6 files changed, 265 insertions, 0 deletions

diff --git a/meta/recipes-connectivity/dhcp/files/default-relay b/meta/recipes-connectivity/dhcp/files/default-relay
new file mode 100644
index 0000000000..59249db283
--- /dev/null
+++ b/meta/recipes-connectivity/dhcp/files/default-relay
@@ -0,0 +1,12 @@
+# Defaults for dhcp-relay initscript
+# sourced by /etc/init.d/dhcp-relay
+
+# What servers should the DHCP relay forward requests to?
+# e.g: SERVERS="192.168.0.1"
+SERVERS=""
+
+# On what interfaces should the DHCP relay (dhrelay) serve DHCP requests?
+INTERFACES=""
+
+# Additional options that are passed to the DHCP relay daemon?
+OPTIONS=""
\ No newline at end of file
diff --git a/meta/recipes-connectivity/dhcp/files/default-server b/meta/recipes-connectivity/dhcp/files/default-server
new file mode 100644
index 0000000000..0385d16992
--- /dev/null
+++ b/meta/recipes-connectivity/dhcp/files/default-server
@@ -0,0 +1,7 @@
+# Defaults for dhcp initscript
+# sourced by /etc/init.d/dhcp-server
+# installed at /etc/default/dhcp-server by the maintainer scripts
+
+# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
+#       Separate multiple interfaces with spaces, e.g. "eth0 eth1".
+INTERFACES=""
diff --git a/meta/recipes-connectivity/dhcp/files/dhclient.conf b/meta/recipes-connectivity/dhcp/files/dhclient.conf
new file mode 100644
index 0000000000..0e6dcf96c2
--- /dev/null
+++ b/meta/recipes-connectivity/dhcp/files/dhclient.conf
@@ -0,0 +1,50 @@
+# Configuration file for /sbin/dhclient, which is included in Debian's
+#       dhcp3-client package.
+#
+# This is a sample configuration file for dhclient. See dhclient.conf's
+#       man page for more information about the syntax of this file
+#       and a more comprehensive list of the parameters understood by
+#       dhclient.
+#
+# Normally, if the DHCP server provides reasonable information and does
+#       not leave anything out (like the domain name, for example), then
+#       few changes must be made to this file, if any.
+#
+
+#send host-name "andare.fugue.com";
+#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
+#send dhcp-lease-time 3600;
+#supersede domain-name "fugue.com home.vix.com";
+#prepend domain-name-servers 127.0.0.1;
+request subnet-mask, broadcast-address, time-offset, routers,
+        domain-name, domain-name-servers, host-name,
+        netbios-name-servers, netbios-scope;
+#require subnet-mask, domain-name-servers;
+#timeout 60;
+#retry 60;
+#reboot 10;
+#select-timeout 5;
+#initial-interval 2;
+#script "/etc/dhcp3/dhclient-script";
+#media "-link0 -link1 -link2", "link0 link1";
+#reject 192.33.137.209;
+
+#alias {
+#  interface "eth0";
+#  fixed-address 192.5.5.213;
+#  option subnet-mask 255.255.255.255;
+#}
+
+#lease {
+#  interface "eth0";
+#  fixed-address 192.33.137.200;
+#  medium "link0 link1";
+#  option host-name "andare.swiftmedia.com";
+#  option subnet-mask 255.255.255.0;
+#  option broadcast-address 192.33.137.255;
+#  option routers 192.33.137.250;
+#  option domain-name-servers 127.0.0.1;
+#  renew 2 2000/1/12 00:00:01;
+#  rebind 2 2000/1/12 00:00:01;
+#  expire 2 2000/1/12 00:00:01;
+#}
diff --git a/meta/recipes-connectivity/dhcp/files/dhcpd.conf b/meta/recipes-connectivity/dhcp/files/dhcpd.conf
new file mode 100644
index 0000000000..0001c0f00e
--- /dev/null
+++ b/meta/recipes-connectivity/dhcp/files/dhcpd.conf
@@ -0,0 +1,108 @@
+#
+# Sample configuration file for ISC dhcpd for Debian
+#
+# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
+#
+
+# The ddns-updates-style parameter controls whether or not the server will
+# attempt to do a DNS update when a lease is confirmed. We default to the
+# behavior of the version 2 packages ('none', since DHCP v2 didn't
+# have support for DDNS.)
+ddns-update-style none;
+
+# option definitions common to all supported networks...
+option domain-name "example.org";
+option domain-name-servers ns1.example.org, ns2.example.org;
+
+default-lease-time 600;
+max-lease-time 7200;
+
+# If this DHCP server is the official DHCP server for the local
+# network, the authoritative directive should be uncommented.
+#authoritative;
+
+# Use this to send dhcp log messages to a different log file (you also
+# have to hack syslog.conf to complete the redirection).
+log-facility local7;
+
+# No service will be given on this subnet, but declaring it helps the 
+# DHCP server to understand the network topology.
+
+#subnet 10.152.187.0 netmask 255.255.255.0 {
+#}
+
+# This is a very basic subnet declaration.
+
+#subnet 10.254.239.0 netmask 255.255.255.224 {
+#  range 10.254.239.10 10.254.239.20;
+#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
+#}
+
+# This declaration allows BOOTP clients to get dynamic addresses,
+# which we don't really recommend.
+
+#subnet 10.254.239.32 netmask 255.255.255.224 {
+#  range dynamic-bootp 10.254.239.40 10.254.239.60;
+#  option broadcast-address 10.254.239.31;
+#  option routers rtr-239-32-1.example.org;
+#}
+
+# A slightly different configuration for an internal subnet.
