| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change calls to bbfatal() to either die() or bbfatal_log() where we know
we want the full log to be printed by the UI (calling bberror or bbfatal
would otherwise suppress it since the change to connect these functions
through to the UI.) bbfatal() is still fine to use where there is enough
context information in the message such that the log isn't needed.
(From OE-Core rev: 04ed9a19e1b08003329138b8ab83691d13c11fd9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The recent change to connect through the shell logging functions caused
a regression - bb.error() and bb.fatal() cause a flag to be set
internally such that BitBake's UI will not print the full task log on
failure; unfortunately we have in a lot of places called die() or
bbfatal() within shell functions with a very terse message as a means of
exiting out, where we still want to see the full log (and we were
previously). We do still want to have fatal errors with proper messages
that don't result in the full log being printed, however we can't ignore
the typical usage of die(). Having added a mechanism to BitBake to log an
error and reset the flag, create a bbfatal_log() function that uses this
and call it from die() to restore the previous behaviour.
(From OE-Core rev: beec1cf3d22d7dbe85f332a055c72649f4bd3e92)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
Since these functions now log through BitBake's message logging system
we must have standalone implementations here.
(From OE-Core rev: dd7449114a33c92a2877b1a6f875d812b10856ff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
guile_cross_config() was using relative paths which mean it depends on exactly
what directory it starts in. To clarify the code, always use absolute paths.
(From OE-Core rev: 7b064a9dc1dc8c30c7b9982e263a754a144c0a99)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
obey_variables() was using relative paths which mean it depends on exactly what
directory it starts in. To clarify the code, always use absolute paths.
(From OE-Core rev: 74b1757e080d14188fe9f77f6e07ed83b696a2c8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
The calls to sed use relative paths so they depend on the directory the task
starts in. To clarify the code, use absolute paths.
(From OE-Core rev: b61c56ade298726f0b861c5189cb9d5fd6260a36)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
This recipe doesn't unpack any source, so set S to ${WORKDIR}.
(From OE-Core rev: b82d60aa19ecbe1e4fed6a1ce7077b3d6c620ef4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
This recipe doesn't unpack any source, so set S to ${WORKDIR}.
(From OE-Core rev: 43272fffd75ff22526c07883cb688eb146082590)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
This recipe doesn't unpack any source, so set S to ${WORKDIR}.
(From OE-Core rev: 4d42cfb02a7303c92770bc4817591cca595eab1f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
This recipe doesn't unpack any source, so set S to ${WORKDIR}.
(From OE-Core rev: 188a08884d0c1b57d5c8c23f93463399526b19a2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Force gcc's traditional handling of inline to avoid issues with gcc 5.
Upstream gnupg has a more specific fix, however it was made after
gnupg was relicensed to GPLv3 so may be unsafe to backport directly.
http://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=commitdiff;h=5093bed27580e608de073bcc5953bd76b6b8b2de
(From OE-Core rev: c9883a572eb92e9b846e9021495e0715fb2a4db7)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If there is a CGI that provides a continuous stream of data,
If lighttpd client reads slower then the CGI is pushing the data,
then lighttpd's buffers will grow until the (embedded) machine OOMs.
Ref: http://redmine.lighttpd.net/issues/1264
(From OE-Core rev: 6d098587415be098913a3b551b0b7ee8c0270274)
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
| |
(From OE-Core rev: a79afafd422a9b8e74c0eaac6296e6d1802bb994)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Several of the kernel class tasks were making assumptions about what directory
they were executed in. Clarify the code by making paths absolute or passing -C
to oe_runmake.
(From OE-Core rev: d596286bc4cf19774447b136a27acf3c61aad2ff)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently if exec_func() isn't told what directories to create and change to, it
uses B. This is not obvious and may be changed in the future.
Instead, pass -C<dir> to oe_runmake.
(From OE-Core rev: c4a1989f3550e81f188b5789af2c4c18560c3656)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
py_package_preprocess() was using relative paths which mean it depends on
exactly what directory it starts in. To clarify the code, always use absolute
paths.
(From OE-Core rev: d9941a2d9b423af2ca3313e8c1357ccfcc9a96a5)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
The boostconfig task expects to run in ${S} so make that explicit.
