Major layout change to the packages directory

Having one monolithic packages directory makes it hard to find things
and is generally overwhelming. This commit splits it into several
logical sections roughly based on function, recipes.txt gives more
information about the classifications used.

The opportunity is also used to switch from "packages" to "recipes"
as used in OpenEmbedded as the term "packages" can be confusing to
people and has many different meanings.

Not all recipes have been classified yet, this is just a first pass
at separating things out. Some packages are moved to meta-extras as
they're no longer actively used or maintained.

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

13 files changed, 1695 insertions, 0 deletions

diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/99_wpa_supplicant b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/99_wpa_supplicant
new file mode 100644
index 0000000000..6ff4dd8826
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/99_wpa_supplicant
@@ -0,0 +1 @@
+d root root 0700 /var/run/wpa_supplicant none
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/defaults-sane b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/defaults-sane
new file mode 100644
index 0000000000..67c4cbddf8
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/defaults-sane
@@ -0,0 +1,8 @@
+# Useful flags:
+#  -i <ifname>          Interface (required, unless specified in config)
+#  -D <driver>          Wireless Driver
+#  -d                   Debugging (-dd for more)
+#  -q                   Quiet (-qq for more)
+
+CONFIG="/etc/wpa_supplicant.conf"
+OPTIONS="-i eth1 -D wext"
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/defconfig b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/defconfig
new file mode 100644
index 0000000000..c165343399
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/defconfig
@@ -0,0 +1,157 @@
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD
+
+# for wpa_supplicant, wpa_cli
+LIBS = $(TARGET_LDFLAGS)
+
+# for wpa_passphrase:
+LIBS_p = $(TARGET_LDFLAGS)
+
+
+# Uncomment following two lines and fix the paths if you have installed openssl
+# in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+#       -I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+CONFIG_DRIVER_HERMES=y
+
+# Driver interface for madwifi driver
+#CONFIG_DRIVER_MADWIFI=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../madwifi/wpa
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for ndiswrapper
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+#CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for Broadcom driver
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100 driver
+#CONFIG_DRIVER_IPW2100=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5 (automatically included if EAP-TTLS is enabled)
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Replace native Linux implementation of packet sockets with libdnet/libpcap.
+# This will be automatically set for non-Linux OS.
+#CONFIG_DNET_PCAP=y
+
+# Include control interface for external programs, e.g, wpa_cli
+CONFIG_CTRL_IFACE=y
+
+# Include interface for using external supplicant (Xsupplicant) for EAP
+# authentication
+#CONFIG_XSUPPLICANT_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/defconfig-gnutls b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/defconfig-gnutls
new file mode 100644
index 0000000000..e325bb83e9
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/defconfig-gnutls
@@ -0,0 +1,407 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+#       -I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+#CONFIG_DRIVER_NL80211=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Include client MLME (management frame processing) for test driver
+# This can be used to test MLME operations in hostapd with the test interface.
+# space.
+#CONFIG_CLIENT_MLME=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#       path is given on command line, not here; this option is just used to
+#       select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+#CONFIG_GNUTLS_EXTRA=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+CONFIG_TLS = gnutls
+CONFIG_GNUTLS_EXTRA=y
+CONFIG_CTRL_IFACE_DBUS=y
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/init.sh b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/init.sh
new file mode 100644
index 0000000000..bc7ee9184e
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/init.sh
@@ -0,0 +1,50 @@
+#!/bin/sh
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+DAEMON=/usr/sbin/wpa_supplicant
+CONFIG="/etc/wpa_supplicant.conf"
+PNAME="wpa_supplicant"
+
+# insane defaults
+OPTIONS=""
+
+test -f /etc/default/wpa && . /etc/default/wpa
+
+if [ ! -f $CONFIG ]; then
+        echo "No configuration file found, not starting."
+        exit 1
+fi
+
+test -f $DAEMON || exit 0
+
+case "$1" in
+        start)
+                echo -n "Starting wpa_supplicant: "
+                start-stop-daemon -S -b -x $DAEMON -- -Bw -c $CONFIG $OPTIONS >/dev/null
+                echo "done."
+                ;;
+        stop)
+                echo -n "Stopping wpa_supplicant: "
+                start-stop-daemon -K -n $PNAME >/dev/null
+                echo "done."
+                ;;
+        reload|force-reload)
+                echo -n "Reloading wpa_supplicant: "
+                killall -HUP $PNAME
+                echo "done."
+                ;;
+        restart)
+                echo -n "Restarting wpa_supplicant: "
+                start-stop-daemon -K -n $PNAME >/dev/null
+                sleep 1
+                start-stop-daemon -S -b -x $DAEMON -- -Bw -c $CONFIG $OPTIONS >/dev/null
+                echo "done."
