCTO #5615]. (From meta-yocto rev: dc3d298688c2265b023219c81124065c36eeb417) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Revert "meta-yocto-bsp: oeqa/controllers: add GrubTarget"Richard Purdie2014-07-041-71/+0
| | | | | | | | This reverts commit 01968e9244d0cf3deb1ec5cfb8e562d3b364add6. Wrong repo Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsp: oeqa/controllers: add GrubTargetCristian Iorga2014-06-231-0/+71
| | | | | | | | | | | add control for generic grub pc via serial line Implementation [YOCTO #5615]. (From OE-Core rev: 01968e9244d0cf3deb1ec5cfb8e562d3b364add6) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsps: update 3.14 SRCREVsBruce Ashfield2014-06-171-5/+5
| | | | | | | | | Updating the h/w reference BSPs to the latest 3.14 content. (From meta-yocto rev: 3b0e8596eb3154a1d2dc1653afc9ea9c72db2fc6) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mpc8315e-rdb: add the jffs2 image supportKevin Hao2014-06-171-0/+3
| | | | | | | | | | | | | There is a 32M NAND flash on this board, so it would be convenient that a jffs2 image is created by default. Also change the default image type from "tar.gz" to "tar.bz2" in order to be compatible with the beaglebone black and edgerouter BSP. (From meta-yocto rev: e2e0d9eee91a773c0e9a151f20d859525821a767) Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mpc8315e-rdb: bump to linux-yocto 3.14Kevin Hao2014-06-172-1/+4
| | | | | | | | (From meta-yocto rev: d43b5963c486b8c4846d1cc8b66bf8bfcaf05d8a) Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* controllers/edgeroutertarget.py: enable dynamical determination of rootfs typeCorneliu Stoicescu2014-06-171-2/+3
| | | | | | | | | [YOCTO #6375] (From meta-yocto rev: 375ab07adf29e94ae09b7c087dec4ca1443babfc) Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* controllers/beaglebonetarget.py: enable dynamical determination of rootfs typeCorneliu Stoicescu2014-06-171-2/+3
| | | | | | | | | [YOCTO #6375] (From meta-yocto rev: 953b51b2ba5862ad24e2ad4f6cf9cefff7af14c9) Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* beaglebonetarget.py: Add support for get_extra_files() classmethodCorneliu Stoicescu2014-06-171-5/+8
| | | | | | | | | | | [YOCTO #6254] Adding support for the get_extra_files() method to the BeagleBoneTarget class. (From meta-yocto rev: b719ff579fe2a5f5a0d19a9091eaa37e0f145384) Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/controllers/beaglebonetarget.py: fix conditions for files copied to /bootCorneliu Stoicescu2014-06-031-2/+2
| | | | | | | | | | | | | Using '[ ! -e /mnt/testrootfs/boot/uImage ] && cp ~/test-kernel /mnt/testrootfs/boot/uImage' would result in exit code 1 if the first condition is not met. Changing the code to return exit status 0 if /mnt/testrootfs/boot/uImage exists. Also adding this change to dtb files check. (From meta-yocto rev: e06e354165673bfb6b531d1f78c468b4c56dbd18) Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* genericx86: switch to Linux 3.14 from 3.10Ross Burton2014-06-011-1/+1
| | | | | | | | | Boot-tested on a NUC. (From meta-yocto rev: ef7e8d3f250c66ff6ab422c9527fd8b3a5386234) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsp: oeqa/controllers: add EdgeRouterTargetPaul Eggleton2014-04-301-0/+89
| | | | | | | | | | | | | | Based on BeagleBoneTarget, this provides support for deploying images and running tests on an EdgeRouter Lite (edgerouter). The device must be set up to boot into the master image already - see the instructions in the file. Implements [YOCTO #6253]. (From meta-yocto rev: 6e28284f0dacb40f7533161bfaeb637723297947) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsp: oeqa/controllers: add BeagleBoneTargetStefan Stanacar2014-04-302-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | With a serial connection and beaglebone setup correctly as per README.hardware (nand erased, default uboot config assumed, etc) and a correctly deployed core-image-testmaster, we could actually deploy and test AB built images. In the default configuration u-boot will do the right thing and will always boot into the master image (rootfs on second fs on the card, kernel in /boot on the same partition). We just need to tell it for the test image to use the third partition and update the kernel cmdline. Pexpect is used to interact with whatever serial connection we have (which for this target is mandatory). There is some handling for images that don't contain the kernel and dtb files as needed (such as core-image-minimal). Implements [YOCTO #6252]. (From meta-yocto rev: 8235464faf480811b17b062cb9aad8ebf1cd2a67) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-bsps: update to v3.10.35Bruce Ashfield2014-04-231-3/+3
