1 files changed, 91 insertions, 0 deletions

diff --git a/meta/recipes-kernel/linux/linux.inc b/meta/recipes-kernel/linux/linux.inc
new file mode 100644
index 0000000000..6f4db987d4
--- /dev/null
+++ b/meta/recipes-kernel/linux/linux.inc
@@ -0,0 +1,91 @@
+DESCRIPTION = "Linux Kernel"
+SECTION = "kernel"
+LICENSE = "GPL"
+
+inherit kernel
+
+DEPENDS_append_em-x270 = " mtd-utils "
+
+RPSRC = "http://www.rpsys.net/openzaurus/patches/archive"
+
+# Specify the commandline for your device
+
+#boot from mmc
+CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=5"
+#boot from nfs
+#CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=301 root=/dev/nfs nfsroot=172.20.3.1:/data/at91 ip=172.20.0.5:::255.255.0.0"
+
+do_configure_prepend() {
+        echo "" > ${S}/.config
+
+        #
+        # logo support, if you supply logo_linux_clut224.ppm in SRC_URI, then it's going to be used
+        #
+        if [ -e ${WORKDIR}/logo_linux_clut224.ppm ]; then
+                install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+                echo "CONFIG_LOGO=y"                    >> ${S}/.config
+                echo "CONFIG_LOGO_LINUX_CLUT224=y"      >> ${S}/.config
+        fi
+
+        #
+        # oabi / eabi support
+        #
+        if [ "${TARGET_OS}" = "linux-gnueabi" -o  "${TARGET_OS}" = "linux-uclibcgnueabi" ]; then
+                echo "CONFIG_AEABI=y"                   >> ${S}/.config
+                echo "# CONFIG_OABI_COMPAT is not set"             >> ${S}/.config
+        else
+                echo "# CONFIG_AEABI is not set"        >> ${S}/.config
+                echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+        fi
+
+        echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
+
+        sed -e '/CONFIG_AEABI/d' \
+            -e '/CONFIG_OABI_COMPAT=/d' \
+            -e '/CONFIG_CMDLINE=/d' \
+            -e '/CONFIG_LOGO=/d' \
+            -e '/CONFIG_LOGO_LINUX_CLUT224=/d' \
+            < '${WORKDIR}/defconfig' >>'${S}/.config'
+
+        #
+        # root-over-nfs-over-usb-eth support. Limited, but should cover some cases.
+        # Enable this by setting a proper CMDLINE_NFSROOT_USB.
+        #
+        if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
+                oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
+                sed -e '/CONFIG_INET/d' \
+                    -e '/CONFIG_IP_PNP=/d' \
+                    -e '/CONFIG_USB_GADGET=/d' \
+                    -e '/CONFIG_USB_GADGET_SELECTED=/d' \
+                    -e '/CONFIG_USB_ETH=/d' \
+                    -e '/CONFIG_NFS_FS=/d' \
+                    -e '/CONFIG_ROOT_NFS=/d' \
+                    -e '/CONFIG_CMDLINE=/d' \
+                    -i ${S}/.config
+                echo "CONFIG_INET=y"                     >> ${S}/.config
+                echo "CONFIG_IP_PNP=y"                   >> ${S}/.config
+                echo "CONFIG_USB_GADGET=y"               >> ${S}/.config
+                echo "CONFIG_USB_GADGET_SELECTED=y"      >> ${S}/.config
+                echo "CONFIG_USB_ETH=y"                  >> ${S}/.config
+                echo "CONFIG_NFS_FS=y"                   >> ${S}/.config
+                echo "CONFIG_ROOT_NFS=y"                 >> ${S}/.config
+                echo "CONFIG_CMDLINE=\"${CMDLINE_NFSROOT_USB}\"" >> ${S}/.config
+        fi
+        yes '' | oe_runmake oldconfig
+}
+
+
+
+do_install_prepend() {
+        if test -e arch/${ARCH}/boot/Image ; then
+             ln -f arch/${ARCH}/boot/Image arch/${ARCH}/boot/uImage
+        fi
+
+        if test -e arch/${ARCH}/boot/images/uImage ; then
+             ln -f arch/${ARCH}/boot/images/uImage arch/${ARCH}/boot/uImage
+        fi
+
+        if test -e arch/${ARCH}/kernel/vmlinux.lds ; then
+             ln -f arch/${ARCH}/kernel/vmlinux.lds arch/${ARCH}/boot/vmlinux
+        fi
+}