base-passwd: remove login.defs references

login.defs is owned by shadow-utils, and doesn't belong here. The
shadow-sysroot recipe was created to handle the case this was
originally added for (useradd.bbclass support).

(From OE-Core rev: 3244e21b0d4bd7472330d058b97dc62ea79e0ef9)

Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

2 files changed, 1 insertions, 394 deletions

diff --git a/meta/recipes-core/base-passwd/base-passwd-3.5.22/login.defs b/meta/recipes-core/base-passwd/base-passwd-3.5.22/login.defs
deleted file mode 100644
index 1d392acf2b..0000000000
--- a/meta/recipes-core/base-passwd/base-passwd-3.5.22/login.defs
+++ /dev/null
@@ -1,386 +0,0 @@
-#
-# /etc/login.defs - Configuration control definitions for the shadow package.
-#
-#       $Id: login.defs 3038 2009-07-23 20:41:35Z nekral-guest $
-#
-
-#
-# Delay in seconds before being allowed another attempt after a login failure
-# Note: When PAM is used, some modules may enfore a minimal delay (e.g.
-#       pam_unix enforces a 2s delay)
-#
-FAIL_DELAY              3
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-#
-FAILLOG_ENAB            yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-LOG_UNKFAIL_ENAB        no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS           no
-
-#
-# Enable logging and display of /var/log/lastlog login time info.
-#
-LASTLOG_ENAB            yes
-
-#
-# Enable checking and display of mailbox status upon login.
-#
-# Disable if the shell startup files already check for mail
-# ("mailx -e" or equivalent).
-#
-#MAIL_CHECK_ENAB                yes
-
-#
-# Enable additional checks upon password changes.
-#
-OBSCURE_CHECKS_ENAB     yes
-
-#
-# Enable checking of time restrictions specified in /etc/porttime.
-#
-PORTTIME_CHECKS_ENAB    yes
-
-#
-# Enable setting of ulimit, umask, and niceness from passwd gecos field.
-#
-QUOTAS_ENAB             yes
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB          yes
-SYSLOG_SG_ENAB          yes
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-CONSOLE         /etc/securetty
-#CONSOLE        console:tty01:tty02:tty03:tty04
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE     /var/log/sulog
-
-#
-# If defined, ":" delimited list of "message of the day" files to
-# be displayed upon login.
-#
-MOTD_FILE       /etc/motd
-#MOTD_FILE      /etc/motd:/usr/lib/news/news-motd
-
-#
-# If defined, this file will be output before each login prompt.
-#
-#ISSUE_FILE     /etc/issue
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE   /etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format.
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE       /var/log/btmp
-
-#
-# If defined, name of file whose presence which will inhibit non-root
-# logins.  The contents of this file should be a message indicating
-# why logins are inhibited.
-#
-NOLOGINS_FILE   /etc/nologin
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME         su
-
-#
-# *REQUIRED*
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define both, #MAIL_DIR takes precedence.
-#
-#MAIL_DIR       /var/spool/mail
-MAIL_FILE       .mail
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE  .hushlogin
-#HUSHLOGIN_FILE /etc/hushlogins
-
-#
-# If defined, either a TZ environment parameter spec or the
-# fully-rooted pathname of a file containing such a spec.
-#
-#ENV_TZ         TZ=CST6CDT
-#ENV_TZ         /etc/tzname
-
-#
-# If defined, an HZ environment parameter spec.
-#
-# for Linux/x86
-ENV_HZ          HZ=100
-# For Linux/Alpha...
-#ENV_HZ         HZ=1024
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH      PATH=/sbin:/bin:/usr/sbin:/usr/bin
-ENV_PATH        PATH=/bin:/usr/bin
-
-#
-# Terminal permissions
-#
-#       TTYGROUP        Login tty will be assigned this group ownership.
-#       TTYPERM         Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-TTYGROUP        tty
-TTYPERM         0600
-
-#
-# Login configuration initializations:
-#
-#       ERASECHAR       Terminal ERASE character ('\010' = backspace).
-#       KILLCHAR        Terminal KILL character ('\025' = CTRL/U).
-#       ULIMIT          Default "ulimit" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# The ULIMIT is used only if the system supports it.
-# (now it works with setrlimit too; ulimit is in 512-byte units)
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR       0177
-KILLCHAR        025
-#ULIMIT         2097152
-
-# Default initial "umask" value for non-PAM enabled systems.
-# UMASK is also used by useradd and newusers to set the mode of new home
-# directories.
-# 022 is the default value, but 027, or even 077, could be considered
-# better for privacy. There is no One True Answer here: each sysadmin
-# must make up her mind.
-UMASK           022
-
-#
-# Password aging controls:
-#
-#       PASS_MAX_DAYS   Maximum number of days a password may be used.
-#       PASS_MIN_DAYS   Minimum number of days allowed between password changes.
-#       PASS_MIN_LEN    Minimum acceptable password length.
-#       PASS_WARN_AGE   Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS   99999
-PASS_MIN_DAYS   0
-PASS_MIN_LEN    5
-PASS_WARN_AGE   7
-
-#
-# If "yes", the user must be listed as a member of the first gid 0 group
-# in /etc/group (called "root" on most Linux systems) to be able to "su"
-# to uid 0 accounts.  If the group doesn't exist or is empty, no one
-# will be able to "su" to uid 0.
-#
-SU_WHEEL_ONLY   no
-
-#
-# If compiled with cracklib support, where are the dictionaries
-#
-CRACKLIB_DICTPATH       /var/cache/cracklib/cracklib_dict
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN                  1000
-UID_MAX                 60000
-# System accounts
-SYS_UID_MIN               101
-SYS_UID_MAX               999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN                  1000
-GID_MAX                 60000
-# System accounts
-SYS_GID_MIN               101
-SYS_GID_MAX               999
-
-#
-# Max number of login retries if password is bad
-#
-LOGIN_RETRIES           5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT           60
-
-#
-# Maximum number of attempts to change password if rejected (too easy)
-#
-PASS_CHANGE_TRIES       5
-
-#
-# Warn about weak passwords (but still allow them) if you are root.
-#
-PASS_ALWAYS_WARN        yes
-
-#
-# Number of significant characters in the password for crypt().
-# Default is 8, don't change unless your crypt() is better.
-# Ignored if MD5_CRYPT_ENAB set to "yes".
-#
-#PASS_MAX_LEN           8
-
-#
-# Require password before chfn/chsh can make any changes.
-#
-CHFN_AUTH               yes
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT           rwh
-
-#
-# Password prompt (%s will be replaced by user name).
-#
-# XXX - it doesn't work correctly yet, for now leave it commented out
-# to use the default which is just "Password: ".
-#LOGIN_STRING           "%s's Password: "
-
-#
-# Only works if compiled with MD5_CRYPT defined:
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# Note: If you use PAM, it is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB no
-
-#
-# Only works if compiled with ENCRYPTMETHOD_SELECT defined:
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: If you use PAM, it is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-#ENCRYPT_METHOD DES
-
-#
-# Only works if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-#CONSOLE_GROUPS         floppy:audio:cdrom
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME    yes
-
-#
-# If this file exists and is readable, login environment will be
-# read from it.  Every line should be in the form name=value.
-#
-ENVIRON_FILE    /etc/environment
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD    /usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# This also enables userdel to remove user groups if no members exist.
-#
-USERGROUPS_ENAB yes
-
-#
-# If set to a non-nul number, the shadow utilities will make sure that
-# groups never have more than this number of users on one line.
-# This permit to support split groups (groups split into multiple lines,
-# with the same group ID, to avoid limitation of the line length in the
-# group file).
-#
-# 0 is the default value and disables this feature.
-#
-#MAX_MEMBERS_PER_GROUP  0
-
-#
-# If useradd should create home directories for users by default (non
-# system users only)
-# This option is overridden with the -M or -m flags on the useradd command
-# line.
-#
-CREATE_HOME     yes
-
diff --git a/meta/recipes-core/base-passwd/base-passwd_3.5.22.bb b/meta/recipes-core/base-passwd/base-passwd_3.5.22.bb
index 7b1fdf17c2..a155b4102d 100644
--- a/meta/recipes-core/base-passwd/base-passwd_3.5.22.bb
+++ b/meta/recipes-core/base-passwd/base-passwd_3.5.22.bb
@@ -7,8 +7,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=eb723b61539feef013de476e68b5c50a"
 
