summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kerneldev: create kernel-devsrc packagingBruce Ashfield2014-12-211-0/+50
| | | | | | | | | | | | | | | | | | | | | | | kernel-devsrc is responsible for creating and a packaging an environment appropriate for kernel development (on or off target). To create this support, we only need to copy/install the results of the virtual/kernel providers build in the staging dir ... with some minor manipulations to the source tree (.git removal and a clean up). This produces a source tree that is capable of rebuilding the kernel on the target. Installing the kernel-devsrc package on a target (along with a toolchain) is all that remains to be done. $ cd /usr/src/kernel $ make oldconfig $ make -j2 bzImage (From OE-Core rev: 6412dc1df434f774c434ec08bf9b3706edb756f2) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel: fix out of tree module buildsBruce Ashfield2014-12-211-0/+23
| | | | | | | | | | | | | | With the kernel build optimizations, we no longer copy the source from the built kernel into the staging dir, since the kernel is unpacked and built directly from the staging dir. This means that a few build artifacts need to be restored to allow out of tree modules to once again build. (From OE-Core rev: 4b981e4fd5a4744d0d83053219274296e7785e77) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel: Rearrange for 1.8Richard Purdie2014-12-215-98/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 1.8 we want to streamline the kernel build process. Basically we currently have multiple copies of the kernel source floating around and the copying/compression/decompression is painful. Lets assume we have a kernel source per machine since in most cases this is true (and we have a sysroot per machine anyway). Basically, instead of extracting a source into WORKDIR, then copying to a sysroot, we now set S to point straight at STAGING_DIR_KERNEL. Anything using kernel source can then just point at it and use: do_configure[depends] += "virtual/kernel:do_patch" to depend on the kernel source being present. Note this is different behaviour to DEPENDS += "virtual/kernel" which equates to do_configure[depends] += "virtual/kernel:do_populate_sysroot". Once we do this, we no longer need the copy operation in do_populate_sysroot, in fact there is nothing to do there (yay). The remaining part of the challenge is to kill off the horrible do_install. This patch splits it off to a different class, the idea here is to have a separate recipe which depends on the virtual/kernel:do_patch and just installs and packages the source needed to build modules on target into a specific package. Right now this code is proof of concept. It builds kernels and kernel modules. perf blows up in do_package with issues on finding the kernel version which can probably be fixed by adding back the right bit of do_install, and adding a dependency of do_package[depends] += "virtual/kernel:do_install" to perf. The whole thing needs a good write up, the corner cases testing and probably a good dose of cleanup to the remaining code. (From OE-Core rev: 3b3f7e785e27990ba21bc7cd97289c826a9a95d1) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image: Avoid race over directory creationRichard Purdie2014-12-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | There is a race over the do_package_qa task and the do_rootfs task since rootfs recreates a directory. This patch disables the task (which isn't used for images) to avoid the race: NOTE: recipe core-image-minimal-1.0-r0: task do_package_qa: Started NOTE: recipe core-image-minimal-1.0-r0: task do_rootfs: Started ERROR: Build of do_package_qa failed ERROR: Traceback (most recent call last): File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/bitbake/lib/bb/build.py", line 497, in exec_task return _exec_task(fn, task, d, quieterr) File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/bitbake/lib/bb/build.py", line 440, in _exec_task exec_func(func, localdata) File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/bitbake/lib/bb/build.py", line 212, in exec_func exec_func_python(func, d, runfile, cwd=adir) File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/bitbake/lib/bb/build.py", line 237, in exec_func_python os.chdir(cwd) OSError: [Errno 2] No such file or directory: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/build/tmp/work/qemumips-poky-linux/core-image-minimal/1.0-r0/core-image-minimal-1.0' (From OE-Core rev: 0550d112ad9c2ca9f8167dcae35200210923f2c5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dbus-test: Fix SRC_URI checksum to match dbusRichard Purdie2014-12-211-2/+2
