summaryrefslogtreecommitdiffstats
path: root/bitbake
Commit message (Collapse)AuthorAgeFilesLines
* bitbake/knotty: print task failure summaryPaul Eggleton2012-01-152-6/+22
| | | | | | | | | | | | | | | | Remove the error logged within cooker summarising the list of failed tasks, and instead print this in the UI (knotty) where it belongs. This also adds the actual name of the task that failed as well as the corresponding recipe file that was being shown previously. In addition, reformat the summary messages more tidily - no extra breaks between lines and use correct English singular/plurals, with some allowance for future translation. (Bitbake rev: cdf69913f99d28bc7f51067a60257701f952c6cb) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/cooker: avoid printing stack trace for -b match errorPaul Eggleton2012-01-151-6/+11
| | | | | | | | | | | | | | | | | | | | | Improves error output for matching problems when the -b / --buildfile command line option is used. Rename MultipleMatches exception to NoSpecificMatch (as it is also raised when there are no matching recipes) and make it inherit from BBHandledException so that it doesn't print a stack trace (we always log an ERROR prior to raising it.) In addition, improve the formatting of the error message - only call the log function once rather than once for every match, and use a more appropriate message if there are no matches. Fixes [YOCTO #1141] (Bitbake rev: 803550a5098ec878164245e71344c3d687310b72) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/fetch2: reduce output for fetch failuresPaul Eggleton2012-01-151-1/+6
| | | | | | | | | | | | | | | | | | | Make the warning for the initial fetch failure a single line - we don't need the full command and output here yet, but write it into the log in full as a debug message. However, if fetching from mirrors fails as well then print out the full details for the first error that occurred as an ERROR rather than a WARNING. Since this is logged as an ERROR, combined with an earlier patch it suppresses the full log which does make the output much more readable for any fetch error. Fixes [YOCTO #1832]. (Bitbake rev: 6bbdc7d259c0cc041b62dbdb26cfc3ec6edcb6f3) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/knotty: avoid printing full task log when error already printedPaul Eggleton2012-01-152-4/+16
| | | | | | | | | | | | | | If a task has logged an ERROR then don't print the contents of the task's log file in knotty (the default terminal UI). As a side-effect we now also respect BBINCLUDELOGS in knotty; if it is false we never print the log (but the pointer to the log file is always printed). (Bitbake rev: b9746b7e4d7aa5c34eba15a61427bfc6949af123) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/fetch2: correctly decode exit signal/statusPaul Eggleton2012-01-151-4/+7
| | | | | | | | | | | | | The termination signal and exit code of the fetch process were not being decoded correctly, resulting in bitbake reporting that the process terminated with a signal of the exit code (if it was under 255). There are functions in the Python os module to do this decoding correctly (for Unix at least), so let's use them. (Bitbake rev: 50aea9a76e40cf71cc3f1462c88298e4846a031c) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/runqueue: avoid "failed" in task summary if nothing didPaul Eggleton2012-01-151-1/+5
| | | | | | | | | | | | | | | | Seeing the word "failed" alone without reading the whole context has occasionally triggered an automatic assumption on the part of some users (myself included) that something has gone wrong, even when this message is telling you that "0 [tasks] failed". To avoid this let's just say "all succeeded" in this case instead. As a bonus this means you can now search the output for "fail" and not find anything if all went well. (Bitbake rev: b6f067af12d4661758a78788f1db472684b9aba8) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/fetch2: improve error formatting for fetcher errorsPaul Eggleton2012-01-152-5/+8
| | | | | | | | | | | | | | | * The "name" argument to FuncFailed is rarely used as a name in actual usage within bitbake, so don't treat it as one in the output. * Don't print URL for FetchError if it was not specified (i.e. don't output "Fetcher failure for URL 'None'") * Don't include URL in "unable to fetch from any source" message since we supply it to FetchError and it will be printed anyway. * Don't include URL in "checksum failed" message for the same reason (Bitbake rev: 86811bd85e2e453ee92a05fe60160d9b49ac69e8) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/knotty: don't count errors as warnings in summaryPaul Eggleton2012-01-151-1/+1
