summaryrefslogtreecommitdiffstats
path: root/documentation/sdk-manual/sdk-using.xml
diff options
context:
space:
mode:
authorScott Rifenbark <srifenbark@gmail.com>2016-09-02 17:24:56 -0700
committerRichard Purdie <richard.purdie@linuxfoundation.org>2016-09-23 15:27:33 +0100
commit3277d8d307d580711870ca0a3901225b053a4171 (patch)
treee68770ffb79896d151230bdad87398cb72824207 /documentation/sdk-manual/sdk-using.xml
parent8a3d542d5ca2ce282f4c255a2023d3e71160b710 (diff)
downloadpoky-3277d8d307d580711870ca0a3901225b053a4171.tar.gz
sdk-manual: Updates to "Working With Eclips" for Neon
Fixes [YOCTO #7546] Applied changes throughout this section to move it from Luna to the Neon version (latest) of Eclipse. We now provide a single thread for Eclipse, which is based on the latest version (Neon). Information for Mars, which is also supported) is in a new Appendix C. (From yocto-docs rev: 82995d9c49e4c55707591a1375c5d86874c589b0) Signed-off-by: Scott Rifenbark <srifenbark@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Diffstat (limited to 'documentation/sdk-manual/sdk-using.xml')
-rw-r--r--documentation/sdk-manual/sdk-using.xml713
1 files changed, 420 insertions, 293 deletions
diff --git a/documentation/sdk-manual/sdk-using.xml b/documentation/sdk-manual/sdk-using.xml
index 70c1bf5c77..6b14f1b575 100644
--- a/documentation/sdk-manual/sdk-using.xml
+++ b/documentation/sdk-manual/sdk-using.xml
@@ -558,7 +558,7 @@
558 Once your application is deployed, you need to test it. 558 Once your application is deployed, you need to test it.
559 Within the Eclipse IDE, you can use the debugging 559 Within the Eclipse IDE, you can use the debugging
560 environment along with supported performance enhancing 560 environment along with supported performance enhancing
561 <ulink url='http://www.eclipse.org/linuxtools/'>tools</ulink>. 561 <ulink url='http://www.eclipse.org/linuxtools/'>Linux Tools</ulink>.
562 </para></listitem> 562 </para></listitem>
563 </orderedlist> 563 </orderedlist>
564 </para> 564 </para>
@@ -567,20 +567,9 @@
567 <section id='adt-eclipse'> 567 <section id='adt-eclipse'>
568 <title>Working Within Eclipse</title> 568 <title>Working Within Eclipse</title>
569 569
570 <para role="writernotes">
571 This section needs to be updated to use Eclipse Neon throughout.
572 It is out of date at the moment.
573 </para>
574
575 <para> 570 <para>
576 The Eclipse IDE is a popular development environment and it fully 571 The Eclipse IDE is a popular development environment and it fully
577 supports development using the Yocto Project. 572 supports development using the Yocto Project.
578 <note>
579 This release of the Yocto Project supports both the Luna
580 and Kepler versions of the Eclipse IDE.
581 Thus, the following information provides setup information for
582 both versions.
583 </note>
584 </para> 573 </para>
585 574
586 <para> 575 <para>
@@ -598,27 +587,31 @@
598 allow you to perform remote profiling, tracing, collection of 587 allow you to perform remote profiling, tracing, collection of
599 power data, collection of latency data, and collection of 588 power data, collection of latency data, and collection of
600 performance data. 589 performance data.
590 <note>
591 This release of the Yocto Project supports both the Neon
592 and Mars versions of the Eclipse IDE.
593 This section provides information on how to use the Neon
594 release with the Yocto Project.
595 For information on how to use the Mars version of Eclipse
596 with the Yocto Project, see
597 "<link linkend='sdk-appendix-mars'>Appendix C</link>.
598 </note>
601 </para> 599 </para>
602 600
603 <para> 601 <section id='neon-setting-up-the-eclipse-ide'>
604 This section describes how to install and configure the Eclipse IDE 602 <title>Setting Up the Neon Version of the Eclipse IDE</title>
605 Yocto Plug-in and how to use it to develop your application.
606 </para>
607
608 <section id='setting-up-the-eclipse-ide'>
609 <title>Setting Up the Eclipse IDE</title>
610 603
611 <para> 604 <para>
612 To develop within the Eclipse IDE, you need to do the following: 605 To develop within the Eclipse IDE, you need to do the following:
613 <orderedlist> 606 <orderedlist>
614 <listitem><para>Install the optimal version of the Eclipse 607 <listitem><para>Install the Neon version of the Eclipse
615 IDE.</para></listitem> 608 IDE.</para></listitem>
616 <listitem><para>Configure the Eclipse IDE. 609 <listitem><para>Configure the Eclipse IDE.
617 </para></listitem> 610 </para></listitem>
618 <listitem><para>Install the Eclipse Yocto Plug-in. 611 <listitem><para>Install the Eclipse Yocto Plug-in.
619 </para></listitem> 612 </para></listitem>
620 <listitem><para>Configure the Eclipse Yocto Plug-in. 613 <listitem><para>Configure the Eclipse Yocto Plug-in.
621 </para></listitem> 614 </para></listitem>
622 </orderedlist> 615 </orderedlist>
623 <note> 616 <note>
624 Do not install Eclipse from your distribution's package 617 Do not install Eclipse from your distribution's package
@@ -628,110 +621,120 @@
628 </note> 621 </note>
629 </para> 622 </para>
630 623
631 <section id='installing-eclipse-ide'> 624 <section id='neon-installing-eclipse-ide'>
632 <title>Installing the Eclipse IDE</title> 625 <title>Installing the Neon Eclipse IDE</title>
633
634 <para>
635 It is recommended that you have the Luna SR2 (4.4.2)
636 version of the Eclipse IDE installed on your development
637 system.
638 However, if you currently have the Kepler 4.3.2 version
639 installed and you do not want to upgrade the IDE, you can
640 configure Kepler to work with the Yocto Project.
641 </para>
642 626
643 <para> 627 <para>
644 If you do not have the Luna SR2 (4.4.2) Eclipse IDE 628 Follow these steps to locate, install, and configure
645 installed, you can find the tarball at 629 Neon Eclipse:
646 <ulink url='&ECLIPSE_MAIN_URL;'></ulink>. 630 <orderedlist>
647 From that site, choose the appropriate download from the 631 <listitem><para>
648 "Eclipse IDE for C/C++ Developers". 632 <emphasis>Locate the Neon Download:</emphasis>
649 This version contains the Eclipse Platform, the Java 633 Open a browser and go to
650 Development Tools (JDT), and the Plug-in Development 634 <ulink url='http://www.eclipse.org/mars/'>http://www.eclipse.org/neon/</ulink>.
