19 files changed, 110 insertions, 104 deletions

diff --git a/documentation/bsp-guide/bsp.xml b/documentation/bsp-guide/bsp.xml
index b52366adf4..5c6f9df7ab 100644
--- a/documentation/bsp-guide/bsp.xml
+++ b/documentation/bsp-guide/bsp.xml
@@ -1415,8 +1415,8 @@
                         Thus, the build system can build the corresponding recipe and include
                         the component in the image.
                         See the
-                        "<ulink url='&YOCTO_DOCS_GS_URL;#enabling-commercially-licensed-recipes'>Enabling Commercially Licensed Recipes</ulink>"
-                        section in the Yocto Project Overview Manual for details on how
+                        "<ulink url='&YOCTO_DOCS_CM_URL;#enabling-commercially-licensed-recipes'>Enabling Commercially Licensed Recipes</ulink>"
+                        section in the Yocto Project Concepts Manual for details on how
                         to use these variables.</para>
                         <para>If you build as you normally would, without
                         specifying any recipes in the
diff --git a/documentation/dev-manual/dev-manual-common-tasks.xml b/documentation/dev-manual/dev-manual-common-tasks.xml
index f420a14f5a..3ac223159b 100644
--- a/documentation/dev-manual/dev-manual-common-tasks.xml
+++ b/documentation/dev-manual/dev-manual-common-tasks.xml
@@ -1508,7 +1508,7 @@
                 <note>
                     For information on recipe syntax, see the
                     "<ulink url='&YOCTO_DOCS_GS_URL;#recipe-syntax'>Recipe Syntax</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    section in the Getting Started With Yocto Project Manual.
                 </note>
             </para>
 
@@ -1799,7 +1799,7 @@
             <para>
                 You can find more information about the build process in
                 "<ulink url='&YOCTO_DOCS_GS_URL;#overview-development-environment'>The Yocto Project Development Environment</ulink>"
-                chapter of the Yocto Project Overview Manual.
+                chapter of the Getting Started With Yocto Project Manual.
             </para>
         </section>
 
@@ -1816,7 +1816,7 @@
                 that points to where the source is located.
                 For a graphical representation of source locations, see the
                 "<ulink url='&YOCTO_DOCS_GS_URL;#sources-dev-environment'>Sources</ulink>"
-                section in the Yocto Project Overview Manual.
+                section in the Getting Started With Yocto Project Manual.
             </para>
 
             <para>
@@ -2128,8 +2128,8 @@
                         containing the current checksum.
                         For more explanation and examples of how to set the
                         <filename>LIC_FILES_CHKSUM</filename> variable, see the
-                        "<ulink url='&YOCTO_DOCS_GS_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
-                        section in the Yocto Project Overview Manual.</para>
+                        "<ulink url='&YOCTO_DOCS_CM_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
+                        section in the Yocto Project Concepts Manual.</para>
                         <para>To determine the correct checksum string, you
                         can list the appropriate files in the
                         <filename>LIC_FILES_CHKSUM</filename> variable with
@@ -2275,8 +2275,8 @@
                 automatically add a runtime dependency to "mypackage" on
                 "example").
                 See the
-                "<ulink url='&YOCTO_DOCS_GS_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
-                in the Yocto Project Overview Manual for further details.
+                "<ulink url='&YOCTO_DOCS_CM_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
+                in the Yocto Project Concepts Manual for further details.
             </para>
         </section>
 
@@ -3211,8 +3211,8 @@
                     The variable
                     <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-LIC_FILES_CHKSUM'>LIC_FILES_CHKSUM</ulink></filename>
                     is used to track source license changes as described in the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
+                    section in the Yocto Project Concepts Manual.
                     You can quickly create Autotool-based recipes in a manner similar to the previous example.
                 </para>
             </section>
@@ -3418,8 +3418,8 @@
                                 allows runtime dependencies between packages
                                 to be added automatically.
                                 See the
-                                "<ulink url='&YOCTO_DOCS_GS_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
-                                section in the Yocto Project Overview Manual
+                                "<ulink url='&YOCTO_DOCS_CM_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
+                                section in the Yocto Project Concepts Manual
                                 for more information.
                                 </para></listitem>
                         </itemizedlist>
@@ -4543,8 +4543,8 @@
             architectures.
             <note>
                 For more information on x32 psABI, see the
-                "<ulink url='&YOCTO_DOCS_GS_URL;#x32'>x32 psABI</ulink>"
-                section in the Yocto Project Overview Manual.
+                "<ulink url='&YOCTO_DOCS_CM_URL;#x32'>x32 psABI</ulink>"
+                section in the Yocto Project Concepts Manual.
             </note>
             To use the x32 psABI, you need to edit your
             <filename>conf/local.conf</filename> configuration file as
@@ -7347,7 +7347,7 @@ Some notes from Cal:
 
