20 files changed, 5 insertions, 162 deletions

diff --git a/meta/conf/machine/include/ixp4xx.conf b/meta/conf/machine/include/ixp4xx.conf
deleted file mode 100644
index 190ebe1c8c..0000000000
--- a/meta/conf/machine/include/ixp4xx.conf
+++ /dev/null
@@ -1,158 +0,0 @@
-#@TYPE: Machine configuration
-#@NAME: ixp4xx
-#@DESCRIPTION: genric machine configuration for ixp4xx platforms
-
-#-------------------------------------------------------------------------------
-# INPUTS
-#-------------------------------------------------------------------------------
-# conf/${DISTRO}.conf is included after this file and should be used to modify
-# variables identified as 'INPUTS' to the required values for the DISTRO, this
-# will cause the board specific settings (which depend for the most part on the
-# exact CPU used) to be set correctly within this file.  The results are the
-# variables identifies here as 'OUTPUTS'
-#
-#variable = "default"
-# <possible values>
-#    description
-
-ARCH_BYTE_SEX = "be"
-# "be" "le"
-#    The memory byte sex and (on correctly implemented hardware - the IXP4XX is
-#    correct) the byte sex of the buses within the system.  'be' (big-endian)
-#    means that the first byte is the most significant byte on a bus, 'le'
-#    (little-endian) means that the first byte is the least significant byte.
-
-ARM_INSTRUCTION_SET = "arm"
-# "arm" "thumb"
-#    The instruction set the compiler should use when generating application
-#    code.  The kernel is always compiled with arm code at present.  arm code
-#    is the original 32 bit ARM instruction set, thumb code is the 16 bit
-#    encoded RISC sub-set.  Thumb code is smaller (maybe 70% of the ARM size)
-#    but requires more instructions (140% for 70% smaller code) so may be
-#    slower.
-
-THUMB_INTERWORK = "yes"
-# "yes" "no"
-#    Whether to compile with code to allow interworking between the two
-#    instruction sets.  This allows thumb code to be executed on a primarily
-#    arm system and vice versa.  It is strongly recommended that DISTROs not
-#    turn this off - the actual cost is very small.
-
-DISTRO_BASE = ""
-# "" ":<base>"
-#    If given this must be the name of a 'distro' to add to the bitbake OVERRIDES
-#    after ${DISTRO}, this allows different distros to share a common base of
-#    overrides.  The value given must include a leading ':' or chaos will result.
-
-IXP4XX_SUFFIX = "${MACHINE_ARCH}"
-# <string>
-#    Kernel suffix - 'ixp4xxbe' or 'ixp4xxle' for a truely generic image, controls
-#    the suffix on the name of the generated zImage, override in the DISTRO
-#    configuration if patches or defconfig are changed for the DISTRO.
-
-#-------------------------------------------------------------------------------
-# OUTPUTS
-#-------------------------------------------------------------------------------
-
-#OVERRIDES
-#    The standard ':' separated list of overrides used by bitbake - see the
-#    basic setting in bitbake.conf.  This list is based on that used for the
-#    standard setting however :<base>, :thumb and :thumb-interwork will be
-#    inserted at appropriate points if a base distro, default use of thumb or
-#    arm/thumb interworking are enabled in the inputs.
-OVERRIDE_THUMB = "${@['', ':thumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
-OVERRIDE_INTERWORK = "${@['', ':thumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}"
-OVERRIDES = "local:${MACHINE}:ixp4xx:${DISTRO}${DISTRO_BASE}:${TARGET_OS}:${TARGET_ARCH}${OVERRIDE_THUMB}${OVERRIDE_INTERWORK}:build-${BUILD_OS}:fail-fast"
-
-# TARGET_CC_ARCH
-# TARGET_CC_KERNEL_ARCH
-# TARGET_LD_ARCH
-# TARGET_LD_KERNEL_ARCH
-#    Compiler and linker options for application code and kernel code.  These
-#    options ensure that the compiler has the correct settings for the selected
-#    instruction set and interworking.
-ARM_INTERWORK_M_OPT = "${@['-mno-thumb-interwork', '-mthumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}"
-ARM_THUMB_M_OPT = "${@['-mno-thumb', '-mthumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
-#
-TARGET_CC_ARCH = "-march=armv5te -mtune=xscale ${ARM_INTERWORK_M_OPT} ${ARM_THUMB_M_OPT}"
-TARGET_CC_KERNEL_ARCH = "-march=armv5te -mtune=xscale -mno-thumb-interwork -mno-thumb"
-TARGET_LD_ARCH = ""
-TARGET_LD_KERNEL_ARCH = ""
-
-# FULL_OPTIMIZATION
-#    Optimization settings.  Os works fine and is significantly better than O2.