651 Environment. 635 </para></listitem>
652 </para> 636 <listitem><para>
653 637 <emphasis>Download the Tarball:</emphasis>
654 <para> 638 Click through the "Download" buttons to
655 Once you have downloaded the tarball, extract it into a 639 download the file.
656 clean directory. 640 </para></listitem>
657 For example, the following commands unpack and install the 641 <listitem><para>
658 downloaded Eclipse IDE tarball into a clean directory 642 <emphasis>Unpack the Tarball:</emphasis>
659 using the default name <filename>eclipse</filename>: 643 Move to a clean directory and unpack the tarball.
660 <literallayout class='monospaced'> 644 Here is an example:
645 <literallayout class='monospaced'>
661 $ cd ~ 646 $ cd ~
662 $ tar -xzvf ~/Downloads/eclipse-cpp-luna-SR2-linux-gtk-x86_64.tar.gz 647 $ tar -xzvf ~/Downloads/eclipse-inst-linux64.tar.gz
663 </literallayout> 648 </literallayout>
649 Everything unpacks into a folder named
650 "eclipse-installer".
651 </para></listitem>
652 <listitem><para>
653 <emphasis>Launch the Installer:</emphasis>
654 Use the following commands to launch the installer:
655 <literallayout class='monospaced'>
656 $ cd ~/eclipse-installer
657 $ ./eclipse-inst
658 </literallayout>
659 </para></listitem>
660 <listitem><para>
661 <emphasis>Select Your IDE:</emphasis>
662 From the list, select the "Eclipse IDE for
663 C/C++ Developers".
664 </para></listitem>
665 <listitem><para>
666 <emphasis>Install the Software:</emphasis>
667 Accept the default "cpp-neon" directory and click
668 "Install".
669 Accept any license agreements and approve any
670 certificates.
671 </para></listitem>
672 <listitem><para>
673 <emphasis>Launch Neon:</emphasis>
674 Click the "Launch" button and accept the default
675 "workspace".
676 </para></listitem>
677 </orderedlist>
664 </para> 678 </para>
665 </section> 679 </section>
666 680
667 <section id='configuring-the-eclipse-ide'> 681 <section id='neon-configuring-the-mars-eclipse-ide'>
668 <title>Configuring the Eclipse IDE</title> 682 <title>Configuring the Neon Eclipse IDE</title>
669
670 <para>
671 This section presents the steps needed to configure the
672 Eclipse IDE.
673 </para>
674 683
675 <para> 684 <para>
676 Before installing and configuring the Eclipse Yocto Plug-in, 685 Follow these steps to configure the Neon Eclipse IDE.
677 you need to configure the Eclipse IDE. 686 <note>
678 Follow these general steps: 687 Depending on how you installed Eclipse and what you have
688 already done, some of the options will not appear.
689 If you cannot find an option as directed by the manual,
690 it has already been installed.
691 </note>
679 <orderedlist> 692 <orderedlist>
680 <listitem><para>Start the Eclipse IDE.</para></listitem> 693 <listitem><para>Be sure Eclipse is running and
681 <listitem><para>Make sure you are in your Workbench and 694 you are in your workbench.
682 select "Install New Software" from the "Help" 695 </para></listitem>
683 pull-down menu.</para></listitem> 696 <listitem><para>Select "Install New Software" from
697 the "Help" pull-down menu.
698 </para></listitem>
684 <listitem><para>Select 699 <listitem><para>Select
685 <filename>Luna - &ECLIPSE_LUNA_URL;</filename> 700 "Neon - http://download.eclipse.org/releases/neon"
686 from the "Work with:" pull-down menu. 701 from the "Work with:" pull-down menu.
687 <note>
688 For Kepler, select
689 <filename>Kepler - &ECLIPSE_KEPLER_URL;</filename>
690 </note>
691 </para></listitem> 702 </para></listitem>
692 <listitem><para>Expand the box next to "Linux Tools" 703 <listitem><para>Expand the box next to
693 and select the 704 "Linux Tools" and select the following:
694 <filename>Linux Tools LTTng Tracer Control</filename>, 705 <literallayout class='monospaced'>
695 <filename>Linux Tools LTTng Userspace Analysis</filename>, 706 C/C++ Remote (Over TCF/TE) Run/Debug Launcher
696 and 707 TM Terminal
697 <filename>LTTng Kernel Analysis</filename> boxes. 708 </literallayout>
698 If these selections do not appear in the list,
699 that means the items are already installed.
700 <note>
701 For Kepler, select
702 <filename>LTTng - Linux Tracing Toolkit</filename>
703 box.
704 </note>
705 </para></listitem> 709 </para></listitem>
706 <listitem><para>Expand the box next to "Mobile and 710 <listitem><para>Expand the box next to "Mobile and
707 Device Development" and select the following boxes. 711 Device Development" and select the following
708 Again, if any of the following items are not 712 boxes:
709 available for selection, that means the items are 713 <literallayout class='monospaced'>
710 already installed: 714 C/C++ Remote (Over TCF/TE) Run/Debug Launcher
711 <itemizedlist> 715 Remote System Explorer User Actions
712 <listitem><para><filename>C/C++ Remote Launch (Requires RSE Remote System Explorer)</filename></para></listitem> 716 TM Terminal
713 <listitem><para><filename>Remote System Explorer End-user Runtime</filename></para></listitem> 717 TCF Remote System Explorer add-in
714 <listitem><para><filename>Remote System Explorer User Actions</filename></para></listitem> 718 TCF Target Explorer
715 <listitem><para><filename>Target Management Terminal (Core SDK)</filename></para></listitem> 719 </literallayout>
716 <listitem><para><filename>TCF Remote System Explorer add-in</filename></para></listitem> 720 </para></listitem>
717 <listitem><para><filename>TCF Target Explorer</filename></para></listitem> 721 <listitem><para>Expand the box next to
718 </itemizedlist></para></listitem> 722 "Programming Languages" and select the
719 <listitem><para>Expand the box next to "Programming 723 following box:
720 Languages" and select the 724 <literallayout class='monospaced'>
721 <filename>C/C++ Autotools Support</filename> 725 C/C++ Development Tools SDK
722 and <filename>C/C++ Development Tools</filename> 726 </literallayout>
723 boxes. 727 </para></listitem>
724 For Luna, these items do not appear on the list 728 <listitem><para>
725 as they are already installed. 729 Complete the installation by clicking through
730 appropriate "Next" and "Finish" buttons.
