documentation: Changed all manual links to point to "latest"

There are many references to YP documentation throughout the
YP manual set.  They used to have hard-coded links to the
current release (e.g. yoctoproject.org/docs/1.1 for Edison).
This created a situation where if you went to a document on
the website and clicked on a external reference to another
manual, you would redirect to the current manual on the website.
Really, you would want to go to the latest manual, which is
one that is under development.  Changing the links to
"yoctoproject.org/docs/latest" makes the tip of master, which
is used for devloping the next release, always have references
to the manuals being developed and not back to the stable
released set of manuals.

This "latest" and "current" scheme for the links is not perfect.
What has to happen when the latest set of the manuals freezes
and becomes the next stable release, all the links in the docs
will need to be changed from "latest" in the URL to the new
release number.  So for example, all the "latest" occurences
would need to be changed to "1.2".  Then for the next cycle
as development begins again, the links need to be infused with
"latest" again.

(From yocto-docs rev: a234aef34303b07671da956de0e94b352797143e)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

6 files changed, 43 insertions, 43 deletions

diff --git a/documentation/dev-manual/dev-manual-bsp-appendix.xml b/documentation/dev-manual/dev-manual-bsp-appendix.xml
index ed3af67284..7b8dc6ead5 100644
--- a/documentation/dev-manual/dev-manual-bsp-appendix.xml
+++ b/documentation/dev-manual/dev-manual-bsp-appendix.xml
@@ -238,8 +238,8 @@
             <filename>meta-mymachine/conf/layer.conf</filename>.
             This file identifies build information needed for the new layer.  
             You can see the 
-            "<ulink url='http://www.yoctoproject.org/docs/1.1/bsp-guide/bsp-guide.html#bsp-filelayout-layer'>Layer Configuration File</ulink>" section in  
-            <ulink url='http://www.yoctoproject.org/docs/1.1/bsp-guide/bsp-guide.html'>The Board 
+            "<ulink url='http://www.yoctoproject.org/docs/latest/bsp-guide/bsp-guide.html#bsp-filelayout-layer'>Layer Configuration File</ulink>" section in  
+            <ulink url='http://www.yoctoproject.org/docs/latest/bsp-guide/bsp-guide.html'>The Board 
             Support Packages (BSP) Development Guide</ulink>
             for more information on this configuration file.  
             Basically, we are changing the existing statements to work with our BSP. 
@@ -578,7 +578,7 @@
 
