linux-moblin: Update patches

1 files changed, 714 insertions, 1997 deletions

diff --git a/meta-moblin/packages/linux/linux-moblin-2.6.28+2.6.29-rc2/psb-driver.patch b/meta-moblin/packages/linux/linux-moblin-2.6.28+2.6.29-rc2/psb-driver.patch
index c515bc60ce..ca449c6cf5 100644
--- a/meta-moblin/packages/linux/linux-moblin-2.6.28+2.6.29-rc2/psb-driver.patch
+++ b/meta-moblin/packages/linux/linux-moblin-2.6.28+2.6.29-rc2/psb-driver.patch
@@ -337,7 +337,7 @@ Index: linux-2.6.28/include/drm/drm.h
 Index: linux-2.6.28/include/drm/drmP.h
 ===================================================================
 --- linux-2.6.28.orig/include/drm/drmP.h        2009-02-12 09:14:40.000000000 +0000
-+++ linux-2.6.28/include/drm/drmP.h     2009-02-12 09:14:41.000000000 +0000
++++ linux-2.6.28/include/drm/drmP.h     2009-02-12 15:59:51.000000000 +0000
 @@ -57,6 +57,7 @@
  #include <linux/dma-mapping.h>
  #include <linux/mm.h>
@@ -638,16 +638,6 @@ Index: linux-2.6.28/include/drm/drmP.h
  
                                 /* AGP/GART support (drm_agpsupport.h) */
  extern struct drm_agp_head *drm_agp_init(struct drm_device *dev);
-@@ -1303,9 +1340,6 @@
- extern int drm_sysfs_device_add(struct drm_minor *minor);
- extern void drm_sysfs_hotplug_event(struct drm_device *dev);
- extern void drm_sysfs_device_remove(struct drm_minor *minor);
--extern char *drm_get_connector_status_name(enum drm_connector_status status);
--extern int drm_sysfs_connector_add(struct drm_connector *connector);
--extern void drm_sysfs_connector_remove(struct drm_connector *connector);
- 
- /*
-  * Basic memory manager support (drm_mm.c)
 Index: linux-2.6.28/include/drm/drm_pciids.h
 ===================================================================
 --- linux-2.6.28.orig/include/drm/drm_pciids.h  2009-02-12 09:14:31.000000000 +0000
@@ -665,8 +655,8 @@ Index: linux-2.6.28/include/drm/drm_pciids.h
 Index: linux-2.6.28/drivers/gpu/drm/Makefile
 ===================================================================
 --- linux-2.6.28.orig/drivers/gpu/drm/Makefile  2009-02-12 09:14:37.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/Makefile       2009-02-12 09:14:41.000000000 +0000
-@@ -10,8 +10,11 @@
++++ linux-2.6.28/drivers/gpu/drm/Makefile       2009-02-12 16:00:51.000000000 +0000
+@@ -10,6 +10,8 @@
                 drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \
                 drm_agpsupport.o drm_scatter.o ati_pcigart.o drm_pci.o \
                 drm_sysfs.o drm_hashtab.o drm_sman.o drm_mm.o \
@@ -674,11 +664,8 @@ Index: linux-2.6.28/drivers/gpu/drm/Makefile
 +               drm_bo_lock.o drm_bo_move.o drm_regman.o \
                 drm_crtc.o drm_crtc_helper.o drm_modes.o drm_edid.o
  
-+
  drm-$(CONFIG_COMPAT) += drm_ioc32.o
- 
- obj-$(CONFIG_DRM)      += drm.o
-@@ -22,6 +25,7 @@
+@@ -22,6 +24,7 @@
  obj-$(CONFIG_DRM_I810) += i810/
  obj-$(CONFIG_DRM_I830) += i830/
  obj-$(CONFIG_DRM_I915)  += i915/
@@ -7239,1908 +7226,6 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/Makefile
 +        psb_schedule.o psb_xhw.o
 +
 +obj-$(CONFIG_DRM_PSB) += psb.o
-Index: linux-2.6.28/drivers/gpu/drm/psb/i915_reg.h
-===================================================================
---- /dev/null   1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/psb/i915_reg.h 2009-02-12 09:14:41.000000000 +0000
-@@ -0,0 +1,67 @@
-+#include "../i915/i915_reg.h"
-+
-+
-+/*#define IS_I830(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82830_CGC)
-+#define IS_845G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82845G_IG)
-+#define IS_I85X(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
-+#define IS_I855(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
-+#define IS_I865G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82865_IG)
-+
-+#define IS_I915G(dev) (dev->pci_device == PCI_DEVICE_ID_INTEL_82915G_IG)
-+#define IS_I915GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82915GM_IG)
-+#define IS_I945G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945G_IG)
-+#define IS_I945GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945GM_IG)
-+
-+#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
-+                      (dev)->pci_device == 0x2982 || \
-+                      (dev)->pci_device == 0x2992 || \
-+                      (dev)->pci_device == 0x29A2 || \
-+                      (dev)->pci_device == 0x2A02 || \
-+                      (dev)->pci_device == 0x2A12)
-+
-+#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
-+
-+#define IS_G33(dev)    ((dev)->pci_device == 0x29C2 || \
-+                       (dev)->pci_device == 0x29B2 ||  \
-+                       (dev)->pci_device == 0x29D2)
-+
-+#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
-+                     IS_I945GM(dev) || IS_I965G(dev) || IS_POULSBO(dev))
-+
-+#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
-+                       IS_I945GM(dev) || IS_I965GM(dev) || IS_POULSBO(dev))
-+
-+#define IS_POULSBO(dev) (((dev)->pci_device == 0x8108) || \
-+                        ((dev)->pci_device == 0x8109))*/
-+
-+#define FPA0           0x06040
-+#define FPA1           0x06044
-+#define FPB0           0x06048
-+#define FPB1           0x0604c
-+#define FP_N_DIV_MASK                          0x003f0000
-+#define FP_N_DIV_SHIFT                         16
-+#define FP_M1_DIV_MASK                         0x00003f00
-+#define FP_M1_DIV_SHIFT                        8
-+#define FP_M2_DIV_MASK                         0x0000003f
-+#define FP_M2_DIV_SHIFT                        0
-+
-+#define DPLL_B_MD              0x06020
-+
-+#define ADPA                  0x61100
-+#define ADPA_DAC_ENABLE       (1<<31)
-+#define ADPA_DAC_DISABLE      0
-+#define ADPA_PIPE_SELECT_MASK (1<<30)
-+#define ADPA_PIPE_A_SELECT    0
-+#define ADPA_PIPE_B_SELECT    (1<<30)
-+#define ADPA_USE_VGA_HVPOLARITY (1<<15)
-+#define ADPA_SETS_HVPOLARITY  0
-+#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
-+#define ADPA_VSYNC_CNTL_ENABLE        0
-+#define ADPA_HSYNC_CNTL_DISABLE (1<<10)
-+#define ADPA_HSYNC_CNTL_ENABLE        0
-+#define ADPA_VSYNC_ACTIVE_HIGH        (1<<4)
-+#define ADPA_VSYNC_ACTIVE_LOW 0
-+#define ADPA_HSYNC_ACTIVE_HIGH        (1<<3)
-+#define ADPA_HSYNC_ACTIVE_LOW 0
-+
-+
-Index: linux-2.6.28/drivers/gpu/drm/psb/intel_display.c
-===================================================================
---- /dev/null   1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/psb/intel_display.c    2009-02-12 09:14:41.000000000 +0000
-@@ -0,0 +1,1813 @@
-+/*
-+ * Copyright © 2006-2007 Intel Corporation
-+ *
-+ * Permission is hereby granted, free of charge, to any person obtaining a
-+ * copy of this software and associated documentation files (the "Software"),
-+ * to deal in the Software without restriction, including without limitation
-+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
-+ * and/or sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following conditions:
-+ *
-+ * The above copyright notice and this permission notice (including the next
-+ * paragraph) shall be included in all copies or substantial portions of the
-+ * Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-+ * DEALINGS IN THE SOFTWARE.
-+ *
-+ * Authors:
-+ *     Eric Anholt <eric@anholt.net>
-+ */
-+
-+#include <linux/i2c.h>
-+#include "drmP.h"
-+#include "../i915/intel_drv.h"
-+#include "i915_drm.h"
-+#include "../i915/i915_drv.h"
-+
-+#include "drm_crtc_helper.h"
-+
-+bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
-+
-+typedef struct {
-+    /* given values */
-+    int n;
-+    int m1, m2;
-+    int p1, p2;
-+    /* derived values */
-+    int        dot;
-+    int        vco;
-+    int        m;
-+    int        p;
-+} intel_clock_t;
-+
-+typedef struct {
-+    int        min, max;
-+} intel_range_t;
-+
-+typedef struct {
-+    int        dot_limit;
-+    int        p2_slow, p2_fast;
-+} intel_p2_t;
-+
-+#define INTEL_P2_NUM                 2
-+
-+typedef struct {
-+    intel_range_t   dot, vco, n, m, m1, m2, p, p1;
-+    intel_p2_t     p2;
-+} intel_limit_t;
-+
-+#define I8XX_DOT_MIN             25000
-+#define I8XX_DOT_MAX            350000
-+#define I8XX_VCO_MIN            930000
-+#define I8XX_VCO_MAX           1400000
-+#define I8XX_N_MIN                   3
-+#define I8XX_N_MAX                  16
-+#define I8XX_M_MIN                  96
-+#define I8XX_M_MAX                 140
-+#define I8XX_M1_MIN                 18
-+#define I8XX_M1_MAX                 26
-+#define I8XX_M2_MIN                  6
-+#define I8XX_M2_MAX                 16
-+#define I8XX_P_MIN                   4
-+#define I8XX_P_MAX                 128
-+#define I8XX_P1_MIN                  2
-+#define I8XX_P1_MAX                 33
-+#define I8XX_P1_LVDS_MIN             1
-+#define I8XX_P1_LVDS_MAX             6
-+#define I8XX_P2_SLOW                 4
-+#define I8XX_P2_FAST                 2
-+#define I8XX_P2_LVDS_SLOW            14
-+#define I8XX_P2_LVDS_FAST            14 /* No fast option */
-+#define I8XX_P2_SLOW_LIMIT      165000
-+
-+#define I9XX_DOT_MIN             20000
-+#define I9XX_DOT_MAX            400000
-+#define I9XX_VCO_MIN           1400000
-+#define I9XX_VCO_MAX           2800000
-+#define I9XX_N_MIN                   3
-+#define I9XX_N_MAX                   8
-+#define I9XX_M_MIN                  70
-+#define I9XX_M_MAX                 120
-+#define I9XX_M1_MIN                 10
-+#define I9XX_M1_MAX                 20
-+#define I9XX_M2_MIN                  5
-+#define I9XX_M2_MAX                  9
-+#define I9XX_P_SDVO_DAC_MIN          5
-+#define I9XX_P_SDVO_DAC_MAX         80
-+#define I9XX_P_LVDS_MIN                      7
-+#define I9XX_P_LVDS_MAX                     98
-+#define I9XX_P1_MIN                  1
-+#define I9XX_P1_MAX                  8
-+#define I9XX_P2_SDVO_DAC_SLOW               10
-+#define I9XX_P2_SDVO_DAC_FAST                5
-+#define I9XX_P2_SDVO_DAC_SLOW_LIMIT     200000
-+#define I9XX_P2_LVDS_SLOW                   14
-+#define I9XX_P2_LVDS_FAST                    7
-+#define I9XX_P2_LVDS_SLOW_LIMIT                 112000
-+
-+#define INTEL_LIMIT_I8XX_DVO_DAC    0
-+#define INTEL_LIMIT_I8XX_LVDS      1
-+#define INTEL_LIMIT_I9XX_SDVO_DAC   2
-+#define INTEL_LIMIT_I9XX_LVDS      3
-+
-+static const intel_limit_t intel_limits[] = {
-+    { /* INTEL_LIMIT_I8XX_DVO_DAC */
-+        .dot = { .min = I8XX_DOT_MIN,          .max = I8XX_DOT_MAX },
-+        .vco = { .min = I8XX_VCO_MIN,          .max = I8XX_VCO_MAX },
-+        .n   = { .min = I8XX_N_MIN,            .max = I8XX_N_MAX },
-+        .m   = { .min = I8XX_M_MIN,            .max = I8XX_M_MAX },
-+        .m1  = { .min = I8XX_M1_MIN,           .max = I8XX_M1_MAX },
-+        .m2  = { .min = I8XX_M2_MIN,           .max = I8XX_M2_MAX },
-+        .p   = { .min = I8XX_P_MIN,            .max = I8XX_P_MAX },
-+        .p1  = { .min = I8XX_P1_MIN,           .max = I8XX_P1_MAX },
-+       .p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
-+                .p2_slow = I8XX_P2_SLOW,       .p2_fast = I8XX_P2_FAST },
-+    },
-+    { /* INTEL_LIMIT_I8XX_LVDS */
-+        .dot = { .min = I8XX_DOT_MIN,          .max = I8XX_DOT_MAX },
-+        .vco = { .min = I8XX_VCO_MIN,          .max = I8XX_VCO_MAX },
-+        .n   = { .min = I8XX_N_MIN,            .max = I8XX_N_MAX },
-+        .m   = { .min = I8XX_M_MIN,            .max = I8XX_M_MAX },
-+        .m1  = { .min = I8XX_M1_MIN,           .max = I8XX_M1_MAX },
-+        .m2  = { .min = I8XX_M2_MIN,           .max = I8XX_M2_MAX },
-+        .p   = { .min = I8XX_P_MIN,            .max = I8XX_P_MAX },
-+        .p1  = { .min = I8XX_P1_LVDS_MIN,      .max = I8XX_P1_LVDS_MAX },
-+       .p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
-+                .p2_slow = I8XX_P2_LVDS_SLOW,  .p2_fast = I8XX_P2_LVDS_FAST },
-+    },
-+    { /* INTEL_LIMIT_I9XX_SDVO_DAC */
-+        .dot = { .min = I9XX_DOT_MIN,          .max = I9XX_DOT_MAX },
-+        .vco = { .min = I9XX_VCO_MIN,          .max = I9XX_VCO_MAX },
-+        .n   = { .min = I9XX_N_MIN,            .max = I9XX_N_MAX },
-+        .m   = { .min = I9XX_M_MIN,            .max = I9XX_M_MAX },
-+        .m1  = { .min = I9XX_M1_MIN,           .max = I9XX_M1_MAX },
-+        .m2  = { .min = I9XX_M2_MIN,           .max = I9XX_M2_MAX },
-+        .p   = { .min = I9XX_P_SDVO_DAC_MIN,   .max = I9XX_P_SDVO_DAC_MAX },
-+        .p1  = { .min = I9XX_P1_MIN,           .max = I9XX_P1_MAX },
-+       .p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
-+                .p2_slow = I9XX_P2_SDVO_DAC_SLOW,      .p2_fast = I9XX_P2_SDVO_DAC_FAST },
-+    },
-+    { /* INTEL_LIMIT_I9XX_LVDS */
-+        .dot = { .min = I9XX_DOT_MIN,          .max = I9XX_DOT_MAX },
-+        .vco = { .min = I9XX_VCO_MIN,          .max = I9XX_VCO_MAX },
-+        .n   = { .min = I9XX_N_MIN,            .max = I9XX_N_MAX },
-+        .m   = { .min = I9XX_M_MIN,            .max = I9XX_M_MAX },
-+        .m1  = { .min = I9XX_M1_MIN,           .max = I9XX_M1_MAX },
-+        .m2  = { .min = I9XX_M2_MIN,           .max = I9XX_M2_MAX },
-+        .p   = { .min = I9XX_P_LVDS_MIN,       .max = I9XX_P_LVDS_MAX },
-+        .p1  = { .min = I9XX_P1_MIN,           .max = I9XX_P1_MAX },
-+       /* The single-channel range is 25-112Mhz, and dual-channel
-+        * is 80-224Mhz.  Prefer single channel as much as possible.
