summaryrefslogtreecommitdiffstats
path: root/README.hardware
Commit message (Collapse)AuthorAgeFilesLines
* README.hardware: update flashing instructions for MPC8315Ed Bartosh2017-06-091-10/+5
| | | | | | | | | | | | | | | | | Using 1000000 memory address for kernel and a00000 for dtb can cause kernel image to overwrite dtb when uncompressing and u-boot crashing with: ERROR: image is not a fdt - must RESET the board to recover. Updated flashing instructions for the board to use addresses 1000000 and 2000000 to avoid this error. Got rid of resetting loadaddr and ftdaddr u-boot variables. (From meta-yocto rev: 05fc7fc19a9b43cab31ea873e5c38a2737c799cf) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: update MPC8315E-RDB sectionEd Bartosh2017-01-161-0/+69
| | | | | | | | | | | | Added instructions to flash and boot device from USB stick. [YOCTO #8719] (From meta-yocto rev: 69d7d159f07eed1ca71f6530e1a7822146878575) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: minor update to edgerouter sectionMaxin B. John2016-10-281-1/+1
| | | | | | | | | | Trivial fix (From meta-yocto rev: 9e71ba9e5d9ce874770e0c2b5c838ec853d16a5d) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: update Edgerouter sectionEd Bartosh2016-10-151-56/+6
| | | | | | | | | | | | | Updated image creation instructions. Used wic images instead of manually putting rootfs and kernel to SD card. [YOCTO #8719] (From meta-yocto rev: 2b030a6061a33334bec63fce23447cbbe1846c86) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: update Beaglebone sectionEd Bartosh2016-10-151-48/+6
| | | | | | | | | | | | | Updated image creation instructions. Used wic images instead of manually partitioning SD card. [YOCTO #8719] (From meta-yocto rev: aaa23941f228f08573b0e4901e8bf3fd5f1c97e3) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: Update Genericx86 sectionSaul Wold2016-10-111-65/+17
| | | | | | | | | | | | | This section was truly dated, update with newer hardware that is being tested. Update section on creating USB stick images using wic and alternate EFI_PROVIDER information about systemd-boot. (From meta-yocto rev: 4a8f28e2c18211a2cd1b380b0b2c8d175fe1e51a) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: drop mention of binary-only driversPaul Eggleton2015-08-251-3/+1
| | | | | | | | | | | EMGD isn't provided in meta-intel anymore, so there's no point telling people to look there. (From meta-yocto rev: 9b8ec43df1d288d5360fde85413961a4234e6b17) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: clarify NFS requirements for edgerouterPaul Eggleton2015-03-311-4/+7
| | | | | | | | | You don't need NFS/TFTP for a plain USB setup. (From meta-yocto rev: 904facdf56028d63d938e07c459169cbe78ef8fe) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: update beaglebone entry to match KERNEL_IMAGETYPEMaciej Borzecki2014-12-211-4/+4
| | | | | | | | | | | | | | U-boot 2014.07 defaults to using a gzip compressed kernel image (zImage). A proper change upading KERNEL_IMAGETYPE has already been introduced to beaglebone machine config. This patch updates manual steps to creating a SD card image with proper kernel image name. (From meta-yocto rev: f1b4b97415e3bb16b1b9119e8339e0bf454c7335) Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mpc8315e-rdb: add the example about booting from jffs2 rootKevin Hao2014-06-171-0/+16
| | | | | | | | (From meta-yocto rev: 93b86fc3e5abee5b5596579a65546b09d0c5f66a) Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README: add maintainers section for hardware reference boardsBruce Ashfield2014-05-191-0/+7
| | | | | | | | | | | | | | | Kevin Hao has stepped up to take care of issues specific to the meta-yocto-bsp hardware reference boards. I'll also serve as a maintaier, so adding my name as well. To make this clear, let's add it to the README.hardware file that describes the boards. cc: Kevin Hao <kexin.hao@windriver.com> (From meta-yocto rev: 7ea7fdf4a9ad0fcedf9a939e20146342d6ab1c57) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: update with Texas Instruments Beaglebone instructionsDenys Dmytriyenko2014-04-101-0/+78
| | | | | | | | | Replaces outdated Beagleboard instructions with Beaglebone Black (and White). (From meta-yocto rev: 283b51b0149f7e5838bd1c8465451897baf0bf44) Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* edgerouter: clarify diskboot instructionsBruce Ashfield2014-04-091-14/+85
| | | | | | | | | | | | | There was some missing details in how to boot from the edgerouter USB storage. With this update, we have the information required to boot from either the vfat, or ext3 partition. [YOCTO #6113] (From meta-yocto rev: ed2eba333d13cc544648169d06bc47c7e2bbb3f2) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: tweak edgerouter instructionsPaul Eggleton2014-04-041-14/+18
