1 files changed, 169 insertions, 169 deletions

diff --git a/documentation/yocto-project-qs/yocto-project-qs.xml b/documentation/yocto-project-qs/yocto-project-qs.xml
index b1e5df0ecd..f36e7738b7 100644
--- a/documentation/yocto-project-qs/yocto-project-qs.xml
+++ b/documentation/yocto-project-qs/yocto-project-qs.xml
@@ -1,5 +1,5 @@
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" 
-"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" 
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
 [<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
 
 <article id='intro'>
@@ -13,7 +13,7 @@
 <section id='welcome'>
     <title>Welcome!</title>
     <para>
-        Welcome to the Yocto Project!  
+        Welcome to the Yocto Project!
         The Yocto Project is an open-source collaboration project focused on embedded Linux
         developers.
         Among other things, the Yocto Project uses a build system based on the Poky project
@@ -22,27 +22,27 @@
     </para>
 
     <para>
-        If you don't have a system that runs Linux and you want to give the Yocto Project a test run, 
+        If you don't have a system that runs Linux and you want to give the Yocto Project a test run,
         you might consider using the Yocto Project Build Appliance.
-        The Build Appliance allows you to build and boot a custom embedded Linux image with the Yocto 
-        Project using a non-Linux development system.  
-        See the <ulink url='http://www.yoctoproject.org/documentation/build-appliance'>Yocto 
+        The Build Appliance allows you to build and boot a custom embedded Linux image with the Yocto
+        Project using a non-Linux development system.
+        See the <ulink url='http://www.yoctoproject.org/documentation/build-appliance'>Yocto
         Project Build Appliance</ulink> for more information.
     </para>
 
     <para>
-        On the other hand, if you know all about open-source development, Linux development environments, 
+        On the other hand, if you know all about open-source development, Linux development environments,
         Git source repositories and the like and you just want some quick information that lets you try out
-        the Yocto Project on your Linux system, skip right to the 
+        the Yocto Project on your Linux system, skip right to the
         "<link linkend='super-user'>Super User</link>" section at the end of this quick start.
     </para>
 
     <para>
-        For the rest of you, this short document will give you some basic information about the environment and 
-        let you experience it in its simplest form.  
+        For the rest of you, this short document will give you some basic information about the environment and
+        let you experience it in its simplest form.
         After reading this document, you will have a basic understanding of what the Yocto Project is
-        and how to use some of its core components.  
-        This document steps you through a simple example showing you how to build a small image 
+        and how to use some of its core components.
+        This document steps you through a simple example showing you how to build a small image
         and run it using the Quick EMUlator (QEMU emulator).
     </para>
 
@@ -50,24 +50,24 @@
         For more detailed information on the Yocto Project, you should check out these resources:
         <itemizedlist>
             <listitem><para><emphasis>Website:</emphasis> The <ulink url='&YOCTO_HOME_URL;'>Yocto Project Website</ulink>
-                provides the latest builds, breaking news, full development documentation, and a rich Yocto 
+                provides the latest builds, breaking news, full development documentation, and a rich Yocto
                 Project Development Community into which you can tap.
                 </para></listitem>
             <listitem><para><emphasis>FAQs:</emphasis> Lists commonly asked Yocto Project questions and answers.
-                You can find two FAQs: <ulink url='&YOCTO_WIKI_URL;/wiki/FAQ'>Yocto Project FAQ</ulink> on 
-                a wiki, and the 
-                "<ulink url='&YOCTO_DOCS_REF_URL;#faq'>FAQ</ulink>" chapter in  
+                You can find two FAQs: <ulink url='&YOCTO_WIKI_URL;/wiki/FAQ'>Yocto Project FAQ</ulink> on
+                a wiki, and the
+                "<ulink url='&YOCTO_DOCS_REF_URL;#faq'>FAQ</ulink>" chapter in
                 the Yocto Project Reference Manual.
                 </para></listitem>
-            <listitem><para><emphasis>Developer Screencast:</emphasis> The 
+            <listitem><para><emphasis>Developer Screencast:</emphasis> The
                 <ulink url='http://vimeo.com/36450321'>Getting Started with the Yocto Project - New
-                Developer Screencast Tutorial</ulink> provides a 30-minute video for the user 
+                Developer Screencast Tutorial</ulink> provides a 30-minute video for the user
                 new to the Yocto Project but familiar with Linux build systems.</para></listitem>
         </itemizedlist>
     </para>
     <note>
         Due to production processes, there could be differences between the Yocto Project
-        documentation bundled in a released tarball and the 
+        documentation bundled in a released tarball and the
         <ulink url='&YOCTO_DOCS_QS_URL;'>Yocto Project Quick Start</ulink> on
         the <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink> website.
         For the latest version of this manual, see the manual on the website.
@@ -77,8 +77,8 @@
 <section id='yp-intro'>
     <title>Introducing the Yocto Project Development Environment</title>
     <para>
-        The Yocto Project through the OpenEmbedded build system provides an open source development 
-        environment targeting the ARM, MIPS, PowerPC and x86 architectures for a variety of 
+        The Yocto Project through the OpenEmbedded build system provides an open source development
+        environment targeting the ARM, MIPS, PowerPC and x86 architectures for a variety of
         platforms including x86-64 and emulated ones.
         You can use components from the Yocto Project to design, develop, build, debug, simulate,
         and test the complete software stack using Linux, the X Window System, GNOME Mobile-based
@@ -87,7 +87,7 @@
 