| | | | | | | | | | | | If the system fetches dbus first, everything works and the checksum is correct there. If dbus-test fetches first, the checksum is incorrect and wasn't changed with the version upgrade. Fix the checksum. (From OE-Core rev: a5fc201961e62cf5d9088b6d66bb2d50aa84109d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* report-error: Handle the case no logfile existsRichard Purdie2014-12-211-3/+6
| | | | | | | | | If the task fails early, no error log may exist. Currently we crash in that case, this handles the situation more gracefully. (From OE-Core rev: 1e6bfcab47f532677f87683ba2f5e5fb905e9ba5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ref-manual: Update to the BOOT_IMAGE_FILES variable in the glossaryMaciej Borzecki2014-12-191-4/+27
| | | | | | | | | | | | | Update entry for IMAGE_BOOT_FILES with information on glob patterns. (From yocto-docs rev: ad3fc0061e3f4dc3ecc6b0a101685c301c5690e9) Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ref-manual: Updates to some tuning variables in the glossary:Scott Rifenbark2014-12-191-22/+23
| | | | | | | | | | | | | | | | | Fixes [YOCTO #5463] Updated the notes in the TUNE_ASARGS, TUNE_CCARGS, and TUNE_LDARGS to indicate that the BSPs select the tune and then selected tun affects the tun variables themselves. Also combined the TUNE_PKGARCH and the TUNE_PKGARCH_tune variable. We really don't need the TUNE_PKGARCH_tune variable as it is simply the TUNE_PKGARCH variable with the override. (From yocto-docs rev: dabc624272a9bb4cf5e62dee664ba729a9887208) Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Revert "yocto-project-qs, mega-manual: Conformed to YP book set"Scott Rifenbark2014-12-198-38/+19
| | | | | | | | This reverts commit 914c482bd89071ab34b3381e3bd8065f871cc047. I had to revert this change because it broke the footnote behavior. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Revert "yocto-project-qs: Removed redundant code to display title image."Scott Rifenbark2014-12-191-0/+8
| | | | | | This reverts commit 322ae6450dfac9b2054b33334898a078fdd20902. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-project-qs: Removed redundant code to display title image.Scott Rifenbark2014-12-191-8/+0
| | | | | | | | | | | | | | Creation of a PDF version of the YP Quick Start is not supported. The <mediaobject></mediaobject> code appears in the manual for that purpose only. It is ignored during HTML generation. Thus, I have removed it from the file. The image is actually displayed through the <authorgroup> definition, which is located in the CSS stylesheet. (From yocto-docs rev: 322ae6450dfac9b2054b33334898a078fdd20902) Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-project-qs, mega-manual: Conformed to YP book setScott Rifenbark2014-12-198-19/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I discovered some artifacts and inconsistencies with how the YP Quick Start was made. I made the following changes: 1. Changed the structure of the QS from "article" to "book" as it is a separate book. This change doesn't fix anything but it does bring the XML file closer to passing validation. 2. Removed the <abstract></abstract> tag. This tag was in place simply to display the PNG file for the Yocto logo in the upper right part of the first page. After turning the QS into a book from an article, the title could be displayed as a PNG file similar to the other books. This change solved two issues: 1) removed the empty "abstract" element from being displayed in both the mega-manual and the PDF version, and 2), brought the author and look of the first page into line with other YP manuals. 3. Removed the old PNG file used to display the Yocto logo at the top of the QS. This file was removed from both the yocto-project-qs and mega-manual "figures" directories. 4. Added a new "yocto-project-qs-title.png" file to both the yocto-project-qs and mega-manual "figures" directories. 5. Updated the "qs-style.css" file's .authorgroup element to match and behave like the other YP manuals. This effectively correctly displays the title PNG file for the QS. 6. Updated the Makefile area where the TAR files are made for both the yocto-project-qs and the mega-manual. I had to substitute in the new PNG file for the QS one and had to add the title PNG to the mega-manual part. (From yocto-docs rev: 914c482bd89071ab34b3381e3bd8065f871cc047) Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* yocto-project-qs: Updated DocBook type declarationScott Rifenbark2014-12-191-1/+1
| | | | | | | | | | | The DocBook type at the top of the file indicated chapter when the actual block of XML is article. I changed it to article to be consistent. (From yocto-docs rev: 5350426c11abc2fa4b1418a2d215cd8814745ef9) Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* security_flags: Fix typo for cupsRichard Purdie2014-12-191-1/+1
