pam: rename to libpam and add core config files

So far pam is not really functional as there no pam config files exists, here
we borrow from openembedded to setup core /etc/pam.d to make it functional:

  * change 'pam' to 'libpam' following Debian naming convention, and change
    (R)DEPENDS in other recipes

  * borrow openembedded libpam-base-files with changes:
    - rename to libpam-runtime to follow Debian naming
    - only keep common-* core files which can be traced back to Debian
      libpam-runtime-1.0.1 for license track. Other service specific files
      (such as atd, cron, ...) are removed because either they may contaminate
      the license or it's right thing to have their own packages providing them
    - use same libpam recipe instead of creating a new. This way other /etc/
      stuff are all contained by libpam-runtime

  * like openembedded, we package each pam plugin into seperate package now,
    with some differnce though:
    - Some ${sbindir} binaries are bound to specific PAM plugin. So better to
      package them together with corresponding plugin package
    - populate_sysroot_prepend is invoked before actual populate_sysroot, at
      that time ${D} binaries haven't been tripped. So it's difficult to specify
      -dev for those plugin pacakges from _prepend which are simply empty.
      actually one -dev/-doc per recipe is one good exercise here.

Signed-off-by: Kevin Tian <kevin.tian@intel.com>

12 files changed, 216 insertions, 6 deletions

diff --git a/meta/packages/libcap/libcap.inc b/meta/packages/libcap/libcap.inc
index 7bdecd78a3..16eaae690c 100644
--- a/meta/packages/libcap/libcap.inc
+++ b/meta/packages/libcap/libcap.inc
@@ -5,8 +5,7 @@ HOMEPAGE = "http://sites.google.com/site/fullycapable/"
 LICENSE = "BSD | GPL"
 LIC_FILES_CHKSUM = "file://License;md5=731de803c1ccbcb05a9b3523279c8d7f"
 
-DEPENDS = "pam attr perl-native"
-PR = "r0"
+DEPENDS = "libpam attr perl-native"
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/libs/security/linux-privs/libcap2/${BPN}-${PV}.tar.bz2"
 
diff --git a/meta/packages/libcap/libcap_2.19.bb b/meta/packages/libcap/libcap_2.19.bb
index 474d060562..eb861535e9 100644
--- a/meta/packages/libcap/libcap_2.19.bb
+++ b/meta/packages/libcap/libcap_2.19.bb
@@ -1,3 +1,3 @@
 require libcap.inc
 