+                ;;
+        *)
+                echo "Usage: $0 {start|stop|restart|reload|force-reload}" >&2
+                exit 1
+                ;;
+esac
+
+exit 0
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa-supplicant.sh b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa-supplicant.sh
new file mode 100644
index 0000000000..5c9e5d33a7
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa-supplicant.sh
@@ -0,0 +1,85 @@
+#!/bin/sh
+
+
+WPA_SUP_BIN="/usr/sbin/wpa_supplicant"
+WPA_SUP_PNAME="wpa_supplicant"
+WPA_SUP_PIDFILE="/var/run/wpa_supplicant.$IFACE.pid"
+WPA_SUP_OPTIONS="-B -P $WPA_SUP_PIDFILE -i $IFACE"
+
+VERBOSITY=0
+
+
+if [ -s "$IF_WPA_CONF" ]; then
+        WPA_SUP_CONF="-c $IF_WPA_CONF"
+else
+        exit 0
+fi
+
+if [ ! -x "$WPA_SUP_BIN" ]; then
+        
+        if [ "$VERBOSITY" = "1" ]; then
+                echo "$WPA_SUP_PNAME: binaries not executable or missing from $WPA_SUP_BIN"
+        fi
+        
+        exit 1
+fi
+
+if [ "$MODE" = "start" ] ; then
+        # driver type of interface, defaults to wext when undefined
+        if [ -s "/etc/wpa_supplicant/driver.$IFACE" ]; then
+                IF_WPA_DRIVER=$(cat "/etc/wpa_supplicant/driver.$IFACE")
+        elif [ -z "$IF_WPA_DRIVER" ]; then
+                
+                if [ "$VERBOSITY" = "1" ]; then
+                        echo "$WPA_SUP_PNAME: wpa-driver not provided, using \"wext\""
+                fi
+                
+                IF_WPA_DRIVER="wext"
+        fi
+        
+        # if we have passed the criteria, start wpa_supplicant
+        if [ -n "$WPA_SUP_CONF" ]; then
+                
+                if [ "$VERBOSITY" = "1" ]; then
+                        echo "$WPA_SUP_PNAME: $WPA_SUP_BIN $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER"
+                fi
+                
+                start-stop-daemon --start --quiet \
+                        --name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \
+                        --  $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER
+        fi
+
+        # if the interface socket exists, then wpa_supplicant was invoked successfully
+        if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
+        
+                if [ "$VERBOSITY" = "1" ]; then
+                        echo "$WPA_SUP_PNAME: ctrl_interface socket located at $WPA_COMMON_CTRL_IFACE/$IFACE"
+                fi
+
+                exit 0
+                
+        fi
+        
+elif [ "$MODE" = "stop" ]; then
+
+        if [ -f "$WPA_SUP_PIDFILE" ]; then
+                
+                if [ "$VERBOSITY" = "1" ]; then
+                        echo "$WPA_SUP_PNAME: terminating $WPA_SUP_PNAME daemon"
+                fi
+                
+                start-stop-daemon --stop --quiet \
+                        --name $WPA_SUP_PNAME --pidfile $WPA_SUP_PIDFILE
+                        
+                if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
+                        rm -f $WPA_COMMON_CTRL_IFACE/$IFACE
+                fi
+                        
+                if [ -f "$WPA_SUP_PIDFILE" ]; then
+                        rm -f $WPA_SUP_PIDFILE
+                fi
+        fi
+
+fi
+
+exit 0
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant-0.5.7-always-scan.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant-0.5.7-always-scan.patch
new file mode 100644
index 0000000000..25afd07a11
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant-0.5.7-always-scan.patch
@@ -0,0 +1,12 @@
+diff -up wpa_supplicant-0.5.7/wpa_supplicant.c.always-scan wpa_supplicant-0.5.7/wpa_supplicant.c
+--- wpa_supplicant-0.5.7/wpa_supplicant.c.always-scan   2007-09-25 15:51:35.000000000 -0400
++++ wpa_supplicant-0.5.7/wpa_supplicant.c       2007-09-25 16:31:27.000000000 -0400
+@@ -972,7 +972,7 @@ static void wpa_supplicant_scan(void *el
+        struct wpa_ssid *ssid;
+        int enabled, scan_req = 0, ret;
+ 
+-       if (wpa_s->disconnected)
++       if (wpa_s->disconnected && !wpa_s->scan_req)
+                return;
+ 
+        enabled = 0;
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant-fix-deprecated-dbus-function.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant-fix-deprecated-dbus-function.patch
new file mode 100644
index 0000000000..dbd5e4e934
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant-fix-deprecated-dbus-function.patch
@@ -0,0 +1,187 @@
+--- dbus_dict_helpers.c.array-fix       2006-12-18 12:31:11.000000000 -0500
++++ dbus_dict_helpers.c 2006-12-20 03:17:08.000000000 -0500
+@@ -629,36 +629,55 @@ dbus_bool_t wpa_dbus_dict_open_read(DBus
+ }
+ 
+ 
++#define BYTE_ARRAY_CHUNK_SIZE 34
++#define BYTE_ARRAY_ITEM_SIZE (sizeof (char))
++
+ static dbus_bool_t _wpa_dbus_dict_entry_get_byte_array(
+-       DBusMessageIter *iter, int array_len, int array_type,
++       DBusMessageIter *iter, int array_type,
+        struct wpa_dbus_dict_entry *entry)
+ {
+-       dbus_uint32_t i = 0;
++       dbus_uint32_t count = 0;
+        dbus_bool_t success = FALSE;
+-       char byte;
++       char * buffer;
+ 
+-       /* Zero-length arrays are valid. */
+-       if (array_len == 0) {
+-               entry->bytearray_value = NULL;
+-               entry->array_type = DBUS_TYPE_BYTE;
+-               success = TRUE;
+-               goto done;
+-       }
++       entry->bytearray_value = NULL;
++       entry->array_type = DBUS_TYPE_BYTE;
+ 
+-       entry->bytearray_value = wpa_zalloc(array_len * sizeof(char));
+-       if (!entry->bytearray_value) {
++       buffer = wpa_zalloc(BYTE_ARRAY_ITEM_SIZE * BYTE_ARRAY_CHUNK_SIZE);
++       if (!buffer) {
+                perror("_wpa_dbus_dict_entry_get_byte_array[dbus]: out of "
+                       "memory");
+                goto done;
+        }
+ 
+-       entry->array_type = DBUS_TYPE_BYTE;
+-       entry->array_len = array_len;
++       entry->bytearray_value = buffer;
++       entry->array_len = 0;
+        while (dbus_message_iter_get_arg_type(iter) == DBUS_TYPE_BYTE) {
++               char byte;
++
++               if ((count % BYTE_ARRAY_CHUNK_SIZE) == 0 && count != 0) {