     <mediaobject>
         <imageobject>
-            <imagedata fileref="figures/yocto-environment.png" 
+            <imagedata fileref="figures/yocto-environment.png"
                 format="PNG" align='center' scalefit='1' width="100%"/>
         </imageobject>
         <caption>
@@ -111,7 +111,7 @@
             frameworks, these components need not be installed.</para>
         </listitem>
         <listitem>
-            <para>Creates a focused and stable core compatible with the OpenEmbedded 
+            <para>Creates a focused and stable core compatible with the OpenEmbedded
             project with which you can easily and reliably build and develop.</para>
         </listitem>
         <listitem>
@@ -121,20 +121,20 @@
     </itemizedlist>
 
     <para>
-        The Yocto Project can generate images for many kinds of devices.  
+        The Yocto Project can generate images for many kinds of devices.
         However, the standard example machines target QEMU full-system emulation for x86, x86-64, ARM, MIPS,
-        and PPC-based architectures as well as specific hardware such as the 
-        <trademark class='registered'>Intel</trademark> Desktop Board DH55TC.  
-        Because an image developed with the Yocto Project can boot inside a QEMU emulator, the 
+        and PPC-based architectures as well as specific hardware such as the
+        <trademark class='registered'>Intel</trademark> Desktop Board DH55TC.
+        Because an image developed with the Yocto Project can boot inside a QEMU emulator, the
         development environment works nicely as a test platform for developing embedded software.
     </para>
 
     <para>
-        Another important Yocto Project feature is the Sato reference User Interface. 
+        Another important Yocto Project feature is the Sato reference User Interface.
         This optional GNOME mobile-based UI, which is intended for devices with
-        restricted screen sizes, sits neatly on top of a device using the 
-        GNOME Mobile Stack and provides a well-defined user experience. 
-        Implemented in its own layer, it makes it clear to developers how they can implement 
+        restricted screen sizes, sits neatly on top of a device using the
+        GNOME Mobile Stack and provides a well-defined user experience.
+        Implemented in its own layer, it makes it clear to developers how they can implement
         their own user interface on top of a Linux image created with the Yocto Project.
     </para>
 </section>
@@ -150,7 +150,7 @@
         <listitem>
             <para>A host system running a supported Linux distribution (i.e. recent releases of
                 Fedora, openSUSE, CentOS, and Ubuntu).
-                If the host system supports multiple cores and threads, you can configure the 
+                If the host system supports multiple cores and threads, you can configure the
                 Yocto Project build system to decrease the time needed to build images
                 significantly.
             </para>
@@ -167,9 +167,9 @@
         <title>The Linux Distribution</title>
 
         <para>
-            The Yocto Project team is continually verifying more and more Linux 
+            The Yocto Project team is continually verifying more and more Linux
             distributions with each release.
-            In general, if you have the current release minus one of the following 
+            In general, if you have the current release minus one of the following
             distributions you should have no problems.
             <itemizedlist>
                 <listitem><para>Ubuntu</para></listitem>
@@ -177,8 +177,8 @@
                 <listitem><para>openSUSE</para></listitem>
                 <listitem><para>CentOS</para></listitem>
             </itemizedlist>
-            For a more detailed list of distributions that support the Yocto Project, 
-            see the 
+            For a more detailed list of distributions that support the Yocto Project,
+            see the
             "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>" section
             in the Yocto Project Reference Manual.
             <note>
@@ -190,15 +190,15 @@
         <para>
             The OpenEmbedded build system should be able to run on any modern distribution with Python 2.6 or 2.7.
             Earlier releases of Python are known to not work and the system does not support Python 3 at this time.
-            This document assumes you are running one of the previously noted distributions on your Linux-based 
+            This document assumes you are running one of the previously noted distributions on your Linux-based
             host systems.
         </para>
         <note><para>
-            If you attempt to use a distribution not in the above list, you may or may not have success - you 
+            If you attempt to use a distribution not in the above list, you may or may not have success - you
             are venturing into untested territory.
-            Refer to  
-            <ulink url='&OE_HOME_URL;/index.php?title=OEandYourDistro'>OE and Your Distro</ulink> and 
-            <ulink url='&OE_HOME_URL;/index.php?title=Required_software'>Required Software</ulink> 
+            Refer to
+            <ulink url='&OE_HOME_URL;/index.php?title=OEandYourDistro'>OE and Your Distro</ulink> and
+            <ulink url='&OE_HOME_URL;/index.php?title=Required_software'>Required Software</ulink>
             for information for other distributions used with the OpenEmbedded project, which might be
             a starting point for exploration.
             If you go down this path, you should expect problems.
@@ -213,18 +213,18 @@
 
