summaryrefslogtreecommitdiffstats
path: root/documentation
diff options
context:
space:
mode:
authorScott Rifenbark <scott.m.rifenbark@intel.com>2013-09-19 13:16:53 -0700
committerRichard Purdie <richard.purdie@linuxfoundation.org>2013-09-22 12:20:49 +0100
commitf3455db0841e4d2cb94fb6d338e4b9ddc42c8bed (patch)
tree4ad1182d5f2e207cc466fd2d648ab8fb7f5a4ec6 /documentation
parent9fbaa9b9ec8e1295b51fdbbf42404b66c7557163 (diff)
downloadpoky-f3455db0841e4d2cb94fb6d338e4b9ddc42c8bed.tar.gz
dev-manual: Misc formatting and setup for Kepler support
I went through the "Working Within Eclipse" section and set up structure to add in the Kepler support and drop the Indigo support. Along the way, I formatted the entire section to hit within the 40-character limit exclusive of the links, which always overrun. (From yocto-docs rev: 762291589382f7ef71e77f8c92dae2371f3ae6e7) Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Diffstat (limited to 'documentation')
-rw-r--r--documentation/dev-manual/dev-manual-model.xml1089
1 files changed, 613 insertions, 476 deletions
diff --git a/documentation/dev-manual/dev-manual-model.xml b/documentation/dev-manual/dev-manual-model.xml
index efa50b05ff..3474d05546 100644
--- a/documentation/dev-manual/dev-manual-model.xml
+++ b/documentation/dev-manual/dev-manual-model.xml
@@ -131,7 +131,7 @@
131 <ulink url='&YOCTO_DOCS_BSP_URL;#creating-a-new-bsp-layer-using-the-yocto-bsp-script'><filename>yocto-bsp</filename></ulink> script</emphasis>: 131 <ulink url='&YOCTO_DOCS_BSP_URL;#creating-a-new-bsp-layer-using-the-yocto-bsp-script'><filename>yocto-bsp</filename></ulink> script</emphasis>:
132 Layers are ideal for 132 Layers are ideal for
133 isolating and storing work for a given piece of hardware. 133 isolating and storing work for a given piece of hardware.
134 A layer is really just a location or area in which you place 134 A layer is really just a location or area in which you place
135 the recipes and configurations for your BSP. 135 the recipes and configurations for your BSP.
136 In fact, a BSP is, in itself, a special type of layer. 136 In fact, a BSP is, in itself, a special type of layer.
137 The simplest way to create a new BSP layer that is compliant with the 137 The simplest way to create a new BSP layer that is compliant with the
@@ -165,7 +165,7 @@
165 Romley, sys940x, Sugar Bay, and tlk exist in their own separate layers 165 Romley, sys940x, Sugar Bay, and tlk exist in their own separate layers
166 within the larger <filename>meta-intel</filename> layer.</note> 166 within the larger <filename>meta-intel</filename> layer.</note>
167 <para>When you set up a layer for a new BSP, you should follow a standard layout. 167 <para>When you set up a layer for a new BSP, you should follow a standard layout.
168 This layout is described in the 168 This layout is described in the
169 "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-filelayout'>Example Filesystem Layout</ulink>" 169 "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-filelayout'>Example Filesystem Layout</ulink>"
170 section of the Board Support Package (BSP) Development Guide. 170 section of the Board Support Package (BSP) Development Guide.
171 In the standard layout, you will notice a suggested structure for recipes and 171 In the standard layout, you will notice a suggested structure for recipes and
@@ -343,10 +343,10 @@
343 If you are working in the kernel all the time, you probably would want 343 If you are working in the kernel all the time, you probably would want
344 to set up your own local Git repository of the kernel tree. 344 to set up your own local Git repository of the kernel tree.
345 If you just need to make some patches to the kernel, you can access 345 If you just need to make some patches to the kernel, you can access
346 temporary kernel source files that were extracted and used 346 temporary kernel source files that were extracted and used
347 during a build. 347 during a build.
348 We will just talk about working with the temporary source code. 348 We will just talk about working with the temporary source code.
349 For more information on how to get kernel source code onto your 349 For more information on how to get kernel source code onto your
350 host system, see the 350 host system, see the
351 "<link linkend='local-kernel-files'>Yocto Project Kernel</link>" 351 "<link linkend='local-kernel-files'>Yocto Project Kernel</link>"
352 bulleted item earlier in the manual. 352 bulleted item earlier in the manual.
@@ -411,7 +411,7 @@
411 "<link linkend='local-yp-release'>Yocto Project Release</link>" earlier in this manual. 411 "<link linkend='local-yp-release'>Yocto Project Release</link>" earlier in this manual.
412 </para></listitem> 412 </para></listitem>
413 <listitem><para><emphasis>Establish the temporary kernel source files</emphasis>: 413 <listitem><para><emphasis>Establish the temporary kernel source files</emphasis>:
414 Temporary kernel source files are kept in the 414 Temporary kernel source files are kept in the
415 <link linkend='build-directory'>Build Directory</link> 415 <link linkend='build-directory'>Build Directory</link>
416 created by the 416 created by the
417 OpenEmbedded build system when you run BitBake. 417 OpenEmbedded build system when you run BitBake.
@@ -474,7 +474,7 @@
474 Application development involves creating an application that you want 474 Application development involves creating an application that you want
475 to run on your target hardware, which is running a kernel image created using the 475 to run on your target hardware, which is running a kernel image created using the
476 OpenEmbedded build system. 476 OpenEmbedded build system.
477 The Yocto Project provides an 477 The Yocto Project provides an
478 <ulink url='&YOCTO_DOCS_ADT_URL;#adt-intro-section'>Application Development Toolkit (ADT)</ulink> 478 <ulink url='&YOCTO_DOCS_ADT_URL;#adt-intro-section'>Application Development Toolkit (ADT)</ulink>
479 and stand-alone 479 and stand-alone
480 <ulink url='&YOCTO_DOCS_ADT_URL;#the-cross-development-toolchain'>cross-development toolchains</ulink> 480 <ulink url='&YOCTO_DOCS_ADT_URL;#the-cross-development-toolchain'>cross-development toolchains</ulink>
@@ -605,26 +605,29 @@
605 <title>Working Within Eclipse</title> 605 <title>Working Within Eclipse</title>
606 606
607 <para> 607 <para>
608 The Eclipse IDE is a popular development environment and it fully supports 608 The Eclipse IDE is a popular development environment and it fully
609 development using the Yocto Project. 609 supports development using the Yocto Project.
610 <note>This release of the Yocto Project supports both the Juno and Indigo versions 610 <note>
611 of the Eclipse IDE. 611 This release of the Yocto Project supports both the Kepler
612 Thus, the following information provides setup information for both versions. 612 and Juno versions of the Eclipse IDE.
613 Thus, the following information provides setup information for
614 both versions.
613 </note> 615 </note>
614 </para> 616 </para>
615 617
616 <para> 618 <para>
617 When you install and configure the Eclipse Yocto Project Plug-in into 619 When you install and configure the Eclipse Yocto Project Plug-in
618 the Eclipse IDE, you maximize your Yocto Project experience. 620 into the Eclipse IDE, you maximize your Yocto Project experience.
619 Installing and configuring the Plug-in results in an environment that 621 Installing and configuring the Plug-in results in an environment
620 has extensions specifically designed to let you more easily develop software. 622 that has extensions specifically designed to let you more easily
621 These extensions allow for cross-compilation, deployment, and execution of 623 develop software.
622 your output into a QEMU emulation session as well as actual target 624 These extensions allow for cross-compilation, deployment, and
623 hardware. 625 execution of your output into a QEMU emulation session as well as
626 actual target hardware.
624 You can also perform cross-debugging and profiling. 627 You can also perform cross-debugging and profiling.
625 The environment also supports a suite of tools that allows you to perform 628 The environment also supports a suite of tools that allows you
626 remote profiling, tracing, collection of power data, collection of 629 to perform remote profiling, tracing, collection of power data,
627 latency data, and collection of performance data. 630 collection of latency data, and collection of performance data.
628 </para> 631 </para>
629 632
630 <para> 633 <para>
@@ -638,15 +641,20 @@
638 <para> 641 <para>
639 To develop within the Eclipse IDE, you need to do the following: 642 To develop within the Eclipse IDE, you need to do the following:
640 <orderedlist> 643 <orderedlist>
641 <listitem><para>Install the optimal version of the Eclipse IDE.</para></listitem> 644 <listitem><para>Install the optimal version of the Eclipse
642 <listitem><para>Configure the Eclipse IDE.</para></listitem> 645 IDE.</para></listitem>
643 <listitem><para>Install the Eclipse Yocto Plug-in.</para></listitem> 646 <listitem><para>Configure the Eclipse IDE.
644 <listitem><para>Configure the Eclipse Yocto Plug-in.</para></listitem> 647 </para></listitem>
648 <listitem><para>Install the Eclipse Yocto Plug-in.
649 </para></listitem>
650 <listitem><para>Configure the Eclipse Yocto Plug-in.
651 </para></listitem>
645 </orderedlist> 652 </orderedlist>
646 <note> 653 <note>
647 Do not install Eclipse from your distribution's package repository. 654 Do not install Eclipse from your distribution's package
648 Be sure to install Eclipse from the official Eclipse download site as directed 655 repository.
649 in the next section. 656 Be sure to install Eclipse from the official Eclipse
657 download site as directed in the next section.
650 </note> 658 </note>
651 </para> 659 </para>
652 660
@@ -654,89 +662,69 @@
654 <title>Installing the Eclipse IDE</title> 662 <title>Installing the Eclipse IDE</title>
655 663
656 <para> 664 <para>
657 It is recommended that you have the Juno 4.2 version of the 665 It is recommended that you have the Kepler 4.3 version of
658 Eclipse IDE installed on your development system. 666 the Eclipse IDE installed on your development system.
659 However, if you currently have the Indigo 3.7.2 version installed and you do 667 However, if you currently have the Juno 4.2 version
660 not want to upgrade the IDE, you can configure Indigo to work with the 668 installed and you do not want to upgrade the IDE, you can
661 Yocto Project. 669 configure Juno to work with the Yocto Project.
662 See the 670 See the
663 "<link linkend='configuring-the-eclipse-ide-indigo'>Configuring the Eclipse IDE (Indigo)</link>" 671 "<link linkend='configuring-the-eclipse-ide-juno'>Configuring the Eclipse IDE (Juno)</link>"
664 section. 672 section.
665 </para> 673 </para>
666 674
667 <para> 675 <para>
668 If you do not have the Juno 4.2 Eclipse IDE installed, you can find the tarball at 676 If you do not have the Kepler 4.3 Eclipse IDE installed, you
677 can find the tarball at
669 <ulink url='&ECLIPSE_MAIN_URL;'></ulink>. 678 <ulink url='&ECLIPSE_MAIN_URL;'></ulink>.
670 From that site, choose the Eclipse Classic version particular to your development 679 From that site, choose the Eclipse Standard 4.3 version
671 host. 680 particular to your development host.
