1 files changed, 0 insertions, 464 deletions

diff --git a/scripts/contrib/mkefidisk.sh b/scripts/contrib/mkefidisk.sh
deleted file mode 100755
index ac4ec9c7fb..0000000000
--- a/scripts/contrib/mkefidisk.sh
+++ /dev/null
@@ -1,464 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2012, Intel Corporation.
-# All rights reserved.
-#
-# This program is free software;  you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY;  without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program;  if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-
-LANG=C
-
-echo
-echo "WARNING: This script is deprecated and will be removed soon."
-echo "Please consider using wic EFI images instead."
-echo
-
-# Set to 1 to enable additional output
-DEBUG=0
-OUT="/dev/null"
-
-#
-# Defaults
-#
-# 20 Mb for the boot partition
-BOOT_SIZE=20
-# 5% for swap
-SWAP_RATIO=5
-
-# Cleanup after die()
-cleanup() {
-        debug "Syncing and unmounting devices"
-        # Unmount anything we mounted
-        unmount $ROOTFS_MNT || error "Failed to unmount $ROOTFS_MNT"
-        unmount $BOOTFS_MNT || error "Failed to unmount $BOOTFS_MNT"
-        unmount $HDDIMG_ROOTFS_MNT || error "Failed to unmount $HDDIMG_ROOTFS_MNT"
-        unmount $HDDIMG_MNT || error "Failed to unmount $HDDIMG_MNT"
-
-        # Remove the TMPDIR
-        debug "Removing temporary files"
-        if [ -d "$TMPDIR" ]; then
-                rm -rf $TMPDIR || error "Failed to remove $TMPDIR"
-        fi
-}
-
-trap 'die "Signal Received, Aborting..."' HUP INT TERM
-
-# Logging routines
-WARNINGS=0
-ERRORS=0
-CLEAR="$(tput sgr0)"
-INFO="$(tput bold)"
-RED="$(tput setaf 1)$(tput bold)"
-GREEN="$(tput setaf 2)$(tput bold)"
-YELLOW="$(tput setaf 3)$(tput bold)"
-info() {
-        echo "${INFO}$1${CLEAR}"
-}
-error() {
-        ERRORS=$((ERRORS+1))
-        echo "${RED}$1${CLEAR}"
-}
-warn() {
-        WARNINGS=$((WARNINGS+1))
-        echo "${YELLOW}$1${CLEAR}"
-}
-success() {
-        echo "${GREEN}$1${CLEAR}"
-}
-die() {
-        error "$1"
-        cleanup
-        exit 1
-}
-debug() {
-        if [ $DEBUG -eq 1 ]; then
-                echo "$1"
-        fi
-}
-
-usage() {
-        echo "Usage: $(basename $0) [-v] DEVICE HDDIMG TARGET_DEVICE"
-        echo "       -v: Verbose debug"
-        echo "       DEVICE: The device to write the image to, e.g. /dev/sdh"
-        echo "       HDDIMG: The hddimg file to generate the efi disk from"
-        echo "       TARGET_DEVICE: The device the target will boot from, e.g.  /dev/mmcblk0"
-}
-
-image_details() {
-        IMG=$1
-        info "Image details"
-        echo "    image: $(stat --printf '%N\n' $IMG)"
-        echo "     size: $(stat -L --printf '%s bytes\n' $IMG)"
-        echo " modified: $(stat -L --printf '%y\n' $IMG)"
-        echo "     type: $(file -L -b $IMG)"
-        echo ""
-}
-
-device_details() {
-        DEV=$1
-        BLOCK_SIZE=512
-
-        info "Device details"
-        echo "  device: $DEVICE"
-        if [ -f "/sys/class/block/$DEV/device/vendor" ]; then
-                echo "  vendor: $(cat /sys/class/block/$DEV/device/vendor)"
-        else
-                echo "  vendor: UNKOWN"
-        fi
-        if [ -f "/sys/class/block/$DEV/device/model" ]; then
-                echo "   model: $(cat /sys/class/block/$DEV/device/model)"
-        else
-                echo "   model: UNKNOWN"
-        fi
-        if [ -f "/sys/class/block/$DEV/size" ]; then
-                echo "    size: $(($(cat /sys/class/block/$DEV/size) * $BLOCK_SIZE)) bytes"
-        else
-                echo "    size: UNKNOWN"
-        fi
-        echo ""
-}
-
-unmount_device() {
-        grep -q $DEVICE /proc/mounts
-        if [ $? -eq 0 ]; then
-                warn "$DEVICE listed in /proc/mounts, attempting to unmount"
-                umount $DEVICE* 2>/dev/null
-                return $?