         <para>
             Packages and package installation vary depending on your development system
-            and on your intent. 
+            and on your intent.
             For example, if you want to build an image that can run
             on QEMU in graphical mode (a minimal, basic build
             requirement), then the number of packages is different than if you want to
             build an image on a headless system or build out the Yocto Project
-            documentation set. 
+            documentation set.
             Collectively, the number of required packages is large
             if you want to be able to cover all cases.
-            <note>In general, you need to have root access and then install the 
+            <note>In general, you need to have root access and then install the
                 required packages.
-                Thus, the commands in the following section may or may not work 
-                depending on whether or not your Linux distribution has 
+                Thus, the commands in the following section may or may not work
+                depending on whether or not your Linux distribution has
                 <filename>sudo</filename> installed.</note>
         </para>
 
@@ -234,9 +234,9 @@
             (e.g. essential plus graphics support).
         </para>
 
-        <para> 
-            For lists of required packages for other scenarios, see the 
-            "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>" 
+        <para>
+            For lists of required packages for other scenarios, see the
+            "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>"
             section in the Yocto Project Reference Manual.
         </para>
 
@@ -244,7 +244,7 @@
             <title>Ubuntu</title>
 
             <para>
-                The essential packages you need for a supported Ubuntu distribution 
+                The essential packages you need for a supported Ubuntu distribution
                 are shown in the following command:
                 <literallayout class='monospaced'>
      $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; libsdl1.2-dev xterm
@@ -256,7 +256,7 @@
             <title>Fedora</title>
 
             <para>
-                The essential packages you need for a supported Fedora distribution 
+                The essential packages you need for a supported Fedora distribution
                 are shown in the following command:
                 <literallayout class='monospaced'>
      $ sudo yum install &FEDORA_HOST_PACKAGES_ESSENTIAL; SDL-devel xterm
@@ -268,7 +268,7 @@
             <title>openSUSE</title>
 
             <para>
-                The essential packages you need for a supported openSUSE 
+                The essential packages you need for a supported openSUSE
                 distribution are shown in the following command:
                 <literallayout class='monospaced'>
      $ sudo zypper install &OPENSUSE_HOST_PACKAGES_ESSENTIAL; libSDL-devel xterm
@@ -280,14 +280,14 @@
             <title>CentOS</title>
 
             <para>
-                The essential packages you need for a supported CentOS 
+                The essential packages you need for a supported CentOS
                 distribution are shown in the following command:
                 <literallayout class='monospaced'>
      $ sudo yum -y install &CENTOS_HOST_PACKAGES_ESSENTIAL; SDL-devel xterm
                 </literallayout>
-                <note>Depending on the CentOS version you are using, other requirements 
-                    and dependencies might exist. 
-                    For details, you should look at the CentOS sections on the 
+                <note>Depending on the CentOS version you are using, other requirements
+                    and dependencies might exist.
+                    For details, you should look at the CentOS sections on the
                     <ulink url='https://wiki.yoctoproject.org/wiki/Poky/GettingStarted/Dependencies'>Poky/GettingStarted/Dependencies</ulink>
                     wiki page.</note>
             </para>
@@ -296,26 +296,26 @@
 
     <section id='releases'>
         <title>Yocto Project Release</title>
-            
+
         <para>
-            You can download the latest Yocto Project release by going to the 
+            You can download the latest Yocto Project release by going to the
             <ulink url="&YOCTO_HOME_URL;/download">Yocto Project Download page</ulink>.
             Just go to the page and click the "Yocto Downloads" link found in the "Download"
-            navigation pane to the right to view all available Yocto Project releases. 
-            Then, click the "Yocto Release" link for the release you want from the list to 
-            begin the download. 
+            navigation pane to the right to view all available Yocto Project releases.
+            Then, click the "Yocto Release" link for the release you want from the list to
+            begin the download.
             Nightly and developmental builds are also maintained at
-            <ulink url="&YOCTO_AB_NIGHTLY_URL;"></ulink>.  
+            <ulink url="&YOCTO_AB_NIGHTLY_URL;"></ulink>.
             However, for this document a released version of Yocto Project is used.
         </para>
 