| | | | | | | | | | The count of warnings being shown in the summary at the end was also including the number of errors. (Bitbake rev: d242d6ca81dd83b2b13a3ac77ac4cd829a69cf83) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: Automatically start local PR service.Lianhao Lu2012-01-114-45/+123
| | | | | | | | | | | | | | | | | [YOCTO #1126] A local PR service will be started and stopped automatically along with the bitbake invocation/ternimation. This local PR service will be started only and if only when the PRSERV_HOST is set to 'localhost' and PRSERV_PORT is set to '0'. When started, the sqlite3 database is stored at "${PERSISTEN_DIR}/prserv.sqlite3" or "${CACHE}/prserv.sqlite3". (Bitbake rev: 9d8f45407c67ed0d3c4f820cf646de3c385067c7) Signed-off-by: Lianhao Lu <lianhao.lu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/PRservice: Added no_hist mode and export/import.Lianhao Lu2012-01-114-80/+263
| | | | | | | | | | | | | | | | | | | | | | | | | [YOCTO #1556] 1. Added the package_arch into the index to the DB table. Because the change in PACKAGE_ARCH will results in different checksum, and it is better to have seperate PR value domains for differnt PACKAGE_ARCH of the same pakcage. 2. Changed the PR service to operate in no history mode. In this mode, the for a given query tuple (version, pkgarch, checksum), the returned value will be the largest among all the values of the same (version, pkgarch). This means the PR value returned can NOT be decremented. 3. Added export function. For each (version, pkgarch) tuple, only the record with the maximum value will be exported. 4. Added import function. The record will only be imported if the imported value is larger than the value stored in the DB with the same (version, pkgarch, checksum) tuple. (Bitbake rev: 379567ee879dcdc09a51f7f1212bde1076147a6f) Signed-off-by: Lianhao Lu <lianhao.lu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: Add BBHandledException exception classRichard Purdie2012-01-103-4/+19
| | | | | | | | | | | | | | | | | | | | | | | We have a problem knowing when to show the user debug information and when not to since the code has already shown the user suitable information about why a failure is occurring. This patch adds a bb.BBHandledException exception class which can be used to identify those exceptions which don't need further explanation to the user. This patch uses this class for the bb.providers exceptions and ensures the command handling code correctly filters the exceptions meaning that "bitbake invalid" now shows an simple error message and not a python traceback. [YOCTO #1141 partial] (Bitbake rev: eac9249b40ae1e3aa21e016010c862664e59a8d4) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/knotty: Show summary of warning/error messages shownRichard Purdie2012-01-101-2/+11
| | | | | | | | | | | Show a summary count of warning/errors messages shown to the user during the build and make it clear when an error exit code is being set. [YOCTO #1540] (Bitbake rev: 9943bad611a974e4d37a00c7a4de1752250370c5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake-layers: close files in apply_append()Paul Eggleton2012-01-101-0/+2
| | | | | | | | | | It's recommended practice to close files when finished with them and the code in this function was not doing this. (Bitbake rev: 470a160813ce6cf04f83258d46ded5c2ab8bc520) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake-layers: flatten: warn the user if output structure is incorrectPaul Eggleton2012-01-101-0/+38
| | | | | | | | | | | | | | | | | | If you flatten layers that have different directory structures you may not end up with a usable layer in the output directory - some files won't be picked up by BitBake. To try to avoid this problem, once flattening has completed, get the BBFILES entries that correspond to the layer from which the output layer's conf/layer.conf came from, and check through all of the .bb/.bbappend files in the output directory to see if any will not be referred to by BBFILES in the output layer. If any are found, show a warning to the user. (Bitbake rev: 8e4dc97614f2022855143b49d18795ca0352b237) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake-layers: flatten: allow specifying layers to flattenPaul Eggleton2012-01-101-8/+67
