sphinx: initial sphinx support

This commit is autogenerated pandoc to generate an inital set
of reST files based on DocBook XML files.

A .rst file is generated for each .xml files in all manuals with this
command:

cd <manual>
for i in *.xml; do \
  pandoc -f docbook -t rst --shift-heading-level-by=-1 \
  $i -o $(basename $i .xml).rst \
done

The conversion was done with: pandoc 2.9.2.1-91 (Arch Linux).

Also created an initial top level index file for each document, and
added all 'books' to the top leve index.rst file.

The YP manuals layout is organized as:

Book
  Chapter
    Section
      Section
        Section

Sphinx uses section headers to create the document structure.
ReStructuredText defines sections headers like that:

   To break longer text up into sections, you use section headers. These
   are a single line of text (one or more words) with adornment: an
   underline alone, or an underline and an overline together, in dashes
   "-----", equals "======", tildes "~~~~~~" or any of the
   non-alphanumeric characters = - ` : ' " ~ ^ _ * + # < > that you feel
   comfortable with. An underline-only adornment is distinct from an
   overline-and-underline adornment using the same character. The
   underline/overline must be at least as long as the title text. Be
   consistent, since all sections marked with the same adornment style
   are deemed to be at the same level:

Let's define the following convention when converting from Docbook:

Book                => overline ===   (Title)
  Chapter           => overline ***   (1.)
    Section         => ====           (1.1)
      Section       => ----           (1.1.1)
        Section     => ~~~~           (1.1.1.1)
          Section   => ^^^^           (1.1.1.1.1)

During the conversion with pandoc, we used --shift-heading-level=-1 to
convert most of DocBook headings automatically. However with this
setting, the Chapter header was removed, so I added it back
manually. Without this setting all headings were off by one, which was
more difficult to manually fix.

At least with this change, we now have the same TOC with Sphinx and
DocBook.

(From yocto-docs rev: 3c73d64a476d4423ee4c6808c685fa94d88d7df8)

Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

2 files changed, 1459 insertions, 0 deletions

diff --git a/documentation/bsp-guide/bsp-guide.rst b/documentation/bsp-guide/bsp-guide.rst
new file mode 100644
index 0000000000..71ac1d0e97
--- /dev/null
+++ b/documentation/bsp-guide/bsp-guide.rst
@@ -0,0 +1,9 @@
+=====================================================
+Yocto Project Board Support Package Developer's Guide
+=====================================================
+
+.. toctree::
+   :caption: Table of Contents
+   :numbered:
+
+   bsp
diff --git a/documentation/bsp-guide/bsp.rst b/documentation/bsp-guide/bsp.rst
new file mode 100644
index 0000000000..09e25a061c
--- /dev/null
+++ b/documentation/bsp-guide/bsp.rst
@@ -0,0 +1,1450 @@
+************************************************
+Board Support Packages (BSP) - Developer's Guide
+************************************************
+
+A Board Support Package (BSP) is a collection of information that
+defines how to support a particular hardware device, set of devices, or
+hardware platform. The BSP includes information about the hardware
+features present on the device and kernel configuration information
+along with any additional hardware drivers required. The BSP also lists
+any additional software components required in addition to a generic
+Linux software stack for both essential and optional platform features.
+
+This guide presents information about BSP layers, defines a structure
+for components so that BSPs follow a commonly understood layout,
+discusses how to customize a recipe for a BSP, addresses BSP licensing,
+and provides information that shows you how to create a `BSP
+Layer <#bsp-layers>`__ using the
+```bitbake-layers`` <#creating-a-new-bsp-layer-using-the-bitbake-layers-script>`__
+tool.
+
+BSP Layers
+==========
+
+A BSP consists of a file structure inside a base directory.
+Collectively, you can think of the base directory, its file structure,
+and the contents as a BSP layer. Although not a strict requirement, BSP
+layers in the Yocto Project use the following well-established naming
+convention: meta-bsp_root_name The string "meta-" is prepended to the
+machine or platform name, which is bsp_root_name in the above form.
+
+.. note::
+
+   Because the BSP layer naming convention is well-established, it is
+   advisable to follow it when creating layers. Technically speaking, a
+   BSP layer name does not need to start with
+   meta-
+   . However, various scripts and tools in the Yocto Project development
+   environment assume this convention.
+
+To help understand the BSP layer concept, consider the BSPs that the
+Yocto Project supports and provides with each release. You can see the
+layers in the `Yocto Project Source
+Repositories <&YOCTO_DOCS_OM_URL;#yocto-project-repositories>`__ through
+a web interface at ` <&YOCTO_GIT_URL;>`__. If you go to that interface,
+you will find a list of repositories under "Yocto Metadata Layers".
+
+.. note::
+
+   Layers that are no longer actively supported as part of the Yocto
+   Project appear under the heading "Yocto Metadata Layer Archive."
+
+Each repository is a BSP layer supported by the Yocto Project (e.g.
+``meta-raspberrypi`` and ``meta-intel``). Each of these layers is a
+repository unto itself and clicking on the layer name displays two URLs
+from which you can clone the layer's repository to your local system.
+Here is an example that clones the Raspberry Pi BSP layer: $ git clone
+git://git.yoctoproject.org/meta-raspberrypi
+
+In addition to BSP layers, the ``meta-yocto-bsp`` layer is part of the
+shipped ``poky`` repository. The ``meta-yocto-bsp`` layer maintains
+several "reference" BSPs including the ARM-based Beaglebone, MIPS-based
+EdgeRouter, and generic versions of both 32-bit and 64-bit IA machines.
+
+For information on typical BSP development workflow, see the
+"`Developing a Board Support Package
+(BSP) <#developing-a-board-support-package-bsp>`__" section. For more
+information on how to set up a local copy of source files from a Git
+repository, see the "`Locating Yocto Project Source
+Files <&YOCTO_DOCS_DEV_URL;#locating-yocto-project-source-files>`__"
+section in the Yocto Project Development Tasks Manual.