-        fi
-        return 0
-}
-
-unmount() {
-        if [ "$1" = "" ] ; then
-                return 0
-        fi
-        grep -q $1 /proc/mounts
-        if [ $? -eq 0 ]; then
-                debug "Unmounting $1"
-                umount $1
-                return $?
-        fi
-        return 0
-}
-
-#
-# Parse and validate arguments
-#
-if [ $# -lt 3 ] || [ $# -gt 4 ]; then
-    if [ $# -eq 1 ]; then
-        AVAILABLE_DISK=`lsblk | grep "disk" | cut -f 1 -d " "`
-        X=0
-        for disk in `echo $AVAILABLE_DISK`; do
-            mounted=`lsblk /dev/$disk | awk {'print $7'} | sed "s/MOUNTPOINT//"`
-            if [ -z "$mounted" ]; then
-                UNMOUNTED_AVAILABLES="$UNMOUNTED_AVAILABLES /dev/$disk"
-                info "$X - /dev/$disk"
-                X=`expr $X + 1`
-            fi
-        done
-        if [ $X -eq 0 ]; then
-            die "No unmounted device found."
-        fi
-        read -p "Choose unmounted device number: " DISK_NUMBER
-        X=0
-        for line in `echo $UNMOUNTED_AVAILABLES`; do
-            if [ $DISK_NUMBER -eq $X ]; then
-                DISK_TO_BE_FLASHED=$line
-                break
-            else
-                X=`expr $X + 1`
-            fi
-        done
-        if [ -z "$DISK_TO_BE_FLASHED" ]; then
-            die "Option \"$DISK_NUMBER\" is invalid. Choose a valid option"
-        else
-            if [ -z `echo $DISK_TO_BE_FLASHED | grep "mmc"` ]; then
-                TARGET_TO_BE_BOOT="/dev/sda"
-            else
-                TARGET_TO_BE_BOOT="/dev/mmcblk0"
-            fi
-        fi
-        echo ""
-        echo "Choose a name of the device that will be boot from"
-        echo -n "Recommended name is: "
-        info "$TARGET_TO_BE_BOOT"
-        read -p "Is target device okay? [y/N]: " RESPONSE
-        if [ "$RESPONSE" != "y" ]; then
-            read -p "Choose target device name: " TARGET_TO_BE_BOOT
-        fi
-        echo ""
-        if [ -z "$TARGET_TO_BE_BOOT" ]; then
-            die "Error: choose a valid target name"
-        fi
-    else
-        usage
-            exit 1
-    fi
-fi
-
-if [ "$1" = "-v" ]; then
-        DEBUG=1
-        OUT="1"
-        shift
-fi
-
-if [ -z "$AVAILABLE_DISK" ]; then
-    DEVICE=$1
-    HDDIMG=$2
-    TARGET_DEVICE=$3
-else
-    DEVICE=$DISK_TO_BE_FLASHED
-    HDDIMG=$1
-    TARGET_DEVICE=$TARGET_TO_BE_BOOT
-fi
-
-LINK=$(readlink $DEVICE)
-if [ $? -eq 0 ]; then
-        DEVICE="$LINK"
-fi
-
-if [ ! -w "$DEVICE" ]; then
-        usage
-        if [ ! -e "${DEVICE}" ] ; then
-                die "Device $DEVICE cannot be found"
-        else
-                die "Device $DEVICE is not writable (need to run under sudo?)"