                 <para>
                     Because the OpenEmbedded build system uses
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#overview-checksums'>signatures</ulink>",
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#overview-checksums'>signatures</ulink>",
                     which are unique to a given build, the build system
                     knows when to rebuild packages.
                     All the inputs into a given task are represented by a
@@ -7451,8 +7451,8 @@ Some notes from Cal:
 
                     <para>
                         For more information on shared state, see the
-                        "<ulink url='&YOCTO_DOCS_GS_URL;#shared-state-cache'>Shared State Cache</ulink>"
-                        section in the Yocto Project Overview Manual.
+                        "<ulink url='&YOCTO_DOCS_CM_URL;#shared-state-cache'>Shared State Cache</ulink>"
+                        section in the Yocto Project Concepts Manual.
                     </para>
                 </note>
             </section>
@@ -11134,8 +11134,8 @@ Some notes from Cal:
                 considers it "out of date".
                 See the
                 "<ulink url='&YOCTO_DOCS_GS_URL;#stamp-files-and-the-rerunning-of-tasks'>Stamp Files and the Rerunning of Tasks</ulink>"
-                section in the Yocto Project Overview Manual for how BitBake
-                determines whether a task is "out of date".
+                section in the Getting Started With Yocto Project Manual for
+                how BitBake determines whether a task is "out of date".
             </para>
 
             <para>
diff --git a/documentation/dev-manual/dev-manual-newbie.xml b/documentation/dev-manual/dev-manual-newbie.xml
index acbdc280a4..68c8d9bbea 100644
--- a/documentation/dev-manual/dev-manual-newbie.xml
+++ b/documentation/dev-manual/dev-manual-newbie.xml
@@ -550,7 +550,7 @@
         You do this by pushing to a contribution repository that is upstream.
         See the
         "<ulink url='&YOCTO_DOCS_GS_URL;#workflows'>Workflows</ulink>"
-        section in the Yocto Project Overview Manual for additional
+        section in the Getting Started With Yocto Project Manual for additional
         concepts on working in the Yocto Project development environment.
     </para>
 
diff --git a/documentation/dev-manual/dev-manual-start.xml b/documentation/dev-manual/dev-manual-start.xml
index 356abdf0a8..f14a91f94b 100644
--- a/documentation/dev-manual/dev-manual-start.xml
+++ b/documentation/dev-manual/dev-manual-start.xml
@@ -261,12 +261,12 @@
                     For concepts and introductory information about Git as it
                     is used in the Yocto Project, see the
                     "<ulink url='&YOCTO_DOCS_GS_URL;#git'>Git</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    section in the Getting Started With Yocto Project Manual.
                     </para></listitem>
                 <listitem><para>
                     For concepts on Yocto Project source repositories, see the
                     "<ulink url='&YOCTO_DOCS_GS_URL;#yocto-project-repositories'>Yocto Project Source Repositories</ulink>"
-                    section in the Yocto Project Overview Manual."
+                    section in the Getting Started With Yocto Project Manual."
                     </para></listitem>
             </itemizedlist>
         </note>
@@ -742,7 +742,7 @@
         under <filename>tmp/deploy/images</filename>.
         For detailed information on the build process using BitBake, see the
         "<ulink url='&YOCTO_DOCS_GS_URL;#images-dev-environment'>Images</ulink>"
-        section in the Yocto Project Overview Manual.
+        section in the Getting Started With Yocto Project Manual.
     </para>
 