         <para>
             You can also get the Yocto Project files you need by setting up (cloning in Git terms)
-            a local copy of the <filename>poky</filename> Git repository on your host development 
-            system. 
+            a local copy of the <filename>poky</filename> Git repository on your host development
+            system.
             Doing so allows you to contribute back to the Yocto Project project.
-            For information on how to get set up using this method, see the 
-            "<ulink url='&YOCTO_DOCS_DEV_URL;#local-yp-release'>Yocto 
+            For information on how to get set up using this method, see the
+            "<ulink url='&YOCTO_DOCS_DEV_URL;#local-yp-release'>Yocto
             Project Release</ulink>" item in the Yocto Project Development Manual.
         </para>
     </section>
@@ -325,7 +325,7 @@
     <title>A Quick Test Run</title>
 
     <para>
-        Now that you have your system requirements in order, you can give the Yocto Project a try.  
+        Now that you have your system requirements in order, you can give the Yocto Project a try.
         This section presents some steps that let you do the following:
     </para>
 
@@ -340,9 +340,9 @@
 
     <section id='building-image'>
         <title>Building an Image</title>
- 
+
         <para>
-            In the development environment you will need to build an image whenever you change hardware 
+            In the development environment you will need to build an image whenever you change hardware
             support, add or change system libraries, or add or change services that have dependencies.
         </para>
 
@@ -356,21 +356,21 @@
          </mediaobject>
 
          <para>
-             Use the following commands to build your image.  
-             The OpenEmbedded build process creates an entire Linux distribution, including the toolchain, 
+             Use the following commands to build your image.
+             The OpenEmbedded build process creates an entire Linux distribution, including the toolchain,
              from source.
          </para>
 
          <note><para>
              The build process using Sato currently consumes about 50GB of disk space.
-             To allow for variations in the build process and for future package expansion, we 
+             To allow for variations in the build process and for future package expansion, we
              recommend having at least 100GB of free disk space.
          </para></note>
 
          <note><para>
              By default, the build process searches for source code using a pre-determined order
              through a set of locations.
-             If you encounter problems with the build process finding and downloading source code, see the 
+             If you encounter problems with the build process finding and downloading source code, see the
              "<ulink url='&YOCTO_DOCS_REF_URL;#how-does-the-yocto-project-obtain-source-code-and-will-it-work-behind-my-firewall-or-proxy-server'>How does the OpenEmbedded build system obtain source code and will it work behind my
              firewall or proxy server?</ulink>" in the Yocto Project Reference Manual.
          </para></note>
@@ -399,11 +399,11 @@
              <listitem><para>In the previous example, the first command retrieves the Yocto Project
                  release tarball from the source repositories using the
                  <filename>wget</filename> command.
-                 Alternatively, you can go to the 
+                 Alternatively, you can go to the
                  <ulink url='&YOCTO_HOME_URL;/download'>Yocto Project website's Downloads page</ulink>
                  to retrieve the tarball.</para></listitem>
-             <listitem><para>The second command extracts the files from the tarball and places 
-                 them into a directory named <filename>&YOCTO_POKY;</filename> in the current 
+             <listitem><para>The second command extracts the files from the tarball and places
+                 them into a directory named <filename>&YOCTO_POKY;</filename> in the current
                  directory.</para></listitem>
              <listitem><para>The third and fourth commands change the working directory to the
                  <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>
@@ -411,67 +411,67 @@
                  <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'>environment setup script</ulink>.
                  Running this script defines OpenEmbedded build environment settings needed to
                  complete the build.
-                 The script also creates the 
+                 The script also creates the
                  <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
-                 which is <filename>build</filename> in this case and is located in the 
+                 which is <filename>build</filename> in this case and is located in the
                  Source Directory.
-                 After the script runs, your current working directory is set 
+                 After the script runs, your current working directory is set
                  to the Build Directory.
-                 Later, when the build completes, the Build Directory contains all the files 
+                 Later, when the build completes, the Build Directory contains all the files
                  created during the build.
                  </para></listitem>
          </itemizedlist>
          <para>
-             Take some time to examine your <filename>local.conf</filename> file 
+             Take some time to examine your <filename>local.conf</filename> file
              in your project's configuration directory, which is found in the Build Directory.
              The defaults in that file should work fine.
              However, there are some variables of interest at which you might look.
          </para>
 
-         <para>  
-             By default, the target architecture for the build is <filename>qemux86</filename>, 
+         <para>
+             By default, the target architecture for the build is <filename>qemux86</filename>,
              which produces an image that can be used in the QEMU emulator and is targeted at an
              <trademark class='registered'>Intel</trademark> 32-bit based architecture.
-             To change this default, edit the value of the <filename>MACHINE</filename> variable 
+             To change this default, edit the value of the <filename>MACHINE</filename> variable
              in the configuration file before launching the build.
          </para>
 