     <para>
         The appendix 
-        <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-variables-glos'>
+        <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html#ref-variables-glos'>
         Reference: Variables Glossary</ulink> in the Yocto Project Reference Manual has more information 
          on configuration variables.
     </para>
diff --git a/documentation/dev-manual/dev-manual-intro.xml b/documentation/dev-manual/dev-manual-intro.xml
index 3d1b76a004..85eea519ff 100644
--- a/documentation/dev-manual/dev-manual-intro.xml
+++ b/documentation/dev-manual/dev-manual-intro.xml
@@ -69,7 +69,7 @@
                 <listitem><para>Reference material.  
                     This type of material resides in an appropriate reference manual.  
                     For example, system variables are documented in the 
-                    <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'>
+                    <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html'>
                     Yocto Project Reference Manual</ulink>.</para></listitem>
                 <listitem><para>Detailed public information that is not specific to the Yocto Project.  
                     For example, exhaustive information on how to use Git is covered better through the 
@@ -90,27 +90,27 @@
                     </emphasis> The home page for the Yocto Project provides lots of information on the project 
                     as well as links to software and documentation.</para></listitem>
                 <listitem><para><emphasis>
-                    <ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html'>
+                    <ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html'>
                     The Yocto Project Quick Start</ulink>:</emphasis> This short document lets you get started 
                     with the Yocto Project quickly and start building an image.</para></listitem>
                 <listitem><para><emphasis> 
-                    <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'>
+                    <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html'>
                     The Yocto Project Reference Manual</ulink>:</emphasis> This manual is a reference 
                     guide to the Yocto Project build component known as "Poky."  
                     The manual also contains a reference chapter on Board Support Package (BSP) 
                     layout.</para></listitem>
                 <listitem><para><emphasis>
-                    <ulink url='http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.html'>
+                    <ulink url='http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html'>
                     The Yocto Project Application Development Toolkit (ADT) User's Guide</ulink>:</emphasis>
                     This guide provides information that lets you get going with the ADT to 
                     develop projects using the Yocto Project.</para></listitem>
                 <listitem><para><emphasis>
-                    <ulink url='http://www.yoctoproject.org/docs/1.1/bsp-guide/bsp-guide.html'>
+                    <ulink url='http://www.yoctoproject.org/docs/latest/bsp-guide/bsp-guide.html'>
                     The Yocto Project Board Support Package (BSP) Developer's Guide</ulink>:</emphasis>
                     This guide defines the structure for BSP components.  
                     Having a commonly understood structure encourages standardization.</para></listitem>
                 <listitem><para><emphasis>
-                    <ulink url='http://www.yoctoproject.org/docs/1.1/kernel-manual/kernel-manual.html'>
+                    <ulink url='http://www.yoctoproject.org/docs/latest/kernel-manual/kernel-manual.html'>
                     The Yocto Project Kernel Architecture and Use Manual</ulink>:</emphasis>
                     This manual describes the architecture of the Yocto Project kernel and provides 
                     some work flow examples.</para></listitem>
diff --git a/documentation/dev-manual/dev-manual-model.xml b/documentation/dev-manual/dev-manual-model.xml
index 1d45a036c8..f2912b1c1b 100644
--- a/documentation/dev-manual/dev-manual-model.xml
+++ b/documentation/dev-manual/dev-manual-model.xml
@@ -24,7 +24,7 @@
     For a user-space application development example that uses the 
     <trademark class='trade'>Eclipse</trademark> IDE,
     see the 
-    <ulink url='http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.html'>
+    <ulink url='http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html'>
     The Yocto Project Application Development Toolkit (ADT) User's Guide</ulink>.
 </para>
 