| | | | | | (From OE-Core rev: 146b1ea632294b2830e2cfe2d1258d48cd0c0e85) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox-mdev: Support automatic mounting of block devicesmike.looijmans@topic.nl2014-12-195-0/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upon inserting a USB stick or similar device, mdev will run an automounter script that mounts valid partitions on /media/<device>. The script first checks /etc/fstab entries so that mounting on UUID or LABEL or using custom mount options is still possible. If /etc/fstab does not contain particular mount options, the script will create (and remove) the mountpoint automatically. The script also supports full disk partitions (devices without partition table). The following environments can be set in /etc/default/mdev: MDEV_AUTOMOUNT=n (Disables automounting completely) MDEV_AUTOMOUNT_ROOT=/media (Change the mount root location) Automatic mounting for a particular device can be disabled by creating a file "/dev/<device>.nomount". This is helpful in scripts that create partitions for example, and want to perform specific actions which require the device to remain unmounted. A more complex variation (using LABEL based mounts) on this script has been in use in OpenPLi for many years now, and I've used this one on many projects already, so it's about time to push this to mainline. (From OE-Core rev: 19073fb991b3e2d2304e55f94e30674adf375197) Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox-mdev: Add hotplug kernel module support to mdev.confmike.looijmans@topic.nl2014-12-191-0/+2
| | | | | | | | | | | | | | | | | Add a line to mdev.conf that tells mdev to load kernel modules when required. For example, if you built wifi support as an external module, inserting a wifi stick into a USB port will now automatically load that module into the kernel and the wlan device will be ready for configuration. Without this patch, you have to load required modules manually or force them to load at system startup. (From OE-Core rev: 11420b0566a6a085c6cb78f3f1495ed9c599e6fd) Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox/find-touchscreen.sh: Simplify script and recognize USB devicesmike.looijmans@topic.nl2014-12-191-5/+2
| | | | | | | | | | | | | | | | | Simplify the grep expression, use the more common "grep" command instead of "egrep", avoid forking extra processes, join multiple invokations into a single combined expression. Change the touchscreen regex so that it also recognizes various USB touchscreen controllers and the ad7879 i2c device. Based on code used in OpenPLi and meta-topic. (From OE-Core rev: e82353eb9f76b582122fda27c93339eac5553eb2) Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox-mdev: Install missing find-touchscreen.shmike.looijmans@topic.nl2014-12-191-1/+3
| | | | | | | | | | | | mdev.conf references the find-touchscreen.sh script, but this file was not being installed. Add the script to the busybox-mdev package. (From OE-Core rev: 44f6df0dfac54845ef5c3ab1af5663d1b6c1d64b) Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* powertop: Fix build for !uclibcMartin Jansa2014-12-191-1/+2
| | | | | | | | | | | | | | | | | * EXTRA_LDFLAGS isn't defined for !uclibc and configure fails when it reads it unexpanded, see config.log snippet: configure:4177: checking whether the C compiler works configure:4199: i586-oe-linux-gcc -m32 -march=i586 --sysroot=/OE/sysroots/qemux86 -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed ${EXTRA_LDFLAGS} conftest.c >&5 i586-oe-linux-gcc: error: ${EXTRA_LDFLAGS}: No such file or directory configure:4203: $? = 1 configure:4241: result: no (From OE-Core rev: a3e9b391e1024d6d2e256b75c214d34e6693e332) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* common-licenses: add SMAIL_GPLRoss Burton2014-12-191-0/+164
| | | | | | | | | This is used by debianutils. (From OE-Core rev: 6214649b3aed5075c86aed79aa1356f1e5a19f9d) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wic: add globbing support in IMAGE_BOOT_FILES entriesMaciej Borzecki2014-12-191-9/+32
| | | | | | | | | | | | | | Adding glob support for entries in IMAGE_BOOT_FILES. Files picked up by glob are by default installed under their basename, as this is likely most common use case. Target name for globbed entries specifies the name of directory in which files will be installed withing the partition. (From OE-Core rev: 2c9635bdb97ddc80750c11d356e153a99d61cf09) Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wic: IMAGE_BOOT_FILES format checks in bootimg-partition sourceMaciej Borzecki2014-12-191-0/+2