          <para>
-             Another couple of variables of interest are the 
-             <ulink url='&YOCTO_DOCS_REF_URL;#var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></ulink> and the 
+             Another couple of variables of interest are the
+             <ulink url='&YOCTO_DOCS_REF_URL;#var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></ulink> and the
              <ulink url='&YOCTO_DOCS_REF_URL;#var-PARALLEL_MAKE'><filename>PARALLEL_MAKE</filename></ulink> variables.
-             By default, these variables are commented out. 
+             By default, these variables are commented out.
              However, if you have a multi-core CPU you might want to uncomment
-             the lines and set both variables equal to twice the number of your 
+             the lines and set both variables equal to twice the number of your
              host's processor cores.
              Setting these variables can significantly shorten your build time.
          </para>
 
         <para>
-            Another consideration before you build is the package manager used when creating 
-            the image. 
+            Another consideration before you build is the package manager used when creating
+            the image.
             By default, the OpenEmbedded build system uses the RPM package manager.
-            You can control this configuration by using the 
-            <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_CLASSES'><filename>PACKAGE_CLASSES</filename></ulink></filename> variable.  
-             For additional package manager selection information, see 
-             "<ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-package'>Packaging - <filename>package*.bbclass</filename></ulink>" 
+            You can control this configuration by using the
+            <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_CLASSES'><filename>PACKAGE_CLASSES</filename></ulink></filename> variable.
+             For additional package manager selection information, see
+             "<ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-package'>Packaging - <filename>package*.bbclass</filename></ulink>"
              in the Yocto Project Reference Manual.
         </para>
 
          <para>
-             Continue with the following command to build an OS image for the target, which is 
+             Continue with the following command to build an OS image for the target, which is
              <filename>core-image-sato</filename> in this example.
-             For information on the <filename>-k</filename> option use the 
+             For information on the <filename>-k</filename> option use the
              <filename>bitbake --help</filename> command or see the
-             "<ulink url='&YOCTO_DOCS_REF_URL;#usingpoky-components-bitbake'>BitBake</ulink>" section in 
+             "<ulink url='&YOCTO_DOCS_REF_URL;#usingpoky-components-bitbake'>BitBake</ulink>" section in
              the Yocto Project Reference Manual.
              <literallayout class='monospaced'>
      $ bitbake -k core-image-sato
              </literallayout>
              <note><para>
-                 BitBake requires Python 2.6 or 2.7.  For more information on this requirement, 
-                 see the 
-                 <ulink url='&YOCTO_DOCS_REF_URL;#faq'>FAQ</ulink> in the Yocto Project Reference 
+                 BitBake requires Python 2.6 or 2.7.  For more information on this requirement,
+                 see the
+                 <ulink url='&YOCTO_DOCS_REF_URL;#faq'>FAQ</ulink> in the Yocto Project Reference
                  Manual.
              </para></note>
              The final command runs the image:
@@ -489,10 +489,10 @@
 
     <section id='using-pre-built'>
         <title>Using Pre-Built Binaries and QEMU</title>
- 
+
         <para>
-            If hardware, libraries and services are stable, you can get started by using a pre-built binary 
-            of the filesystem image, kernel, and toolchain and run it using the QEMU emulator.  
+            If hardware, libraries and services are stable, you can get started by using a pre-built binary
+            of the filesystem image, kernel, and toolchain and run it using the QEMU emulator.
             This scenario is useful for developing application software.
         </para>
 
@@ -511,8 +511,8 @@
 
         <itemizedlist>
             <listitem><para>Install the appropriate stand-alone toolchain tarball.</para></listitem>
-            <listitem><para>Download the pre-built image that will boot with QEMU.  
-                You need to be sure to get the QEMU image that matches your target machine’s 
+            <listitem><para>Download the pre-built image that will boot with QEMU.
+                You need to be sure to get the QEMU image that matches your target machine’s
                 architecture (e.g. x86, ARM, etc.).</para></listitem>
             <listitem><para>Download the filesystem image for your target machine's architecture.
                 </para></listitem>
@@ -523,15 +523,15 @@
         <section id='installing-the-toolchain'>
             <title>Installing the Toolchain</title>
             <para>
-                You can download a tarball installer, which includes the pre-built toolchain, the 
-                <filename>runqemu</filename> 
+                You can download a tarball installer, which includes the pre-built toolchain, the
+                <filename>runqemu</filename>
                 script, and support files from the appropriate directory under
-                <ulink url='&YOCTO_TOOLCHAIN_DL_URL;'></ulink>.  
-                Toolchains are available for 32-bit and 64-bit development systems from the 
-                <filename>i686</filename> and <filename>x86-64</filename> directories, respectively. 
+                <ulink url='&YOCTO_TOOLCHAIN_DL_URL;'></ulink>.
+                Toolchains are available for 32-bit and 64-bit development systems from the
+                <filename>i686</filename> and <filename>x86-64</filename> directories, respectively.
                 Each type of development system supports five target architectures.
-                The names of the tarball installer scripts are such that a string representing the 
-                host system appears first in the filename and then is immediately followed by a 
+                The names of the tarball installer scripts are such that a string representing the
+                host system appears first in the filename and then is immediately followed by a
                 string representing the target architecture.
             </para>
 