| | | | | | | | | | Updating the remaining 3.10 reference BSPs to the oe-core 3.10 -stable version. (From meta-yocto rev: 95deee86f95e0859704da3e74b4faca77999592a) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-bsps: update references to v3.4.85Bruce Ashfield2014-04-231-1/+1
| | | | | | | | | Update the remaining 3.4 reference BSPs to the latest oe-core -stable update. (From meta-yocto rev: f620e97f73698cff905801466421610247df4ade) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* beaglebone.conf: configuration updatesDenys Dmytriyenko2014-04-101-5/+5
| | | | | | | | | | | | | * Use fbdev video driver for xserver-xorg * Recommend installing device tree DTB files into rootfs /boot directory * Switch back to uImage kernel format from zImage, as U-boot was not updated - default has changed to zImage in newer U-boot 2013.10+, but we use 2013.07 * Correct copy/paste typo in serial console (From meta-yocto rev: 22f4158a8d64defe9acde902eda73ce2a380f10f) Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* routerstationpro: dropPaul Eggleton2014-04-043-38/+0
| | | | | | | | | | This has been moved to meta-yocto-bsp-old; edgerouter replaces it as the MIPS reference platform going forward. (From meta-yocto rev: 74ae863b27878555445955337b19118968fabf6d) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* beaglebone: fix typo in the U-Boot config nameDenys Dmytriyenko2014-03-311-1/+1
| | | | | | | (From meta-yocto rev: be083ee47192e11d16612f22fc600fd9e49d2893) Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-yocto-bsp: Bump layer version after the BSP changesRichard Purdie2014-03-311-1/+1
| | | | | | (From meta-yocto rev: e4369b7f9f5c5cb533dbaa40a1e8a88d79c2b2f1) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Drop beagleboard, replaced by beagleboneRichard Purdie2014-03-316-110/+0
| | | | | | (From meta-yocto rev: b125761e5e31fc506f7b5b87308850cd573ab1b6) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* beaglebone: Switch to linux-yocto 3.14Richard Purdie2014-03-311-2/+2
| | | | | | (From meta-yocto rev: c178be238b92212dc866f8e039aaa84003aaafda) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* beaglebone: add OE machine definition for use with linux-yocto kernelsDenys Dmytriyenko2014-03-311-0/+37
| | | | | | | | | | | Kernel support is now in linux-yocto-dev and will be moved to a versioned recipe once 3.14 is released. (From meta-yocto rev: ba78fa236b4993efd4c2502413e92fa659c2f28b) Signed-off-by: Denys Dmytriyenko <denys@ti.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-bsps: edgerouter: explicitly set preferred versionBruce Ashfield2014-03-311-1/+2
| | | | | | | | | | Switch the edgerouter from linux-yocto-dev, to the 3.14 linux-yocto BSP. (From meta-yocto rev: a1d02927130842c45201c1af46180e8231dcea1c) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-bsps: Add a new BSP to support edgerouterYang Wei2014-03-311-0/+21
| | | | | | | | | | | | | | | | | | | | | | | The EdgeRouter Lite is part of the EdgeMax series. It is an MIPS64 router(Cavium Octeon) with 512MB of RAM, which uses a USB pendrive for storage. Setup instructions ------------------ You will need the following: * NFS root setup on your workstation * TFTP server installed on your workstation * Straight-thru 9-conductor serial cable (DB9, M/F) connected from your PC to UART1 * Ethernet connected to the first ethernet port on the board The rest of the details can be found in the BSP kernel config, and README.hardware. (From meta-yocto rev: 473067887b9e04366c370ab123bcd14eff33fd9a) Signed-off-by: Yang Wei <Wei.Yang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-bsps: update reference BSPs to v3.10.34Bruce Ashfield2014-03-311-5/+5
| | | | | | | (From meta-yocto rev: 285b31ab27474c2463fdfa08a9fb02c3ff6dc20b) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>