++                       buffer = realloc(buffer, BYTE_ARRAY_ITEM_SIZE * (count + BYTE_ARRAY_CHUNK_SIZE));
++                       if (buffer == NULL) {
++                               perror("_wpa_dbus_dict_entry_get_byte_array["
++                                      "dbus] out of memory trying to "
++                                      "retrieve the string array");
++                               goto done;
++                       }
++               }
++               entry->bytearray_value = buffer;
++
+                dbus_message_iter_get_basic(iter, &byte);
+-               entry->bytearray_value[i++] = byte;
++               entry->bytearray_value[count] = byte;
++               entry->array_len = ++count;
+                dbus_message_iter_next(iter);
+        }
++
++       /* Zero-length arrays are valid. */
++       if (entry->array_len == 0) {
++               free(entry->bytearray_value);
++               entry->strarray_value = NULL;
++       }
++
+        success = TRUE;
+ 
+ done:
+@@ -666,8 +685,11 @@ done:
+ }
+ 
+ 
++#define STR_ARRAY_CHUNK_SIZE 8
++#define STR_ARRAY_ITEM_SIZE (sizeof (char *))
++
+ static dbus_bool_t _wpa_dbus_dict_entry_get_string_array(
+-       DBusMessageIter *iter, int array_len, int array_type,
++       DBusMessageIter *iter, int array_type,
+        struct wpa_dbus_dict_entry *entry)
+ {
+        dbus_uint32_t count = 0;
+@@ -677,13 +699,7 @@ static dbus_bool_t _wpa_dbus_dict_entry_
+        entry->strarray_value = NULL;
+        entry->array_type = DBUS_TYPE_STRING;
+ 
+-       /* Zero-length arrays are valid. */
+-       if (array_len == 0) {
+-               success = TRUE;
+-               goto done;
+-       }
+-
+-       buffer = wpa_zalloc(sizeof (char *) * 8);
++       buffer = wpa_zalloc(STR_ARRAY_ITEM_SIZE * STR_ARRAY_CHUNK_SIZE);
+        if (buffer == NULL) {
+                perror("_wpa_dbus_dict_entry_get_string_array[dbus] out of "
+                       "memory trying to retrieve a string array");
+@@ -696,18 +712,14 @@ static dbus_bool_t _wpa_dbus_dict_entry_
+                const char *value;
+                char *str;
+ 
+-               if ((count % 8) == 0 && count != 0) {
+-                       char **tmp;
+-                       tmp = realloc(buffer, sizeof(char *) * (count + 8));
+-                       if (tmp == NULL) {
++               if ((count % STR_ARRAY_CHUNK_SIZE) == 0 && count != 0) {
++                       buffer = realloc(buffer, STR_ARRAY_ITEM_SIZE * (count + STR_ARRAY_CHUNK_SIZE));
++                       if (buffer == NULL) {
+                                perror("_wpa_dbus_dict_entry_get_string_array["
+                                       "dbus] out of memory trying to "
+                                       "retrieve the string array");
+-                               free(buffer);
+-                               buffer = NULL;
+                                goto done;
+                        }
+-                       buffer = tmp;
+                }
+                entry->strarray_value = buffer;
+ 
+@@ -723,6 +735,13 @@ static dbus_bool_t _wpa_dbus_dict_entry_
+                entry->array_len = ++count;
+                dbus_message_iter_next(iter);
+        }
++
++       /* Zero-length arrays are valid. */
++       if (entry->array_len == 0) {
++               free(entry->strarray_value);
++               entry->strarray_value = NULL;
++       }
++
+        success = TRUE;
+ 
+ done:
+@@ -734,7 +753,6 @@ static dbus_bool_t _wpa_dbus_dict_entry_
+        DBusMessageIter *iter_dict_val, struct wpa_dbus_dict_entry *entry)
+ {
+        int array_type = dbus_message_iter_get_element_type(iter_dict_val);
+-       int array_len;
+        dbus_bool_t success = FALSE;
+        DBusMessageIter iter_array;
+ 
+@@ -743,20 +761,14 @@ static dbus_bool_t _wpa_dbus_dict_entry_
+ 
+        dbus_message_iter_recurse(iter_dict_val, &iter_array);
+ 
+-       array_len = dbus_message_iter_get_array_len(&iter_array);
+-       if (array_len < 0)
+-               return FALSE;
+-
+        switch (array_type) {
+        case DBUS_TYPE_BYTE:
+                success = _wpa_dbus_dict_entry_get_byte_array(&iter_array,
+-                                                             array_len,
+                                                              array_type,
+                                                              entry);
+                break;
+        case DBUS_TYPE_STRING:
+                success = _wpa_dbus_dict_entry_get_string_array(&iter_array,
+-                                                               array_len,
+                                                                array_type,
+                                                                entry);
+                break;
+@@ -943,9 +955,17 @@ void wpa_dbus_dict_entry_clear(struct wp
+                break;
+        case DBUS_TYPE_ARRAY:
+                switch (entry->array_type) {
+-               case DBUS_TYPE_BYTE:
+-                       free(entry->bytearray_value);
+-                       break;
++               case DBUS_TYPE_BYTE: {
++                               free(entry->bytearray_value);
++                               break;
++                       }
++               case DBUS_TYPE_STRING: {
++                               int i;
++                               for (i = 0; i < entry->array_len; i++)
++                                       free (entry->strarray_value[i]);
++                               free (entry->strarray_value);
++                               break;
++                       }
+                }
+                break;
+        }
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant.conf b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant.conf
new file mode 100644
index 0000000000..f0c993d195
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant.conf
@@ -0,0 +1,690 @@
+##### Example wpa_supplicant configuration file ###############################
+#
+# This file describes configuration file format and lists all available option.