@@ -539,17 +539,17 @@
      poky-eglibc-&lt;<emphasis>host_system</emphasis>&gt;-&lt;<emphasis>arch</emphasis>&gt;-toolchain-gmae-&lt;<emphasis>release</emphasis>&gt;.sh
 
      Where:
-         &lt;<emphasis>host_system</emphasis>&gt; is a string representing your development system: 
+         &lt;<emphasis>host_system</emphasis>&gt; is a string representing your development system:
                 i686 or x86_64.
-       
-         &lt;<emphasis>arch</emphasis>&gt; is a string representing the target architecture: 
+
+         &lt;<emphasis>arch</emphasis>&gt; is a string representing the target architecture:
                 i586, x86_64, powerpc, mips, or arm.
-       
+
          &lt;<emphasis>release</emphasis>&gt; is the version of Yocto Project.
             </literallayout>
 
-            <para>       
-                For example, the following toolchain installer is for a 64-bit development 
+            <para>
+                For example, the following toolchain installer is for a 64-bit development
                 host system and a 32-bit target architecture:
             </para>
 
@@ -563,17 +563,17 @@
             </para>
 
             <para>
-                The following command shows how to run the installer given a toolchain tarball 
+                The following command shows how to run the installer given a toolchain tarball
                 for a 64-bit development host system and a 32-bit target architecture.
-                You must change the permissions on the toolchain 
+                You must change the permissions on the toolchain
                 installer script so that it is executable.
             </para>
 
             <para>
                 The example assumes the toolchain installer is located in <filename>~/Downloads/</filename>.
                 <note>
-                    If you do not have write permissions for the directory into which you are installing 
-                    the toolchain, the toolchain installer notifies you and exits.  
+                    If you do not have write permissions for the directory into which you are installing
+                    the toolchain, the toolchain installer notifies you and exits.
                     Be sure you have write permissions in the directory and run the installer again.
                 </note>
             </para>
@@ -585,39 +585,39 @@
             </para>
 
             <para>
-                For more information on how to install tarballs, see the 
-                "<ulink url='&YOCTO_DOCS_ADT_URL;#using-an-existing-toolchain-tarball'>Using a Cross-Toolchain Tarball</ulink>" and 
+                For more information on how to install tarballs, see the
+                "<ulink url='&YOCTO_DOCS_ADT_URL;#using-an-existing-toolchain-tarball'>Using a Cross-Toolchain Tarball</ulink>" and
                 "<ulink url='&YOCTO_DOCS_ADT_URL;#using-the-toolchain-from-within-the-build-tree'>Using BitBake and the Build Directory</ulink>" sections in the Yocto Project Application Developer's Guide.
             </para>
         </section>
 
         <section id='downloading-the-pre-built-linux-kernel'>
             <title>Downloading the Pre-Built Linux Kernel</title>
-      
+
             <para>
-                You can download the pre-built Linux kernel suitable for running in the QEMU emulator from 
+                You can download the pre-built Linux kernel suitable for running in the QEMU emulator from
                 <ulink url='&YOCTO_QEMU_DL_URL;'></ulink>.
                 Be sure to use the kernel that matches the architecture you want to simulate.
                 Download areas exist for the five supported machine architectures:
                 <filename>qemuarm</filename>, <filename>qemumips</filename>, <filename>qemuppc</filename>,
                 <filename>qemux86</filename>, and <filename>qemux86-64</filename>.
             </para>
-         
-            <para>  
+
+            <para>
                 Most kernel files have one of the following forms:
                 <literallayout class='monospaced'>
      *zImage-qemu&lt;<emphasis>arch</emphasis>&gt;.bin
      vmlinux-qemu&lt;<emphasis>arch</emphasis>&gt;.bin
 
      Where:
-         &lt;<emphasis>arch</emphasis>&gt; is a string representing the target architecture: 
+         &lt;<emphasis>arch</emphasis>&gt; is a string representing the target architecture:
                 x86, x86-64, ppc, mips, or arm.
                 </literallayout>
             </para>
 