@@ -79,8 +79,8 @@
             <orderedlist>
                 <listitem><para><emphasis>Set up your host development system to support 
                     development using the Yocto Project</emphasis>:  See the
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>The Linux Distributions</ulink>" and the 
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" sections both
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>The Linux Distributions</ulink>" and the 
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" sections both
                     in the Yocto Project Quick Start for requirements.</para></listitem>
                 <listitem><para><emphasis>Establish a local copy of the Yocto Project files on your 
                     system</emphasis>:  You need to have the Yocto Project files available on your host system. 
@@ -137,7 +137,7 @@
                     N450, and Sugar Bay are isolated.</note>
                     <para>When you set up a layer for a new BSP, you should follow a standard layout.  
                     This layout is described in the section
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/bsp-guide/bsp-guide.html#bsp-filelayout'>Example Filesystem Layout</ulink>" section of the Board Support Package (BSP) Development Guide.  
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/bsp-guide/bsp-guide.html#bsp-filelayout'>Example Filesystem Layout</ulink>" section of the Board Support Package (BSP) Development Guide.  
                     In the standard layout, you will notice a suggested structure for recipes and  
                     configuration information.  
                     You can see the standard layout for the Crown Bay BSP in this example by examining the 
@@ -160,7 +160,7 @@
                     You need to get the build environment ready by sourcing an environment setup script 
                     and you need to be sure two key configuration files are configured appropriately.</para>
                     <para>The entire process for building an image is overviewed in the section
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>" section of the Yocto Project Quick Start.    
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>" section of the Yocto Project Quick Start.    
                     You might want to reference this information.</para></listitem>
                 <listitem><para><emphasis>Build the image</emphasis>:  The Yocto Project uses the BitBake 
                     tool to build images based on the type of image you want to create.  
@@ -168,8 +168,8 @@
                     <ulink url='http://bitbake.berlios.de/manual/'>here</ulink>.</para>
                     <para>The build process supports several types of images to satisfy different needs.  
                     See the 
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>" appendix in the 
-                    <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'>
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>" appendix in the 
+                    <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html'>
                     Yocto Project Reference Manual</ulink>for information on supported images.</para></listitem>
             </orderedlist>
         </para>
@@ -178,7 +178,7 @@
             You can view a video presentation on "Building Custom Embedded Images with Yocto"
             at <ulink url='http://free-electrons.com/blog/elc-2011-videos'>Free Electrons</ulink>.  
             You can also find supplemental information in  
-            <ulink url='http://yoctoproject.org/docs/1.1/bsp-guide/bsp-guide.html'>
+            <ulink url='http://yoctoproject.org/docs/latest/bsp-guide/bsp-guide.html'>
             The Board Support Package (BSP) Development Guide</ulink>.
             Finally, there is wiki page write up of the example also located 
             <ulink url='https://wiki.yoctoproject.org/wiki/Transcript:_creating_one_generic_Atom_BSP_from_another'>
@@ -201,7 +201,7 @@
             The remainder of this section presents a high-level overview of the Linux Yocto 
             kernel architecture and the steps to modify the Linux Yocto kernel.
             For a complete discussion of the kernel, see  
-            <ulink url='http://www.yoctoproject.org/docs/1.1/kernel-manual/kernel-manual.html'>
+            <ulink url='http://www.yoctoproject.org/docs/latest/kernel-manual/kernel-manual.html'>
             The Yocto Project Kernel Architecture and Use Manual</ulink>.
             You can reference the appendix 
             "<link linkend='dev-manual-kernel-appendix'>Kernel Modification Example</link>"
@@ -349,7 +349,7 @@
             <para>
                 Again, for a complete discussion of the Yocto Project kernel's architcture and its 
                 branching strategy,
-                see the <ulink url='http://www.yoctoproject.org/docs/1.1/kernel-manual/kernel-manual.html'>
+                see the <ulink url='http://www.yoctoproject.org/docs/latest/kernel-manual/kernel-manual.html'>
                 The Yocto Project Kernel Architecture and Use Manual</ulink>.
                 Also, you can reference 
                 <xref linkend='modifying-the-kernel-source-code'>Modifying the Kernel Source Code</xref>
@@ -373,8 +373,8 @@
                 <orderedlist>
                     <listitem><para><emphasis>Set up your host development system to support 
                         development using the Yocto Project</emphasis>:  See  
-                        "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>The Linux Distributions</ulink>" and  
-                        "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" sections both
+                        "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>The Linux Distributions</ulink>" and  
+                        "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" sections both
                         in the Yocto Project Quick Start for requirements.</para></listitem>
                     <listitem><para><emphasis>Establish a local copy of the Yocto Project files on your 
                         system</emphasis>:  Having the Yocto Project files on your system gives you access to 
@@ -453,7 +453,7 @@
                         (<filename>local.conf</filename> and <filename>bblayers.conf</filename>)
                         are configured appropriately.</para>
                         <para>The entire process for building an image is overviewed in the 
-                        "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>" section of the Yocto Project Quick Start.    
+                        "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>" section of the Yocto Project Quick Start.    
                         You might want to reference this information.
                         Also, you should look at the detailed examples found in the appendices at 
                         at the end of this manual.</para></listitem>
@@ -464,8 +464,8 @@
                         <ulink url='http://bitbake.berlios.de/manual/'>here</ulink>.</para>
                         <para>The build process supports several types of images to satisfy different needs.  
                         See the appendix
-                        "<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>" in the 
-                        <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'>
+                        "<ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>" in the 
+                        <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html'>
                         Yocto Project Reference Manual</ulink> for information on supported 
                         images.</para></listitem>
                     <listitem><para><emphasis>Make your configuration changes available
@@ -517,7 +517,7 @@
             provides an overview of the general development process.
             If you want to see a detailed example of the process as it is used from within the Eclipse 
             IDE, see 
-            <ulink url='http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.html'>
+            <ulink url='http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html'>
             The Application Development Toolkit (ADT) User's Manual</ulink>.
         </para>
 
