3 files changed, 201 insertions, 0 deletions

diff --git a/meta/conf/bblayers.conf.sample b/meta/conf/bblayers.conf.sample
new file mode 100644
index 0000000000..d361f244d9
--- /dev/null
+++ b/meta/conf/bblayers.conf.sample
@@ -0,0 +1,10 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "2"
+
+BBFILES ?= ""
+BBLAYERS = " \
+  ##POKYBASE##/meta \
+  ##POKYBASE##/meta-moblin \
+  ##POKYBASE##/meta-emenlow \
+  "
diff --git a/meta/conf/local.conf.sample b/meta/conf/local.conf.sample
new file mode 100644
index 0000000000..66acaa49a7
--- /dev/null
+++ b/meta/conf/local.conf.sample
@@ -0,0 +1,151 @@
+# CONF_VERSION is increased each time build/conf/ changes incompatibly
+CONF_VERSION = "1"
+
+# Uncomment and change to cache the files Poky downloads in an alternative
+# location, default it ${TOPDIR}/sources
+#DL_DIR ?= "${TOPDIR}/sources"
+# Uncomment and change to cache Poky's built staging output in an alternative
+# location, default ${TOPDIR}/pstage
+#PSTAGE_DIR ?= "${TOPDIR}/pstage"
+
+# Uncomment and set to allow bitbake to execute multiple tasks at once.
+# For a quadcore, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
+# be appropriate.
+# BB_NUMBER_THREADS = "4"
+# Also, make can be passed flags so it run parallel threads e.g.:
+# PARALLEL_MAKE = "-j 4"
+
+# The machine to target
+MACHINE ?= "qemux86"
+
+# Other supported machines
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "netbook"
+#MACHINE ?= "c7x0"
+#MACHINE ?= "akita"
+#MACHINE ?= "spitz"
+#MACHINE ?= "nokia770"
+#MACHINE ?= "nokia800"
+#MACHINE ?= "fic-gta01"
+#MACHINE ?= "bootcdx86"
+#MACHINE ?= "cm-x270"
+#MACHINE ?= "em-x270"
+#MACHINE ?= "htcuniversal"
+#MACHINE ?= "mx31ads"
+#MACHINE ?= "mx31litekit"
+#MACHINE ?= "mx31phy"
+#MACHINE ?= "zylonite"
+#MACHINE ?= "igep0020"
+#MACHINE ?= "igep0030"
+
+DISTRO ?= "poky"
+# For bleeding edge / experimental / unstable package versions
+# DISTRO ?= "poky-bleeding"
+
+BBMASK = ""
+
+# EXTRA_IMAGE_FEATURES allows extra packages to be added to the generated images 
+# (Some of these are automatically added to certain image types)
+# "dbg-pkgs"     - add -dbg packages for all installed packages
+#                  (adds symbol information for debugging/profiling)
+# "dev-pkgs"     - add -dev packages for all installed packages
+#                  (useful if you want to develop against libs in the image)
+# "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug"    - add debugging tools (gdb, strace)
+# "tools-profile"  - add profiling tools (oprofile, exmap, lttng valgrind (x86 only))
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks"   - make an image for suitable of development
+#                    e.g. ssh root access has a blank password
+# There are other application targets too, see meta/classes/poky-image.bbclass 
+# and meta/packages/tasks/task-poky.bb for more details.
+
+EXTRA_IMAGE_FEATURES = "tools-debug tools-profile tools-testapps debug-tweaks"
+
+# The default IMAGE_FEATURES above are too large for the mx31phy and 
+# c700/c750 machines which have limited space. The code below limits
+# the default features for those machines.
+EXTRA_IMAGE_FEATURES_c7x0 = "tools-testapps debug-tweaks"
+EXTRA_IMAGE_FEATURES_mx31phy = "debug-tweaks"
+EXTRA_IMAGE_FEATURES_mx31ads = "tools-testapps debug-tweaks"
+
+# A list of packaging systems used in generated images
+# The first package type listed will be used for rootfs generation
+# include 'package_deb' for debs
+# include 'package_ipk' for ipks
+#PACKAGE_CLASSES ?= "package_deb package_ipk"
+PACKAGE_CLASSES ?= "package_ipk"
+
+# A list of additional classes to use when building the system
+# include 'image-prelink' in order to prelink the filesystem image
+USER_CLASSES ?= "image-prelink"
+
+# POKYMODE controls the characteristics of the generated packages/images by
+# telling poky which type of toolchain to use.
+#
+# Options include several different EABI combinations and a compatibility 
+# mode for the OABI mode poky previously used. 
+#
+# The default is "eabi"
+# Use "oabi" for machines with kernels < 2.6.18 on ARM for example.
