documentation: Scrubbed use of directory names

There was inconsistent use of the way directory names were
handled throughout the YP documentation.  I have scrubbed the
set and replaced many instances such as the following:

meta/<something> replaces /meta/<something>
poky replaces ~/poky (except in some very specific examples)

I basically got rid of leading slash characters.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae2e451ed8f61484d04b30017021912c4493a441)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

12 files changed, 49 insertions, 49 deletions

diff --git a/documentation/adt-manual/adt-prepare.xml b/documentation/adt-manual/adt-prepare.xml
index 02416b3cda..df9d5b0f76 100644
--- a/documentation/adt-manual/adt-prepare.xml
+++ b/documentation/adt-manual/adt-prepare.xml
@@ -106,7 +106,7 @@
                         build environment while also creating the default
                         Build Directory, and run the BitBake command that
                         results in the tarball
-                        <filename>~/yocto-project/build/tmp/deploy/sdk/adt_installer.tar.bz2</filename>:
+                        <filename>poky/build/tmp/deploy/sdk/adt_installer.tar.bz2</filename>:
                         <note>
                             Before using BitBake to build the ADT tarball, be
                             sure to make sure your
@@ -136,7 +136,7 @@
                 a top-level directory named <filename>adt-installer</filename>:
                 <literallayout class='monospaced'>
      $ cd ~
-     $ cp ~/poky/build/tmp/deploy/sdk/adt_installer.tar.bz2 $HOME
+     $ cp poky/build/tmp/deploy/sdk/adt_installer.tar.bz2 $HOME
      $ tar -xjf adt_installer.tar.bz2
                 </literallayout>
                 Unpacking it creates the directory <filename>adt-installer</filename>,
@@ -206,7 +206,7 @@
                 When you run the installer, the environment must use a
                 host <filename>gcc</filename>:
                 <literallayout class='monospaced'>
-     $ cd ~/adt-installer
+     $ cd adt-installer
      $ ./adt_installer
                 </literallayout>
                 Once the installer begins to run, you are asked to enter the
@@ -303,7 +303,7 @@
                     The first thing the installer prompts you for is the
                     directory into which you want to install the toolchain.
                     The default directory used is
-                    <filename>opt/poky/&DISTRO;</filename>.
+                    <filename>/opt/poky/&DISTRO;</filename>.
                     If you do not have write permissions for the directory
                     into which you are installing the toolchain, the
                     toolchain installer notifies you and exits.
@@ -545,7 +545,7 @@
             the toolchain environment script in the
             <filename>tmp</filename> directory.
             If you installed the toolchain by hand, the environment setup
-            script is located in <filename>opt/poky/&DISTRO;</filename>.
+            script is located in <filename>/opt/poky/&DISTRO;</filename>.
         </para>
 