726 </para></listitem> 731 </para></listitem>
727 <listitem><para>Complete the installation and restart
728 the Eclipse IDE.</para></listitem>
729 </orderedlist> 732 </orderedlist>
730 </para> 733 </para>
731 </section> 734 </section>
732 735
733 <section id='installing-the-eclipse-yocto-plug-in'> 736 <section id='neon-installing-the-eclipse-yocto-plug-in'>
734 <title>Installing or Accessing the Eclipse Yocto Plug-in</title> 737 <title>Installing or Accessing the Neon Eclipse Yocto Plug-in</title>
735 738
736 <para> 739 <para>
737 You can install the Eclipse Yocto Plug-in into the Eclipse 740 You can install the Eclipse Yocto Plug-in into the Eclipse
@@ -740,12 +743,12 @@
740 install the plug-in from the latest source code. 743 install the plug-in from the latest source code.
741 </para> 744 </para>
742 745
743 <section id='new-software'> 746 <section id='neon-new-software'>
744 <title>Installing the Pre-built Plug-in from the Yocto Project Eclipse Update Site</title> 747 <title>Installing the Pre-built Plug-in from the Yocto Project Eclipse Update Site</title>
745 748
746 <para> 749 <para>
747 To install the Eclipse Yocto Plug-in from the update 750 To install the Neon Eclipse Yocto Plug-in from the
748 site, follow these steps: 751 update site, follow these steps:
749 <orderedlist> 752 <orderedlist>
750 <listitem><para>Start up the Eclipse IDE. 753 <listitem><para>Start up the Eclipse IDE.
751 </para></listitem> 754 </para></listitem>
@@ -753,27 +756,24 @@
753 Software" from the "Help" menu. 756 Software" from the "Help" menu.
754 </para></listitem> 757 </para></listitem>
755 <listitem><para>Click "Add..." in the "Work with:" 758 <listitem><para>Click "Add..." in the "Work with:"
756 area.</para></listitem> 759 area.
757 <listitem><para>Enter 760 </para></listitem>
758 <filename>&ECLIPSE_DL_PLUGIN_URL;/luna</filename> 761 <listitem><para>Enter
762 <filename>&ECLIPSE_DL_PLUGIN_URL;/neon</filename>
759 in the URL field and provide a meaningful name 763 in the URL field and provide a meaningful name
760 in the "Name" field. 764 in the "Name" field.
761 <note> 765 </para></listitem>
762 If you are using Kepler, use
763 <filename>&ECLIPSE_DL_PLUGIN_URL;/kepler</filename>
764 in the URL field.
765 </note></para></listitem>
766 <listitem><para>Click "OK" to have the entry added 766 <listitem><para>Click "OK" to have the entry added
767 to the "Work with:" drop-down list. 767 to the "Work with:" drop-down list.
768 </para></listitem> 768 </para></listitem>
769 <listitem><para>Select the entry for the plug-in 769 <listitem><para>Select the entry for the plug-in
770 from the "Work with:" drop-down list. 770 from the "Work with:" drop-down list.
771 </para></listitem> 771 </para></listitem>
772 <listitem><para>Check the boxes next to 772 <listitem><para>Check the boxes next to the following:
773 <filename>Yocto Project ADT Plug-in</filename>, 773 <literallayout class='monospaced'>
774 <filename>Yocto Project Bitbake Commander Plug-in</filename>, 774 Yocto Project SDK Plug-in
775 and 775 Yocto Project Documentation plug-in
776 <filename>Yocto Project Documentation plug-in</filename>. 776 </literallayout>
777 </para></listitem> 777 </para></listitem>
778 <listitem><para>Complete the remaining software 778 <listitem><para>Complete the remaining software
779 installation steps and then restart the Eclipse 779 installation steps and then restart the Eclipse
@@ -788,61 +788,55 @@
788 </para> 788 </para>
789 </section> 789 </section>
790 790
791 <section id='zip-file-method'> 791 <section id='neon-zip-file-method'>
792 <title>Installing the Plug-in Using the Latest Source Code</title> 792 <title>Installing the Plug-in Using the Latest Source Code</title>
793 793
794 <para> 794 <para>
795 To install the Eclipse Yocto Plug-in from the latest 795 To install the Neon Eclipse Yocto Plug-in from the
796 source code, follow these steps: 796 latest source code, follow these steps:
797 <orderedlist> 797 <orderedlist>
798 <listitem><para>Be sure your development system 798 <listitem><para>Be sure your development system
799 is not using OpenJDK to build the plug-in 799 has JDK 1.7+
800 by doing the following:
801 <orderedlist>
802 <listitem><para>Use the Oracle JDK.
803 If you don't have that, go to
804 <ulink url='http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html'></ulink>
805 and download the latest appropriate
806 Java SE Development Kit tarball for
807 your development system and
808 extract it into your home directory.
809 </para></listitem>
810 <listitem><para>In the shell you are going
811 to do your work, export the location of
812 the Oracle Java.
813 The previous step creates a new folder
814 for the extracted software.
815 You need to use the following
816 <filename>export</filename> command
817 and provide the specific location:
818 <literallayout class='monospaced'>
819 export PATH=~/<replaceable>extracted_jdk_location</replaceable>/bin:$PATH
820 </literallayout>
821 </para></listitem>
822 </orderedlist>
823 </para></listitem> 800 </para></listitem>
824 <listitem><para>In the same shell, create a Git 801 <listitem><para>install X11-related packages:
825 repository with: 802 <literallayout class='monospaced'>
803 $ sudo apt-get install xauth
804 </literallayout>
805 </para></listitem>
806 <listitem><para>In a new terminal shell, create a
807 Git repository with:
826 <literallayout class='monospaced'> 808 <literallayout class='monospaced'>
827 $ cd ~ 809 $ cd ~
828 $ git clone git://git.yoctoproject.org/eclipse-poky 810 $ git clone git://git.yoctoproject.org/eclipse-poky
829 </literallayout> 811 </literallayout>
830 </para></listitem> 812 </para></listitem>
831 <listitem><para>Be sure to checkout the correct 813 <listitem><para>Use Git to create the correct
832 tag. 814 tag:
833 For example, if you are using Luna, do the 815
834 following: 816 <note><title>Developer's Note</title>
817 <para role='writernotes'>
818 Because the 2.2 tag will not exist until after
819 the release, I must first do the following
820 before running the
821 <filename>git checkout mars/yocto-&DISTRO;</filename>
822 command in this step:
823 <literallayout class='monospaced'>
824 $ cd ~/eclipse-poky
825 $ git tag neon/yocto-2.2 origin/neon-master
826 </literallayout></para>
827 </note>
828
835 <literallayout class='monospaced'> 829 <literallayout class='monospaced'>
836 $ git checkout luna/yocto-&DISTRO; 830 $ cd ~/eclipse-poky
831 $ git checkout neon/yocto-&DISTRO;
837 </literallayout> 832 </literallayout>
838 This puts you in a detached HEAD state, which 833 This creates a local tag named
834 <filename>neon/yocto-&DISTRO;</filename>
835 based on the branch
836 <filename>origin/neon-master</filename>.