-+        */
-+       .p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
-+                .p2_slow = I9XX_P2_LVDS_SLOW,  .p2_fast = I9XX_P2_LVDS_FAST },
-+    },
-+};
-+
-+static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       const intel_limit_t *limit;
-+
-+       if (IS_I9XX(dev)) {
-+               if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-+                       limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
-+               else
-+                       limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
-+       } else {
-+               if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-+                       limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
-+               else
-+                       limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
-+       }
-+       return limit;
-+}
-+
-+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
-+
-+static void i8xx_clock(int refclk, intel_clock_t *clock)
-+{
-+       clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
-+       clock->p = clock->p1 * clock->p2;
-+       clock->vco = refclk * clock->m / (clock->n + 2);
-+       clock->dot = clock->vco / clock->p;
-+}
-+
-+/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
-+
-+static void i9xx_clock(int refclk, intel_clock_t *clock)
-+{
-+       clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
-+       clock->p = clock->p1 * clock->p2;
-+       clock->vco = refclk * clock->m / (clock->n + 2);
-+       clock->dot = clock->vco / clock->p;
-+}
-+
-+static void intel_clock(struct drm_device *dev, int refclk,
-+                       intel_clock_t *clock)
-+{
-+       if (IS_I9XX(dev))
-+               i9xx_clock (refclk, clock);
-+       else
-+               i8xx_clock (refclk, clock);
-+}
-+
-+/**
-+ * Returns whether any output on the specified pipe is of the specified type
-+ */
-+bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
-+{
-+    struct drm_device *dev = crtc->dev;
-+    struct drm_mode_config *mode_config = &dev->mode_config;
-+    struct drm_connector *l_entry;
-+
-+    list_for_each_entry(l_entry, &mode_config->connector_list, head) {
-+           if (l_entry->encoder &&
-+               l_entry->encoder->crtc == crtc) {
-+                   struct intel_output *intel_output = to_intel_output(l_entry);
-+                   if (intel_output->type == type)
-+                           return true;
-+           }
-+    }
-+    return false;
-+}
-+
-+#define INTELPllInvalid(s)   { /* ErrorF (s) */; return false; }
-+/**
-+ * Returns whether the given set of divisors are valid for a given refclk with
-+ * the given connectors.
-+ */
-+
-+static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock)
-+{
-+       const intel_limit_t *limit = intel_limit (crtc);
-+
-+       if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
-+               INTELPllInvalid ("p1 out of range\n");
-+       if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
-+               INTELPllInvalid ("p out of range\n");
-+       if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
-+               INTELPllInvalid ("m2 out of range\n");
-+       if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
-+               INTELPllInvalid ("m1 out of range\n");
-+       if (clock->m1 <= clock->m2)
-+               INTELPllInvalid ("m1 <= m2\n");
-+       if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
-+               INTELPllInvalid ("m out of range\n");
-+       if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
-+               INTELPllInvalid ("n out of range\n");
-+       if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
-+               INTELPllInvalid ("vco out of range\n");
-+       /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
-+        * connector, etc., rather than just a single range.
-+        */
-+       if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
-+               INTELPllInvalid ("dot out of range\n");
-+
-+       return true;
-+}
-+
-+/**
-+ * Returns a set of divisors for the desired target clock with the given
-+ * refclk, or FALSE.  The returned values represent the clock equation:
-+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
-+ */
-+static bool intel_find_best_PLL(struct drm_crtc *crtc, int target,
-+                               int refclk, intel_clock_t *best_clock)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       intel_clock_t clock;
-+       const intel_limit_t *limit = intel_limit(crtc);
-+       int err = target;
-+
-+       if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
-+           (I915_READ(LVDS) & LVDS_PORT_EN) != 0) {
-+               /*
-+                * For LVDS, if the panel is on, just rely on its current
-+                * settings for dual-channel.  We haven't figured out how to
-+                * reliably set up different single/dual channel state, if we
-+                * even can.
-+                */
-+               if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
-+                   LVDS_CLKB_POWER_UP)
-+                       clock.p2 = limit->p2.p2_fast;
-+               else
-+                       clock.p2 = limit->p2.p2_slow;
-+       } else {
-+               if (target < limit->p2.dot_limit)
-+                       clock.p2 = limit->p2.p2_slow;
-+               else
-+                       clock.p2 = limit->p2.p2_fast;
-+       }
-+
-+       memset (best_clock, 0, sizeof (*best_clock));
-+
-+       for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
-+               for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 &&
-+                            clock.m2 <= limit->m2.max; clock.m2++) {
-+                       for (clock.n = limit->n.min; clock.n <= limit->n.max;
-+                            clock.n++) {
-+                               for (clock.p1 = limit->p1.min;
-+                                    clock.p1 <= limit->p1.max; clock.p1++) {
-+                                       int this_err;
-+
-+                                       intel_clock(dev, refclk, &clock);
-+
-+                                       if (!intel_PLL_is_valid(crtc, &clock))
-+                                               continue;
-+
-+                                       this_err = abs(clock.dot - target);
-+                                       if (this_err < err) {
-+                                               *best_clock = clock;
-+                                               err = this_err;
-+                                       }
-+                               }
-+                       }
-+               }
-+       }
-+
-+       return (err != target);
-+}
-+
-+void
-+intel_wait_for_vblank(struct drm_device *dev)
-+{
-+       /* Wait for 20ms, i.e. one cycle at 50hz. */
-+       udelay(20000);
-+}
-+
-+static void
-+intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
-+                   struct drm_framebuffer *old_fb)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int pipe = intel_crtc->pipe;
-+       unsigned long Start, Offset;
-+       int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
-+       int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
-+       int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
-+       int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
-+       u32 dspcntr, alignment;
-+
-+       Start = crtc->fb->offset;
-+       Offset = y * crtc->fb->pitch + x;
-+
-+       DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
-+       if (IS_I965G(dev)) {
-+               I915_WRITE(dspbase, Offset);
-+               I915_READ(dspbase);
-+               I915_WRITE(dspsurf, Start);
-+               I915_READ(dspsurf);
-+       } else {
-+               I915_WRITE(dspbase, Start + Offset);
-+               I915_READ(dspbase);
-+       }
-+
-+
-+       if (!dev_priv->sarea_priv)
-+               return;
-+
-+       switch (pipe) {
-+       case 0:
-+               dev_priv->sarea_priv->pipeA_x = x;
-+               dev_priv->sarea_priv->pipeA_y = y;
-+               break;
-+       case 1:
-+               dev_priv->sarea_priv->pipeB_x = x;
-+               dev_priv->sarea_priv->pipeB_y = y;
-+               break;
-+       default:
-+               DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
-+               break;
-+       }
-+}
-+
-+
-+
-+/**
-+ * Sets the power management mode of the pipe and plane.
-+ *
-+ * This code should probably grow support for turning the cursor off and back
-+ * on appropriately at the same time as we're turning the pipe off/on.
-+ */
-+static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int pipe = intel_crtc->pipe;
-+       int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
-+       int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
-+       int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR;
-+       int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
-+       u32 temp;
-+       bool enabled;
-+
-+       /* XXX: When our outputs are all unaware of DPMS modes other than off
-+        * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
-+        */
-+       switch (mode) {
-+       case DRM_MODE_DPMS_ON:
-+       case DRM_MODE_DPMS_STANDBY:
-+       case DRM_MODE_DPMS_SUSPEND:
-+               /* Enable the DPLL */
-+               temp = I915_READ(dpll_reg);
-+               if ((temp & DPLL_VCO_ENABLE) == 0) {
-+                       I915_WRITE(dpll_reg, temp);
-+                       I915_READ(dpll_reg);
-+                       /* Wait for the clocks to stabilize. */
-+                       udelay(150);
-+                       I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
-+                       I915_READ(dpll_reg);
-+                       /* Wait for the clocks to stabilize. */
-+                       udelay(150);
-+                       I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
-+                       I915_READ(dpll_reg);
-+                       /* Wait for the clocks to stabilize. */
-+                       udelay(150);
-+               }
-+
-+               /* Enable the pipe */
-+               temp = I915_READ(pipeconf_reg);
-+               if ((temp & PIPEACONF_ENABLE) == 0)
-+                       I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
-+
-+               /* Enable the plane */
-+               temp = I915_READ(dspcntr_reg);
-+               if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
-+                       I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
-+                       /* Flush the plane changes */
-+                       I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
-+               }
-+
-+               intel_crtc_load_lut(crtc);
-+
-+               /* Give the overlay scaler a chance to enable if it's on this pipe */
-+               //intel_crtc_dpms_video(crtc, true); TODO
-+       break;
-+       case DRM_MODE_DPMS_OFF:
-+               /* Give the overlay scaler a chance to disable if it's on this pipe */
-+               //intel_crtc_dpms_video(crtc, FALSE); TODO
-+
-+               /* Disable the VGA plane that we never use */
-+               I915_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-+
-+               /* Disable display plane */
-+               temp = I915_READ(dspcntr_reg);
-+               if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
-+                       I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
-+                       /* Flush the plane changes */
-+                       I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
-+                       I915_READ(dspbase_reg);
-+               }
-+
-+               if (!IS_I9XX(dev)) {
-+                       /* Wait for vblank for the disable to take effect */
-+                       intel_wait_for_vblank(dev);
-+               }
-+
-+               /* Next, disable display pipes */
-+               temp = I915_READ(pipeconf_reg);
-+               if ((temp & PIPEACONF_ENABLE) != 0) {
-+                       I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
-+                       I915_READ(pipeconf_reg);
-+               }
-+
-+               /* Wait for vblank for the disable to take effect. */
-+               intel_wait_for_vblank(dev);
-+
-+               temp = I915_READ(dpll_reg);
-+               if ((temp & DPLL_VCO_ENABLE) != 0) {
-+                       I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
-+                       I915_READ(dpll_reg);
-+               }
-+
-+               /* Wait for the clocks to turn off. */
-+               udelay(150);
-+               break;
-+       }
-+
-+
-+       if (!dev_priv->sarea_priv)
-+               return;
-+
-+       enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
-+
-+       switch (pipe) {
-+       case 0:
-+               dev_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
-+               dev_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
-+               break;
-+       case 1:
-+               dev_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
-+               dev_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
-+               break;
-+       default:
-+               DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
-+               break;
-+       }
-+
-+       intel_crtc->dpms_mode = mode;
-+}
-+
-+static void intel_crtc_prepare (struct drm_crtc *crtc)
-+{
-+       struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
-+       crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
-+}
-+
-+static void intel_crtc_commit (struct drm_crtc *crtc)
-+{
-+       struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
-+       crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-+}
-+
-+void intel_encoder_prepare (struct drm_encoder *encoder)
-+{
-+       struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
-+       /* lvds has its own version of prepare see intel_lvds_prepare */
-+       encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
-+}
-+
-+void intel_encoder_commit (struct drm_encoder *encoder)
-+{
-+       struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
-+       /* lvds has its own version of commit see intel_lvds_commit */
-+       encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
-+}
-+
-+static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
-+                                 struct drm_display_mode *mode,
-+                                 struct drm_display_mode *adjusted_mode)
-+{
-+       return true;
-+}
-+
-+
-+/** Returns the core display clock speed for i830 - i945 */
-+static int intel_get_core_clock_speed(struct drm_device *dev)
-+{
-+
-+       /* Core clock values taken from the published datasheets.
