documentation: Fixed links for "build-directory" term.

Fixes [YOCTO #11630]

Moving the "Yocto Project Terms" section from the dev-manual to the
ref-manual broke several links to the id "build-directory".  I fixed
these to reference into the ref-manual now.

(From yocto-docs rev: debe2ae8ce203ebe0f1cee0de54124c15df8bb7e)

Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

1 files changed, 31 insertions, 28 deletions

diff --git a/documentation/dev-manual/dev-manual-common-tasks.xml b/documentation/dev-manual/dev-manual-common-tasks.xml
index 4a7306fb24..d73b663250 100644
--- a/documentation/dev-manual/dev-manual-common-tasks.xml
+++ b/documentation/dev-manual/dev-manual-common-tasks.xml
@@ -655,7 +655,7 @@
                 <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-BBLAYERS'>BBLAYERS</ulink></filename>
                 variable in your <filename>conf/bblayers.conf</filename> file,
                 which is found in the
-                <link linkend='build-directory'>Build Directory</link>.
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                 The following example shows how to enable a layer named
                 <filename>meta-mylayer</filename>:
                 <literallayout class='monospaced'>
@@ -1192,7 +1192,7 @@
                 from within a recipe and using
                 <filename>EXTRA_IMAGE_FEATURES</filename> from within
                 your <filename>local.conf</filename> file, which is found in the
-                <link linkend='build-directory'>Build Directory</link>.
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
             </para>
 
             <para>
@@ -1539,7 +1539,7 @@
 
                 <para>
                     To run the tool, you just need to be in your
-                    <link linkend='build-directory'>Build Directory</link>
+                    <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
                     and have sourced the build environment setup script
                     (i.e.
                     <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>oe-init-build-env</filename></ulink>
@@ -2027,7 +2027,7 @@
                 or
                 <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
                 and you are in the
-                <link linkend='build-directory'>Build Directory</link>,
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
                 use BitBake to process your recipe.
                 All you need to provide is the
                 <filename><replaceable>basename</replaceable></filename> of the recipe as described
@@ -4238,7 +4238,7 @@
                     combination of multiple libraries you want to build.
                     You accomplish this through your <filename>local.conf</filename>
                     configuration file in the
-                    <link linkend='build-directory'>Build Directory</link>.
+                    <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                     An example configuration would be as follows:
                     <literallayout class='monospaced'>
      MACHINE = "qemux86-64"
@@ -4314,7 +4314,7 @@
                         <listitem><para>A unique architecture is defined for the Multilib packages,
                             along with creating a unique deploy folder under
                             <filename>tmp/deploy/rpm</filename> in the
-                            <link linkend='build-directory'>Build Directory</link>.
+                            <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                             For example, consider <filename>lib32</filename> in a
                             <filename>qemux86-64</filename> image.
                             The possible architectures in the system are "all", "qemux86_64",
@@ -4858,7 +4858,7 @@
                             or
                             <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
                             found in the
-                            <link linkend='build-directory'>Build Directory</link>.
+                            <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                             </para></listitem>
                     </itemizedlist>
                 </para>
@@ -4948,7 +4948,7 @@
                     or
                     <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>
                     script found in the
-                    <link linkend='build-directory'>Build Directory</link>.
+                    <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                 </para>
 
                 <section id='raw-mode'>
@@ -5934,7 +5934,7 @@
                 or
                 <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>
                 script found in the
-                <link linkend='build-directory'>Build Directory</link>.
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                 You must also be sure of the state of your build in the
                 <link linkend='source-directory'>Source Directory</link>.
                 The following commands run <filename>menuconfig</filename>
@@ -6104,7 +6104,7 @@
                 placed where the OpenEmbedded build system can find and apply them.
                 Syntactically, the configuration statement is identical to what would appear
                 in the <filename>.config</filename> file, which is in the
-                <link linkend='build-directory'>Build Directory</link>:
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
                 <literallayout class='monospaced'>
      tmp/work/<replaceable>arch</replaceable>-poky-linux/linux-yocto-<replaceable>release_specific_string</replaceable>/linux-<replaceable>arch</replaceable>-<replaceable>build_type</replaceable>
                 </literallayout>
@@ -6390,9 +6390,11 @@
             machine in a
             <link linkend='source-directory'>Source Directory</link>
             named <filename>poky</filename>.
-            Furthermore, the <link linkend='build-directory'>Build Directory</link> is
-            <filename>build</filename> and is located in <filename>poky</filename> and
-            the kernel is based on the Linux 3.4 kernel.
+            Furthermore, the
+            <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
+            is <filename>build</filename> and is located in
+            <filename>poky</filename> and the kernel is based on the
+            Linux 3.4 kernel.
         </para>
 