     <para>
diff --git a/documentation/getting-started/getting-started-development-environment.xml b/documentation/getting-started/getting-started-development-environment.xml
index 7d177cecca..03a807e4a5 100644
--- a/documentation/getting-started/getting-started-development-environment.xml
+++ b/documentation/getting-started/getting-started-development-environment.xml
@@ -2426,8 +2426,8 @@
             <note>
                 For more information on the cross-development toolchain
                 generation, see the
-                "<link linkend='cross-development-toolchain-generation'>Cross-Development Toolchain Generation</link>"
-                section.
+                "<ulink url='&YOCTO_DOCS_CM_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
+                section in the Yocto Project Concepts Manual.
                 For information on advantages gained when building a
                 cross-development toolchain using the
                 <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-populate_sdk'><filename>do_populate_sdk</filename></ulink>
@@ -2490,7 +2490,7 @@
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-STAMP'><filename>STAMP</filename></ulink>
                 variable, and the end of the name consists of the task's name
                 and current
-                <link linkend='overview-checksums'>input checksum</link>.
+                <ulink url='&YOCTO_DOCS_CM_URL;#overview-checksums'>input checksum</ulink>.
                 <note>
                     This naming scheme assumes that
                     <ulink url='&YOCTO_DOCS_BB_URL;#var-BB_SIGNATURE_HANDLER'><filename>BB_SIGNATURE_HANDLER</filename></ulink>
@@ -2792,8 +2792,8 @@
                 <listitem><para>
                     For background information on cross-development toolchains
                     in the Yocto Project development environment, see the
-                    "<link linkend='cross-development-toolchain-generation'>Cross-Development Toolchain Generation</link>"
-                    section.
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
+                    section in the Yocto Projects Concepts Manual.
                     </para></listitem>
                 <listitem><para>
                     For information on setting up a cross-development
diff --git a/documentation/getting-started/getting-started-intro.xml b/documentation/getting-started/getting-started-intro.xml
index 51a21b6e23..a523159fe2 100644
--- a/documentation/getting-started/getting-started-intro.xml
+++ b/documentation/getting-started/getting-started-intro.xml
@@ -4,12 +4,12 @@
 
 <chapter id='overview-manual-intro'>
 
-<title>The Yocto Project Overview Manual</title>
+<title>Getting Started with Yocto Project Manual</title>
     <section id='overview-welcome'>
         <title>Welcome</title>
 
         <para>
-            Welcome to the Yocto Project Overview Manual!
+            Welcome to the Getting Started With Yocto Project Manual!
             This manual introduces the Yocto Project by providing concepts,
             software overviews, best-known-methods (BKMs), and any other
             high-level introductory information suitable for a new Yocto
diff --git a/documentation/kernel-dev/kernel-dev-concepts-appx.xml b/documentation/kernel-dev/kernel-dev-concepts-appx.xml
index db692edfab..19e9fa994a 100644
--- a/documentation/kernel-dev/kernel-dev-concepts-appx.xml
+++ b/documentation/kernel-dev/kernel-dev-concepts-appx.xml
@@ -240,7 +240,8 @@
                         You can also get an introduction to Git as it
                         applies to the Yocto Project in the
                         "<ulink url='&YOCTO_DOCS_GS_URL;#git'>Git</ulink>"
-                        section in the Yocto Project Overview Manual.
+                        section in the Getting Started With Yocto Project
+                        Manual.
                         The latter reference provides an overview of
                         Git and presents a minimal set of Git commands
                         that allows you to be functional using Git.
diff --git a/documentation/ref-manual/faq.xml b/documentation/ref-manual/faq.xml
index ecc866cdb3..c0ec1a6fb9 100644
--- a/documentation/ref-manual/faq.xml
+++ b/documentation/ref-manual/faq.xml
@@ -418,7 +418,8 @@
             <para>
                 You can find more information on licensing in the
                 "<ulink url='&YOCTO_DOCS_GS_URL;#licensing'>Licensing</ulink>"
-                section in the Yocto Project Overview Manual and also in the
+                section in the Getting Started With Yocto Project Manual
+                and also in the
                 "<ulink url='&YOCTO_DOCS_DEV_URL;#maintaining-open-source-license-compliance-during-your-products-lifecycle'>Maintaining Open Source License Compliance During Your Product's Lifecycle</ulink>"
                 section in the Yocto Project Development Tasks Manual.
             </para>
diff --git a/documentation/ref-manual/ref-bitbake.xml b/documentation/ref-manual/ref-bitbake.xml
index e848de81b3..9e3e9cf35d 100644
--- a/documentation/ref-manual/ref-bitbake.xml
+++ b/documentation/ref-manual/ref-bitbake.xml
@@ -350,8 +350,8 @@
             checksums.
             For information on this process, see the
             <filename>BB_HASHBASE_WHITELIST</filename> example in the
-            "<ulink url='&YOCTO_DOCS_GS_URL;#overview-checksums'>Checksums (Signatures)</ulink>"
-            section in the Yocto Project Overview Manual.
+            "<ulink url='&YOCTO_DOCS_CM_URL;#overview-checksums'>Checksums (Signatures)</ulink>"
+            section in the Yocto Project Concepts Manual.
         </note>
     </section>
 
