summaryrefslogtreecommitdiffstats
path: root/bitbake/lib/bb/cooker.py
Commit message (Collapse)AuthorAgeFilesLines
* bitbake: cooker: add BB_CMDLINE to enable access to UI command line with memresPaul Eggleton2017-09-211-1/+6
| | | | | | | | | | | | | | | | | | | | | | | In OpenEmbedded's buildhistory class we want access to the bitbake command line that launched the build, and up to now we were simply using sys.argv from within the event handler to get that. Unfortunately that doesn't work in memory resident mode, since the event handler is naturally executing within the server and thus will give you the command that launched the bitbake server which is much less interesting. Add a dynamic variable BB_CMDLINE to provide access to this, set from sys.argv within the UI process in updateToServer(). (Note that BB_CMDLINE isn't currently passed through to the worker, so this is only really readable from event handlers plus any explicit getVariable calls - in theory an observe-only UI could read it for example.) Part of the fix for [YOCTO #11634]. (Bitbake rev: 85596c9af3bb6407159c6c8de229cbe275aa74ea) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker.py: Fix layer priority processingMark Hatle2017-09-211-7/+7
| | | | | | | | | | | | | | | | | If you have a layer with a blank BBFILE_PATTERN the layer was ignored when processing the list of layers with priorities. This list is not only used for processing recipes, but also by additional programs such as bitbake-layers show-layers. Without this change, a layer that provides configuration or classes only does now show up in show-layers, which is used by the yocto-compat-layer.py script. This causes a failures in the compatibility check. (Bitbake rev: 1db8336cee8cd22aaaa67e3dde5b9218840ba4a1) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: ensure monkey-patching in collect_bbfiles() gets undone on ↵Paul Eggleton2017-09-211-19/+19
| | | | | | | | | | | | | | | | error In collect_bbfiles() we're monkey-patching os.listdir in order to find which directories to watch, and then undoing that when we're finished - however if an exception occurred for any reason there was nothing to ensure the latter occurred. This may not have caused any issues, but as this kind of thing really ought to be secured using try...finally just in case, so do that. (Bitbake rev: 021e0eda63bd629af56b5e1c380c5f98868f7332) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: fix watching empty directoriesPaul Eggleton2017-09-211-3/+6
| | | | | | | | | | | | | | | | | | | The code that was supposed to watch directories along BBFILES for creation of new files wasn't working in the case where the directory did not initially contain any matching files - since in updateCache() we are passing the directory path to add_filewatch() and the latter function calls os.path.dirname() on the path on the assumption that it is a file path, and thus the parent of the directory got watched but not the directory itself. (If the directory wasn't empty everything worked fine since add_filewatch() was called elsewhere with the path to one of the files in that directory, and thus the directory got watched). Add a parameter to add_filewatch() to tell it we are passing it directory path(s) rather than file path(s). (Bitbake rev: b0b36ff889715227e394c59a36326c31ea21b96b) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: Track directories searched for bbappend/bb filesRichard Purdie2017-09-211-3/+21
| | | | | | | | | | | | | | | | | Some of the directories searched by BBFILES are not currently being added to the inotify watch list. This can mean that added append files are not noticed leading to misleading metadata results when using BB_SERVER_TIMEOUT != 0. We use glob to expand the BBFILES references and without writing our own implentation, figuring out the directories it searches is hard. We use some horrible hacks here to intecept the listdir calls, I'm open to better ways to handle this but this does ensure we have the right watches set. (Bitbake rev: a161ea021a1e309c25d1adc09e6e3fc58442c893) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker.py: use correct multiconfig prefix in dependency graphPatrick Ohly2017-03-231-1/+1
| | | | | | | | | | | | The dependency graph in the bb.event.DepTreeGenerated and the corresponding pn-buildlist and task-depends.dot from "bitbake -g" contained entries like multiconfig:qemuarm.gcc (dot as last separator) instead of the correct multiconfig:qemuarm:gcc (colon as separator). (Bitbake rev: cccd1578d84f041cd0c2dcddb91f317c69af70de) Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: data/cooker: Sort output data shown by -eRichard Purdie2017-03-221-1/+1