672 This version contains the Eclipse Platform, the Java Development 681 This version contains the Eclipse Platform, the Java
673 Tools (JDT), and the Plug-in Development Environment. 682 Development Tools (JDT), and the Plug-in Development
683 Environment.
674 </para> 684 </para>
675 685
676 <para> 686 <para>
677 Once you have downloaded the tarball, extract it into a clean 687 Once you have downloaded the tarball, extract it into a
678 directory. 688 clean directory.
679 For example, the following commands unpack and install the 689 For example, the following commands unpack and install the
680 downloaded Eclipse IDE tarball into a clean directory 690 downloaded Eclipse IDE tarball into a clean directory
681 using the default name <filename>eclipse</filename>: 691 using the default name <filename>eclipse</filename>:
682 <literallayout class='monospaced'> 692 <literallayout class='monospaced'>
683 $ cd ~ 693 $ cd ~
684 $ tar -xzvf ~/Downloads/eclipse-SDK-4.2-linux-gtk-x86_64.tar.gz 694 $ tar -xzvf ~/Downloads/eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz
685 </literallayout>
686 </para>
687
688 <para>
689 If you have the Indigo 3.7.2 Eclipse IDE already installed and you want to use that
690 version, one issue exists that you need to be aware of regarding the Java
691 Virtual machine’s garbage collection (GC) process.
692 The GC process does not clean up the permanent generation
693 space (PermGen).
694 This space stores metadata descriptions of classes.
695 The default value is set too small and it could trigger an
696 out-of-memory error such as the following:
697 <literallayout class='monospaced'>
698 Java.lang.OutOfMemoryError: PermGen space
699 </literallayout>
700 </para>
701
702 <para>
703 This error causes the application to hang.
704 </para>
705
706 <para>
707 To fix this issue, you can use the <filename>--vmargs</filename>
708 option when you start the Indigo 3.7.2 Eclipse IDE
709 to increase the size of the permanent generation space:
710 <literallayout class='monospaced'>
711 eclipse --vmargs --XX:PermSize=256M
712 </literallayout> 695 </literallayout>
713 </para> 696 </para>
714 </section> 697 </section>
715 698
716 <section id='configuring-the-eclipse-ide-juno'> 699 <section id='configuring-the-eclipse-ide-kepler'>
717 <title>Configuring the Eclipse IDE (Juno)</title> 700 <title>Configuring the Eclipse IDE (Kepler)</title>
718 701
719 <para> 702 <para>
720 This section presents the steps needed to configure the Juno 4.2 Eclipse IDE. 703 This section presents the steps needed to configure the
721 If you are using Indigo 3.7.2, see the 704 Kepler 4.3 Eclipse IDE.
722 "<link linkend='configuring-the-eclipse-ide-indigo'>Configuring the Eclipse IDE (Indigo)</link>". 705 If you are using Juno 4.2, see the
706 "<link linkend='configuring-the-eclipse-ide-juno'>Configuring the Eclipse IDE (Juno)</link>".
723 </para> 707 </para>
724 708
725 <para> 709 <para>
726 Before installing and configuring the Eclipse Yocto Plug-in, you need to configure 710 Before installing and configuring the Eclipse Yocto Plug-in,
727 the Juno 4.2 Eclipse IDE. 711 you need to configure the Kepler 4.3 Eclipse IDE.
728 Follow these general steps: 712 Follow these general steps:
729 <orderedlist> 713 <orderedlist>
730 <listitem><para>Start the Eclipse IDE.</para></listitem> 714 <listitem><para>Start the Eclipse IDE.</para></listitem>
731 <listitem><para>Make sure you are in your Workbench and select 715 <listitem><para>Make sure you are in your Workbench and
732 "Install New Software" from the "Help" pull-down menu. 716 select "Install New Software" from the "Help"
717 pull-down menu.</para></listitem>
718 <listitem><para>Select
719 <filename>Juno - &ECLIPSE_JUNO_URL;</filename>
720 from the "Work with:" pull-down menu.
733 </para></listitem> 721 </para></listitem>
734 <listitem><para>Select <filename>Juno - &ECLIPSE_JUNO_URL;</filename> 722 <listitem><para>Expand the box next to "Linux Tools"
735 from the "Work with:" pull-down menu.</para></listitem> 723 and select the
736 <listitem><para>Expand the box next to "Linux Tools" and select the 724 <filename>LTTng - Linux Tracing Toolkit</filename>
737 <filename>LTTng - Linux Tracing Toolkit</filename> boxes.</para></listitem> 725 boxes.</para></listitem>
738 <listitem><para>Expand the box next to "Mobile and Device Development" and select the 726 <listitem><para>Expand the box next to "Mobile and
739 following boxes: 727 Device Development" and select the following boxes:
740 <itemizedlist> 728 <itemizedlist>
741 <listitem><para><filename>C/C++ Remote Launch</filename></para></listitem> 729 <listitem><para><filename>C/C++ Remote Launch</filename></para></listitem>
742 <listitem><para><filename>Remote System Explorer End-user Runtime</filename></para></listitem> 730 <listitem><para><filename>Remote System Explorer End-user Runtime</filename></para></listitem>
@@ -745,70 +733,59 @@
745 <listitem><para><filename>TCF Remote System Explorer add-in</filename></para></listitem> 733 <listitem><para><filename>TCF Remote System Explorer add-in</filename></para></listitem>
746 <listitem><para><filename>TCF Target Explorer</filename></para></listitem> 734 <listitem><para><filename>TCF Target Explorer</filename></para></listitem>
747 </itemizedlist></para></listitem> 735 </itemizedlist></para></listitem>
748 <listitem><para>Expand the box next to "Programming Languages" 736 <listitem><para>Expand the box next to "Programming
749 and select the <filename>Autotools Support for CDT</filename> 737 Languages" and select the
750 and <filename>C/C++ Development Tools</filename> boxes.</para></listitem> 738 <filename>Autotools Support for CDT</filename>
751 <listitem><para>Complete the installation and restart the Eclipse IDE.</para></listitem> 739 and <filename>C/C++ Development Tools</filename>
740 boxes.</para></listitem>
741 <listitem><para>Complete the installation and restart
742 the Eclipse IDE.</para></listitem>
752 </orderedlist> 743 </orderedlist>
753 </para> 744 </para>
754 </section> 745 </section>
755 746
756 <section id='configuring-the-eclipse-ide-indigo'> 747 <section id='configuring-the-eclipse-ide-juno'>
757 <title>Configuring the Eclipse IDE (Indigo)</title> 748 <title>Configuring the Eclipse IDE (Juno)</title>
758 749
759 <para> 750 <para>
760 This section presents the steps needed to configure the Indigo 3.7.2 Eclipse IDE. 751 This section presents the steps needed to configure the
761 If you are using Juno 4.2, see the 752 Juno 4.2 Eclipse IDE.
762 "<link linkend='configuring-the-eclipse-ide-juno'>Configuring the Eclipse IDE (Juno)</link>".
763 </para> 753 </para>
764 754
765 <para> 755 <para>
766 Before installing and configuring the Eclipse Yocto Plug-in, you need to configure 756 Before installing and configuring the Eclipse Yocto Plug-in,
767 the Indigo 3.7.2 Eclipse IDE. 757 you need to configure the Juno 4.2 Eclipse IDE.
768 Follow these general steps: 758 Follow these general steps:
769 <orderedlist> 759 <orderedlist>
770 <listitem><para>Start the Eclipse IDE.</para></listitem> 760 <listitem><para>Start the Eclipse IDE.</para></listitem>
771 <listitem><para>Make sure you are in your Workbench and select 761 <listitem><para>Make sure you are in your Workbench and
772 "Install New Software" from the "Help" pull-down menu. 762 select "Install New Software" from the "Help"
773 </para></listitem> 763 pull-down menu.</para></listitem>
774 <listitem><para>Select <filename>indigo - &ECLIPSE_INDIGO_URL;</filename> 764 <listitem><para>Select
775 from the "Work with:" pull-down menu.</para></listitem> 765 <filename>Juno - &ECLIPSE_JUNO_URL;</filename>
776 <listitem><para>Expand the box next to "Programming Languages" 766 from the "Work with:" pull-down menu.
777 and select the <filename>Autotools Support for CDT (incubation)</filename>
778 and <filename>C/C++ Development Tools</filename> boxes.</para></listitem>
779 <listitem><para>Expand the box next to "Linux Tools" and select the
780 <filename>LTTng - Linux Tracing Toolkit(incubation)</filename>
781 boxes.</para></listitem>
782 <listitem><para>Complete the installation and restart the Eclipse IDE.</para></listitem>
783 <listitem><para>After the Eclipse IDE restarts and from the Workbench, select
784 "Install New Software" from the "Help" pull-down menu.</para></listitem>
785 <listitem><para>Click the
786 "Available Software Sites" link.</para></listitem>
787 <listitem><para>Check the box next to
788 <filename>&ECLIPSE_UPDATES_URL;</filename>
789 and click "OK".</para></listitem>
790 <listitem><para>Select <filename>&ECLIPSE_UPDATES_URL;</filename>
791 from the "Work with:" pull-down menu.</para></listitem>
792 <listitem><para>Check the box next to <filename>TM and RSE Main Features</filename>.
793 </para></listitem> 767 </para></listitem>
794 <listitem><para>Expand the box next to <filename>TM and RSE Optional Add-ons</filename> 768 <listitem><para>Expand the box next to "Linux Tools"
795 and select every item except <filename>RSE Unit Tests</filename> and 769 and select the
796 <filename>RSE WinCE Services (incubation)</filename>.</para></listitem> 770 <filename>LTTng - Linux Tracing Toolkit</filename> boxes.
797 <listitem><para>Complete the installation and restart the Eclipse IDE.</para></listitem>
798 <listitem><para>If necessary, select
799 "Install New Software" from the "Help" pull-down menu so you can click the
800 "Available Software Sites" link again.</para></listitem>
801 <listitem><para>After clicking "Available Software Sites", check the box next to
802 <filename>http://download.eclipse.org/tools/cdt/releases/indigo</filename>
803 and click "OK".</para></listitem>
804 <listitem><para>Select <filename>&ECLIPSE_INDIGO_CDT_URL;</filename>
805 from the "Work with:" pull-down menu.</para></listitem>
806 <listitem><para>Check the box next to <filename>CDT Main Features</filename>.