(From OE-Core rev: bb458d6c085e4c3d9d4ee8b1fba23600e2d7376b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
The ptest configure/compile/install tasks mirror the base
configure/compile/install tasks, so add an explicit dirs flag to ensure they
mkdir() and chdir() the right directory.
(From OE-Core rev: 2b407176091c5a8697260c79f7559c933f38c317)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On 2.0 versions of git, the create-pull-request script exits with the
warning "No match for commit... Are you sure you pushed 'HEAD' there?".
This is due to a change in behavior where git used to guess the branch
you meant, but no longer does. See the thread at
http://www.spinics.net/lists/git/msg233050.html for more information.
To accommodate the new behavior, if the COMMIT_ID is set to the default
of "HEAD", make it point explicitly to $BRANCH instead.
(From OE-Core rev: 7ee64ea60ede5477b2f9a355d93bdc556e6b7895)
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
musl does not have the GNU regex API provided by glibc.
http://wiki.musl-libc.org/wiki/Functional_differences_from_glibc#Regular_expressions
(From OE-Core rev: 1bf295c85d72b7f6ac394e2c27e66ff507689314)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Execute `bitbake valgrind && bitbake systemd -c cleansstate && bitbake
systemd -c configure && bitbake valgrind -c cleansstate && bitbake systemd
-c compile', and we would get the following error.
src/libsystemd/sd-bus/bus-control.c: fatal error: valgrind/memcheck.h: No such file or directory.
Add PACKAGECONFIG option to sovle this problem.
(From OE-Core rev: e35ee4e016fbd659c88444ab7ee8e86008984f2c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
71158fa1a623125[fix floating dependence on freeglut] is incomplete,
so continue by removing glut.h header file when not enable freeglut
(From OE-Core rev: e53d09e265a217928e1436208e0f9057aa8ef7ae)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
systemd's early boot wants to run the vconsole setup units. They were split out
so that systems without visible consoles don't need the overhead of packaging
kbd etc, but we should pull them in by default.
(From OE-Core rev: a2e7a94f8d777d1cd9a07e1543b88a0cf1f9cd67)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
| |
(From OE-Core rev: 47889cb154bdfa75b2ccccf5e27c8b84c588d61b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current warning is:
WARNING: glibc: unable to generate header for spray.x
Which is easier to debug than:
WARNING: unable to generate header for spray.x
And remove the file before generate it again to fix the warning when
recompile:
file `bootparam_prot.h' already exists and may be overwritten
WARNING: unable to generate header for bootparam_prot.x
file `nlm_prot.h' already exists and may be overwritten
WARNING: unable to generate header for nlm_prot.x
[snip]
(From OE-Core rev: 5ae6d368a89d5f7f3c860f80aa8afb689053afd4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
| |
(From OE-Core rev: b4be1b3cec07c0ec167959994e9250dcca20c273)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
| |
(From OE-Core rev: 87b2874ff9faf935226fc42b4c9ff68d0fcdd439)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* commit a5ebdb6ad8e4f94ac819275d55575230e057e4ae
Author: Valentin Popa <valentin.popa@intel.com>
Date: Tue Feb 18 13:32:16 2014 +0200
Subject: mesa: upgrade to 9.2.5
introduced this do_install_append, but doesn't explain why it doesn't
respect MESA_EGL_NO_X11_HEADERS flag anymore.
Not respecting MESA_EGL_NO_X11_HEADERS breaks any build which is using
qtdeclarative+egl in distribution which has x11 in mesa PACKAGECONFIG
(e.g. my bitbake world builds).
The problem is that qtdeclarative is using "None" symbol in
QSGTexture::Filtering enum, it's possible to rename it in qtdeclarative,
but it's quite invasive and changes qtdeclarative public APIs, see:
https://github.com/webOS-ports/meta-webos-ports/commit/31aa85787a7513e279165a25f6f06ea72c576314
so it was rejected by upstream and I don't want to maintain it in
meta-qt5 - changing public API in OE build is even worse than if upstream
does it.
* This change returns MESA_EGL_NO_X11_HEADERS flag so it's relatively
easy to resolve this conflict in such setups by preventing Xlib.h
inclusion.