         <para>
@@ -563,16 +563,16 @@
             built filesystem that is located in the
             <filename>~/Downloads</filename> directory.
             Furthermore, this command extracts the root filesystem into the
-            <filename>$HOME/qemux86-sato</filename> directory:
+            <filename>qemux86-sato</filename> directory:
             <literallayout class='monospaced'>
      $ cd ~
      $ source /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
      $ runqemu-extract-sdk \
-        ~Downloads/core-image-sato-sdk-qemux86-2011091411831.rootfs.tar.bz2 \
+        ~/Downloads/core-image-sato-sdk-qemux86-2011091411831.rootfs.tar.bz2 \
         $HOME/qemux86-sato
             </literallayout>
             You could now point to the target sysroot at
-            <filename>$HOME/qemux86-sato</filename>.
+            <filename>qemux86-sato</filename>.
         </para>
     </section>
 </section>
@@ -625,13 +625,13 @@
         <note>
             By default, this toolchain does not build static binaries.
             If you want to use the toolchain to build these types of libraries,
-            you need to be sure your image has the appropriate static 
+            you need to be sure your image has the appropriate static
             development libraries.
-            Use the 
+            Use the
             <ulink url='&YOCTO_DOCS_REF_URL;#var-IMAGE_INSTALL'><filename>IMAGE_INSTALL</filename></ulink>
             variable inside your <filename>local.conf</filename> file to
             install the appropriate library packages.
-            Following is an example using <filename>eglibc</filename> static 
+            Following is an example using <filename>eglibc</filename> static
             development libraries:
             <literallayout class='monospaced'>
      IMAGE_INSTALL_append = " eglibc-staticdev"
diff --git a/documentation/bsp-guide/bsp.xml b/documentation/bsp-guide/bsp.xml
index c85e7e0883..9a8f3af573 100644
--- a/documentation/bsp-guide/bsp.xml
+++ b/documentation/bsp-guide/bsp.xml
@@ -562,7 +562,7 @@
             <para>
                 For example, suppose you had some configuration options in a file called
                 <filename>network_configs.cfg</filename>.
-                You can place that file inside a directory named <filename>/linux-yocto</filename> and then add
+                You can place that file inside a directory named <filename>linux-yocto</filename> and then add
                 a <filename>SRC_URI</filename> statement such as the following to the append file.
                 When the OpenEmbedded build system builds the kernel, the configuration options are
                 picked up and applied.
@@ -748,7 +748,7 @@
                                 <listitem><para>Instructions on how to boot the BSP build from
                                     the BSP layer.</para></listitem>
                                 <listitem><para>Instructions on how to boot the binary images
-                                    contained in the <filename>/binary</filename> directory,
+                                    contained in the <filename>binary</filename> directory,
                                     if present.</para></listitem>
                                 <listitem><para>Information on any known bugs or issues that users
                                     should know about when either building or booting the BSP
@@ -759,7 +759,7 @@
                             <filename>meta-&lt;bsp_name&gt;</filename> directory.
                             This file specifies exactly where you can find the sources used to
                             generate the binary images contained in the
-                            <filename>/binary</filename> directory, if present.
+                            <filename>binary</filename> directory, if present.
                             See the
                             <ulink url='&YOCTO_GIT_URL;/cgit.cgi/meta-intel/tree/meta-fri2/README.sources'><filename>README.sources</filename></ulink>
                             file for the Fish River Island 2 BSP in the <filename>meta-fri2</filename> BSP layer
diff --git a/documentation/dev-manual/dev-manual-common-tasks.xml b/documentation/dev-manual/dev-manual-common-tasks.xml
index 4aecb449f3..7d5063b79b 100644
--- a/documentation/dev-manual/dev-manual-common-tasks.xml
+++ b/documentation/dev-manual/dev-manual-common-tasks.xml
@@ -357,7 +357,7 @@
                             to cause the build to use your own version of
                             the file.
                             For example, an append file in your layer at
-                            <filename>/meta-one/recipes-core/base-files/base-files.bbappend</filename>
+                            <filename>meta-one/recipes-core/base-files/base-files.bbappend</filename>
                             could extend
                             <ulink url='&YOCTO_DOCS_REF_URL;#var-FILESPATH'><filename>FILESPATH</filename></ulink>
                             using
@@ -369,7 +369,7 @@
                             The build for machine "one" will pick up your
                             machine-specific file as long as you have the
                             file in
-                            <filename>/meta-one/recipes-core/base-files/base-files/</filename>.
+                            <filename>meta-one/recipes-core/base-files/base-files/</filename>.
                             However, if you are building for a different
                             machine and the
                             <filename>bblayers.conf</filename> file includes
@@ -384,9 +384,9 @@
                             the file in a subdirectory specific to the
                             machine.
                             For example, rather than placing the file in
-                            <filename>/meta-one/recipes-core/base-files/base-files/</filename>
+                            <filename>meta-one/recipes-core/base-files/base-files/</filename>
                             as shown above, put it in
-                            <filename>/meta-one/recipes-core/base-files/base-files/one/</filename>.
+                            <filename>meta-one/recipes-core/base-files/base-files/one/</filename>.
                             Not only does this make sure the file is used
                             only when building for machine "one" but the
                             build process locates the file more quickly.</para>
@@ -1957,7 +1957,7 @@
                 <link linkend='source-directory'>Source Directory</link>
                 top-level folder is <filename>~/poky</filename>:
                 <literallayout class='monospaced'>
-     $ cd ~/poky
+     $ cd poky
      $ source oe-init-build-env
      $ bitbake linux-yocto -c menuconfig
                 </literallayout>
@@ -2006,7 +2006,7 @@
                 <filename>x86</filename> architecture, the
                 <filename>.config</filename> file would be located here:
                 <literallayout class='monospaced'>
-     ~/poky/build/tmp/work/qemux86-poky-linux/linux-yocto-3.4.11+git1+84f...
+     poky/build/tmp/work/qemux86-poky-linux/linux-yocto-3.4.11+git1+84f...
         ...656ed30-r1/linux-qemux86-standard-build
                 </literallayout>
                 <note>
@@ -2079,7 +2079,7 @@
                 kernel's configuration.
                 For example, suppose you had a set of configuration options in a file called
                 <filename>myconfig.cfg</filename>.
-                If you put that file inside a directory named <filename>/linux-yocto</filename>
+                If you put that file inside a directory named <filename>linux-yocto</filename>
                 that resides in the same directory as the kernel's append file and then add
                 a <filename>SRC_URI</filename> statement such as the following to the kernel's append file,
                 those configuration options will be picked up and applied when the kernel is built.
@@ -5271,7 +5271,7 @@
                     <listitem><para>You have checked out the
                         <filename>dora-toaster</filename> branch:
                         <literallayout class='monospaced'>
-     $ cd ~/poky
+     $ cd poky
      $ git checkout -b dora-toaster origin/dora-toaster
                         </literallayout></para></listitem>
                     <listitem><para>Be sure your build machine has
@@ -5629,7 +5629,7 @@
                 <para>
                     Downloaded archives reside in the
                     <link linkend='build-directory'>Build Directory</link> in
-                    <filename>/tmp</filename> and are cleared up when they are no longer in use.
+                    <filename>tmp</filename> and are cleared up when they are no longer in use.
                 </para>
 