diff --git a/documentation/ref-manual/ref-classes.xml b/documentation/ref-manual/ref-classes.xml
index 39d740d7d4..ff13213fad 100644
--- a/documentation/ref-manual/ref-classes.xml
+++ b/documentation/ref-manual/ref-classes.xml
@@ -568,8 +568,8 @@
         provides support for the recipes that build the Canadian
         Cross-compilation tools for SDKs.
         See the
-        "<ulink url='&YOCTO_DOCS_GS_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
-        section in the Yocto Project Overview Manual for more discussion on
+        "<ulink url='&YOCTO_DOCS_CM_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
+        section in the Yocto Project Concepts Manual for more discussion on
         these cross-compilation tools.
     </para>
 </section>
@@ -582,8 +582,8 @@
         provides support for the recipes that build the cross-compilation
         tools used for building SDKs.
         See the
-        "<ulink url='&YOCTO_DOCS_GS_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
-        section in the Yocto Project Overview Manual for more discussion on
+        "<ulink url='&YOCTO_DOCS_CM_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
+        section in the Yocto Project Concepts Manual for more discussion on
         these cross-compilation tools.
     </para>
 </section>
@@ -1252,7 +1252,7 @@
         section in the Yocto Project Development Tasks Manual.
         For information on how images are created, see the
         "<ulink url='&YOCTO_DOCS_GS_URL;#images-dev-environment'>Images</ulink>"
-        section in the Yocto Project Overview Manual.
+        section in the Getting Started With Yocto Project Manual.
     </para>
 </section>
 
@@ -2722,8 +2722,8 @@ This check was removed for YP 2.3 release
     <para>
         For more information on the cross-development toolchain
         generation, see the
-        "<ulink url='&YOCTO_DOCS_GS_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
-        section in the Yocto Project Overview Manual.
+        "<ulink url='&YOCTO_DOCS_CM_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
+        section in the Yocto Project Concepts Manual.
         For information on advantages gained when building a
         cross-development toolchain using the
         <link linkend='ref-tasks-populate_sdk'><filename>do_populate_sdk</filename></link>
@@ -3021,7 +3021,7 @@ This check was removed for YP 2.3 release
     <para>
         For information on how root filesystem images are created, see the
         "<ulink url='&YOCTO_DOCS_GS_URL;#image-generation-dev-environment'>Image Generation</ulink>"
-        section in the Yocto Project Overview Manual.
+        section in the Getting Started With Yocto Project Manual.
     </para>
 </section>
 
@@ -3182,8 +3182,8 @@ This check was removed for YP 2.3 release
 
     <para>
         For more information on sstate, see the
-        "<ulink url='&YOCTO_DOCS_GS_URL;#shared-state-cache'>Shared State Cache</ulink>"
-        section in the Yocto Project Overview Manual.
+        "<ulink url='&YOCTO_DOCS_CM_URL;#shared-state-cache'>Shared State Cache</ulink>"
+        section in the Yocto Project Concepts Manual.
     </para>
 </section>
 
diff --git a/documentation/ref-manual/ref-images.xml b/documentation/ref-manual/ref-images.xml
index 58f33cda2a..8b7cee827a 100644
--- a/documentation/ref-manual/ref-images.xml
+++ b/documentation/ref-manual/ref-images.xml
@@ -151,8 +151,8 @@
                 This image provides the Wayland protocol libraries and the
                 reference Weston compositor.
                 For more information, see the
-                "<ulink url='&YOCTO_DOCS_GS_URL;#wayland'>Wayland</ulink>"
-                section in the Yocto Project Overview Manual.
+                "<ulink url='&YOCTO_DOCS_CM_URL;#wayland'>Wayland</ulink>"
+                section in the Yocto Project Concepts Manual.
                 </para></listitem>
             <listitem><para><filename>core-image-x11</filename>:
                 A very basic X11 image with a terminal.
diff --git a/documentation/ref-manual/ref-structure.xml b/documentation/ref-manual/ref-structure.xml
index 1dff8f81f9..1a409909bf 100644
--- a/documentation/ref-manual/ref-structure.xml
+++ b/documentation/ref-manual/ref-structure.xml
@@ -523,7 +523,7 @@
             "<ulink url='&YOCTO_DOCS_GS_URL;#images-dev-environment'>Images</ulink>"
             and
             "<ulink url='&YOCTO_DOCS_GS_URL;#sdk-dev-environment'>Application Development SDK</ulink>"
-            sections in the Yocto Project Overview Manual.
+            sections in the Getting Started With Yocto Project Manual.
         </para>
     </section>
 