             <para>
-                You can learn more about downloading a Yocto Project kernel in the 
-                "<ulink url='&YOCTO_DOCS_DEV_URL;#local-kernel-files'>Yocto Project Kernel</ulink>" 
+                You can learn more about downloading a Yocto Project kernel in the
+                "<ulink url='&YOCTO_DOCS_DEV_URL;#local-kernel-files'>Yocto Project Kernel</ulink>"
                 bulleted item in the Yocto Project Development Manual.
             </para>
         </section>
@@ -628,14 +628,14 @@
             <para>
                 You can also download the filesystem image suitable for your target architecture from
                 <ulink url='&YOCTO_QEMU_DL_URL;'></ulink>.
-                Again, be sure to use the filesystem that matches the architecture you want 
+                Again, be sure to use the filesystem that matches the architecture you want
                 to simulate.
             </para>
 
             <para>
-                The filesystem image has two tarball forms: <filename>ext3</filename> and 
+                The filesystem image has two tarball forms: <filename>ext3</filename> and
                 <filename>tar</filename>.
-                You must use the <filename>ext3</filename> form when booting an image using the 
+                You must use the <filename>ext3</filename> form when booting an image using the
                 QEMU emulator.
                 The <filename>tar</filename> form can be flattened out in your host development system
                 and used for build purposes with the Yocto Project.
@@ -650,7 +650,7 @@
                    "<ulink url='&YOCTO_DOCS_REF_URL;#ref-images'>Images</ulink>" chapter
                    in the Yocto Project Reference Manual.
 
-         &lt;<emphasis>arch</emphasis>&gt; is a string representing the target architecture: 
+         &lt;<emphasis>arch</emphasis>&gt; is a string representing the target architecture:
                 x86, x86-64, ppc, mips, or arm.
                 </literallayout>
             </para>
@@ -658,15 +658,15 @@
 
         <section id='setting-up-the-environment-and-starting-the-qemu-emulator'>
             <title>Setting Up the Environment and Starting the QEMU Emulator</title>
-           
+
             <para>
                 Before you start the QEMU emulator, you need to set up the emulation environment.
                 The following command form sets up the emulation environment.
                 <literallayout class='monospaced'>
-     $ source &YOCTO_ADTPATH_DIR;/environment-setup-&lt;<emphasis>arch</emphasis>&gt;-poky-linux-&lt;<emphasis>if</emphasis>&gt; 
+     $ source &YOCTO_ADTPATH_DIR;/environment-setup-&lt;<emphasis>arch</emphasis>&gt;-poky-linux-&lt;<emphasis>if</emphasis>&gt;
 
      Where:
-         &lt;<emphasis>arch</emphasis>&gt; is a string representing the target architecture: 
+         &lt;<emphasis>arch</emphasis>&gt; is a string representing the target architecture:
                 i586, x86_64, ppc603e, mips, or armv5te.
 
          &lt;<emphasis>if</emphasis>&gt; is a string representing an embedded application binary interface.
@@ -675,12 +675,12 @@
             </para>
 
             <para>
-                Finally, this command form invokes the QEMU emulator 
+                Finally, this command form invokes the QEMU emulator
                 <literallayout class='monospaced'>
      $ runqemu &lt;<emphasis>qemuarch</emphasis>&gt; &lt;<emphasis>kernel-image</emphasis>&gt; &lt;<emphasis>filesystem-image</emphasis>&gt;
 
      Where:
-         &lt;<emphasis>qemuarch</emphasis>&gt; is a string representing the target architecture: qemux86, qemux86-64, 
+         &lt;<emphasis>qemuarch</emphasis>&gt; is a string representing the target architecture: qemux86, qemux86-64,
                     qemuppc, qemumips, or qemuarm.
 
          &lt;<emphasis>kernel-image</emphasis>&gt; is the architecture-specific kernel image.
@@ -691,50 +691,50 @@
             </para>
 
             <para>
-                Continuing with the example, the following two commands setup the emulation 
+                Continuing with the example, the following two commands setup the emulation
                 environment and launch QEMU.
-                This example assumes the root filesystem (<filename>.ext3</filename> file) and 
-                the pre-built kernel image file both reside in your home directory. 
+                This example assumes the root filesystem (<filename>.ext3</filename> file) and
+                the pre-built kernel image file both reside in your home directory.
                 The kernel and filesystem are for a 32-bit target architecture.
                 <literallayout class='monospaced'>
      $ cd $HOME
-     $ source &YOCTO_ADTPATH_DIR;/environment-setup-i586-poky-linux 
+     $ source &YOCTO_ADTPATH_DIR;/environment-setup-i586-poky-linux
      $ runqemu qemux86 bzImage-qemux86.bin \
      core-image-sato-qemux86.ext3
                 </literallayout>
             </para>
 