-+        * The 830 may go up to 166 Mhz, which we should check.
-+        */
-+       if (IS_I945G(dev))
-+               return 400000;
-+       else if (IS_I915G(dev))
-+               return 333000;
-+       else if (IS_I945GM(dev) || IS_POULSBO(dev) || IS_845G(dev))
-+               return 200000;
-+       else if (IS_I915GM(dev)) {
-+               u16 gcfgc = 0;
-+
-+               pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-+
-+               if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
-+                       return 133000;
-+               else {
-+                       switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
-+                       case GC_DISPLAY_CLOCK_333_MHZ:
-+                               return 333000;
-+                       default:
-+                       case GC_DISPLAY_CLOCK_190_200_MHZ:
-+                               return 190000;
-+                       }
-+               }
-+       } else if (IS_I865G(dev))
-+               return 266000;
-+       else if (IS_I855(dev)) {
-+               u16 hpllcc = 0;
-+               /* Assume that the hardware is in the high speed state.  This
-+                * should be the default.
-+                */
-+               switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
-+               case GC_CLOCK_133_200:
-+               case GC_CLOCK_100_200:
-+                       return 200000;
-+               case GC_CLOCK_166_250:
-+                       return 250000;
-+               case GC_CLOCK_100_133:
-+                       return 133000;
-+               }
-+       } else /* 852, 830 */
-+               return 133000;
-+
-+       return 0; /* Silence gcc warning */
-+}
-+
-+
-+/**
-+ * Return the pipe currently connected to the panel fitter,
-+ * or -1 if the panel fitter is not present or not in use
-+ */
-+static int intel_panel_fitter_pipe (struct drm_device *dev)
-+{
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       u32  pfit_control;
-+
-+       /* i830 doesn't have a panel fitter */
-+       if (IS_I830(dev))
-+               return -1;
-+
-+       pfit_control = I915_READ(PFIT_CONTROL);
-+
-+       /* See if the panel fitter is in use */
-+       if ((pfit_control & PFIT_ENABLE) == 0)
-+               return -1;
-+
-+       /* 965 can place panel fitter on either pipe */
-+       if (IS_I965G(dev))
-+               return (pfit_control >> 29) & 0x3;
-+
-+       /* older chips can only use pipe 1 */
-+       return 1;
-+}
-+
-+#define WA_NO_FB_GARBAGE_DISPLAY
-+#ifdef WA_NO_FB_GARBAGE_DISPLAY
-+static u32 fp_reg_value[2];
-+static u32 dpll_reg_value[2];
-+static u32 dpll_md_reg_value[2];
-+static u32 dspcntr_reg_value[2];
-+static u32 pipeconf_reg_value[2];
-+static u32 htot_reg_value[2];
-+static u32 hblank_reg_value[2];
-+static u32 hsync_reg_value[2];
-+static u32 vtot_reg_value[2];
-+static u32 vblank_reg_value[2];
-+static u32 vsync_reg_value[2];
-+static u32 dspsize_reg_value[2];
-+static u32 dspstride_reg_value[2];
-+static u32 dsppos_reg_value[2];
-+static u32 pipesrc_reg_value[2];
-+
-+static u32 dspbase_value[2];
-+
-+static u32 lvds_reg_value[2];
-+static u32 vgacntrl_reg_value[2];
-+static u32 pfit_control_reg_value[2];
-+
-+#if 0
-+void intel_crtc_mode_restore(struct drm_crtc *crtc)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int pipe = intel_crtc->pipe;
-+       int fp_reg = (pipe == 0) ? FPA0 : FPB0;
-+       int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
-+       int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
-+       int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
-+       int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
-+       int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
-+       int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
-+       int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
-+       int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
-+       int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
-+       int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
-+       int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
-+       int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
-+       int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
-+       int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
-+       int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
-+
-+       bool ok, is_sdvo = false, is_dvo = false;
-+       bool is_crt = false, is_lvds = false, is_tv = false;
-+       struct drm_mode_config *mode_config = &dev->mode_config;
-+       struct drm_connector *output;
-+
-+       list_for_each_entry(output, &mode_config->connector_list, head) {
-+               struct intel_output *intel_output = to_intel_output(crtc);
-+
-+               if (output->crtc != crtc)
-+                       continue;
-+
-+               switch (intel_output->type) {
-+               case INTEL_OUTPUT_LVDS:
-+                       is_lvds = TRUE;
-+                       break;
-+               case INTEL_OUTPUT_SDVO:
-+                       is_sdvo = TRUE;
-+                       break;
-+               case INTEL_OUTPUT_DVO:
-+                       is_dvo = TRUE;
-+                       break;
-+               case INTEL_OUTPUT_TVOUT:
-+                       is_tv = TRUE;
-+                       break;
-+               case INTEL_OUTPUT_ANALOG:
-+                       is_crt = TRUE;
-+                       break;
-+               }
-+               if(is_lvds && ((lvds_reg_value[pipe] & LVDS_PORT_EN) == 0))
-+               {
-+                       printk("%s: is_lvds but not the boot display, so return\n",
-+                                                       __FUNCTION__);
-+                       return;
-+               }
-+               output->funcs->prepare(output);
-+       }
-+
-+       intel_crtc_prepare(crtc);
-+       /* Disable the panel fitter if it was on our pipe */
-+       if (intel_panel_fitter_pipe(dev) == pipe)
-+               I915_WRITE(PFIT_CONTROL, 0);
-+
-+       if (dpll_reg_value[pipe] & DPLL_VCO_ENABLE) {
-+               I915_WRITE(fp_reg, fp_reg_value[pipe]);
-+               I915_WRITE(dpll_reg, dpll_reg_value[pipe]& ~DPLL_VCO_ENABLE);
-+               I915_READ(dpll_reg);
-+               udelay(150);
-+       }
-+
-+       /*
-+       if(is_lvds)
-+               I915_WRITE(LVDS, lvds_reg_value[pipe]);
-+       */
-+       if (is_lvds) {
-+               I915_WRITE(LVDS, lvds_reg_value[pipe]);
-+               I915_READ(LVDS);
-+       }
-+
-+       I915_WRITE(fp_reg, fp_reg_value[pipe]);
-+       I915_WRITE(dpll_reg, dpll_reg_value[pipe]);
-+       I915_READ(dpll_reg);
-+       udelay(150);
-+       //I915_WRITE(dpll_md_reg, dpll_md_reg_value[pipe]);
-+       I915_WRITE(dpll_reg, dpll_reg_value[pipe]);
-+       I915_READ(dpll_reg);
-+       udelay(150);
-+       I915_WRITE(htot_reg, htot_reg_value[pipe]);
-+       I915_WRITE(hblank_reg, hblank_reg_value[pipe]);
-+       I915_WRITE(hsync_reg, hsync_reg_value[pipe]);
-+       I915_WRITE(vtot_reg, vtot_reg_value[pipe]);
-+       I915_WRITE(vblank_reg, vblank_reg_value[pipe]);
-+       I915_WRITE(vsync_reg, vsync_reg_value[pipe]);
-+       I915_WRITE(dspstride_reg, dspstride_reg_value[pipe]);
-+       I915_WRITE(dspsize_reg, dspsize_reg_value[pipe]);
-+       I915_WRITE(dsppos_reg, dsppos_reg_value[pipe]);
-+       I915_WRITE(pipesrc_reg, pipesrc_reg_value[pipe]);
-+       I915_WRITE(pipeconf_reg, pipeconf_reg_value[pipe]);
-+       I915_READ(pipeconf_reg);
-+       intel_wait_for_vblank(dev);
-+       I915_WRITE(dspcntr_reg, dspcntr_reg_value[pipe]);
-+       I915_WRITE(dspbase, dspbase_value[pipe]);
-+       I915_READ(dspbase);
-+       I915_WRITE(VGACNTRL, vgacntrl_reg_value[pipe]);
-+       intel_wait_for_vblank(dev);
-+       I915_WRITE(PFIT_CONTROL, pfit_control_reg_value[pipe]);
-+
-+       intel_crtc_commit(crtc);
-+       list_for_each_entry(output, &mode_config->connector_list, head) {
-+               if (output->crtc != crtc)
-+                       continue;
-+
-+               output->funcs->commit(output);
-+               //output->funcs->dpms(output, DRM_MODE_DPMS_OFF);
-+               //printk("turn off the display first\n");
-+       }
-+       return;
-+}
-+
-+void intel_crtc_mode_save(struct drm_crtc *crtc)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int pipe = intel_crtc->pipe;
-+       int fp_reg = (pipe == 0) ? FPA0 : FPB0;
-+       int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
-+       int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
-+       int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
-+       int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
-+       int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
-+       int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
-+       int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
-+       int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
-+       int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
-+       int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
-+       int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
-+       int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
-+       int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
-+       int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
-+       int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
-+       bool ok, is_sdvo = false, is_dvo = false;
-+       bool is_crt = false, is_lvds = false, is_tv = false;
-+       struct drm_mode_config *mode_config = &dev->mode_config;
-+       struct drm_connector *output;
-+
-+       list_for_each_entry(output, &mode_config->connector_list, head) {
-+               struct intel_output *intel_output = to_intel_output(crtc);
-+
-+               if (output->crtc != crtc)
-+                       continue;
-+
-+               switch (intel_output->type) {
-+               case INTEL_OUTPUT_LVDS:
-+                       is_lvds = TRUE;
-+                       break;
-+               case INTEL_OUTPUT_SDVO:
-+                       is_sdvo = TRUE;
-+                       break;
-+               case INTEL_OUTPUT_DVO:
-+                       is_dvo = TRUE;
-+                       break;
-+               case INTEL_OUTPUT_TVOUT:
-+                       is_tv = TRUE;
-+                       break;
-+               case INTEL_OUTPUT_ANALOG:
-+                       is_crt = TRUE;
-+                       break;
-+               }
-+       }
-+
-+       fp_reg_value[pipe] = I915_READ(fp_reg);
-+       dpll_reg_value[pipe] = I915_READ(dpll_reg);
-+       dpll_md_reg_value[pipe] = I915_READ(dpll_md_reg);
-+       dspcntr_reg_value[pipe] = I915_READ(dspcntr_reg);
-+       pipeconf_reg_value[pipe] = I915_READ(pipeconf_reg);
-+       htot_reg_value[pipe] = I915_READ(htot_reg);
-+       hblank_reg_value[pipe] = I915_READ(hblank_reg);
-+       hsync_reg_value[pipe] = I915_READ(hsync_reg);
-+       vtot_reg_value[pipe] = I915_READ(vtot_reg);
-+       vblank_reg_value[pipe] = I915_READ(vblank_reg);
-+       vsync_reg_value[pipe] = I915_READ(vsync_reg);
-+       dspsize_reg_value[pipe] = I915_READ(dspsize_reg);
-+       dspstride_reg_value[pipe] = I915_READ(dspstride_reg);
-+       dsppos_reg_value[pipe] = I915_READ(dsppos_reg);
-+       pipesrc_reg_value[pipe] = I915_READ(pipesrc_reg);
-+       dspbase_value[pipe] = I915_READ(dspbase);
-+       if(is_lvds)
-+               lvds_reg_value[pipe] = I915_READ(LVDS);
-+       vgacntrl_reg_value[pipe] = I915_READ(VGACNTRL);
-+       pfit_control_reg_value[pipe] = I915_READ(PFIT_CONTROL);
-+}
-+#endif
-+#endif
-+static void intel_crtc_mode_set(struct drm_crtc *crtc,
-+                               struct drm_display_mode *mode,
-+                               struct drm_display_mode *adjusted_mode,
-+                               int x, int y,
-+                               struct drm_framebuffer *old_fb)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int pipe = intel_crtc->pipe;
-+       int fp_reg = (pipe == 0) ? FPA0 : FPB0;
-+       int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
-+       int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
-+       int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
-+       int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
-+       int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
-+       int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
-+       int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
-+       int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
-+       int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
-+       int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
-+       int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
-+       int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
-+       int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
-+       int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
-+       int refclk;
-+       intel_clock_t clock;
-+       u32 dpll = 0, fp = 0, dspcntr, pipeconf;
-+       bool ok, is_sdvo = false, is_dvo = false;
-+       bool is_crt = false, is_lvds = false, is_tv = false;
-+       struct drm_mode_config *mode_config = &dev->mode_config;
-+       struct drm_connector *connector;
-+
-+       if (!crtc->fb) {
-+               DRM_ERROR("Can't set mode without attached fb\n");
-+               return;
-+       }
-+
-+       list_for_each_entry(connector, &mode_config->connector_list, head) {
-+               struct intel_output *intel_output = to_intel_output(connector);
-+
-+               if (!connector->encoder || connector->encoder->crtc != crtc)
-+                       continue;
-+
-+               switch (intel_output->type) {
-+               case INTEL_OUTPUT_LVDS:
-+                       is_lvds = true;
-+                       break;
-+               case INTEL_OUTPUT_SDVO:
-+               case INTEL_OUTPUT_HDMI:
-+                       is_sdvo = true;
-+                       break;