-PR = "r0"
+PR = "r1"
diff --git a/meta/packages/pam/pam-1.1.1/99_pam b/meta/packages/pam/libpam-1.1.1/99_pam
index 97e990d10b..97e990d10b 100644
--- a/meta/packages/pam/pam-1.1.1/99_pam
+++ b/meta/packages/pam/libpam-1.1.1/99_pam
diff --git a/meta/packages/pam/pam-1.1.1/disable_crossbinary.patch b/meta/packages/pam/libpam-1.1.1/disable_crossbinary.patch
index 43359b08fe..43359b08fe 100644
--- a/meta/packages/pam/pam-1.1.1/disable_crossbinary.patch
+++ b/meta/packages/pam/libpam-1.1.1/disable_crossbinary.patch
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-account b/meta/packages/pam/libpam-1.1.1/pam.d/common-account
new file mode 100644
index 0000000000..316b17337b
--- /dev/null
+++ b/meta/packages/pam/libpam-1.1.1/pam.d/common-account
@@ -0,0 +1,25 @@
+#
+# /etc/pam.d/common-account - authorization settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authorization modules that define
+# the central access policy for use on the system.  The default is to
+# only deny service to users whose accounts are expired in /etc/shadow.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+#
+
+# here are the per-package modules (the "Primary" block)
+account [success=1 new_authtok_reqd=done default=ignore]        pam_unix.so 
+# here's the fallback if no module succeeds
+account requisite                       pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+account required                        pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+# end of pam-auth-update config
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-auth b/meta/packages/pam/libpam-1.1.1/pam.d/common-auth
new file mode 100644
index 0000000000..460b69f198
--- /dev/null
+++ b/meta/packages/pam/libpam-1.1.1/pam.d/common-auth
@@ -0,0 +1,18 @@
+#
+# /etc/pam.d/common-auth - authentication settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authentication modules that define
+# the central authentication scheme for use on the system
+# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
+# traditional Unix authentication mechanisms.
+
+# here are the per-package modules (the "Primary" block)
+auth    [success=1 default=ignore]      pam_unix.so nullok_secure
+# here's the fallback if no module succeeds
+auth    requisite                       pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+auth    required                        pam_permit.so
+# and here are more per-package modules (the "Additional" block)
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-password b/meta/packages/pam/libpam-1.1.1/pam.d/common-password
new file mode 100644
index 0000000000..3896057328
--- /dev/null
+++ b/meta/packages/pam/libpam-1.1.1/pam.d/common-password
@@ -0,0 +1,26 @@
+#
+# /etc/pam.d/common-password - password-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define the services to be
+# used to change user passwords.  The default is pam_unix.
+
+# Explanation of pam_unix options:
+#
+# The "sha512" option enables salted SHA512 passwords.  Without this option,
+# the default is Unix crypt.  Prior releases used the option "md5".
+#
+# The "obscure" option replaces the old `OBSCURE_CHECKS_ENAB' option in
+# login.defs.
+#
+# See the pam_unix manpage for other options.
+
+# here are the per-package modules (the "Primary" block)
+password        [success=1 default=ignore]      pam_unix.so obscure sha512
+# here's the fallback if no module succeeds
+password        requisite                       pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+password        required                        pam_permit.so
+# and here are more per-package modules (the "Additional" block)
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-session b/meta/packages/pam/libpam-1.1.1/pam.d/common-session
new file mode 100644
index 0000000000..a594dd9d90
--- /dev/null
+++ b/meta/packages/pam/libpam-1.1.1/pam.d/common-session
@@ -0,0 +1,19 @@
+#
+# /etc/pam.d/common-session - session-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of sessions of *any* kind (both interactive and
+# non-interactive).
+#
+
+# here are the per-package modules (the "Primary" block)
+session [default=1]                     pam_permit.so
+# here's the fallback if no module succeeds
+session requisite                       pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session required                        pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+session required        pam_unix.so 
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-session-noninteractive b/meta/packages/pam/libpam-1.1.1/pam.d/common-session-noninteractive
new file mode 100644
index 0000000000..b110bb2b49
--- /dev/null
+++ b/meta/packages/pam/libpam-1.1.1/pam.d/common-session-noninteractive
@@ -0,0 +1,19 @@
+#
+# /etc/pam.d/common-session-noninteractive - session-related modules
+# common to all non-interactive services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of all non-interactive sessions.
+#
+
+# here are the per-package modules (the "Primary" block)
+session [default=1]                     pam_permit.so
+# here's the fallback if no module succeeds
+session requisite                       pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session required                        pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+session required        pam_unix.so 
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/other b/meta/packages/pam/libpam-1.1.1/pam.d/other