+
+The BSP layer's base directory (``meta-bsp_root_name``) is the root
+directory of that Layer. This directory is what you add to the
+```BBLAYERS`` <&YOCTO_DOCS_REF_URL;#var-BBLAYERS>`__ variable in the
+``conf/bblayers.conf`` file found in your `Build
+Directory <&YOCTO_DOCS_REF_URL;#build-directory>`__, which is
+established after you run the OpenEmbedded build environment setup
+script (i.e. ````` <&YOCTO_DOCS_REF_URL;#structure-core-script>`__).
+Adding the root directory allows the `OpenEmbedded build
+system <&YOCTO_DOCS_REF_URL;#build-system-term>`__ to recognize the BSP
+layer and from it build an image. Here is an example: BBLAYERS ?= " \\
+/usr/local/src/yocto/meta \\ /usr/local/src/yocto/meta-poky \\
+/usr/local/src/yocto/meta-yocto-bsp \\ /usr/local/src/yocto/meta-mylayer
+\\ "
+
+.. note::
+
+   Ordering and
+   BBFILE_PRIORITY
+   for the layers listed in
+   BBLAYERS
+   matter. For example, if multiple layers define a machine
+   configuration, the OpenEmbedded build system uses the last layer
+   searched given similar layer priorities. The build system works from
+   the top-down through the layers listed in
+   BBLAYERS
+   .
+
+Some BSPs require or depend on additional layers beyond the BSP's root
+layer in order to be functional. In this case, you need to specify these
+layers in the ``README`` "Dependencies" section of the BSP's root layer.
+Additionally, if any build instructions exist for the BSP, you must add
+them to the "Dependencies" section.
+
+Some layers function as a layer to hold other BSP layers. These layers
+are knows as "`container
+layers <&YOCTO_DOCS_REF_URL;#term-container-layer>`__". An example of
+this type of layer is OpenEmbedded's
+```meta-openembedded`` <https://github.com/openembedded/meta-openembedded>`__
+layer. The ``meta-openembedded`` layer contains many ``meta-*`` layers.
+In cases like this, you need to include the names of the actual layers
+you want to work with, such as: BBLAYERS ?= " \\
+/usr/local/src/yocto/meta \\ /usr/local/src/yocto/meta-poky \\
+/usr/local/src/yocto/meta-yocto-bsp \\ /usr/local/src/yocto/meta-mylayer
+\\ .../meta-openembedded/meta-oe \\ .../meta-openembedded/meta-perl \\
+.../meta-openembedded/meta-networking \\ " and so on.
+
+For more information on layers, see the "`Understanding and Creating
+Layers <&YOCTO_DOCS_DEV_URL;#understanding-and-creating-layers>`__"
+section of the Yocto Project Development Tasks Manual.
+
+Preparing Your Build Host to Work With BSP Layers
+=================================================
+
+This section describes how to get your build host ready to work with BSP
+layers. Once you have the host set up, you can create the layer as
+described in the "`Creating a new BSP Layer Using the ``bitbake-layers``
+Script <#creating-a-new-bsp-layer-using-the-bitbake-layers-script>`__"
+section.
+
+.. note::
+
+   For structural information on BSPs, see the
+   Example Filesystem Layout
+   section.
+
+1. *Set Up the Build Environment:* Be sure you are set up to use BitBake
+   in a shell. See the "`Preparing the Build
+   Host <&YOCTO_DOCS_DEV_URL;#dev-preparing-the-build-host>`__" section
+   in the Yocto Project Development Tasks Manual for information on how
+   to get a build host ready that is either a native Linux machine or a
+   machine that uses CROPS.
+
+2. *Clone the ``poky`` Repository:* You need to have a local copy of the
+   Yocto Project `Source
+   Directory <&YOCTO_DOCS_REF_URL;#source-directory>`__ (i.e. a local
+   ``poky`` repository). See the "`Cloning the ``poky``
+   Repository <&YOCTO_DOCS_DEV_URL;#cloning-the-poky-repository>`__" and
+   possibly the "`Checking Out by Branch in
+   Poky <&YOCTO_DOCS_DEV_URL;#checking-out-by-branch-in-poky>`__" or
+   "`Checking Out by Tag in
+   Poky <&YOCTO_DOCS_DEV_URL;#checkout-out-by-tag-in-poky>`__" sections
+   all in the Yocto Project Development Tasks Manual for information on
+   how to clone the ``poky`` repository and check out the appropriate
+   branch for your work.
+
+3. *Determine the BSP Layer You Want:* The Yocto Project supports many
+   BSPs, which are maintained in their own layers or in layers designed
+   to contain several BSPs. To get an idea of machine support through