-        fi
-fi
-
-if [ ! -e "$HDDIMG" ]; then
-        usage
-        die "HDDIMG $HDDIMG does not exist"
-fi
-
-#
-# Ensure the hddimg is not mounted
-#
-unmount "$HDDIMG" || die "Failed to unmount $HDDIMG"
-
-#
-# Check if any $DEVICE partitions are mounted
-#
-unmount_device || die "Failed to unmount $DEVICE"
-
-#
-# Confirm device with user
-#
-image_details $HDDIMG
-device_details $(basename $DEVICE)
-echo -n "${INFO}Prepare EFI image on $DEVICE [y/N]?${CLEAR} "
-read RESPONSE
-if [ "$RESPONSE" != "y" ]; then
-        echo "Image creation aborted"
-        exit 0
-fi
-
-
-#
-# Prepare the temporary working space
-#
-TMPDIR=$(mktemp -d mkefidisk-XXX) || die "Failed to create temporary mounting directory."
-HDDIMG_MNT=$TMPDIR/hddimg
-HDDIMG_ROOTFS_MNT=$TMPDIR/hddimg_rootfs
-ROOTFS_MNT=$TMPDIR/rootfs
-BOOTFS_MNT=$TMPDIR/bootfs
-mkdir $HDDIMG_MNT || die "Failed to create $HDDIMG_MNT"
-mkdir $HDDIMG_ROOTFS_MNT || die "Failed to create $HDDIMG_ROOTFS_MNT"
-mkdir $ROOTFS_MNT || die "Failed to create $ROOTFS_MNT"
-mkdir $BOOTFS_MNT || die "Failed to create $BOOTFS_MNT"
-
-
-#
-# Partition $DEVICE
-#
-DEVICE_SIZE=$(parted -s $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//")
-# If the device size is not reported there may not be a valid label
-if [ "$DEVICE_SIZE" = "" ] ; then
-        parted -s $DEVICE mklabel msdos || die "Failed to create MSDOS partition table"
-        DEVICE_SIZE=$(parted -s $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//")
-fi
-SWAP_SIZE=$((DEVICE_SIZE*SWAP_RATIO/100))
-ROOTFS_SIZE=$((DEVICE_SIZE-BOOT_SIZE-SWAP_SIZE))
-ROOTFS_START=$((BOOT_SIZE))
-ROOTFS_END=$((ROOTFS_START+ROOTFS_SIZE))
-SWAP_START=$((ROOTFS_END))
-
-# MMC devices use a partition prefix character 'p'
-PART_PREFIX=""
-if [ ! "${DEVICE#/dev/mmcblk}" = "${DEVICE}" ] || [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then
-        PART_PREFIX="p"
-fi
-BOOTFS=$DEVICE${PART_PREFIX}1
-ROOTFS=$DEVICE${PART_PREFIX}2
-SWAP=$DEVICE${PART_PREFIX}3
-
-TARGET_PART_PREFIX=""
-if [ ! "${TARGET_DEVICE#/dev/mmcblk}" = "${TARGET_DEVICE}" ]; then
-        TARGET_PART_PREFIX="p"
-fi
-TARGET_ROOTFS=$TARGET_DEVICE${TARGET_PART_PREFIX}2
-TARGET_SWAP=$TARGET_DEVICE${TARGET_PART_PREFIX}3
-
-echo ""
-info "Boot partition size:   $BOOT_SIZE MB ($BOOTFS)"
-info "ROOTFS partition size: $ROOTFS_SIZE MB ($ROOTFS)"
-info "Swap partition size:   $SWAP_SIZE MB ($SWAP)"
-echo ""
-
-# Use MSDOS by default as GPT cannot be reliably distributed in disk image form
-# as it requires the backup table to be on the last block of the device, which
-# of course varies from device to device.