837 You are put into a detached HEAD state, which
839 is fine since you are only going to be building 838 is fine since you are only going to be building
840 and not developing. 839 and not developing.
841 <note>
842 If you are building kepler, checkout the
843 <filename>kepler/yocto-&DISTRO;</filename>
844 branch.
845 </note>
846 </para></listitem> 840 </para></listitem>
847 <listitem><para>Change to the 841 <listitem><para>Change to the
848 <filename>scripts</filename> 842 <filename>scripts</filename>
@@ -856,27 +850,29 @@
856 <literallayout class='monospaced'> 850 <literallayout class='monospaced'>
857 $ ./setup.sh 851 $ ./setup.sh
858 </literallayout> 852 </literallayout>
859 </para></listitem> 853 When the script finishes execution,
860 <listitem><para>When the script finishes execution,
861 it prompts you with instructions on how to run 854 it prompts you with instructions on how to run
862 the <filename>build.sh</filename> script, which 855 the <filename>build.sh</filename> script, which
863 is also in the <filename>scripts</filename> 856 is also in the <filename>scripts</filename>
864 directory of the Git repository created 857 directory of the Git repository created
865 earlier. 858 earlier.
866 </para></listitem> 859 </para></listitem>
867 <listitem><para>Run the <filename>build.sh</filename> 860 <listitem><para>
861 Run the <filename>build.sh</filename>
868 script as directed. 862 script as directed.
869 Be sure to provide the tag name, documentation 863 Be sure to provide the tag name, documentation
870 branch, and a release name. 864 branch, and a release name.</para>
871 Here is an example that uses the 865 <para>
872 <filename>luna/yocto-&DISTRO;</filename> tag, the 866 Following is an example:
873 <filename>master</filename> documentation
874 branch, and
875 <filename>&DISTRO_NAME_NO_CAP;</filename> for the
876 release name:
877 <literallayout class='monospaced'> 867 <literallayout class='monospaced'>
878 $ ECLIPSE_HOME=/home/scottrif/eclipse-poky/scripts/eclipse ./build.sh luna/yocto-&DISTRO; master &DISTRO_NAME_NO_CAP; 2>&amp;1 | tee -a build.log 868 $ ECLIPSE_HOME=/home/scottrif/eclipse-poky/scripts/eclipse ./build.sh -l neon/yocto-&DISTRO; master yocto-&DISTRO; 2>&amp;1 | tee build.log
879 </literallayout> 869 </literallayout>
870 The previous example command adds the tag you
871 need for
872 <filename>mars/yocto-&DISTRO;</filename>
873 to <filename>HEAD</filename>, then tells the
874 build script to use the local (-l) Git checkout
875 for the build.
880 After running the script, the file 876 After running the script, the file
881 <filename>org.yocto.sdk-</filename><replaceable>release</replaceable><filename>-</filename><replaceable>date</replaceable><filename>-archive.zip</filename> 877 <filename>org.yocto.sdk-</filename><replaceable>release</replaceable><filename>-</filename><replaceable>date</replaceable><filename>-archive.zip</filename>
882 is in the current directory. 878 is in the current directory.
@@ -887,12 +883,13 @@
887 <listitem><para>Select "Install New Software" from 883 <listitem><para>Select "Install New Software" from
888 the "Help" pull-down menu. 884 the "Help" pull-down menu.
889 </para></listitem> 885 </para></listitem>
890 <listitem><para>Click "Add".</para></listitem> 886 <listitem><para>Click "Add".
887 </para></listitem>
891 <listitem><para>Provide anything you want in the 888 <listitem><para>Provide anything you want in the
892 "Name" field. 889 "Name" field.
893 </para></listitem> 890 </para></listitem>
894 <listitem><para>Click "Archive" and browse to the 891 <listitem><para>Click "Archive" and browse to the
895 ZIP file you built in step eight. 892 ZIP file you built earlier.
896 This ZIP file should not be "unzipped", and must 893 This ZIP file should not be "unzipped", and must
897 be the <filename>*archive.zip</filename> file 894 be the <filename>*archive.zip</filename> file
898 created by running the 895 created by running the
@@ -902,10 +899,20 @@
902 </para></listitem> 899 </para></listitem>
903 <listitem><para>Check the boxes that appear in 900 <listitem><para>Check the boxes that appear in
904 the installation window to install the 901 the installation window to install the
905 <filename>Yocto Project ADT Plug-in</filename>, 902 following:
906 <filename>Yocto Project Bitbake Commander Plug-in</filename>, 903
907 and the 904 <note><title>Developer's Note</title>
908 <filename>Yocto Project Documentation plug-in</filename>. 905 <para role='writernotes'>
906 Right now, a check box for BitBake Commander
907 is appearing.
908 This probably needs removed.
909 Do not check this box.</para>
910 </note>
911
912 <literallayout class='monospaced'>
913 Yocto Project SDK Plug-in
914 Yocto Project Documentation plug-in
915 </literallayout>
909 </para></listitem> 916 </para></listitem>
910 <listitem><para>Finish the installation by clicking 917 <listitem><para>Finish the installation by clicking
911 through the appropriate buttons. 918 through the appropriate buttons.
@@ -922,17 +929,18 @@
922 <para> 929 <para>
923 At this point you should be able to configure the 930 At this point you should be able to configure the
924 Eclipse Yocto Plug-in as described in the 931 Eclipse Yocto Plug-in as described in the
925 "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>" 932 "<link linkend='mars-configuring-the-eclipse-yocto-plug-in'>Configuring the Neon Eclipse Yocto Plug-in</link>"
926 section.</para> 933 section.
934 </para>
927 </section> 935 </section>
928 </section> 936 </section>
929 937
930 <section id='configuring-the-eclipse-yocto-plug-in'> 938 <section id='neon-configuring-the-eclipse-yocto-plug-in'>
931 <title>Configuring the Eclipse Yocto Plug-in</title> 939 <title>Configuring the Neon Eclipse Yocto Plug-in</title>
932 940
933 <para> 941 <para>
934 Configuring the Eclipse Yocto Plug-in involves setting the 942 Configuring the Neon Eclipse Yocto Plug-in involves
935 Cross Compiler options and the Target options. 943 setting the Cross Compiler options and the Target options.
936 The configurations you choose become the default settings 944 The configurations you choose become the default settings
937 for all projects. 945 for all projects.
938 You do have opportunities to change them later when 946 You do have opportunities to change them later when
@@ -946,17 +954,28 @@
946 <listitem><para>Choose "Preferences" from the 954 <listitem><para>Choose "Preferences" from the
947 "Window" menu to display the Preferences Dialog. 955 "Window" menu to display the Preferences Dialog.