| | | | | | | | | | * You need a rollover cable for the serial port * Some minor grammar / typo / formatting fixes (From meta-yocto rev: 79f01604e672ce0eb7af787c27ec561063222796) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: drop routerstationpro in favour of edgerouterPaul Eggleton2014-04-041-162/+1
| | | | | | | (From meta-yocto rev: c7f9076e49178e0e0160710e4ca645ae2d73152e) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Drop beagleboard, replaced by beagleboneRichard Purdie2014-03-311-91/+0
| | | | | | (From meta-yocto rev: b125761e5e31fc506f7b5b87308850cd573ab1b6) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* poky: add edgerouter information to README.hardwareYang Wei2014-03-311-0/+81
| | | | | | | | | | | Adding the summary, preparation and boot information for the newly introduced edgerouter BSP. (From meta-yocto rev: cc8c7a3c94d2cafe899adc7f8199237d4a72f205) Signed-off-by: Yang Wei <Wei.Yang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: update genericx86 hardware support1.5_M5.rc6Ross Burton2013-10-011-8/+26
| | | | | | | (From meta-yocto rev: ed421124e5f9c13ddca1a29a9a645b79e024d602) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: Replace atom-pc with genericx86Darren Hart2013-08-271-6/+6
| | | | | | | | | | | | | Update README.hardware to reflect the recent replacement of atom-pc with genericx86. (From meta-yocto rev: 632d92087cebb11ff9cb0110f9dae01d04bdd83b) Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Ross Burton <ross.burton@intel.com> Cc: Scott Rifenbark <scott.m.rifenbark@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: Update mpc8315 load addressRichard Purdie2013-04-161-3/+3
| | | | | | | | | | | | The kernel size has grown to a point where the original load address might not work due to memory region overlap. This updates the instructions to use larger memory addresses which avoids the problem. [YOCTO #2430] (From meta-yocto rev: 6b7cd4aa50f91c4ebb8a61c9d7fea616be63f470) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: bring up-to-datePaul Eggleton2013-04-101-22/+29
| | | | | | | | | | | * Fix Yocto Project documentation URL * Indicate physical reference hardware support comes from meta-yocto-bsp * Remove/replace references to Poky where appropriate (From meta-yocto rev: e2d620445993d56008e78a7e8463080315828e4c) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: extend USB-ZIP instructionsPaul Eggleton2012-04-011-10/+32
| | | | | | | | | | | | | | * Note that on some machines booting just stops after the SYSLINUX version banner is displayed * Add an instruction to show how to get the geometry information for the disk * Specify the number of cylinders when running mkdiskimage as it is sometimes unable to detect it automatically * Create the temporary mountpoints before attempting to use them * Add an instruction to unmount the disk before removing it Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware for mpc8315erdb incorrectly specified a null modem serial cableBob Cochran2012-04-011-2/+2
| | | | | | | | | | | | I noticed this while beta testing 1.2. but patch is against master (latest commit: bcd4d14425cadc5bd6296f59f14733e8c39c49dd). Instructions specified a null modem. This isn't the case. A straight serial cable is required. I verified it with my own setup and Freescale's user manual. Signed-off-by: Robert Cochran<yocto@mindchasers.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: declare support for BeagleBoard xM rev BPaul Eggleton2011-11-101-1/+1
| | | | | | The BeagleBoard xM revision B has been tested (by me, if nobody else.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* README.hardware: update atom-pc instructionsPaul Eggleton2011-11-101-17/+9
| | | | | | | | | The -live and -directdisk images have been superseded in the Yocto Project 1.1 release, so update the instructions for atom-pc relating to this change. Also fix a couple of other minor atom-pc related capitalisation. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* README.hardware: update MPC8315E-RDB instructionsPaul Eggleton2011-07-201-14/+41
| | | | | | | | | Update the instructions for setting up the MPC8315E-RDB so that they are clearer, use correct filenames, match the other board instructions more closely, and include a note about dealing with non-default MAC addresses. Additionally, add a note about ordering MPC8315E-RDBA. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* README.hardware: update installation instructions for beagleboardDarren Hart2011-05-251-16/+28
| | | | | | | | | | | | | o Add C4 specific instructions o Replace poky with core o Correct a kernel version typo o Clarify some language to avoid confusion encountered during testing Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Zhao Yi <yi.zhao@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Jeff Osier-mixon <jeffrey.osier-mixon@intel.com> Cc: Koen Kooi <koen@dominion.thruhere.net>
* Rename poky-image-* -> core-image-* and task-poky-* -> task-core-*Richard Purdie2011-04-211-10/+10