                 <para>
diff --git a/documentation/dev-manual/dev-manual-model.xml b/documentation/dev-manual/dev-manual-model.xml
index 46cd5b30a1..8b0bfc6fa8 100644
--- a/documentation/dev-manual/dev-manual-model.xml
+++ b/documentation/dev-manual/dev-manual-model.xml
@@ -1675,7 +1675,7 @@
             the following is the work directory for the <filename>acl</filename> recipe that
             creates the <filename>acl</filename> package:
             <literallayout class='monospaced'>
-     ~/poky/build/tmp/work/i586-poky-linux/acl/2.2.51-r3/
+     poky/build/tmp/work/i586-poky-linux/acl/2.2.51-r3/
             </literallayout>
         </para>
 
@@ -1691,8 +1691,8 @@
             for the <filename>acl</filename> package that is being
             built for a MIPS-based device:
             <literallayout class='monospaced'>
-     ~/poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2
-     ~/poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2/acl-2.2.51
+     poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2
+     poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2/acl-2.2.51
             </literallayout>
         </para>
 
diff --git a/documentation/dev-manual/dev-manual-newbie.xml b/documentation/dev-manual/dev-manual-newbie.xml
index 0dc4bd58bb..600c789a6d 100644
--- a/documentation/dev-manual/dev-manual-newbie.xml
+++ b/documentation/dev-manual/dev-manual-newbie.xml
@@ -1462,8 +1462,8 @@
                     <para>For help on using these scripts, simply provide the
                     <filename>-h</filename> argument as follows:
                     <literallayout class='monospaced'>
-     $ ~/poky/scripts/create-pull-request -h
-     $ ~/poky/scripts/send-pull-request -h
+     $ poky/scripts/create-pull-request -h
+     $ poky/scripts/send-pull-request -h
                     </literallayout></para></listitem>
             </itemizedlist>
         </para>
diff --git a/documentation/kernel-dev/kernel-dev-maint-appx.xml b/documentation/kernel-dev/kernel-dev-maint-appx.xml
index 5f9788aa31..a7c144ff75 100644
--- a/documentation/kernel-dev/kernel-dev-maint-appx.xml
+++ b/documentation/kernel-dev/kernel-dev-maint-appx.xml
@@ -45,7 +45,7 @@
             Here is an example that assumes the local Git repository for the kernel is in
             a top-level directory named <filename>linux-yocto-3.4</filename>:
             <literallayout class='monospaced'>
-     $ cd ~/linux-yocto-3.4
+     $ cd linux-yocto-3.4
      $ git checkout -b meta origin/meta
             </literallayout>
             Once you have checked out and switched to the <filename>meta</filename> branch,
@@ -208,7 +208,7 @@
             the build tree directory.
             The files include the final <filename>.config</filename> file, all the <filename>.o</filename>
             files, the <filename>.a</filename> files, and so forth.
-            Since each machine or BSP has its own separate 
+            Since each machine or BSP has its own separate
             <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
             in its own separate branch
             of the Git repository, you can easily switch between different builds.
diff --git a/documentation/ref-manual/migration.xml b/documentation/ref-manual/migration.xml
index a3a3e88a07..dc24628e3c 100644
--- a/documentation/ref-manual/migration.xml
+++ b/documentation/ref-manual/migration.xml
@@ -829,10 +829,10 @@
     </section>
 