| | | | | | | | | | Displaying the environment data in a sorted manner makes it easier to compare data between different setups and means you can know where to find specific entries. (Bitbake rev: baa417e44b009149eb1dfb07d5a488740b6e68ef) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: detect malformed BBMASK expressions which begin with a ↵Andre McCurdy2017-02-191-0/+5
| | | | | | | | | | | | separator When constructing an older style single regex, it's possible for BBMASK to end up beginning with '|', which matches and masks _everything_. (Bitbake rev: 56ad67017e601c7e0f6085ca84e29c28d8d4519f) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: Rewrite dependency dot file generationRichard Purdie2017-02-191-53/+45
| | | | | | | | | | | | | | | | | | | | | | | | The package-depends.dot and pn-depends.dot files are inaccurate, missing out key dependencies such those made via the [depends] flags. As such they can be misleading to the user. They mainly exist for historical reasons, coming from a time before we had task based execution. This commit removes the two dated file formats and replaces them with a recipe-depends.dot which is a flattened version of task-depends.dot. The old format files are removed if present so that the user can't get confused about why data might not match between files. The code is also rewritten to use 'with f: f.write()' syntax as is more commonly used now. Also update the docs to match the change. (Bitbake rev: d3e182bc18ff2894f1efc8aad3d508dd432c996e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker.py: run sanity checks for multiconfigJuro Bystricky2017-02-151-1/+2
| | | | | | | | | | | | Also run sanity check for all additional multiconfig configurations as listed in BBMULTICONFIG, not just the "default" configuration. [YOCTO#10810] (Bitbake rev: b9777374cbe63cdcf80767033f628c26d23e90f9) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: lib: Drop now unneeded update_data callsRichard Purdie2017-02-151-3/+0
| | | | | | | | | | Now that the datastore works dynamically we don't need the update_data calls so we can just remove them. They're not actually done anything at all for a while. (Bitbake rev: 2300beb50333bb620013b058a7309e7f2042101d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: Add BB_LIMITEDDEPS supportRichard Purdie2017-01-201-0/+1
| | | | | | | | | | | When we're running with bitbake -b, BB_TASKDEPDATA is incorrect and limited. We really need a way to know this from the metadata and this new variable provides this in worker context. This means existing code can stop having to guess. (Bitbake rev: 05763bc886024dcce2ce6b3060fb00abf79a9402) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: Only add universe targets where the task existsRichard Purdie2017-01-201-0/+9
| | | | | | | | | | | | | Currently "bitbake universe -c fetch" will error if every task in the system doesn't have a fetch task. This seems unreasonable so filter the list based upon whether the task exists. This implementation does assume if a task exits for a given provider name, it can run, even if the preferred provider that ends up getting built might be the namespace without the task. This is unlikely to be a real world issue at this point. (Bitbake rev: 438986f4e39974930ee3205ca4c4d620090e57bb) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker.py: new multiconfig '*' syntax supportJuro Bystricky2017-01-191-1/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently you cannot build a target for all the configured multiconfigs without specifying a list. The list can be quite long, requiring to type several lines of text. This enhancement is to support globbing so that you can do this, e.g. instead of: $ bitbake multiconfig:A:bash multiconfig:B:bash bash you can do: $ bitbake multiconfig:*:bash There are real world use cases where it is desirable to use multiconfig with two different tasks. For example: SDKs with multiple toolchains but also containing set of additional host tools, or multiconfig builds requiring one image for the main CPU(s) and a different co-image for a companion CPU. For this reason, two variations of the new syntax are supported. For example, the following: $ bitbake multiconfig:*:meta-toolhchain would expand to: $ bitbake multiconfig:A:meta-toolchain multiconfig:B:meta-toolchain meta-toolchain However the following: $ bitbake multiconfig:*:meta-toolhchain hosttools would expand to: $ bitbake multiconfig:A:meta-toolchain multiconfig:B:meta-toolchain hosttools In other words, if the user specified the "default" task explicitly, it replaces the implicit "default" task. [YOCTO#10680] (Bitbake rev: 1559ad1fc3ae8b1e4e75b210f598b90be192571b) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: bb/cooker: BBCooker stops notifier at shutdownAníbal Limón2017-01-061-0/+2