 SRC_URI = "${DEBIAN_MIRROR}/main/b/base-passwd/base-passwd_${PV}.tar.gz \
            file://nobash.patch \
-           file://root-home.patch \
-           file://login.defs"
+           file://root-home.patch"
 
 SRC_URI[md5sum] = "47f22ab6b572d0133409ff6ad1fab402"
 SRC_URI[sha256sum] = "d34acb35a9f9f221e7e4f642b9ef4b22083dd77bb2fc7216756f445316d842fc"
@@ -30,7 +29,6 @@ do_install () {
         install -d -m 755 ${D}${datadir}/base-passwd
         install -o root -g root -p -m 644 passwd.master ${D}${datadir}/base-passwd/
         install -o root -g root -p -m 644 group.master ${D}${datadir}/base-passwd/
-        install -o root -g root -p -m 644 ${S}/../login.defs ${D}${datadir}/base-passwd/login.defs
 
         install -d -m 755 ${D}${docdir}/${PN}
         install -p -m 644 debian/changelog ${D}${docdir}/${PN}/
@@ -49,10 +47,6 @@ pkg_postinst_${PN} () {
         if [ ! -e $D${sysconfdir}/group ] ; then
                 cp $D${datadir}/base-passwd/group.master $D${sysconfdir}/group
         fi
-
-        if [ ! -e $D{sysconfdir}/login.defs ] ; then
-                cp $D${datadir}/base-passwd/login.defs $D${sysconfdir}/login.defs
-        fi
         exit 0
 }
 
@@ -67,6 +61,5 @@ base_passwd_sstate_postinst() {
                 install -d -m 755 ${STAGING_DIR_TARGET}${sysconfdir}
                 install -p -m 644 ${STAGING_DIR_TARGET}${datadir}/base-passwd/passwd.master ${STAGING_DIR_TARGET}${sysconfdir}/passwd
                 install -p -m 644 ${STAGING_DIR_TARGET}${datadir}/base-passwd/group.master ${STAGING_DIR_TARGET}${sysconfdir}/group
-                install -p -m 644 ${STAGING_DIR_TARGET}${datadir}/base-passwd/login.defs ${STAGING_DIR_TARGET}/${sysconfdir}/login.defs
         fi
 }