| | | | | | | | | | | | Check for malformed entries in IMAGE_BOOT_FILES, fail early if such entries were found. (From OE-Core rev: e56072aaaad6cfa222853a4e9e68dd8aa861de18) Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mesa: add PACKAGECONFIG support for gallium XA state trackerNicolas Dechesne2014-12-191-0/+6
| | | | | | | | (From OE-Core rev: d1cf188783ea5ae9013996a208f60960e3e7a6e7) Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* vala: Add Upstream-Status to patchSaul Wold2014-12-191-0/+2
| | | | | | | | (From OE-Core rev: 89bb91520746c229d534cd856051f11d8b328d29) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oprofile: add missing Upstream-StatusRoss Burton2014-12-191-0/+5
| | | | | | | (From OE-Core rev: 77367e78aa6e2edce2a7837c7d28aa74f6ef2d8b) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* which: add missing Upstream-StatusRoss Burton2014-12-191-0/+5
| | | | | | | (From OE-Core rev: c04715d17b357f46bd78f1d9c83e2639b04987dd) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-cache: refactor conditionals and error handlingRichard Tollerton2014-12-191-13/+22
| | | | | | | | | | | | | | | | Most of /etc/init.d/udev-cache is in a conditional block which can be replaced by a `[ ... ] || exit 0` to reduce nesting. This also provides an opportunity to add some additional messages when VERBOSE is set. Capture and report errors encountered in the cache generation process, using set -e and trap EXIT. These errors were previously being ignored. (From OE-Core rev: a1357f3c78e46cd4297fefab56acf87342967132) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-cache: Update cache asynchronouslyRichard Tollerton2014-12-191-9/+11
| | | | | | | | | | | Don't hold up the boot while the cache is being updated. (From OE-Core rev: eb52b257511b7624c8e212f5e9df711935d619ee) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Acked-by: Gratian Crisan <gratian.crisan@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-cache: invalidate on rules.d changesRichard Tollerton2014-12-192-0/+11
| | | | | | | | | | | | | | | Presently, the cache is not regenerated if udev rules are modified, which may cause the cache to preserve an old configuration. To fix, include the size, mtime, and filename of all udev rules in the system configuration. This change requires `stat`. If busybox supplies stat, CONFIG_FEATURE_STAT_FORMAT must be enabled. (From OE-Core rev: 8847e33b12171a21b7c7e1241198080ad9ef9284) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-cache: always warn on console if invalidatedRichard Tollerton2014-12-191-3/+1
| | | | | | | | | | | Failure to use the udev cache is a significant enough impact to the boot time (possibly seconds) that it should always be reported on the console, regardless of the VERBOSE setting. (From OE-Core rev: 9e588bbf9477d57f0a46d92ce11f8f891115496c) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-cache: Clean up message when cache is invalidatedRichard Tollerton2014-12-191-4/+7
| | | | | | | | | | | Replace a bunch of echo's with a single cat<<EOF. Take this opportunity to more clearly communicate what is going on with the cache and what files are being looked at. (From OE-Core rev: d768772a1259d3659d0424c39e65eeb3443af86c) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-cache: refactor sysconf generationRichard Tollerton2014-12-192-5/+18
| | | | | | | | | | | | | | The current system configuration needs to be generated both inside udev (to compare against the cached system configuration) and udev-cache (to regenerate the cached system configuration). Use a single function definition for this task, duplicated across both initscripts. This also allows administrators to modify it for machine-specific requirements. (From OE-Core rev: 34957afcfe663eed4f5ebec0891a84467e67a48d) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-cache: don't generate sysconf twiceRichard Tollerton2014-12-192-2/+7
| | | | | | | | | | | | The udev initscript signals udev-cache to run by generating a new sysconf; but udev-cache now overwrites that with its own copy. To eliminate the needless sysconf generating in udev, we instead trigger udev-cache to run by touching a new file $DEVCACHE_REGEN. (From OE-Core rev: 8d2325be2d03086b7e5a02618edb05b19fbcdc48) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-cache: replace readfiles() with cmpRichard Tollerton2014-12-192-36/+10