948 </para></listitem> 956 </para></listitem>
949 <listitem><para>Click "Yocto Project ADT" to display 957 <listitem><para>Click "Yocto Project SDK" to display
950 the configuration screen. 958 the configuration screen.
951 </para></listitem> 959 </para></listitem>
952 </itemizedlist> 960 </itemizedlist>
961 The following sub-sections describe how to configure the
962 the plug-in.
963 <note>
964 Throughout the descriptions, a start-to-finish example for
965 preparing a QEMU image for use with Eclipse is referenced
966 as the "wiki" and is linked to the example on the
967 <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'> Cookbook guide to Making an Eclipse Debug Capable Image</ulink>
968 wiki page.
969 </note>
953 </para> 970 </para>
954 971
955 <section id='configuring-the-cross-compiler-options'> 972 <section id='neon-configuring-the-cross-compiler-options'>
956 <title>Configuring the Cross-Compiler Options</title> 973 <title>Configuring the Cross-Compiler Options</title>
957 974
958 <para> 975 <para>
959 To configure the Cross Compiler Options, you must select 976 Cross Compiler options enable Eclipse to use your specific
977 cross compiler toolchain.
978 To configure these options, you must select
960 the type of toolchain, point to the toolchain, specify 979 the type of toolchain, point to the toolchain, specify
961 the sysroot location, and select the target 980 the sysroot location, and select the target
962 architecture. 981 architecture.
@@ -970,7 +989,7 @@
970 <itemizedlist> 989 <itemizedlist>
971 <listitem><para><emphasis> 990 <listitem><para><emphasis>
972 <filename>Standalone Pre-built Toolchain:</filename></emphasis> 991 <filename>Standalone Pre-built Toolchain:</filename></emphasis>
973 Select this mode when you are using 992 Select this type when you are using
974 a stand-alone cross-toolchain. 993 a stand-alone cross-toolchain.
975 For example, suppose you are an 994 For example, suppose you are an
976 application developer and do not 995 application developer and do not
@@ -978,45 +997,66 @@
978 Instead, you just want to use an 997 Instead, you just want to use an
979 architecture-specific toolchain on 998 architecture-specific toolchain on
980 an existing kernel and target root 999 an existing kernel and target root
981 filesystem.</para></listitem> 1000 filesystem.
982 <listitem><para><emphasis> 1001 In other words, you have downloaded
1002 and installed a pre-built toolchain
1003 for an existing image.
1004 </para></listitem>
1005 <listitem><para><emphasis>
983 <filename>Build System Derived Toolchain:</filename></emphasis> 1006 <filename>Build System Derived Toolchain:</filename></emphasis>
984 Select this mode if the 1007 Select this type if you built the
985 cross-toolchain has been installed 1008 toolchain as part of the
986 and built as part of the
987 <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>. 1009 <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
988 When you select 1010 When you select
989 <filename>Build system derived toolchain</filename>, 1011 <filename>Build system derived toolchain</filename>,
990 you are using the toolchain bundled 1012 you are using the toolchain built and
991 inside the Build Directory. 1013 bundled inside the Build Directory.
1014 For example, suppose you created a
1015 suitable image using the steps in the
1016 <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>wiki</ulink>.
1017 In this situation, you would select the
1018 <filename>Build system derived toolchain</filename>.
992 </para></listitem> 1019 </para></listitem>
993 </itemizedlist> 1020 </itemizedlist>
994 </para></listitem> 1021 </para></listitem>
995 <listitem><para><emphasis>Point to the Toolchain:</emphasis> 1022 <listitem><para><emphasis>Specify the Toolchain Root Location:</emphasis>
996 If you are using a stand-alone pre-built 1023 If you are using a stand-alone pre-built
997 toolchain, you should be pointing to where it is 1024 toolchain, you should be pointing to where it is
998 installed. 1025 installed (e.g.
1026 <filename>/opt/poky/&DISTRO;</filename>).
999 See the 1027 See the
1000 "<link linkend='sdk-installing-the-sdk'>Installing the SDK</link>" 1028 "<link linkend='sdk-installing-the-sdk'>Installing the SDK</link>"
1001 section for information about how the SDK is 1029 section for information about how the SDK is
1002 installed.</para> 1030 installed.</para>
1003 <para>If you are using a system-derived 1031 <para>If you are using a build system derived
1004 toolchain, the path you provide for the 1032 toolchain, the path you provide for the
1005 <filename>Toolchain Root Location</filename> 1033 <filename>Toolchain Root Location</filename>
1006 field is the 1034 field is the
1007 <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>. 1035 <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
1008 See the 1036 from which you run the
1037 <filename>bitbake</filename> command (e.g
1038 <filename>/home/scottrif/poky/build</filename>).</para>
1039 <para>For more information, see the
1009 "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>" 1040 "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
1010 section.</para></listitem> 1041 section.
1011 <listitem><para><emphasis>Specify the Sysroot Location:</emphasis> 1042 </para></listitem>
1043 <listitem><para><emphasis>Specify Sysroot Location:</emphasis>
1012 This location is where the root filesystem for 1044 This location is where the root filesystem for
1013 the target hardware resides. 1045 the target hardware resides.
1014 </para> 1046 </para>
1015 <para>The location of 1047 <para>This location depends on where you
1016 the sysroot filesystem depends on where you 1048 separately extracted and installed the target
1017 separately extracted and installed the 1049 filesystem.
1018 filesystem.</para> 1050 As an example, suppose you prepared an image
1019 <para>For information on how to install the 1051 using the steps in the
1052 <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>wiki</ulink>.
1053 If so, the <filename>MY_QEMU_ROOTFS</filename>
1054 directory is found in the
1055 <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
1056 and you would browse to and select that directory
1057 (e.g. <filename>/home/scottrif/poky/build/MY_QEMU_ROOTFS</filename>).
1058 </para>
1059 <para>For more information on how to install the
1020 toolchain and on how to extract and install the 1060 toolchain and on how to extract and install the
1021 sysroot filesystem, see the 1061 sysroot filesystem, see the
1022 "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>" 1062 "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
@@ -1035,12 +1075,15 @@
1035 See the 1075 See the
1036 "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>" 1076 "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
1037 section of the Yocto Project Quick Start for 1077 section of the Yocto Project Quick Start for
1038 more information.</para></listitem> 1078 more information.
1079 You can also see the
1080 <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>wiki</ulink>.