| | | | | | (From OE-Core rev: 560b04181d8f51d189b99f01a72f17210dadf7a3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: automate boot process for router station proDarren Hart2011-04-121-0/+22
| | | | | | | | (From OE-Core rev: d192b79721c5ef9137720f08bab5d6b97cb041be) Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: remove u-boot flashing instructions for mpc8315e-rdbPaul Eggleton2011-03-311-26/+3
| | | | | | | | | | | | Upgrading u-boot is apparently not necessary with current board revisions, and these instructions may not work properly anyway (our toolchain seems not to be able to compile u-boot in the way described), and given that they are potentially risky they should be removed. (From OE-Core rev: 52a85e805797bff2ec53b2356da8daf224460e9e) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: add Freescale MPC8315E-RDB; other minor tweaksPaul Eggleton2011-03-251-1/+69
| | | | | | | | | | | | * Add Freescale MPC8315E-RDB instructions (based on Wind River README passed on by Bruce Ashfield) * Add short info paragraph for RouterStation Pro (to match BeagleBoard) * Add example for connecting to RouterStation Pro serial console with picocom (From OE-Core rev: 58d443a2ff300ff290486b2153f8a90a8ca2a89b) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: update for 1.0 releasePaul Eggleton2011-03-181-403/+170
| | | | | | | | | | | | | | * Update to refer to Yocto documentation * Change title as suggested by Scott Rifenbark * List all qemu* machine targets * Remove machines no longer in core layer * Add instructions for routerstationpro (originally based on an email from Mark Hatle) (From OE-Core rev: f8e9b15aa694b0f6d3373c2b6bf8904fdb0c7b86) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: update the beagleboard serial port documentationDarren Hart2011-02-151-4/+12
| | | | | | | | | | | | | Update the README.hardware beagleboard description to account for the use of the OMAP_SERIAL in recent kernel recipes. Add a note documenting how to use the old 8250 based serial devices for older kernels. Correct a type. Correct the boot script name from user.scr to boot.scr. Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Gary Thomas <gary@mlbassoc.com>
* Drop remaining bootcdx86 references, the -live images for qemux86 and ↵Richard Purdie2011-01-241-11/+3
| | | | | | atom-pc replace this Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* README.hardware: add beagleboard documentationDarren Hart2011-01-211-0/+71
| | | | | | | | | | | Document the install and boot process for the Beagleboard xM with provisions for the C4. I need someone with a C4 board to validate the steps. Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Scott Rifenbark <scott.m.rifenbark@intel.com>
* README.hardware: Add Atom PC image flashing documentationDarren Hart2010-12-161-0/+75
| | | | | | | Cover the basics of flashing images to physical media for the Atom PC MACHINE, as well as dealing with BIOSs that can only boot USB media in USB-ZIP mode. Signed-off-by: Darren Hart <dvhart@linux.intel.com>
* Fix broken string with weird characters.Robert Bradford2008-02-291-1/+1
| | | | git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3878 311d38ba-8fff-0310-9ca6-ca027cbcb966
* README.hardware: Add note about Phytec boardRichard Purdie2008-02-221-1/+3
| | | | git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3857 311d38ba-8fff-0310-9ca6-ca027cbcb966
* Add em-x270 instructions.Robert Bradford2008-02-221-2/+11
| | | | git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3854 311d38ba-8fff-0310-9ca6-ca027cbcb966
* README.hardware: Document htcuniversal bootingRichard Purdie2008-02-211-12/+42
| | | | git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3844 311d38ba-8fff-0310-9ca6-ca027cbcb966
* Update instructions for MX31ADS board including NAND details.Robert Bradford2008-02-201-4/+47
| | | | git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3836 311d38ba-8fff-0310-9ca6-ca027cbcb966
* README.hardware: Add mx31lite documentationRichard Purdie2008-02-151-3/+11
| | | | git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3816 311d38ba-8fff-0310-9ca6-ca027cbcb966
* README.hardware: c700 is PXA250Marcin Juszkiewicz2008-02-141-1/+1
| | | | git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3805 311d38ba-8fff-0310-9ca6-ca027cbcb966
* README.hardware: another docbook removedMarcin Juszkiewicz2008-02-141-1/+1
| | | | git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3804 311d38ba-8fff-0310-9ca6-ca027cbcb966
* README.hardware: remove docbook tags from FIC-gta01Marcin Juszkiewicz2008-02-141-1/+1
| | | | git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3803 311d38ba-8fff-0310-9ca6-ca027cbcb966
* Add README.hardwareRichard Purdie2008-02-141-0/+344
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3801 311d38ba-8fff-0310-9ca6-ca027cbcb966
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-05 19:07:42 +0000