| | | | | | | | | | | | | | | | | | | | | Currently, udev-cache system configurations are compared as shell string variables, read into memory with the readfiles() function. This is more complex, and significantly (27-41%) slower, than comparing them using `cmp`. (Performance was verified on both Cortex-A9 and Intel Nehalem systems.) So just use cmp. This requires a few other small changes: exclude /proc/atags from CMP_FILE_LIST if it doesn't exist to avoid errors in `cat` and `cmp`. `cmp -q` doesn't exist in busybox, so instead, redirect output to /dev/null. (From OE-Core rev: e8ea6a29ed3ab9892a3bc7ee8249f10688c0af29) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-cache: stop race between sysconf and cache generationRichard Tollerton2014-12-191-0/+18
| | | | | | | | | | | | | | | | | | | The validity of the udev cache is determined by the sysconf file (/etc/udev/cache.data). Currently, there is a substantial delay between sysconf generation in /etc/init.d/udev and cache generation in /etc/init.d/udev-cache. If a hotplug event arrives in the middle of this, then the sysconf will be out of date with respect to the cache. The solution is two-pronged. First, we minimize the race window by regenerating the sysconf immediately before the cache, in /etc/init.d/udev-cache. This allows us to kill the race entirely by stopping the udev event queue while the sysconf and cache are being generated. (From OE-Core rev: 107e7fa2b2cc2e06addb83518c03b3ab769fed6f) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* buildtools-tarball: restore missing git toolsPaul Eggleton2014-12-192-0/+23
| | | | | | | | | | | | | | | | | | | | | | Since the split out of git-perltools, some git tools (such as "git am", "git send-email" and "git-submodule") have no longer been part of the buildtools. We need these, so add them back in. However, adding git-perltools to buildtools triggers perl itself being brought into buildtools as well, and we don't want that; but we also don't want to have to hack the git recipe or indeed anything else that starts depending on perl. Thus, add a dummy package which gets installed in its place, in a separate package architecture that is only enabled for buildtools to ensure it doesn't start appearing in place of nativesdk-perl anywhere else. Fixes [YOCTO #7033]. (From OE-Core rev: 5b051d65e797624cca3a81fc6f5c924925f3493e) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd-systemctl: add handling of template unit filesTomas Novotny2014-12-191-8/+37
| | | | | | | | | | | | | | | | | | | | | Template unit files (those with '@' in their names) are not handled with native version of systemctl. This is usually not a problem, as the native systemctl fails and systemctl command is executed during first boot. But some early boot template units may fail during first boot because opkg configure for first boot is pulled too late for them (although I encouter it only with some of my services, not with oe-core ones). Handling of template unit files is same as in original systemctl. Also DefaultInstance directive in template is respected. As with original systemctl, enabling of template without instance and DefaultInstance does nothing. (From OE-Core rev: 90904ef3bab182a46174f7bb60e83f0f22a3f209) Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libproxy: let INCOMPATIBLE_LICENSE supports wildcardHongxu Jia2014-12-191-1/+1
| | | | | | | | | | | | While wildcard in INCOMPATIBLE_LICENSE, such as INCOMPATIBLE_LICENSE = "*GPL-3", libproxy could correct work. [YOCTO #5592] (From OE-Core rev: 97f46c97c7f8a39f3691aee423b4192680d114a0) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* default-versions.inc: let INCOMPATIBLE_LICENSE supports wildcardHongxu Jia2014-12-191-1/+1
| | | | | | | | | | | | While wildcard in INCOMPATIBLE_LICENSE, such as INCOMPATIBLE_LICENSE = "*GPL-3", PREFERRED_VERSION_db-native could have the correct value "5.%" [YOCTO #5592] (From OE-Core rev: fddca246f15ff72828a0198d8c4d3e58d8bf4442) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base/license.bbclass: expand wildcards in INCOMPATIBLE_LICENSEHongxu Jia2014-12-193-2/+27
| | | | | | | | | | | | | | | | The whitelist processing in code in base.bbclass does not play well with wildcards in INCOMPATIBLE_LICENSES. The code expects bad_licenses to contain actual license names, not wildcards. Add incompatible_license_contains to replace bb.utils.contains( "INCOMPATIBLE_LICENSE", **, **, **, d) [YOCTO #5592] (From OE-Core rev: 3587653a8d8abc7cfed6a5c6ecfa72bee283e451) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc runtime: specify license on a per package basisJoe Slater2014-12-192-0/+38
| | | | | | | | | | | | | It can be alarming to attempt to exclude GPLv3 from an image but find that libstdc++ and libgcc still show it. We indicate the license for each package to show libraries that really are just GCC-3.0-with-GCC-exception. (From OE-Core rev: 5db535a91edea439c14e75726acd23e64bb1e2ea) Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* toaster.bbclass: trigger event for other image filesAlexandru DAMIAN2014-12-191-3/+15