+# Please also take a look at simpler configuration examples in 'examples'
+# subdirectory.
+#
+# Empty lines and lines starting with # are ignored
+
+# NOTE! This file may contain password information and should probably be made
+# readable only by root user on multiuser systems.
+
+# Note: All file paths in this configuration file should use full (absolute,
+# not relative to working directory) path in order to allow working directory
+# to be changed. This can happen if wpa_supplicant is run in the background.
+
+# Whether to allow wpa_supplicant to update (overwrite) configuration
+#
+# This option can be used to allow wpa_supplicant to overwrite configuration
+# file whenever configuration is changed (e.g., new network block is added with
+# wpa_cli or wpa_gui, or a password is changed). This is required for
+# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
+# Please note that overwriting configuration file will remove the comments from
+# it.
+#update_config=1
+
+# global configuration (shared by all network blocks)
+#
+# Parameters for the control interface. If this is specified, wpa_supplicant
+# will open a control interface that is available for external programs to
+# manage wpa_supplicant. The meaning of this string depends on which control
+# interface mechanism is used. For all cases, the existance of this parameter
+# in configuration is used to determine whether the control interface is
+# enabled.
+#
+# For UNIX domain sockets (default on Linux and BSD): This is a directory that
+# will be created for UNIX domain sockets for listening to requests from
+# external programs (CLI/GUI, etc.) for status information and configuration.
+# The socket file will be named based on the interface name, so multiple
+# wpa_supplicant processes can be run at the same time if more than one
+# interface is used.
+# /var/run/wpa_supplicant is the recommended directory for sockets and by
+# default, wpa_cli will use it when trying to connect with wpa_supplicant.
+#
+# Access control for the control interface can be configured by setting the
+# directory to allow only members of a group to use sockets. This way, it is
+# possible to run wpa_supplicant as root (since it needs to change network
+# configuration and open raw sockets) and still allow GUI/CLI components to be
+# run as non-root users. However, since the control interface can be used to
+# change the network configuration, this access needs to be protected in many
+# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
+# want to allow non-root users to use the control interface, add a new group
+# and change this value to match with that group. Add users that should have
+# control interface access to this group. If this variable is commented out or
+# not included in the configuration file, group will not be changed from the
+# value it got by default when the directory or socket was created.
+#
+# When configuring both the directory and group, use following format:
+# DIR=/var/run/wpa_supplicant GROUP=wheel
+# DIR=/var/run/wpa_supplicant GROUP=0
+# (group can be either group name or gid)
+#
+# For UDP connections (default on Windows): The value will be ignored. This
+# variable is just used to select that the control interface is to be created.
+# The value can be set to, e.g., udp (ctrl_interface=udp)
+#
+# For Windows Named Pipe: This value can be used to set the security descriptor
+# for controlling access to the control interface. Security descriptor can be
+# set using Security Descriptor String Format (see http://msdn.microsoft.com/
+# library/default.asp?url=/library/en-us/secauthz/security/
+# security_descriptor_string_format.asp). The descriptor string needs to be
+# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
+# DACL (which will reject all connections). See README-Windows.txt for more
+# information about SDDL string format.
+#
+ctrl_interface=/var/run/wpa_supplicant
+
+# IEEE 802.1X/EAPOL version
+# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
+# EAPOL version 2. However, there are many APs that do not handle the new
+# version number correctly (they seem to drop the frames completely). In order
+# to make wpa_supplicant interoperate with these APs, the version number is set
+# to 1 by default. This configuration value can be used to set it to the new
+# version (2).
+eapol_version=1
+
+# AP scanning/selection
+# By default, wpa_supplicant requests driver to perform AP scanning and then
+# uses the scan results to select a suitable AP. Another alternative is to
+# allow the driver to take care of AP scanning and selection and use
+# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
+# information from the driver.
+# 1: wpa_supplicant initiates scanning and AP selection
+# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
+#    parameters (e.g., WPA IE generation); this mode can also be used with
+#    non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
+#    APs (i.e., external program needs to control association). This mode must
+#    also be used when using wired Ethernet drivers.
+# 2: like 0, but associate with APs using security policy and SSID (but not
+#    BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
+#    enable operation with hidden SSIDs and optimized roaming; in this mode,
+#    the network blocks in the configuration file are tried one by one until
+#    the driver reports successful association; each network block should have
+#    explicit security policy (i.e., only one option in the lists) for
+#    key_mgmt, pairwise, group, proto variables
+ap_scan=1
+
+# EAP fast re-authentication
+# By default, fast re-authentication is enabled for all EAP methods that
+# support it. This variable can be used to disable fast re-authentication.
+# Normally, there is no need to disable this.
+fast_reauth=1
+
+# OpenSSL Engine support
+# These options can be used to load OpenSSL engines.
+# The two engines that are supported currently are shown below:
+# They are both from the opensc project (http://www.opensc.org/)
+# By default no engines are loaded.
+# make the opensc engine available
+#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
+# make the pkcs11 engine available
+#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
+# configure the path to the pkcs11 module required by the pkcs11 engine
+#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
+
+# Dynamic EAP methods
+# If EAP methods were built dynamically as shared object files, they need to be
+# loaded here before being used in the network blocks. By default, EAP methods
+# are included statically in the build, so these lines are not needed
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
+
+# Driver interface parameters
+# This field can be used to configure arbitrary driver interace parameters. The
+# format is specific to the selected driver interface. This field is not used
+# in most cases.
