bootchart2: update to 0.14.8

(From OE-Core rev: e9da2ea26483934a624d55139a84b4d2a2782fb0)

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

1 files changed, 155 insertions, 0 deletions

diff --git a/meta/recipes-devtools/bootchart2/bootchart2_0.14.8.bb b/meta/recipes-devtools/bootchart2/bootchart2_0.14.8.bb
new file mode 100644
index 0000000000..86c614a63b
--- /dev/null
+++ b/meta/recipes-devtools/bootchart2/bootchart2_0.14.8.bb
@@ -0,0 +1,155 @@
+# Copyright (c) 2013 LG Electronics, Inc.
+# Copyright (C) 2014 Intel Corp.
+
+# This recipe creates packages for the bootchart2 system-wide profiler daemon 
+# and related utilities. Depending on the images you're building, additional
+# configuration may be needed in order to use it.
+#
+# Packages:
+#   *   bootchart2 - The daemon itself.
+#   *   pybootchartgui - Python program to visualize and display the data
+#       collected by bootchart2 or compatible daemons such as the original 
+#       bootchart.
+#   *   bootchartd-stop-initscript - A SysV init script to stop data collection
+#       when booting completes (see below for details.)
+#
+# While bootchart2 is designed to stop collecting data roughly when the boot 
+# process completes, it is not exactly a stopwatch. It has a list of programs 
+# which are supposed signify that the boot process has completed (for example,
+# openbox or gnome-shell,) but it waits a full 20 seconds after such a program
+# is launched before stopping itself, to collect additional data.
+#
+# If you are using a window manager or GUI which isn't included in bootchart2's
+# default configuration file, you should write bbappend file to amend
+# bootchartd.conf and add it to EXIT_PROC. An example of this is shown in this
+# recipe, where the Matchbox window manager (used by Sato) is added.
+#
+# If you want data collection to end at a certain point exactly, you should
+# arrange for the following command to be run:
+#   bootchartd stop
+# You might set this command to be launched by the desktop environment shipped
+# on the image you're building after the other startup programs are complete.
+# This will not incur the 20 second wait period and will cause bootchart2 to
+# behave a bit more like a stopwatch. An example of this is shown in this 
+# recipe, specifically the bootchartd-stop-initscript package, which stops data
+# collection as the last action when switching to runlevels 2 through 5. You can
+# add bootchartd-stop-initscript to IMAGE_INSTALL if you need to use it.
+#
+# Unless you're doing something special, if your image does not launch an X 
+# window manager, you will need to add bootchartd-stop-initscript to your image.
+#
+# Bootchart2 can be started in two ways. Data collection can be initiated by
+# running the following command:
+#   bootchartd start
+# However, for the most complete data, the bootchart2 developers recommend
+# running it as PID 1. This can be done by adding the following to the kernel 
+# command line parameters in the bootloader setup:
+#   init=/sbin/bootchartd
+# When invoked this way, bootchart2 will set itself up and then automatically 
+# run /sbin/init. For example, when booting the default qemux86 image, one might
+# use a command like this:
+#   runqemu qemux86 bootparams="initcall_debug printk.time=y quiet \
+#                               init=/sbin/bootchartd"
+#
+# Neither method is actually implemented here, choose what works for you.
+#
+# If you are building your image with systemd instead of SysV init, bootchart2
+# includes systemd service files to begin collection automatically at boot and 
+# end collection automatically 20 seconds after the boot process has completed.
+# However, be aware that systemd tends to start bootchart2 relatively late into
+# the boot process, so it's highly recommended to use bootchart2 as PID 1. If 
+# you're using systemd and you wish to use another method to stop data
+# collection at a time of your choosing, you may do so as long as you get to it