new file mode 100644
index 0000000000..6e40cd0c02
--- /dev/null
+++ b/meta/packages/pam/libpam-1.1.1/pam.d/other
@@ -0,0 +1,27 @@
+#
+# /etc/pam.d/other - specify the PAM fallback behaviour
+#
+# Note that this file is used for any unspecified service; for example
+#if /etc/pam.d/cron  specifies no session modules but cron calls
+#pam_open_session, the session module out of /etc/pam.d/other is
+#used.  
+
+#If you really want nothing to happen then use pam_permit.so or
+#pam_deny.so as appropriate.
+
+# We use pam_warn.so to generate syslog notes that the 'other'
+#fallback rules are being used (as a hint to suggest you should setup
+#specific PAM rules for the service and aid to debugging). We then 
+#fall back to the system default in /etc/pam.d/common-*
+
+auth       required     pam_warn.so
+auth       include      common-auth
+
+account    required     pam_warn.so
+account    include      common-account
+
+password   required     pam_warn.so
+password   include      common-password
+
+session    required     pam_warn.so
+session    include      common-session
diff --git a/meta/packages/pam/libpam_1.1.1.bb b/meta/packages/pam/libpam_1.1.1.bb
new file mode 100644
index 0000000000..12c4172272
--- /dev/null
+++ b/meta/packages/pam/libpam_1.1.1.bb
@@ -0,0 +1,77 @@
+DESCRIPTION = "Linux-PAM (Pluggable Authentication Modules for Linux), Basically, it is a flexible mechanism for authenticating users"
+HOMEPAGE = "http://www.kernel.org/pub/linux/libs/pam/"
+BUGTRACKER = "http://sourceforge.net/projects/pam/support"
+# PAM allows dual licensed under GPL and BSD.
+# /etc/pam.d comes from Debian libpam-runtime in 2009-11 (at that time 
+# libpam-runtime-1.0.1 is GPLv2+), by openembedded
+LICENSE = "GPLv2+ | BSD"
+PR = "r0"
+
+DEPENDS = "bison flex"
+RDEPENDS_${PN}-runtime = "libpam pam-plugin-deny pam-plugin-permit pam-plugin-warn pam-plugin-unix"
+RRECOMMENDS_${PN} = "libpam-runtime"
+
+SRC_URI = "http://www.kernel.org/pub/linux/libs/pam/library/Linux-PAM-${PV}.tar.bz2 \
+           file://disable_crossbinary.patch \
+           file://99_pam \
+           file://pam.d/*"
+
+EXTRA_OECONF = "--with-db-uniquename=_pam \
+                --includedir=${includedir}/security \
+                --libdir=${base_libdir} \
+                --disable-regenerate-docu"
+CFLAGS_append = " -fPIC "
+
+S = "${WORKDIR}/Linux-PAM-${PV}"
+
+inherit autotools gettext
+
+PACKAGES += "${PN}-runtime"
+FILES_${PN} = "${base_libdir}/lib*${SOLIBS}"
+FILES_${PN}-dbg += "${base_libdir}/security/.debug \
+                    ${base_libdir}/security/pam_filter/.debug"
+FILES_${PN}-dev += "${base_libdir}/security/*.la ${base_libdir}/*.la ${base_libdir}/lib*${SOLIBSDEV}"
+FILES_${PN}-runtime = "${sysconfdir}"
+
+PACKAGES_DYNAMIC += " pam-plugin-*"
+
+python populate_packages_prepend () {
+        import os.path
+
+        def pam_plugin_append_file(pn, dir, file):
+                nf = os.path.join(dir, file)
+                of = bb.data.getVar('FILES_' + pn, d, True)
+                if of:
+                        nf = of + " " + nf
+                bb.data.setVar('FILES_' + pn, nf, d)
+
+        dvar = bb.data.expand('${WORKDIR}/package', d, True)
+        pam_libdir = bb.data.expand('${base_libdir}/security', d)
+        pam_sbindir = bb.data.expand('${sbindir}', d)
+        pam_filterdir = bb.data.expand('${base_libdir}/security/pam_filter', d)
+
+        do_split_packages(d, pam_libdir, '^pam(.*)\.so$', 'pam-plugin%s', 'PAM plugin for %s', extra_depends='')
+        pam_plugin_append_file('pam-plugin-unix', pam_sbindir, 'unix_chkpwd')
+        pam_plugin_append_file('pam-plugin-unix', pam_sbindir, 'unix_update')
+        pam_plugin_append_file('pam-plugin-tally', pam_sbindir, 'pam_tally')
+        pam_plugin_append_file('pam-plugin-tally2', pam_sbindir, 'pam_tally2')
+        pam_plugin_append_file('pam-plugin-timestamp', pam_sbindir, 'pam_timestamp_check')
+        pam_plugin_append_file('pam-plugin-mkhomedir', pam_sbindir, 'mkhomedir_helper')
+        do_split_packages(d, pam_filterdir, '^(.*)$', 'pam-filter-%s', 'PAM filter for %s', extra_depends='')
+}
+
+do_install() {
+        autotools_do_install
+
+        # don't install /var/run when populating rootfs. Do it through volatile
+        rm -rf ${D}/var
+        install -d ${D}${sysconfdir}/default/volatiles
+        install -m 0644 ${WORKDIR}/99_pam ${D}/etc/default/volatiles
+
+        install -d ${D}${sysconfdir}/pam.d/     
+        install -m 0644 ${WORKDIR}/pam.d/* ${D}${sysconfdir}/pam.d/
+}
+
+pkg_postinst_${PN} () {
+        /etc/init.d/populate-volatile.sh update
+}
diff --git a/meta/packages/polkit/polkit_0.96.bb b/meta/packages/polkit/polkit_0.96.bb
index e17dc93f85..e6e030b19a 100644
--- a/meta/packages/polkit/polkit_0.96.bb
+++ b/meta/packages/polkit/polkit_0.96.bb
@@ -6,9 +6,9 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=155db86cdbafa7532b41f390409283eb \
                     file://docs/polkit/html/license.html;md5=4c17ef1587e0f096c82157160d4e340e"
 
 SRC_URI = "http://hal.freedesktop.org/releases/polkit-${PV}.tar.gz"
-PR="r1"
-DEPENDS = "pam expat dbus-glib eggdbus intltool"
-RDEPENDS = "pam"
+PR = "r2"
+DEPENDS = "libpam expat dbus-glib eggdbus intltool"
+RDEPENDS = "libpam"
 EXTRA_OECONF = "--with-authfw=pam --with-os-type=moblin --disable-man-pages --disable-gtk-doc --disable-introspection"
 
 inherit autotools pkgconfig