807 </para></listitem> 771 </para></listitem>
808 <listitem><para>Expand the box next to "CDT Optional Features" 772 <listitem><para>Expand the box next to "Mobile and
809 and select <filename>C/C++ Remote Launch</filename> and 773 Device Development" and select the following boxes:
810 <filename>Target Communication Framework (incubation)</filename>.</para></listitem> 774 <itemizedlist>
811 <listitem><para>Complete the installation and restart the Eclipse IDE.</para></listitem> 775 <listitem><para><filename>C/C++ Remote Launch</filename></para></listitem>
776 <listitem><para><filename>Remote System Explorer End-user Runtime</filename></para></listitem>
777 <listitem><para><filename>Remote System Explorer User Actions</filename></para></listitem>
778 <listitem><para><filename>Target Management Terminal</filename></para></listitem>
779 <listitem><para><filename>TCF Remote System Explorer add-in</filename></para></listitem>
780 <listitem><para><filename>TCF Target Explorer</filename></para></listitem>
781 </itemizedlist></para></listitem>
782 <listitem><para>Expand the box next to "Programming
783 Languages" and select the
784 <filename>Autotools Support for CDT</filename>
785 and <filename>C/C++ Development Tools</filename>
786 boxes.</para></listitem>
787 <listitem><para>Complete the installation and restart
788 the Eclipse IDE.</para></listitem>
812 </orderedlist> 789 </orderedlist>
813 </para> 790 </para>
814 </section> 791 </section>
@@ -817,35 +794,46 @@
817 <title>Installing or Accessing the Eclipse Yocto Plug-in</title> 794 <title>Installing or Accessing the Eclipse Yocto Plug-in</title>
818 795
819 <para> 796 <para>
820 You can install the Eclipse Yocto Plug-in into the Eclipse IDE 797 You can install the Eclipse Yocto Plug-in into the Eclipse
821 one of two ways: use the Yocto Project's Eclipse Update site to install the pre-built plug-in, 798 IDE one of two ways: use the Yocto Project's Eclipse
822 or build and install the plug-in from the latest source code. 799 Update site to install the pre-built plug-in, or build and
823 If you do not want to permanently install the plug-in but just want to try it out 800 install the plug-in from the latest source code.
824 within the Eclipse environment, you can import the plug-in project from the 801 If you do not want to permanently install the plug-in but
825 Yocto Project's Source Repositories. 802 just want to try it out within the Eclipse environment,
803 you can import the plug-in project from the Yocto Project's
804 Source Repositories.
826 </para> 805 </para>
827 806
828 <section id='new-software'> 807 <section id='new-software'>
829 <title>Installing the Pre-built Plug-in from the Yocto Project Eclipse Update Site</title> 808 <title>Installing the Pre-built Plug-in from the Yocto Project Eclipse Update Site</title>
830 809
831 <para> 810 <para>
832 To install the Eclipse Yocto Plug-in from the update site, 811 To install the Eclipse Yocto Plug-in from the update
833 follow these steps: 812 site, follow these steps:
834 <orderedlist> 813 <orderedlist>
835 <listitem><para>Start up the Eclipse IDE.</para></listitem> 814 <listitem><para>Start up the Eclipse IDE.
836 <listitem><para>In Eclipse, select "Install New Software" from the "Help" menu.</para></listitem> 815 </para></listitem>
837 <listitem><para>Click "Add..." in the "Work with:" area.</para></listitem> 816 <listitem><para>In Eclipse, select "Install New
817 Software" from the "Help" menu.
818 </para></listitem>
819 <listitem><para>Click "Add..." in the "Work with:"
820 area.</para></listitem>
838 <listitem><para>Enter 821 <listitem><para>Enter
839 <filename>&ECLIPSE_DL_PLUGIN_URL;</filename> 822 <filename>&ECLIPSE_DL_PLUGIN_URL;</filename>
840 in the URL field and provide a meaningful name in the "Name" field.</para></listitem> 823 in the URL field and provide a meaningful name
841 <listitem><para>Click "OK" to have the entry added to the "Work with:" 824 in the "Name" field.</para></listitem>
842 drop-down list.</para></listitem> 825 <listitem><para>Click "OK" to have the entry added
843 <listitem><para>Select the entry for the plug-in from the "Work with:" drop-down 826 to the "Work with:" drop-down list.
844 list.</para></listitem> 827 </para></listitem>
845 <listitem><para>Check the box next to <filename>Development tools and SDKs for Yocto Linux</filename>. 828 <listitem><para>Select the entry for the plug-in
829 from the "Work with:" drop-down list.
846 </para></listitem> 830 </para></listitem>
847 <listitem><para>Complete the remaining software installation steps and 831 <listitem><para>Check the box next to
848 then restart the Eclipse IDE to finish the installation of the plug-in. 832 <filename>Development tools and SDKs for Yocto Linux</filename>.
833 </para></listitem>
834 <listitem><para>Complete the remaining software
835 installation steps and then restart the Eclipse
836 IDE to finish the installation of the plug-in.
849 </para></listitem> 837 </para></listitem>
850 </orderedlist> 838 </orderedlist>
851 </para> 839 </para>
@@ -855,71 +843,87 @@
855 <title>Installing the Plug-in Using the Latest Source Code</title> 843 <title>Installing the Plug-in Using the Latest Source Code</title>
856 844
857 <para> 845 <para>
858 To install the Eclipse Yocto Plug-in from the latest source code, follow these steps: 846 To install the Eclipse Yocto Plug-in from the latest
847 source code, follow these steps:
859 <orderedlist> 848 <orderedlist>
860 <listitem><para>Open a shell and create a Git repository with: 849 <listitem><para>Open a shell and create a Git
850 repository with:
861 <literallayout class='monospaced'> 851 <literallayout class='monospaced'>
862 $ git clone git://git.yoctoproject.org/eclipse-poky yocto-eclipse 852 $ git clone git://git.yoctoproject.org/eclipse-poky yocto-eclipse
863 </literallayout> 853 </literallayout>
864 For this example, the repository is named 854 For this example, the repository is named
865 <filename>~/yocto-eclipse</filename>.</para></listitem> 855 <filename>~/yocto-eclipse</filename>.
866 <listitem><para>Change to the directory where you set up 856 </para></listitem>
867 the Git repository: 857 <listitem><para>Change to the directory where you
858 set up the Git repository:
868 <literallayout class='monospaced'> 859 <literallayout class='monospaced'>
869 $ cd ~/yocto-eclipse 860 $ cd ~/yocto-eclipse
870 </literallayout></para></listitem> 861 </literallayout></para></listitem>
871 <listitem><para>Be sure you are in the right branch for your Git repository. 862 <listitem><para>Be sure you are in the right branch
872 For this release set the branch to <filename>&DISTRO_NAME;</filename>: 863 for your Git repository.
864 For this release set the branch to
865 <filename>&DISTRO_NAME;</filename>:
873 <literallayout class='monospaced'> 866 <literallayout class='monospaced'>
874 $ git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME; 867 $ git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME;
875 </literallayout></para></listitem> 868 </literallayout></para></listitem>
876 <listitem><para>Change to the <filename>scripts</filename> 869 <listitem><para>Change to the
870 <filename>scripts</filename>
877 directory within the Git repository: 871 directory within the Git repository:
878 <literallayout class='monospaced'> 872 <literallayout class='monospaced'>
879 $ cd scripts 873 $ cd scripts
880 </literallayout></para></listitem> 874 </literallayout></para></listitem>
881 <listitem><para>Set up the local build environment by running the 875 <listitem><para>Set up the local build environment
882 setup script: 876 by running the setup script:
883 <literallayout class='monospaced'> 877 <literallayout class='monospaced'>
884 $ ./setup.sh 878 $ ./setup.sh
885 </literallayout></para></listitem> 879 </literallayout></para></listitem>
886 <listitem><para>When the script finishes execution, it prompts 880 <listitem><para>When the script finishes execution,
887 you with instructions on how to run the 881 it prompts you with instructions on how to run
888 <filename>build.sh</filename> script, which is also in 882 the <filename>build.sh</filename> script, which
889 the <filename>scripts</filename> of the 883 is also in the <filename>scripts</filename> of
890 Git repository created earlier. 884 the Git repository created earlier.
891 </para></listitem> 885 </para></listitem>
892 <listitem><para>Run the <filename>build.sh</filename> script 886 <listitem><para>Run the <filename>build.sh</filename> script
893 as directed. 887 as directed.
894 Be sure to provide the name of the Git branch along with the 888 Be sure to provide the name of the Git branch
895 Yocto Project release you are using. 889 along with the Yocto Project release you are
896 Here is an example that uses the <filename>&DISTRO_NAME;</filename> branch: 890 using.
891 Here is an example that uses the
892 <filename>&DISTRO_NAME;</filename> branch:
897 <literallayout class='monospaced'> 893 <literallayout class='monospaced'>
898 $ ECLIPSE_HOME=/home/scottrif/yocto-eclipse/scripts/eclipse ./build.sh &DISTRO_NAME; &DISTRO_NAME; 894 $ ECLIPSE_HOME=/home/scottrif/yocto-eclipse/scripts/eclipse ./build.sh &DISTRO_NAME; &DISTRO_NAME;
899 </literallayout> 895 </literallayout>
900 After running the script, the file 896 After running the script, the file
901 <filename>org.yocto.sdk-&lt;release&gt;-&lt;date&gt;-archive.zip</filename> 897 <filename>org.yocto.sdk-&lt;release&gt;-&lt;date&gt;-archive.zip</filename>
902 is in the current directory.</para></listitem> 898 is in the current directory.</para></listitem>
903 <listitem><para>If necessary, start the Eclipse IDE and be sure you are in the 899 <listitem><para>If necessary, start the Eclipse IDE
904 Workbench.</para></listitem> 900 and be sure you are in the Workbench.
901 </para></listitem>
905 <listitem><para>Select "Install New Software" from the "Help" pull-down menu. 902 <listitem><para>Select "Install New Software" from the "Help" pull-down menu.
906 </para></listitem> 903 </para></listitem>
907 <listitem><para>Click "Add".</para></listitem> 904 <listitem><para>Click "Add".</para></listitem>
908 <listitem><para>Provide anything you want in the "Name" field.</para></listitem> 905 <listitem><para>Provide anything you want in the
909 <listitem><para>Click "Archive" and browse to the ZIP file you built 906 "Name" field.</para></listitem>
910 in step seven. 907 <listitem><para>Click "Archive" and browse to the
911 This ZIP file should not be "unzipped", and must be the 908 ZIP file you built in step seven.
912 <filename>*archive.zip</filename> file created by running the 909 This ZIP file should not be "unzipped", and must
913 <filename>build.sh</filename> script.</para></listitem> 910 be the <filename>*archive.zip</filename> file
914 <listitem><para>Click through the "Okay" buttons.</para></listitem> 911 created by running the
915 <listitem><para>Check the box next to the new entry in the installation window and complete 912 <filename>build.sh</filename> script.
916 the installation.</para></listitem> 913 </para></listitem>
917 <listitem><para>Restart the Eclipse IDE if necessary.</para></listitem> 914 <listitem><para>Click through the "Okay" buttons.
