2 files changed, 3 insertions, 279 deletions

diff --git a/meta/recipes-core/initrdscripts/initramfs-framework/install-efi.sh b/meta/recipes-core/initrdscripts/initramfs-framework/install-efi.sh
deleted file mode 100644
index 5ad3a60c05..0000000000
--- a/meta/recipes-core/initrdscripts/initramfs-framework/install-efi.sh
+++ /dev/null
@@ -1,276 +0,0 @@
-#!/bin/sh -e
-#
-# Copyright (c) 2012, Intel Corporation.
-# All rights reserved.
-#
-# install.sh [device_name] [rootfs_name]
-#
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-# We need 20 Mb for the boot partition
-boot_size=20
-
-# 5% for swap
-swap_ratio=5
-
-# Get a list of hard drives
-hdnamelist=""
-live_dev_name=`cat /proc/mounts | grep ${1%/} | awk '{print $1}'`
-live_dev_name=${live_dev_name#\/dev/}
-# Only strip the digit identifier if the device is not an mmc
-case $live_dev_name in
-    mmcblk*)
-    ;;
-    nvme*)
-    ;;
-    *)
-        live_dev_name=${live_dev_name%%[0-9]*}
-    ;;
-esac
-
-echo "Searching for hard drives ..."
-
-# Some eMMC devices have special sub devices such as mmcblk0boot0 etc
-# we're currently only interested in the root device so pick them wisely
-devices=`ls /sys/block/ | grep -v mmcblk` || true
-mmc_devices=`ls /sys/block/ | grep "mmcblk[0-9]\{1,\}$"` || true
-devices="$devices $mmc_devices"
-
-for device in $devices; do
-    case $device in
-        loop*)
-            # skip loop device
-            ;;
-        sr*)
-            # skip CDROM device
-            ;;
-        ram*)
-            # skip ram device
-            ;;
-        *)
-            # skip the device LiveOS is on
-            # Add valid hard drive name to the list
-            case $device in
-                $live_dev_name*)
-                # skip the device we are running from
-                ;;
-                *)
-                    hdnamelist="$hdnamelist $device"
-                ;;
-            esac
-            ;;
-    esac
-done
-
-if [ -z "${hdnamelist}" ]; then
-    echo "You need another device (besides the live device /dev/${live_dev_name}) to install the image. Installation aborted."
-    exit 1
-fi
-
-TARGET_DEVICE_NAME=""
-for hdname in $hdnamelist; do
-    # Display found hard drives and their basic info
-    echo "-------------------------------"
-    echo /dev/$hdname
-    if [ -r /sys/block/$hdname/device/vendor ]; then
-        echo -n "VENDOR="
-        cat /sys/block/$hdname/device/vendor
-    fi
-    if [ -r /sys/block/$hdname/device/model ]; then
-        echo -n "MODEL="
-        cat /sys/block/$hdname/device/model
-    fi
-    if [ -r /sys/block/$hdname/device/uevent ]; then
-        echo -n "UEVENT="
-        cat /sys/block/$hdname/device/uevent
-    fi
-    echo
-done
-
-# Get user choice
-while true; do
-    echo "Please select an install target or press n to exit ($hdnamelist ): "
-    read answer
-    if [ "$answer" = "n" ]; then
-        echo "Installation manually aborted."
-        exit 1
-    fi
-    for hdname in $hdnamelist; do
-        if [ "$answer" = "$hdname" ]; then
-            TARGET_DEVICE_NAME=$answer
-            break
-        fi
-    done
-    if [ -n "$TARGET_DEVICE_NAME" ]; then
-        break
-    fi
-done
-
-if [ -n "$TARGET_DEVICE_NAME" ]; then
-    echo "Installing image on /dev/$TARGET_DEVICE_NAME ..."
-else
-    echo "No hard drive selected. Installation aborted."
-    exit 1
-fi
-
-device=/dev/$TARGET_DEVICE_NAME
-
-#
-# The udev automounter can cause pain here, kill it
-#
-rm -f /etc/udev/rules.d/automount.rules
-rm -f /etc/udev/scripts/mount*
-
-#
-# Unmount anything the automounter had mounted
-#
-umount ${device}* 2> /dev/null || /bin/true
-
-mkdir -p /tmp
-
-# Create /etc/mtab if not present
-if [ ! -e /etc/mtab ] && [ -e /proc/mounts ]; then
-    ln -sf /proc/mounts /etc/mtab
-fi
-
-disk_size=$(parted ${device} unit mb print | grep '^Disk .*: .*MB' | cut -d" " -f 3 | sed -e "s/MB//")
-
-swap_size=$((disk_size*swap_ratio/100))
-rootfs_size=$((disk_size-boot_size-swap_size))
-
-rootfs_start=$((boot_size))
-rootfs_end=$((rootfs_start+rootfs_size))
-swap_start=$((rootfs_end))
-
-# MMC devices are special in a couple of ways
-# 1) they use a partition prefix character 'p'
-# 2) they are detected asynchronously (need rootwait)
-rootwait=""
-part_prefix=""
-if [ ! "${device#/dev/mmcblk}" = "${device}" ] || \
-   [ ! "${device#/dev/nvme}" = "${device}" ]; then
-    part_prefix="p"
-    rootwait="rootwait"
-fi
-
-# USB devices also require rootwait
-if [ -n `readlink /dev/disk/by-id/usb* | grep $TARGET_DEVICE_NAME` ]; then
-    rootwait="rootwait"
-fi
-