| | | | | | | | | | | | | | | | | | You can now optionally specify two or more layers to flatten into the output, rather than flattening all of the layers in the current configuration (but this is still the default behaviour if no layers are specified). Note that this means the output layer may still contain bbappends where the corresponding recipes are not present in the list of layers to flatten. There is also a caveat when a layer not being flattened would be "inbetween" the flattened layers (see the command help for details.) Implements feature request in [YOCTO #1564]. (Bitbake rev: 379b12107ec921b4458eda320078374a509164c1) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* command.py: add parseConfigurationFiles APIDongxiao Xu2012-01-061-0/+10
| | | | | | | | | | The parseConfigurationFiles API calls the related function in cooker.py to parse config files. (Bitbake rev: 96c307b9874131ad8c7d9caea6f6dfbd09aab9d4) Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: add a new option "--server-only"Dongxiao Xu2012-01-061-7/+16
| | | | | | | | | | | | | | | Create a new option "--server-only" for bitbake command, which allows bitbake runs as a server, and let frontend connect the server itself. "--server-only" should work with "-t xmlrpc", or bitbake will exit. bitbake --server-only -t xmlrpc will print out the server address and port information. (Bitbake rev: 2677254cf9792cee083605267570d93b425cc2db) Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cooker: remove command import in cooker.pyDongxiao Xu2012-01-063-0/+31
| | | | | | | | | | | | | There is no direct use of command in cooker.py, and it is using bb.command instead. Remove command in the import list. This fixes a problem of embedded import between command.py and cooker.py. (Bitbake rev: c353316b2efcc7a893d6b4aa9a9647d51a6f69e3) Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cooker: remove command import in cooker.pyDongxiao Xu2012-01-061-2/+2
| | | | | | | | | | | | | There is no direct use of command in cooker.py, and it is using bb.command instead. Remove command in the import list. This fixes a problem of embedded import between command.py and cooker.py. (Bitbake rev: 92fec2788e33d301cc63848901bc6adc764a2ecf) Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xmlrpc: Change BitbakeServerInfo init functionDongxiao Xu2012-01-061-4/+4
| | | | | | | | | | | Pass host and port to BitbakeServerInfo class instead of the "server" instance. With this change, GUI can connect with server individually by host address and port. (Bitbake rev: 5124351d6c287185723c98e6e4400c5402a5c8a8) Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* command.py: add initCooker APIDongxiao Xu2012-01-062-0/+19
| | | | | | | | | | initCooker is to set the cooker to the initial state with nothing parsed. (Bitbake rev: 8ee9c6cc47938604268242d90bd3007218f9a36e) Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cooker: user bb.configuration.data to inject eventsDongxiao Xu2012-01-061-2/+2
| | | | | | | | | | | For buildTargets function, we use bb.configuration.data as parameter to inject events, since in hob environment, some variables are modified dynamically and bb.configuration.event_data may out of date. (Bitbake rev: 487a124942fd5cd9de71413b79a4049a6d26f1e8) Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* command.py: Modify needcache value for certain functionsDongxiao Xu2012-01-061-2/+2
| | | | | | | | | | | for findConfigFiels() and findFilesMatchingInDir() functions, they don't need to parse all the bb files, thus setting the needcache value to be False. (Bitbake rev: 3ef73dee8b08ccfd15a4901cce315a99b22e71d7) Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/runqueue: Improve the setscene loggingRichard Purdie2012-01-051-0/+4
| | | | | | | | | When debugging setscene problems it was found that some extra debug messages were useful. This patch adds them. (Bitbake rev: cff2c258b77fde01d530a5923e553e6111b15eb5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fetch2/git: change colon to dot in ud.hostJuraj Hercek2012-01-041-1/+1
| | | | | | | | | | | | | | | | | | | Local cloning of git repositories from DL_DIR into WORKDIR fails when using ssh URL with port specification e.g. "ssh://user@host:port/path/to/repo.git". Git fetcher clones such remote repository into "${DL_DIR}/git2/host:port.path.to.repo.git". However, when clonging from ${DL_DIR}/git2/host:port.path.to.repo.git into ${WORKDIR}, git fetcher fails with "ssh: Could not resolve hostname ${DLDIR}/git2/host: Name or service not known". A solution is to replace ":" by "." in host component, similarly as it is done when replacing "/" with "." in path component, so that local clone directory in DL_DIR looks like this: "host.port.path.to.repo.git". (Bitbake rev: 1f2867b79f1cd2bfbdc849ba5677a39db6fa3396) Signed-off-by: Juraj Hercek <juraj.hercek@jhksoftware.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake-layers: fix Python error during parsePaul Eggleton2012-01-041-0/+1