         <para>
@@ -6593,7 +6595,7 @@
                     <listitem><para><emphasis>Build for the correct target architecture:</emphasis> Your
                         selected <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
                         definition within the <filename>local.conf</filename> file in the
-                        <link linkend='build-directory'>Build Directory</link>
+                        <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
                         specifies the target architecture used when building the Linux kernel.
                         By default, <filename>MACHINE</filename> is set to
                         <filename>qemux86</filename>, which specifies a 32-bit
@@ -6653,7 +6655,7 @@
                                Never remove any files by hand from the
                                <filename>tmp/deploy</filename>
                                directory inside the
-                               <link linkend='build-directory'>Build Directory</link>.
+                               <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                                Always use the various BitBake clean tasks to
                                clear out previous build artifacts.
                                For information on the clean tasks, see the
@@ -7018,7 +7020,7 @@
                     previous bulleted item.</para></listitem>
                 <listitem><para><emphasis>Point to Your distribution configuration file:</emphasis>
                     In your <filename>local.conf</filename> file in the
-                    <link linkend='build-directory'>Build Directory</link>,
+                    <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
                     set your
                     <ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO'><filename>DISTRO</filename></ulink>
                     variable to point to your distribution's configuration file.
@@ -7078,7 +7080,7 @@
             <filename>TEMPLATECONF</filename> to locate the directory
             from which it gathers configuration information that ultimately
             ends up in the
-            <link linkend='build-directory'>Build Directory's</link>
+            <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
             <filename>conf</filename> directory.
             By default, <filename>TEMPLATECONF</filename> is set as
             follows in the <filename>poky</filename> repository:
@@ -8031,7 +8033,7 @@
                     setting
                     <ulink url='&YOCTO_DOCS_REF_URL;#var-PRSERV_HOST'><filename>PRSERV_HOST</filename></ulink>
                     in your <filename>local.conf</filename> file in the
-                    <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>:
+                    <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
                     <literallayout class='monospaced'>
      PRSERV_HOST = "localhost:0"
                     </literallayout>
@@ -8567,7 +8569,7 @@
                         <listitem><para>
                             Open the <filename>local.conf</filename> file
                             inside your
-                            <link linkend='build-directory'>Build Directory</link>
+                            <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
                             (e.g. <filename>~/poky/build/conf/local.conf</filename>).
                             </para></listitem>
                         <listitem><para>
@@ -9025,7 +9027,7 @@
                     and <ulink url='&YOCTO_DOCS_REF_URL;#var-EXTRA_IMAGE_FEATURES'><filename>EXTRA_IMAGE_FEATURES</filename></ulink>
                     variables to your <filename>local.conf</filename> file,
                     which is found in the
-                    <link linkend='build-directory'>Build Directory</link>:
+                    <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
                     <literallayout class='monospaced'>
      DISTRO_FEATURES_append = " ptest"
      EXTRA_IMAGE_FEATURES += "ptest-pkgs"
@@ -9261,8 +9263,8 @@
 
         <para>
             By default, the OpenEmbedded build system uses the
-            <link linkend='build-directory'>Build Directory</link> when
-            building source code.
+            <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
+            when building source code.
             The build process involves fetching the source files, unpacking
             them, and then patching them if necessary before the build takes
             place.
@@ -9626,7 +9628,7 @@
                 Using either of the following statements in your
                 image recipe or from within the
                 <filename>local.conf</filename> file found in the
-                <link linkend='build-directory'>Build Directory</link>
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
                 causes the build system to create a read-only root filesystem:
                 <literallayout class='monospaced'>
      IMAGE_FEATURES = "read-only-rootfs"
@@ -10220,7 +10222,7 @@
                         <ulink url='&YOCTO_DOCS_REF_URL;#var-TEST_IMAGE'><filename>TEST_IMAGE</filename></ulink>
                         variable to "1" in your <filename>local.conf</filename>
                         file in the
-                        <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>:
+                        <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
                         <literallayout class='monospaced'>
      TEST_IMAGE = "1"
                         </literallayout>
@@ -10352,7 +10354,8 @@
      $ bitbake <replaceable>image</replaceable> -c testexport
                 </literallayout>
                 Exporting the tests places them in the
-                <link linkend='build-directory'>Build Directory</link> in
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
+                in
                 <filename>tmp/testexport/</filename><replaceable>image</replaceable>,
                 which is controlled by the
                 <filename>TEST_EXPORT_DIR</filename> variable.
@@ -11509,7 +11512,7 @@
                 release just the source as a tarball.
                 You can do this by adding the following to the
                 <filename>local.conf</filename> file found in the
-                <link linkend='build-directory'>Build Directory</link>:
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
                 <literallayout class='monospaced'>
      INHERIT += "archiver"
      ARCHIVER_MODE[src] = "original"
@@ -11724,7 +11727,7 @@
                 <ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-report-error'><filename>report-error</filename></ulink>
                 class by adding the following statement to the end of
                 your <filename>local.conf</filename> file in your
-                <link linkend='build-directory'>Build Directory</link>.
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                 <literallayout class='monospaced'>
      INHERIT += "report-error"
                 </literallayout>
@@ -11783,7 +11786,7 @@
                 To disable the error reporting feature, simply remove or comment
                 out the following statement from the end of your
                 <filename>local.conf</filename> file in your
-                <link linkend='build-directory'>Build Directory</link>.
+                <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                 <literallayout class='monospaced'>
      INHERIT += "report-error"
                 </literallayout>