yocto-project-qs and others: Rewrite of the QS

This was a complete re-write of the YP Quick Start in an attempt
to streamline it, remove unecessary detail, and make it flow better
with the examples.  In doing so, many manuals were affected due to
section headings being renamed, information being moved, etc.  Here
is a list of the changes by manual:

Makefile - Removed two figures from TARFILE list for the
           yocto-project-qs.

           Added building-an-image.png to the ref-manual TARFILE list.

           Added using-a-pre-build-image.png to the adt-manual TARFILE
           list.

           Repositioned 'eclipse' in the adt-manual TARFILE list.

adt-manual: Fixed a cross-reference so that it goes to the new
            'Building Images' section that is within the YP QS.

            Added new section 'Example Using Pre-Build Binaries and
            QEMU' to hold the information that was formerly in YP QS.

dev-manual: Removed a cross-reference into the YP QS that promised how
            to configure the most efficent build.

            Changed a cross-reference into the YP QS from 'The Packages'
            to 'The Build System Packages'.

            Changed a cross-reference into the YP QS from 'Building an
            Image' to 'Building Images'.

            Changed a text reference from the YP QS to the adt-manual.

            Moved the bit about getting YP files by using the YP website
            from the YP QS to the dev-manual.

            Changed a cross-reference into the YP QS from 'Using Pre-Built
            Binaries and QEMU' to 'Example Using Pre-built Binaries and
            QEMU', which was moved to the adt-manual.

ref-manual: Changed a cross-reference into the YP QS from 'What You
            Need and How You Get It' to 'Setting Up to Use the Yocto Project'.

            Moved the note about if your system has oss4-dev in the
            packages area in the YP QS to the appropriate area in the
            ref-manual.

            Moved the introduction information regarding building an image
            along with the figure from YP QS to the ref-manual's section on
            building images.

toaster-manual: Changed a cross-reference into the YP QS from 'What You
                Need and How You Get It' to 'Setting Up to Use the Yocto
                Project'.

yocto-project-qs: Complete rewrite that changed many section headings and
                  removed much detail, which was placed in other manuals.

(From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

4 files changed, 28 insertions, 17 deletions

diff --git a/documentation/dev-manual/dev-manual-common-tasks.xml b/documentation/dev-manual/dev-manual-common-tasks.xml
index a929481633..e927a89bee 100644
--- a/documentation/dev-manual/dev-manual-common-tasks.xml
+++ b/documentation/dev-manual/dev-manual-common-tasks.xml
@@ -5021,9 +5021,6 @@
             Furthermore, the <link linkend='build-directory'>Build Directory</link> is
             <filename>build</filename> and is located in <filename>poky</filename> and
             the kernel is based on the Linux 3.4 kernel.
-            For general information on how to configure the most efficient build, see the
-            "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>" section
-            in the Yocto Project Quick Start.
         </para>
 