+   BSP layers, you can look at the `index of
+   machines <&YOCTO_RELEASE_DL_URL;/machines>`__ for the release.
+
+4. *Optionally Clone the ``meta-intel`` BSP Layer:* If your hardware is
+   based on current Intel CPUs and devices, you can leverage this BSP
+   layer. For details on the ``meta-intel`` BSP layer, see the layer's
+   ```README`` <http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/tree/README>`__
+   file.
+
+   1. *Navigate to Your Source Directory:* Typically, you set up the
+      ``meta-intel`` Git repository inside the `Source
+      Directory <&YOCTO_DOCS_REF_URL;#source-directory>`__ (e.g.
+      ``poky``). $ cd /home/you/poky
+
+   2. *Clone the Layer:* $ git clone
+      git://git.yoctoproject.org/meta-intel.git Cloning into
+      'meta-intel'... remote: Counting objects: 15585, done. remote:
+      Compressing objects: 100% (5056/5056), done. remote: Total 15585
+      (delta 9123), reused 15329 (delta 8867) Receiving objects: 100%
+      (15585/15585), 4.51 MiB \| 3.19 MiB/s, done. Resolving deltas:
+      100% (9123/9123), done. Checking connectivity... done.
+
+   3. *Check Out the Proper Branch:* The branch you check out for
+      ``meta-intel`` must match the same branch you are using for the
+      Yocto Project release (e.g. DISTRO_NAME_NO_CAP): $ cd meta-intel $
+      git checkout -b DISTRO_NAME_NO_CAP
+      remotes/origin/DISTRO_NAME_NO_CAP Branch DISTRO_NAME_NO_CAP set up
+      to track remote branch DISTRO_NAME_NO_CAP from origin. Switched to
+      a new branch 'DISTRO_NAME_NO_CAP'
+
+      .. note::
+
+         To see the available branch names in a cloned repository, use
+         the
+         git branch -al
+         command. See the "
+         Checking Out By Branch in Poky
+         " section in the Yocto Project Development Tasks Manual for
+         more information.
+
+5. *Optionally Set Up an Alternative BSP Layer:* If your hardware can be
+   more closely leveraged to an existing BSP not within the
+   ``meta-intel`` BSP layer, you can clone that BSP layer.
+
+   The process is identical to the process used for the ``meta-intel``
+   layer except for the layer's name. For example, if you determine that
+   your hardware most closely matches the ``meta-raspberrypi``, clone
+   that layer: $ git clone git://git.yoctoproject.org/meta-raspberrypi
+   Cloning into 'meta-raspberrypi'... remote: Counting objects: 4743,
+   done. remote: Compressing objects: 100% (2185/2185), done. remote:
+   Total 4743 (delta 2447), reused 4496 (delta 2258) Receiving objects:
+   100% (4743/4743), 1.18 MiB \| 0 bytes/s, done. Resolving deltas: 100%
+   (2447/2447), done. Checking connectivity... done.
+
+6. *Initialize the Build Environment:* While in the root directory of
+   the Source Directory (i.e. ``poky``), run the
+   ````` <&YOCTO_DOCS_REF_URL;#structure-core-script>`__ environment
+   setup script to define the OpenEmbedded build environment on your
+   build host. $ source OE_INIT_FILE Among other things, the script
+   creates the `Build
+   Directory <&YOCTO_DOCS_REF_URL;#build-directory>`__, which is
+   ``build`` in this case and is located in the `Source
+   Directory <&YOCTO_DOCS_REF_URL;#source-directory>`__. After the
+   script runs, your current working directory is set to the ``build``
+   directory.
+
+.. _bsp-filelayout:
+
+Example Filesystem Layout
+=========================
+
+Defining a common BSP directory structure allows end-users to understand
+and become familiar with that standard. A common format also encourages
+standardization of software support for hardware.
+
+The proposed form described in this section does have elements that are
+specific to the OpenEmbedded build system. It is intended that
+developers can use this structure with other build systems besides the
+OpenEmbedded build system. It is also intended that it will be be simple
+to extract information and convert it to other formats if required. The
+OpenEmbedded build system, through its standard `layers
+mechanism <&YOCTO_DOCS_OM_URL;#the-yocto-project-layer-model>`__, can
+directly accept the format described as a layer. The BSP layer captures
+all the hardware-specific details in one place using a standard format,