| | | | | | | | | | | | | At end of BBCooker needs to release fd's associated with pyinotify watchers to avoid: Too many open files (EMFILE) error in different scenarios like several instances of tinfoil. [YOCTO #10873] (Bitbake rev: ae6045b84978940c365c95c33d6996359c3e299d) Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker/command: Drop expanded_dataRichard Purdie2016-12-161-14/+12
| | | | | | | | | | | | | | | Some of our metadata assumes that BuildStarted and BuildCompleted events see the same data store. This is the case for buildTarget but not for buildFile and recent changes mean this is now a problem. The update_data() call is now an empty operation and there is no difference between the expanded_data and data so we can simply remove the expanded_data and its references and use data everywhere. This has been inteded for a while but the above issue makes this more pressing to finally clean up. (Bitbake rev: e3694e738e98f26f413ada6860ca7d829d3662f0) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: runqueue: enable setVariable command to affect task executionPaul Eggleton2016-12-141-0/+1
| | | | | | | | | | | | Allow the client to set variables with the setVariable command and have those changes take effect when running tasks. This is accomplished by collecting changes made by setVariable separately and pass these to the worker so it can be applied on top of the datastore it creates. (Bitbake rev: 69a3cd790da35c3898a8f50c284ad1a4677682a4) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: allow buildFile warning to be hidden programmaticallyPaul Eggleton2016-12-141-4/+5
| | | | | | | | | | If we want to use this function/command internally, we don't want this warning shown. (Bitbake rev: 5cfbb60833e7b12d698c1c2970c17ccf2a4971bf) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: tinfoil: rewrite as a wrapper around the UIPaul Eggleton2016-12-141-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rewrite tinfoil as a wrapper around the UI, instead of the earlier approach of starting up just enough of cooker to do what we want. This has several advantages: * It now works when bitbake is memory-resident instead of failing with "ERROR: Only one copy of bitbake should be run against a build directory". * We can now connect an actual UI, thus you get things like the recipe parsing / cache loading progress bar and parse error handling for free * We can now handle events generated by the server if we wish to do so * We can potentially extend this to do more stuff, e.g. actually running build operations - this needs to be made more practical before we can use it though (since you effectively have to become the UI yourself for this at the moment.) The downside is that tinfoil no longer has direct access to cooker, the global datastore, or the cache. To mitigate this I have extended data_smart to provide remote access capability for the datastore, and created "fake" cooker and cooker.recipecache / cooker.collection adapter objects in order to avoid breaking too many tinfoil-using scripts that might be out there (we've never officially documented tinfoil or BitBake's internal code, but we can still make accommodations where practical). I've at least gone far enough to support all of the utilities that use tinfoil in OE-Core with some changes, but I know there are scripts such as Chris Larson's "bb" out there that do make other calls into BitBake code that I'm not currently providing access to through the adapters. Part of the fix for [YOCTO #5470]. (Bitbake rev: 3bbf8d611c859f74d563778115677a04f5c4ab43) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: command: provide a means to shut down from the client in memres modePaul Eggleton2016-12-141-0/+7
| | | | | | | | | | In memory resident mode we don't really want to actually shut down since it's only the client going away. (Bitbake rev: 74db369c46043116359101cab70486afd82372c0) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: Handle inofity queue overflows more gracefullyRichard Purdie2016-12-081-0/+8
| | | | | | | | | | | If many files change and the inotify queue overflows, rather than print a traceback, invalidate the caches and warn the user. [YOCTO #10676] (Bitbake rev: 058f8517c041b80e8b591ad7d34a68281b2d03fc) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: Fix world taskgraph generation issueRichard Purdie2016-12-081-4/+10
| | | | | | | | | | | | | | The processing of the "do_" prefix to tasks is currently inconsistent and has resulted in "bitbake world -g" being broken as task prefixes don't get handled correctly. Make the "do_" task prefix handling consistent through various codepaths. [YOCTO #10651] (Bitbake rev: 3d7186353e804c9410096c408bc337a98c8b33fe) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: convert type which needs to be marshalledSujith H2016-12-071-1/+1