915 </para></listitem>
916 <listitem><para>Check the box next to the new entry
917 in the installation window and complete
918 the installation.</para></listitem>
919 <listitem><para>Restart the Eclipse IDE if
920 necessary.</para></listitem>
918 </orderedlist> 921 </orderedlist>
919 </para> 922 </para>
920 923
921 <para> 924 <para>
922 At this point you should be able to configure the Eclipse Yocto Plug-in as described in the 925 At this point you should be able to configure the
926 Eclipse Yocto Plug-in as described in the
923 "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>" 927 "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>"
924 section.</para> 928 section.</para>
925 </section> 929 </section>
@@ -928,29 +932,37 @@
928 <title>Importing the Plug-in Project into the Eclipse Environment</title> 932 <title>Importing the Plug-in Project into the Eclipse Environment</title>
929 933
930 <para> 934 <para>
931 Importing the Eclipse Yocto Plug-in project from the Yocto Project source repositories 935 Importing the Eclipse Yocto Plug-in project from the
932 is useful when you want to try out the latest plug-in from the tip of plug-in's 936 Yocto Project source repositories is useful when you
933 development tree. 937 want to try out the latest plug-in from the tip of
934 It is important to understand when you import the plug-in you are not installing 938 plug-in's development tree.
935 it into the Eclipse application. 939 It is important to understand when you import the
940 plug-in you are not installing it into the Eclipse
941 application.
936 Rather, you are importing the project and just using it. 942 Rather, you are importing the project and just using it.
937 </para> 943 </para>
938 944
939 <para> 945 <para>
940 To import the plug-in project, follow these steps: 946 To import the plug-in project, follow these steps:
941 <orderedlist> 947 <orderedlist>
942 <listitem><para>Open a shell and create a Git repository with: 948 <listitem><para>Open a shell and create a Git
949 repository with:
943 <literallayout class='monospaced'> 950 <literallayout class='monospaced'>
944 $ git clone git://git.yoctoproject.org/eclipse-poky yocto-eclipse 951 $ git clone git://git.yoctoproject.org/eclipse-poky yocto-eclipse
945 </literallayout> 952 </literallayout>
946 For this example, the repository is named 953 For this example, the repository is named
947 <filename>~/yocto-eclipse</filename>.</para></listitem> 954 <filename>~/yocto-eclipse</filename>.
948 <listitem><para>In Eclipse, select "Import" from the "File" menu.</para></listitem> 955 </para></listitem>
949 <listitem><para>Expand the "General" box and select "existing projects into workspace" 956 <listitem><para>In Eclipse, select "Import" from
950 and then click "Next".</para></listitem> 957 the "File" menu.</para></listitem>
951 <listitem><para>Select the root directory and browse to 958 <listitem><para>Expand the "General" box and select
952 <filename>~/yocto-eclipse/plugins</filename>.</para></listitem> 959 "existing projects into workspace" and then
953 <listitem><para>Three plug-ins exist: 960 click "Next".</para></listitem>
961 <listitem><para>Select the root directory and
962 browse to
963 <filename>~/yocto-eclipse/plugins</filename>.
964 </para></listitem>
965 <listitem><para>Three plug-ins exist:
954 <filename>org.yocto.bc.ui</filename>, 966 <filename>org.yocto.bc.ui</filename>,
955 <filename>org.yocto.sdk.ide</filename>, and 967 <filename>org.yocto.sdk.ide</filename>, and
956 <filename>org.yocto.sdk.remotetools</filename>. 968 <filename>org.yocto.sdk.remotetools</filename>.
@@ -959,9 +971,11 @@
959 </para> 971 </para>
960 972
961 <para> 973 <para>
962 The left navigation pane in the Eclipse application shows the default projects. 974 The left navigation pane in the Eclipse application
963 Right-click on one of these projects and run it as an Eclipse application 975 shows the default projects.
964 to bring up a second instance of Eclipse IDE that has the Yocto Plug-in. 976 Right-click on one of these projects and run it as an
977 Eclipse application to bring up a second instance of
978 Eclipse IDE that has the Yocto Plug-in.
965 </para> 979 </para>
966 </section> 980 </section>
967 </section> 981 </section>
@@ -970,20 +984,23 @@
970 <title>Configuring the Eclipse Yocto Plug-in</title> 984 <title>Configuring the Eclipse Yocto Plug-in</title>
971 985
972 <para> 986 <para>
973 Configuring the Eclipse Yocto Plug-in involves setting the Cross 987 Configuring the Eclipse Yocto Plug-in involves setting the
974 Compiler options and the Target options. 988 Cross Compiler options and the Target options.
975 The configurations you choose become the default settings for all projects. 989 The configurations you choose become the default settings
990 for all projects.
976 You do have opportunities to change them later when 991 You do have opportunities to change them later when
977 you configure the project (see the following section). 992 you configure the project (see the following section).
978 </para> 993 </para>
979 994
980 <para> 995 <para>
981 To start, you need to do the following from within the Eclipse IDE: 996 To start, you need to do the following from within the
997 Eclipse IDE:
982 <itemizedlist> 998 <itemizedlist>
983 <listitem><para>Choose "Preferences" from the 999 <listitem><para>Choose "Preferences" from the
984 "Windows" menu to display 1000 "Windows" menu to display the Preferences Dialog.
985 the Preferences Dialog</para></listitem> 1001 </para></listitem>
986 <listitem><para>Click "Yocto Project ADT"</para></listitem> 1002 <listitem><para>Click "Yocto Project ADT".
1003 </para></listitem>
987 </itemizedlist> 1004 </itemizedlist>
988 </para> 1005 </para>
989 1006
@@ -991,78 +1008,105 @@
991 <title>Configuring the Cross-Compiler Options</title> 1008 <title>Configuring the Cross-Compiler Options</title>
992 1009
993 <para> 1010 <para>
994 To configure the Cross Compiler Options, you must select the type of toolchain, 1011 To configure the Cross Compiler Options, you must select
995 point to the toolchain, specify the sysroot location, and select the target architecture. 1012 the type of toolchain, point to the toolchain, specify
1013 the sysroot location, and select the target
1014 architecture.
996 <itemizedlist> 1015 <itemizedlist>
997 <listitem><para><emphasis>Selecting the Toolchain Type:</emphasis> 1016 <listitem><para><emphasis>Selecting the Toolchain Type:</emphasis>
998 Choose between <filename>Standalone pre-built toolchain</filename> 1017 Choose between
999 and <filename>Build system derived toolchain</filename> for Cross 1018 <filename>Standalone pre-built toolchain</filename>
1000 Compiler Options. 1019 and
1020 <filename>Build system derived toolchain</filename>
1021 for Cross Compiler Options.
1001 <itemizedlist> 1022 <itemizedlist>
1002 <listitem><para><emphasis> 1023 <listitem><para><emphasis>
1003 <filename>Standalone Pre-built Toolchain:</filename></emphasis> 1024 <filename>Standalone Pre-built Toolchain:</filename></emphasis>
1004 Select this mode when you are using a stand-alone cross-toolchain. 1025 Select this mode when you are using
1005 For example, suppose you are an application developer and do not 1026 a stand-alone cross-toolchain.
1027 For example, suppose you are an
1028 application developer and do not
1006 need to build a target image. 1029 need to build a target image.
1007 Instead, you just want to use an architecture-specific toolchain on an 1030 Instead, you just want to use an
1008 existing kernel and target root filesystem. 1031 architecture-specific toolchain on
1009 </para></listitem> 1032 an existing kernel and target root
1033 filesystem.</para></listitem>
1010 <listitem><para><emphasis> 1034 <listitem><para><emphasis>
1011 <filename>Build System Derived Toolchain:</filename></emphasis> 1035 <filename>Build System Derived Toolchain:</filename></emphasis>
1012 Select this mode if the cross-toolchain has been installed and built 1036 Select this mode if the
1013 as part of the 1037 cross-toolchain has been installed
1038 and built as part of the
1014 <link linkend='build-directory'>Build Directory</link>. 1039 <link linkend='build-directory'>Build Directory</link>.
1015 When you select <filename>Build system derived toolchain</filename>, 1040 When you select
1041 <filename>Build system derived toolchain</filename>,
1016 you are using the toolchain bundled 1042 you are using the toolchain bundled
1017 inside the Build Directory. 1043 inside the Build Directory.
1018 </para></listitem> 1044 </para></listitem>
1019 </itemizedlist> 1045 </itemizedlist>
1020 </para></listitem> 1046 </para></listitem>
1021 <listitem><para><emphasis>Point to the Toolchain:</emphasis> 1047 <listitem><para><emphasis>Point to the Toolchain:</emphasis>
1022 If you are using a stand-alone pre-built toolchain, you should be pointing to the 1048 If you are using a stand-alone pre-built
1023 where it is installed. 1049 toolchain, you should be pointing to where it is
1024 If you used the ADT Installer script and accepted the default 1050 installed.
1025 installation directory, the toolchain will be installed in 1051 If you used the ADT Installer script and
1026 the <filename>&YOCTO_ADTPATH_DIR;</filename> directory. 1052 accepted the default installation directory, the
1027 Sections "<ulink url='&YOCTO_DOCS_ADT_URL;#configuring-and-running-the-adt-installer-script'>Configuring 1053 toolchain will be installed in the
1028 and Running the ADT Installer Script</ulink>" and 1054 <filename>&YOCTO_ADTPATH_DIR;</filename>
1055 directory.
1056 Sections "<ulink url='&YOCTO_DOCS_ADT_URL;#configuring-and-running-the-adt-installer-script'>Configuring and Running the ADT Installer Script</ulink>"
1057 and
1029 "<ulink url='&YOCTO_DOCS_ADT_URL;#using-an-existing-toolchain-tarball'>Using a Cross-Toolchain Tarball</ulink>" 1058 "<ulink url='&YOCTO_DOCS_ADT_URL;#using-an-existing-toolchain-tarball'>Using a Cross-Toolchain Tarball</ulink>"
1030 in the Yocto Project Application Developer's Guide 1059 in the Yocto Project Application Developer's
1031 describe how to install a stand-alone cross-toolchain.</para> 1060 Guide describe how to install a stand-alone
1032 <para>If you are using a system-derived toolchain, the path you provide 1061 cross-toolchain.</para>
1033 for the <filename>Toolchain Root Location</filename> 1062 <para>If you are using a system-derived
1034 field is the <link linkend='build-directory'>Build Directory</link>. 1063 toolchain, the path you provide for the
1035 See the "<ulink url='&YOCTO_DOCS_ADT_URL;#using-the-toolchain-from-within-the-build-tree'>Using 1064 <filename>Toolchain Root Location</filename>
1036 BitBake and the Build Directory</ulink>" section in the Yocto Project Application 1065 field is the
1037 Developer's Guide for information on how to install 1066 <link linkend='build-directory'>Build Directory</link>.
1038 the toolchain into the Build Directory.</para></listitem> 1067 See the
1068 "<ulink url='&YOCTO_DOCS_ADT_URL;#using-the-toolchain-from-within-the-build-tree'>Using BitBake and the Build Directory</ulink>"
1069 section in the Yocto Project Application
1070 Developer's Guide for information on how to
1071 install the toolchain into the Build
1072 Directory.</para></listitem>
1039 <listitem><para><emphasis>Specify the Sysroot Location:</emphasis> 1073 <listitem><para><emphasis>Specify the Sysroot Location:</emphasis>
1040 This location is where the root filesystem for the target hardware resides. 1074 This location is where the root filesystem for
1041 If you used the ADT Installer script and accepted the 1075 the target hardware resides.
1042 default installation directory, then the location is 1076 If you used the ADT Installer script and
1077 accepted the default installation directory,
1078 then the location is
1043 <filename>/opt/poky/&lt;release&gt;</filename>. 1079 <filename>/opt/poky/&lt;release&gt;</filename>.