+#driver_param="field=value"
+
+# Maximum lifetime for PMKSA in seconds; default 43200
+#dot11RSNAConfigPMKLifetime=43200
+# Threshold for reauthentication (percentage of PMK lifetime); default 70
+#dot11RSNAConfigPMKReauthThreshold=70
+# Timeout for security association negotiation in seconds; default 60
+#dot11RSNAConfigSATimeout=60
+
+# network block
+#
+# Each network (usually AP's sharing the same SSID) is configured as a separate
+# block in this configuration file. The network blocks are in preference order
+# (the first match is used).
+#
+# network block fields:
+#
+# disabled:
+#       0 = this network can be used (default)
+#       1 = this network block is disabled (can be enabled through ctrl_iface,
+#           e.g., with wpa_cli or wpa_gui)
+#
+# id_str: Network identifier string for external scripts. This value is passed
+#       to external action script through wpa_cli as WPA_ID_STR environment
+#       variable to make it easier to do network specific configuration.
+#
+# ssid: SSID (mandatory); either as an ASCII string with double quotation or
+#       as hex string; network name
+#
+# scan_ssid:
+#       0 = do not scan this SSID with specific Probe Request frames (default)
+#       1 = scan with SSID-specific Probe Request frames (this can be used to
+#           find APs that do not accept broadcast SSID or use multiple SSIDs;
+#           this will add latency to scanning, so enable this only when needed)
+#
+# bssid: BSSID (optional); if set, this network block is used only when
+#       associating with the AP using the configured BSSID
+#
+# priority: priority group (integer)
+# By default, all networks will get same priority group (0). If some of the
+# networks are more desirable, this field can be used to change the order in
+# which wpa_supplicant goes through the networks when selecting a BSS. The
+# priority groups will be iterated in decreasing priority (i.e., the larger the
+# priority value, the sooner the network is matched against the scan results).
+# Within each priority group, networks will be selected based on security
+# policy, signal strength, etc.
+# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
+# using this priority to select the order for scanning. Instead, they try the
+# networks in the order that used in the configuration file.
+#
+# mode: IEEE 802.11 operation mode
+# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
+# 1 = IBSS (ad-hoc, peer-to-peer)
+# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
+# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
+# to be set to 2 for IBSS. WPA-None requires following network block options:
+# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
+# both), and psk must also be set.
+#
+# proto: list of accepted protocols
+# WPA = WPA/IEEE 802.11i/D3.0
+# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
+# If not set, this defaults to: WPA RSN
+#
+# key_mgmt: list of accepted authenticated key management protocols
+# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
+# WPA-EAP = WPA using EAP authentication (this can use an external
+#       program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication
+# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
+#       generated WEP keys
+# NONE = WPA is not used; plaintext or static WEP could be used
+# If not set, this defaults to: WPA-PSK WPA-EAP
+#
+# auth_alg: list of allowed IEEE 802.11 authentication algorithms
+# OPEN = Open System authentication (required for WPA/WPA2)
+# SHARED = Shared Key authentication (requires static WEP keys)
+# LEAP = LEAP/Network EAP (only used with LEAP)
+# If not set, automatic selection is used (Open System with LEAP enabled if
+# LEAP is allowed as one of the EAP methods).
+#
+# pairwise: list of accepted pairwise (unicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# NONE = Use only Group Keys (deprecated, should not be included if APs support
+#       pairwise keys)
+# If not set, this defaults to: CCMP TKIP
+#
+# group: list of accepted group (broadcast/multicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
+# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
+# If not set, this defaults to: CCMP TKIP WEP104 WEP40
+#
+# psk: WPA preshared key; 256-bit pre-shared key
+# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
+# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
+# generated using the passphrase and SSID). ASCII passphrase must be between
+# 8 and 63 characters (inclusive).
+# This field is not needed, if WPA-EAP is used.
+# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
+# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
+# startup and reconfiguration time can be optimized by generating the PSK only
+# only when the passphrase or SSID has actually changed.
+#
+# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
+# Dynamic WEP key required for non-WPA mode
+# bit0 (1): require dynamically generated unicast WEP key
+# bit1 (2): require dynamically generated broadcast WEP key
+#       (3 = require both keys; default)
+# Note: When using wired authentication, eapol_flags must be set to 0 for the
+# authentication to be completed successfully.
+#
+# proactive_key_caching:
+# Enable/disable opportunistic PMKSA caching for WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#
+# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
+# hex without quotation, e.g., 0102030405)
+# wep_tx_keyidx: Default WEP key index (TX) (0..3)
+#
+# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is
+# allowed. This is only used with RSN/WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#peerkey=1
+#
+# Following fields are only used with internal EAP implementation.
+# eap: space-separated list of accepted EAP methods
+#       MD5 = EAP-MD5 (unsecure and does not generate keying material ->
+#                       cannot be used with WPA; to be used as a Phase 2 method
+#                       with EAP-PEAP or EAP-TTLS)
+#       MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
+#               as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+#       OTP = EAP-OTP (cannot be used separately with WPA; to be used
+#               as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+#       GTC = EAP-GTC (cannot be used separately with WPA; to be used
+#               as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+#       TLS = EAP-TLS (client and server certificate)
+#       PEAP = EAP-PEAP (with tunnelled EAP authentication)
+#       TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
+#                        authentication)
+#       If not set, all compiled in methods are allowed.
+#
+# identity: Identity string for EAP
+# anonymous_identity: Anonymous identity string for EAP (to be used as the
+#       unencrypted identity with EAP types that support different tunnelled
+#       identity, e.g., EAP-TTLS)
+# password: Password string for EAP
+# ca_cert: File path to CA certificate file (PEM/DER). This file can have one
+#       or more trusted CA certificates. If ca_cert and ca_path are not
+#       included, server certificate will not be verified. This is insecure and
+#       a trusted CA certificate should always be configured when using
+#       EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
+#       change when wpa_supplicant is run in the background.
