summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* rootfs.py: for dpkg/opkg, don't install postinsts if package management is ↵Stefan Agner2018-06-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | present If package management is present opkg/dpkg will bring the original copy of the postinsts scripts with the metadata and will be able to handle postinsts just fine. In fact, it is preferred to let package management handle the postinsts scripts in this case since it will keep the package managers database up-to-date too. The run-postinsts scripts will make sure the package manager gets invoked instead of the scripts directly. Note: Before commit 5aae19959a44 ("rootfs.py: Change logic to unistall packages") rootfs.py did not install /etc/$pm-postinsts too. It is not clear whether that change was intentionally or just a bug. This commit fixes/reverts that aspect of the commit. (From OE-Core rev: 4b571c59e3e6bd8b22a63f547a95757aeba5b638) Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* run-postinsts: for dpkg/opkg, do not rely on /etc/*-postinstsStefan Agner2018-06-182-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Start opkg/dpkg as soon as the respective package managers status file is present, no matter whether /etc/$pm-postinsts exists. This decouples the implicit link between postinsts scripts in /etc and the package manager: Currently the package manager is only started if those scripts are present, although the package manager does not use those scripts at all! Package managers install their own set of postinst scripts. The behavior when using rpm packages stays the same. Note that using the package managers capability to execute postinst scripts is preferred for good reasons: It makes sure that the package managers database reflects that the packages have been completely installed and configured. This change allows to drop installation of the postinsts scripts when package management is present. This will be done in a separate change. Note: Before commit 5aae19959a44 ("rootfs.py: Change logic to unistall packages") rootfs.py did not install /etc/$pm-postinsts when package management is installed! The change caused YOCTO #8235 which lead to the behavior change of run-postinsts in first place. (From OE-Core rev: 1af421fcf05457223bf271f3951599b6c150cdff) Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* opkg: avoid running postinst scripts twice when using systemdStefan Agner2018-06-182-31/+0
| | | | | | | | | | | | | | | | | | | | | | | OpenEmbedded has a built-in mechanism to run postinst scripts offline at build time or, if necessary, on first boot (delayed execution). If the latter is the case and systemd is in use, two services end up doing the same thing: - opkg-configure.service starts "opkg configure" directly. - run-postinsts.service starts "/usr/sbin/run-postinsts" which runs postinst scripts stored in /etc/ipk-postinsts/ or "opkg configure" if package management is installed. Since the run-postinsts.service is also used in cases where no package management is in use, it is the primary means of handling postinsts. Get rid of the opkg-configure.service to avoid duplicate opkg configure execution. (From OE-Core rev: 23dcf7ea3af84721fac126a2b2f0f100f7266368) Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gst-validate: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-182-44/+2
| | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 (From OE-Core rev: c4cdfc0507bba6edbdd361fd61a95eef8c76bb87) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-rtsp-server: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-181-2/+2
| | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 (From OE-Core rev: 62d0d19173532fe4f6e6c3c87774d5c66cab6bfb) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-omx: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-181-2/+2
| | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 (From OE-Core rev: bfabe0672fce7ba9309dd9bc9c77f592777834cc) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-python: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-181-2/+2
| | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 (From OE-Core rev: 8a57c84ca4c66140e35e21b3ed43d29b13990928) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-libav: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-181-2/+2
| | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 (From OE-Core rev: 77fe0eea15730792ece3474828e83b35cbe2a108) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-vaapi: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-181-2/+2
| | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 (From OE-Core rev: 6f8330d0142b5ecd59c189938117937f667ef1ce) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-plugins-ugly: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-181-2/+2
| | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 (From OE-Core rev: 23d2fbc5d525b01f426a64055ff86ddc4f3c0026) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-plugins-bad: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-181-2/+2
| | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 (From OE-Core rev: 12ff23f94b43b190ea4f9392f7ba9592362a9c50) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-plugins-good: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-181-2/+2
| | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 (From OE-Core rev: 308a5be3dcd0373bd09db253c15dc39d39b6e48f) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-plugins-base: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-183-57/+11
| | | | | | | | | | | | | Bugfixes only. Please see: https://gstreamer.freedesktop.org/releases/1.14/#1.14.1 Remove a backport patch and rebase one other patch. (From OE-Core rev: aea86b875ebf9fbc767d231f87bd33aa9ab18efa) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0: upgrade 1.14.0 -> 1.14.1Anuj Mittal2018-06-181-2/+2
| | | | | | | (From OE-Core rev: 82e2deb1eee76c10cf5f2785a8b0198276e0d854) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer: enable ptest supportAnuj Mittal2018-06-183-2/+96
| | | | | | | | | | | Make sure that the tests are packaged and can be executed when ptest is enabled. Also, remove build host specific references from Makefile. (From OE-Core rev: d283b0eb909c78b020794ba78e7ec64c3fbee86f) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/cases/rpm.py: change to use base-passwd-docChen Qi2018-06-181-13/+13
| | | | | | | | | | | | | | | | | The test cases assume that rpm-doc is built out, as it says it its comment. This is not always true. And it sometimes results in following error. | cls.tc.target.copyTo(test_file, dst) | UnboundLocalError: local variable 'test_file' referenced before assignment Change to use base-passwd-doc, as this package is more likely to be built out than rpm-doc. (From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xdg-utils: upgrade to 1.1.3Maxin B. John2018-06-181-2/+2
| | | | | | | | | 1.1.2 -> 1.1.3 (From OE-Core rev: 749253756a376428a4e1d89ba7c441c947a8fde7) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bluez5: upgrade to 5.50Maxin B. John2018-06-182-28/+21
| | | | | | | | | | Refresh the following patch: 0001-Allow-using-obexd-without-systemd-in-the-user-sessio.patch (From OE-Core rev: 4032fd3ae640da8076617403152a30841507db4f) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mc: upgrade to 4.8.21Maxin B. John2018-06-181-2/+2
| | | | | | | | | 4.8.20 -> 4.8.21 (From OE-Core rev: e1d16cd44630a14e91ff792f4e97d788bb0f2740) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* vte: upgrade to 0.52.2Maxin B. John2018-06-181-2/+2
| | | | | | | | | 0.52.0 -> 0.52.2 (From OE-Core rev: 6054ac4d5924bb8ebf4df929f4d689764df5f38f) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gtk+3: upgrade to 3.22.30Maxin B. John2018-06-181-2/+2
| | | | | | | | | 3.22.29 -> 3.22.30 (From OE-Core rev: a9625b7b2e061c5be869040af41944908d4642ca) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gtk-icon-utils-native: upgrade to 3.22.30Maxin B. John2018-06-181-2/+2
| | | | | | | | | 3.22.29 -> 3.22.30 (From OE-Core rev: 08a67f0b4eb07a006c30c7ba9a52fc453739e63e) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cronie: upgrade to 1.5.2Maxin B. John2018-06-181-2/+2
| | | | | | | | | 1.5.1 -> 1.5.2 (From OE-Core rev: ed376ab653dd7c0500184c7527085120b51448a9) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libsoup-2.4: upgrade to 2.62.2Maxin B. John2018-06-181-2/+2
| | | | | | | | | 2.62.0 -> 2.62.2 (From OE-Core rev: a0717d16d89ffc19c5ed5998a3b876fc023eb086) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libinput: upgrade to 1.11.0Maxin B. John2018-06-181-2/+2
| | | | | | | | | 1.9.4 -> 1.11.0 (From OE-Core rev: c17869ee01c423a089dfaef8895bb7ffec6a7d74) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* acpid: upgrade to 2.0.29Maxin B. John2018-06-181-2/+2
| | | | | | | | | 2.0.28 -> 2.0.29 (From OE-Core rev: 6dc9857562b87b690ffa4e4d9ff57a4e5de4b4be) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Only add uninative and checksum if inherited uninative classJeremy Puhlman2018-06-181-2/+3
| | | | | | | | | | The checksum value is only calculated if the uninative class is inherited, so check for inherit before adding it to local.conf (From OE-Core rev: 3b5b832589d943700b273e3a4d83561be0c47f36) Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove libdir specification from xorgproto .pc filesJeremy Puhlman2018-06-182-0/+470
| | | | | | | (From OE-Core rev: 8b8eaac3ec9e6f12d78a0be5fa6300c4e58294b7) Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqemu-extract-sdk: fix whitespace errorsDennis Menschel2018-06-181-7/+7
| | | | | | | | | | Indentation using a mix of whitespaces and tabs has been unified in favor of tabs. (From OE-Core rev: 3827f1aa4a2bb433e445802c48e32f72932950e6) Signed-off-by: Dennis Menschel <menschel-d@posteo.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqemu-extract-sdk: support tar.xz formatDennis Menschel2018-06-181-1/+4