1044 Additionally, when you use the ADT Installer script, 1080 Additionally, when you use the ADT Installer
1045 the same location is used for 1081 script, the same location is used for the QEMU
1046 the QEMU user-space tools and the NFS boot process.</para> 1082 user-space tools and the NFS boot process.
1047 <para>If you used either of the other two methods to 1083 </para>
1048 install the toolchain or did not accept the ADT Installer 1084 <para>If you used either of the other two
1049 script's default installation directory, then the 1085 methods to install the toolchain or did not
1050 location of the sysroot filesystem depends on where you separately 1086 accept the ADT Installer script's default
1051 extracted and installed the filesystem.</para> 1087 installation directory, then the location of
1052 <para>For information on how to install the toolchain and on how to extract 1088 the sysroot filesystem depends on where you
1053 and install the sysroot filesystem, see the 1089 separately extracted and installed the
1090 filesystem.</para>
1091 <para>For information on how to install the
1092 toolchain and on how to extract and install the
1093 sysroot filesystem, see the
1054 "<ulink url='&YOCTO_DOCS_ADT_URL;#installing-the-adt'>Installing the ADT and Toolchains</ulink>" section. 1094 "<ulink url='&YOCTO_DOCS_ADT_URL;#installing-the-adt'>Installing the ADT and Toolchains</ulink>" section.
1055 </para></listitem> 1095 </para></listitem>
1056 <listitem><para><emphasis>Select the Target Architecture:</emphasis> 1096 <listitem><para><emphasis>Select the Target Architecture:</emphasis>
1057 The target architecture is the type of hardware you are 1097 The target architecture is the type of hardware
1058 going to use or emulate. 1098 you are going to use or emulate.
1059 Use the pull-down <filename>Target Architecture</filename> menu to make 1099 Use the pull-down
1060 your selection. 1100 <filename>Target Architecture</filename> menu
1061 The pull-down menu should have the supported architectures. 1101 to make your selection.
1062 If the architecture you need is not listed in the menu, you 1102 The pull-down menu should have the supported
1063 will need to build the image. 1103 architectures.
1064 See the "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>" section 1104 If the architecture you need is not listed in
1065 of the Yocto Project Quick Start for more information.</para></listitem> 1105 the menu, you will need to build the image.
1106 See the
1107 "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>"
1108 section of the Yocto Project Quick Start for
1109 more information.</para></listitem>
1066 </itemizedlist> 1110 </itemizedlist>
1067 </para> 1111 </para>
1068 </section> 1112 </section>
@@ -1071,38 +1115,53 @@
1071 <title>Configuring the Target Options</title> 1115 <title>Configuring the Target Options</title>
1072 1116
1073 <para> 1117 <para>
1074 You can choose to emulate hardware using the QEMU emulator, or you 1118 You can choose to emulate hardware using the QEMU
1075 can choose to run your image on actual hardware. 1119 emulator, or you can choose to run your image on actual
1120 hardware.
1076 <itemizedlist> 1121 <itemizedlist>
1077 <listitem><para><emphasis><filename>QEMU:</filename></emphasis> Select this option if 1122 <listitem><para><emphasis><filename>QEMU:</filename></emphasis>
1078 you will be using the QEMU emulator. 1123 Select this option if you will be using the
1079 If you are using the emulator, you also need to locate the kernel 1124 QEMU emulator.
1080 and specify any custom options.</para> 1125 If you are using the emulator, you also need to
1081 <para>If you selected <filename>Build system derived toolchain</filename>, 1126 locate the kernel and specify any custom
1082 the target kernel you built will be located in the 1127 options.</para>
1083 Build Directory in <filename>tmp/deploy/images</filename> directory. 1128 <para>If you selected
1084 If you selected <filename>Standalone pre-built toolchain</filename>, the 1129 <filename>Build system derived toolchain</filename>,
1085 pre-built image you downloaded is located 1130 the target kernel you built will be located in
1086 in the directory you specified when you downloaded the image.</para> 1131 the Build Directory in
1087 <para>Most custom options are for advanced QEMU users to further 1132 <filename>tmp/deploy/images</filename>
1088 customize their QEMU instance. 1133 directory.
1089 These options are specified between paired angled brackets. 1134 If you selected
1090 Some options must be specified outside the brackets. 1135 <filename>Standalone pre-built toolchain</filename>,
1091 In particular, the options <filename>serial</filename>, 1136 the pre-built image you downloaded is located
1092 <filename>nographic</filename>, and <filename>kvm</filename> must all 1137 in the directory you specified when you
1093 be outside the brackets. 1138 downloaded the image.</para>
1094 Use the <filename>man qemu</filename> command to get help on all the options 1139 <para>Most custom options are for advanced QEMU
1095 and their use. 1140 users to further customize their QEMU instance.
1141 These options are specified between paired
1142 angled brackets.
1143 Some options must be specified outside the
1144 brackets.
1145 In particular, the options
1146 <filename>serial</filename>,
1147 <filename>nographic</filename>, and
1148 <filename>kvm</filename> must all be outside the
1149 brackets.
1150 Use the <filename>man qemu</filename> command
1151 to get help on all the options and their use.
1096 The following is an example: 1152 The following is an example:
1097 <literallayout class='monospaced'> 1153 <literallayout class='monospaced'>
1098 serial ‘&lt;-m 256 -full-screen&gt;’ 1154 serial ‘&lt;-m 256 -full-screen&gt;’
1099 </literallayout></para> 1155 </literallayout></para>
1100 <para> 1156 <para>
1101 Regardless of the mode, Sysroot is already defined as part of the 1157 Regardless of the mode, Sysroot is already
1102 Cross-Compiler Options configuration in the 1158 defined as part of the Cross-Compiler Options
1103 <filename>Sysroot Location:</filename> field.</para></listitem> 1159 configuration in the
1104 <listitem><para><emphasis><filename>External HW:</filename></emphasis> Select this option 1160 <filename>Sysroot Location:</filename> field.
1105 if you will be using actual hardware.</para></listitem> 1161 </para></listitem>
1162 <listitem><para><emphasis><filename>External HW:</filename></emphasis>
1163 Select this option if you will be using actual
1164 hardware.</para></listitem>
1106 </itemizedlist> 1165 </itemizedlist>
1107 </para> 1166 </para>
1108 1167
@@ -1117,36 +1176,50 @@
1117 <title>Creating the Project</title> 1176 <title>Creating the Project</title>
1118 1177
1119 <para> 1178 <para>
1120 You can create two types of projects: Autotools-based, or Makefile-based. 1179 You can create two types of projects: Autotools-based, or
1121 This section describes how to create Autotools-based projects from within 1180 Makefile-based.
1122 the Eclipse IDE. 1181 This section describes how to create Autotools-based projects
1123 For information on creating Makefile-based projects in a terminal window, see the section 1182 from within the Eclipse IDE.
1183 For information on creating Makefile-based projects in a
1184 terminal window, see the section
1124 "<ulink url='&YOCTO_DOCS_ADT_URL;#using-the-command-line'>Using the Command Line</ulink>" 1185 "<ulink url='&YOCTO_DOCS_ADT_URL;#using-the-command-line'>Using the Command Line</ulink>"
1125 in the Yocto Project Application Developer's Guide. 1186 in the Yocto Project Application Developer's Guide.
1126 </para> 1187 </para>
1127 1188
1128 <para> 1189 <para>
1129 To create a project based on a Yocto template and then display the source code, 1190 To create a project based on a Yocto template and then display
1130 follow these steps: 1191 the source code, follow these steps:
1131 <orderedlist> 1192 <orderedlist>
1132 <listitem><para>Select "Project" from the "File -> New" menu.</para></listitem> 1193 <listitem><para>Select "Project" from the "File -> New" menu.
1133 <listitem><para>Double click <filename>CC++</filename>.</para></listitem> 1194 </para></listitem>
1134 <listitem><para>Double click <filename>C Project</filename> to create the project.</para></listitem> 1195 <listitem><para>Double click <filename>CC++</filename>.
1135 <listitem><para>Expand <filename>Yocto Project ADT Project</filename>.</para></listitem> 1196 </para></listitem>
1197 <listitem><para>Double click <filename>C Project</filename>
1198 to create the project.</para></listitem>
1199 <listitem><para>Expand <filename>Yocto Project ADT Project</filename>.
1200 </para></listitem>
1136 <listitem><para>Select <filename>Hello World ANSI C Autotools Project</filename>. 1201 <listitem><para>Select <filename>Hello World ANSI C Autotools Project</filename>.
1137 This is an Autotools-based project based on a Yocto template.</para></listitem> 1202 This is an Autotools-based project based on a Yocto
1138 <listitem><para>Put a name in the <filename>Project name:</filename> field. 1203 template.</para></listitem>
1139 Do not use hyphens as part of the name.</para></listitem> 1204 <listitem><para>Put a name in the <filename>Project name:</filename>
1205 field.
1206 Do not use hyphens as part of the name.
1207 </para></listitem>
1140 <listitem><para>Click "Next".</para></listitem> 1208 <listitem><para>Click "Next".</para></listitem>
1141 <listitem><para>Add information in the <filename>Author</filename> and 1209 <listitem><para>Add information in the
1142 <filename>Copyright notice</filename> fields.</para></listitem> 1210 <filename>Author</filename> and
1143 <listitem><para>Be sure the <filename>License</filename> field is correct.</para></listitem> 1211 <filename>Copyright notice</filename> fields.
1212 </para></listitem>
1213 <listitem><para>Be sure the <filename>License</filename>
1214 field is correct.</para></listitem>
1144 <listitem><para>Click "Finish".</para></listitem> 1215 <listitem><para>Click "Finish".</para></listitem>
1145 <listitem><para>If the "open perspective" prompt appears, click "Yes" so that you 1216 <listitem><para>If the "open perspective" prompt appears,
1146 in the C/C++ perspective.</para></listitem> 1217 click "Yes" so that you in the C/C++ perspective.
1147 <listitem><para>The left-hand navigation pane shows your project.
1148 You can display your source by double clicking the project's source file.
1149 </para></listitem> 1218 </para></listitem>
1219 <listitem><para>The left-hand navigation pane shows your
1220 project.
1221 You can display your source by double clicking the
1222 project's source file.</para></listitem>
1150 </orderedlist> 1223 </orderedlist>
1151 </para> 1224 </para>
1152 </section> 1225 </section>
@@ -1155,38 +1228,47 @@
1155 <title>Configuring the Cross-Toolchains</title> 1228 <title>Configuring the Cross-Toolchains</title>
1156 1229
1157 <para> 1230 <para>
1158 The earlier section, "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring 1231 The earlier section,
1159 the Eclipse Yocto Plug-in</link>", sets up the default project 1232 "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>",
1160 configurations. 1233 sets up the default project configurations.
