1 files changed, 222 insertions, 0 deletions

diff --git a/meta/recipes-devtools/python/python3_3.5.0.bb b/meta/recipes-devtools/python/python3_3.5.0.bb
new file mode 100644
index 0000000000..d0872be2b6
--- /dev/null
+++ b/meta/recipes-devtools/python/python3_3.5.0.bb
@@ -0,0 +1,222 @@
+require recipes-devtools/python/python.inc
+
+DEPENDS = "python3-native libffi bzip2 db gdbm openssl readline sqlite3 zlib virtual/libintl xz"
+PR = "${INC_PR}.0"
+PYTHON_MAJMIN = "3.5"
+PYTHON_BINABI= "${PYTHON_MAJMIN}m"
+DISTRO_SRC_URI ?= "file://sitecustomize.py"
+DISTRO_SRC_URI_linuxstdbase = ""
+SRC_URI = "http://www.python.org/ftp/python/${PV}/Python-${PV}.tar.xz \
+file://python-config.patch \
+file://000-cross-compile.patch \
+file://020-dont-compile-python-files.patch \
+file://030-fixup-include-dirs.patch \
+file://070-dont-clean-ipkg-install.patch \
+file://080-distutils-dont_adjust_files.patch \
+file://110-enable-zlib.patch \
+file://130-readline-setup.patch \
+file://150-fix-setupterm.patch \
+file://0001-h2py-Fix-issue-13032-where-it-fails-with-UnicodeDeco.patch \
+${DISTRO_SRC_URI} \
+"
+
+SRC_URI += "\
+            file://03-fix-tkinter-detection.patch \
+            file://04-default-is-optimized.patch \
+            file://avoid_warning_about_tkinter.patch \
+            file://cgi_py.patch \
+            file://host_include_contamination.patch \
+            file://python-3.3-multilib.patch \
+            file://shutil-follow-symlink-fix.patch \
+            file://sysroot-include-headers.patch \
+            file://unixccompiler.patch \
+            file://avoid-ncursesw-include-path.patch \
+            file://python3-use-CROSSPYTHONPATH-for-PYTHON_FOR_BUILD.patch \
+            file://python3-setup.py-no-host-headers-libs.patch \
+            file://sysconfig.py-add-_PYTHON_PROJECT_SRC.patch \
+            file://setup.py-check-cross_compiling-when-get-FLAGS.patch \
+            file://setup.py-find-libraries-in-staging-dirs.patch \
+            file://use_packed_importlib.patch \
+           "
+SRC_URI[md5sum] = "d149d2812f10cbe04c042232e7964171"
+SRC_URI[sha256sum] = "d6d7aa1634a5eeeca6ed4fca266982a04f84bd8f3945a9179e20b24ad2e2be91"
+
+LIC_FILES_CHKSUM = "file://LICENSE;md5=dd98d01d471fac8d8dbdd975229dba03"
+
+S = "${WORKDIR}/Python-${PV}"
+
+inherit autotools multilib_header python3native pkgconfig
+
+CONFIGUREOPTS += " --with-system-ffi "
+
+CACHED_CONFIGUREVARS = "ac_cv_have_chflags=no \
+                ac_cv_have_lchflags=no \
+                ac_cv_have_long_long_format=yes \
+                ac_cv_buggy_getaddrinfo=no \
+                ac_cv_file__dev_ptmx=yes \
+                ac_cv_file__dev_ptc=no \
+"
+
+TARGET_CC_ARCH += "-DNDEBUG -fno-inline"
+EXTRA_OEMAKE += "CROSS_COMPILE=yes"
+EXTRA_OECONF += "CROSSPYTHONPATH=${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/ --without-ensurepip"
+
+export CROSS_COMPILE = "${TARGET_PREFIX}"
+export _PYTHON_PROJECT_BASE = "${B}"
+export _PYTHON_PROJECT_SRC = "${S}"
+export CCSHARED = "-fPIC"
+
+# Fix ctypes cross compilation
+export CROSSPYTHONPATH = "${B}/build/lib.linux-${TARGET_ARCH}-${PYTHON_MAJMIN}:${S}/Lib:${S}/Lib/plat-linux"
+
+# No ctypes option for python 3
+PYTHONLSBOPTS = ""
+
+do_configure_append() {
+        rm -f ${S}/Makefile.orig
+        autoreconf -Wcross --verbose --install --force --exclude=autopoint ../Python-${PV}/Modules/_ctypes/libffi
+}
+
+do_compile() {
+        # regenerate platform specific files, because they depend on system headers
+        cd ${S}/Lib/plat-linux*
+        include=${STAGING_INCDIR} ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+                ${S}/Tools/scripts/h2py.py -i '(u_long)' \
+                ${STAGING_INCDIR}/dlfcn.h \
+                ${STAGING_INCDIR}/linux/cdrom.h \
+                ${STAGING_INCDIR}/netinet/in.h \
+                ${STAGING_INCDIR}/sys/types.h
+        sed -e 's,${STAGING_DIR_HOST},,g' -i *.py
+        cd -
+
+
+        # remove any bogus LD_LIBRARY_PATH
+        sed -i -e s,RUNSHARED=.*,RUNSHARED=, Makefile
+
+        if [ ! -f Makefile.orig ]; then
+                install -m 0644 Makefile Makefile.orig
+        fi
+        sed -i -e 's,^CONFIGURE_LDFLAGS=.*,CONFIGURE_LDFLAGS=-L. -L${STAGING_LIBDIR},g' \
+                -e 's,libdir=${libdir},libdir=${STAGING_LIBDIR},g' \
+                -e 's,libexecdir=${libexecdir},libexecdir=${STAGING_DIR_HOST}${libexecdir},g' \
+                -e 's,^LIBDIR=.*,LIBDIR=${STAGING_LIBDIR},g' \
+                -e 's,includedir=${includedir},includedir=${STAGING_INCDIR},g' \
+                -e 's,^INCLUDEDIR=.*,INCLUDE=${STAGING_INCDIR},g' \
+                -e 's,^CONFINCLUDEDIR=.*,CONFINCLUDE=${STAGING_INCDIR},g' \
+                Makefile
+        # save copy of it now, because if we do it in do_install and 
+        # then call do_install twice we get Makefile.orig == Makefile.sysroot
+        install -m 0644 Makefile Makefile.sysroot
+
+        oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
+                HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+                STAGING_LIBDIR=${STAGING_LIBDIR} \
+                STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
+                STAGING_INCDIR=${STAGING_INCDIR} \
+                BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} \
+                LIB=${baselib} \
+                ARCH=${TARGET_ARCH} \
+                OPT="${CFLAGS}" libpython3.so
+
+        oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
+                HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+                STAGING_LIBDIR=${STAGING_LIBDIR} \
+                STAGING_INCDIR=${STAGING_INCDIR} \
+                STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
+                BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} \
+                LIB=${baselib} \
+                ARCH=${TARGET_ARCH} \
+                OPT="${CFLAGS}"
+}
+
+do_install() {
+        # make install needs the original Makefile, or otherwise the inclues would
+        # go to ${D}${STAGING...}/...