             <para>
-                The environment in which QEMU launches varies depending on the filesystem image and on the 
-                target architecture.  
-                For example, if you source the environment for the ARM target 
-                architecture and then boot the minimal QEMU image, the emulator comes up in a new 
-                shell in command-line mode.  
+                The environment in which QEMU launches varies depending on the filesystem image and on the
+                target architecture.
+                For example, if you source the environment for the ARM target
+                architecture and then boot the minimal QEMU image, the emulator comes up in a new
+                shell in command-line mode.
                 However, if you boot the SDK image, QEMU comes up with a GUI.
-                <note>Booting the PPC image results in QEMU launching in the same shell in 
+                <note>Booting the PPC image results in QEMU launching in the same shell in
                 command-line mode.</note>
             </para>
-        </section>     
+        </section>
     </section>
 </section>
 
 <section id='super-user'>
-    <title>Super User 
+    <title>Super User
 </title>
 
     <para>
-        This section 
+        This section
         <footnote>
             <para>
-                Kudos and thanks to Robert P. J. Day of 
+                Kudos and thanks to Robert P. J. Day of
                 <ulink url='http://www.crashcourse.ca'>CrashCourse</ulink> for providing the basis
                 for this "expert" section with information from one of his
                 <ulink url='http://www.crashcourse.ca/wiki/index.php/Yocto_Project_Quick_Start'>wiki</ulink>
                 pages.
             </para>
         </footnote>
-        gives you a minimal description of how to use the Yocto Project to build images 
-        for a BeagleBoard xM starting from scratch. 
+        gives you a minimal description of how to use the Yocto Project to build images
+        for a BeagleBoard xM starting from scratch.
         The steps were performed on a 64-bit Ubuntu 10.04 system.
     </para>
 
@@ -745,7 +745,7 @@
             Set up your <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>
             one of two ways:
             <itemizedlist>
-                <listitem><para><emphasis>Tarball:</emphasis> 
+                <listitem><para><emphasis>Tarball:</emphasis>
                     Use if you want the latest stable release:
                     <literallayout class='monospaced'>
      $ wget &YOCTO_RELEASE_DL_URL;/&YOCTO_POKY_TARBALL;
@@ -765,7 +765,7 @@
         <title>Setting Up Your Host</title>
 
         <para>
-            You need some packages for everything to work. 
+            You need some packages for everything to work.
             Rather than duplicate them here, look at the "<link linkend='packages'>The Packages</link>"
             section earlier in this quick start.
         </para>
@@ -776,14 +776,14 @@
 
         <para>
             From the parent directory your
-            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>, 
-            initialize your environment and provide a meaningful 
+            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>,
+            initialize your environment and provide a meaningful
             <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
             name:
             <literallayout class='monospaced'>
      $ source poky/&OE_INIT_FILE; mybuilds
             </literallayout>
-            At this point, the <filename>mybuilds</filename> directory has been created for you 
+            At this point, the <filename>mybuilds</filename> directory has been created for you
             and it is now your current working directory.
             If you don't provide your own directory name it defaults to <filename>build</filename>,
             which is inside the Source Directory.
@@ -804,20 +804,20 @@
      PARALLEL_MAKE = "-j 8"
      MACHINE ?= "beagleboard"
             </literallayout>
-            Briefly, set <ulink url='&YOCTO_DOCS_REF_URL;#var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></ulink> 
+            Briefly, set <ulink url='&YOCTO_DOCS_REF_URL;#var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></ulink>
             and <ulink url='&YOCTO_DOCS_REF_URL;#var-PARALLEL_MAKE'><filename>PARALLEL_MAKE</filename></ulink> to
             twice your host processor's number of cores.
         </para>
 
         <para>
-            A good deal that goes into a Yocto Project build is simply downloading all of the source 
-            tarballs. 
-            Maybe you have been working with another build system (OpenEmbedded or Angstrom) for which 
+            A good deal that goes into a Yocto Project build is simply downloading all of the source
+            tarballs.
+            Maybe you have been working with another build system (OpenEmbedded or Angstrom) for which
             you've built up a sizable directory of source tarballs.
-            Or perhaps someone else has such a directory for which you have read access. 
+            Or perhaps someone else has such a directory for which you have read access.
             If so, you can save time by adding the <filename>PREMIRRORS</filename>
             statement to your configuration file so that the build process checks
-            local directories first for existing tarballs before checking the 
+            local directories first for existing tarballs before checking the
             Internet.
             Here is an efficient way to set it up in your <filename>local.conf</filename>
             file:
@@ -850,7 +850,7 @@
                     <literallayout class='monospaced'>
      $ bitbake -c fetchall core-image-minimal
                     </literallayout>
-                    This variation guarantees that you have all the sources for that BitBake target 
+                    This variation guarantees that you have all the sources for that BitBake target
                     should you disconnect from the net and want to do the build later offline.
                     </para></listitem>
                 <listitem><para>Specify to continue the build even if BitBake encounters an error.