| | | | | | | | | | | | | | | | | | If "bitbake-layers show_layers" was run when the cache was dirty forcing a parse, it failed with the following error: ERROR: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception AttributeError: 'module' object has no attribute 'fetch2' A simple import of bb.fetch2 in bitbake-layers fixes this. Fixes [YOCTO #1855]. (Bitbake rev: a228f0a32c2c14d62effbbba5f4fada4cd3817f6) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ui/crumbs/hobprefs: trigger a reparse after changing IMAGE_FSTYPESJoshua Lock2011-12-201-0/+1
| | | | | | | | | | | | | | | As reported on the mailing list[1] when changing IMAGE_FSTYPES through the hob preferences a reparse is required before the changes will be picked up by the system. This patch sets the reload_required property of the class to true when the image types have been modified to ensure the reparse is triggered. 1. https://lists.yoctoproject.org/pipermail/yocto/2011-December/006002.html (Bitbake rev: 6c0babf08909307ab69a66ed06e77e8818b2a8c5) Signed-off-by: Joshua Lock <josh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ui/crumbs/runningbuild: handle InvalidTask eventsJoshua Lock2011-12-201-0/+4
| | | | | | | | | | | | The knotty UI just ignores these and so should RunningBuild, if these events aren't handled the UI appears to hang. Fixes [YOCTO #1665] (Bitbake rev: 540ba78075bd525776aa23bf38bee66350c66534) Signed-off-by: Joshua Lock <josh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* vim/syntax: Recognize ?? operatorKhem Raj2011-12-201-2/+2
| | | | | | | (Bitbake rev: 5337ed86820ab0a2cbb3fd82eb11edb807c47f54) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* siggen.py: If both sigs have a variable in it's whitelist then don't say ↵Matthew McClintock2011-12-051-3/+3
| | | | | | | | | | | | | it's changed Some BB_HASHBASE_WHITELIST variables are in the lists of variable dependencies for signatures. Ignore those differences in lists since this difference does not matter (Bitbake rev: 71b53a3f0766ca464560a1f6a449f9424fbdf7ae) Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove the async_cmds and sync_cmds from command.pyRobert Yang2011-12-051-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In bitbake/lib/bb/command.py::Command::__init__, we have the following lines: for attr in CommandsSync.__dict__: command = attr[:].lower() method = getattr(CommandsSync, attr) sync_cmds[command] = (method) for attr in CommandsAsync.__dict__: command = attr[:].lower() method = getattr(CommandsAsync, attr) async_cmds[command] = (method) The sync_cmds and async_cmds are defined as global dictionaries, but it seems that we've never used them (I did a "grep -r async_cmds bitbake/", , there is no result except the ones that I have removed), and I can't find the history of it from "git log -p", I guess that they have been replaced by the self.cmds_sync and self.cmds_async. [YOCTO #1791] (Bitbake rev: 24e99460800856035bb54a84c7aa33b3517436e9) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fetch2: fix Exception parameters when BB_STRICT_CHECKSUM enabledJoshua Lock2011-12-051-3/+3
| | | | | | | | | | | | BB_STRICT_CHECKSUM caused a backtrace as the FetchError parameters are incorrectly specified such that FetchError is being passed 8 params when it's expecting 3. This fixes the parameters so we're passing a formatted string and the url. (Bitbake rev: b8b2f4287c9125542b18a294c0a94ed89a7e73a8) Signed-off-by: Joshua Lock <josh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove the duplicated assignments of self.configuration.cmdRobert Yang2011-12-051-3/+0
| | | | | | | | | | | | | | | | | | The assignments of self.configuration.cmd in BBCooker seems duplicated, have the followings in both BBCooker::__init__ and BBCooker::loadConfigurationData: if not self.configuration.cmd: self.configuration.cmd = self.configuration.data.getVar("BB_DEFAULT_TASK", True) or "build" The __init__ invokes the loadConfigurationData, and it would make sure that self.configuration.cmd has been assigned a proper value, so we can remove the one in __init__. [YOCTO #1791] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cooker.py: Allow the -e option to work with virtual classes and -bRichard Purdie2011-12-011-1/+3
