documentation: Updated everything for new overview-manual

This involved changing the root manual folder from
"getting-started" to "overview-manual".

Also, every link using the ENTITY "YOCTO_DOCS_GS_URL" was
changed to "YOCTO_DOCS_OM_URL".  Most manuals had several
occurrences of these links.

The makefile needed updating to process the new manual
and not process the old "getting-started" manual.

(From yocto-docs rev: 1abf64e56e9096258038ae37b787a81bf786bb3b)

Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

3 files changed, 25 insertions, 25 deletions

diff --git a/documentation/dev-manual/dev-manual-common-tasks.xml b/documentation/dev-manual/dev-manual-common-tasks.xml
index fd1734beec..85b3a4a8a2 100644
--- a/documentation/dev-manual/dev-manual-common-tasks.xml
+++ b/documentation/dev-manual/dev-manual-common-tasks.xml
@@ -24,7 +24,7 @@
             each other.
             For introductory information on the Yocto Project Layer Model,
             see the
-            "<ulink url='&YOCTO_DOCS_GS_URL;#the-yocto-project-layer-model'>The Yocto Project Layer Model</ulink>"
+            "<ulink url='&YOCTO_DOCS_OM_URL;#the-yocto-project-layer-model'>The Yocto Project Layer Model</ulink>"
             section in the Yocto Project Overview and Concepts Manual.
         </para>
 
@@ -1855,7 +1855,7 @@
 
             <para>
                 You can find more information about the build process in
-                "<ulink url='&YOCTO_DOCS_GS_URL;#overview-development-environment'>The Yocto Project Development Environment</ulink>"
+                "<ulink url='&YOCTO_DOCS_OM_URL;#overview-development-environment'>The Yocto Project Development Environment</ulink>"
                 chapter of the Yocto Project Overview and Concepts Manual.
             </para>
         </section>
@@ -1872,7 +1872,7 @@
                 Your recipe must have a <filename>SRC_URI</filename> variable
                 that points to where the source is located.
                 For a graphical representation of source locations, see the
-                "<ulink url='&YOCTO_DOCS_GS_URL;#sources-dev-environment'>Sources</ulink>"
+                "<ulink url='&YOCTO_DOCS_OM_URL;#sources-dev-environment'>Sources</ulink>"
                 section in the Yocto Project Overview and Concepts Manual.
             </para>
 
@@ -2185,7 +2185,7 @@
                         containing the current checksum.
                         For more explanation and examples of how to set the
                         <filename>LIC_FILES_CHKSUM</filename> variable, see the
-                        "<ulink url='&YOCTO_DOCS_GS_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
+                        "<ulink url='&YOCTO_DOCS_OM_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
                         section in the Yocto Project Overview and Concepts
                         Manual.</para>
 
@@ -2334,7 +2334,7 @@
                 automatically add a runtime dependency to "mypackage" on
                 "example").
                 See the
-                "<ulink url='&YOCTO_DOCS_GS_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
+                "<ulink url='&YOCTO_DOCS_OM_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
                 section in the Yocto Project Overview and Concepts Manual for
                 further details.
             </para>
@@ -3398,7 +3398,7 @@
                     The variable
                     <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-LIC_FILES_CHKSUM'>LIC_FILES_CHKSUM</ulink></filename>
                     is used to track source license changes as described in the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
+                    "<ulink url='&YOCTO_DOCS_OM_URL;#usingpoky-configuring-LIC_FILES_CHKSUM'>Tracking License Changes</ulink>"
                     section in the Yocto Project Overview and Concepts Manual.
                     You can quickly create Autotool-based recipes in a manner
                     similar to the previous example.
@@ -3606,7 +3606,7 @@
                                 allows runtime dependencies between packages
                                 to be added automatically.
                                 See the
-                                "<ulink url='&YOCTO_DOCS_GS_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
+                                "<ulink url='&YOCTO_DOCS_OM_URL;#automatically-added-runtime-dependencies'>Automatically Added Runtime Dependencies</ulink>"
                                 section in the Yocto Project Overview and
                                 Concepts Manual for more information.
                                 </para></listitem>
@@ -6347,7 +6347,7 @@
                 can use an existing file provided by the Wic installation.
                 As shipped, kickstart files can be found in the
                 Yocto Project
-                <ulink url='&YOCTO_DOCS_GS_URL;#source-repositories'>Source Repositories</ulink>
+                <ulink url='&YOCTO_DOCS_OM_URL;#source-repositories'>Source Repositories</ulink>
                 in the following two locations:
                 <literallayout class='monospaced'>
      poky/meta-yocto-bsp/wic
@@ -8506,7 +8506,7 @@ Some notes from Cal:
 