-
-info "Partitioning installation media ($DEVICE)"
-
-debug "Deleting partition table on $DEVICE"
-dd if=/dev/zero of=$DEVICE bs=512 count=2 >$OUT 2>&1 || die "Failed to zero beginning of $DEVICE"
-
-debug "Creating new partition table (MSDOS) on $DEVICE"
-parted -s $DEVICE mklabel msdos >$OUT 2>&1 || die "Failed to create MSDOS partition table"
-
-debug "Creating boot partition on $BOOTFS"
-parted -s $DEVICE mkpart primary 0% $BOOT_SIZE >$OUT 2>&1 || die "Failed to create BOOT partition"
-
-debug "Enabling boot flag on $BOOTFS"
-parted -s $DEVICE set 1 boot on >$OUT 2>&1 || die "Failed to enable boot flag"
-
-debug "Creating ROOTFS partition on $ROOTFS"
-parted -s $DEVICE mkpart primary $ROOTFS_START $ROOTFS_END >$OUT 2>&1 || die "Failed to create ROOTFS partition"
-
-debug "Creating swap partition on $SWAP"
-parted -s $DEVICE mkpart primary $SWAP_START 100% >$OUT 2>&1 || die "Failed to create SWAP partition"
-
-if [ $DEBUG -eq 1 ]; then
-        parted -s $DEVICE print
-fi
-
-
-#
-# Check if any $DEVICE partitions are mounted after partitioning
-#
-unmount_device || die "Failed to unmount $DEVICE partitions"
-
-
-#
-# Format $DEVICE partitions
-#
-info "Formatting partitions"
-debug "Formatting $BOOTFS as vfat"
-if [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then
-        mkfs.vfat -I $BOOTFS -n "EFI" >$OUT 2>&1 || die "Failed to format $BOOTFS"
-else
-        mkfs.vfat $BOOTFS -n "EFI" >$OUT 2>&1 || die "Failed to format $BOOTFS"
-fi
-
-debug "Formatting $ROOTFS as ext3"
-mkfs.ext3 -F $ROOTFS -L "ROOT" >$OUT 2>&1 || die "Failed to format $ROOTFS"
-
-debug "Formatting swap partition ($SWAP)"
-mkswap $SWAP >$OUT 2>&1 || die "Failed to prepare swap"
-
-
-#
-# Installing to $DEVICE
-#
-debug "Mounting images and device in preparation for installation"
-mount -o ro,loop $HDDIMG $HDDIMG_MNT >$OUT 2>&1 || error "Failed to mount $HDDIMG"
-mount -o ro,loop $HDDIMG_MNT/rootfs.img $HDDIMG_ROOTFS_MNT >$OUT 2>&1 || error "Failed to mount rootfs.img"
-mount $ROOTFS $ROOTFS_MNT >$OUT 2>&1 || error "Failed to mount $ROOTFS on $ROOTFS_MNT"
-mount $BOOTFS $BOOTFS_MNT >$OUT 2>&1 || error "Failed to mount $BOOTFS on $BOOTFS_MNT"
-
-info "Preparing boot partition"
-EFIDIR="$BOOTFS_MNT/EFI/BOOT"
-cp $HDDIMG_MNT/vmlinuz $BOOTFS_MNT >$OUT 2>&1 || error "Failed to copy vmlinuz"
-# Copy the efi loader and configs (booti*.efi and grub.cfg if it exists)
-cp -r $HDDIMG_MNT/EFI $BOOTFS_MNT >$OUT 2>&1 || error "Failed to copy EFI dir"
-# Silently ignore a missing systemd-boot loader dir (we might just be a GRUB image)
-cp -r $HDDIMG_MNT/loader $BOOTFS_MNT >$OUT 2>&1
-
-# Update the boot loaders configurations for an installed image
-# Remove any existing root= kernel parameters and:
-# o Add a root= parameter with the target rootfs
-# o Specify ro so fsck can be run during boot
-# o Specify rootwait in case the target media is an asyncronous block device
-#   such as MMC or USB disks
-# o Specify "quiet" to minimize boot time when using slow serial consoles
-
-# Look for a GRUB installation
-GRUB_CFG="$EFIDIR/grub.cfg"
-if [ -e "$GRUB_CFG" ]; then
-        info "Configuring GRUB"
-        # Delete the install entry
-        sed -i "/menuentry 'install'/,/^}/d" $GRUB_CFG
-        # Delete the initrd lines
-        sed -i "/initrd /d" $GRUB_CFG
-        # Delete any LABEL= strings
-        sed -i "s/ LABEL=[^ ]*/ /" $GRUB_CFG
-
-        sed -i "s@ root=[^ ]*@ @" $GRUB_CFG
-        sed -i "s@vmlinuz @vmlinuz root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $GRUB_CFG
-fi
-
-# Look for a systemd-boot installation
-SYSTEMD_BOOT_ENTRIES="$BOOTFS_MNT/loader/entries"
-SYSTEMD_BOOT_CFG="$SYSTEMD_BOOT_ENTRIES/boot.conf"
-if [ -d "$SYSTEMD_BOOT_ENTRIES" ]; then
-        info "Configuring SystemD-boot"
-        # remove the install target if it exists
-        rm $SYSTEMD_BOOT_ENTRIES/install.conf >$OUT 2>&1
-
-        if [ ! -e "$SYSTEMD_BOOT_CFG" ]; then
-                echo "ERROR: $SYSTEMD_BOOT_CFG not found"
-        fi
-
-        sed -i "/initrd /d" $SYSTEMD_BOOT_CFG
-        sed -i "s@ root=[^ ]*@ @" $SYSTEMD_BOOT_CFG
-        sed -i "s@options *LABEL=boot @options LABEL=Boot root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $SYSTEMD_BOOT_CFG
-fi
-
-# Ensure we have at least one EFI bootloader configured
-if [ ! -e $GRUB_CFG ] && [ ! -e $SYSTEMD_BOOT_CFG ]; then
-        die "No EFI bootloader configuration found"
-fi
-
-
-info "Copying ROOTFS files (this may take a while)"
-cp -a $HDDIMG_ROOTFS_MNT/* $ROOTFS_MNT >$OUT 2>&1 || die "Root FS copy failed"
-
-echo "$TARGET_SWAP     swap             swap       defaults              0 0" >> $ROOTFS_MNT/etc/fstab
-
-# We dont want udev to mount our root device while we're booting...
-if [ -d $ROOTFS_MNT/etc/udev/ ] ; then
-        echo "$TARGET_DEVICE" >> $ROOTFS_MNT/etc/udev/mount.blacklist
-fi
-
-# Add startup.nsh script for automated boot
-printf "fs0:\%s\BOOT\%s\n" "EFI" "bootx64.efi" > $BOOTFS_MNT/startup.nsh
-
-
-# Call cleanup to unmount devices and images and remove the TMPDIR
-cleanup
-
-echo ""
-if [ $WARNINGS -ne 0 ] && [ $ERRORS -eq 0 ]; then
-        echo "${YELLOW}Installation completed with warnings${CLEAR}"
-        echo "${YELLOW}Warnings: $WARNINGS${CLEAR}"
-elif [ $ERRORS -ne 0 ]; then
-        echo "${RED}Installation encountered errors${CLEAR}"
-        echo "${RED}Errors: $ERRORS${CLEAR}"
-        echo "${YELLOW}Warnings: $WARNINGS${CLEAR}"
-else
-        success "Installation completed successfully"
-fi
-echo ""