| | | | | | | | | | | | | Using bitbake -e -b virtual:xxxx:/path/to/the.bb would result in zero matches since the virtual:xxxx piece wasn't being processed. This adds in the necessary functionality to handle it correctly. [YOCTO #1793] (Bitbake rev: bd5a727c8447bcb747c1d2463b7de2ab6d21a7de) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* build.py: Be determistic about a function's cwdRichard Purdie2011-12-011-2/+1
| | | | | | | | | | | | | | | | | There is a subtle but nasty problem that a function's cwd can vary depending on whether ${B} (often ${S}) exists before the funciton is called or not. Most functions in the system can cope with this but its bad practise and I've just witnessed build failures resulting from this during image generation from bootimg.bbclass. I also suspect this could explain some odd fetcher behaviour witnessed in the past. This change ensures we always call funcitons with a specific build directory making things deterministic. (Bitbake rev: ef0888f83fa4408eb768257d7e03700202faad18) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: Update users of getVar/setVar to use the data store functions directlyRichard Purdie2011-11-2724-198/+196
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/siggen.py: Don't backtrace if the taskhash data isn't presentRichard Purdie2011-11-251-2/+2
| | | | | | | | | | This allows the code to safely fall back to dumping the basehash data if the taskhash data isn't present for some reason. We could effecitvely obsolete the runtime option and use this approach instead exclusively. (Bitbake rev: 5ace320ccc01f4e326f90b7ba060dcbff3380dca) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: Update and fix bitbake-runtaskRobert Yang2011-11-251-66/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since bitbake switched back to the fork instead of the exec model, it no longer used bitbake-runtask and the code has suffered some bitrot. bitbake-runtask is a useful tool for excuting the task without the scheduler of bitbake, so that the external tool can invoke it easily. It also provides a useful example of how to invoke exec_task() with low overhead without a lot of the bitbake threading/UI overhead. Significant changes: * This patch changes the argument order so that the commonly used and mandatory arguments come first. * The taskhash file and dryrun options are now optional * It now uses the bitbake logging mechanisms to provide processed logging output to the console. * The process handling to do with stdout/stderr redirection are removed since they're no longer required. [YOCTO #1229] RP: Logging updates to the patch based on Roberts original patch Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Nothing uses USERNAME, remove it - can cause sstate-cache conflictsMatthew McClintock2011-11-251-1/+0
| | | | | | | | | | USER is the correct variable to use, also this can affect sstate cache as well. (Bitbake rev: d7f9edda65dae2e046871afa275c5a51dff48fc4) Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* data/siggen: Add vardepvalue mechanism to allow the variable dependency code ↵Richard Purdie2011-11-242-11/+15
| | | | | | | | | | | | | | | | | | | | | | | to be forced to specific values We have a problem if we want to inject specific information into the variable dependency code. There are cases for example where we want a dependency on the value of X but it doesn't matter how X was constructed or what dependencies it might have had, we only care about the absolute value. With the current code, its near enough impossible to do this. This patch adds such a mechanism so the user can trigger this with code like: baselib[vardepvalue] = "${baselib}" It also refactors some of the code so we do variable lookups once instead of doing this in two different functions. [YOCTO #1583] (Bitbake rev: 6c879b44ccf42dc73fe4467076e114700d7ba81b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fetch2: Improve uri_replace to handle paths with no trailing '/'Richard Purdie2011-11-241-3/+10
| | | | | | | | | | | | | | | | | | | | | | Currently if you specify a mirror like: file://.* http://linux.freescale.net/yocto/sstate-cache it won't work as you expect whilst: file://.* http://linux.freescale.net/yocto/sstate-cache/ will since it has the trailing slash. This patch handles both cases correctly. It also adds some debug to the uri_replace function since its near impossible to debug it without some kind of output. [YOCTO #1578] (Bitbake rev: a0246bf09c93bb657eaf6ba61d090b247ed33640) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* knotty: Add support for logging the console to logfileRichard Purdie2011-11-241-0/+6
