ref-manual: Updated the "Image Features" section.

The list of features in the section was out of sync with the list
of features shown in the comments of the core-image class.
Additionally, four of the features are available to all images
regardless of whether or not the core-image class is inherited.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: e4821fd0a63e906da8b1ff015fb4970e5e62d667)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

1 files changed, 115 insertions, 48 deletions

diff --git a/documentation/ref-manual/ref-features.xml b/documentation/ref-manual/ref-features.xml
index 242dfe0737..cc4f3456c1 100644
--- a/documentation/ref-manual/ref-features.xml
+++ b/documentation/ref-manual/ref-features.xml
@@ -207,51 +207,109 @@
         <title>Image Features</title>
 
         <para>
-            The contents of images generated by the OpenEmbedded build system can be controlled by the
-            <filename><link linkend='var-IMAGE_FEATURES'>IMAGE_FEATURES</link></filename>
-            and <filename><link linkend='var-EXTRA_IMAGE_FEATURES'>EXTRA_IMAGE_FEATURES</link></filename>
+            The contents of images generated by the OpenEmbedded build system
+            can be controlled by the
+            <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link>
+            and
+            <link linkend='var-EXTRA_IMAGE_FEATURES'><filename>EXTRA_IMAGE_FEATURES</filename></link>
             variables that you typically configure in your image recipes.
             Through these variables, you can add several different
-            predefined packages such as development utilities or packages with debug
-            information needed to investigate application problems or profile applications.
+            predefined packages such as development utilities or packages with
+            debug information needed to investigate application problems or
+            profile applications.
         </para>
 