-+               case INTEL_OUTPUT_DVO:
-+                       is_dvo = true;
-+                       break;
-+               case INTEL_OUTPUT_TVOUT:
-+                       is_tv = true;
-+                       break;
-+               case INTEL_OUTPUT_ANALOG:
-+                       is_crt = true;
-+                       break;
-+               }
-+       }
-+
-+       if (IS_I9XX(dev)) {
-+               refclk = 96000;
-+       } else {
-+               refclk = 48000;
-+       }
-+
-+       ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock);
-+       if (!ok) {
-+               DRM_ERROR("Couldn't find PLL settings for mode!\n");
-+               return;
-+       }
-+
-+       fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
-+
-+       dpll = DPLL_VGA_MODE_DIS;
-+       if (IS_I9XX(dev)) {
-+               if (is_lvds) {
-+                       dpll |= DPLLB_MODE_LVDS;
-+                       if (IS_POULSBO(dev))
-+                               dpll |= DPLL_DVO_HIGH_SPEED;
-+               } else
-+                       dpll |= DPLLB_MODE_DAC_SERIAL;
-+               if (is_sdvo) {
-+                       dpll |= DPLL_DVO_HIGH_SPEED;
-+                       if (IS_I945G(dev) || IS_I945GM(dev) || IS_POULSBO(dev)) {
-+                               int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
-+                               dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
-+                       }
-+               }
-+
-+               /* compute bitmask from p1 value */
-+               dpll |= (1 << (clock.p1 - 1)) << 16;
-+               switch (clock.p2) {
-+               case 5:
-+                       dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
-+                       break;
-+               case 7:
-+                       dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
-+                       break;
-+               case 10:
-+                       dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
-+                       break;
-+               case 14:
-+                       dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
-+                       break;
-+               }
-+               if (IS_I965G(dev))
-+                       dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
-+       } else {
-+               if (is_lvds) {
-+                       dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
-+               } else {
-+                       if (clock.p1 == 2)
-+                               dpll |= PLL_P1_DIVIDE_BY_TWO;
-+                       else
-+                               dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
-+                       if (clock.p2 == 4)
-+                               dpll |= PLL_P2_DIVIDE_BY_4;
-+               }
-+       }
-+
-+       if (is_tv) {
-+               /* XXX: just matching BIOS for now */
-+/*     dpll |= PLL_REF_INPUT_TVCLKINBC; */
-+               dpll |= 3;
-+       }
-+       else
-+               dpll |= PLL_REF_INPUT_DREFCLK;
-+
-+       /* setup pipeconf */
-+       pipeconf = I915_READ(pipeconf_reg);
-+
-+       /* Set up the display plane register */
-+       dspcntr = DISPPLANE_GAMMA_ENABLE;
-+
-+       switch (crtc->fb->bits_per_pixel) {
-+       case 8:
-+               dspcntr |= DISPPLANE_8BPP;
-+               break;
-+       case 16:
-+               if (crtc->fb->depth == 15)
-+                       dspcntr |= DISPPLANE_15_16BPP;
-+               else
-+                       dspcntr |= DISPPLANE_16BPP;
-+               break;
-+       case 32:
-+               dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
-+               break;
-+       default:
-+               DRM_ERROR("Unknown color depth\n");
-+               return;
-+       }
-+
-+
-+       if (pipe == 0)
-+               dspcntr |= DISPPLANE_SEL_PIPE_A;
-+       else
-+               dspcntr |= DISPPLANE_SEL_PIPE_B;
-+
-+       if (pipe == 0 && !IS_I965G(dev)) {
-+               /* Enable pixel doubling when the dot clock is > 90% of the (display)
-+                * core speed.
-+                *
-+                * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
-+                * pipe == 0 check?
-+                */
-+               if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10)
-+                       pipeconf |= PIPEACONF_DOUBLE_WIDE;
-+               else
-+                       pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
-+       }
-+
-+       dspcntr |= DISPLAY_PLANE_ENABLE;
-+       pipeconf |= PIPEACONF_ENABLE;
-+       dpll |= DPLL_VCO_ENABLE;
-+
-+
-+       /* Disable the panel fitter if it was on our pipe */
-+       if (intel_panel_fitter_pipe(dev) == pipe)
-+               I915_WRITE(PFIT_CONTROL, 0);
-+
-+       DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
-+       drm_mode_debug_printmodeline(mode);
-+
-+
-+       if (dpll & DPLL_VCO_ENABLE) {
-+               I915_WRITE(fp_reg, fp);
-+               I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
-+               I915_READ(dpll_reg);
-+               udelay(150);
-+       }
-+
-+       /* The LVDS pin pair needs to be on before the DPLLs are enabled.
-+        * This is an exception to the general rule that mode_set doesn't turn
-+        * things on.
-+        */
-+       if (is_lvds) {
-+               u32 lvds = I915_READ(LVDS);
-+
-+               lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
-+               /* Set the B0-B3 data pairs corresponding to whether we're going to
-+                * set the DPLLs for dual-channel mode or not.
-+                */
-+               if (clock.p2 == 7)
-+                       lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-+               else
-+                       lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-+
-+               /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
-+                * appropriately here, but we need to look more thoroughly into how
-+                * panels behave in the two modes.
-+                */
-+
-+               I915_WRITE(LVDS, lvds);
-+               I915_READ(LVDS);
-+       }
-+
-+       I915_WRITE(fp_reg, fp);
-+       I915_WRITE(dpll_reg, dpll);
-+       I915_READ(dpll_reg);
-+       /* Wait for the clocks to stabilize. */
-+       udelay(150);
-+
-+       if (IS_I965G(dev)) {
-+               int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
-+               I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
-+                          ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
-+       } else {
-+               /* write it again -- the BIOS does, after all */
-+               I915_WRITE(dpll_reg, dpll);
-+       }
-+       I915_READ(dpll_reg);
-+       /* Wait for the clocks to stabilize. */
-+       udelay(150);
-+
-+       I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
-+                  ((adjusted_mode->crtc_htotal - 1) << 16));
-+       I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
-+                  ((adjusted_mode->crtc_hblank_end - 1) << 16));
-+       I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
-+                  ((adjusted_mode->crtc_hsync_end - 1) << 16));
-+       I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
-+                  ((adjusted_mode->crtc_vtotal - 1) << 16));
-+       I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
-+                  ((adjusted_mode->crtc_vblank_end - 1) << 16));
-+       I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
-+                  ((adjusted_mode->crtc_vsync_end - 1) << 16));
-+       I915_WRITE(dspstride_reg, crtc->fb->pitch);
-+       /* pipesrc and dspsize control the size that is scaled from, which should
-+        * always be the user's requested size.
-+        */
-+       I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
-+       I915_WRITE(dsppos_reg, 0);
-+       I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
-+       I915_WRITE(pipeconf_reg, pipeconf);
-+       I915_READ(pipeconf_reg);
-+
-+       intel_wait_for_vblank(dev);
-+
-+       I915_WRITE(dspcntr_reg, dspcntr);
-+
-+       /* Flush the plane changes */
-+       intel_pipe_set_base(crtc, x, y, old_fb);
-+
-+       intel_wait_for_vblank(dev);
-+}
-+
-+/** Loads the palette/gamma unit for the CRTC with the prepared values */
-+void intel_crtc_load_lut(struct drm_crtc *crtc)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B;
-+       int i;
-+
-+       /* The clocks have to be on to load the palette. */
-+       if (!crtc->enabled)
-+               return;
-+
-+       for (i = 0; i < 256; i++) {
-+               I915_WRITE(palreg + 4 * i,
-+                          (intel_crtc->lut_r[i] << 16) |
-+                          (intel_crtc->lut_g[i] << 8) |
-+                          intel_crtc->lut_b[i]);
-+       }
-+}
-+
-+static int intel_crtc_cursor_set(struct drm_crtc *crtc,
-+                                struct drm_file *file_priv,
-+                                uint32_t handle,
-+                                uint32_t width, uint32_t height)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       struct drm_gem_object *bo;
-+       struct drm_i915_gem_object *obj_priv;
-+       int pipe = intel_crtc->pipe;
-+       uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
-+       uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
-+       uint32_t temp;
-+       size_t addr;
-+       int ret;
-+
-+       DRM_DEBUG("\n");
-+
-+       /* if we want to turn off the cursor ignore width and height */
-+       if (!handle) {
-+               DRM_DEBUG("cursor off\n");
-+               temp = CURSOR_MODE_DISABLE;
-+               addr = 0;
-+               bo = NULL;
-+               goto finish;
-+       }
-+
-+       /* Currently we only support 64x64 cursors */
-+       if (width != 64 || height != 64) {
-+               DRM_ERROR("we currently only support 64x64 cursors\n");
-+               return -EINVAL;
-+       }
-+
-+       bo = drm_gem_object_lookup(dev, file_priv, handle);
-+       if (!bo)
-+               return -ENOENT;
-+
-+       obj_priv = bo->driver_private;
-+
-+       if (bo->size < width * height * 4) {
-+               DRM_ERROR("buffer is to small\n");
-+               ret = -ENOMEM;
-+               goto fail;
-+       }
-+#if 0
-+       /* we only need to pin inside GTT if cursor is non-phy */
-+       if (!dev_priv->cursor_needs_physical) {
-+               ret = i915_gem_object_pin(bo, PAGE_SIZE);
-+               if (ret) {
-+                       DRM_ERROR("failed to pin cursor bo\n");
-+                       goto fail;
-+               }
-+               addr = obj_priv->gtt_offset;
-+       } else {
-+               ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
-+               if (ret) {
-+                       DRM_ERROR("failed to attach phys object\n");
-+                       goto fail;
-+               }
-+               addr = obj_priv->phys_obj->handle->busaddr;
-+       }
-+#endif
-+       temp = 0;
-+       /* set the pipe for the cursor */
-+       temp |= (pipe << 28);
-+       temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
-+
-+ finish:
-+       I915_WRITE(control, temp);
-+       I915_WRITE(base, addr);
-+
-+       if (intel_crtc->cursor_bo) {
-+#if 0
-+               if (dev_priv->cursor_needs_physical) {
-+                       if (intel_crtc->cursor_bo != bo)
-+                               i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
-+               } else
-+                       i915_gem_object_unpin(intel_crtc->cursor_bo);
-+               mutex_lock(&dev->struct_mutex);
-+               drm_gem_object_unreference(intel_crtc->cursor_bo);
-+               mutex_unlock(&dev->struct_mutex);
-+#endif
-+       }
-+
-+       intel_crtc->cursor_addr = addr;
-+       intel_crtc->cursor_bo = bo;
-+
-+       return 0;
-+fail:
-+       mutex_lock(&dev->struct_mutex);
-+       drm_gem_object_unreference(bo);
-+       mutex_unlock(&dev->struct_mutex);
-+       return ret;
-+}
-+
-+static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
-+{
-+       struct drm_device *dev = crtc->dev;
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int pipe = intel_crtc->pipe;
-+       uint32_t temp = 0;
-+       uint32_t adder;
-+
-+       if (x < 0) {
-+               temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
-+               x = -x;
-+       }
-+       if (y < 0) {
-+               temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
-+               y = -y;
-+       }
-+
-+       temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
-+       temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
-+
-+       adder = intel_crtc->cursor_addr;
-+       I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
-+       I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
-+
-+       return 0;
-+}
-+
-+/** Sets the color ramps on behalf of RandR */
-+void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
-+                                u16 blue, int regno)
-+{
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+
-+       intel_crtc->lut_r[regno] = red >> 8;
-+       intel_crtc->lut_g[regno] = green >> 8;
-+       intel_crtc->lut_b[regno] = blue >> 8;
-+}
-+
-+static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
-+                                u16 *blue, uint32_t size)
-+{
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int i;
-+
-+       if (size != 256)
-+               return;
-+
-+       for (i = 0; i < 256; i++) {
-+               intel_crtc->lut_r[i] = red[i] >> 8;
-+               intel_crtc->lut_g[i] = green[i] >> 8;
-+               intel_crtc->lut_b[i] = blue[i] >> 8;
-+       }
-+
-+       intel_crtc_load_lut(crtc);
-+}
-+
-+/**
-+ * Get a pipe with a simple mode set on it for doing load-based monitor
-+ * detection.
-+ *
-+ * It will be up to the load-detect code to adjust the pipe as appropriate for
-+ * its requirements.  The pipe will be connected to no other outputs.