1081 </para></listitem>
1039 </itemizedlist> 1082 </itemizedlist>
1040 </para> 1083 </para>
1041 </section> 1084 </section>
1042 1085
1043 <section id='configuring-the-target-options'> 1086 <section id='neon-configuring-the-target-options'>
1044 <title>Configuring the Target Options</title> 1087 <title>Configuring the Target Options</title>
1045 1088
1046 <para> 1089 <para>
@@ -1054,16 +1097,24 @@
1054 If you are using the emulator, you also need to 1097 If you are using the emulator, you also need to
1055 locate the kernel and specify any custom 1098 locate the kernel and specify any custom
1056 options.</para> 1099 options.</para>
1057 <para>If you selected 1100 <para>If you selected the
1058 <filename>Build system derived toolchain</filename>, 1101 <filename>Build system derived toolchain</filename>,
1059 the target kernel you built will be located in 1102 the target kernel you built will be located in
1060 the Build Directory in 1103 the
1104 <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
1105 in
1061 <filename>tmp/deploy/images/<replaceable>machine</replaceable></filename> 1106 <filename>tmp/deploy/images/<replaceable>machine</replaceable></filename>
1062 directory. 1107 directory.
1063 If you selected 1108 As an example, suppose you performed the steps in
1064 <filename>Standalone pre-built toolchain</filename>, 1109 the
1065 the pre-built image you downloaded is located 1110 <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>wiki</ulink>.
1066 in the directory you specified when you 1111 In this case, you specify your Build Directory path
1112 followed by the image (e.g.
1113 <filename>/home/scottrif/poky/build/tmp/deploy/images/qemux86/bzImage-qemux86.bin</filename>).
1114 </para>
1115 <para>If you selected the standalone pre-built
1116 toolchain, the pre-built image you downloaded is
1117 located in the directory you specified when you
1067 downloaded the image.</para> 1118 downloaded the image.</para>
1068 <para>Most custom options are for advanced QEMU 1119 <para>Most custom options are for advanced QEMU
1069 users to further customize their QEMU instance. 1120 users to further customize their QEMU instance.
@@ -1095,13 +1146,14 @@
1095 </para> 1146 </para>
1096 1147
1097 <para> 1148 <para>
1098 Click the "OK" to save your plug-in configurations. 1149 Click the "Apply" and "OK" to save your plug-in
1150 configurations.
1099 </para> 1151 </para>
1100 </section> 1152 </section>
1101 </section> 1153 </section>
1102 </section> 1154 </section>
1103 1155
1104 <section id='creating-the-project'> 1156 <section id='neon-creating-the-project'>
1105 <title>Creating the Project</title> 1157 <title>Creating the Project</title>
1106 1158
1107 <para> 1159 <para>
@@ -1124,52 +1176,50 @@
1124 To create a project based on a Yocto template and then display 1176 To create a project based on a Yocto template and then display
1125 the source code, follow these steps: 1177 the source code, follow these steps:
1126 <orderedlist> 1178 <orderedlist>
1127 <listitem><para>Select "Project" from the "File -> New" menu. 1179 <listitem><para>Select "C Project" from the "File -> New" menu.
1128 </para></listitem>
1129 <listitem><para>Double click <filename>CC++</filename>.
1130 </para></listitem> 1180 </para></listitem>
1131 <listitem><para>Double click <filename>C Project</filename> 1181 <listitem><para>Expand <filename>Yocto Project SDK Autotools Project</filename>.
1132 to create the project.</para></listitem>
1133 <listitem><para>Expand <filename>Yocto Project ADT Autotools Project</filename>.
1134 </para></listitem> 1182 </para></listitem>
1135 <listitem><para>Select <filename>Hello World ANSI C Autotools Project</filename>. 1183 <listitem><para>Select <filename>Hello World ANSI C Autotools Projects</filename>.
1136 This is an Autotools-based project based on a Yocto 1184 This is an Autotools-based project based on a Yocto
1137 template.</para></listitem> 1185 template.
1186 </para></listitem>
1138 <listitem><para>Put a name in the <filename>Project name:</filename> 1187 <listitem><para>Put a name in the <filename>Project name:</filename>
1139 field. 1188 field.
1140 Do not use hyphens as part of the name. 1189 Do not use hyphens as part of the name
1190 (e.g. <filename>hello</filename>).
1191 </para></listitem>
1192 <listitem><para>Click "Next".
1141 </para></listitem> 1193 </para></listitem>
1142 <listitem><para>Click "Next".</para></listitem> 1194 <listitem><para>Add appropriate information in the various
1143 <listitem><para>Add information in the 1195 fields.
1144 <filename>Author</filename> and 1196 </para></listitem>
1145 <filename>Copyright notice</filename> fields. 1197 <listitem><para>Click "Finish".
1146 </para></listitem> 1198 </para></listitem>
1147 <listitem><para>Be sure the <filename>License</filename>
1148 field is correct.</para></listitem>
1149 <listitem><para>Click "Finish".</para></listitem>
1150 <listitem><para>If the "open perspective" prompt appears, 1199 <listitem><para>If the "open perspective" prompt appears,
1151 click "Yes" so that you in the C/C++ perspective. 1200 click "Yes" so that you in the C/C++ perspective.
1152 </para></listitem> 1201 </para></listitem>
1153 <listitem><para>The left-hand navigation pane shows your 1202 <listitem><para>The left-hand navigation pane shows your
1154 project. 1203 project.
1155 You can display your source by double clicking the 1204 You can display your source by double clicking the
1156 project's source file.</para></listitem> 1205 project's source file.
1206 </para></listitem>
1157 </orderedlist> 1207 </orderedlist>
1158 </para> 1208 </para>
1159 </section> 1209 </section>
1160 1210
1161 <section id='configuring-the-cross-toolchains'> 1211 <section id='neon-configuring-the-cross-toolchains'>
1162 <title>Configuring the Cross-Toolchains</title> 1212 <title>Configuring the Cross-Toolchains</title>
1163 1213
1164 <para> 1214 <para>
1165 The earlier section, 1215 The earlier section,
1166 "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>", 1216 "<link linkend='mars-configuring-the-eclipse-yocto-plug-in'>Configuring the Mars Eclipse Yocto Plug-in</link>",
1167 sets up the default project configurations. 1217 sets up the default project configurations.
1168 You can override these settings for a given project by following 1218 You can override these settings for a given project by following
1169 these steps: 1219 these steps:
1170 <orderedlist> 1220 <orderedlist>
1171 <listitem><para>Select "Change Yocto Project Settings" from 1221 <listitem><para>Select "Yocto Project Settings" from
1172 the "Project" menu. 1222 the "Project -> Properties" menu.
1173 This selection brings up the Yocto Project Settings 1223 This selection brings up the Yocto Project Settings
1174 Dialog and allows you to make changes specific to an 1224 Dialog and allows you to make changes specific to an
1175 individual project.</para> 1225 individual project.</para>
@@ -1177,12 +1227,12 @@
1177 Options for a project are inherited from settings you 1227 Options for a project are inherited from settings you
1178 provided using the Preferences Dialog as described 1228 provided using the Preferences Dialog as described
1179 earlier in the 1229 earlier in the
1180 "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>" section. 1230 "<link linkend='mars-configuring-the-eclipse-yocto-plug-in'>Configuring the Mars Eclipse Yocto Plug-in</link>" section.