-#    The other settings are somewhat arbitrary.  The optimisations chosen here
-#    include the ones which 'break' symbolic debugging (because the compiler does
-#    not include enough information to allow the debugger to know where given
-#    values are.)  The -fno options are an attempt to cancel explicit use of space
-#    consuming options found in some packages (this isn't a complete list, this is
-#    just the ones which package writers seem to know about and abuse).
-FULL_OPTIMIZATION = "-Os -fomit-frame-pointer -frename-registers \
-        -fno-unroll-loops -fno-inline-functions \
-        -fweb -funit-at-a-time"
-
-# TARGET_ARCH
-#    The correct setting for the system endianness (ARCH_BYTE_SEX).  This will
-#    be arm (le) or armeb (be) - it is difficult to be more precise in the
-#    setting because of the large number of ways it is used within OpenEmbedded.
-TARGET_ARCH = "${@['armeb', 'arm'][bb.data.getVar('ARCH_BYTE_SEX', d, 1) == 'le']}"
-
-# TARGET_PACKAGE_ARCH [not used]
-#    The correct setting for the generated packages.  This corresponds to the
-#    -march flag passed to the compiler because that limits the architectures
-#    on which the generated code will run.
-BYTE_SEX_CHAR = "${@['b', 'l'][bb.data.getVar('ARCH_BYTE_SEX', d, 1) == 'le']}"
-TARGET_PACKAGE_ARCH_BASE = "${@['armv5te', 'thumbv5t'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
-TARGET_PACKAGE_ARCH = "${TARGET_PACKAGE_ARCH_BASE}${BYTE_SEX_CHAR}"
-
-# MACHINE_ARCH
-#    The correct setting for packages which are specific to the machine, this
-#    defaults to ${MACHINE} in bitbake.conf, however it is set to ixp4xx here
-#    because everything built here is no more specific than that.
-MACHINE_ARCH = "ixp4xx${ARCH_BYTE_SEX}"
-
-# PACKAGE_EXTRA_ARCHS
-#    The full list of package architectures which should run on the system.
-#    This takes into account both the board level issues and the INPUTS set
-#    by the distro.  The arm list is derived from the architecture settings
-#    known to gcc, the thumb list is then derived from that (only the 't'
-#    architectures of course).
-#[not used]: TARGET_ARCH is handled below because it is also currently
-# used for thumb packages.
-#ARM_ARCHITECTURES = "${TARGET_ARCH} armv2${BYTE_SEX_CHAR} armv2a${BYTE_SEX_CHAR} armv3${BYTE_SEX_CHAR} armv3m${BYTE_SEX_CHAR} armv4${BYTE_SEX_CHAR} armv4t${BYTE_SEX_CHAR} armv5${BYTE_SEX_CHAR} armv5t${BYTE_SEX_CHAR} armv5e${BYTE_SEX_CHAR} armv5te${BYTE_SEX_CHAR} xscale${BYTE_SEX_CHAR}"
-ARM_ARCHITECTURES = "armv2${BYTE_SEX_CHAR} armv2a${BYTE_SEX_CHAR} armv3${BYTE_SEX_CHAR} armv3m${BYTE_SEX_CHAR} armv4${BYTE_SEX_CHAR} armv4t${BYTE_SEX_CHAR} armv5${BYTE_SEX_CHAR} armv5t${BYTE_SEX_CHAR} armv5e${BYTE_SEX_CHAR} armv5te${BYTE_SEX_CHAR} xscale${BYTE_SEX_CHAR}"
-THUMB_ARCHITECTURES = "thumbe${BYTE_SEX_CHAR} thumbv4t${BYTE_SEX_CHAR} thumbv5t${BYTE_SEX_CHAR}"
-
-#    NOTE: this list contains just the things which rootfs_ipk.bbclass does
-#    not add, rootfs_ipk.bbclass evaluates:
-#
-#        ipkgarchs="all any noarch ${TARGET_ARCH} ${PACKAGE_EXTRA_ARCHS} ${MACHINE}"
-#
-#    This is a priority ordered list - most desireable architecture at the end,
-#    so put <ARM_INSTRUCTION_SET>_ARCHITECTURES at the end and, if
-#    THUMB_INTERWORK precede this with the other architectures.