+#       On Windows, trusted CA certificates can be loaded from the system
+#       certificate store by setting this to cert_store://<name>, e.g.,
+#       ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
+#       Note that when running wpa_supplicant as an application, the user
+#       certificate store (My user account) is used, whereas computer store
+#       (Computer account) is used when running wpasvc as a service.
+# ca_path: Directory path for CA certificate files (PEM). This path may
+#       contain multiple CA certificates in OpenSSL format. Common use for this
+#       is to point to system trusted CA list which is often installed into
+#       directory like /etc/ssl/certs. If configured, these certificates are
+#       added to the list of trusted CAs. ca_cert may also be included in that
+#       case, but it is not required.
+# client_cert: File path to client certificate file (PEM/DER)
+#       Full path should be used since working directory may change when
+#       wpa_supplicant is run in the background.
+#       Alternatively, a named configuration blob can be used by setting this
+#       to blob://<blob name>.
+# private_key: File path to client private key file (PEM/DER/PFX)
+#       When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+#       commented out. Both the private key and certificate will be read from
+#       the PKCS#12 file in this case. Full path should be used since working
+#       directory may change when wpa_supplicant is run in the background.
+#       Windows certificate store can be used by leaving client_cert out and
+#       configuring private_key in one of the following formats:
+#       cert://substring_to_match
+#       hash://certificate_thumbprint_in_hex
+#       for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
+#       Note that when running wpa_supplicant as an application, the user
+#       certificate store (My user account) is used, whereas computer store
+#       (Computer account) is used when running wpasvc as a service.
+#       Alternatively, a named configuration blob can be used by setting this
+#       to blob://<blob name>.
+# private_key_passwd: Password for private key file (if left out, this will be
+#       asked through control interface)
+# dh_file: File path to DH/DSA parameters file (in PEM format)
+#       This is an optional configuration file for setting parameters for an
+#       ephemeral DH key exchange. In most cases, the default RSA
+#       authentication does not use this configuration. However, it is possible
+#       setup RSA to use ephemeral DH key exchange. In addition, ciphers with
+#       DSA keys always use ephemeral DH keys. This can be used to achieve
+#       forward secrecy. If the file is in DSA parameters format, it will be
+#       automatically converted into DH params.
+# subject_match: Substring to be matched against the subject of the
+#       authentication server certificate. If this string is set, the server
+#       sertificate is only accepted if it contains this string in the subject.
+#       The subject string is in following format:
+#       /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
+# altsubject_match: Semicolon separated string of entries to be matched against
+#       the alternative subject name of the authentication server certificate.
+#       If this string is set, the server sertificate is only accepted if it
+#       contains one of the entries in an alternative subject name extension.
+#       altSubjectName string is in following format: TYPE:VALUE
+#       Example: EMAIL:server@example.com
+#       Example: DNS:server.example.com;DNS:server2.example.com
+#       Following types are supported: EMAIL, DNS, URI
+# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
+#       (string with field-value pairs, e.g., "peapver=0" or
+#       "peapver=1 peaplabel=1")
+#       'peapver' can be used to force which PEAP version (0 or 1) is used.
+#       'peaplabel=1' can be used to force new label, "client PEAP encryption",
+#       to be used during key derivation when PEAPv1 or newer. Most existing
+#       PEAPv1 implementation seem to be using the old label, "client EAP
+#       encryption", and wpa_supplicant is now using that as the default value.
+#       Some servers, e.g., Radiator, may require peaplabel=1 configuration to
+#       interoperate with PEAPv1; see eap_testing.txt for more details.
+#       'peap_outer_success=0' can be used to terminate PEAP authentication on
+#       tunneled EAP-Success. This is required with some RADIUS servers that
+#       implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
+#       Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
+#       include_tls_length=1 can be used to force wpa_supplicant to include
+#       TLS Message Length field in all TLS messages even if they are not
+#       fragmented.
+#       sim_min_num_chal=3 can be used to configure EAP-SIM to require three
+#       challenges (by default, it accepts 2 or 3)
+# phase2: Phase2 (inner authentication with TLS tunnel) parameters
+#       (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
+#       "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
+# Following certificate/private key fields are used in inner Phase2
+# authentication when using EAP-TTLS or EAP-PEAP.
+# ca_cert2: File path to CA certificate file. This file can have one or more
+#       trusted CA certificates. If ca_cert2 and ca_path2 are not included,
+#       server certificate will not be verified. This is insecure and a trusted
+#       CA certificate should always be configured.
+# ca_path2: Directory path for CA certificate files (PEM)
+# client_cert2: File path to client certificate file
+# private_key2: File path to client private key file
+# private_key2_passwd: Password for private key file
+# dh_file2: File path to DH/DSA parameters file (in PEM format)
+# subject_match2: Substring to be matched against the subject of the
+#       authentication server certificate.
+# altsubject_match2: Substring to be matched against the alternative subject
+#       name of the authentication server certificate.
+#
+# fragment_size: Maximum EAP fragment size in bytes (default 1398).
+#       This value limits the fragment size for EAP methods that support
+#       fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
+#       small enough to make the EAP messages fit in MTU of the network
+#       interface used for EAPOL. The default value is suitable for most
+#       cases.
+#
+# EAP-PSK variables:
+# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
+# nai: user NAI
+#
+# EAP-PAX variables:
+# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
+#
+# EAP-SAKE variables:
+# eappsk: 32-byte (256-bit, 64 hex digits) pre-shared key in hex format
+#       (this is concatenation of Root-Secret-A and Root-Secret-B)
+# nai: user NAI (PEERID)
+#
+# EAP-GPSK variables:
+# eappsk: Pre-shared key in hex format (at least 128 bits, i.e., 32 hex digits)
+# nai: user NAI (ID_Client)
+#
+# EAP-FAST variables:
+# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
+#       to create this file and write updates to it when PAC is being
+#       provisioned or refreshed. Full path to the file should be used since
+#       working directory may change when wpa_supplicant is run in the
+#       background. Alternatively, a named configuration blob can be used by
+#       setting this to blob://<blob name>
+# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST
+#       credentials (PAC)
+#
+# wpa_supplicant supports number of "EAP workarounds" to work around
+# interoperability issues with incorrectly behaving authentication servers.