| | | | | | | | | | | | The BB_CONSOLELOG variable is used to specify the console log file to use. This means people can look up things that happened during a build by may have scrolled off the screen. [YOCTO #1771] (Bitbake rev: a34ff490a46577a64345365fa1ac39c48d0861cd) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqueue.py: Fix debug message to reference the correct taskRichard Purdie2011-11-241-1/+2
| | | | | | (Bitbake rev: 035c673c463ca450245acf824e7b7e8f889bdc89) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fetch2/local: Don't default to files in DL_DIR for file:// urlsRichard Purdie2011-11-241-3/+1
| | | | | | | | | | | | | | | Defaulting to any file in DL_DIR as the first match for a file:// url doesn't make much sense and can lead to unexpected results. This patch changes the logic so this is the last fallback location instead. Whether it should be using DL_DIR at all for this is a good question but something for another patch. [YOCTO #1710] (Bitbake rev: 5597a68fac0954c682b67471722c2643e2415f99) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* siggen.py: sort task hash depedencies with basepathMatthew McClintock2011-11-231-11/+14
| | | | | | | | | | | | | | | Without this patch the tash hash dependencies can be in a order that is dependent upon directory/filesystem layout. With this change the data is sorted the same regardless. Without this the dependent hashes could be in different orders on different systems and consequently final md5 hash would differ as well even though nothing else changed. (Bitbake rev: 9a2029899c946ce9aa8adbc85f2cfe7a85b92182) Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: print out symmetric difference when comparing sigsMatthew McClintock2011-11-231-0/+4
| | | | | | | | | | This is useful for really longs lists to pinpoint what has actually changed (Bitbake rev: f1eb6d3dcc10c42bb09383a87bde3afa69bc6ed9) Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqueue.py: Ensure we fully process the covered listRichard Purdie2011-11-231-3/+4
| | | | | | | | | | | | | | | The existing looping code can mask an existing "found = True" by forcing it to False each time. This can lead to dependency lists not being fully searched and results in dependency errors. An exmaple of this was the autobuilder building linux-yocto from sstate but then rebuilding some of the recipe's tasks for no apparent reason. Separating the logic into two variables solves this problem since any "found = True" value is now always preserved. (Bitbake rev: 61017fc5d30b7a13308d038872ec92efc1a84cef) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqueue.py: Ensure setscene tasks don't break dependency orderRichard Purdie2011-11-231-4/+7
| | | | | | | | | | | | | | | If A depends upon B which depends upon C and the setscene for B succeeds but C is going to get rebuilt, we should wait for C to try and build A but currently we don't. This is due to the timing of when we run the task_skip() as this triggers other tasks to become buildable. This patch moves the timing of that call to a more appropriate place allowing dependencies to behave as expected. (Bitbake rev: b7114d8e5d9b0720339bd5d24d243c0f2a7c1f3b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/runqueue.py: Add BB_SETSCENE_VERIFY_FUNCTION hookRichard Purdie2011-11-221-11/+9
| | | | | | | | | | | | | | | | | The OE metadata has cases where it needs to prevent some setscene functions from running. An example of this is where we know a task is going to run do_configure (which would clean out do_populate_sysroot) and hence we don't want do_populate_sysroot_setscene to run. This change adds in a hook so that the metadata can allow any such policy decision to filter back up to bitbake. It removes the existing code which attempted to do this in a generic way but failed. (Bitbake rev: 2f6d987d9957a5d713ce119c24c2e87540611f53) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake/runqueue.py: Sort the list of skipped tasks as it makes searching ↵Richard Purdie2011-11-211-1/+1
| | | | | | | | | | the list easier when debugging (From Poky rev: 5de8a495fba657e1febc616bbc737a8136cc88f9) (Bitbake rev: 110f6cccbcc5907e15262c05d5c47da101e1a47d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-02-24 18:58:52 +0000