-PACKAGE_EXTRA_ARCHS = "ixp4xx ${MACHINE} \
-                ${@(lambda arch_thumb, arch_arm, is_arm, interwork: \
-                (interwork and (is_arm and arch_thumb or arch_arm) + ' ' or '') \
-                + '${TARGET_ARCH} ' + (is_arm and arch_arm or arch_thumb)) \
-               (bb.data.getVar('THUMB_ARCHITECTURES', d, 1), \
-                bb.data.getVar('ARM_ARCHITECTURES', d, 1), \
-                bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) != 'thumb', \
-                bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes')} \
-                ${MACHINE_ARCH} ${MACHINE}${ARCH_BYTE_SEX}"
-
-# IPKG_ARCH_LIST [not used]
-#    This is used to override the ipkgarchs settings in rootfs_ipk.bbclass, allowing
-#    the removal of the raw "${MACHINE}" from the end of the list.  ${MACHINE} and
-#    ixp4xx are included at the start (lower priority) as the non-byte-sex specific
-#    versions.
-IPKG_ARCH_LIST = "all any noarch ixp4xx ${MACHINE} ${PACKAGE_EXTRA_ARCHS}"
-
-#-------------------------------------------------------------------------------
-# Board defaults
-#-------------------------------------------------------------------------------
-# These values are board specific but they seem to be common to a large number
-# of boards so are reasonable defaults.
-SERIAL_CONSOLE = "115200 ttyS0"
-KERNEL_CONSOLE = "ttyS0,115200n8"
-USE_VT = "0"
diff --git a/meta/conf/machine/include/poodle-2.6.conf b/meta/conf/machine/include/poodle-2.6.conf
deleted file mode 100644
index 01a06b7c27..0000000000
--- a/meta/conf/machine/include/poodle-2.6.conf
+++ /dev/null
@@ -1 +0,0 @@
-require conf/machine/include/zaurus-2.6.conf
diff --git a/meta/conf/machine/include/poodle-2.6.inc b/meta/conf/machine/include/poodle-2.6.inc
new file mode 100644
index 0000000000..fa24a3281b
--- /dev/null
+++ b/meta/conf/machine/include/poodle-2.6.inc
@@ -0,0 +1 @@
+require conf/machine/include/zaurus-2.6.inc
diff --git a/meta/conf/machine/include/qemu.conf b/meta/conf/machine/include/qemu.inc
index 848709a5d5..848709a5d5 100644
--- a/meta/conf/machine/include/qemu.conf
+++ b/meta/conf/machine/include/qemu.inc
diff --git a/meta/conf/machine/include/tosa-2.6.conf b/meta/conf/machine/include/tosa-2.6.inc
index f3591b4b75..35dfb4d1b9 100644
--- a/meta/conf/machine/include/tosa-2.6.conf
+++ b/meta/conf/machine/include/tosa-2.6.inc
@@ -1,4 +1,4 @@
-include conf/machine/include/zaurus-2.6.conf
+include conf/machine/include/zaurus-2.6.inc
 # wlan-ng Modules
 MACHINE_EXTRA_RDEPENDS += "wlan-ng-modules-usb"
 
diff --git a/meta/conf/machine/include/tune-arm920t.conf b/meta/conf/machine/include/tune-arm920t.inc
index 373bf46727..373bf46727 100644
--- a/meta/conf/machine/include/tune-arm920t.conf
+++ b/meta/conf/machine/include/tune-arm920t.inc
diff --git a/meta/conf/machine/include/tune-arm926ejs.conf b/meta/conf/machine/include/tune-arm926ejs.inc
index 31fe8868ca..31fe8868ca 100644
--- a/meta/conf/machine/include/tune-arm926ejs.conf
+++ b/meta/conf/machine/include/tune-arm926ejs.inc
diff --git a/meta/conf/machine/include/tune-arm9tdmi.conf b/meta/conf/machine/include/tune-arm9tdmi.inc
index d097b07739..d097b07739 100644
--- a/meta/conf/machine/include/tune-arm9tdmi.conf
+++ b/meta/conf/machine/include/tune-arm9tdmi.inc
diff --git a/meta/conf/machine/include/tune-c3.conf b/meta/conf/machine/include/tune-c3.inc