+        install -m 0644 Makefile.orig Makefile
+
+        install -d ${D}${libdir}/pkgconfig
+        install -d ${D}${libdir}/python${PYTHON_MAJMIN}/config
+
+        # rerun the build once again with original makefile this time
+        # run install in a separate step to avoid compile/install race
+        oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
+                HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+                STAGING_LIBDIR=${STAGING_LIBDIR} \
+                STAGING_INCDIR=${STAGING_INCDIR} \
+                STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
+                BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} \
+                LIB=${baselib} \
+                ARCH=${TARGET_ARCH} \
+                DESTDIR=${D} LIBDIR=${libdir}
+        
+        oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
+                HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+                STAGING_LIBDIR=${STAGING_LIBDIR} \
+                STAGING_INCDIR=${STAGING_INCDIR} \
+                STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
+                BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} \
+                LIB=${baselib} \
+                ARCH=${TARGET_ARCH} \
+                DESTDIR=${D} LIBDIR=${libdir} install
+
+        # avoid conflict with 2to3 from Python 2
+        rm -f ${D}/${bindir}/2to3
+
+        install -m 0644 Makefile.sysroot ${D}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
+
+        if [ -e ${WORKDIR}/sitecustomize.py ]; then
+                install -m 0644 ${WORKDIR}/sitecustomize.py ${D}/${libdir}/python${PYTHON_MAJMIN}
+        fi
+
+        oe_multilib_header python${PYTHON_BINABI}/pyconfig.h
+}
+
+do_install_append_class-nativesdk () {
+        create_wrapper ${D}${bindir}/python${PYTHON_MAJMIN} TERMINFO_DIRS='${sysconfdir}/terminfo:/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo'
+}
+
+SSTATE_SCAN_FILES += "Makefile"
+PACKAGE_PREPROCESS_FUNCS += "py_package_preprocess"
+
+py_package_preprocess () {
+        # copy back the old Makefile to fix target package
+        install -m 0644 ${B}/Makefile.orig ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
+        # Remove references to buildmachine paths in target Makefile and _sysconfigdata
+        sed -i -e 's:--sysroot=${STAGING_DIR_TARGET}::g' -e s:'--with-libtool-sysroot=${STAGING_DIR_TARGET}'::g \
+                ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile \
+                ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py
+}
+
+require python-${PYTHON_MAJMIN}-manifest.inc
+
+# manual dependency additions
+RPROVIDES_${PN}-core = "${PN}"
+RRECOMMENDS_${PN}-core = "${PN}-readline"
+RRECOMMENDS_${PN}-crypt = "openssl"
+RRECOMMENDS_${PN}-crypt_class-nativesdk = "nativesdk-openssl"
+
+FILES_${PN}-2to3 += "${bindir}/2to3-${PYTHON_MAJMIN}"
+FILES_${PN}-pydoc += "${bindir}/pydoc${PYTHON_MAJMIN} ${bindir}/pydoc3"
+FILES_${PN}-idle += "${bindir}/idle3 ${bindir}/idle${PYTHON_MAJMIN}"
+
+PACKAGES =+ "${PN}-pyvenv"
+FILES_${PN}-pyvenv += "${bindir}/pyvenv-${PYTHON_MAJMIN} ${bindir}/pyvenv"
+
+# package libpython3
+PACKAGES =+ "libpython3 libpython3-staticdev"
+FILES_libpython3 = "${libdir}/libpython*.so.*"
+FILES_libpython3-staticdev += "${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_BINABI}/libpython${PYTHON_BINABI}.a"
+
+# catch debug extensions (isn't that already in python-core-dbg?)
+FILES_${PN}-dbg += "${libdir}/python${PYTHON_MAJMIN}/lib-dynload/.debug"
+
+# catch all the rest (unsorted)
+PACKAGES += "${PN}-misc"
+RDEPENDS_${PN}-misc += "${PN}-core"
+FILES_${PN}-misc = "${libdir}/python${PYTHON_MAJMIN}"
+
+# catch manpage
+PACKAGES += "${PN}-man"
+FILES_${PN}-man = "${datadir}/man"
+
+BBCLASSEXTEND = "nativesdk"