@@ -697,7 +697,7 @@
             For information on how BitBake uses stamp files to determine if
             a task should be rerun, see the
             "<ulink url='&YOCTO_DOCS_GS_URL;#stamp-files-and-the-rerunning-of-tasks'>Stamp Files and the Rerunning of Tasks</ulink>"
-            section in the Yocto Project Overview Manual.
+            section in the Getting Started With Yocto Project Manual.
         </para>
     </section>
 
diff --git a/documentation/ref-manual/ref-system-requirements.xml b/documentation/ref-manual/ref-system-requirements.xml
index 593f2d3d15..fc61f02d39 100644
--- a/documentation/ref-manual/ref-system-requirements.xml
+++ b/documentation/ref-manual/ref-system-requirements.xml
@@ -22,7 +22,7 @@
         For introductory information on the Yocto Project, see the
         <ulink url='&YOCTO_HOME_URL;'>Yocto Project Website</ulink> and the
         "<ulink url='&YOCTO_DOCS_GS_URL;#overview-development-environment'>Yocto Project Development Environment</ulink>"
-        chapter in the Yocto Project Overview Manual.
+        chapter in the Getting Started With Yocto Project Manual.
     </para>
 
     <para>
diff --git a/documentation/ref-manual/ref-tasks.xml b/documentation/ref-manual/ref-tasks.xml
index 262dec8311..2afd9588b7 100644
--- a/documentation/ref-manual/ref-tasks.xml
+++ b/documentation/ref-manual/ref-tasks.xml
@@ -221,7 +221,7 @@
         <para>
             For more information on image creation, see the
             "<ulink url='&YOCTO_DOCS_GS_URL;#image-generation-dev-environment'>Image Generation</ulink>"
-            section in the Yocto Project Overview Manual.
+            section in the Getting Started With Yocto Project Manual.
         </para>
     </section>
 
@@ -247,7 +247,7 @@
         <para>
             For more information on image creation, see the
             "<ulink url='&YOCTO_DOCS_GS_URL;#image-generation-dev-environment'>Image Generation</ulink>"
-            section in the Yocto Project Overview Manual.
+            section in the Getting Started With Yocto Project Manual.
         </para>
     </section>
 
@@ -342,8 +342,8 @@
             For additional information, see the
             <link linkend='var-PKGDESTWORK'><filename>PKGDESTWORK</filename></link>
             variable and the
-            "<ulink url='&YOCTO_DOCS_GS_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
-            section in the Yocto Project Overview Manual.
+            "<ulink url='&YOCTO_DOCS_CM_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
+            section in the Yocto Project Concepts Manual.
         </para>
     </section>
 
@@ -368,7 +368,7 @@
             directory in the package feeds area.
             For more information, see the
             "<ulink url='&YOCTO_DOCS_GS_URL;#package-feeds-dev-environment'>Package Feeds</ulink>"
-            section in the Yocto Project Overview Manual.
+            section in the Getting Started With Yocto Project Manual.
         </para>
     </section>
 
@@ -382,7 +382,7 @@
             directory in the package feeds area.
             For more information, see the
             "<ulink url='&YOCTO_DOCS_GS_URL;#package-feeds-dev-environment'>Package Feeds</ulink>"
-            section in the Yocto Project Overview Manual.
+            section in the Getting Started With Yocto Project Manual.
         </para>
     </section>
 
@@ -396,7 +396,7 @@
             directory in the package feeds area.
             For more information, see the
             "<ulink url='&YOCTO_DOCS_GS_URL;#package-feeds-dev-environment'>Package Feeds</ulink>"
-            section in the Yocto Project Overview Manual.
+            section in the Getting Started With Yocto Project Manual.
         </para>
     </section>
 
@@ -409,7 +409,7 @@
             directory in the package feeds area.
             For more information, see the
             "<ulink url='&YOCTO_DOCS_GS_URL;#package-feeds-dev-environment'>Package Feeds</ulink>"
-            section Yocto Project Overview Manual.
+            section Getting Started With Yocto Project Manual.
         </para>
     </section>
 
@@ -432,7 +432,8 @@
             Locates patch files and applies them to the source code.
             See the
             "<ulink url='&YOCTO_DOCS_GS_URL;#patching-dev-environment'>Patching</ulink>"
-            section in the Yocto Project Overview Manual for more information.
+            section in the Getting Started With Yocto Project Manual for more
+            information.
         </para>
     </section>
 
@@ -452,7 +453,8 @@
             Creates the file and directory structure for an installable SDK.
             See the
             "<ulink url='&YOCTO_DOCS_GS_URL;#sdk-generation-dev-environment'>SDK Generation</ulink>"
-            section in the Yocto Project Overview Manual for more information.
+            section in the Getting Started With Yocto Project Manual for more
+            information.
         </para>
     </section>
 