index e6a522af10..e6a522af10 100644
--- a/meta/conf/machine/include/tune-c3.conf
+++ b/meta/conf/machine/include/tune-c3.inc
diff --git a/meta/conf/machine/include/tune-ep9312.conf b/meta/conf/machine/include/tune-ep9312.inc
index 0982cf2a13..0982cf2a13 100644
--- a/meta/conf/machine/include/tune-ep9312.conf
+++ b/meta/conf/machine/include/tune-ep9312.inc
diff --git a/meta/conf/machine/include/tune-iwmmxt.conf b/meta/conf/machine/include/tune-iwmmxt.inc
index 8376faca74..8376faca74 100644
--- a/meta/conf/machine/include/tune-iwmmxt.conf
+++ b/meta/conf/machine/include/tune-iwmmxt.inc
diff --git a/meta/conf/machine/include/tune-ppc603e.conf b/meta/conf/machine/include/tune-ppc603e.inc
index 7c8714cfc2..7c8714cfc2 100644
--- a/meta/conf/machine/include/tune-ppc603e.conf
+++ b/meta/conf/machine/include/tune-ppc603e.inc
diff --git a/meta/conf/machine/include/tune-ppce500.conf b/meta/conf/machine/include/tune-ppce500.inc
index 11717eba70..11717eba70 100644
--- a/meta/conf/machine/include/tune-ppce500.conf
+++ b/meta/conf/machine/include/tune-ppce500.inc
diff --git a/meta/conf/machine/include/tune-sh3.conf b/meta/conf/machine/include/tune-sh3.inc
index 192dd8fd22..192dd8fd22 100644
--- a/meta/conf/machine/include/tune-sh3.conf
+++ b/meta/conf/machine/include/tune-sh3.inc
diff --git a/meta/conf/machine/include/tune-sh4.conf b/meta/conf/machine/include/tune-sh4.inc
index 866f7f89d5..866f7f89d5 100644
--- a/meta/conf/machine/include/tune-sh4.conf
+++ b/meta/conf/machine/include/tune-sh4.inc
diff --git a/meta/conf/machine/include/tune-strongarm.conf b/meta/conf/machine/include/tune-strongarm.inc
index 8654c996ef..8654c996ef 100644
--- a/meta/conf/machine/include/tune-strongarm.conf
+++ b/meta/conf/machine/include/tune-strongarm.inc
diff --git a/meta/conf/machine/include/tune-supersparc.conf b/meta/conf/machine/include/tune-supersparc.inc
index 1b1ec1207f..1b1ec1207f 100644
--- a/meta/conf/machine/include/tune-supersparc.conf
+++ b/meta/conf/machine/include/tune-supersparc.inc
diff --git a/meta/conf/machine/include/tune-xscale.conf b/meta/conf/machine/include/tune-xscale.inc
index 0b98f09fc8..0b98f09fc8 100644
--- a/meta/conf/machine/include/tune-xscale.conf
+++ b/meta/conf/machine/include/tune-xscale.inc
diff --git a/meta/conf/machine/include/zaurus-2.6.conf b/meta/conf/machine/include/zaurus-2.6.inc
index 9eaa6bb2df..681d38770b 100644
--- a/meta/conf/machine/include/zaurus-2.6.conf
+++ b/meta/conf/machine/include/zaurus-2.6.inc
@@ -1,5 +1,5 @@
 # Zaurus Clamshell specific configuration for kernel 2.6
-# Don't forget to include zaurus-clamshell.conf as well
+# Don't forget to include zaurus-clamshell.inc as well
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-rp"
 PREFERRED_VERSION_wpa_supplicant = "0.4.7"
diff --git a/meta/conf/machine/include/zaurus-clamshell.conf b/meta/conf/machine/include/zaurus-clamshell.inc
index f585864c39..6c8bbfa5dd 100644
--- a/meta/conf/machine/include/zaurus-clamshell.conf
+++ b/meta/conf/machine/include/zaurus-clamshell.inc
@@ -24,6 +24,7 @@ GUI_MACHINE_CLASS = "bigscreen"
 GPE_EXTRA_INSTALL += "gaim sylpheed"
 
 # Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
-include conf/machine/include/tune-xscale.conf
+include conf/machine/include/tune-xscale.inc
 
 SERIAL_CONSOLE = "115200 ttyS0"
+