(From OE-Core rev: 9c746017af381884cc20c7cd563fc429c2c66112)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
do_patch is currently doing checks with machine_srcrev without initiate
it which leads to below (additional debug added):
DEBUG: Executing shell function do_patch
.
.
.
+ [ 0 -ne 0 ]
+ [ != AUTOINC ]
+ git rev-parse --verify ~0
fatal: Needed a single revision
+ git merge-base HEAD
usage: git merge-base [-a|--all] <commit> <commit>...
or: git merge-base [-a|--all] --octopus <commit>...
or: git merge-base --independent <commit>...
or: git merge-base --is-ancestor <commit> <commit>
or: git merge-base --fork-point <ref> [<commit>]
-a, --all output all common ancestors
--octopus find ancestors for a single n-way merge
--independent list revs not reachable from others
--is-ancestor is the first one ancestor of the other?
--fork-point find where <commit> forked from reflog of <ref>
+ [ = ]
+ set +x
DEBUG: Shell function do_patch finished
Only reason it works today is because 'rev-parse/merge-base' with empty machine_srcrev
will result in "false positive". Solve this by adding a similar non-empty check and
use SRCREV as fallback as in 'do_kernel_metadata'
(From OE-Core rev: 5f7403151fc8bfd5b1d77f6626717c8b84d33d93)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Platforms which have the capability of using the MMC as an
installer medium will present the same MMC device as an
installation candidate. This happens because the MMC
devices appear as mmcblk<X> and the current script strips
up the <X> which is needed to identify an MMC device
uniqely.
This patch now updates the way device identifier stripping
is done and handles the exclusion of installer device from
installation candidates more generically.
(From OE-Core rev: 80ec9f62791575de4948d7635dc6674abfac2193)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Makefile.in.in provided by gettext-minimal-native will be copied
to many packages that need gettext to produce multi-lingual messages.
Replace mkdir_p with MKDIR_P to fix below errors from those packages'
install logs:
/bin/sh: 6: @mkdir_p@: not found
/usr/bin/install: cannot create regular file 'xxx'
As automake manual:
From Automake 1.8 to 1.9.6 AM_PROG_MKDIR_P used to define the output
variable mkdir_p to one of mkdir -p, install-sh -d, or mkinstalldirs.
Nowadays Autoconf provides a similar functionality with AC_PROG_MKDIR_P,
it will set output variable MKDIR_P.
Automake manual advises to switch ASAP to the more modern Autoconf-provided
interface instead; both the macro and the variable have been removed from
Automake 1.12.1 and later releases.
Signe-off-by: Wenzong Fan <wenzong.fan@windriver.com>
(From OE-Core rev: f374ed441627ac833aab62c1189a16ea26a4933b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
This is because S = "${STAGING_KERNEL_DIR}".
(From OE-Core rev: 7c92e64834af8f578b5cfc3cfe33c13bb8a89754)
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some source archive are not standard format.
For example, sometimes, we still need decompress file once again after base_do_unpack,
in such case, the following warning will be caught.
WARNING: xxx : the directory ${WORKDIR}/xxxx (xxxxxx) pointed to by the S variable doesn't exist \
- please set S within the recipe to point to where the source has been unpacked to
So, we should do this QA check after all of unpack jobs been completed.
(From OE-Core rev: 81216da9fa90dc8a67a0f367742b1e73afec0aa1)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
Fix timer calculation error in the lttng-tools/lttng-ust
(From OE-Core rev: 780a590cf2f0604435c05445d02c342e3387497f)
Signed-off-by: Jianchuan Wang <jianchuan.wang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
| |
(From OE-Core rev: 88d60e70da0890184922056cef1f20171f716ace)
Signed-off-by: Steffen Pankratz <steffen.pankratz@elektrobit.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The build path is included in expect-dev rpm package. It should not set
the STAGING_INCDIR statically. The includedir will be replaced with
appropriate value in different stage.
(From OE-Core rev: 41f74d0a05cec275243271e8e6b4dceb16e4daa4)
Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Adwaita is the current GNOME icon theme.
(From OE-Core rev: d4917c0ab8b022b1e28ef32d7b3a46f9bfffa690)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Adwaita is the current GNOME icon theme.
