1 files changed, 220 insertions, 0 deletions

diff --git a/meta/recipes-core/initrdscripts/files/init-install-testfs.sh b/meta/recipes-core/initrdscripts/files/init-install-testfs.sh
new file mode 100644
index 0000000000..ac62160528
--- /dev/null
+++ b/meta/recipes-core/initrdscripts/files/init-install-testfs.sh
@@ -0,0 +1,220 @@
+#!/bin/sh -e
+#
+# Copyright (C) 2008-2011 Intel
+#
+# install.sh [device_name] [rootfs_name] [video_mode] [vga_mode]
+#
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+# We need 20 Mb for the boot partition
+boot_size=200
+
+# 50% for the the test partition
+testfs_ratio=50
+
+# Get a list of hard drives
+hdnamelist=""
+live_dev_name=${1%%/*}
+
+echo "Searching for hard drives ..."
+
+for device in `ls /sys/block/`; do
+    case $device in
+        loop*)
+            # skip loop device
+            ;;
+        ram*)
+            # skip ram device
+            ;;
+        *)
+            # skip the device LiveOS is on
+            # Add valid hard drive name to the list
+            if [ $device != $live_dev_name -a -e /dev/$device ]; then
+                hdnamelist="$hdnamelist $device"
+            fi
+            ;;
+    esac
+done
+
+TARGET_DEVICE_NAME=""
+for hdname in $hdnamelist; do
+    # Display found hard drives and their basic info
+    echo "-------------------------------"
+    echo /dev/$hdname
+    if [ -r /sys/block/$hdname/device/vendor ]; then
+        echo -n "VENDOR="
+        cat /sys/block/$hdname/device/vendor
+    fi
+    echo -n "MODEL="
+    cat /sys/block/$hdname/device/model
+    cat /sys/block/$hdname/device/uevent
+    echo
+    # Get user choice
+    while true; do
+        echo -n "Do you want to install this image there? [y/n] "
+        read answer
+        if [ "$answer" = "y" -o "$answer" = "n" ]; then
+            break
+        fi
+        echo "Please answer y or n"
+    done
+    if [ "$answer" = "y" ]; then
+        TARGET_DEVICE_NAME=$hdname
+        break
+    fi
+done
+
+if [ -n "$TARGET_DEVICE_NAME" ]; then
+    echo "Installing image on /dev/$TARGET_DEVICE_NAME ..."
+else
+    echo "No hard drive selected. Installation aborted."
+    exit 1
+fi
+
+device=$TARGET_DEVICE_NAME
+
+#
+# The udev automounter can cause pain here, kill it
+#
+rm -f /etc/udev/rules.d/automount.rules
+rm -f /etc/udev/scripts/mount*
+
+#
+# Unmount anything the automounter had mounted
+#
+umount /dev/${device}* 2> /dev/null || /bin/true
+
+if [ ! -b /dev/loop0 ] ; then
+    mknod /dev/loop0 b 7 0
+fi
+
+mkdir -p /tmp
+if [ ! -L /etc/mtab ]; then
+        cat /proc/mounts > /etc/mtab
+fi
+
+disk_size=$(parted /dev/${device} unit mb print | grep Disk | cut -d" " -f 3 | sed -e "s/MB//")
+
+testfs_size=$((disk_size*testfs_ratio/100))
+rootfs_size=$((disk_size-boot_size-testfs_size))
+
+rootfs_start=$((boot_size))
+rootfs_end=$((rootfs_start+rootfs_size))
+testfs_start=$((rootfs_end))
+
+# MMC devices are special in a couple of ways
+# 1) they use a partition prefix character 'p'
+# 2) they are detected asynchronously (need rootwait)
+rootwait=""
+part_prefix=""
+if [ ! "${device#mmcblk}" = "${device}" ]; then
+        part_prefix="p"
+        rootwait="rootwait"
+fi
+bootfs=/dev/${device}${part_prefix}1
+rootfs=/dev/${device}${part_prefix}2
+testfs=/dev/${device}${part_prefix}3
+
+echo "*****************"
+echo "Boot partition size:   $boot_size MB ($bootfs)"
+echo "Rootfs partition size: $rootfs_size MB ($rootfs)"
+echo "Testfs partition size: $testfs_size MB ($testfs)"
+echo "*****************"
+echo "Deleting partition table on /dev/${device} ..."