@@ -534,8 +534,8 @@
             <orderedlist>
                 <listitem><para><emphasis>Prepare the Host System for the Yocto Project</emphasis>:  
                     See  
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>The Linux Distributions</ulink>" and  
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" sections both
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>The Linux Distributions</ulink>" and  
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" sections both
                     in the Yocto Project Quick Start for requirements.</para></listitem>
 
 <!--
@@ -583,9 +583,9 @@ WRITER NOTE:  The areas to get the kernel and root filesystem are located in the
                         </itemizedlist></para>
                     <para>For information on pre-built kernel image naming schemes for images 
                     that can run on the QEMU emulator, see the
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#using-pre-built'>Using Pre-Built Binaries and QEMU</ulink>"
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#using-pre-built'>Using Pre-Built Binaries and QEMU</ulink>"
                     section in  
-                    <ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html'>
+                    <ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html'>
                     The Yocto Project Quick Start</ulink>.</para></listitem>
                 <listitem><para><emphasis>Install the ADT</emphasis>:  
                     The ADT provides a target-specific cross-development toolchain, the root filesystem,
@@ -594,8 +594,8 @@ WRITER NOTE:  The areas to get the kernel and root filesystem are located in the
                     easy method.
                     You can get these pieces by running an ADT installer script, which is configurable.
                     For information on how to install the ADT, see the
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.html#using-the-adt-installer'>Using the ADT Installer</ulink>" section in
-                    <ulink url='http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.html'>The Yocto Project
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html#using-the-adt-installer'>Using the ADT Installer</ulink>" section in
+                    <ulink url='http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html'>The Yocto Project
                     Application Development (ADT) User's Manual</ulink>.</para></listitem>
                 <listitem><para><emphasis>If Applicable, Secure the Target Root Filesystem</emphasis>:  
                     If you choose not to install the ADT using the ADT Installer,
@@ -665,7 +665,7 @@ WRITER NOTE:  The areas to get the kernel and root filesystem are located in the
                     Download kernel, root filesystem, and any other files you need for your process.
                     <note>In order to use the root filesystem in QEMU, you need to extract it.
                     See the 
-                    "<ulink url='http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.html#extracting-the-root-filesystem'>Extracting the Root Filesystem</ulink>" section for information on how to extract the 
+                    "<ulink url='http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html#extracting-the-root-filesystem'>Extracting the Root Filesystem</ulink>" section for information on how to extract the 
                     root filesystem.</note></para></listitem>
                 <listitem><para><emphasis>Develop and Test your Application:</emphasis>  At this point, 
                     you have the tools to develop your application.  
diff --git a/documentation/dev-manual/dev-manual-newbie.xml b/documentation/dev-manual/dev-manual-newbie.xml
index 3a57942481..54dd71a525 100644
--- a/documentation/dev-manual/dev-manual-newbie.xml
+++ b/documentation/dev-manual/dev-manual-newbie.xml
@@ -170,9 +170,9 @@
             Images are the binary output that runs on specific hardware and for specific
             use cases.
             For a list of the supported image types that the Yocto Project provides, see the
-            "<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>"
+            "<ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>"
             appendix in
-            <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'>
+            <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html'>
             The Yocto Project Reference Manual</ulink>.</para></listitem>
         <listitem><para><emphasis>Layer:</emphasis> A collection of recipes representing the core, 
             a BSP, or an application stack.</para></listitem>
@@ -223,7 +223,7 @@
             <para>You can find instruction on how to set up the Yocto Project files on your 
             host development system by reading 
             the 
-            "<ulink url='http://www.yoctoproject.org/docs/1.1/dev-manual/dev-manual.html#getting-setup'>Getting
+            "<ulink url='http://www.yoctoproject.org/docs/latest/dev-manual/dev-manual.html#getting-setup'>Getting
             Setup</ulink>" section.</para></listitem>
         <listitem><para><emphasis>Yocto Project Build Directory:</emphasis>
             This term refers to the area used by the Yocto Project for builds.  
@@ -593,8 +593,8 @@
         You should send patches to the appropriate Yocto Project mailing list to get them 
         in front of the Yocto Project Maintainer.
         For a list of the Yocto Project mailing lists, see the
-        "<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#resources-mailinglist'>Mailing lists</ulink>" section in 
-        <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'> The 
+        "<ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html#resources-mailinglist'>Mailing lists</ulink>" section in 
+        <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html'> The 
         Yocto Project Reference Manual</ulink>.
     </para>
 