         <para>
diff --git a/documentation/dev-manual/dev-manual-model.xml b/documentation/dev-manual/dev-manual-model.xml
index 03eb5f1176..9c549d7464 100644
--- a/documentation/dev-manual/dev-manual-model.xml
+++ b/documentation/dev-manual/dev-manual-model.xml
@@ -124,7 +124,7 @@
                     development using the Yocto Project</emphasis>:  See the
                     "<ulink url='&YOCTO_DOCS_QS_URL;#the-linux-distro'>The Linux Distribution</ulink>"
                     and the
-                    "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Packages</ulink>" sections both
+                    "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Build Host Packages</ulink>" sections both
                     in the Yocto Project Quick Start for requirements.</para></listitem>
                 <listitem><para><emphasis>Establish a local copy of the project files on your
                     system</emphasis>:  You need this <link linkend='source-directory'>Source
@@ -223,7 +223,7 @@
                     "<link linkend='enabling-your-layer'>Enabling Your Layer</link>" section
                     for information on how to let the build system know about your new layer.</para>
                     <para>The entire process for building an image is overviewed in the section
-                    "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>" section
+                    "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>" section
                     of the Yocto Project Quick Start.
                     You might want to reference this information.</para></listitem>
                 <listitem><para><emphasis>Build the image</emphasis>:  The OpenEmbedded build system
@@ -451,7 +451,7 @@
                     <listitem><para><emphasis>Set up your host development system to support
                         development using the Yocto Project</emphasis>:  See
                         "<ulink url='&YOCTO_DOCS_QS_URL;#the-linux-distro'>The Linux Distribution</ulink>" and
-                        "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Packages</ulink>" sections both
+                        "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Build Host Packages</ulink>" sections both
                         in the Yocto Project Quick Start for requirements.</para></listitem>
                     <listitem><para><emphasis>Establish a local copy of project files on your
                         system</emphasis>:  Having the <link linkend='source-directory'>Source
@@ -476,7 +476,7 @@
                         (<filename>local.conf</filename> and <filename>bblayers.conf</filename>)
                         are configured appropriately.</para>
                         <para>The entire process for building an image is overviewed in the
-                        "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>"
+                        "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
                         section of the Yocto Project Quick Start.
                         You might want to reference this information.
                         You can find more information on BitBake in the
@@ -617,7 +617,7 @@
                     <para>For information on pre-built kernel image naming schemes for images
                     that can run on the QEMU emulator, see the
                     "<ulink url='&YOCTO_DOCS_QS_URL;#downloading-the-pre-built-linux-kernel'>Downloading the Pre-Built Linux Kernel</ulink>"
-                    section in the Yocto Project Quick Start.</para></listitem>
+                    section in the Yocto Project Application Developer's Guide.</para></listitem>
                 <listitem><para><emphasis>Install the ADT</emphasis>:
                     The ADT provides a target-specific cross-development toolchain, the root filesystem,
                     the QEMU emulator, and other tools that can help you develop your application.
@@ -646,7 +646,7 @@
                     section in the Yocto Project Application Developer's Guide for information
                     and the
                     "<ulink url='&YOCTO_DOCS_QS_URL;#installing-the-toolchain'>Installing the Toolchain</ulink>"
-                    in the Yocto Project Quick Start for information on finding and installing
+                    in the Yocto Project Application Developer's Guide for information on finding and installing
                     the correct toolchain based on your host development system and your target
                     architecture.
                     </para></listitem>
@@ -1163,7 +1163,7 @@
                                 If the architecture you need is not listed in
                                 the menu, you will need to build the image.
                                 See the
-                                "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>"
+                                "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
                                 section of the Yocto Project Quick Start for
                                 more information.</para></listitem>
                         </itemizedlist>
@@ -1740,7 +1740,7 @@
                         For information on how to set up a local copy of the
                         <filename>poky</filename> repository and on how to
                         build a Yocto Project image, see the
-                        "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>"
+                        "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
                         section in the Yocto Project Quick Start.
                         </para></listitem>
                     <listitem><para>
@@ -2375,7 +2375,7 @@
                     <filename>bitbake -c cleanall <replaceable>package</replaceable></filename>).
                     Modifications will also disappear if you use the <filename>rm_work</filename>
                     feature as described in the
-                    "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>"
+                    "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
                     section of the Yocto Project Quick Start.
                     </note></para></listitem>
                 <listitem><para><emphasis>Generate the Patch:</emphasis>
diff --git a/documentation/dev-manual/dev-manual-newbie.xml b/documentation/dev-manual/dev-manual-newbie.xml
index 2c5fa683e0..70fa96975d 100644
--- a/documentation/dev-manual/dev-manual-newbie.xml
+++ b/documentation/dev-manual/dev-manual-newbie.xml
@@ -709,7 +709,7 @@
                 You "bake" something by running it through BitBake.</para>
                 <para>It is worth noting that the term "package" can, in general, have subtle
                 meanings.  For example, the packages referred to in the
-                "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Packages</ulink>" section are
+                "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Build Host Packages</ulink>" section are
                 compiled binaries that, when installed, add functionality to your Linux
                 distribution.</para>
                 <para>Another point worth noting is that historically within the Yocto Project,
diff --git a/documentation/dev-manual/dev-manual-start.xml b/documentation/dev-manual/dev-manual-start.xml
index 36a3593c19..db989b7bfa 100644
--- a/documentation/dev-manual/dev-manual-start.xml
+++ b/documentation/dev-manual/dev-manual-start.xml
@@ -73,7 +73,7 @@
                 </para></listitem>
             <listitem><para><emphasis>Packages:</emphasis>  The OpenEmbedded build system
                 requires that certain packages exist on your development system (e.g. Python 2.7).
-                See "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Packages</ulink>"
+                See "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Build Host Packages</ulink>"
                 section in the Yocto Project Quick Start and the
                 "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>"
                 section in the Yocto Project Reference Manual for the exact
@@ -125,6 +125,20 @@
                 wiki page</ulink>, which describes how to create local
                 Git repositories for both
                 <filename>poky</filename> and <filename>meta-intel</filename>.
+                </para>
+                <para>
+                You can also get the Yocto Project Files by downloading
+                Yocto Project releases from the
+                <ulink url="&YOCTO_HOME_URL;">Yocto Project website</ulink>.
+                From the website, you just click "Downloads" in the navigation
+                pane to the left to display all Yocto Project downloads.
+                Current and archived releases are available for download.
+                Nightly and developmental builds are also maintained at
+                <ulink url="&YOCTO_AB_NIGHTLY_URL;"></ulink>.
+                One final site you can visit for information on Yocto Project
+                releases is the
+                <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                wiki.
                 </para></listitem>
             <listitem id='local-kernel-files'><para><emphasis>Yocto Project Kernel:</emphasis>
                 If you are going to be making modifications to a supported Yocto Project kernel, you
@@ -277,7 +291,7 @@
     <para>
         The build process creates an entire Linux distribution, including the toolchain, from source.
         For more information on this topic, see the
-        "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>"
+        "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
         section in the Yocto Project Quick Start.
     </para>
 
@@ -349,8 +363,8 @@
         by sourcing an environment setup script.
         Finally, you start the QEMU emulator.
         You can find details on all these steps in the
-        "<ulink url='&YOCTO_DOCS_QS_URL;#using-pre-built'>Using Pre-Built Binaries and QEMU</ulink>"
-        section of the Yocto Project Quick Start.
+        "<ulink url='&YOCTO_DOCS_QS_URL;#using-pre-built'>Example Using Pre-Built Binaries and QEMU</ulink>"
+        section of the Yocto Project Application Developer's Guide.
         You can learn more about using QEMU with the Yocto Project in the
         "<link linkend='dev-manual-qemu'>Using the Quick EMUlator (QEMU)</link>"
         section.