     <section id='migration-1.5-run'>
-        <title><filename>/run</filename></title>
+        <title><filename>run</filename></title>
 
         <para>
-            The <filename>/run</filename> directory from the Filesystem
+            The <filename>run</filename> directory from the Filesystem
             Hierarchy Standard 3.0 has been introduced.
             You can find some of the implications for this change
             <ulink url='http://cgit.openembedded.org/openembedded-core/commit/?id=0e326280a15b0f2c4ef2ef4ec441f63f55b75873'>here</ulink>.
@@ -1033,7 +1033,7 @@
                     </para></listitem>
                 <listitem><para>
                     <filename>base-files</filename>: Remove the unnecessary
-                    <filename>/media/xxx</filename> directories.
+                    <filename>media/xxx</filename> directories.
                     </para></listitem>
                 <listitem><para>
                     <filename>alsa-state</filename>: Provide an empty
diff --git a/documentation/ref-manual/ref-bitbake.xml b/documentation/ref-manual/ref-bitbake.xml
index b587d46caa..e24ea45281 100644
--- a/documentation/ref-manual/ref-bitbake.xml
+++ b/documentation/ref-manual/ref-bitbake.xml
@@ -222,7 +222,7 @@
         <para>
             As each task completes, a timestamp is written to the directory specified by the
             <filename><link linkend='var-STAMP'>STAMP</link></filename> variable.
-            On subsequent runs, BitBake looks within the <filename>/build/tmp/stamps</filename>
+            On subsequent runs, BitBake looks within the <filename>build/tmp/stamps</filename>
             directory and does not rerun
             tasks that are already completed unless a timestamp is found to be invalid.
             Currently, invalid timestamps are only considered on a per
diff --git a/documentation/ref-manual/ref-features.xml b/documentation/ref-manual/ref-features.xml
index 3f216e3a64..dedcf67e33 100644
--- a/documentation/ref-manual/ref-features.xml
+++ b/documentation/ref-manual/ref-features.xml
@@ -38,7 +38,7 @@
         Here is an example that discovers the recipes whose build is potentially
         changed based on a given feature:
         <literallayout class='monospaced'>
-     $ cd $HOME/poky
+     $ cd poky
      $ git grep 'contains.*MACHINE_FEATURES.*&lt;feature&gt;'
         </literallayout>
     </para>
diff --git a/documentation/ref-manual/ref-variables.xml b/documentation/ref-manual/ref-variables.xml
index 84deee8899..2b0e8909fe 100644
--- a/documentation/ref-manual/ref-variables.xml
+++ b/documentation/ref-manual/ref-variables.xml
@@ -701,10 +701,10 @@
                 <para>
                     The following example uses a complete regular expression
                     to tell BitBake to ignore all recipe and recipe append
-                    files in the <filename>/meta-ti/recipes-misc/</filename>
+                    files in the <filename>meta-ti/recipes-misc/</filename>
                     directory:
                     <literallayout class='monospaced'>
-     BBMASK = "/meta-ti/recipes-misc/"
+     BBMASK = "meta-ti/recipes-misc/"
                     </literallayout>
                     If you want to mask out multiple directories or recipes,
                     use the vertical bar to separate the regular expression
@@ -999,7 +999,7 @@
                     <filename>/etc</filename> or <filename>${bindir}</filename> rather
                     than <filename>/usr/bin</filename>.
                     You can find a list of these variables at the top of the
-                    <filename>/meta/conf/bitbake.conf</filename> file in the
+                    <filename>meta/conf/bitbake.conf</filename> file in the
                     <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
                 </note>
             </glossdef>
@@ -1036,7 +1036,7 @@
             <glossdef>
                 <para>
                     Specifies the parent directory of the OpenEmbedded
-                    Core Metadata layer (i.e. <filename>/meta</filename>).
+                    Core Metadata layer (i.e. <filename>meta</filename>).
                 </para>
 
                 <para>
@@ -1362,7 +1362,7 @@
                 <para>
                     You can set this directory by defining the
                     <filename>DL_DIR</filename> variable in the
-                    <filename>/conf/local.conf</filename> file.
+                    <filename>conf/local.conf</filename> file.
                     This directory is self-maintaining and you should not have
                     to touch it.
                     By default, the directory is <filename>downloads</filename>
@@ -1712,7 +1712,7 @@
                     <filename>/etc</filename>, or <filename>${bindir}</filename> rather
                     than <filename>/usr/bin</filename>.
                     You can find a list of these variables at the top of the
-                    <filename>/meta/conf/bitbake.conf</filename> file in the
+                    <filename>meta/conf/bitbake.conf</filename> file in the
                     <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
                 </note>
 