1161 You can override these settings for a given project by following these steps: 1234 You can override these settings for a given project by following
1235 these steps:
1162 <orderedlist> 1236 <orderedlist>
1163 <listitem><para>Select "Change Yocto Project Settings" from the 1237 <listitem><para>Select "Change Yocto Project Settings" from
1164 "Project" menu. 1238 the "Project" menu.
1165 This selection brings up the Yocto Project Settings Dialog 1239 This selection brings up the Yocto Project Settings
1166 and allows you to make changes specific to an individual project. 1240 Dialog and allows you to make changes specific to an
1167 </para> 1241 individual project.</para>
1168 <para>By default, the Cross Compiler Options and Target Options for a project 1242 <para>By default, the Cross Compiler Options and Target
1169 are inherited from settings you provide using the Preferences 1243 Options for a project are inherited from settings you
1170 Dialog as described earlier 1244 provide using the Preferences Dialog as described
1171 in the "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse 1245 earlier in the
1172 Yocto Plug-in</link>" section. 1246 "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>" section.
1173 The Yocto Project Settings Dialog allows you to override 1247 The Yocto Project Settings Dialog allows you to override
1174 those default settings for a given project.</para></listitem> 1248 those default settings for a given project.
1175 <listitem><para>Make your configurations for the project and click "OK". 1249 </para></listitem>
1176 If you are running the Juno version of Eclipse, you can skip down to the next 1250 <listitem><para>Make your configurations for the project
1177 section where you build the project. 1251 and click "OK".
1178 If you are not working with Juno, you need to reconfigure the project as 1252 If you are running the Juno version of Eclipse, you can
1179 described in the next step.</para></listitem> 1253 skip down to the next section where you build the
1180 <listitem><para>Select "Reconfigure Project" from the 1254 project.
1255 If you are not working with Juno, you need to reconfigure the
1256 project as described in the next step.
1257 </para></listitem>
1258 <listitem><para>Select "Reconfigure Project" from the
1181 "Project" menu. 1259 "Project" menu.
1182 This selection reconfigures the project by running 1260 This selection reconfigures the project by running
1183 <filename>autogen.sh</filename> in the workspace for your project. 1261 <filename>autogen.sh</filename> in the workspace for
1184 The script also runs <filename>libtoolize</filename>, <filename>aclocal</filename>, 1262 your project.
1185 <filename>autoconf</filename>, <filename>autoheader</filename>, 1263 The script also runs <filename>libtoolize</filename>,
1264 <filename>aclocal</filename>,
1265 <filename>autoconf</filename>,
1266 <filename>autoheader</filename>,
1186 <filename>automake --a</filename>, and 1267 <filename>automake --a</filename>, and
1187 <filename>./configure</filename>. 1268 <filename>./configure</filename>.
1188 Click on the "Console" tab beneath your source code to 1269 Click on the "Console" tab beneath your source code to
1189 see the results of reconfiguring your project.</para></listitem> 1270 see the results of reconfiguring your project.
1271 </para></listitem>
1190 </orderedlist> 1272 </orderedlist>
1191 </para> 1273 </para>
1192 </section> 1274 </section>
@@ -1195,11 +1277,12 @@
1195 <title>Building the Project</title> 1277 <title>Building the Project</title>
1196 1278
1197 <para> 1279 <para>
1198 To build the project in Juno, right click on the project in the navigator pane and select 1280 To build the project in Juno, right click on the project in
1199 "Build Project". 1281 the navigator pane and select "Build Project".
1200 If you are not running Juno, select "Build Project" from the 1282 If you are not running Juno, select "Build Project" from the
1201 "Project" menu. 1283 "Project" menu.
1202 The console should update and you can note the cross-compiler you are using. 1284 The console should update and you can note the cross-compiler
1285 you are using.
1203 </para> 1286 </para>
1204 </section> 1287 </section>
1205 1288
@@ -1207,23 +1290,26 @@
1207 <title>Starting QEMU in User-Space NFS Mode</title> 1290 <title>Starting QEMU in User-Space NFS Mode</title>
1208 1291
1209 <para> 1292 <para>
1210 To start the QEMU emulator from within Eclipse, follow these steps: 1293 To start the QEMU emulator from within Eclipse, follow these
1294 steps:
1211 <orderedlist> 1295 <orderedlist>
1212 <listitem><para>Expose and select "External Tools" from 1296 <listitem><para>Expose and select "External Tools" from
1213 the "Run" menu. 1297 the "Run" menu.
1214 Your image should appear as a selectable menu item. 1298 Your image should appear as a selectable menu item.
1215 </para></listitem> 1299 </para></listitem>
1216 <listitem><para>Select your image from the menu to launch the 1300 <listitem><para>Select your image from the menu to launch
1217 emulator in a new window.</para></listitem> 1301 the emulator in a new window.</para></listitem>
1218 <listitem><para>If needed, enter your host root password in the shell window at the prompt. 1302 <listitem><para>If needed, enter your host root password in
1219 This sets up a <filename>Tap 0</filename> connection needed for running in user-space 1303 the shell window at the prompt.
1220 NFS mode.</para></listitem> 1304 This sets up a <filename>Tap 0</filename> connection
1305 needed for running in user-space NFS mode.
1306 </para></listitem>
1221 <listitem><para>Wait for QEMU to launch.</para></listitem> 1307 <listitem><para>Wait for QEMU to launch.</para></listitem>
1222 <listitem><para>Once QEMU launches, you can begin operating within that 1308 <listitem><para>Once QEMU launches, you can begin operating
1223 environment. 1309 within that environment.
1224 For example, you could determine the IP Address 1310 For example, you could determine the IP Address
1225 for the user-space NFS by using the <filename>ifconfig</filename> command. 1311 for the user-space NFS by using the
1226 </para></listitem> 1312 <filename>ifconfig</filename> command.</para></listitem>
1227 </orderedlist> 1313 </orderedlist>
1228 </para> 1314 </para>
1229 </section> 1315 </section>
@@ -1232,38 +1318,45 @@
1232 <title>Deploying and Debugging the Application</title> 1318 <title>Deploying and Debugging the Application</title>
1233 1319
1234 <para> 1320 <para>
1235 Once the QEMU emulator is running the image, you can deploy 1321 Once the QEMU emulator is running the image, you can deploy
1236 your application using the Eclipse IDE and use then use 1322 your application using the Eclipse IDE and use then use
1237 the emulator to perform debugging. 1323 the emulator to perform debugging.
1238 Follow these steps to deploy the application. 1324 Follow these steps to deploy the application.
1239 <orderedlist> 1325 <orderedlist>
1240 <listitem><para>Select "Debug Configurations..." from the 1326 <listitem><para>Select "Debug Configurations..." from the
1241 "Run" menu.</para></listitem> 1327 "Run" menu.</para></listitem>
1242 <listitem><para>In the left area, expand <filename>C/C++Remote Application</filename>.</para></listitem> 1328 <listitem><para>In the left area, expand
1243 <listitem><para>Locate your project and select it to bring up a new 1329 <filename>C/C++Remote Application</filename>.
1244 tabbed view in the Debug Configurations Dialog.</para></listitem> 1330 </para></listitem>
1245 <listitem><para>Enter the absolute path into which you want to deploy 1331 <listitem><para>Locate your project and select it to bring
1246 the application. 1332 up a new tabbed view in the Debug Configurations Dialog.
1247 Use the "Remote Absolute File Path for C/C++Application:" field. 1333 </para></listitem>
1248 For example, enter <filename>/usr/bin/&lt;programname&gt;</filename>.</para></listitem> 1334 <listitem><para>Enter the absolute path into which you want
1249 <listitem><para>Click on the "Debugger" tab to see the cross-tool debugger 1335 to deploy the application.
1250 you are using.</para></listitem> 1336 Use the "Remote Absolute File Path for
1337 C/C++Application:" field.
1338 For example, enter
1339 <filename>/usr/bin/&lt;programname&gt;</filename>.
1340 </para></listitem>
1341 <listitem><para>Click on the "Debugger" tab to see the
1342 cross-tool debugger you are using.</para></listitem>
1251 <listitem><para>Click on the "Main" tab.</para></listitem> 1343 <listitem><para>Click on the "Main" tab.</para></listitem>
1252 <listitem><para>Create a new connection to the QEMU instance 1344 <listitem><para>Create a new connection to the QEMU instance
1253 by clicking on "new".</para></listitem> 1345 by clicking on "new".</para></listitem>
1254 <listitem><para>Select <filename>TCF</filename>, which means Target Communication 1346 <listitem><para>Select <filename>TCF</filename>, which means
1255 Framework.</para></listitem> 1347 Target Communication Framework.</para></listitem>
1256 <listitem><para>Click "Next".</para></listitem> 1348 <listitem><para>Click "Next".</para></listitem>
1257 <listitem><para>Clear out the "host name" field and enter the IP Address 1349 <listitem><para>Clear out the "host name" field and enter
1258 determined earlier.</para></listitem> 1350 the IP Address determined earlier.</para></listitem>
1259 <listitem><para>Click "Finish" to close the 1351 <listitem><para>Click "Finish" to close the
1260 New Connections Dialog.</para></listitem> 1352 New Connections Dialog.</para></listitem>
1261 <listitem><para>Use the drop-down menu now in the 1353 <listitem><para>Use the drop-down menu now in the
1262 "Connection" field and pick the IP Address you entered. 1354 "Connection" field and pick the IP Address you entered.
1263 </para></listitem> 1355 </para></listitem>
1264 <listitem><para>Click "Run" to bring up a login screen 1356 <listitem><para>Click "Run" to bring up a login screen
1265 and login.</para></listitem> 1357 and login.</para></listitem>
1266 <listitem><para>Accept the debug perspective.</para></listitem> 1358 <listitem><para>Accept the debug perspective.
1359 </para></listitem>
1267 </orderedlist> 1360 </orderedlist>
1268 </para> 1361 </para>
1269 </section> 1362 </section>
@@ -1272,107 +1365,135 @@
1272 <title>Running User-Space Tools</title> 1365 <title>Running User-Space Tools</title>
1273 1366
1274 <para> 1367 <para>
1275 As mentioned earlier in the manual, several tools exist that enhance 1368 As mentioned earlier in the manual, several tools exist that
1276 your development experience. 1369 enhance your development experience.
1277 These tools are aids in developing and debugging applications and images. 1370 These tools are aids in developing and debugging applications
1278 You can run these user-space tools from within the Eclipse IDE through the 1371 and images.
1279 "YoctoTools" menu. 1372 You can run these user-space tools from within the Eclipse
1373 IDE through the "YoctoTools" menu.
1280 </para> 1374 </para>
1281 1375
1282 <para> 1376 <para>
1283 Once you pick a tool, you need to configure it for the remote target. 1377 Once you pick a tool, you need to configure it for the remote
1378 target.
1284 Every tool needs to have the connection configured. 1379 Every tool needs to have the connection configured.
1285 You must select an existing TCF-based RSE connection to the remote target. 1380 You must select an existing TCF-based RSE connection to the
1381 remote target.