-+ *
-+ * Currently this code will only succeed if there is a pipe with no outputs
-+ * configured for it.  In the future, it could choose to temporarily disable
-+ * some outputs to free up a pipe for its use.
-+ *
-+ * \return crtc, or NULL if no pipes are available.
-+ */
-+
-+/* VESA 640x480x72Hz mode to set on the pipe */
-+static struct drm_display_mode load_detect_mode = {
-+       DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
-+                704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
-+};
-+
-+struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
-+                                           struct drm_display_mode *mode,
-+                                           int *dpms_mode)
-+{
-+       struct intel_crtc *intel_crtc;
-+       struct drm_crtc *possible_crtc;
-+       struct drm_crtc *supported_crtc =NULL;
-+       struct drm_encoder *encoder = &intel_output->enc;
-+       struct drm_crtc *crtc = NULL;
-+       struct drm_device *dev = encoder->dev;
-+       struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
-+       struct drm_crtc_helper_funcs *crtc_funcs;
-+       int i = -1;
-+
-+       /*
-+        * Algorithm gets a little messy:
-+        *   - if the connector already has an assigned crtc, use it (but make
-+        *     sure it's on first)
-+        *   - try to find the first unused crtc that can drive this connector,
-+        *     and use that if we find one
-+        *   - if there are no unused crtcs available, try to use the first
-+        *     one we found that supports the connector
-+        */
-+
-+       /* See if we already have a CRTC for this connector */
-+       if (encoder->crtc) {
-+               crtc = encoder->crtc;
-+               /* Make sure the crtc and connector are running */
-+               intel_crtc = to_intel_crtc(crtc);
-+               *dpms_mode = intel_crtc->dpms_mode;
-+               if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
-+                       crtc_funcs = crtc->helper_private;
-+                       crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-+                       encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
-+               }
-+               return crtc;
-+       }
-+
-+       /* Find an unused one (if possible) */
-+       list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
-+               i++;
-+               if (!(encoder->possible_crtcs & (1 << i)))
-+                       continue;
-+               if (!possible_crtc->enabled) {
-+                       crtc = possible_crtc;
-+                       break;
-+               }
-+               if (!supported_crtc)
-+                       supported_crtc = possible_crtc;
-+       }
-+
-+       /*
-+        * If we didn't find an unused CRTC, don't use any.
-+        */
-+       if (!crtc) {
-+               return NULL;
-+       }
-+
-+       encoder->crtc = crtc;
-+       intel_output->load_detect_temp = true;
-+
-+       intel_crtc = to_intel_crtc(crtc);
-+       *dpms_mode = intel_crtc->dpms_mode;
-+
-+       if (!crtc->enabled) {
-+               if (!mode)
-+                       mode = &load_detect_mode;
-+               drm_crtc_helper_set_mode(crtc, mode, 0, 0, crtc->fb);
-+       } else {
-+               if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
-+                       crtc_funcs = crtc->helper_private;
-+                       crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-+               }
-+
-+               /* Add this connector to the crtc */
-+               encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode);
-+               encoder_funcs->commit(encoder);
-+       }
-+       /* let the connector get through one full cycle before testing */
-+       intel_wait_for_vblank(dev);
-+
-+       return crtc;
-+}
-+
-+void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_mode)
-+{
-+       struct drm_encoder *encoder = &intel_output->enc;
-+       struct drm_device *dev = encoder->dev;
-+       struct drm_crtc *crtc = encoder->crtc;
-+       struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
-+       struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
-+
-+       if (intel_output->load_detect_temp) {
-+               encoder->crtc = NULL;
-+               intel_output->load_detect_temp = false;
-+               crtc->enabled = drm_helper_crtc_in_use(crtc);
-+               drm_helper_disable_unused_functions(dev);
-+       }
-+
-+       /* Switch crtc and output back off if necessary */
-+       if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) {
-+               if (encoder->crtc == crtc)
-+                       encoder_funcs->dpms(encoder, dpms_mode);
-+               crtc_funcs->dpms(crtc, dpms_mode);
-+       }
-+}
-+
-+/* Returns the clock of the currently programmed mode of the given pipe. */
-+static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
-+{
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int pipe = intel_crtc->pipe;
-+       u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B);
-+       u32 fp;
-+       intel_clock_t clock;
-+
-+       if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
-+               fp = I915_READ((pipe == 0) ? FPA0 : FPB0);
-+       else
-+               fp = I915_READ((pipe == 0) ? FPA1 : FPB1);
-+
-+       clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
-+       clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
-+       clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
-+       if (IS_I9XX(dev)) {
-+               clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
-+                              DPLL_FPA01_P1_POST_DIV_SHIFT);
-+
-+               switch (dpll & DPLL_MODE_MASK) {
-+               case DPLLB_MODE_DAC_SERIAL:
-+                       clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
-+                               5 : 10;
-+                       break;
-+               case DPLLB_MODE_LVDS:
-+                       clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
-+                               7 : 14;
-+                       break;
-+               default:
-+                       DRM_DEBUG("Unknown DPLL mode %08x in programmed "
-+                                 "mode\n", (int)(dpll & DPLL_MODE_MASK));
-+                       return 0;
-+               }
-+
-+               /* XXX: Handle the 100Mhz refclk */
-+               i9xx_clock(96000, &clock);
-+       } else {
-+               bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
-+
-+               if (is_lvds) {
-+                       clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
-+                                      DPLL_FPA01_P1_POST_DIV_SHIFT);
-+                       clock.p2 = 14;
-+
-+                       if ((dpll & PLL_REF_INPUT_MASK) ==
-+                           PLLB_REF_INPUT_SPREADSPECTRUMIN) {
-+                               /* XXX: might not be 66MHz */
-+                               i8xx_clock(66000, &clock);
-+                       } else
-+                               i8xx_clock(48000, &clock);
-+               } else {
-+                       if (dpll & PLL_P1_DIVIDE_BY_TWO)
-+                               clock.p1 = 2;
-+                       else {
-+                               clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
-+                                           DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
-+                       }
-+                       if (dpll & PLL_P2_DIVIDE_BY_4)
-+                               clock.p2 = 4;
-+                       else
-+                               clock.p2 = 2;
-+
-+                       i8xx_clock(48000, &clock);
-+               }
-+       }
-+
-+       /* XXX: It would be nice to validate the clocks, but we can't reuse
-+        * i830PllIsValid() because it relies on the xf86_config connector
-+        * configuration being accurate, which it isn't necessarily.
-+        */
-+
-+       return clock.dot;
-+}
-+
-+/** Returns the currently programmed mode of the given pipe. */
-+struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
-+                                            struct drm_crtc *crtc)
-+{
-+       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+       int pipe = intel_crtc->pipe;
-+       struct drm_display_mode *mode;
-+       int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
-+       int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
-+       int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
-+       int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
-+
-+       mode = kzalloc(sizeof(*mode), GFP_KERNEL);
-+       if (!mode)
-+               return NULL;
-+
-+       mode->clock = intel_crtc_clock_get(dev, crtc);
-+       mode->hdisplay = (htot & 0xffff) + 1;
-+       mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
-+       mode->hsync_start = (hsync & 0xffff) + 1;
-+       mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
-+       mode->vdisplay = (vtot & 0xffff) + 1;
-+       mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
-+       mode->vsync_start = (vsync & 0xffff) + 1;
-+       mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
-+
-+       drm_mode_set_name(mode);
-+       drm_mode_set_crtcinfo(mode, 0);
-+
-+       return mode;
-+}
-+
-+static void intel_crtc_destroy(struct drm_crtc *crtc)
-+{
-+       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+
-+       drm_crtc_cleanup(crtc);
-+       kfree(intel_crtc);
-+}
-+
-+static const struct drm_crtc_helper_funcs intel_helper_funcs = {
-+       .dpms = intel_crtc_dpms,
-+       .mode_fixup = intel_crtc_mode_fixup,
-+       .mode_set = intel_crtc_mode_set,
-+       .mode_set_base = intel_pipe_set_base,
-+       .prepare = intel_crtc_prepare,
-+       .commit = intel_crtc_commit,
-+};
-+
-+static const struct drm_crtc_funcs intel_crtc_funcs = {
-+       .cursor_set = intel_crtc_cursor_set,
-+       .cursor_move = intel_crtc_cursor_move,
-+       .gamma_set = intel_crtc_gamma_set,
-+       .set_config = drm_crtc_helper_set_config,
-+       .destroy = intel_crtc_destroy,
-+};
-+
-+
-+static void intel_crtc_init(struct drm_device *dev, int pipe)
-+{
-+       struct intel_crtc *intel_crtc;
-+       int i;
-+
-+       intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
-+       if (intel_crtc == NULL)
-+               return;
-+
-+       drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
-+
-+       intel_crtc->pipe = pipe;
-+       for (i = 0; i < 256; i++) {
-+               intel_crtc->lut_r[i] = i;
-+               intel_crtc->lut_g[i] = i;
-+               intel_crtc->lut_b[i] = i;
-+       }
-+
-+       intel_crtc->cursor_addr = 0;
-+       intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
-+       drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
-+
-+       intel_crtc->mode_set.crtc = &intel_crtc->base;
-+       intel_crtc->mode_set.connectors = (struct drm_connector **)(intel_crtc + 1);
-+       intel_crtc->mode_set.num_connectors = 0;
-+
-+}
-+
-+struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
-+{
-+       struct drm_crtc *crtc = NULL;
-+
-+       list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-+               struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-+               if (intel_crtc->pipe == pipe)
-+                       break;
-+       }
-+       return crtc;
-+}
-+
-+static int intel_connector_clones(struct drm_device *dev, int type_mask)
-+{
-+       int index_mask = 0;
-+       struct drm_connector *connector;
-+       int entry = 0;
-+
-+        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-+               struct intel_output *intel_output = to_intel_output(connector);
-+               if (type_mask & (1 << intel_output->type))
-+                       index_mask |= (1 << entry);
-+               entry++;
-+       }
-+       return index_mask;
-+}
-+
-+
-+static void intel_setup_outputs(struct drm_device *dev)
-+{
-+       struct drm_connector *connector;
-+
-+       if (!IS_POULSBO(dev))
-+               intel_crt_init(dev);
-+
-+       /* Set up integrated LVDS */
-+       if (IS_MOBILE(dev) && !IS_I830(dev))
-+               intel_lvds_init(dev);
-+
-+       if (IS_I9XX(dev)) {
-+               intel_sdvo_init(dev, SDVOB);
-+               intel_sdvo_init(dev, SDVOC);
-+       }
-+
-+       list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-+               struct intel_output *intel_output = to_intel_output(connector);
-+               struct drm_encoder *encoder = &intel_output->enc;
-+               int crtc_mask = 0, clone_mask = 0;
-+
-+               /* valid crtcs */
-+               switch(intel_output->type) {
-+               case INTEL_OUTPUT_HDMI:
-+                       crtc_mask = ((1 << 0)|
-+                                    (1 << 1));
-+                       clone_mask = ((1 << INTEL_OUTPUT_HDMI));
-+                       break;
-+               case INTEL_OUTPUT_DVO:
-+               case INTEL_OUTPUT_SDVO:
-+                       crtc_mask = ((1 << 0)|
-+                                    (1 << 1));
-+                       clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
-+                                     (1 << INTEL_OUTPUT_DVO) |
-+                                     (1 << INTEL_OUTPUT_SDVO));
-+                       break;
-+               case INTEL_OUTPUT_ANALOG:
-+                       crtc_mask = ((1 << 0)|
-+                                    (1 << 1));
-+                       clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
-+                                     (1 << INTEL_OUTPUT_DVO) |
-+                                     (1 << INTEL_OUTPUT_SDVO));
-+                       break;
-+               case INTEL_OUTPUT_LVDS:
-+                       crtc_mask = (1 << 1);
-+                       clone_mask = (1 << INTEL_OUTPUT_LVDS);
-+                       break;
-+               case INTEL_OUTPUT_TVOUT:
-+                       crtc_mask = ((1 << 0) |
-+                                    (1 << 1));
-+                       clone_mask = (1 << INTEL_OUTPUT_TVOUT);
-+                       break;
-+               }
-+               encoder->possible_crtcs = crtc_mask;
-+               encoder->possible_clones = intel_connector_clones(dev, clone_mask);
-+       }
-+}
-+
-+static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
-+{
-+       struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
-+       struct drm_device *dev = fb->dev;
-+
-+       //if (fb->fbdev)
-+       //      intelfb_remove(dev, fb);
-+
-+       drm_framebuffer_cleanup(fb);
-+       mutex_lock(&dev->struct_mutex);
-+       drm_gem_object_unreference(intel_fb->obj);
-+       mutex_unlock(&dev->struct_mutex);
-+
-+       kfree(intel_fb);
-+}
-+
-+static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
-+                                               struct drm_file *file_priv,
-+                                               unsigned int *handle)
-+{
-+       struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
-+       struct drm_gem_object *object = intel_fb->obj;
-+
-+       return drm_gem_handle_create(file_priv, object, handle);
-+}
-+
-+static const struct drm_framebuffer_funcs intel_fb_funcs = {
-+       .destroy = intel_user_framebuffer_destroy,
-+       .create_handle = intel_user_framebuffer_create_handle,
-+};
-+
-+int intel_framebuffer_create(struct drm_device *dev,
-+                            struct drm_mode_fb_cmd *mode_cmd,
-+                            struct drm_framebuffer **fb,
-+                            struct drm_gem_object *obj)
-+{
-+       struct intel_framebuffer *intel_fb;
-+       int ret;
-+
-+       intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
-+       if (!intel_fb)
-+               return -ENOMEM;
-+
-+       ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
-+       if (ret) {
-+               DRM_ERROR("framebuffer init failed %d\n", ret);
-+               return ret;
-+       }
-+
-+       drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
-+
-+       intel_fb->obj = obj;
-+
-+       *fb = &intel_fb->base;
-+
-+       return 0;
-+}
-+
-+
-+static struct drm_framebuffer *
-+intel_user_framebuffer_create(struct drm_device *dev,
-+                             struct drm_file *filp,
-+                             struct drm_mode_fb_cmd *mode_cmd)
-+{
-+       struct drm_gem_object *obj;
-+       struct drm_framebuffer *fb;
-+       int ret;
-+
-+       obj = drm_gem_object_lookup(dev, filp, mode_cmd->handle);
-+       if (!obj)
-+               return NULL;
-+
-+       ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj);
-+       if (ret) {
-+               drm_gem_object_unreference(obj);
-+               return NULL;
-+       }
-+
-+       return fb;
-+}
-+
-+static const struct drm_mode_config_funcs intel_mode_funcs = {
-+       .fb_create = intel_user_framebuffer_create,
-+//     .fb_changed = intelfb_probe,
-+};
-+
-+void intel_modeset_init(struct drm_device *dev)
-+{
-+       int num_pipe;
-+       int i;
-+
-+       drm_mode_config_init(dev);
-+
-+       dev->mode_config.min_width = 0;
-+       dev->mode_config.min_height = 0;
-+
-+       dev->mode_config.funcs = (void *)&intel_mode_funcs;
-+
-+       dev->mode_config.max_width = 2048;
-+       dev->mode_config.max_height = 2048;
-+
-+       /* set memory base */
-+       if (IS_I9XX(dev))
-+               dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2);
-+       else
-+               dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
-+
-+       if (IS_MOBILE(dev) || IS_I9XX(dev))
-+               num_pipe = 2;
-+       else
-+               num_pipe = 1;
-+       DRM_DEBUG("%d display pipe%s available.\n",
-+                 num_pipe, num_pipe > 1 ? "s" : "");
-+
-+       for (i = 0; i < num_pipe; i++) {
-+               intel_crtc_init(dev, i);
-+       }
-+
-+       intel_setup_outputs(dev);
-+}
-+
-+void intel_modeset_cleanup(struct drm_device *dev)
-+{
-+       drm_mode_config_cleanup(dev);
-+}
-+
-+
-+/* current intel driver doesn't take advantage of encoders
-+   always give back the encoder for the connector
-+*/
-+struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
-+{
-+       struct intel_output *intel_output = to_intel_output(connector);
-+
-+       return &intel_output->enc;
-+}
-Index: linux-2.6.28/drivers/gpu/drm/psb/intel_drv.h
-===================================================================
---- /dev/null   1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/psb/intel_drv.h        2009-02-12 09:14:41.000000000 +0000
-@@ -0,0 +1,7 @@
-+#include "../i915/intel_drv.h"
-+extern void intel_modeset_init(struct drm_device *dev);
-+extern void intel_modeset_cleanup(struct drm_device *dev);
-+
-+extern void intel_crtc_mode_restore(struct drm_crtc *crtc);
-+extern void intel_crtc_mode_save(struct drm_crtc *crtc);
-+
 Index: linux-2.6.28/drivers/gpu/drm/psb/psb_buffer.c
 ===================================================================
 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
@@ -9961,7 +8046,7 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/psb_drm.h
 Index: linux-2.6.28/drivers/gpu/drm/psb/psb_drv.c
 ===================================================================
 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/psb/psb_drv.c  2009-02-12 09:14:41.000000000 +0000
++++ linux-2.6.28/drivers/gpu/drm/psb/psb_drv.c  2009-02-12 10:11:59.000000000 +0000
 @@ -0,0 +1,1096 @@
 +/**************************************************************************
 + * Copyright (c) 2007, Intel Corporation.
@@ -9992,7 +8077,7 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/psb_drv.c
 +#include "psb_drm.h"
 +#include "psb_drv.h"
 +#include "psb_reg.h"
-+#include "i915_reg.h"
++#include "../i915/i915_reg.h"
 +#include "psb_msvdx.h"
 +#include "drm_pciids.h"
 +#include "psb_scene.h"
@@ -11062,8 +9147,8 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/psb_drv.c
 Index: linux-2.6.28/drivers/gpu/drm/psb/psb_drv.h
 ===================================================================
 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/psb/psb_drv.h  2009-02-12 09:14:41.000000000 +0000
-@@ -0,0 +1,548 @@
++++ linux-2.6.28/drivers/gpu/drm/psb/psb_drv.h  2009-02-12 10:10:55.000000000 +0000
+@@ -0,0 +1,549 @@
 +/**************************************************************************
 + * Copyright (c) 2007, Intel Corporation.
 + * All Rights Reserved.
@@ -11094,8 +9179,9 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/psb_drv.h
 +#include "psb_drm.h"
 +#include "psb_reg.h"
 +#include "psb_schedule.h"
-+#include "intel_drv.h"
 +#include "psb_priv.h"
++#include "../i915/intel_drv.h"
++
 +
 +enum {
 +       CHIP_PSB_8108 = 0,
@@ -13497,7 +11583,7 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/psb_gtt.c
 Index: linux-2.6.28/drivers/gpu/drm/psb/psb_i2c.c
 ===================================================================
 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/psb/psb_i2c.c  2009-02-12 09:14:41.000000000 +0000
++++ linux-2.6.28/drivers/gpu/drm/psb/psb_i2c.c  2009-02-12 10:12:29.000000000 +0000
 @@ -0,0 +1,179 @@
 +/*
 + * Copyright © 2006-2007 Intel Corporation
@@ -13534,7 +11620,7 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/psb_i2c.c
 +#include <linux/i2c-algo-bit.h>
 +#include "drmP.h"
 +#include "drm.h"
-+#include "intel_drv.h"
++#include "../i915/intel_drv.h"
 +#include "psb_drv.h"
 +
 +/*
@@ -20396,7 +18482,7 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/psb_schedule.h
 Index: linux-2.6.28/drivers/gpu/drm/psb/psb_setup.c
 ===================================================================
 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/psb/psb_setup.c        2009-02-12 09:14:42.000000000 +0000
++++ linux-2.6.28/drivers/gpu/drm/psb/psb_setup.c        2009-02-12 09:59:18.000000000 +0000
 @@ -0,0 +1,18 @@
 +#include "drmP.h"
 +#include "drm.h"
@@ -20414,7 +18500,7 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/psb_setup.c
 +
 +#include "../i915/intel_lvds.c"
 +#include "../i915/intel_sdvo.c"
-+#include "intel_display.c"
++#include "../i915/intel_display.c"
 +#include "../i915/intel_modes.c"
 Index: linux-2.6.28/drivers/gpu/drm/psb/psb_sgx.c
 ===================================================================
@@ -23369,22 +21455,6 @@ Index: linux-2.6.28/drivers/gpu/drm/drm_crtc.c
         }
         mutex_unlock(&dev->mode_config.mutex);
  }
-Index: linux-2.6.28/drivers/gpu/drm/drm_sysfs.c
-===================================================================
---- linux-2.6.28.orig/drivers/gpu/drm/drm_sysfs.c       2009-02-12 09:14:37.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/drm_sysfs.c    2009-02-12 09:14:42.000000000 +0000
-@@ -156,8 +156,9 @@
-        enum drm_connector_status status;
- 
-        status = connector->funcs->detect(connector);
--       return snprintf(buf, PAGE_SIZE, "%s",
--                       drm_get_connector_status_name(status));
-+       return 0;
-+       //return snprintf(buf, PAGE_SIZE, "%s",
-+       //              drm_get_connector_status_name(status));
- }
- 
- static ssize_t dpms_show(struct device *device,
 Index: linux-2.6.28/include/drm/drm_crtc.h
 ===================================================================
 --- linux-2.6.28.orig/include/drm/drm_crtc.h    2009-02-12 09:14:40.000000000 +0000
@@ -23411,7 +21481,7 @@ Index: linux-2.6.28/include/drm/drm_crtc.h
 Index: linux-2.6.28/drivers/gpu/drm/i915/intel_crt.c
 ===================================================================
 --- linux-2.6.28.orig/drivers/gpu/drm/i915/intel_crt.c  2009-02-12 09:14:37.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/i915/intel_crt.c       2009-02-12 09:14:42.000000000 +0000
++++ linux-2.6.28/drivers/gpu/drm/i915/intel_crt.c       2009-02-12 16:12:38.000000000 +0000
 @@ -36,7 +36,7 @@
  static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
  {
@@ -23448,26 +21518,10 @@ Index: linux-2.6.28/drivers/gpu/drm/i915/intel_crt.c
                 if (intel_crt_detect_hotplug(connector))
                         return connector_status_connected;
                 else
-@@ -189,7 +189,7 @@
-        struct intel_output *intel_output = to_intel_output(connector);
- 
-        intel_i2c_destroy(intel_output->ddc_bus);
--       drm_sysfs_connector_remove(connector);
-+       //drm_sysfs_connector_remove(connector);
-        drm_connector_cleanup(connector);
-        kfree(connector);
- }
-@@ -280,5 +280,5 @@
-        drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
-        drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
- 
--       drm_sysfs_connector_add(connector);
-+       //drm_sysfs_connector_add(connector);
- }
 Index: linux-2.6.28/drivers/gpu/drm/i915/intel_lvds.c
 ===================================================================
 --- linux-2.6.28.orig/drivers/gpu/drm/i915/intel_lvds.c 2009-02-12 09:14:37.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/i915/intel_lvds.c      2009-02-12 09:14:42.000000000 +0000
++++ linux-2.6.28/drivers/gpu/drm/i915/intel_lvds.c      2009-02-12 16:13:08.000000000 +0000
 @@ -36,6 +36,259 @@
  #include "i915_drm.h"
  #include "i915_drv.h"
@@ -23938,7 +21992,7 @@ Index: linux-2.6.28/drivers/gpu/drm/i915/intel_lvds.c
  
         if (ret)
                 return ret;
-@@ -333,9 +637,12 @@
+@@ -333,8 +637,11 @@
  {
         struct intel_output *intel_output = to_intel_output(connector);
  
@@ -23946,12 +22000,10 @@ Index: linux-2.6.28/drivers/gpu/drm/i915/intel_lvds.c
 +               iounmap(dev_OpRegion);
         if (intel_output->ddc_bus)
                 intel_i2c_destroy(intel_output->ddc_bus);
--       drm_sysfs_connector_remove(connector);
 +       intel_i2c_destroy(lvds_i2c_bus);
-+       //drm_sysfs_connector_remove(connector);
+        drm_sysfs_connector_remove(connector);
         drm_connector_cleanup(connector);
         kfree(connector);
- }
 @@ -373,7 +680,45 @@
  };
  
@@ -24228,19 +22280,10 @@ Index: linux-2.6.28/drivers/gpu/drm/i915/intel_lvds.c
         /*
          * If we didn't get EDID, try checking if the panel is already turned
          * on.  If so, assume that whatever is currently programmed is the
-@@ -520,7 +1001,7 @@
- 
- 
- out:
--       drm_sysfs_connector_add(connector);
-+       //drm_sysfs_connector_add(connector);
-        return;
- 
- failed:
 Index: linux-2.6.28/drivers/gpu/drm/i915/intel_sdvo.c
 ===================================================================
 --- linux-2.6.28.orig/drivers/gpu/drm/i915/intel_sdvo.c 2009-02-12 09:14:37.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/i915/intel_sdvo.c      2009-02-12 09:14:42.000000000 +0000
++++ linux-2.6.28/drivers/gpu/drm/i915/intel_sdvo.c      2009-02-12 16:12:58.000000000 +0000
 @@ -37,6 +37,14 @@
  
  #undef SDVO_DEBUG
@@ -24310,15 +22353,6 @@ Index: linux-2.6.28/drivers/gpu/drm/i915/intel_sdvo.c
         struct intel_output *intel_output = to_intel_output(connector);
         struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
         int o;
-@@ -941,7 +949,7 @@
- 
-        if (intel_output->i2c_bus)
-                intel_i2c_destroy(intel_output->i2c_bus);
--       drm_sysfs_connector_remove(connector);
-+       //drm_sysfs_connector_remove(connector);
-        drm_connector_cleanup(connector);
-        kfree(intel_output);
- }
 @@ -988,6 +996,32 @@
         u8 ch[0x40];
         int i;
@@ -24352,20 +22386,11 @@ Index: linux-2.6.28/drivers/gpu/drm/i915/intel_sdvo.c
  
         intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
         if (!intel_output) {
-@@ -1087,7 +1121,7 @@