+which is useful for any person wishing to use the hardware platform
+regardless of the build system they are using.
+
+The BSP specification does not include a build system or other tools -
+the specification is concerned with the hardware-specific components
+only. At the end-distribution point, you can ship the BSP layer combined
+with a build system and other tools. Realize that it is important to
+maintain the distinction that the BSP layer, a build system, and tools
+are separate components that could be combined in certain end products.
+
+Before looking at the recommended form for the directory structure
+inside a BSP layer, you should be aware that some requirements do exist
+in order for a BSP layer to be considered compliant with the Yocto
+Project. For that list of requirements, see the "`Released BSP
+Requirements <#released-bsp-requirements>`__" section.
+
+Below is the typical directory structure for a BSP layer. While this
+basic form represents the standard, realize that the actual layout for
+individual BSPs could differ. meta-bsp_root_name/
+meta-bsp_root_name/bsp_license_file meta-bsp_root_name/README
+meta-bsp_root_name/README.sources
+meta-bsp_root_name/binary/bootable_images
+meta-bsp_root_name/conf/layer.conf
+meta-bsp_root_name/conf/machine/*.conf meta-bsp_root_name/recipes-bsp/\*
+meta-bsp_root_name/recipes-core/\*
+meta-bsp_root_name/recipes-graphics/\*
+meta-bsp_root_name/recipes-kernel/linux/linux-yocto_kernel_rev.bbappend
+
+Below is an example of the Raspberry Pi BSP layer that is available from
+the `Source Respositories <&YOCTO_GIT_URL;>`__:
+meta-raspberrypi/COPYING.MIT meta-raspberrypi/README.md
+meta-raspberrypi/classes
+meta-raspberrypi/classes/sdcard_image-rpi.bbclass meta-raspberrypi/conf/
+meta-raspberrypi/conf/layer.conf meta-raspberrypi/conf/machine/
+meta-raspberrypi/conf/machine/raspberrypi-cm.conf
+meta-raspberrypi/conf/machine/raspberrypi-cm3.conf
+meta-raspberrypi/conf/machine/raspberrypi.conf
+meta-raspberrypi/conf/machine/raspberrypi0-wifi.conf
+meta-raspberrypi/conf/machine/raspberrypi0.conf
+meta-raspberrypi/conf/machine/raspberrypi2.conf
+meta-raspberrypi/conf/machine/raspberrypi3-64.conf
+meta-raspberrypi/conf/machine/raspberrypi3.conf
+meta-raspberrypi/conf/machine/include
+meta-raspberrypi/conf/machine/include/rpi-base.inc
+meta-raspberrypi/conf/machine/include/rpi-default-providers.inc
+meta-raspberrypi/conf/machine/include/rpi-default-settings.inc
+meta-raspberrypi/conf/machine/include/rpi-default-versions.inc
+meta-raspberrypi/conf/machine/include/tune-arm1176jzf-s.inc
+meta-raspberrypi/docs meta-raspberrypi/docs/Makefile
+meta-raspberrypi/docs/conf.py meta-raspberrypi/docs/contributing.md
+meta-raspberrypi/docs/extra-apps.md
+meta-raspberrypi/docs/extra-build-config.md
+meta-raspberrypi/docs/index.rst meta-raspberrypi/docs/layer-contents.md
+meta-raspberrypi/docs/readme.md meta-raspberrypi/files
+meta-raspberrypi/files/custom-licenses
+meta-raspberrypi/files/custom-licenses/Broadcom
+meta-raspberrypi/recipes-bsp meta-raspberrypi/recipes-bsp/bootfiles
+meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
+meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
+meta-raspberrypi/recipes-bsp/common
+meta-raspberrypi/recipes-bsp/common/firmware.inc
+meta-raspberrypi/recipes-bsp/formfactor
+meta-raspberrypi/recipes-bsp/formfactor/formfactor
+meta-raspberrypi/recipes-bsp/formfactor/formfactor/raspberrypi
+meta-raspberrypi/recipes-bsp/formfactor/formfactor/raspberrypi/machconfig
+meta-raspberrypi/recipes-bsp/formfactor/formfactor_0.0.bbappend
+meta-raspberrypi/recipes-bsp/rpi-u-boot-src
+meta-raspberrypi/recipes-bsp/rpi-u-boot-src/files
+meta-raspberrypi/recipes-bsp/rpi-u-boot-src/files/boot.cmd.in
+meta-raspberrypi/recipes-bsp/rpi-u-boot-src/rpi-u-boot-scr.bb
+meta-raspberrypi/recipes-bsp/u-boot
+meta-raspberrypi/recipes-bsp/u-boot/u-boot
+meta-raspberrypi/recipes-bsp/u-boot/u-boot/*.patch
+meta-raspberrypi/recipes-bsp/u-boot/u-boot_%.bbappend
+meta-raspberrypi/recipes-connectivity
+meta-raspberrypi/recipes-connectivity/bluez5
+meta-raspberrypi/recipes-connectivity/bluez5/bluez5
+meta-raspberrypi/recipes-connectivity/bluez5/bluez5/*.patch
+meta-raspberrypi/recipes-connectivity/bluez5/bluez5/BCM43430A1.hcd