(From OE-Core rev: 94a69019f901073731ed80285624580976d27ddc)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Sato practically requires server side decorations as matchbox panel
draws on top of the title bar. Setting "GTK_CSD=0" informs GTK+3
that we really want server side decorations even for apps designed
for CSD.
(From OE-Core rev: f7b0021d0a7ca33302d993e5d207698327ca5ac7)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Drop --disable-gtk2-dependency and the patch for
gtk/native/Makefile.am: gtk-update-icon-cache is no longer used at
build time and as a result the option was removed.
* Add dependency to libepoxy
* Add dependency to virtual/mesa for wayland-egl
* Package new binaries gtk3-icon-browser and gtk-encode-symbolic-svg
* Add a backported patch that allows server side window decorations
in all cases
* RRECOMMEND adwaita-icon-theme-symbolic: GTK+ widgets expect a
symbolic theme to be installed
(From OE-Core rev: 8d34b4db648756d3474c809d2895b15299fc8a6a)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adwaita is a complete icon theme for GTK+, and the current GNOME icon
theme. Most importantly it includes the symbolic icons used extensively
in GTK+3 widgets.
* Package icons, large icons, symbolic icons and cursors separately
* Backport a build fix for the cursor theme to cut installed size by
11MB.
(From OE-Core rev: 66c81b204fe9041db13918ced505f3e930cae978)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This option causes combo-layer to do git fetch and hard reset instead of
git pull in the component repositories. This makes sure that the local
component repositories are always in sync with the remote - tolerating
force pushes and overriding any locally made changes.
(From OE-Core rev: c908a423f85a84ddd8249abd00254f29d47df74b)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Only allow fast-forward merges in the component repositories when doing
git-pull. This makes it possible to spot problems (i.e. rewriting of
history) in the component upstream . Also, this change prevents the
creation of local-only merge commits in the component repositories.
These merges cause "last_revision" field of the combo-layer config to
point to a git commit that is only present in the users local component
repository but nowhere in upstream.
(From OE-Core rev: 5207169b9c6c4b05c6b043745905a5498adca1a3)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Disconnect the connection by poll() timeout.
If timeout=0 and apr_wait_for_io_or_timeout()=APR_TIMEUP then
apr_socket_recv() returns EAGAIN.
(From OE-Core rev: cef4de5cd6c12091146dc1ef02cd80e094c6728e)
Signed-off-by: Noriaki Yoshitane <yoshitane.nrs@cnt.ncos.nec.co.jp>
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The python-io package includes ssl.py module which imports the
contextlib library.
This applied to Python 2.7.9 but not 3.3.
(From OE-Core rev: b6b9df15a630605619bff060d5073272685058d6)
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Used mkstemp instead of raw open file call.
Also added the exception message to the output of
the sanity check.
[YOCTO #7922]
(From OE-Core rev: c101201b3aa7378e4c65a879040fe6f509e7cdcd)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
files-in-$pkg.txt
This is just a safe check to make sure the output folder is present, before
creating the files-in-$pkg.txt file.
(From OE-Core rev: d48233cb1fd84f1061a8ba3c15bacc180e93934c)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Skip the warning for dbus-ptest:
dbus-1.8.18: dbus-ptest rdepends on dbus-test-ptest, but it isn't a build dependency? [build-deps]
We add dbus-test to dbus' DEPENDS to fix the problem usually, but
dbus-test DEPENDS on dbus, so we can't do that, use INSANE_SKIP to fix
the problem.
(From OE-Core rev: 7bf27752cdfcb83a951086d6e5609593c79437c3)
(From OE-Core rev: e26e348d7b6301f0e1cb15018ebadfa0eea4013c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is no ac_cv_file__usr_share_sgml_X11_defs_ent in configure, can't
find it in config.log after remove, either.
(From OE-Core rev: 27bd0a27a879cfc31062fbb2b1a04431d5541c55)
(From OE-Core rev: f63f6c9b28c5ffd7f391d7a657b7f43a9782a374)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is no ac_cv_glibc_ver in configure, can't find it
in config.log after remove, either.
(From OE-Core rev: 945e2bf6845b052eeb5101033c4770d766142bb1)
(From OE-Core rev: 3234c79940f67ca48e8ee7961c87d80cc27939e5)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|