| | | | | | | | | | | As the format "tar.xz" is included in the IMAGE_TYPES bitbake variable as defined in meta/classes/image_types.bbclass, it should also be possible to extract a rootfs that has been built using that format. (From OE-Core rev: f813ca7b085c7ddf76a34932e2b3f5bc3372b239) Signed-off-by: Dennis Menschel <menschel-d@posteo.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* default-versions.inc: use weak assignments to allow overwriteStefan Stanacar2018-06-181-3/+3
| | | | | | | | | | | default-versions.inc is included by defaultsetup.conf which in bitbake.conf is included after local/machine/distro.conf. If these are hard assignments distros can's overwrite them. (From OE-Core rev: b9fb89fb7189e631b615868d567e1eab504ee3c2) Signed-off-by: Stefan Stanacar <sstncr@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Multilibize the UPDATERCPN variableJeremy Puhlman2018-06-181-0/+1
| | | | | | | | | | | | | | | | | The audit package specifies the following: UPDATERCPN = "auditd" However because it is not multilibized, the value "auditd" is used to search for the package to add the post install script too. In the mutlilib alternate abi case, that package does not exist. It ends up assigning the post install script to the lib32-audit-lic package, which subsequently failes to execute the script due to the initscript it is trying to turn on is not installed. (From OE-Core rev: ce99653e1af50d9e8f070ca6ae810908c4c138c6) Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meson: only use lists of commands in cross file if requiredRoss Burton2018-06-181-12/+13
| | | | | | | | | | | | | | | | There's a bug in Meson[1] where it find_program("foo") will fail if foo is defined in the cross file as a list. This is causing the Meson build of libdrm to fail, but for this instance we can work around the problem by only using lists in the cross file if there are arguments, and just using a string if there are not. [1] https://github.com/mesonbuild/meson/issues/3737 (From OE-Core rev: 7fd8bc469c2caacc1c2021bd0aa83dd6da7fe1e7) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dnf: default to disable systemd unitsChen Qi2018-06-181-0/+1
| | | | | | | | | | | | | | | | | The services and timers are not useful if a repo is not configured. In OE, we default to have no repo configured. So we default to disable these units. The problem was found by the test_systemd_failed runtime test case. dnf-makecache.service is found to fail. This is due to lack of repo. Note that as this service is started by the dnf-makecache.timer, it's possible that test_systemd_failed passes in case the timer is not started yet. (From OE-Core rev: c017f5528d1ae6316c9434ffd8702665bfe069f9) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/cases/parselogs.py: ignore a message from watchdogChen Qi2018-06-181-0/+1
| | | | | | | | | | | | | | | | | The following message from watchdog is not an error. "error retry time-out = 60 seconds" Checking watchdog's source codes, we have: src/watchdog.c: log_message(LOG_INFO, "error retry time-out = %d seconds", retry_timeout); It's clear this is an info message, so parselogs should ignore it. (From OE-Core rev: c90dff78310ab1517555c4df39b3e2d2f59ff06d) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* watchdog: fix init script for sysvinitChen Qi2018-06-183-59/+113
| | | | | | | | | | | | | | | The current init script is installed from source with redhat style. It does not get configuration from /etc/default/watchdog. We should use debian style init script. Write our own script just like what wd_keepalive does. Also, in the init script, we check the existence of /dev/watchdog to determine whether to start the daemon or not. (From OE-Core rev: a31f8dd34e8ea34dfb087ed464575aa390ece09b) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* watchdog: make init script start after syslogChen Qi2018-06-181-2/+2
| | | | | | | | | | | | | | We need to make sure logs are not lost. As long as there's no strong and vaild reason, we should make daemons start after syslog. As a side effect, we could check the logs to see if there are some potential problem. In OE, the 'parselogs' test case could do it automatically. (From OE-Core rev: 41e4d728ef92586e2714fa0c136b838c3fda051e) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* watchdog: disable systemd services by defaultChen Qi2018-06-181-0/+3
| | | | | | | | | | | | | systemd has internal support for watchdog. See the RuntimeWatchdogSec in /etc/systemd/system.conf. We'd better just disable this service by default. If users want to use watchdog, consider using the systemd one. (From OE-Core rev: 183c9125e78ae1035894600a66b4ea1fa6a3a532) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* watchdog: remove the useless watchdog-conf.patchChen Qi2018-06-182-17/+0
| | | | | | | | | | | | This patch modifies watchdog.conf file. But this file is deliberately deleted in do_install. The current mechanism in OE is to use another recipe watchdog-conf to handle watchdog configuration. So the patch is really useless. (From OE-Core rev: 80638247143b15a5643f9fcc116d7bc7dcbf3496) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/cases/parselogs.py: extend common_errors listChen Qi2018-06-181-0/+1