+# before the 20 second timeout of the systemd service files. Also, you may write
+# a bbappend to patch bootchart2-done.timer.in to increase or decrease the
+# timeout. Decreasing it to 0 will make it behave like
+# bootchartd-stop-initscript.
+#
+# By default, when data collection is stopped, a file named bootchart.tgz will
+# be created in /var/log. If pybootchartgui is included in your image,
+# bootchart.png will also be created at the same time. However, this results in
+# a noticeable hitch or pause at boot time, which may not be what you want on an
+# embedded device. So you may prefer to omit pybootchartgui from your image. In
+# that case, copy bootchart.tgz over to your development system and generate
+# bootchart.png there. To get pybootchartgui on your development system, you can
+# either install it directly from some other source, or build bootchart2-native
+# and find pybootchartgui in the native sysroot:
+#    bitbake bootchart2-native
+#   ./tmp/sysroots/x86_64-linux/usr/bin/pybootchartgui /path/to/bootchart.tgz
+# Note that, whether installed on your build system or on your image, the 
+# pybootchartgui provided by this recipe does not support the -i option. You 
+# will need to install pybootchartgui by other means in order to run it in
+# interactive mode.
+
+SUMMARY = "Booting sequence and CPU,I/O usage monitor"
+DESCRIPTION = "Monitors where the system spends its time at start, creating a graph of all processes, disk utilization, and wait time."
+AUTHOR = "Wonhong Kwon <wonhong.kwon@lge.com>"
+HOMEPAGE = "https://github.com/mmeeks/bootchart"
+LICENSE = "GPL-3.0"
+LIC_FILES_CHKSUM = "file://COPYING;md5=44ac4678311254db62edf8fd39cb8124"
+
+UPSTREAM_CHECK_GITTAGREGEX = "(?P<pver>\d+\.\d+(\.\d+)*)"
+
+SRC_URI = "git://github.com/mmeeks/bootchart.git \
+           file://bootchartd_stop.sh \
+          "
+
+S = "${WORKDIR}/git"
+SRCREV = "48e0071048564c6af75ab969e842d6dec808da09"
+
+inherit systemd
+inherit update-rc.d
+inherit pythonnative
+
+# The only reason to build bootchart2-native is for a native pybootchartgui.
+BBCLASSEXTEND = "native"
+
+SYSTEMD_SERVICE_${PN} = "bootchart2.service bootchart2-done.service bootchart2-done.timer"
+
+UPDATERCPN = "bootchartd-stop-initscript"
+INITSCRIPT_NAME = "bootchartd_stop.sh"
+INITSCRIPT_PARAMS = "start 99 2 3 4 5 ."
+
+# We want native pybootchartgui to execute with the correct Python interpeter.
+do_compile_append_class-native () {
+    echo "#! ${PYTHON}" | cat - ${S}/pybootchartgui.py > ${WORKDIR}/temp_pybootchartgui
+    mv ${WORKDIR}/temp_pybootchartgui ${S}/pybootchartgui.py
+    chmod +x ${S}/pybootchartgui
+}
+
+do_compile_prepend () {
+    export PY_LIBDIR="${libdir}/${PYTHON_DIR}"
+    export BINDIR="${bindir}"
+    export LIBDIR="${base_libdir}"
+}
+
+do_install () {
+    install -d ${D}${sysconfdir} # needed for -native
+    export PY_LIBDIR="${libdir}/${PYTHON_DIR}"
+    export BINDIR="${bindir}"
+    export DESTDIR="${D}"
+    export LIBDIR="${base_libdir}"
+
+    oe_runmake install
+    install -d ${D}${sysconfdir}/init.d
+    install -m 0755 ${WORKDIR}/bootchartd_stop.sh ${D}${sysconfdir}/init.d
+
+    echo 'EXIT_PROC="$EXIT_PROC matchbox-window-manager"' >> ${D}${sysconfdir}/bootchartd.conf
+}
+
+PACKAGES =+ "pybootchartgui"
+FILES_pybootchartgui += "${libdir}/python*/site-packages/pybootchartgui ${bindir}/pybootchartgui"
+RDEPENDS_pybootchartgui = "python-pycairo python-compression python-image python-textutils python-shell python-compression python-codecs"
+RDEPENDS_${PN}_class-target += "${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', 'sysvinit-pidof', 'procps', d)}"
+RDEPENDS_${PN}_class-target += "lsb"
+DEPENDS_append_class-native = " python-pycairo-native"
+
+PACKAGES =+ "bootchartd-stop-initscript"
+FILES_bootchartd-stop-initscript += "${sysconfdir}/init.d ${sysconfdir}/rc*.d"
+
+FILES_${PN} += "${base_libdir}/bootchart/bootchart-collector"
+FILES_${PN} += "${base_libdir}/bootchart/tmpfs"
+FILES_${PN} += "${libdir}"
+FILES_${PN}-doc += "${datadir}/docs"
+
+RCONFLICTS_${PN} = "bootchart"