-bootfs=${device}${part_prefix}1
-rootfs=${device}${part_prefix}2
-swap=${device}${part_prefix}3
-
-echo "*****************"
-echo "Boot partition size:   $boot_size MB ($bootfs)"
-echo "Rootfs partition size: $rootfs_size MB ($rootfs)"
-echo "Swap partition size:   $swap_size MB ($swap)"
-echo "*****************"
-echo "Deleting partition table on ${device} ..."
-dd if=/dev/zero of=${device} bs=512 count=35
-
-echo "Creating new partition table on ${device} ..."
-parted ${device} mklabel gpt
-
-echo "Creating boot partition on $bootfs"
-parted ${device} mkpart boot fat32 0% $boot_size
-parted ${device} set 1 boot on
-
-echo "Creating rootfs partition on $rootfs"
-parted ${device} mkpart root ext3 $rootfs_start $rootfs_end
-
-echo "Creating swap partition on $swap"
-parted ${device} mkpart swap linux-swap $swap_start 100%
-
-parted ${device} print
-
-echo "Formatting $bootfs to vfat..."
-mkfs.vfat $bootfs
-
-echo "Formatting $rootfs to ext3..."
-mkfs.ext3 $rootfs
-
-echo "Formatting swap partition...($swap)"
-mkswap $swap
-
-mkdir /tgt_root
-mkdir /src_root
-mkdir -p /boot
-
-# Handling of the target root partition
-mount $rootfs /tgt_root
-mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root
-echo "Copying rootfs files..."
-cp -a /src_root/* /tgt_root
-if [ -d /tgt_root/etc/ ] ; then
-    boot_uuid=$(blkid -o value -s UUID ${bootfs})
-    swap_part_uuid=$(blkid -o value -s PARTUUID ${swap})
-    echo "/dev/disk/by-partuuid/$swap_part_uuid                swap             swap       defaults              0  0" >> /tgt_root/etc/fstab
-    echo "UUID=$boot_uuid              /boot            vfat       defaults              1  2" >> /tgt_root/etc/fstab
-    # We dont want udev to mount our root device while we're booting...
-    if [ -d /tgt_root/etc/udev/ ] ; then
-        echo "${device}" >> /tgt_root/etc/udev/mount.blacklist
-    fi
-fi
-
-umount /src_root
-
-# Handling of the target boot partition
-mount $bootfs /boot
-echo "Preparing boot partition..."
-
-EFIDIR="/boot/EFI/BOOT"
-mkdir -p $EFIDIR
-# Copy the efi loader
-cp /run/media/$1/EFI/BOOT/*.efi $EFIDIR
-
-if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then
-    root_part_uuid=$(blkid -o value -s PARTUUID ${rootfs})
-    GRUBCFG="$EFIDIR/grub.cfg"
-    cp /run/media/$1/EFI/BOOT/grub.cfg $GRUBCFG
-    # Update grub config for the installed image
-    # Delete the install entry
-    sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG
-    # Delete the initrd lines
-    sed -i "/initrd /d" $GRUBCFG
-    # Delete any LABEL= strings
-    sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG
-    # Delete any root= strings
-    sed -i "s/ root=[^ ]*/ /g" $GRUBCFG
-    # Add the root= and other standard boot options
-    sed -i "s@linux /vmlinuz *@linux /vmlinuz root=PARTUUID=$root_part_uuid rw $rootwait quiet @" $GRUBCFG
-fi
-
-if [ -d /run/media/$1/loader ]; then
-    rootuuid=$(blkid -o value -s PARTUUID ${rootfs})
-    SYSTEMDBOOT_CFGS="/boot/loader/entries/*.conf"
-    # copy config files for systemd-boot
-    cp -dr /run/media/$1/loader /boot
-    # delete the install entry
-    rm -f /boot/loader/entries/install.conf
-    # delete the initrd lines
-    sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
-    # delete any LABEL= strings
-    sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
-    # delete any root= strings
-    sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
-    # add the root= and other standard boot options
-    sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $SYSTEMDBOOT_CFGS
-fi
-
-umount /tgt_root
-
-cp /run/media/$1/vmlinuz /boot
-
-umount /boot
-
-sync
-
-echo "Remove your installation media, and press ENTER"
-
-read enter
-
-echo "Rebooting..."
-reboot -f
diff --git a/meta/recipes-core/initrdscripts/initramfs-module-install-efi_1.0.bb b/meta/recipes-core/initrdscripts/initramfs-module-install-efi_1.0.bb
index 2270441d06..3d8c9e7ebb 100644
--- a/meta/recipes-core/initrdscripts/initramfs-module-install-efi_1.0.bb
+++ b/meta/recipes-core/initrdscripts/initramfs-module-install-efi_1.0.bb
@@ -7,14 +7,14 @@ PR = "r4"
 
 inherit allarch
 
-FILESEXTRAPATHS_prepend := "${THISDIR}/initramfs-framework:"
-SRC_URI = "file://install-efi.sh"
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+SRC_URI = "file://init-install-efi.sh"
 
 S = "${WORKDIR}"
 
 do_install() {
     install -d ${D}/init.d
-    install -m 0755 ${WORKDIR}/install-efi.sh ${D}/init.d/install-efi.sh
+    install -m 0755 ${WORKDIR}/init-install-efi.sh ${D}/init.d/install-efi.sh
 }
 
 FILES_${PN} = "/init.d/install-efi.sh"