ref-manual: remove 'ref' from filenames

All filenames duplicate the 'manual name', which is not needed, and
make all references longer than they should. Rename all files to be as
consise as possible, and fix all references

(From yocto-docs rev: bb7e4783f45a5f67e6e4b39968f3512f43738833)

Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

20 files changed, 39 insertions, 39 deletions

diff --git a/documentation/ref-manual/ref-classes.rst b/documentation/ref-manual/classes.rst
index 37ab4992eb..5a30ce379b 100644
--- a/documentation/ref-manual/ref-classes.rst
+++ b/documentation/ref-manual/classes.rst
@@ -1033,7 +1033,7 @@ You can configure the sanity checks so that specific test failures
 either raise a warning or an error message. Typically, failures for new
 tests generate a warning. Subsequent failures for the same test would
 then generate an error message once the metadata is in a known and good
-condition. See the ":doc:`ref-qa-checks`" Chapter for a list of all the warning
+condition. See the ":doc:`/ref-manual/qa-checks`" Chapter for a list of all the warning
 and error messages you might encounter using a default configuration.
 
 Use the :term:`WARN_QA` and
@@ -1276,7 +1276,7 @@ The following list shows the tests you can list with the ``WARN_QA`` and
 -  ``textrel:`` Checks for ELF binaries that contain relocations in
    their ``.text`` sections, which can result in a performance impact at
    runtime. See the explanation for the ``ELF binary`` message in
-   ":doc:`ref-qa-checks`" for more information regarding runtime performance
+   ":doc:`/ref-manual/qa-checks`" for more information regarding runtime performance
    issues.
 
 -  ``unlisted-pkg-lics:`` Checks that all declared licenses applying
diff --git a/documentation/ref-manual/ref-devtool-reference.rst b/documentation/ref-manual/devtool-reference.rst
index 2b97bb4605..cc5848fd4d 100644
--- a/documentation/ref-manual/ref-devtool-reference.rst
+++ b/documentation/ref-manual/devtool-reference.rst
@@ -193,7 +193,7 @@ external source tree.
    run your application. If dependent packages (e.g. libraries) do not
    exist on the target, your application, when run, will fail to find
    those functions. For more information, see the
-   ":ref:`ref-manual/ref-devtool-reference:deploying your software on the target machine`"
+   ":ref:`ref-manual/devtool-reference:deploying your software on the target machine`"
    section.
 
 By default, ``devtool add`` uses the latest revision (i.e. master) when
@@ -561,7 +561,7 @@ Removing Your Software from the Target Machine
 Use the ``devtool undeploy-target`` command to remove deployed build
 output from the target machine. For the ``devtool undeploy-target``
 command to work, you must have previously used the
-":ref:`devtool deploy-target <ref-manual/ref-devtool-reference:deploying your software on the target machine>`"
+":ref:`devtool deploy-target <ref-manual/devtool-reference:deploying your software on the target machine>`"
 command.
 ::
 
@@ -609,7 +609,7 @@ The ``devtool status`` command has no command-line options:
    $ devtool status
 
 Following is sample output after using
-:ref:`devtool add <ref-manual/ref-devtool-reference:adding a new recipe to the workspace layer>`
+:ref:`devtool add <ref-manual/devtool-reference:adding a new recipe to the workspace layer>`
 to create and add the ``mtr_0.86.bb`` recipe to the ``workspace`` directory:
 ::
 
diff --git a/documentation/ref-manual/faq.rst b/documentation/ref-manual/faq.rst
index cc6b3aee1b..f67c53824b 100644
--- a/documentation/ref-manual/faq.rst
+++ b/documentation/ref-manual/faq.rst
@@ -22,7 +22,7 @@ Can I still use the Yocto Project?
 **A:** You can get the required tools on your host development system a
 couple different ways (i.e. building a tarball or downloading a
 tarball). See the
-":ref:`ref-manual/ref-system-requirements:required git, tar, python and gcc versions`"
+":ref:`ref-manual/system-requirements:required git, tar, python and gcc versions`"
 section for steps on how to update your build tools.
 
 **Q:** How can you claim Poky / OpenEmbedded-Core is stable?
diff --git a/documentation/ref-manual/ref-features.rst b/documentation/ref-manual/features.rst
index 89c06eb65f..89c06eb65f 100644
--- a/documentation/ref-manual/ref-features.rst
+++ b/documentation/ref-manual/features.rst
diff --git a/documentation/ref-manual/ref-images.rst b/documentation/ref-manual/images.rst
index 5e9374eae7..5e9374eae7 100644
--- a/documentation/ref-manual/ref-images.rst
+++ b/documentation/ref-manual/images.rst
diff --git a/documentation/ref-manual/index.rst b/documentation/ref-manual/index.rst
index 033f4ba28c..deb0383cfc 100644
--- a/documentation/ref-manual/index.rst
+++ b/documentation/ref-manual/index.rst
@@ -10,20 +10,20 @@ Yocto Project Reference Manual
    :caption: Table of Contents
    :numbered:
 