1286 If one does not exist, click "New" to create one. 1382 If one does not exist, click "New" to create one.
1287 </para> 1383 </para>
1288 1384
1289 <para> 1385 <para>
1290 Here are some specifics about the remote tools: 1386 Here are some specifics about the remote tools:
1291 <itemizedlist> 1387 <itemizedlist>
1292 <listitem><para><emphasis><filename>OProfile</filename>:</emphasis> Selecting this tool causes 1388 <listitem><para><emphasis><filename>OProfile</filename>:</emphasis>
1293 the <filename>oprofile-server</filename> on the remote target to launch on 1389 Selecting this tool causes the
1294 the local host machine. 1390 <filename>oprofile-server</filename> on the remote
1295 The <filename>oprofile-viewer</filename> must be installed on the local host machine and the 1391 target to launch on the local host machine.
1296 <filename>oprofile-server</filename> must be installed on the remote target, 1392 The <filename>oprofile-viewer</filename> must be
1297 respectively, in order to use. 1393 installed on the local host machine and the
1298 You must compile and install the <filename>oprofile-viewer</filename> from the source code 1394 <filename>oprofile-server</filename> must be installed
1299 on your local host machine. 1395 on the remote target, respectively, in order to use.
1300 Furthermore, in order to convert the target's sample format data into a form that the 1396 You must compile and install the
1301 host can use, you must have OProfile version 0.9.4 or 1397 <filename>oprofile-viewer</filename> from the source
1302 greater installed on the host.</para> 1398 code on your local host machine.
1399 Furthermore, in order to convert the target's sample
1400 format data into a form that the host can use, you must
1401 have OProfile version 0.9.4 or greater installed on the
1402 host.</para>
1303 <para>You can locate both the viewer and server from 1403 <para>You can locate both the viewer and server from
1304 <ulink url='&YOCTO_GIT_URL;/cgit/cgit.cgi/oprofileui/'></ulink>. 1404 <ulink url='&YOCTO_GIT_URL;/cgit/cgit.cgi/oprofileui/'></ulink>.
1305 You can also find more information on setting up and 1405 You can also find more information on setting up and
1306 using this tool in the 1406 using this tool in the
1307 "<ulink url='&YOCTO_DOCS_PROF_URL;#profile-manual-oprofile'>OProfile</ulink>" 1407 "<ulink url='&YOCTO_DOCS_PROF_URL;#profile-manual-oprofile'>OProfile</ulink>"
1308 section of the Yocto Project Profiling and Tracing Manual. 1408 section of the Yocto Project Profiling and Tracing
1309 <note>The <filename>oprofile-server</filename> is installed by default on 1409 Manual.
1310 the <filename>core-image-sato-sdk</filename> image.</note></para></listitem> 1410 <note>The <filename>oprofile-server</filename> is
1411 installed by default on the
1412 <filename>core-image-sato-sdk</filename> image.</note>
1413 </para></listitem>
1311 <listitem><para><emphasis><filename>Lttng2.0 ust trace import</filename>:</emphasis> 1414 <listitem><para><emphasis><filename>Lttng2.0 ust trace import</filename>:</emphasis>
1312 Selecting this tool transfers the remote target's 1415 Selecting this tool transfers the remote target's
1313 <filename>Lttng</filename> tracing data back to the local host machine 1416 <filename>Lttng</filename> tracing data back to the
1314 and uses the Lttng Eclipse plug-in to graphically 1417 local host machine and uses the Lttng Eclipse plug-in
1315 display the output. 1418 to graphically display the output.
1316 For information on how to use Lttng to trace an application, 1419 For information on how to use Lttng to trace an
1420 application,
1317 see <ulink url='http://lttng.org/documentation'></ulink> 1421 see <ulink url='http://lttng.org/documentation'></ulink>
1318 and the 1422 and the
1319 "<ulink url='&YOCTO_DOCS_PROF_URL;#lttng-linux-trace-toolkit-next-generation'>LTTng (Linux Trace Toolkit, next generation)</ulink>" 1423 "<ulink url='&YOCTO_DOCS_PROF_URL;#lttng-linux-trace-toolkit-next-generation'>LTTng (Linux Trace Toolkit, next generation)</ulink>"
1320 section, which is in the Yocto Project Profiling and Tracing Manual. 1424 section, which is in the Yocto Project Profiling and
1321 <note>Do not use <filename>Lttng-user space (legacy)</filename> tool. 1425 Tracing Manual.
1426 <note>Do not use
1427 <filename>Lttng-user space (legacy)</filename> tool.
1322 This tool no longer has any upstream support.</note> 1428 This tool no longer has any upstream support.</note>
1323 </para> 1429 </para>
1324 <para>Before you use the <filename>Lttng2.0 ust trace import</filename> tool, 1430 <para>Before you use the
1431 <filename>Lttng2.0 ust trace import</filename> tool,
1325 you need to setup the Lttng Eclipse plug-in and create a 1432 you need to setup the Lttng Eclipse plug-in and create a
1326 Tracing project. 1433 Tracing project.
1327 Do the following: 1434 Do the following:
1328 <orderedlist> 1435 <orderedlist>
1329 <listitem><para>Select "Open Perspective" from the 1436 <listitem><para>Select "Open Perspective" from the
1330 "Window" menu and then select "Tracing".</para></listitem> 1437 "Window" menu and then select "Tracing".
1331 <listitem><para>Click "OK" to change the Eclipse perspective 1438 </para></listitem>
1332 into the Tracing perspective.</para></listitem> 1439 <listitem><para>Click "OK" to change the Eclipse
1333 <listitem><para>Create a new Tracing project by selecting 1440 perspective into the Tracing perspective.
1334 "Project" from the "File -> New" menu.</para></listitem>
1335 <listitem><para>Choose "Tracing Project" from the
1336 "Tracing" menu.
1337 </para></listitem> 1441 </para></listitem>
1338 <listitem><para>Generate your tracing data on the remote target. 1442 <listitem><para>Create a new Tracing project by
1443 selecting "Project" from the "File -> New" menu.
1339 </para></listitem> 1444 </para></listitem>
1340 <listitem><para>Select "Lttng2.0 ust trace import" from 1445 <listitem><para>Choose "Tracing Project" from the
1341 the "Yocto Project Tools" menu to 1446 "Tracing" menu.
1447 </para></listitem>
1448 <listitem><para>Generate your tracing data on the
1449 remote target.</para></listitem>
1450 <listitem><para>Select "Lttng2.0 ust trace import"
1451 from the "Yocto Project Tools" menu to
1342 start the data import process.</para></listitem> 1452 start the data import process.</para></listitem>
1343 <listitem><para>Specify your remote connection name.</para></listitem> 1453 <listitem><para>Specify your remote connection name.
1344 <listitem><para>For the Ust directory path, specify the location of 1454 </para></listitem>
1345 your remote tracing data. 1455 <listitem><para>For the Ust directory path, specify
1346 Make sure the location ends with <filename>ust</filename> (e.g. 1456 the location of your remote tracing data.
1347 <filename>/usr/mysession/ust</filename>).</para></listitem> 1457 Make sure the location ends with
1348 <listitem><para>Click "OK" to complete the import process. 1458 <filename>ust</filename> (e.g.
1349 The data is now in the local tracing project you created.</para></listitem> 1459 <filename>/usr/mysession/ust</filename>).
1350 <listitem><para>Right click on the data and then use the menu to 1460 </para></listitem>
1351 Select "Generic CTF Trace" from the 1461 <listitem><para>Click "OK" to complete the import
1352 "Trace Type... -> Common Trace Format" menu to map 1462 process.
1353 the tracing type.</para></listitem> 1463 The data is now in the local tracing project
1354 <listitem><para>Right click the mouse and select "Open" 1464 you created.</para></listitem>
1355 to bring up the Eclipse Lttng Trace Viewer so you 1465 <listitem><para>Right click on the data and then use
1356 view the tracing data.</para></listitem> 1466 the menu to Select "Generic CTF Trace" from the
1467 "Trace Type... -> Common Trace Format" menu to
1468 map the tracing type.</para></listitem>
1469 <listitem><para>Right click the mouse and select
1470 "Open" to bring up the Eclipse Lttng Trace
1471 Viewer so you view the tracing data.
1472 </para></listitem>
1357 </orderedlist></para></listitem> 1473 </orderedlist></para></listitem>
1358 <listitem><para><emphasis><filename>PowerTOP</filename>:</emphasis> Selecting this tool runs 1474 <listitem><para><emphasis><filename>PowerTOP</filename>:</emphasis>
1359 PowerTOP on the remote target machine and displays the results in a 1475 Selecting this tool runs PowerTOP on the remote target
1360 new view called PowerTOP.</para> 1476 machine and displays the results in a new view called
1361 <para>The "Time to gather data(sec):" field is the time passed in seconds before data 1477 PowerTOP.</para>
1362 is gathered from the remote target for analysis.</para> 1478 <para>The "Time to gather data(sec):" field is the time
1363 <para>The "show pids in wakeups list:" field corresponds to the 1479 passed in seconds before data is gathered from the
1364 <filename>-p</filename> argument 1480 remote target for analysis.</para>
1365 passed to <filename>PowerTOP</filename>.</para></listitem> 1481 <para>The "show pids in wakeups list:" field corresponds
1482 to the <filename>-p</filename> argument passed to
1483 <filename>PowerTOP</filename>.</para></listitem>
1366 <listitem><para><emphasis><filename>LatencyTOP and Perf</filename>:</emphasis> 1484 <listitem><para><emphasis><filename>LatencyTOP and Perf</filename>:</emphasis>
1367 LatencyTOP identifies system latency, while 1485 LatencyTOP identifies system latency, while
1368 Perf monitors the system's performance counter registers. 1486 Perf monitors the system's performance counter
1369 Selecting either of these tools causes an RSE terminal view to appear 1487 registers.
1370 from which you can run the tools. 1488 Selecting either of these tools causes an RSE terminal
1371 Both tools refresh the entire screen to display results while they run. 1489 view to appear from which you can run the tools.
1372 For more information on setting up and using <filename>perf</filename>, 1490 Both tools refresh the entire screen to display results
1373 see the 1491 while they run.
1492 For more information on setting up and using
1493 <filename>perf</filename>, see the
1374 "<ulink url='&YOCTO_DOCS_PROF_URL;#profile-manual-perf'>perf</ulink>" 1494 "<ulink url='&YOCTO_DOCS_PROF_URL;#profile-manual-perf'>perf</ulink>"
1375 section in the Yocto Project Profiling and Tracing Manual. 1495 section in the Yocto Project Profiling and Tracing
1496 Manual.
1376 For information on LatencyTOP, see the 1497 For information on LatencyTOP, see the
1377 <ulink url='https://latencytop.org/'>LatencyTOP</ulink> 1498 <ulink url='https://latencytop.org/'>LatencyTOP</ulink>
1378 website. 1499 website.