| | | | | | | | | | | | | | We assume that the value taken by variable v can be string, integer or any type which can be marshalled by xmlrpc. This change would help us to convert the non marshallable types to string. So that we don't get exception from xmlrpc. [YOCTO #10740] (Bitbake rev: efb0e47479b3526bc047112f7200087c5844bba4) Signed-off-by: Sujith H <sujith.h@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: bitbake: remove True option to getVar callsJoshua Lock2016-11-301-21/+21
| | | | | | | | | | | | getVar() now defaults to expanding by default, thus remove the True option from getVar() calls with a regex search and replace. Search made with the following regex: getVar ?\(( ?[^,()]*), True\) (Bitbake rev: 3b45c479de8640f92dd1d9f147b02e1eecfaadc8) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: lib/bb/cooker.py: fix for BBFILE_PATTERN = ""Robert Yang2016-11-041-0/+4
| | | | | | | | | | | | | | | | | | | There would be error when BBFILE_PATTERN = None: BBFILE_PATTERN_foo not defined This is the correct behaviour, but when the layer sets BBFILE_PATTERN = "", it would match all the remaining recipes, and cause "No bb files matched BBFILE_PATTERN" warnings for all the layers which behind it. When a layer sets BBFILE_PATTERN = "" (for example, a layer only provides git repos and source tarballs), now it means has no recipes. This is different from BBFILE_PATTERN_IGNORE_EMPTY, the later one means that it *may* not have any recipes. (Bitbake rev: 91c3b34625fac2a0f093a4b46a46e89f813e7972) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: runqueue: Optimise task id string manipulationsRichard Purdie2016-10-091-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Some task id manipulations were suboptimal: * taskfn_fromtid and fn_from_tid were effectively the same function * many calls to split_tid(), then taskfn_fromtid() * taskfn_fromtid() called split_tid() internally This patch adds split_tid_mcfn() to replace split_tid() and returns the "taskfn" variant being used in many places. We update all core calls to the new function and ignore the return values we don't need since the function call overhead of the split_tid wrapper is higher than ignoring a return value. The one remaining standalone use of taskfn_fromtid is replaced with fn_from_tid. I couldn't see any external usage so it was dropped. There is external usage of split_tid so a wrapper remains for it. Combined together these changes should improve some of the runqueue task manipulation performance. (Bitbake rev: 1bf2ef874fbe47f1320007efa0bdeef8d630b8a1) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker/providers: Only add target to world build if task existsRichard Purdie2016-09-221-3/+3
| | | | | | | | | | | A "bitbake world -c unpack" currently breaks as not all tasks have an unpack task. This change allows addition of world targets only if the specified task exists which makes certain commands possible when otherwise you just get errors which can't easily be avoided. (Bitbake rev: ca4f5e6d01b5c8cf315f59bc86194d63c0d3d042) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker.py: add LAYERRECOMMENDS processingJoe Slater2016-09-211-3/+34
| | | | | | | | | | | | | | | | | | | Add recommended layers to collection_depends[] so that dynamic priority assignment will work for both depends and recommends. Recommended layers do not cause an error or warning if they are not in the collection list, but debug messages are output for level 3 and above. explode_dep_versions2 returns a dictionary, so we change the variable deplist to depDict. The dictionary values are lists which are either empty or contain only one version specification. (Bitbake rev: 20cdc3d609f8aea992f97c3db336574d3a549973) Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: check if target contains taskEd Bartosh2016-09-161-1/+2
| | | | | | | | | | | | | | Task name was incorrectly added to the targets that already contained :task suffix and fired with BuildInit event. This caused Toaster to create incorrect Target objects and show them in UI. [YOCTO #10221] (Bitbake rev: b7faf1af3bd3110fba347fbe6e432fc4ee66590a) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: record events on cooker exitEd Bartosh2016-09-081-1/+1