                 <para>
                     Because the OpenEmbedded build system uses
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#overview-checksums'>signatures</ulink>",
+                    "<ulink url='&YOCTO_DOCS_OM_URL;#overview-checksums'>signatures</ulink>",
                     which are unique to a given build, the build system
                     knows when to rebuild packages.
                     All the inputs into a given task are represented by a
@@ -8610,7 +8610,7 @@ Some notes from Cal:
 
                     <para>
                         For more information on shared state, see the
-                        "<ulink url='&YOCTO_DOCS_GS_URL;#shared-state-cache'>Shared State Cache</ulink>"
+                        "<ulink url='&YOCTO_DOCS_OM_URL;#shared-state-cache'>Shared State Cache</ulink>"
                         section in the Yocto Project Overview and Concepts
                         Manual.
                     </para>
@@ -8856,7 +8856,7 @@ Some notes from Cal:
                     <filename>connman.inc</filename> file in the
                     <filename>meta/recipes-connectivity/connman/</filename>
                     directory of the <filename>poky</filename>
-                    <ulink url='&YOCTO_DOCS_GS_URL;#yocto-project-repositories'>source repository</ulink>.
+                    <ulink url='&YOCTO_DOCS_OM_URL;#yocto-project-repositories'>source repository</ulink>.
                     You can also find examples in
                     <filename>meta/classes/kernel.bbclass</filename>.
                  </para>
@@ -10399,7 +10399,7 @@ Some notes from Cal:
                 Enabling build history as previously described causes the
                 OpenEmbedded build system to collect build output information
                 and commit it as a single commit to a local
-                <ulink url='&YOCTO_DOCS_GS_URL;#git'>Git</ulink>
+                <ulink url='&YOCTO_DOCS_OM_URL;#git'>Git</ulink>
                 repository.
                 <note>
                     Enabling build history increases your build times slightly,
@@ -12261,7 +12261,7 @@ Some notes from Cal:
      ${BUILDDIR}/tmp/stamps/i586-poky-linux/db/6.0.30-r1.do_fetch.sigdata.7c048c18222b16ff0bcee2000ef648b1
                         </literallayout>
                         For tasks that are accelerated through the shared state
-                        (<ulink url='&YOCTO_DOCS_GS_URL;#shared-state-cache'>sstate</ulink>)
+                        (<ulink url='&YOCTO_DOCS_OM_URL;#shared-state-cache'>sstate</ulink>)
                         cache, an additional <filename>siginfo</filename> file
                         is written into
                         <ulink url='&YOCTO_DOCS_REF_URL;#var-SSTATE_DIR'><filename>SSTATE_DIR</filename></ulink>
@@ -12370,7 +12370,7 @@ Some notes from Cal:
                 <filename>-c</filename>, BitBake will only run the task if it
                 considers it "out of date".
                 See the
-                "<ulink url='&YOCTO_DOCS_GS_URL;#stamp-files-and-the-rerunning-of-tasks'>Stamp Files and the Rerunning of Tasks</ulink>"
+                "<ulink url='&YOCTO_DOCS_OM_URL;#stamp-files-and-the-rerunning-of-tasks'>Stamp Files and the Rerunning of Tasks</ulink>"
                 section in the Yocto Project Overview and Concepts Manual for
                 how BitBake determines whether a task is "out of date".
             </para>
diff --git a/documentation/dev-manual/dev-manual-newbie.xml b/documentation/dev-manual/dev-manual-newbie.xml
index 1579a4e89e..6ccf21882b 100644
--- a/documentation/dev-manual/dev-manual-newbie.xml
+++ b/documentation/dev-manual/dev-manual-newbie.xml
@@ -99,7 +99,7 @@
                 with the OpenEmbedded build system is advisable.
                 Of the SCMs BitBake supports, the
                 Yocto Project team strongly recommends using
-                <ulink url='&YOCTO_DOCS_GS_URL;#git'>Git</ulink>.
+                <ulink url='&YOCTO_DOCS_OM_URL;#git'>Git</ulink>.
                 Git is a distributed system that is easy to backup,
                 allows you to work remotely, and then connects back to the
                 infrastructure.
@@ -311,7 +311,7 @@
                 <itemizedlist>
                     <listitem><para>
                         Use
-                        <ulink url='&YOCTO_DOCS_GS_URL;#git'>Git</ulink>
+                        <ulink url='&YOCTO_DOCS_OM_URL;#git'>Git</ulink>
                         as the source control system.
                         </para></listitem>
                     <listitem><para>
@@ -325,7 +325,7 @@
                         Separate the project's Metadata and code by using
                         separate Git repositories.
                         See the
-                        "<ulink url='&YOCTO_DOCS_GS_URL;#yocto-project-repositories'>Yocto Project Source Repositories</ulink>"
+                        "<ulink url='&YOCTO_DOCS_OM_URL;#yocto-project-repositories'>Yocto Project Source Repositories</ulink>"
                         section for information on these repositories.
                         See the
                         "<link linkend='working-with-yocto-project-source-files'>Working With Yocto Project Source Files</link>"
@@ -549,7 +549,7 @@
         pull the change into the component's upstream repository.
         You do this by pushing to a contribution repository that is upstream.
         See the
-        "<ulink url='&YOCTO_DOCS_GS_URL;#gs-git-workflows-and-the-yocto-project'>Git Workflows and the Yocto Project</ulink>"
+        "<ulink url='&YOCTO_DOCS_OM_URL;#gs-git-workflows-and-the-yocto-project'>Git Workflows and the Yocto Project</ulink>"
         section in the Yocto Project Overview and Concepts Manual for additional
         concepts on working in the Yocto Project development environment.
     </para>
@@ -749,7 +749,7 @@
                             </para></listitem>
                         <listitem><para>
                             <emphasis>Search by File:</emphasis>
-                            Using <ulink url='&YOCTO_DOCS_GS_URL;#git'>Git</ulink>,
+                            Using <ulink url='&YOCTO_DOCS_OM_URL;#git'>Git</ulink>,
                             you can enter the following command to bring up a
                             short list of all commits against a specific file:
                             <literallayout class='monospaced'>
diff --git a/documentation/dev-manual/dev-manual-start.xml b/documentation/dev-manual/dev-manual-start.xml
index f7f274bc8d..87d8757a09 100644
--- a/documentation/dev-manual/dev-manual-start.xml
+++ b/documentation/dev-manual/dev-manual-start.xml
@@ -260,12 +260,12 @@
                 <listitem><para>
                     For concepts and introductory information about Git as it
                     is used in the Yocto Project, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#git'>Git</ulink>"
+                    "<ulink url='&YOCTO_DOCS_OM_URL;#git'>Git</ulink>"
                     section in the Yocto Project Overview and Concepts Manual.
                     </para></listitem>
                 <listitem><para>
                     For concepts on Yocto Project source repositories, see the
-                    "<ulink url='&YOCTO_DOCS_GS_URL;#yocto-project-repositories'>Yocto Project Source Repositories</ulink>"
+                    "<ulink url='&YOCTO_DOCS_OM_URL;#yocto-project-repositories'>Yocto Project Source Repositories</ulink>"
                     section in the Yocto Project Overview and Concepts Manual."
                     </para></listitem>
             </itemizedlist>
@@ -277,7 +277,7 @@
 