@@ -1385,37 +1506,43 @@
1385 <title>Customizing an Image Using a BitBake Commander Project and Hob</title> 1506 <title>Customizing an Image Using a BitBake Commander Project and Hob</title>
1386 1507
1387 <para> 1508 <para>
1388 Within the Eclipse IDE, you can create a Yocto BitBake Commander project, 1509 Within the Eclipse IDE, you can create a Yocto BitBake Commander
1389 edit the <link linkend='metadata'>Metadata</link>, and then use 1510 project, edit the <link linkend='metadata'>Metadata</link>, and
1390 <ulink url='&YOCTO_HOME_URL;/tools-resources/projects/hob'>Hob</ulink> to build a customized 1511 then use
1391 image all within one IDE. 1512 <ulink url='&YOCTO_HOME_URL;/tools-resources/projects/hob'>Hob</ulink> to build a customized image all within one IDE.
1392 </para> 1513 </para>
1393 1514
1394 <section id='creating-the-yocto-bitbake-commander-project'> 1515 <section id='creating-the-yocto-bitbake-commander-project'>
1395 <title>Creating the Yocto BitBake Commander Project</title> 1516 <title>Creating the Yocto BitBake Commander Project</title>
1396 1517
1397 <para> 1518 <para>
1398 To create a Yocto BitBake Commander project, follow these steps: 1519 To create a Yocto BitBake Commander project, follow these
1520 steps:
1399 <orderedlist> 1521 <orderedlist>
1400 <listitem><para>Select "Other" from the 1522 <listitem><para>Select "Other" from the
1401 "Window -> Open Perspective" menu 1523 "Window -> Open Perspective" menu
1402 and then choose "Bitbake Commander".</para></listitem> 1524 and then choose "Bitbake Commander".
1525 </para></listitem>
1403 <listitem><para>Click "OK" to change the perspective to 1526 <listitem><para>Click "OK" to change the perspective to
1404 Bitbake Commander.</para></listitem> 1527 Bitbake Commander.</para></listitem>
1405 <listitem><para>Select "Project" from the "File -> New" 1528 <listitem><para>Select "Project" from the "File -> New"
1406 menu to create a new Yocto 1529 menu to create a new Yocto
1407 Bitbake Commander project.</para></listitem> 1530 Bitbake Commander project.</para></listitem>
1408 <listitem><para>Choose "New Yocto Project" from the 1531 <listitem><para>Choose "New Yocto Project" from the
1409 "Yocto Project Bitbake Commander" menu and click 1532 "Yocto Project Bitbake Commander" menu and click
1410 "Next".</para></listitem> 1533 "Next".</para></listitem>
1411 <listitem><para>Enter the Project Name and choose the Project Location. 1534 <listitem><para>Enter the Project Name and choose the
1412 The Yocto project's Metadata files will be put under the directory 1535 Project Location.
1536 The Yocto project's Metadata files will be put under
1537 the directory
1413 <filename>&lt;project_location&gt;/&lt;project_name&gt;</filename>. 1538 <filename>&lt;project_location&gt;/&lt;project_name&gt;</filename>.
1414 If that directory does not exist, you need to check 1539 If that directory does not exist, you need to check
1415 the "Clone from Yocto Git Repository" box, which would execute a 1540 the "Clone from Yocto Git Repository" box, which
1416 <filename>git clone</filename> command to get the project's Metadata files. 1541 would execute a <filename>git clone</filename>
1542 command to get the project's Metadata files.
1417 </para></listitem> 1543 </para></listitem>
1418 <listitem><para>Select <filename>Finish</filename> to create the project.</para></listitem> 1544 <listitem><para>Select <filename>Finish</filename> to
1545 create the project.</para></listitem>
1419 </orderedlist> 1546 </orderedlist>
1420 </para> 1547 </para>
1421 </section> 1548 </section>
@@ -1424,32 +1551,38 @@
1424 <title>Editing the Metadata</title> 1551 <title>Editing the Metadata</title>
1425 1552
1426 <para> 1553 <para>
1427 After you create the Yocto Bitbake Commander project, you can modify the 1554 After you create the Yocto Bitbake Commander project, you
1428 <link linkend='metadata'>Metadata</link> files 1555 can modify the <link linkend='metadata'>Metadata</link>
1429 by opening them in the project. 1556 files by opening them in the project.
1430 When editing recipe files (<filename>.bb</filename> files), you can view BitBake 1557 When editing recipe files (<filename>.bb</filename> files),
1431 variable values and information by hovering the mouse pointer over the variable name and 1558 you can view BitBake variable values and information by
1559 hovering the mouse pointer over the variable name and
1432 waiting a few seconds. 1560 waiting a few seconds.
1433 </para> 1561 </para>
1434 1562
1435 <para> 1563 <para>
1436 To edit the Metadata, follow these steps: 1564 To edit the Metadata, follow these steps:
1437 <orderedlist> 1565 <orderedlist>
1438 <listitem><para>Select your Yocto Bitbake Commander project.</para></listitem> 1566 <listitem><para>Select your Yocto Bitbake Commander
1439 <listitem><para>Select "BitBake Recipe" from the 1567 project.</para></listitem>
1440 "File -> New -> Yocto BitBake Commander" menu 1568 <listitem><para>Select "BitBake Recipe" from the
1569 "File -> New -> Yocto BitBake Commander" menu
1441 to open a new recipe wizard.</para></listitem> 1570 to open a new recipe wizard.</para></listitem>
1442 <listitem><para>Point to your source by filling in the "SRC_URL" field. 1571 <listitem><para>Point to your source by filling in the
1572 "SRC_URL" field.
1443 For example, you can add a recipe to your 1573 For example, you can add a recipe to your
1444 <link linkend='source-directory'>Source Directory</link> 1574 <link linkend='source-directory'>Source Directory</link>
1445 by defining "SRC_URL" as follows: 1575 by defining "SRC_URL" as follows:
1446 <literallayout class='monospaced'> 1576 <literallayout class='monospaced'>
1447 ftp://ftp.gnu.org/gnu/m4/m4-1.4.9.tar.gz 1577 ftp://ftp.gnu.org/gnu/m4/m4-1.4.9.tar.gz
1448 </literallayout></para></listitem> 1578 </literallayout></para></listitem>
1449 <listitem><para>Click "Populate" to calculate the archive md5, sha256, 1579 <listitem><para>Click "Populate" to calculate the
1450 license checksum values and to auto-generate the recipe filename.</para></listitem> 1580 archive md5, sha256, license checksum values and to
1451 <listitem><para>Fill in the "Description" field.</para></listitem> 1581 auto-generate the recipe filename.</para></listitem>
1452 <listitem><para>Be sure values for all required fields exist.</para></listitem> 1582 <listitem><para>Fill in the "Description" field.
1583 </para></listitem>
1584 <listitem><para>Be sure values for all required
1585 fields exist.</para></listitem>
1453 <listitem><para>Click "Finish".</para></listitem> 1586 <listitem><para>Click "Finish".</para></listitem>
1454 </orderedlist> 1587 </orderedlist>
1455 </para> 1588 </para>
@@ -1459,20 +1592,24 @@
1459 <title>Building and Customizing the Image Using Hob</title> 1592 <title>Building and Customizing the Image Using Hob</title>
1460 1593
1461 <para> 1594 <para>
1462 To build and customize the image using Hob from within the 1595 To build and customize the image using Hob from within the
1463 Eclipse IDE, follow these steps: 1596 Eclipse IDE, follow these steps:
1464 <orderedlist> 1597 <orderedlist>
1465 <listitem><para>Select your Yocto Bitbake Commander project.</para></listitem> 1598 <listitem><para>Select your Yocto Bitbake Commander
1599 project.</para></listitem>
1466 <listitem><para>Select "Launch Hob" from the "Project" 1600 <listitem><para>Select "Launch Hob" from the "Project"
1467 menu.</para></listitem> 1601 menu.</para></listitem>
1468 <listitem><para>Enter the 1602 <listitem><para>Enter the
1469 <link linkend='build-directory'>Build Directory</link> 1603 <link linkend='build-directory'>Build Directory</link>
1470 where you want to put your final images.</para></listitem> 1604 where you want to put your final images.
1471 <listitem><para>Click "OK" to launch Hob.</para></listitem> 1605 </para></listitem>
1472 <listitem><para>Use Hob to customize and build your own images. 1606 <listitem><para>Click "OK" to launch Hob.
1607 </para></listitem>
1608 <listitem><para>Use Hob to customize and build your own
1609 images.
1473 For information on Hob, see the 1610 For information on Hob, see the
1474 <ulink url='&YOCTO_HOME_URL;/tools-resources/projects/hob'>Hob Project Page</ulink> on the 1611 <ulink url='&YOCTO_HOME_URL;/tools-resources/projects/hob'>Hob Project Page</ulink>
1475 Yocto Project website.</para></listitem> 1612 on the Yocto Project website.</para></listitem>
1476 </orderedlist> 1613 </orderedlist>
1477 </para> 1614 </para>
1478 </section> 1615 </section>
@@ -1508,7 +1645,7 @@
1508 support development using actual hardware. 1645 support development using actual hardware.
1509 For example, the area might contain 1646 For example, the area might contain
1510 <filename>.hddimg</filename> files that combine the 1647 <filename>.hddimg</filename> files that combine the
1511 kernel image with the filesystem, boot loaders, and 1648 kernel image with the filesystem, boot loaders, and
1512 so forth. 1649 so forth.
1513 Be sure to get the files you need for your particular 1650 Be sure to get the files you need for your particular
1514 development process.</para> 1651 development process.</para>
@@ -1879,9 +2016,9 @@
1879 2016
1880 <para> 2017 <para>
1881 For a better understanding of Hob, see the project page at 2018 For a better understanding of Hob, see the project page at
1882 <ulink url='&YOCTO_HOME_URL;/tools-resources/projects/hob'></ulink> 2019 <ulink url='&YOCTO_HOME_URL;/tools-resources/projects/hob'></ulink>
1883 on the Yocto Project website. 2020 on the Yocto Project website.
1884 If you follow the "Documentation" link from the Hob page, you will 2021 If you follow the "Documentation" link from the Hob page, you will
1885 find a short introductory training video on Hob. 2022 find a short introductory training video on Hob.
1886 The following lists some features of Hob: 2023 The following lists some features of Hob:
1887 <itemizedlist> 2024 <itemizedlist>
@@ -1893,9 +2030,9 @@
1893 <listitem><para>You can set the 2030 <listitem><para>You can set the
1894 <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink> 2031 <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
1895 for which you are building the image.</para></listitem> 2032 for which you are building the image.</para></listitem>
1896 <listitem><para>You can modify various policy settings such as the 2033 <listitem><para>You can modify various policy settings such as the
1897 package format with which to build, 2034 package format with which to build,
1898 the parallelism BitBake uses, whether or not to build an 2035 the parallelism BitBake uses, whether or not to build an
1899 external toolchain, and which host to build against. 2036 external toolchain, and which host to build against.
1900 </para></listitem> 2037 </para></listitem>
1901 <listitem><para>You can manage 2038 <listitem><para>You can manage
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-19 14:36:49 +0000