-   ref-system-requirements
-   ref-terms
-   ref-release-process
+   system-requirements
+   terms
+   release-process
    migration
-   ref-structure
-   ref-classes
-   ref-tasks
-   ref-devtool-reference
-   ref-kickstart
-   ref-qa-checks
-   ref-images
-   ref-features
-   ref-variables
-   ref-varlocality
+   structure
+   classes
+   tasks
+   devtool-reference
+   kickstart
+   qa-checks
+   images
+   features
+   variables
+   varlocality
    faq
    resources
    history
diff --git a/documentation/ref-manual/ref-kickstart.rst b/documentation/ref-manual/kickstart.rst
index bb9c0460f3..bb9c0460f3 100644
--- a/documentation/ref-manual/ref-kickstart.rst
+++ b/documentation/ref-manual/kickstart.rst
diff --git a/documentation/ref-manual/migration-1.5.rst b/documentation/ref-manual/migration-1.5.rst
index b5e4bb1fd1..2716bc9cfd 100644
--- a/documentation/ref-manual/migration-1.5.rst
+++ b/documentation/ref-manual/migration-1.5.rst
@@ -26,7 +26,7 @@ provide packages for these, you can install and use the Buildtools
 tarball, which provides an SDK-like environment containing them.
 
 For more information on this requirement, see the
-":ref:`ref-manual/ref-system-requirements:required git, tar, python and gcc versions`"
+":ref:`ref-manual/system-requirements:required git, tar, python and gcc versions`"
 section.
 
 .. _migration-1.5-atom-pc-bsp:
diff --git a/documentation/ref-manual/migration-1.6.rst b/documentation/ref-manual/migration-1.6.rst
index f95f45ec9f..ed155d0df9 100644
--- a/documentation/ref-manual/migration-1.6.rst
+++ b/documentation/ref-manual/migration-1.6.rst
@@ -126,7 +126,7 @@ Changes to Variables
 --------------------
 
 The following variables have changed. For information on the
-OpenEmbedded build system variables, see the ":doc:`ref-variables`" Chapter.
+OpenEmbedded build system variables, see the ":doc:`/ref-manual/variables`" Chapter.
 
 .. _migration-1.6-variable-changes-TMPDIR:
 
diff --git a/documentation/ref-manual/migration-1.7.rst b/documentation/ref-manual/migration-1.7.rst
index 177d40900f..19275b3cd6 100644
--- a/documentation/ref-manual/migration-1.7.rst
+++ b/documentation/ref-manual/migration-1.7.rst
@@ -32,7 +32,7 @@ build host is now 1.7.8 because the ``--list`` option is now required by
 BitBake's Git fetcher. As always, if your host distribution does not
 provide a version of Git that meets this requirement, you can use the
 ``buildtools-tarball`` that does. See the
-":ref:`ref-manual/ref-system-requirements:required git, tar, python and gcc versions`"
+":ref:`ref-manual/system-requirements:required git, tar, python and gcc versions`"
 section for more information.
 
 .. _migration-1.7-autotools-class-changes:
@@ -157,7 +157,7 @@ The following changes have occurred to the QA check process:
    added in order to verify that file dependencies are satisfied (e.g.
    package contains a script requiring ``/bin/bash``) and build-time
    dependencies are declared, respectively. For more information, please
-   see the ":doc:`ref-qa-checks`" chapter.
+   see the ":doc:`/ref-manual/qa-checks`" chapter.
 
 -  Package QA checks are now performed during a new
    :ref:`ref-tasks-package_qa` task rather than being
diff --git a/documentation/ref-manual/migration-2.1.rst b/documentation/ref-manual/migration-2.1.rst
index a1d7b9a2da..e8b3ada264 100644
--- a/documentation/ref-manual/migration-2.1.rst
+++ b/documentation/ref-manual/migration-2.1.rst
@@ -360,7 +360,7 @@ These additional changes exist:
 -  The minimum Git version has been increased to 1.8.3.1. If your host
    distribution does not provide a sufficiently recent version, you can
    install the buildtools, which will provide it. See the
-   :ref:`ref-manual/ref-system-requirements:required git, tar, python and gcc versions`
+   :ref:`ref-manual/system-requirements:required git, tar, python and gcc versions`
    section for more information on the buildtools tarball.
 