| | | | | | | | | | | | | | | Toaster will log all the files that it can find in the deploy images directory, and list them, considering that they may be artifacts of the current build not logged anywhere else. [YOCTO #6836] (From OE-Core rev: 87a25b1dec86da809c9a13c10449bd33a471cb95) Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd: backport patch to fix reading journal backwardsJonathan Liu2014-12-192-0/+35
| | | | | | | | (From OE-Core rev: c0650feb6ce7151a22632bab7270002314a1b6be) Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* font-util: Fix incorrect PKG_CONFIG_PATHRichard Tollerton2014-12-191-1/+1
| | | | | | | | | | | | | | | | PKG_CONFIG_PATH always defaults to /usr/lib/pkgconfig, and the host /usr/lib/pkgconfig is always checked as a fallback; however, PKG_CONFIG_PATH is currently (incorrectly) set to /usr/lib/pkg-config in the sysroot, which doesn't exist. On host distros where the font encoding maps are stored under a different path than OE, this will break font builds, because ucs2any will attempt to read the sysroot's encoding maps with the host paths. (From OE-Core rev: 89a29a3ad0742cd713e739d3d460be7711966679) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package.bbclass: do variable fixups even when FILES was setPeter Seebach2014-12-191-8/+10
| | | | | | | | | | | | | | | | | | | A number of settings (DESCRIPTION, SUMMARY, postinst, postrm, and appends to RDEPENDS) were made only if FILES_foo was not set for a given package. If you had a modified glibc packaging setup that was defining FILES_glibc-gconv-somelocale, this would prevent the automatic append of glibc-gconv as a dependency, because extra_depends was ignored. I think the assumption may have been that if FILES_foo was set, DESCRIPTION_foo and SUMMARY_foo would also be set, but it seems to me that the right answer is probably to set them if they aren't already set, and leave them alone if they are. (From OE-Core rev: 7e59b0c7e03fc08a6eaf9c8ccb6bfa72b4604cc5) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel.bbclass: Remove bashismKhem Raj2014-12-191-1/+1
| | | | | | | | | | | | | | | | | Fixes build on systems using dash for default shell e.g. errors like run.do_strip.25842: [[: not found | readelf: Error: Unable to read in 0x37 bytes of section headers | readelf: Error: Not an ELF file - it has the wrong magic bytes at the start Change-Id: I29cac15be44a02d75a3d6889b6ae9b2e19bf46af (From OE-Core rev: 6956ffdc6e9879e32360b6ee3a3d286618807485) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image_types.bbclass: Populate cpio /init as symlinkNathan Rossi2014-12-191-1/+5
| | | | | | | | | | | | | | | | For cpio/ramfs the kernel will first attempt to execute /init and will emit the following error as the file is empty: Failed to execute /init (error -13) If /sbin/init exists symlink to it so the kernel can immediately start the correct init executable instead of an empty file. (From OE-Core rev: 3505558e067fdde4ab7aaaf3c50886f292d7c166) Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* shadow: disable nscd feature when glibc is not built with spawn posix functionsBaptiste DURAND2014-12-191-0/+1
| | | | | | | | | | | | | | | | shadow package configure step fails with this log output : | checking location of faillog/lastlog/wtmp... (cached) /var/log | checking location of the passwd program... (cached) /usr/bin | checking for posix_spawn... no | configure: error: posix_spawn is needed for nscd support | Configure failed. The contents of all config.log files follows to aid debugging | ERROR: oe_runconf failed (From OE-Core rev: 3678e504cf81f45bd0b0ab315f9cc4da87a633b5) Signed-off-by: Baptiste DURAND <baptiste.durand@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gnutls: upgrade to 3.3.11Armin Kuster2014-12-192-7/+6
| | | | | | | | | | | | this also includes a fix for CVE-2014-8564. see http://www.gnutls.org/security.html for CVE-2014-3566 "POODLE" statement. (From OE-Core rev: 60e4c6ca148e736c947477da4ddcb5e7fdfb94f1) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* packagegroup-core-tools-profile: allow lttng-modules for ARMNathan Lynch2014-12-191-1/+0
| | | | | | | | | | | | | Per commit f6587be6cd3dc864143b1c0be0bb8179a61dc835 (lttng-modules: re-enable ARM builds) lttng-modules is fine for ARM now. Without this additional change, tools-profile won't bring in lttng-modules when targeting ARM. (From OE-Core rev: fbf979da6e6b7332dccab38fd66f3c01594f8211) Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-07-05 17:25:52 +0000