1181 The Yocto Project Settings Dialog allows you to override 1231 The Yocto Project Settings Dialog allows you to override
1182 those default settings for a given project. 1232 those default settings for a given project.
1183 </para></listitem> 1233 </para></listitem>
1184 <listitem><para>Make your configurations for the project 1234 <listitem><para>Make or verify your configurations for the
1185 and click "OK". 1235 project and click "OK".
1186 </para></listitem> 1236 </para></listitem>
1187 <listitem><para>Right-click in the navigation pane and 1237 <listitem><para>Right-click in the navigation pane and
1188 select "Reconfigure Project" from the pop-up menu. 1238 select "Reconfigure Project" from the pop-up menu.
@@ -1202,20 +1252,20 @@
1202 </para> 1252 </para>
1203 </section> 1253 </section>
1204 1254
1205 <section id='building-the-project'> 1255 <section id='neon-building-the-project'>
1206 <title>Building the Project</title> 1256 <title>Building the Project</title>
1207 1257
1208 <para> 1258 <para>
1209 To build the project select "Build Project" from the 1259 To build the project select "Build All" from the
1210 "Project" menu. 1260 "Project" menu.
1211 The console should update and you can note the cross-compiler 1261 The console should update and you can note the cross-compiler
1212 you are using. 1262 you are using.
1213 <note> 1263 <note>
1214 When building "Yocto Project ADT Autotools" projects, the Eclipse 1264 When building "Yocto Project SDK Autotools" projects, the
1215 IDE might display error messages for Functions/Symbols/Types 1265 Eclipse IDE might display error messages for
1216 that cannot be "resolved", even when the related include file 1266 Functions/Symbols/Types that cannot be "resolved", even when
1217 is listed at the project navigator and when the project is 1267 the related include file is listed at the project navigator and
1218 able to build. 1268 when the project is able to build.
1219 For these cases only, it is recommended to add a new linked 1269 For these cases only, it is recommended to add a new linked
1220 folder to the appropriate sysroot. 1270 folder to the appropriate sysroot.
1221 Use these steps to add the linked folder: 1271 Use these steps to add the linked folder:
@@ -1247,7 +1297,7 @@
1247 </para> 1297 </para>
1248 </section> 1298 </section>
1249 1299
1250 <section id='starting-qemu-in-user-space-nfs-mode'> 1300 <section id='neon-starting-qemu-in-user-space-nfs-mode'>
1251 <title>Starting QEMU in User-Space NFS Mode</title> 1301 <title>Starting QEMU in User-Space NFS Mode</title>
1252 1302
1253 <para> 1303 <para>
@@ -1259,31 +1309,65 @@
1259 chapter in the Yocto Project Development Manual 1309 chapter in the Yocto Project Development Manual
1260 for more information on using QEMU. 1310 for more information on using QEMU.
1261 </note> 1311 </note>
1262 <orderedlist> 1312 <orderedlist>
1263 <listitem><para>Expose and select "External Tools" from 1313 <listitem><para>Expose and select "External Tools
1264 the "Run" menu. 1314 Configurations ..." from the "Run -> External Tools" menu.
1265 Your image should appear as a selectable menu item.
1266 </para></listitem> 1315 </para></listitem>
1267 <listitem><para>Select your image from the menu to launch 1316 <listitem><para>
1268 the emulator in a new window. 1317 Locate and select your image in the navigation panel to
1318 the left (e.g. <filename>qemu_i586-poky-linux</filename>).
1319 </para></listitem>
1320 <listitem><para>
1321 Click "Run" to launch QEMU.
1322 <note>
1323 The host on which you are running QEMU must have
1324 the <filename>rpcbind</filename> utility running to be
1325 able to make RPC calls on a server on that machine.
1326 If QEMU does not invoke and you receive error messages
1327 involving <filename>rpcbind</filename>, follow the
1328 suggestions to get the service running.
1329 As an example, on a new Ubuntu 16.04 LTS installation,
1330 you must do the following in order to get QEMU to
1331 launch:
1332 <literallayout class='monospaced'>
1333 $ sudo apt-get install rpcbind
1334 </literallayout>
1335 After installing <filename>rpcbind</filename>, you
1336 need to edit the
1337 <filename>/etc/init.d/rpcbind</filename> file to
1338 include the following line:
1339 <literallayout class='monospaced'>
1340 OPTIONS="-i -w"
1341 </literallayout>
1342 After modifying the file, you need to start the
1343 service:
1344 <literallayout class='monospaced'>
1345 $ sudo service portmap restart
1346 </literallayout>
1347 </note>
1269 </para></listitem> 1348 </para></listitem>
1270 <listitem><para>If needed, enter your host root password in 1349 <listitem><para>If needed, enter your host root password in
1271 the shell window at the prompt. 1350 the shell window at the prompt.
1272 This sets up a <filename>Tap 0</filename> connection 1351 This sets up a <filename>Tap 0</filename> connection
1273 needed for running in user-space NFS mode. 1352 needed for running in user-space NFS mode.
1274 </para></listitem> 1353 </para></listitem>
1275 <listitem><para>Wait for QEMU to launch.</para></listitem> 1354 <listitem><para>Wait for QEMU to launch.
1355 </para></listitem>
1276 <listitem><para>Once QEMU launches, you can begin operating 1356 <listitem><para>Once QEMU launches, you can begin operating
1277 within that environment. 1357 within that environment.
1278 One useful task at this point would be to determine the 1358 One useful task at this point would be to determine the
1279 IP Address for the user-space NFS by using the 1359 IP Address for the user-space NFS by using the
1280 <filename>ifconfig</filename> command. 1360 <filename>ifconfig</filename> command.
1281 </para></listitem> 1361 The IP address of the QEMU machine appears in the
1362 xterm window.
1363 You can use this address to help you see which particular
1364 IP address the instance of QEMU is using.
1365 </para></listitem>
1282 </orderedlist> 1366 </orderedlist>
1283 </para> 1367 </para>
1284 </section> 1368 </section>
1285 1369
1286 <section id='deploying-and-debugging-the-application'> 1370 <section id='neon-deploying-and-debugging-the-application'>
1287 <title>Deploying and Debugging the Application</title> 1371 <title>Deploying and Debugging the Application</title>
1288 1372
1289 <para> 1373 <para>
@@ -1299,7 +1383,11 @@
1299 that connection alive during your work. 1383 that connection alive during your work.