 -  The buggy and incomplete support for the RPM version 4 package
diff --git a/documentation/ref-manual/migration-2.3.rst b/documentation/ref-manual/migration-2.3.rst
index 6984ff91e8..3e9758119b 100644
--- a/documentation/ref-manual/migration-2.3.rst
+++ b/documentation/ref-manual/migration-2.3.rst
@@ -404,7 +404,7 @@ The following QA checks have changed:
 
    For additional information, see the
    :ref:`insane <ref-classes-insane>` class and the
-   ":ref:`ref-manual/ref-qa-checks:errors and warnings`" section.
+   ":ref:`ref-manual/qa-checks:errors and warnings`" section.
 
 .. _migration-2.3-miscellaneous-changes:
 
diff --git a/documentation/ref-manual/ref-qa-checks.rst b/documentation/ref-manual/qa-checks.rst
index 54977dcb21..54977dcb21 100644
--- a/documentation/ref-manual/ref-qa-checks.rst
+++ b/documentation/ref-manual/qa-checks.rst
diff --git a/documentation/ref-manual/ref-release-process.rst b/documentation/ref-manual/release-process.rst
index 20be09a4ff..d8d362282b 100644
--- a/documentation/ref-manual/ref-release-process.rst
+++ b/documentation/ref-manual/release-process.rst
@@ -146,7 +146,7 @@ consists of the following pieces:
    .. note::
 
       Running ``oe-selftest`` requires host packages beyond the "Essential"
-      grouping. See the :ref:`ref-manual/ref-system-requirements:required packages for the build host`
+      grouping. See the :ref:`ref-manual/system-requirements:required packages for the build host`
       section for more information.
 
 Originally, much of this testing was done manually. However, significant
diff --git a/documentation/ref-manual/ref-structure.rst b/documentation/ref-manual/structure.rst
index ab9075b9c5..ad3f4ab44a 100644
--- a/documentation/ref-manual/ref-structure.rst
+++ b/documentation/ref-manual/structure.rst
@@ -682,7 +682,7 @@ generation or packaging also have their specific class files such as
 ``image.bbclass``, ``rootfs_*.bbclass`` and ``package*.bbclass``.
 
 For reference information on classes, see the
-":ref:`ref-manual/ref-classes:Classes`" chapter.
+":ref:`ref-manual/classes:Classes`" chapter.
 
 .. _structure-meta-conf:
 
diff --git a/documentation/ref-manual/ref-system-requirements.rst b/documentation/ref-manual/system-requirements.rst
index 66afb08102..66afb08102 100644
--- a/documentation/ref-manual/ref-system-requirements.rst
+++ b/documentation/ref-manual/system-requirements.rst
diff --git a/documentation/ref-manual/ref-tasks.rst b/documentation/ref-manual/tasks.rst
index 8b9e0c2d89..9fe1c296aa 100644
--- a/documentation/ref-manual/ref-tasks.rst
+++ b/documentation/ref-manual/tasks.rst
@@ -461,7 +461,7 @@ devtool commands:
    $ devtool latest-version
    $ devtool check-upgrade-status
 
-See the ":ref:`ref-manual/ref-devtool-reference:\`\`devtool\`\` quick reference`"
+See the ":ref:`ref-manual/devtool-reference:\`\`devtool\`\` quick reference`"
 chapter for more information on
 ``devtool``. See the ":ref:`devtool-checking-on-the-upgrade-status-of-a-recipe`"
 section for information on checking the upgrade status of a recipe.
diff --git a/documentation/ref-manual/ref-terms.rst b/documentation/ref-manual/terms.rst
index f41073602d..c07dd4b128 100644
--- a/documentation/ref-manual/ref-terms.rst
+++ b/documentation/ref-manual/terms.rst
@@ -64,7 +64,7 @@ universal, the list includes them just in case:
       This term refers to the area used by the OpenEmbedded build system for
       builds. The area is created when you ``source`` the setup environment
       script that is found in the Source Directory
-      (i.e. :ref:`ref-manual/ref-structure:\`\`oe-init-build-env\`\``). The
+      (i.e. :ref:`ref-manual/structure:\`\`oe-init-build-env\`\``). The
       :term:`TOPDIR` variable points to the Build Directory.
 
       You have a lot of flexibility when creating the Build Directory.
@@ -117,7 +117,7 @@ universal, the list includes them just in case:
       Files that provide for logic encapsulation and inheritance so that
       commonly used patterns can be defined once and then easily used in
       multiple recipes. For reference information on the Yocto Project classes,
-      see the ":ref:`ref-manual/ref-classes:Classes`" chapter. Class files end with the
+      see the ":ref:`ref-manual/classes:Classes`" chapter. Class files end with the
       ``.bbclass`` filename extension.
 
    :term:`Configuration File`
@@ -177,7 +177,7 @@ universal, the list includes them just in case:
       recipes and related Metadata. Images are the binary output that run on
       specific hardware or QEMU and are used for specific use-cases. For a list
       of the supported image types that the Yocto Project provides, see the
-      ":ref:`ref-manual/ref-images:Images`" chapter.
+      ":ref:`ref-manual/images:Images`" chapter.
 