+# Use "external-MODE" to use the precompiled external toolchains where MODE
+# is the type of external toolchain to use e.g. eabi.
+# POKYMODE = "external-eabi"
+
+# Uncomment this to specify where BitBake should create its temporary files.
+# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard
+# disk space, so make sure to free enough space. The default TMPDIR is
+# <build directory>/tmp
+#TMPDIR = "${POKYBASE}/build/tmp"
+
+
+# Uncomment this if you are using the Openedhand provided qemu deb - see README
+# ASSUME_PROVIDED += "qemu-native"
+
+# Comment this out if you don't have a 3.x gcc version available and wish
+# poky to build one for you. The 3.x gcc is required to build qemu-native.
+# ASSUME_PROVIDED += "gcc3-native"
+
+# Uncomment these two if you want BitBake to build images useful for debugging.
+# DEBUG_BUILD = "1"
+# INHIBIT_PACKAGE_STRIP = "1"
+
+# Uncomment these to build a package such that you can use gprof to profile it.
+# NOTE: This will only work with 'linux' targets, not
+# 'linux-uclibc', as uClibc doesn't provide the necessary
+# object files.  Also, don't build glibc itself with these
+# flags, or it'll fail to build.
+#
+# PROFILE_OPTIMIZATION = "-pg"
+# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
+# LDFLAGS =+ "-pg"
+
+# Uncomment this if you want BitBake to emit debugging output
+# BBDEBUG = "yes"
+# Uncomment this if you want BitBake to emit the log if a build fails.
+BBINCLUDELOGS = "yes"
+
+# Set this if you wish to make pkgconfig libraries from your system available 
+# for native builds. Combined with extra ASSUME_PROVIDEDs this can allow 
+# native builds of applications like oprofileui-native (unsupported feature).
+#EXTRA_NATIVE_PKGCONFIG_PATH = ":/usr/lib/pkgconfig"
+#ASSUME_PROVIDED += "gtk+-native libglade-native"
+
+ENABLE_BINARY_LOCALE_GENERATION = "1"
+
+# The architecture to build SDK items for, by setting this you can build SDK
+# packages for architectures other than the host i.e. building i586 packages
+# on an x86_64 host.
+# Supported values are i586 and x86_64
+#SDKMACHINE ?= "i586"
+
+# Poky can try and fetch packaged-staging packages from a http, https or ftp
+# mirror. Set this variable to the root of a pstage directory on a server.
+#PSTAGE_MIRROR ?= "http://someserver.tld/share/pstage"
+
+# Set IMAGETEST to qemu if you want to build testcases and start 
+# testing in qemu after do_rootfs.
+#IMAGETEST = "qemu"
+
+# By default testing will run the sanitytest suite. If you want to run other tests
+# (e.g. bat), list them here
+#TEST_SCEN = "sanitytest bat"
diff --git a/meta/conf/site.conf.sample b/meta/conf/site.conf.sample
new file mode 100644
index 0000000000..42042042f7
--- /dev/null
+++ b/meta/conf/site.conf.sample
@@ -0,0 +1,40 @@
+#
+# local.conf covers user settings, site.conf covers site specific information
+# such as proxy server addresses and optionally any shared download location
+#
+# SITE_CONF_VERSION is increased each time build/conf/site.conf
+# changes incompatibly
+SCONF_VERSION = "1"
+
+# Uncomment to cause CVS to use the proxy host specified
+#CVS_PROXY_HOST = "proxy.example.com"
+#CVS_PROXY_PORT = "81"
+
+# For svn, you need to create ~/.subversion/servers containing:
+#[global]
+#http-proxy-host = proxy.example.com
+#http-proxy-port = 81
+#
+
+# Uncomment to cause git to use the proxy host specificed 
+# although this only works for http
+#GIT_PROXY_HOST = "proxy.example.com"
+#GIT_PROXY_PORT = "81"
+#export GIT_PROXY_COMMAND = "${POKYBASE}/scripts/poky-git-proxy-command"
+
+# GIT_PROXY_IGNORE_* lines define hosts which do not require a proxy to access
+#GIT_CORE_CONFIG = "Yes"
+#GIT_PROXY_IGNORE_1 = "host.server.com"
+#GIT_PROXY_IGNORE_2 = "another.server.com"
+
+# If SOCKS is available run the following command to comple a simple transport
+# gcc scripts/poky-git-proxy-socks.c -o poky-git-proxy-socks
+# and then share that binary somewhere in PATH, then use the following settings
+#GIT_PROXY_HOST = "proxy.example.com"
+#GIT_PROXY_PORT = "81"
+#export GIT_PROXY_COMMAND = "${POKYBASE}/scripts/poky-git-proxy-socks-command"
+
+
+# Uncomment this to use a shared download directory
+#DL_DIR = "/some/shared/download/directory/"
+