@@ -539,8 +541,8 @@
             plays a role in where unpacked source files ultimately reside.
             For more information on how source files are unpacked, see the
             "<ulink url='&YOCTO_DOCS_GS_URL;#source-fetching-dev-environment'>Source Fetching</ulink>"
-            section in the Yocto Project Overview Manual and also see the
-            <filename>WORKDIR</filename> and
+            section in the Getting Started With Yocto Project Manual and also
+            see the <filename>WORKDIR</filename> and
             <filename>S</filename> variable descriptions.
         </para>
     </section>
@@ -813,8 +815,8 @@
             image.
             See the
             "<ulink url='&YOCTO_DOCS_GS_URL;#image-generation-dev-environment'>Image Generation</ulink>"
-            section in the Yocto Project Overview Manual for more information
-            on how the root filesystem is created.
+            section in the Getting Started With Yocto Project Manual for more
+            information on how the root filesystem is created.
         </para>
     </section>
 
diff --git a/documentation/ref-manual/ref-terms.xml b/documentation/ref-manual/ref-terms.xml
index 9e38e98693..72e2ad926b 100644
--- a/documentation/ref-manual/ref-terms.xml
+++ b/documentation/ref-manual/ref-terms.xml
@@ -181,8 +181,8 @@
                 <para>Creation of these toolchains is simple and automated.
                 For information on toolchain concepts as they apply to the
                 Yocto Project, see the
-                "<ulink url='&YOCTO_DOCS_GS_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
-                section in the Yocto Project Overview Manual.
+                "<ulink url='&YOCTO_DOCS_CM_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
+                section in the Yocto Project Concepts Manual.
                 You can also find more information on using the
                 relocatable toolchain in the
                 <ulink url='&YOCTO_DOCS_SDK_URL;'>Yocto Project Application Development and the Extensible Software Development Kit (eSDK)</ulink>
@@ -400,7 +400,7 @@
                 <para>For more information on concepts related to Git
                 repositories, branches, and tags, see the
                 "<ulink url='&YOCTO_DOCS_GS_URL;#repositories-tags-and-branches'>Repositories, Tags, and Branches</ulink>"
-                section in the Yocto Project Overview Manual.
+                section in the Getting Started With Yocto Project Manual.
                 </para></listitem>
             <listitem><para><emphasis>Task:</emphasis>
                 A unit of execution for BitBake (e.g.
diff --git a/documentation/ref-manual/ref-variables.xml b/documentation/ref-manual/ref-variables.xml
index f09e0b6ae4..68b2daaa1e 100644
--- a/documentation/ref-manual/ref-variables.xml
+++ b/documentation/ref-manual/ref-variables.xml
@@ -3264,8 +3264,8 @@
                                 add any runtime dependencies between the
                                 packages produced by the two recipes.
                                 However, as explained in the
-                                "<ulink url='&YOCTO_DOCS_GS_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
-                                section in the Yocto Project Overview Manual,
+                                "<ulink url='&YOCTO_DOCS_CM_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
+                                section in the Yocto Project Concepts Manual,
                                 runtime dependencies will often be
                                 added automatically, meaning
                                 <filename>DEPENDS</filename> alone is
@@ -3334,7 +3334,8 @@
                     "<ulink url='&YOCTO_DOCS_GS_URL;#package-feeds-dev-environment'>Package Feeds</ulink>"
                     section, and the
                     "<ulink url='&YOCTO_DOCS_GS_URL;#sdk-dev-environment'>Application Development SDK</ulink>"
-                    sections all in the Yocto Project Overview Manual.
+                    sections all in the Getting Started With Yocto Project
+                    Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -3374,7 +3375,7 @@
                     task writes Debian packages into the appropriate folder.
                     For more information on how packaging works, see the
                     "<ulink url='&YOCTO_DOCS_GS_URL;#package-feeds-dev-environment'>Package Feeds</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    section in the Getting Started With Yocto Project Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -3406,7 +3407,8 @@
                     "<ulink url='&YOCTO_DOCS_GS_URL;#images-dev-environment'>Images</ulink>"
                     and
                     "<ulink url='&YOCTO_DOCS_GS_URL;#sdk-dev-environment'>Application Development SDK</ulink>"
-                    sections both in the Yocto Project Overview Manual.
+                    sections both in the Getting Started With Yocto Project