-        connector->connector_type = connector_type;
- 
-        drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
--       drm_sysfs_connector_add(connector);
-+       //drm_sysfs_connector_add(connector);
- 
-        /* Set the input timing to the screen. Assume always input 0. */
-        intel_sdvo_set_target_input(intel_output, true, false);
 Index: linux-2.6.28/drivers/gpu/drm/psb/psb_priv.h
 ===================================================================
 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/psb/psb_priv.h 2009-02-12 09:14:42.000000000 +0000
-@@ -0,0 +1,238 @@
++++ linux-2.6.28/drivers/gpu/drm/psb/psb_priv.h 2009-02-12 10:11:32.000000000 +0000
+@@ -0,0 +1,244 @@
 +#include "psb_drm.h"
 +#include "psb_reg.h"
 +#include "psb_schedule.h"
@@ -24604,10 +22629,16 @@ Index: linux-2.6.28/drivers/gpu/drm/psb/psb_priv.h
 +
 +};
 +
++
++extern void intel_modeset_init(struct drm_device *dev);
++extern void intel_modeset_cleanup(struct drm_device *dev);
++
++extern void intel_crtc_mode_restore(struct drm_crtc *crtc);
++extern void intel_crtc_mode_save(struct drm_crtc *crtc);
 Index: linux-2.6.28/drivers/gpu/drm/i915/i915_drv.h
 ===================================================================
 --- linux-2.6.28.orig/drivers/gpu/drm/i915/i915_drv.h   2009-02-12 09:47:51.000000000 +0000
-+++ linux-2.6.28/drivers/gpu/drm/i915/i915_drv.h        2009-02-11 21:23:41.000000000 +0000
++++ linux-2.6.28/drivers/gpu/drm/i915/i915_drv.h        2009-02-12 10:06:18.000000000 +0000
 @@ -672,6 +672,7 @@
                 LOCK_TEST_WITH_RETURN(dev, file_priv);                  \
  } while (0)
@@ -24642,3 +22673,689 @@ Index: linux-2.6.28/drivers/gpu/drm/i915/i915_drv.h
  
  #define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev))
  #define SUPPORTS_INTEGRATED_HDMI(dev)  (IS_G4X(dev))
+Index: linux-2.6.28/drivers/gpu/drm/i915/intel_display.c
+===================================================================
+--- linux-2.6.28.orig/drivers/gpu/drm/i915/intel_display.c      2009-02-12 09:58:47.000000000 +0000
++++ linux-2.6.28/drivers/gpu/drm/i915/intel_display.c   2009-02-12 16:32:26.000000000 +0000
+@@ -26,9 +26,9 @@
+ 
+ #include <linux/i2c.h>
+ #include "drmP.h"
+-#include "intel_drv.h"
++#include "../i915/intel_drv.h"
+ #include "i915_drm.h"
+-#include "i915_drv.h"
++#include "../i915/i915_drv.h"
+ 
+ #include "drm_crtc_helper.h"
+ 
+@@ -282,7 +282,7 @@
+                                int refclk, intel_clock_t *best_clock)
+ {
+        struct drm_device *dev = crtc->dev;
+-       struct drm_i915_private *dev_priv = dev->dev_private;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        intel_clock_t clock;
+        const intel_limit_t *limit = intel_limit(crtc);
+        int err = target;
+@@ -348,12 +348,8 @@
+                    struct drm_framebuffer *old_fb)
+ {
+        struct drm_device *dev = crtc->dev;
+-       struct drm_i915_private *dev_priv = dev->dev_private;
+-       struct drm_i915_master_private *master_priv;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+-       struct intel_framebuffer *intel_fb;
+-       struct drm_i915_gem_object *obj_priv;
+-       struct drm_gem_object *obj;
+        int pipe = intel_crtc->pipe;
+        unsigned long Start, Offset;
+        int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
+@@ -362,66 +358,8 @@
+        int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+        u32 dspcntr, alignment;
+ 
+-       /* no fb bound */
+-       if (!crtc->fb) {
+-               DRM_DEBUG("No FB bound\n");
+-               return;
+-       }
+-
+-       intel_fb = to_intel_framebuffer(crtc->fb);
+-       obj = intel_fb->obj;
+-       obj_priv = obj->driver_private;
+-
+-       switch (obj_priv->tiling_mode) {
+-       case I915_TILING_NONE:
+-               alignment = 64 * 1024;
+-               break;
+-       case I915_TILING_X:
+-               if (IS_I9XX(dev))
+-                       alignment = 1024 * 1024;
+-               else
+-                       alignment = 512 * 1024;
+-               break;
+-       case I915_TILING_Y:
+-               /* FIXME: Is this true? */
+-               DRM_ERROR("Y tiled not allowed for scan out buffers\n");
+-               return;
+-       default:
+-               BUG();
+-       }
+-
+-       if (i915_gem_object_pin(intel_fb->obj, alignment))
+-               return;
+-
+-       i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
+-
+-       Start = obj_priv->gtt_offset;
+-       Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+-
+-       I915_WRITE(dspstride, crtc->fb->pitch);
+-
+-       dspcntr = I915_READ(dspcntr_reg);
+-       /* Mask out pixel format bits in case we change it */
+-       dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+-       switch (crtc->fb->bits_per_pixel) {
+-       case 8:
+-               dspcntr |= DISPPLANE_8BPP;
+-               break;
+-       case 16:
+-               if (crtc->fb->depth == 15)
+-                       dspcntr |= DISPPLANE_15_16BPP;
+-               else
+-                       dspcntr |= DISPPLANE_16BPP;
+-               break;
+-       case 24:
+-       case 32:
+-               dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+-               break;
+-       default:
+-               DRM_ERROR("Unknown color depth\n");
+-               return;
+-       }
+-       I915_WRITE(dspcntr_reg, dspcntr);
++       Start = crtc->fb->offset;
++       Offset = y * crtc->fb->pitch + x;
+ 
+        DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+        if (IS_I965G(dev)) {
+@@ -434,28 +372,18 @@
+                I915_READ(dspbase);
+        }
+ 
+-       intel_wait_for_vblank(dev);
+-
+-       if (old_fb) {
+-               intel_fb = to_intel_framebuffer(old_fb);
+-               i915_gem_object_unpin(intel_fb->obj);
+-       }
+-
+-       if (!dev->primary->master)
+-               return;
+ 
+-       master_priv = dev->primary->master->driver_priv;
+-       if (!master_priv->sarea_priv)
++       if (!dev_priv->sarea_priv)
+                return;
+ 
+        switch (pipe) {
+        case 0:
+-               master_priv->sarea_priv->pipeA_x = x;
+-               master_priv->sarea_priv->pipeA_y = y;
++               dev_priv->sarea_priv->pipeA_x = x;
++               dev_priv->sarea_priv->pipeA_y = y;
+                break;
+        case 1:
+-               master_priv->sarea_priv->pipeB_x = x;
+-               master_priv->sarea_priv->pipeB_y = y;
++               dev_priv->sarea_priv->pipeB_x = x;
++               dev_priv->sarea_priv->pipeB_y = y;
+                break;
+        default:
+                DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+@@ -474,8 +402,7 @@
+ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+ {
+        struct drm_device *dev = crtc->dev;
+-       struct drm_i915_master_private *master_priv;
+-       struct drm_i915_private *dev_priv = dev->dev_private;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+        int pipe = intel_crtc->pipe;
+        int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+@@ -569,23 +496,20 @@
+                break;
+        }
+ 
+-       if (!dev->primary->master)
+-               return;
+ 
+-       master_priv = dev->primary->master->driver_priv;
+-       if (!master_priv->sarea_priv)
++       if (!dev_priv->sarea_priv)
+                return;
+ 
+        enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+ 
+        switch (pipe) {
+        case 0:
+-               master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
+-               master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
++               dev_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
++               dev_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
+                break;
+        case 1:
+-               master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
+-               master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
++               dev_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
++               dev_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
+                break;
+        default:
+                DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+@@ -640,7 +564,7 @@
+                return 400000;
+        else if (IS_I915G(dev))
+                return 333000;
+-       else if (IS_I945GM(dev) || IS_845G(dev))
++       else if (IS_I945GM(dev) || IS_POULSBO(dev) || IS_845G(dev))
+                return 200000;
+        else if (IS_I915GM(dev)) {
+                u16 gcfgc = 0;
+@@ -687,7 +611,7 @@
+  */
+ static int intel_panel_fitter_pipe (struct drm_device *dev)
+ {
+-       struct drm_i915_private *dev_priv = dev->dev_private;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        u32  pfit_control;
+ 
+        /* i830 doesn't have a panel fitter */
+@@ -707,7 +631,228 @@
+        /* older chips can only use pipe 1 */
+        return 1;
+ }
++#if 0
++#define WA_NO_FB_GARBAGE_DISPLAY
++#ifdef WA_NO_FB_GARBAGE_DISPLAY
++static u32 fp_reg_value[2];
++static u32 dpll_reg_value[2];
++static u32 dpll_md_reg_value[2];
++static u32 dspcntr_reg_value[2];
++static u32 pipeconf_reg_value[2];
++static u32 htot_reg_value[2];
++static u32 hblank_reg_value[2];
++static u32 hsync_reg_value[2];
++static u32 vtot_reg_value[2];
++static u32 vblank_reg_value[2];
++static u32 vsync_reg_value[2];
++static u32 dspsize_reg_value[2];
++static u32 dspstride_reg_value[2];
++static u32 dsppos_reg_value[2];
++static u32 pipesrc_reg_value[2];
++
++static u32 dspbase_value[2];
++
++static u32 lvds_reg_value[2];
++static u32 vgacntrl_reg_value[2];
++static u32 pfit_control_reg_value[2];
++
++
++void intel_crtc_mode_restore(struct drm_crtc *crtc)
++{
++       struct drm_device *dev = crtc->dev;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
++       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
++       int pipe = intel_crtc->pipe;
++       int fp_reg = (pipe == 0) ? FPA0 : FPB0;
++       int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
++       int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
++       int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
++       int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
++       int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
++       int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
++       int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
++       int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
++       int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
++       int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
++       int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
++       int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
++       int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
++       int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
++       int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
++
++       bool ok, is_sdvo = false, is_dvo = false;
++       bool is_crt = false, is_lvds = false, is_tv = false;
++       struct drm_mode_config *mode_config = &dev->mode_config;
++       struct drm_connector *output;
++
++       list_for_each_entry(output, &mode_config->connector_list, head) {
++               struct intel_output *intel_output = to_intel_output(crtc);
++
++               if (output->crtc != crtc)
++                       continue;
++
++               switch (intel_output->type) {
++               case INTEL_OUTPUT_LVDS:
++                       is_lvds = TRUE;
++                       break;
++               case INTEL_OUTPUT_SDVO:
++                       is_sdvo = TRUE;
++                       break;
++               case INTEL_OUTPUT_DVO:
++                       is_dvo = TRUE;
++                       break;
++               case INTEL_OUTPUT_TVOUT:
++                       is_tv = TRUE;
++                       break;
++               case INTEL_OUTPUT_ANALOG:
++                       is_crt = TRUE;
++                       break;
++               }
++               if(is_lvds && ((lvds_reg_value[pipe] & LVDS_PORT_EN) == 0))
++               {
++                       printk("%s: is_lvds but not the boot display, so return\n",
++                                                       __FUNCTION__);
++                       return;
++               }
++               output->funcs->prepare(output);
++       }
++
++       intel_crtc_prepare(crtc);
++       /* Disable the panel fitter if it was on our pipe */
++       if (intel_panel_fitter_pipe(dev) == pipe)
++               I915_WRITE(PFIT_CONTROL, 0);
+ 
++       if (dpll_reg_value[pipe] & DPLL_VCO_ENABLE) {
++               I915_WRITE(fp_reg, fp_reg_value[pipe]);
++               I915_WRITE(dpll_reg, dpll_reg_value[pipe]& ~DPLL_VCO_ENABLE);
++               I915_READ(dpll_reg);
++               udelay(150);
++       }
++
++       /*
++       if(is_lvds)
++               I915_WRITE(LVDS, lvds_reg_value[pipe]);
++       */
++       if (is_lvds) {
++               I915_WRITE(LVDS, lvds_reg_value[pipe]);
++               I915_READ(LVDS);
++       }
++
++       I915_WRITE(fp_reg, fp_reg_value[pipe]);
++       I915_WRITE(dpll_reg, dpll_reg_value[pipe]);
++       I915_READ(dpll_reg);
++       udelay(150);
++       //I915_WRITE(dpll_md_reg, dpll_md_reg_value[pipe]);
++       I915_WRITE(dpll_reg, dpll_reg_value[pipe]);
++       I915_READ(dpll_reg);
++       udelay(150);
++       I915_WRITE(htot_reg, htot_reg_value[pipe]);
++       I915_WRITE(hblank_reg, hblank_reg_value[pipe]);
++       I915_WRITE(hsync_reg, hsync_reg_value[pipe]);
++       I915_WRITE(vtot_reg, vtot_reg_value[pipe]);
++       I915_WRITE(vblank_reg, vblank_reg_value[pipe]);
++       I915_WRITE(vsync_reg, vsync_reg_value[pipe]);
++       I915_WRITE(dspstride_reg, dspstride_reg_value[pipe]);