@@ -2068,7 +2068,7 @@
                     to a default value using the <filename>?=</filename> operator, using a
                     <filename>+=</filename> operation against <filename>IMAGE_INSTALL</filename>
                     will result in unexpected behavior when used in
-                    <filename>/conf/local.conf</filename>.
+                    <filename>conf/local.conf</filename>.
                     Furthermore, the same operation from within an image recipe may or may not
                     succeed depending on the specific situation.
                     In both these cases, the behavior is contrary to how most users expect
@@ -4770,7 +4770,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     to keep the unpacked recipe for <filename>db</filename>
                     is the following:
                     <literallayout class='monospaced'>
-     ~/poky/build/tmp/work/qemux86-poky-linux/db/5.1.19-r3/db-5.1.19
+     poky/build/tmp/work/qemux86-poky-linux/db/5.1.19-r3/db-5.1.19
                     </literallayout>
                 </para>
             </glossdef>
@@ -5888,7 +5888,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     In this case, the working directory the build system uses to build
                     the <filename>v86d</filename> package is the following:
                     <literallayout class='monospaced'>
-     ~/poky/build/tmp/work/qemux86-poky-linux/v86d/01.9-r0
+     poky/build/tmp/work/qemux86-poky-linux/v86d/01.9-r0
                     </literallayout>
                 </para>
 
@@ -5905,7 +5905,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     the <filename>acl</filename> recipe, which is being built for a
                     MIPS-based device, is the following:
                     <literallayout class='monospaced'>
-     ~/poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2
+     poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2
                     </literallayout>
                 </para>
             </glossdef>
diff --git a/documentation/ref-manual/technical-details.xml b/documentation/ref-manual/technical-details.xml
index 4d1c2e3f4e..6d4c6b712c 100644
--- a/documentation/ref-manual/technical-details.xml
+++ b/documentation/ref-manual/technical-details.xml
@@ -1149,7 +1149,7 @@
             recipe-by-recipe basis through the <filename>LICENSE_FLAGS</filename> variable
             definition in the affected recipe.
             For instance, the
-            <filename>$HOME/poky/meta/recipes-multimedia/gstreamer/gst-plugins-ugly</filename>
+            <filename>poky/meta/recipes-multimedia/gstreamer/gst-plugins-ugly</filename>
             recipe contains the following statement:
             <literallayout class='monospaced'>
      LICENSE_FLAGS = "commercial"
@@ -1165,7 +1165,7 @@
                 <filename>LICENSE_FLAGS_WHITELIST</filename> variable, which is a variable
                 typically defined in your <filename>local.conf</filename> file.
             For example, to enable
-                the <filename>$HOME/poky/meta/recipes-multimedia/gstreamer/gst-plugins-ugly</filename>
+                the <filename>poky/meta/recipes-multimedia/gstreamer/gst-plugins-ugly</filename>
                 package, you could add either the string
                 "commercial_gst-plugins-ugly" or the more general string
                 "commercial" to <filename>LICENSE_FLAGS_WHITELIST</filename>.
@@ -1312,7 +1312,7 @@
             <para>
                 Other helpful variables related to commercial
                 license handling exist and are defined in the
-                <filename>$HOME/poky/meta/conf/distro/include/default-distrovars.inc</filename> file:
+                <filename>poky/meta/conf/distro/include/default-distrovars.inc</filename> file:
                 <literallayout class='monospaced'>
      COMMERCIAL_AUDIO_PLUGINS ?= ""
      COMMERCIAL_VIDEO_PLUGINS ?= ""
diff --git a/documentation/ref-manual/usingpoky.xml b/documentation/ref-manual/usingpoky.xml
index 49166e15bf..b9df733f3f 100644
--- a/documentation/ref-manual/usingpoky.xml
+++ b/documentation/ref-manual/usingpoky.xml
@@ -62,7 +62,7 @@
         <para>
             The <filename>target</filename> is the name of the recipe you want to build.
             Common targets are the images in <filename>meta/recipes-core/images</filename>,
-            <filename>/meta/recipes-sato/images</filename>, etc. all found in the
+            <filename>meta/recipes-sato/images</filename>, etc. all found in the
             <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
             Or, the target can be the name of a recipe for a specific piece of software such as
             BusyBox.