| | | | | | | | | | | | | | | | | | | Bitbake collects all events in special event queue when called with -w option. However, it starts to write events to the eventlog only after BuildStarted event is received. In some cases this event is not received at all, e.g. when bitbake is run with --parse-only command line option. It makes sense to write all collected events when CookerExit event received to make sure all events are written into the eventlog even if BuildStarted event is not fired. [YOCTO #10145] (Bitbake rev: 57912de63fa83550c0ae658eb99b76e9cc91a8d1) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker.py: Catch when stdout doesn't have a file descriptorMariano Lopez2016-09-021-9/+12
| | | | | | | | | | | | | | | | | Currently, there is a check to remove the TOSTOP attribute from a tty to avoid hangs. It assumes that sys.stdout will have a file descriptor and this is not always true, some IO classes will throw exceptions when trying to get its file descriptor. This will add a check for such cases and avoid throwing an exception. [YOCTO #10162] (Bitbake rev: cb4f8f6efa28ef2b13bc738a0118b876baa15b3e) Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: bitbake: Initial multi-config supportRichard Purdie2016-08-181-125/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the notion of supporting multiple configurations within a single build. To enable it, set a line in local.conf like: BBMULTICONFIG = "configA configB configC" This would tell bitbake that before it parses the base configuration, it should load conf/configA.conf and so on for each different configuration. These would contain lines like: MACHINE = "A" or other variables which can be set which can be built in the same build directory (or change TMPDIR not to conflict). One downside I've already discovered is that if we want to inherit this file right at the start of parsing, the only place you can put the configurations is in "cwd", since BBPATH isn't constructed until the layers are parsed and therefore using it as a preconf file isn't possible unless its located there. Execution of these targets takes the form "bitbake multiconfig:configA:core-image-minimal core-image-sato" so similar to our virtclass approach for native/nativesdk/multilib using BBCLASSEXTEND. Implementation wise, the implication is that instead of tasks being uniquely referenced with "recipename/fn:task" it now needs to be "configuration:recipename:task". We already started using "virtual" filenames for recipes when we implemented BBCLASSEXTEND and this patch adds a new prefix to these, "multiconfig:<configname>:" and hence avoid changes to a large part of the codebase thanks to this. databuilder has an internal array of data stores and uses the right one depending on the supplied virtual filename. That trick allows us to use the existing parsing code including the multithreading mostly unchanged as well as most of the cache code. For recipecache, we end up with a dict of these accessed by multiconfig (mc). taskdata and runqueue can only cope with one recipecache so for taskdata, we pass in each recipecache and have it compute the result and end up with an array of taskdatas. We can only have one runqueue so there extensive changes there. This initial implementation has some drawbacks: a) There are no inter-multi-configuration dependencies as yet b) There are no sstate optimisations. This means if the build uses the same object twice in say two different TMPDIRs, it will either load from an existing sstate cache at the start or build it twice. We can then in due course look at ways in which it would only build it once and then reuse it. This will likely need significant changes to the way sstate currently works to make that possible. (Bitbake rev: 5287991691578825c847bac2368e9b51c0ede3f0) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cache: Build datastores from databuilder objectRichard Purdie2016-08-181-12/+11
| | | | | | | | | | | | | | Rather than passing in a datastore to build on top of, use the data builder object in the cache and base the parsed recipe from this. This turns things into proper objects building from one another rather than messy mixes of static and class functions. This sets things up so we can support parsing and building multiple configurations. (Bitbake rev: fef18b445c0cb6b266cd939b9c78d7cbce38663f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cache/cooker: Pass databuilder into bb.cache.Cache()Richard Purdie2016-08-181-1/+2
| | | | | | | | | | | | | Rather that the current mix of static and class methods, refactor so that the cache has the databuilder object internally. This becomes useful for the following patches for multi config support. It effectively completes some of the object oriented work we've been working towards in the bitbake core for a while. (Bitbake rev: 7da062956bf40c1b9ac1aaee222a13f40bba9b19) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cache: Make virtualfn2realfn/realfn2virtual standalone functionsRichard Purdie2016-08-181-5/+5