++       I915_WRITE(dspsize_reg, dspsize_reg_value[pipe]);
++       I915_WRITE(dsppos_reg, dsppos_reg_value[pipe]);
++       I915_WRITE(pipesrc_reg, pipesrc_reg_value[pipe]);
++       I915_WRITE(pipeconf_reg, pipeconf_reg_value[pipe]);
++       I915_READ(pipeconf_reg);
++       intel_wait_for_vblank(dev);
++       I915_WRITE(dspcntr_reg, dspcntr_reg_value[pipe]);
++       I915_WRITE(dspbase, dspbase_value[pipe]);
++       I915_READ(dspbase);
++       I915_WRITE(VGACNTRL, vgacntrl_reg_value[pipe]);
++       intel_wait_for_vblank(dev);
++       I915_WRITE(PFIT_CONTROL, pfit_control_reg_value[pipe]);
++
++       intel_crtc_commit(crtc);
++       list_for_each_entry(output, &mode_config->connector_list, head) {
++               if (output->crtc != crtc)
++                       continue;
++
++               output->funcs->commit(output);
++               //output->funcs->dpms(output, DRM_MODE_DPMS_OFF);
++               //printk("turn off the display first\n");
++       }
++       return;
++}
++
++void intel_crtc_mode_save(struct drm_crtc *crtc)
++{
++       struct drm_device *dev = crtc->dev;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
++       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
++       int pipe = intel_crtc->pipe;
++       int fp_reg = (pipe == 0) ? FPA0 : FPB0;
++       int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
++       int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
++       int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
++       int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
++       int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
++       int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
++       int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
++       int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
++       int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
++       int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
++       int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
++       int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
++       int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
++       int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
++       int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
++       bool ok, is_sdvo = false, is_dvo = false;
++       bool is_crt = false, is_lvds = false, is_tv = false;
++       struct drm_mode_config *mode_config = &dev->mode_config;
++       struct drm_connector *output;
++
++       list_for_each_entry(output, &mode_config->connector_list, head) {
++               struct intel_output *intel_output = to_intel_output(crtc);
++
++               if (output->crtc != crtc)
++                       continue;
++
++               switch (intel_output->type) {
++               case INTEL_OUTPUT_LVDS:
++                       is_lvds = TRUE;
++                       break;
++               case INTEL_OUTPUT_SDVO:
++                       is_sdvo = TRUE;
++                       break;
++               case INTEL_OUTPUT_DVO:
++                       is_dvo = TRUE;
++                       break;
++               case INTEL_OUTPUT_TVOUT:
++                       is_tv = TRUE;
++                       break;
++               case INTEL_OUTPUT_ANALOG:
++                       is_crt = TRUE;
++                       break;
++               }
++       }
++
++       fp_reg_value[pipe] = I915_READ(fp_reg);
++       dpll_reg_value[pipe] = I915_READ(dpll_reg);
++       dpll_md_reg_value[pipe] = I915_READ(dpll_md_reg);
++       dspcntr_reg_value[pipe] = I915_READ(dspcntr_reg);
++       pipeconf_reg_value[pipe] = I915_READ(pipeconf_reg);
++       htot_reg_value[pipe] = I915_READ(htot_reg);
++       hblank_reg_value[pipe] = I915_READ(hblank_reg);
++       hsync_reg_value[pipe] = I915_READ(hsync_reg);
++       vtot_reg_value[pipe] = I915_READ(vtot_reg);
++       vblank_reg_value[pipe] = I915_READ(vblank_reg);
++       vsync_reg_value[pipe] = I915_READ(vsync_reg);
++       dspsize_reg_value[pipe] = I915_READ(dspsize_reg);
++       dspstride_reg_value[pipe] = I915_READ(dspstride_reg);
++       dsppos_reg_value[pipe] = I915_READ(dsppos_reg);
++       pipesrc_reg_value[pipe] = I915_READ(pipesrc_reg);
++       dspbase_value[pipe] = I915_READ(dspbase);
++       if(is_lvds)
++               lvds_reg_value[pipe] = I915_READ(LVDS);
++       vgacntrl_reg_value[pipe] = I915_READ(VGACNTRL);
++       pfit_control_reg_value[pipe] = I915_READ(PFIT_CONTROL);
++}
++#endif
++#endif
+ static void intel_crtc_mode_set(struct drm_crtc *crtc,
+                                struct drm_display_mode *mode,
+                                struct drm_display_mode *adjusted_mode,
+@@ -715,7 +860,7 @@
+                                struct drm_framebuffer *old_fb)
+ {
+        struct drm_device *dev = crtc->dev;
+-       struct drm_i915_private *dev_priv = dev->dev_private;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+        int pipe = intel_crtc->pipe;
+        int fp_reg = (pipe == 0) ? FPA0 : FPB0;
+@@ -730,6 +875,7 @@
+        int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+        int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+        int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
++       int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+        int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+        int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+        int refclk;
+@@ -740,7 +886,10 @@
+        struct drm_mode_config *mode_config = &dev->mode_config;
+        struct drm_connector *connector;
+ 
+-       drm_vblank_pre_modeset(dev, pipe);
++       if (!crtc->fb) {
++               DRM_ERROR("Can't set mode without attached fb\n");
++               return;
++       }
+ 
+        list_for_each_entry(connector, &mode_config->connector_list, head) {
+                struct intel_output *intel_output = to_intel_output(connector);
+@@ -784,13 +933,15 @@
+ 
+        dpll = DPLL_VGA_MODE_DIS;
+        if (IS_I9XX(dev)) {
+-               if (is_lvds)
++               if (is_lvds) {
+                        dpll |= DPLLB_MODE_LVDS;
+-               else
++                       if (IS_POULSBO(dev))
++                               dpll |= DPLL_DVO_HIGH_SPEED;
++               } else
+                        dpll |= DPLLB_MODE_DAC_SERIAL;
+                if (is_sdvo) {
+                        dpll |= DPLL_DVO_HIGH_SPEED;
+-                       if (IS_I945G(dev) || IS_I945GM(dev)) {
++                       if (IS_I945G(dev) || IS_I945GM(dev) || IS_POULSBO(dev)) {
+                                int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+                                dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+                        }
+@@ -841,6 +992,25 @@
+        /* Set up the display plane register */
+        dspcntr = DISPPLANE_GAMMA_ENABLE;
+ 
++       switch (crtc->fb->bits_per_pixel) {
++       case 8:
++               dspcntr |= DISPPLANE_8BPP;
++               break;
++       case 16:
++               if (crtc->fb->depth == 15)
++                       dspcntr |= DISPPLANE_15_16BPP;
++               else
++                       dspcntr |= DISPPLANE_16BPP;
++               break;
++       case 32:
++               dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
++               break;
++       default:
++               DRM_ERROR("Unknown color depth\n");
++               return;
++       }
++
++
+        if (pipe == 0)
+                dspcntr |= DISPPLANE_SEL_PIPE_A;
+        else
+@@ -934,6 +1104,7 @@
+                   ((adjusted_mode->crtc_vblank_end - 1) << 16));
+        I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+                   ((adjusted_mode->crtc_vsync_end - 1) << 16));
++       I915_WRITE(dspstride_reg, crtc->fb->pitch);
+        /* pipesrc and dspsize control the size that is scaled from, which should
+         * always be the user's requested size.
+         */
+@@ -950,14 +1121,14 @@
+        /* Flush the plane changes */
+        intel_pipe_set_base(crtc, x, y, old_fb);
+ 
+-       drm_vblank_post_modeset(dev, pipe);
++       intel_wait_for_vblank(dev);
+ }
+ 
+ /** Loads the palette/gamma unit for the CRTC with the prepared values */
+ void intel_crtc_load_lut(struct drm_crtc *crtc)
+ {
+        struct drm_device *dev = crtc->dev;
+-       struct drm_i915_private *dev_priv = dev->dev_private;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+        int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B;
+        int i;
+@@ -980,7 +1151,7 @@
+                                 uint32_t width, uint32_t height)
+ {
+        struct drm_device *dev = crtc->dev;
+-       struct drm_i915_private *dev_priv = dev->dev_private;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+        struct drm_gem_object *bo;
+        struct drm_i915_gem_object *obj_priv;
+@@ -1019,7 +1190,7 @@
+                ret = -ENOMEM;
+                goto fail;
+        }
+-
++#if 0
+        /* we only need to pin inside GTT if cursor is non-phy */
+        if (!dev_priv->cursor_needs_physical) {
+                ret = i915_gem_object_pin(bo, PAGE_SIZE);
+@@ -1036,7 +1207,7 @@
+                }
+                addr = obj_priv->phys_obj->handle->busaddr;
+        }
+-
++#endif
+        temp = 0;
+        /* set the pipe for the cursor */
+        temp |= (pipe << 28);
+@@ -1047,6 +1218,7 @@
+        I915_WRITE(base, addr);
+ 
+        if (intel_crtc->cursor_bo) {
++#if 0
+                if (dev_priv->cursor_needs_physical) {
+                        if (intel_crtc->cursor_bo != bo)
+                                i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
+@@ -1055,6 +1227,7 @@
+                mutex_lock(&dev->struct_mutex);
+                drm_gem_object_unreference(intel_crtc->cursor_bo);
+                mutex_unlock(&dev->struct_mutex);
++#endif
+        }
+ 
+        intel_crtc->cursor_addr = addr;
+@@ -1071,7 +1244,7 @@
+ static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+ {
+        struct drm_device *dev = crtc->dev;
+-       struct drm_i915_private *dev_priv = dev->dev_private;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+        int pipe = intel_crtc->pipe;
+        uint32_t temp = 0;
+@@ -1255,7 +1428,7 @@
+ /* Returns the clock of the currently programmed mode of the given pipe. */
+ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
+ {
+-       struct drm_i915_private *dev_priv = dev->dev_private;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+        int pipe = intel_crtc->pipe;
+        u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B);
+@@ -1333,7 +1506,7 @@
+ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
+                                             struct drm_crtc *crtc)
+ {
+-       struct drm_i915_private *dev_priv = dev->dev_private;
++       DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+        int pipe = intel_crtc->pipe;
+        struct drm_display_mode *mode;
+@@ -1399,7 +1572,6 @@
+ 
+        drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
+ 
+-       drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
+        intel_crtc->pipe = pipe;
+        for (i = 0; i < 256; i++) {
+                intel_crtc->lut_r[i] = i;
+@@ -1415,11 +1587,6 @@
+        intel_crtc->mode_set.connectors = (struct drm_connector **)(intel_crtc + 1);
+        intel_crtc->mode_set.num_connectors = 0;
+ 
+-       if (i915_fbpercrtc) {
+-
+-
+-
+-       }
+ }
+ 
+ struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
+@@ -1454,27 +1621,17 @@
+ {
+        struct drm_connector *connector;
+ 
+-       intel_crt_init(dev);
++       if (!IS_POULSBO(dev))
++               intel_crt_init(dev);
+ 
+        /* Set up integrated LVDS */
+        if (IS_MOBILE(dev) && !IS_I830(dev))
+                intel_lvds_init(dev);
+ 
+        if (IS_I9XX(dev)) {
+-               int found;
+-
+-               found = intel_sdvo_init(dev, SDVOB);
+-               if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+-                       intel_hdmi_init(dev, SDVOB);
+-
+-               found = intel_sdvo_init(dev, SDVOC);
+-               if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+-                       intel_hdmi_init(dev, SDVOC);
+-       } else
+-               intel_dvo_init(dev);
+-
+-       if (IS_I9XX(dev) && IS_MOBILE(dev))
+-               intel_tv_init(dev);
++               intel_sdvo_init(dev, SDVOB);
++               intel_sdvo_init(dev, SDVOC);
++       }
+ 
+        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+                struct intel_output *intel_output = to_intel_output(connector);
+@@ -1523,8 +1680,8 @@
+        struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+        struct drm_device *dev = fb->dev;
+ 
+-       if (fb->fbdev)
+-               intelfb_remove(dev, fb);
++       //if (fb->fbdev)
++       //      intelfb_remove(dev, fb);
+ 
+        drm_framebuffer_cleanup(fb);
+        mutex_lock(&dev->struct_mutex);
+@@ -1601,7 +1758,7 @@
+ 
+ static const struct drm_mode_config_funcs intel_mode_funcs = {
+        .fb_create = intel_user_framebuffer_create,
+-       .fb_changed = intelfb_probe,
++//     .fb_changed = intelfb_probe,
+ };
+ 
+ void intel_modeset_init(struct drm_device *dev)
+@@ -1616,13 +1773,8 @@
+ 
+        dev->mode_config.funcs = (void *)&intel_mode_funcs;
+ 
+-       if (IS_I965G(dev)) {
+-               dev->mode_config.max_width = 8192;
+-               dev->mode_config.max_height = 8192;
+-       } else {
+-               dev->mode_config.max_width = 2048;
+-               dev->mode_config.max_height = 2048;
+-       }
++       dev->mode_config.max_width = 2048;
++       dev->mode_config.max_height = 2048;
+ 
+        /* set memory base */
+        if (IS_I9XX(dev))