    :term:`Layer`
       A collection of related recipes. Layers allow you to consolidate related
@@ -252,7 +252,7 @@ universal, the list includes them just in case:
 
       It is worth noting that the term "package" can, in general, have
       subtle meanings. For example, the packages referred to in the
-      ":ref:`ref-manual/ref-system-requirements:required packages for the build host`"
+      ":ref:`ref-manual/system-requirements:required packages for the build host`"
       section are compiled binaries that, when installed, add functionality to
       your Linux distribution.
 
diff --git a/documentation/ref-manual/ref-variables.rst b/documentation/ref-manual/variables.rst
index 865d17c1fc..8c6cc46b6c 100644
--- a/documentation/ref-manual/ref-variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -1670,7 +1670,7 @@ system and gives an overview of their function and contents.
       ``${TMPDIR}/deploy``.
 
       For more information on the structure of the Build Directory, see
-      ":ref:`ref-manual/ref-structure:the build directory - \`\`build/\`\``" section.
+      ":ref:`ref-manual/structure:the build directory - \`\`build/\`\``" section.
       For more detail on the contents of the ``deploy`` directory, see the
       ":ref:`overview-manual/concepts:images`",
       ":ref:`overview-manual/concepts:package feeds`", and
@@ -1708,7 +1708,7 @@ system and gives an overview of their function and contents.
       ``${DEPLOY_DIR}/images/${MACHINE}/``.
 
       For more information on the structure of the Build Directory, see
-      ":ref:`ref-manual/ref-structure:the build directory - \`\`build/\`\``" section.
+      ":ref:`ref-manual/structure:the build directory - \`\`build/\`\``" section.
       For more detail on the contents of the ``deploy`` directory, see the
       ":ref:`overview-manual/concepts:images`" and
       ":ref:`overview-manual/concepts:application development sdk`" sections both in
@@ -2907,7 +2907,7 @@ system and gives an overview of their function and contents.
       ":ref:`dev-manual/common-tasks:creating partitioned images using wic`"
       section of the Yocto Project Development Tasks Manual. Reference
       material for Wic is located in the
-      ":doc:`/ref-manual/ref-kickstart`" chapter.
+      ":doc:`/ref-manual/kickstart`" chapter.
 
    :term:`IMAGE_BOOT_FILES`
       A space-separated list of files installed into the boot partition
@@ -2943,7 +2943,7 @@ system and gives an overview of their function and contents.
       ":ref:`dev-manual/common-tasks:creating partitioned images using wic`"
       section of the Yocto Project Development Tasks Manual. Reference
       material for Wic is located in the
-      ":doc:`/ref-manual/ref-kickstart`" chapter.
+      ":doc:`/ref-manual/kickstart`" chapter.
 
    :term:`IMAGE_CLASSES`
       A list of classes that all images should inherit. You typically use
@@ -3051,7 +3051,7 @@ system and gives an overview of their function and contents.
       .. note::
 
          -  When working with a
-            :ref:`core-image-minimal-initramfs <ref-manual/ref-images:images>`
+            :ref:`core-image-minimal-initramfs <ref-manual/images:images>`
             image, do not use the ``IMAGE_INSTALL`` variable to specify
             packages for installation. Instead, use the
             :term:`PACKAGE_INSTALL` variable, which
@@ -5240,7 +5240,7 @@ system and gives an overview of their function and contents.
       general, you should use the
       :term:`IMAGE_INSTALL` variable to specify
       packages for installation. The exception to this is when working with
-      the :ref:`core-image-minimal-initramfs <ref-manual/ref-images:images>`
+      the :ref:`core-image-minimal-initramfs <ref-manual/images:images>`
       image. When working with an initial RAM filesystem (initramfs) image,
       use the ``PACKAGE_INSTALL`` variable. For information on creating an
       initramfs, see the ":ref:`dev-manual/common-tasks:building an initial ram filesystem (initramfs) image`" section
@@ -8737,7 +8737,7 @@ system and gives an overview of their function and contents.
       image, see the
       ":ref:`dev-manual/common-tasks:creating partitioned images using wic`"
       section in the Yocto Project Development Tasks Manual. For details on
-      the kickstart file format, see the ":doc:`/ref-manual/ref-kickstart`" Chapter.
+      the kickstart file format, see the ":doc:`/ref-manual/kickstart`" Chapter.
 
    :term:`WKS_FILE_DEPENDS`
       When placed in the recipe that builds your image, this variable lists
diff --git a/documentation/ref-manual/ref-varlocality.rst b/documentation/ref-manual/varlocality.rst
index 5f7dba8775..5f7dba8775 100644
--- a/documentation/ref-manual/ref-varlocality.rst
+++ b/documentation/ref-manual/varlocality.rst