| | | | | | | | | Needing to access these static methods through a class doesn't make sense. Move these to become module level standalone functions. (Bitbake rev: 6d06e93c6a2204af6d2cf747a4610bd0eeb9f202) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: add BuildInit eventElliot Smith2016-08-111-0/+4
| | | | | | | | | | | | | | | | | | | In situations where a bitbake run fails before the build properly starts and BuildStarted is fired, a UI has no way to get at the targets passed to the build. This makes it difficult for the UI to report on the targets which failed. Fire a BuildInit event before running buildTargets() or buildFile(). This enables a UI to capture targets passed to buildTargets(), even if the build fails (e.g. the targets themselves are invalid). [YOCTO #8440] (Bitbake rev: ac02fda870965bf7d44ff5688eda54d2d11ab9c7) Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: Fix incorrect dot file generationRichard Purdie2016-07-201-1/+1
| | | | | | | | | | In the runqueue cleanup/conversion, "dep" was mistakenly used where "tid" should be leading to incorrect task-depends.dot files and causing general confusion. Fix this, its clearly incorrect looking at the code. (Bitbake rev: 689730dbb068c5ea3593e7b92fe5d5e5c0c3760a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: clean up EvertWriterEd Bartosh2016-06-201-20/+13
| | | | | | | | | | | | | Restructured EventWriter code to make it more readable: - got rid of init_file method as it's called only once - renamed exception variable e -> err - renamed event variable e -> evt - simplified main 'if' structure of send method (Bitbake rev: 31977e7bb98f676197c6cee66f6ab4c12d4dcbde) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: replace EventLogWriteHandler with namedtupleEd Bartosh2016-06-201-45/+41
| | | | | | | | | | | class EventLogWriteHandler is a simple wrapper class with only one class member. Replacing it with namedtuple makes code less nested and more readable. (Bitbake rev: 7c5b6812d32d173df36e7f9fc1d877329e79f994) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: don't remove event fileEd Bartosh2016-06-201-6/+0
| | | | | | | | | | There is no need to remove output file as it gets rewritten by open(self.eventfile, 'w') anyway. (Bitbake rev: 1fc9957837b7038dfb983217a3fcd880f143e3a4) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: encode event objects to base64Ed Bartosh2016-06-201-1/+4
| | | | | | | | | | | | | | | | | | | | pickle converts python objects into the binary form that can't be decoded to text and therefore can't be converted to JSON format. Attempt to convert event objects raises this error: TypeError: b'\x80\x03cbb.runqueue\nrunQueueTaskSkipped\nq\x00)... is not JSON serializable Encoded pickled event objects to base64 to be able to convert data structure to JSON. [YOCTO #9803] (Bitbake rev: f18055237e6084f90f6221442e3ba021dcc59c50) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: move EventLogWriteHandler to the top module levelEd Bartosh2016-06-201-62/+64
| | | | | | | | | | | | | | | | | | | EventLogWriteHandler object was created and used in BBCooker.initConfigurationData. This causes creation of multiple EventLogWriteHandler objects and results in duplicated entries in the output event file as BBCooker.initConfigurationData is called multiple times. Added eventlogfile parameter to EventLogWriteHandler to avoid using global variable DEFAULT_EVENTFILE. Moved EventLogWriteHandler to the module level. Created EventLogWriteHandler object in BBCooker.__init__ to ensure that only one handler object is created. (Bitbake rev: d3ad8eee850ec2df54aa09fae44cc7e69c12f32a) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: bitbake: fix wrong usage of format_excEd Bartosh2016-06-161-1/+1
| | | | | | | | | | | | | | | | | | | | First parameter of traceback.format_exc is a 'limit' - a number of stracktraces to format. Passing exception object to format_exc is incorrect, but it works in Python 2 as this code from traceback module works: while tb is not None and (limit is None or n < limit): Comparing integer counter n with the exception object in Python 2 always results in True. However, in Python 3 it throws exception: TypeError: unorderable types: int() < <Exception type>() As format_exc is used in except block of handling another exception this can cause hard to find and debug bugs. (Bitbake rev: a9509949d7e2adba6e3cd89f97daa19a955855b5) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: taskdata/runqueue: Rewrite without use of ID indirectionRichard Purdie2016-06-151-43/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm not sure what possesed me when I wrote this code originally but its indirection of everyting to use numeric IDs and position