+# These are enabled by default because some of the issues are present in large
+# number of authentication servers. Strict EAP conformance mode can be
+# configured by disabling workarounds with eap_workaround=0.
+
+# Example blocks:
+
+# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
+network={
+        ssid="simple"
+        psk="very secret passphrase"
+        priority=5
+}
+
+# Same as previous, but request SSID-specific scanning (for APs that reject
+# broadcast SSID)
+network={
+        ssid="second ssid"
+        scan_ssid=1
+        psk="very secret passphrase"
+        priority=2
+}
+
+# Only WPA-PSK is used. Any valid cipher combination is accepted.
+network={
+        ssid="example"
+        proto=WPA
+        key_mgmt=WPA-PSK
+        pairwise=CCMP TKIP
+        group=CCMP TKIP WEP104 WEP40
+        psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+        priority=2
+}
+
+# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
+# or WEP40 as the group cipher will not be accepted.
+network={
+        ssid="example"
+        proto=RSN
+        key_mgmt=WPA-EAP
+        pairwise=CCMP TKIP
+        group=CCMP TKIP
+        eap=TLS
+        identity="user@example.com"
+        ca_cert="/etc/cert/ca.pem"
+        client_cert="/etc/cert/user.pem"
+        private_key="/etc/cert/user.prv"
+        private_key_passwd="password"
+        priority=1
+}
+
+# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
+# (e.g., Radiator)
+network={
+        ssid="example"
+        key_mgmt=WPA-EAP
+        eap=PEAP
+        identity="user@example.com"
+        password="foobar"
+        ca_cert="/etc/cert/ca.pem"
+        phase1="peaplabel=1"
+        phase2="auth=MSCHAPV2"
+        priority=10
+}
+
+# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
+# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+        ssid="example"
+        key_mgmt=WPA-EAP
+        eap=TTLS
+        identity="user@example.com"
+        anonymous_identity="anonymous@example.com"
+        password="foobar"
+        ca_cert="/etc/cert/ca.pem"
+        priority=2
+}
+
+# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
+# use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+        ssid="example"
+        key_mgmt=WPA-EAP
+        eap=TTLS
+        identity="user@example.com"
+        anonymous_identity="anonymous@example.com"
+        password="foobar"
+        ca_cert="/etc/cert/ca.pem"
+        phase2="auth=MSCHAPV2"
+}
+
+# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
+# authentication.
+network={
+        ssid="example"
+        key_mgmt=WPA-EAP
+        eap=TTLS
+        # Phase1 / outer authentication
+        anonymous_identity="anonymous@example.com"
+        ca_cert="/etc/cert/ca.pem"
+        # Phase 2 / inner authentication
+        phase2="autheap=TLS"
+        ca_cert2="/etc/cert/ca2.pem"
+        client_cert2="/etc/cer/user.pem"
+        private_key2="/etc/cer/user.prv"
+        private_key2_passwd="password"
+        priority=2
+}
+
+# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
+# group cipher.
+network={
+        ssid="example"
+        bssid=00:11:22:33:44:55
+        proto=WPA RSN
+        key_mgmt=WPA-PSK WPA-EAP
+        pairwise=CCMP
+        group=CCMP
+        psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+}
+
+# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
+# and all valid ciphers.
+network={
+        ssid=00010203
+        psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
+}
+
+
+# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
+# EAP-TLS for authentication and key generation; require both unicast and
+# broadcast WEP keys.
+network={
+        ssid="1x-test"
+        key_mgmt=IEEE8021X
+        eap=TLS
+        identity="user@example.com"
+        ca_cert="/etc/cert/ca.pem"
+        client_cert="/etc/cert/user.pem"
+        private_key="/etc/cert/user.prv"
+        private_key_passwd="password"
+        eapol_flags=3
+}
+
+
+# LEAP with dynamic WEP keys
+network={
+        ssid="leap-example"
+        key_mgmt=IEEE8021X
+        eap=LEAP
+        identity="user"
+        password="foobar"
+}
+
+# Plaintext connection (no WPA, no IEEE 802.1X)
+network={
+        ssid="plaintext-test"
+        key_mgmt=NONE
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X)
+network={
+        ssid="static-wep-test"
+        key_mgmt=NONE
+        wep_key0="abcde"
+        wep_key1=0102030405
+        wep_key2="1234567890123"
+        wep_tx_keyidx=0
+        priority=5
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
+# IEEE 802.11 authentication
+network={
+        ssid="static-wep-test2"
+        key_mgmt=NONE
+        wep_key0="abcde"
+        wep_key1=0102030405
+        wep_key2="1234567890123"
+        wep_tx_keyidx=0
+        priority=5
+        auth_alg=SHARED
+}
+
+
+# IBSS/ad-hoc network with WPA-None/TKIP.