| | | | | | | | | | | | | | Add the following line to common_errors list. Failed to read /var/lib/nfs/statd/state: Success This message is not harmful, it does not result in rpc.statd starting failure. (From OE-Core rev: 0f2c39149941d95fa979ec675f9dc25655886e2c) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssh: add nativesdk supportMikko Rapeli2018-06-181-2/+4
| | | | | | | | | | And use bitbake variables for install paths to fix nativesdk-openssh compilation. (From OE-Core rev: 70470dfa88338cae06670195bb7009cb13098ac2) Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_ext.bbclass: fix corebase identificationDamien Riegel2018-06-182-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | When generating the extended SDK, there is a copy step where this class goes through the layers and other stuff that have been copied to generate the SDK. The corebase; ie. the folder that contains the core layer 'meta' is treated in a special way. Unfortunately in our tree, we have: sources/meta/meta | `- core layer `------- corebase In populate_sdk_ext's copy_buildsystem, the heuristic to determine which element of the list returned by copy_bitbake_and_layers is corebase is fooled by such layout. In copy_bitbake_and_layers, corebase is already handled specifically and reliably, so we should let that function tell us which folder is corebase instead of trying to determine it. To do so, change the return type of copy_bitbake_and_layers to a tuple that contains (corebase, copied_layers). It also simplifies the code on the caller side. (From OE-Core rev: 5368bc5d0d3606198b93e877bcafcd77bb5f4fd1) Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rsync: merge rsync.inc into the rsync recipeAndre McCurdy2018-06-182-25/+23
| | | | | | | | | | There's only one user of rsync.inc (meta-gplv2 has its own copy), so merge the .inc file into the rsync recipe. (From OE-Core rev: 4e42ad44f1df510a527d199b6ec41541f8939654) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sqlite3: Merge/simplify CFLAGSRichard Purdie2018-06-181-6/+2
| | | | | | | | | | | An earlier version of a change was merged from S. Lockwood-Childs <sjl@vctlabs.com> which made the CFLAGS consistent across native, nativesdk and target cases. This syncs with a later verison of the patch to remove duplicate CFLAGS settings and simplify the recipe. (From OE-Core rev: 604777acfc54d285f315b622bd147ed02d55d6fd) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-fitimage: Add DTBO support for configurationsAlex Kiernan2018-06-181-10/+32
| | | | | | | | | | | When generating overlay DTB configuration sections, U-Boot doesn't want the kernel specified again as we already have that in our base DTB. Add support for this to allow bootm to process overlay configuration sections. (From OE-Core rev: c0db9776beb4f519079a554a733353c368739dcf) Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-fitimage: Allow setting of DTB/DTBO relocation addressAlex Kiernan2018-06-181-0/+10
| | | | | | | | | | | Introduce UBOOT_DTB_LOADADDRESS and UBOOT_DTBO_LOADADDRESS so that you can set where U-Boot loads full and overlay DTBs. This is required when using bootm's overlay support to construct the final DTB. (From OE-Core rev: 05d2230db1d7379494814407fc0d79d7e755d89e) Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc-8: Fix spurious mcpu/march conflict for xscaleKhem Raj2018-06-182-0/+62
| | | | | | | (From OE-Core rev: 00808545041750698f710ef4e0345c80221373b8) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc8: drop stray uClibc specific patchAndre McCurdy2018-06-182-29/+0
| | | | | | | | | | | | The patch was previously removed for gcc7 but came back with gcc8. http://git.openembedded.org/openembedded-core/commit/?id=f71bc69e5b7581c53071055b694bb0dbfe4b4a87 (From OE-Core rev: 5f1b9128bd8693b2309c07cfc2de7b8f77c34da1) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* site.conf.sample: document oe-git-proxy required tools for HOSTTOOLSLeonardo Sandoval2018-06-151-1/+3
| | | | | | | | | | | The script oe-git-proxy uses some tools that may not be included on HOSTTOOLS, thus add the proper documentation. (From meta-yocto rev: 737702c175691db679d513a05b1800a14da35c74) Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake: runqueue.py: Initial implementation of per task process limitsMark Hatle2018-06-151-0/+21
| | | | | | | | | | | | | | | | | | | On high core machines, in do_fetch, it is possible to DDoS your own machine. A method to limit any arbitrary task type to a certain number of simultaneous threads is needed. (Similar to how BB_NUMBER_THREADS works in the general case.) The format of this new limitation is: do_fetch[number_threads] = "2" This should be set globally. If it is set in individual recipes it could result in unpredictable behavior. Note: a value for number_threads > BB_NUMBER_THREADS will have no effect. (Bitbake rev: 055865047c63b9c3b213b47a1884924ce0adeda0) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>