dependent lists is horrific. Given the way python internals work, its completely and utterly pointless from performance perspective. It also makes the code hard to understand and debug since any numeric ID has to be translated into something human readable. The hard part is that the IDs are infectous and spread from taskdata into runqueue and even partly into cooker for the dependency graph processing. The only real way to deal with this is to convert everything to use a more sane data structure. This patch: * Uses "<fn>:<taskname>" as the ID for tasks rather than a number * Changes to dict() based structures rather than position dependent lists * Drops the build name, runtime name and filename ID indexes On the most part there shouldn't be user visible changes. Sadly we did leak datastructures to the setscene verify function which has to be rewritten. To handle this, the variable name used to specifiy the version changes from BB_SETSCENE_VERIFY_FUNCTION to BB_SETSCENE_VERIFY_FUNCTION2 allowing multiple versions of bitbake to work with suitably written metadata. Anyone with custom schedulers may also need to change them. I believe the benefits in code readability and easier debugging far outweigh those issues though. It also means we have a saner codebase to add multiconfig support on top of. During development, I did have some of the original code coexisting with the new data stores to allow comparision of the data and check it was working correcty, particuarly for taskdata. I have also compared task-depends.dot files before and after the change. There should be no functionality changes in this patch, its purely a data structure change and that is visible in the patch. (Bitbake rev: 2c88afb60da54e58f555411a7bd7b006b0c29306) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker.py: fix warn() -> warning()Robert Yang2016-06-131-3/+3
| | | | | | | | | | Fixed: DeprecationWarning: The 'warn' method is deprecated, use 'warning' instead (Bitbake rev: a3f464d202dafef4538e66c008cdecb7b8709ed1) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: bitbake: Convert to python 3Richard Purdie2016-06-021-19/+19
| | | | | | | | | Various misc changes to convert bitbake to python3 which don't warrant separation into separate commits. (Bitbake rev: d0f904d407f57998419bd9c305ce53e5eaa36b24) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: bitbake: Drop futures usage since we're python 3Richard Purdie2016-06-021-1/+1
| | | | | | (Bitbake rev: bf25f05ce4db11466e62f134f9a6916f886a93d9) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: Fix parse progress for python3Richard Purdie2016-05-211-1/+1
| | | | | | | | | | | Under python the type conversions can mean there are float values used for triggering the parse progress events which then fails. Add an explict int() conversion to ensure the parse events are generated under python3. (Bitbake rev: 138329c58e92744c56aae3ab70ceeef09613250c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: cooker: Improve taskgraph file handlingRichard Purdie2016-05-191-4/+7
| | | | | | | | Use open() instead of file() and close files when finished with them. (Bitbake rev: 033c5a16ff19781ed793c2d97d285884017a2a4e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: bb.cooker: show limited traceback for parsing ExpansionErrorChristopher Larson2016-05-191-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's useful to see tracebacks for ExpansionErrors, but only if we skip the leading bitbake-internal elements, otherwise we see elements of the expansion process. As one example: Before: ERROR: ExpansionError during parsing /scratch/yocto-new/external-as-needed/poky/meta/recipes-core/glibc/glibc-locale_2.23.bb: Failure expanding variable PV[:=], expression was ${@get_external_libc_version(d)} which triggered exception AttributeError: 'module' object has no attribute 'external' After: ERROR: ExpansionError during parsing /scratch/yocto-new/external-as-needed/poky/meta/recipes-core/glibc/glibc-locale_2.23.bb Traceback (most recent call last): File "PV[:=]", line 1, in <module> File "/scratch/yocto-new/external-as-needed/meta-sourcery/recipes-external/glibc/glibc-external-version.inc", line 3, in get_external_libc_version(d=<bb.data_smart.DataSmart object at 0x7f05d2566950>): sopattern = os.path.join(d.getVar('base_libdir', True), 'libc-*.so') > found_paths = oe.external.find_sysroot_files([sopattern], d) if found_paths: ExpansionError: Failure expanding variable PV[:=], expression was ${@get_external_libc_version(d)} which triggered exception AttributeError: 'module' object has no attribute 'external' (Bitbake rev: 7ff5b9eed82b7f4fd138fc6d746a0b79efbea98a) Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 15:29:54 +0000