+dd if=/dev/zero of=/dev/${device} bs=512 count=2
+
+echo "Creating new partition table on /dev/${device} ..."
+parted /dev/${device} mklabel msdos
+
+echo "Creating boot partition on $bootfs"
+parted /dev/${device} mkpart primary 0% $boot_size
+
+echo "Creating rootfs partition on $rootfs"
+parted /dev/${device} mkpart primary $rootfs_start $rootfs_end
+
+echo "Creating testfs partition on $testfs"
+parted /dev/${device} mkpart primary $testfs_start 100%
+
+parted /dev/${device} print
+
+echo "Formatting $bootfs to ext3..."
+mkfs.ext3 -L "boot" $bootfs
+
+echo "Formatting $rootfs to ext3..."
+mkfs.ext3 -L "rootfs" $rootfs
+
+echo "Formatting $testfs to ext3..."
+mkfs.ext3 -L "testrootfs" $testfs
+
+mkdir /tgt_root
+mkdir /src_root
+mkdir -p /boot
+
+# Handling of the target root partition
+mount $rootfs /tgt_root
+mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root
+
+echo "Copying rootfs files..."
+cp -a /src_root/* /tgt_root
+
+touch /tgt_root/etc/masterimage
+
+if [ -d /tgt_root/etc/ ] ; then
+    echo "$bootfs              /boot            ext3       defaults              1  2" >> /tgt_root/etc/fstab
+    # We dont want udev to mount our root device while we're booting...
+    if [ -d /tgt_root/etc/udev/ ] ; then
+        echo "/dev/${device}" >> /tgt_root/etc/udev/mount.blacklist
+    fi
+fi
+umount /tgt_root
+umount /src_root
+
+# Handling of the target boot partition
+mount $bootfs /boot
+echo "Preparing boot partition..."
+if [ -f /etc/grub.d/00_header ] ; then
+    echo "Preparing custom grub2 menu..."
+    GRUBCFG="/boot/grub/grub.cfg"
+    mkdir -p $(dirname $GRUBCFG)
+    cat >$GRUBCFG <<_EOF 
+serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1
+terminal_input --append  serial
+terminal_output --append serial
+set timeout_style=hidden
+set timeout=5
+menuentry "Linux" {
+    set root=(hd0,1)
+    linux /vmlinuz root=$rootfs $rootwait rw $5 $3 $4 quiet
+}
+_EOF
+    # Add the test label
+    echo -ne "\nmenuentry 'test' --hotkey x {\nlinux /test-kernel root=$testfs rw $rootwait quiet\n}\n" >> $GRUBCFG
+
+    chmod 0444 $GRUBCFG
+fi
+grub-install /dev/${device}
+echo "(hd0) /dev/${device}" > /boot/grub/device.map
+
+# If grub.cfg doesn't exist, assume GRUB 0.97 and create a menu.lst
+if [ ! -f /boot/grub/grub.cfg ] ; then
+    echo "Preparing custom grub menu..."
+    echo "default 0" > /boot/grub/menu.lst
+    echo "timeout 30" >> /boot/grub/menu.lst
+    echo "title Live Boot/Install-Image" >> /boot/grub/menu.lst
+    echo "root  (hd0,0)" >> /boot/grub/menu.lst
+    echo "kernel /vmlinuz root=$rootfs rw $3 $4 quiet" >> /boot/grub/menu.lst
+fi
+
+cp /run/media/$1/vmlinuz /boot/
+
+umount /boot
+
+sync
+
+echo "Remove your installation media, and press ENTER"
+
+read enter
+
+echo "Rebooting..."
+reboot -f