+                    Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -3445,7 +3447,7 @@
                     task writes IPK packages into the appropriate folder.
                     For more information on how packaging works, see the
                     "<ulink url='&YOCTO_DOCS_GS_URL;#package-feeds-dev-environment'>Package Feeds</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    section in the Getting Started With Yocto Project Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -3523,7 +3525,7 @@
                     task writes TAR packages into the appropriate folder.
                     For more information on how packaging works, see the
                     "<ulink url='&YOCTO_DOCS_GS_URL;#package-feeds-dev-environment'>Package Feeds</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    section in the Getting Started With Yocto Project Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -6085,7 +6087,7 @@
                     You can find information on how the image
                     is created in the
                     "<ulink url='&YOCTO_DOCS_GS_URL;#image-generation-dev-environment'>Image Generation</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    section in the Getting Started With Yocto Project Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -7911,8 +7913,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     <link linkend='var-LICENSE'><filename>LICENSE</filename></link>
                     is set to "CLOSED").</para>
                 <para>For more information, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
+                    section in the Yocto Project Concepts Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -8047,8 +8049,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     require additional licenses in order to be used in a
                     commercial product.
                     For more information, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#enabling-commercially-licensed-recipes'>Enabling Commercially Licensed Recipes</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#enabling-commercially-licensed-recipes'>Enabling Commercially Licensed Recipes</ulink>"
+                    section in the Yocto Project Concepts Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -8067,8 +8069,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     This practice is otherwise known as "whitelisting"
                     license flags.
                     For more information, see the
-                    <ulink url='&YOCTO_DOCS_GS_URL;#enabling-commercially-licensed-recipes'>Enabling Commercially Licensed Recipes</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    <ulink url='&YOCTO_DOCS_CM_URL;#enabling-commercially-licensed-recipes'>Enabling Commercially Licensed Recipes</ulink>"
+                    section in the Yocto Project Concepts Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -10412,8 +10414,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
      ${STAGING_DIR_HOST}/pkgdata
                     </literallayout>
                     For examples of how this data is used, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
-                    section in the Yocto Project Overview Manual and the
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
+                    section in the Yocto Project Concepts Manual and the
                     "<ulink url='&YOCTO_DOCS_DEV_URL;#viewing-package-information-with-oe-pkgdata-util'>Viewing Package Information with <filename>oe-pkgdata-util</filename></ulink>"
                     section in the Yocto Project Development Tasks Manual.
                 </para>
@@ -10659,7 +10661,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                         <filename>PR</filename> to know when to rebuild a
                         recipe.
                         The build system uses the task
-                        <ulink url='&YOCTO_DOCS_GS_URL;#overview-checksums'>input checksums</ulink>
+                        <ulink url='&YOCTO_DOCS_CM_URL;#overview-checksums'>input checksums</ulink>
                         along with the
                         <link linkend='structure-build-tmp-stamps'>stamp</link>
                         and
@@ -10715,8 +10717,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
      PREFERRED_PROVIDER_virtual/libgl ?= "mesa"
                     </literallayout>
                     For more information, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#metadata-virtual-providers'>Metadata (Virtual Providers)</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#metadata-virtual-providers'>Metadata (Virtual Providers)</ulink>"
+                    section in the Yocto Project Concepts Manual.
                     <note>
                         If you set <filename>PREFERRED_PROVIDER</filename>
                         for a <filename>virtual/*</filename> item, then any
@@ -10919,8 +10921,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
 