         <para>
             Working from a copy of the upstream Yocto Project
-            <ulink url='&YOCTO_DOCS_GS_URL;#source-repositories'>Source Repositories</ulink>
+            <ulink url='&YOCTO_DOCS_OM_URL;#source-repositories'>Source Repositories</ulink>
             is the preferred method for obtaining and using a Yocto Project
             release.
             You can view the Yocto Project Source Repositories at
@@ -306,7 +306,7 @@
                 <listitem><para>
                     <emphasis>Find the URL Used to Clone the Repository:</emphasis>
                     At the bottom of the page, note the URL used to
-                    <ulink url='&YOCTO_DOCS_GS_URL;#git-commands-clone'>clone</ulink>
+                    <ulink url='&YOCTO_DOCS_OM_URL;#git-commands-clone'>clone</ulink>
                     that repository (e.g.
                     <filename>&YOCTO_GIT_URL;/poky</filename>).
                     <note>
@@ -473,7 +473,7 @@
 
         <para>
             You create your Source Directory by using
-            <ulink url='&YOCTO_DOCS_GS_URL;#git'>Git</ulink> to clone a local
+            <ulink url='&YOCTO_DOCS_OM_URL;#git'>Git</ulink> to clone a local
             copy of the upstream <filename>poky</filename> repository.
             <note><title>Tip</title>
                 The preferred method of getting the Yocto Project Source
@@ -748,7 +748,7 @@
         <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
         under <filename>tmp/deploy/images</filename>.
         For detailed information on the build process using BitBake, see the
-        "<ulink url='&YOCTO_DOCS_GS_URL;#images-dev-environment'>Images</ulink>"
+        "<ulink url='&YOCTO_DOCS_OM_URL;#images-dev-environment'>Images</ulink>"
         section in the Yocto Project Overview and Concepts Manual.
     </para>