+network={
+        ssid="test adhoc"
+        mode=1
+        proto=WPA
+        key_mgmt=WPA-NONE
+        pairwise=NONE
+        group=TKIP
+        psk="secret passphrase"
+}
+
+
+# Catch all example that allows more or less all configuration modes
+network={
+        ssid="example"
+        scan_ssid=1
+        key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
+        pairwise=CCMP TKIP
+        group=CCMP TKIP WEP104 WEP40
+        psk="very secret passphrase"
+        eap=TTLS PEAP TLS
+        identity="user@example.com"
+        password="foobar"
+        ca_cert="/etc/cert/ca.pem"
+        client_cert="/etc/cert/user.pem"
+        private_key="/etc/cert/user.prv"
+        private_key_passwd="password"
+        phase1="peaplabel=0"
+}
+
+# Example of EAP-TLS with smartcard (openssl engine)
+network={
+        ssid="example"
+        key_mgmt=WPA-EAP
+        eap=TLS
+        proto=RSN
+        pairwise=CCMP TKIP
+        group=CCMP TKIP
+        identity="user@example.com"
+        ca_cert="/etc/cert/ca.pem"
+        client_cert="/etc/cert/user.pem"
+
+        engine=1
+
+        # The engine configured here must be available. Look at
+        # OpenSSL engine support in the global section.
+        # The key available through the engine must be the private key
+        # matching the client certificate configured above.
+
+        # use the opensc engine
+        #engine_id="opensc"
+        #key_id="45"
+
+        # use the pkcs11 engine
+        engine_id="pkcs11"
+        key_id="id_45"
+
+        # Optional PIN configuration; this can be left out and PIN will be
+        # asked through the control interface
+        pin="1234"
+}
+
+# Example configuration showing how to use an inlined blob as a CA certificate
+# data instead of using external file
+network={
+        ssid="example"
+        key_mgmt=WPA-EAP
+        eap=TTLS
+        identity="user@example.com"
+        anonymous_identity="anonymous@example.com"
+        password="foobar"
+        ca_cert="blob://exampleblob"
+        priority=20
+}
+
+blob-base64-exampleblob={
+SGVsbG8gV29ybGQhCg==
+}
+
+
+# Wildcard match for SSID (plaintext APs only). This example select any
+# open AP regardless of its SSID.
+network={
+        key_mgmt=NONE
+}
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant.conf-sane b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant.conf-sane
new file mode 100644
index 0000000000..c91ffe0c84
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant.conf-sane
@@ -0,0 +1,7 @@
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=0
+update_config=1
+
+network={
+        key_mgmt=NONE
+}
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant_default.conf b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant_default.conf
new file mode 100644
index 0000000000..8eebdeb5cb
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.2/wpa_supplicant_default.conf
@@ -0,0 +1,13 @@
+# This is a basic configuration for WPA with pre-shared keys (WPA-PSK)
+
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=0
+eapol_version=1
+ap_scan=1
+network={
+        ssid="YOUR_SSID"
+        psk="YOUR WPA PASSWORD IN HEX OR ASCII"
+        key_mgmt=WPA-PSK
+        pairwise=CCMP
+        priority=5
+}
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.inc b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.inc
new file mode 100644
index 0000000000..78ce914c31
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-0.7.inc
@@ -0,0 +1,75 @@
+DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
+HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
+BUGTRACKER = "http://hostap.epitest.fi/bugz/"
+SECTION = "network"
+LICENSE = "GPLv2 | BSD"
+LIC_FILES_CHKSUM = "file://../COPYING;md5=c54ce9345727175ff66d17b67ff51f58 \
+                    file://../README;md5=54cfc88015d3ce83f7156e63c6bb1738 \
+                    file://wpa_supplicant.c;beginline=1;endline=17;md5=acdc5a4b0d6345f21f136eace747260e"
+DEPENDS = "gnutls dbus"
+RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
+
+SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
+           file://defconfig-gnutls \
+           file://defaults-sane \
+           file://wpa-supplicant.sh \
+           file://wpa_supplicant.conf \
+           file://wpa_supplicant.conf-sane \
+           file://99_wpa_supplicant"
+
+S = "${WORKDIR}/wpa_supplicant-${PV}/wpa_supplicant"
+
+PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
+FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
+FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
+
+do_configure () {
+        install -m 0755 ${WORKDIR}/defconfig-gnutls .config
+}
+
+export EXTRA_CFLAGS = "${CFLAGS}"
+do_compile () {
+        unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+        oe_runmake
+}
+
+do_install () {
+        install -d ${D}${sbindir}
+        install -m 755 wpa_supplicant ${D}${sbindir}
+        install -m 755 wpa_passphrase ${D}${sbindir}
+        install -m 755 wpa_cli        ${D}${sbindir}
+
+        install -d ${D}${docdir}/wpa_supplicant
+        install -m 644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
+
+        install -d ${D}${sysconfdir}/default
+        install -m 600 ${WORKDIR}/defaults-sane ${D}${sysconfdir}/default/wpa
+        install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf
+
+        install -d ${D}${sysconfdir}/network/if-pre-up.d/
+        install -d ${D}${sysconfdir}/network/if-post-down.d/
+        install -d ${D}${sysconfdir}/network/if-down.d/
+        install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
+        install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant
+        cd ${D}${sysconfdir}/network/ && \
+        ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant
+
+        install -d ${D}/${sysconfdir}/dbus-1/system.d
+        install -m 644 ${S}/dbus/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d
+
+        install -d ${D}/etc/default/volatiles
+        install -m 0644 ${WORKDIR}/99_wpa_supplicant ${D}/etc/default/volatiles
+}
+
+pkg_postinst_wpa-supplicant () {
+        # can't do this offline
+        if [ "x$D" != "x" ]; then
+                exit 1
+        fi
+
+        DBUSPID=`pidof dbus-daemon`
+
+        if [ "x$DBUSPID" != "x" ]; then
+                /etc/init.d/dbus-1 reload
+        fi
+}
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_0.7.2.bb b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_0.7.2.bb
new file mode 100644
index 0000000000..d1f6c6d6c9
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_0.7.2.bb
@@ -0,0 +1,3 @@
+require wpa-supplicant-0.7.inc
+
+PR = "r1"