1300 For example, in a new terminal, run the following: 1384 For example, in a new terminal, run the following:
1301 <literallayout class='monospaced'> 1385 <literallayout class='monospaced'>
1302 ssh -XY user_name@remote_host_ip 1386 $ ssh -XY <replaceable>user_name</replaceable>@<replaceable>remote_host_ip</replaceable>
1387 </literallayout>
1388 Using the above form, here is an example:
1389 <literallayout class='monospaced'>
1390 $ ssh -XY root@192.168.7.2
1303 </literallayout> 1391 </literallayout>
1304 After running the command, add the command to be executed 1392 After running the command, add the command to be executed
1305 in Eclipse's run configuration before the application 1393 in Eclipse's run configuration before the application
@@ -1307,6 +1395,9 @@
1307 <literallayout class='monospaced'> 1395 <literallayout class='monospaced'>
1308 export DISPLAY=:10.0 1396 export DISPLAY=:10.0
1309 </literallayout> 1397 </literallayout>
1398 Be sure to not destroy the connection during your QEMU
1399 session (i.e. do not
1400 exit out of or close that shell).
1310 </note> 1401 </note>
1311 <orderedlist> 1402 <orderedlist>
1312 <listitem><para>Select "Debug Configurations..." from the 1403 <listitem><para>Select "Debug Configurations..." from the
@@ -1317,47 +1408,83 @@
1317 <listitem><para>Locate your project and select it to bring 1408 <listitem><para>Locate your project and select it to bring
1318 up a new tabbed view in the Debug Configurations Dialog. 1409 up a new tabbed view in the Debug Configurations Dialog.
1319 </para></listitem> 1410 </para></listitem>
1320 <listitem><para>Enter the absolute path into which you want
1321 to deploy the application.
1322 Use the "Remote Absolute File Path for
1323 C/C++Application:" field.
1324 For example, enter
1325 <filename>/usr/bin/<replaceable>programname</replaceable></filename>.
1326 </para></listitem>
1327 <listitem><para>Click on the "Debugger" tab to see the 1411 <listitem><para>Click on the "Debugger" tab to see the
1328 cross-tool debugger you are using.</para></listitem> 1412 cross-tool debugger you are using.
1329 <listitem><para>Click on the "Main" tab.</para></listitem> 1413 Be sure to change to the debugger perspective in Eclipse.
1414 </para></listitem>
1415 <listitem><para>Click on the "Main" tab.
1416 </para></listitem>
1330 <listitem><para>Create a new connection to the QEMU instance 1417 <listitem><para>Create a new connection to the QEMU instance
1331 by clicking on "new".</para></listitem> 1418 by clicking on "new".</para></listitem>
1332 <listitem><para>Select <filename>TCF</filename>, which means 1419 <listitem><para>Select <filename>SSH</filename>, which means
1333 Target Communication Framework.</para></listitem> 1420 Secure Socket Shell and then click "OK".
1334 <listitem><para>Click "Next".</para></listitem> 1421 Optionally, you can select an TCF connection instead.
1335 <listitem><para>Clear out the "host name" field and enter 1422 </para></listitem>
1336 the IP Address determined earlier.</para></listitem> 1423 <listitem><para>Clear out the "Connection name" field and enter
1424 the IP Address determined earlier (e.g. 192.168.7.2).
1425 </para></listitem>
1426 <listitem><para>Put the IP address for the connection in
1427 "Host" field.
1428 </para></listitem>
1429 <listitem><para>Provide <filename>root</filename> for the
1430 "User" field.
1431 </para></listitem>
1337 <listitem><para>Click "Finish" to close the 1432 <listitem><para>Click "Finish" to close the
1338 New Connections Dialog.</para></listitem> 1433 New Connections Dialog.
1339 <listitem><para>Use the drop-down menu now in the 1434 </para></listitem>
1435 <listitem><para>If necessary, use the drop-down menu now in the
1340 "Connection" field and pick the IP Address you entered. 1436 "Connection" field and pick the IP Address you entered.
1341 </para></listitem> 1437 </para></listitem>
1342 <listitem><para>Click "Debug" to bring up a login screen 1438 <listitem><para>Assuming you are connecting as the root
1343 and login.</para></listitem> 1439 user, which is the default for QEMU x86-64 SDK images
1440 provided by the Yocto Project, in the "Remote Absolute
1441 File Path for C/C++ Application" field, browse to
1442 <filename>/home/root/</filename><replaceable>ProjectName</replaceable>
1443 (e.g. <filename>/home/root/hello</filename>).
1444 You could also browse to any other path you have write
1445 access to on the target such as
1446 <filename>/usr/bin</filename>.
1447 This location is where your application will be located
1448 on the QEMU system.
1449 If you fail to browse to and specify an appropriate
1450 location, QEMU will not understand what to remotely
1451 launch.
1452 Eclipse is helpful in that it auto fills your
1453 application name for you assuming you browsed to a
1454 directory.
1455 <note>
1456 If you are prompted to provide a username and to
1457 optionally set a password, be sure you provide
1458 "root" as the username and you leave the password
1459 field blank.
1460 </note>
1461 </para></listitem>
1462 <listitem><para>
1463 Be sure you change to the "Debug" perspective in
1464 Eclipse.
1465 </para></listitem>
1466 <listitem><para>Click "Debug"
1467 </para></listitem>
1344 <listitem><para>Accept the debug perspective. 1468 <listitem><para>Accept the debug perspective.
1345 </para></listitem> 1469 </para></listitem>
1346 </orderedlist> 1470 </orderedlist>
1347 </para> 1471 </para>
1348 </section> 1472 </section>
1349 1473
1350 <section id='running-performance-tools'> 1474 <section id='neon-using-Linuxtools'>
1351 <title>Running Performance Tools</title> 1475 <title>Using Linuxtools</title>
1476
1477 <para>
1478 As mentioned earlier in the manual, performance tools exist
1479 (Linuxtools) that enhance your development experience.
1480 These tools are aids in developing and debugging applications and
1481 images.
1482 You can run these tools from within the Eclipse IDE through the
1483 "Linuxtools" menu.
1484 </para>
1352 1485
1353 <para> 1486 <para>
1354 As mentioned earlier in the manual, several tools exist that 1487 For information on how to configure and use these tools, see
1355 enhance your development experience.
1356 These tools are aids in developing and debugging applications
1357 and images.
1358 You can run these tools from within the Eclipse
1359 IDE through the "YoctoProjectTools" menu.
1360 For more information on these tools, see
1361 <ulink url='http://www.eclipse.org/linuxtools/'>http://www.eclipse.org/linuxtools/</ulink>. 1488 <ulink url='http://www.eclipse.org/linuxtools/'>http://www.eclipse.org/linuxtools/</ulink>.
1362 </para> 1489 </para>
1363 </section> 1490 </section>