                 <para>
                     For more information, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
+                    section in the Yocto Project Concepts Manual.
                 </para>
             </glossdef>
         </glossentry>
@@ -11236,8 +11238,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     Therefore, most recipes do not need to set
                     <filename>RDEPENDS</filename>.
                     For more information, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
+                    section in the Yocto Project Concepts Manual.
                 </para>
 
                 <para>
@@ -13696,7 +13698,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     For information on how BitBake uses stamp files to determine
                     if a task should be rerun, see the
                     "<ulink url='&YOCTO_DOCS_GS_URL;#stamp-files-and-the-rerunning-of-tasks'>Stamp Files and the Rerunning of Tasks</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    section in the Getting Started With Yocto Project Manual.
                 </para>
 
                 <para>
@@ -15187,8 +15189,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                 <para>
                     For background information on cross-development toolchains
                     in the Yocto Project development environment, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
+                    section in the Yocto Project Concepts Manual.
                     For information on setting up a cross-development
                     environment, see the
                     <ulink url='&YOCTO_DOCS_SDK_URL;'>Yocto Project Application Development and the Extensible Software Development Kit (eSDK)</ulink>
@@ -15246,8 +15248,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                 <para>
                     For background information on cross-development toolchains
                     in the Yocto Project development environment, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
-                    section in the Yocto Project Overview Manual.
+                    "<ulink url='&YOCTO_DOCS_CM_URL;#cross-development-toolchain-generation'>Cross-Development Toolchain Generation</ulink>"
+                    section in the Yocto Project Concepts Manual.
                     For information on setting up a cross-development
                     environment, see the
                     <ulink url='&YOCTO_DOCS_SDK_URL;'>Yocto Project Application Development and the Extensible Software Development Kit (eSDK)</ulink>
diff --git a/documentation/ref-manual/resources.xml b/documentation/ref-manual/resources.xml
index 09feddd29f..31f513656f 100644
--- a/documentation/ref-manual/resources.xml
+++ b/documentation/ref-manual/resources.xml
@@ -167,10 +167,10 @@
                 </para></listitem>
             <listitem><para>
                 <emphasis>
-                <ulink url='&YOCTO_DOCS_GS_URL;'>Yocto Project Overview Manual</ulink>:
+                <ulink url='&YOCTO_DOCS_GS_URL;'>Getting Started With Yocto Project Manual</ulink>:
                 </emphasis>
-                This manual introduces the Yocto Project, provides development
-                environment basics, and explains Yocto Project concepts.
+                This manual introduces the Yocto Project and provides
+                development environment basics.
                 </para></listitem>
             <listitem><para>
                 <emphasis>
diff --git a/documentation/tools/mega-manual.sed b/documentation/tools/mega-manual.sed
index a34ff97d5e..ed68b5b2ae 100644
--- a/documentation/tools/mega-manual.sed
+++ b/documentation/tools/mega-manual.sed
@@ -25,7 +25,7 @@ s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.5\/toaster-manual\/toa
 # Process cases where just an external manual is referenced without an id anchor
 s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.5\/yocto-project-qs\/yocto-project-qs.html\" target=\"_top\">Yocto Project Quick Start<\/a>/Yocto Project Quick Start/g
 s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.5\/dev-manual\/dev-manual.html\" target=\"_top\">Yocto Project Development Tasks Manual<\/a>/Yocto Project Development Tasks Manual/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.5\/getting-started\/getting-started.html\" target=\"_top\">Yocto Project Overview Manual<\/a>/Yocto Project Overview Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.5\/getting-started\/getting-started.html\" target=\"_top\">Getting Started With Yocto Project Manual<\/a>/Getting Started With Yocto Project Manual/g
 s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.5\/sdk-manual\/sdk-manual.html\" target=\"_top\">Yocto Project Application Development and the Extensible Software Development Kit (eSDK)<\/a>/Yocto Project Application Development and the Extensible Software Development Kit (eSDK)/g
 s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.5\/bsp-guide\/bsp-guide.html\" target=\"_top\">Yocto Project Board Support Package (BSP) Developer's Guide<\/a>/Yocto Project Board Support Package (BSP) Developer's Guide/g
 s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.5\/profile-manual\/profile-manual.html\" target=\"_top\">Yocto Project Profiling and Tracing Manual<\/a>/Yocto Project Profiling and Tracing Manual/g
diff --git a/documentation/yocto-project-qs/qs.xml b/documentation/yocto-project-qs/qs.xml
index bd5941f03e..2032ab72cc 100644
--- a/documentation/yocto-project-qs/qs.xml
+++ b/documentation/yocto-project-qs/qs.xml
@@ -48,7 +48,7 @@
                     <listitem><para>
                         For more introductory and conceptual information on the
                         Yocto Project, see the
-                        <ulink url='&YOCTO_DOCS_GS_URL;'>Yocto Project Overview Manual</ulink>.
+                        <ulink url='&YOCTO_DOCS_GS_URL;'>Getting Started With Yocto Project Manual</ulink>.
                         </para></listitem>
                     <listitem><para>
                         For guidance on where to look for information beyond
@@ -603,8 +603,8 @@
                             </note>
                             For information on using the
                             <filename>bitbake</filename> command, see the
-                            "<ulink url='&YOCTO_DOCS_GS_URL;#usingpoky-components-bitbake'>BitBake</ulink>"
-                            section in the Yocto Project Overview Manual, or
+                            "<ulink url='&YOCTO_DOCS_CM_URL;#usingpoky-components-bitbake'>BitBake</ulink>"
+                            section in the Yocto Project Concepts Manual, or
                             see the
                             "<ulink url='&YOCTO_DOCS_BB_URL;#bitbake-user-manual-command'>BitBake Command</ulink>"
                             section in the BitBake User Manual.
@@ -1078,8 +1078,8 @@
                         used by the OpenEmbedded build system during the image
                         generation process.
                         For information on Fakeroot and Pseudo, see the
-                        "<ulink url='&YOCTO_DOCS_GS_URL;#fakeroot-and-pseudo'>Fakeroot and Pseudo</ulink>"
-                        section in the Yocto Project Overview Manual.
+                        "<ulink url='&YOCTO_DOCS_CM_URL;#fakeroot-and-pseudo'>Fakeroot and Pseudo</ulink>"
+                        section in the Yocto Project Concepts Manual.
                         </para></listitem>
                     <listitem><para role='writernotes'>
                         <emphasis>OPKG:</emphasis>