+#subnet 10.5.5.0 netmask 255.255.255.224 {
+#  range 10.5.5.26 10.5.5.30;
+#  option domain-name-servers ns1.internal.example.org;
+#  option domain-name "internal.example.org";
+#  option routers 10.5.5.1;
+#  option broadcast-address 10.5.5.31;
+#  default-lease-time 600;
+#  max-lease-time 7200;
+#}
+
+# Hosts which require special configuration options can be listed in
+# host statements.   If no address is specified, the address will be
+# allocated dynamically (if possible), but the host-specific information
+# will still come from the host declaration.
+
+#host passacaglia {
+#  hardware ethernet 0:0:c0:5d:bd:95;
+#  filename "vmunix.passacaglia";
+#  server-name "toccata.fugue.com";
+#}
+
+# Fixed IP addresses can also be specified for hosts.   These addresses
+# should not also be listed as being available for dynamic assignment.
+# Hosts for which fixed IP addresses have been specified can boot using
+# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
+# be booted with DHCP, unless there is an address range on the subnet
+# to which a BOOTP client is connected which has the dynamic-bootp flag
+# set.
+#host fantasia {
+#  hardware ethernet 08:00:07:26:c0:a5;
+#  fixed-address fantasia.fugue.com;
+#}
+
+# You can declare a class of clients and then do address allocation
+# based on that.   The example below shows a case where all clients
+# in a certain class get addresses on the 10.17.224/24 subnet, and all
+# other clients get addresses on the 10.0.29/24 subnet.
+
+#class "foo" {
+#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
+#}
+
+#shared-network 224-29 {
+#  subnet 10.17.224.0 netmask 255.255.255.0 {
+#    option routers rtr-224.example.org;
+#  }
+#  subnet 10.0.29.0 netmask 255.255.255.0 {
+#    option routers rtr-29.example.org;
+#  }
+#  pool {
+#    allow members of "foo";
+#    range 10.17.224.10 10.17.224.250;
+#  }
+#  pool {
+#    deny members of "foo";
+#    range 10.0.29.10 10.0.29.230;
+#  }
+#}
diff --git a/meta/recipes-connectivity/dhcp/files/init-relay b/meta/recipes-connectivity/dhcp/files/init-relay
new file mode 100644
index 0000000000..019a7e84cf
--- /dev/null
+++ b/meta/recipes-connectivity/dhcp/files/init-relay
@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# $Id: dhcp3-relay,v 1.1 2004/04/16 15:41:08 ml Exp $
+#
+
+# It is not safe to start if we don't have a default configuration...
+if [ ! -f /etc/default/dhcp-relay ]; then
+        echo "/etc/default/dhcp-relay does not exist! - Aborting..."
+        echo "create this file to fix the problem."
+        exit 1
+fi
+
+# Read init script configuration (interfaces the daemon should listen on
+# and the DHCP server we should forward requests to.)
+. /etc/default/dhcp-relay
+
+# Build command line for interfaces (will be passed to dhrelay below.)
+IFCMD=""
+if test "$INTERFACES" != ""; then
+        for I in $INTERFACES; do
+                IFCMD=${IFCMD}"-i "${I}" "
+        done
+fi
+
+DHCRELAYPID=/var/run/dhcrelay.pid
+
+case "$1" in
+        start)
+                start-stop-daemon -S -x /usr/sbin/dhcrelay -- -q $OPTIONS $IFCMD $SERVERS
+                ;;
+        stop)
+                start-stop-daemon -K -x /usr/sbin/dhcrelay
+                ;;
+        restart | force-reload)
+                $0 stop
+                sleep 2
+                $0 start
+                ;;
+        *)
+                echo "Usage: /etc/init.d/dhcp-relay {start|stop|restart|force-reload}"
+                exit 1 
+esac
+
+exit 0
diff --git a/meta/recipes-connectivity/dhcp/files/init-server b/meta/recipes-connectivity/dhcp/files/init-server
new file mode 100644
index 0000000000..34c20852b9
--- /dev/null
+++ b/meta/recipes-connectivity/dhcp/files/init-server
@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# $Id: dhcp3-server.init.d,v 1.4 2003/07/13 19:12:41 mdz Exp $
+#
+
+test -f /usr/sbin/dhcpd || exit 0
+
+# It is not safe to start if we don't have a default configuration...
+if [ ! -f /etc/default/dhcp-server ]; then
+        echo "/etc/default/dhcp-server does not exist! - Aborting..."
+        exit 0
+fi
+
+# Read init script configuration (so far only interfaces the daemon
+# should listen on.)
+. /etc/default/dhcp-server
+
+case "$1" in
+        start)
+                echo -n "Starting DHCP server: "
+                test -d /var/lib/dhcp/ || mkdir -p /var/lib/dhcp/
+                test -f /var/lib/dhcp/dhcpd.leases || touch /var/lib/dhcp/dhcpd.leases  
+                start-stop-daemon -S -x /usr/sbin/dhcpd -- -q $INTERFACES
+                echo "."
+                ;;
+        stop)
+                echo -n "Stopping DHCP server: dhcpd3"
+                start-stop-daemon -K -x /usr/sbin/dhcpd
+                echo "."
+                ;;
+        restart | force-reload)
+                $0 stop
+                sleep 2
+                $0 start
+                if [ "$?" != "0" ]; then
+                        exit 1
+                fi
+                ;;
+        *)
+                echo "Usage: /etc/init.d/dhcp-server {start|stop|restart|force-reload}"
+                exit 1 
+esac
+
+exit 0