diff --git a/documentation/dev-manual/dev-manual-start.xml b/documentation/dev-manual/dev-manual-start.xml
index a1f2e65442..df1d59fe79 100644
--- a/documentation/dev-manual/dev-manual-start.xml
+++ b/documentation/dev-manual/dev-manual-start.xml
@@ -9,7 +9,7 @@
     This chapter introduces the Yocto Project and gives you an idea of what you need to get started.  
     You can find enough information to set up your development host and build or use images for 
     hardware supported by the Yocto Project by reading  
-    <ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html'>
+    <ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html'>
     The Yocto Project Quick Start</ulink>.
 </para>
 
@@ -57,7 +57,7 @@
                 </para></listitem>
             <listitem><para><emphasis>Packages:</emphasis>  The Yocto Project requires certain packages
                 exist on your development system (e.g. Python 2.6 or 2.7).  
-                See "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" 
+                See "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" 
                 section in the Yocto Project Quick start for the exact package 
                 requirements and the installation commands to install them 
                 for the supported distributions.</para></listitem>
@@ -213,7 +213,7 @@
                 applications using the Eclipse Integrated Development Environment (IDE),
                 you will need this plug-in.  
                 See the 
-                "<ulink url='http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.html#setting-up-the-eclipse-ide'>Setting up the Eclipse IDE</ulink>"
+                "<ulink url='http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html#setting-up-the-eclipse-ide'>Setting up the Eclipse IDE</ulink>"
                 section in the Yocto Application Development Toolkit (ADT) 
                 User’s Guide for more information.</para></listitem>
         </itemizedlist>
@@ -226,7 +226,7 @@
     <para>
         The build process creates an entire Linux distribution, including the toolchain, from source.  
         For more information on this topic, see the 
-        "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>"
+        "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>"
         section in the Yocto Project Quick Start.
     </para>
 
@@ -264,7 +264,7 @@
 
     <para>
         You can find details on all these steps in the 
-        "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#using-pre-built'>Using Pre-Built Binaries and QEMU</ulink>"
+        "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#using-pre-built'>Using Pre-Built Binaries and QEMU</ulink>"
         section of the Yocto Project Quick Start. 
     </para>
 </section>
diff --git a/documentation/dev-manual/dev-manual.xml b/documentation/dev-manual/dev-manual.xml
index 243afe4663..bfeb6fa436 100644
--- a/documentation/dev-manual/dev-manual.xml
+++ b/documentation/dev-manual/dev-manual.xml
@@ -51,7 +51,7 @@
       <note>
           Due to production processes, there could be differences between the Yocto Project
           documentation bundled in the release tarball and  
-          <ulink url='http://www.yoctoproject.org/docs/1.1/dev-manual/dev-manual.html'>
+          <ulink url='http://www.yoctoproject.org/docs/latest/dev-manual/dev-manual.html'>
           The Yocto Project Development Manual</ulink> on
           the <ulink url='http://www.yoctoproject.org'>Yocto Project</ulink> website.
           For the latest version of this manual, see the manual on the website.