         <para>
-            Current list of
-            <filename>IMAGE_FEATURES</filename> contains the following:
+            The bulk of image features are available only when you inherit the
+            <link linkend='ref-classes-core-image'><filename>core-image</filename></link>
+            class.
+            However, some features, as noted in the following list, are
+            available to all images.
+            The current list of valid <filename>IMAGE_FEATURES</filename>
+            is as follows:
             <itemizedlist>
-                <listitem><para><emphasis>dbg-pkgs:</emphasis> Installs debug symbol packages for all packages
-                    installed in a given image.</para></listitem>
-                <listitem><para><emphasis>dev-pkgs:</emphasis> Installs development packages (headers and
-                    extra library links) for all packages installed in a given image.</para></listitem>
-                <listitem><para><emphasis>doc-pkgs:</emphasis> Installs documentation packages for all packages
-                    installed in a given image.</para></listitem>
-                <listitem><para><emphasis>nfs-server:</emphasis> Installs an NFS server.</para></listitem>
-                <listitem><para><emphasis>read-only-rootfs:</emphasis> Creates
-                    an image whose root filesystem is read-only.
+                <listitem><para><emphasis>dbg-pkgs:</emphasis>
+                    Installs debug symbol packages for all packages installed
+                    in a given image.
+                    </para></listitem>
+                <listitem><para><emphasis>dbg-tweaks:</emphasis>
+                    Makes an image suitable for development (e.g.
+                    allows root logins without passwords).
+                    The <filename>dbg-tweaks</filename> feature is
+                    available for all images regardless of whether or not
+                    the <filename>core-image</filename> class is inherited.
+                    </para></listitem>
+                <listitem><para><emphasis>dev-pkgs:</emphasis>
+                    Installs development packages (headers and extra library
+                    links) for all packages installed in a given image.
+                    </para></listitem>
+                <listitem><para><emphasis>doc-pkgs:</emphasis> Installs
+                    documentation packages for all packages installed in a
+                    given image.
+                    </para></listitem>
+                <listitem><para><emphasis>eclipse-debug:</emphasis> Provides
+                    Eclipse remote debugging support.
+                    </para></listitem>
+                <listitem><para><emphasis>hwcodecs:</emphasis> Installs
+                    hardware acceleration codecs.
+                    </para></listitem>
+                <listitem><para><emphasis>nfs-server:</emphasis>
+                    Installs an NFS server.
+                    </para></listitem>
+                <listitem><para><emphasis>package-management:</emphasis>
+                    Installs package management tools and preserves the package
+                    manager database.
+                    The <filename>package-management</filename> feature is
+                    available for all images regardless of whether or not
+                    the <filename>core-image</filename> class is inherited.
+                    </para></listitem>
+                <listitem><para><emphasis>ptest-pkgs:</emphasis>
+                    Installs ptest packages for all ptest-enabled recipes.
+                    </para></listitem>
+                <listitem><para><emphasis>qt4-pkgs:</emphasis>
+                    Supports Qt4/X11 and demo applications.
+                    </para></listitem>
+                <listitem><para><emphasis>read-only-rootfs:</emphasis>
+                    Creates an image whose root filesystem is read-only.
                     See the
                     "<ulink url='&YOCTO_DOCS_DEV_URL;#creating-a-read-only-root-filesystem'>Creating a Read-Only Root Filesystem</ulink>"
                     section in the Yocto Project Development Manual for more
-                    information.</para></listitem>
-                <listitem><para><emphasis>splash:</emphasis> Enables showing a splash screen during boot.
-                    By default, this screen is provided by <filename>psplash</filename>, which does
-                    allow customization.
-                    If you prefer to use an alternative splash screen package, you can do so by
-                    setting the <filename>SPLASH</filename> variable
-                    to a different package name (or names) within the image recipe or at the distro
-                    configuration level.</para></listitem>
-                <listitem><para><emphasis>ssh-server-dropbear:</emphasis> Installs the Dropbear minimal
-                    SSH server.
-                    </para></listitem>
-                <listitem><para><emphasis>ssh-server-openssh:</emphasis> Installs the OpenSSH SSH server,
-                    which is more full-featured than Dropbear.
-                    Note that if both the OpenSSH SSH server and the Dropbear minimal SSH server
-                    are present in <filename>IMAGE_FEATURES</filename>, then OpenSSH will take
-                    precedence and Dropbear will not be installed.</para></listitem>
-                <listitem><para><emphasis>staticdev-pkgs:</emphasis> Installs static development
-                    packages (i.e. static libraries containing <filename>*.a</filename> files) for all
-                    packages installed in a given image.</para></listitem>
-                <listitem><para><emphasis>tools-debug:</emphasis> Installs debugging tools such as
+                    information.
+                    The <filename>read-only-rootfs</filename> feature is
+                    available for all images regardless of whether or not
+                    the <filename>core-image</filename> class is inherited.
+                    </para></listitem>
+                <listitem><para><emphasis>splash:</emphasis>
+                    Enables showing a splash screen during boot.
+                    By default, this screen is provided by
+                    <filename>psplash</filename>, which does allow
+                    customization.
+                    If you prefer to use an alternative splash screen package,
+                    you can do so by setting the <filename>SPLASH</filename>
+                    variable to a different package name (or names) within the
+                    image recipe or at the distro configuration level.
+                    The <filename>splash</filename> feature is
+                    available for all images regardless of whether or not
+                    the <filename>core-image</filename> class is inherited.
+                    </para></listitem>
+                <listitem><para><emphasis>ssh-server-dropbear:</emphasis>
+                    Installs the Dropbear minimal SSH server.
+                    </para></listitem>
+                <listitem><para><emphasis>ssh-server-openssh:</emphasis>
+                    Installs the OpenSSH SSH server, which is more
+                    full-featured than Dropbear.
+                    Note that if both the OpenSSH SSH server and the Dropbear
+                    minimal SSH server are present in
+                    <filename>IMAGE_FEATURES</filename>, then OpenSSH will take
+                    precedence and Dropbear will not be installed.
+                    </para></listitem>
+                <listitem><para><emphasis>staticdev-pkgs:</emphasis>
+                    Installs static development packages (i.e. static
+                    libraries containing <filename>*.a</filename> files) for
+                    all packages installed in a given image.
+                    </para></listitem>
+                <listitem><para><emphasis>tools-debug:</emphasis>
+                    Installs debugging tools such as
                     <filename>strace</filename> and <filename>gdb</filename>.
                     For information on GDB, see the
                     "<ulink url='&YOCTO_DOCS_DEV_URL;#platdev-gdb-remotedebug'>Debugging With the GNU Project Debugger (GDB) Remotely</ulink>"
@@ -259,20 +317,29 @@
                     For information on tracing and profiling, see the
                     <ulink url='&YOCTO_DOCS_PROF_URL;'>Yocto Project Profiling and Tracing Manual</ulink>.
                     </para></listitem>
-                <listitem><para><emphasis>tools-profile:</emphasis> Installs profiling tools such as
-                    <filename>oprofile</filename>, <filename>exmap</filename>, and
-                    <filename>LTTng</filename>.
+                <listitem><para><emphasis>tools-profile:</emphasis>
+                    Installs profiling tools such as
+                    <filename>oprofile</filename>, <filename>exmap</filename>,
+                    and <filename>LTTng</filename>.
                     For general information on user-space tools, see the
                     "<ulink url='&YOCTO_DOCS_ADT_URL;#user-space-tools'>User-Space Tools</ulink>"
-                    section in the Yocto Project Application Developer's Guide.</para></listitem>
-                <listitem><para><emphasis>tools-sdk:</emphasis> Installs a full SDK that runs on the device.
-                    </para></listitem>
-                <listitem><para><emphasis>tools-testapps:</emphasis> Installs device testing tools (e.g.
-                    touchscreen debugging).</para></listitem>
-                <listitem><para><emphasis>x11:</emphasis> Installs the X server</para></listitem>
-                <listitem><para><emphasis>x11-base:</emphasis> Installs the X server with a
-                    minimal environment.</para></listitem>
-                <listitem><para><emphasis>x11-sato:</emphasis> Installs the OpenedHand Sato environment.
+                    section in the Yocto Project Application Developer's
+                    Guide.
+                    </para></listitem>
+                <listitem><para><emphasis>tools-sdk:</emphasis>
+                    Installs a full SDK that runs on the device.
+                    </para></listitem>
+                <listitem><para><emphasis>tools-testapps:</emphasis>
+                    Installs device testing tools (e.g. touchscreen debugging).
+                    </para></listitem>
+                <listitem><para><emphasis>x11:</emphasis>
+                    Installs the X server.
+                    </para></listitem>
+                <listitem><para><emphasis>x11-base:</emphasis>
+                    Installs the X server with a minimal environment.
+                    </para></listitem>
+                <listitem><para><emphasis>x11-sato:</emphasis>
+                    Installs the OpenedHand Sato environment.
                     </para></listitem>
             </itemizedlist>
         </para>