+meta-raspberrypi/recipes-connectivity/bluez5/bluez5brcm43438.service
+meta-raspberrypi/recipes-connectivity/bluez5/bluez5_%.bbappend
+meta-raspberrypi/recipes-core meta-raspberrypi/recipes-core/images
+meta-raspberrypi/recipes-core/images/rpi-basic-image.bb
+meta-raspberrypi/recipes-core/images/rpi-hwup-image.bb
+meta-raspberrypi/recipes-core/images/rpi-test-image.bb
+meta-raspberrypi/recipes-core/packagegroups
+meta-raspberrypi/recipes-core/packagegroups/packagegroup-rpi-test.bb
+meta-raspberrypi/recipes-core/psplash
+meta-raspberrypi/recipes-core/psplash/files
+meta-raspberrypi/recipes-core/psplash/files/psplash-raspberrypi-img.h
+meta-raspberrypi/recipes-core/psplash/psplash_git.bbappend
+meta-raspberrypi/recipes-core/udev
+meta-raspberrypi/recipes-core/udev/udev-rules-rpi
+meta-raspberrypi/recipes-core/udev/udev-rules-rpi/99-com.rules
+meta-raspberrypi/recipes-core/udev/udev-rules-rpi.bb
+meta-raspberrypi/recipes-devtools
+meta-raspberrypi/recipes-devtools/bcm2835
+meta-raspberrypi/recipes-devtools/bcm2835/bcm2835_1.52.bb
+meta-raspberrypi/recipes-devtools/pi-blaster
+meta-raspberrypi/recipes-devtools/pi-blaster/files
+meta-raspberrypi/recipes-devtools/pi-blaster/files/*.patch
+meta-raspberrypi/recipes-devtools/pi-blaster/pi-blaster_git.bb
+meta-raspberrypi/recipes-devtools/python
+meta-raspberrypi/recipes-devtools/python/python-rtimu
+meta-raspberrypi/recipes-devtools/python/python-rtimu/*.patch
+meta-raspberrypi/recipes-devtools/python/python-rtimu_git.bb
+meta-raspberrypi/recipes-devtools/python/python-sense-hat_2.2.0.bb
+meta-raspberrypi/recipes-devtools/python/rpi-gpio
+meta-raspberrypi/recipes-devtools/python/rpi-gpio/*.patch
+meta-raspberrypi/recipes-devtools/python/rpi-gpio_0.6.3.bb
+meta-raspberrypi/recipes-devtools/python/rpio
+meta-raspberrypi/recipes-devtools/python/rpio/*.patch
+meta-raspberrypi/recipes-devtools/python/rpio_0.10.0.bb
+meta-raspberrypi/recipes-devtools/wiringPi
+meta-raspberrypi/recipes-devtools/wiringPi/files
+meta-raspberrypi/recipes-devtools/wiringPi/files/*.patch
+meta-raspberrypi/recipes-devtools/wiringPi/wiringpi_git.bb
+meta-raspberrypi/recipes-graphics
+meta-raspberrypi/recipes-graphics/eglinfo
+meta-raspberrypi/recipes-graphics/eglinfo/eglinfo-fb_%.bbappend
+meta-raspberrypi/recipes-graphics/eglinfo/eglinfo-x11_%.bbappend
+meta-raspberrypi/recipes-graphics/mesa
+meta-raspberrypi/recipes-graphics/mesa/mesa-gl_%.bbappend
+meta-raspberrypi/recipes-graphics/mesa/mesa_%.bbappend
+meta-raspberrypi/recipes-graphics/userland
+meta-raspberrypi/recipes-graphics/userland/userland
+meta-raspberrypi/recipes-graphics/userland/userland/*.patch
+meta-raspberrypi/recipes-graphics/userland/userland_git.bb
+meta-raspberrypi/recipes-graphics/vc-graphics
+meta-raspberrypi/recipes-graphics/vc-graphics/files
+meta-raspberrypi/recipes-graphics/vc-graphics/files/egl.pc
+meta-raspberrypi/recipes-graphics/vc-graphics/files/vchiq.sh
+meta-raspberrypi/recipes-graphics/vc-graphics/vc-graphics-hardfp.bb
+meta-raspberrypi/recipes-graphics/vc-graphics/vc-graphics.bb
+meta-raspberrypi/recipes-graphics/vc-graphics/vc-graphics.inc
+meta-raspberrypi/recipes-graphics/wayland
+meta-raspberrypi/recipes-graphics/wayland/weston_%.bbappend
+meta-raspberrypi/recipes-graphics/xorg-xserver
+meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config
+meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi
+meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf
+meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d
+meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/10-evdev.conf
+meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/98-pitft.conf
+meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/99-calibration.conf
+meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
+meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
+meta-raspberrypi/recipes-kernel
+meta-raspberrypi/recipes-kernel/linux-firmware
+meta-raspberrypi/recipes-kernel/linux-firmware/files
+meta-raspberrypi/recipes-kernel/linux-firmware/files/brcmfmac43430-sdio.bin
+meta-raspberrypi/recipes-kernel/linux-firmware/files/brcfmac43430-sdio.txt
+meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
+meta-raspberrypi/recipes-kernel/linux
+meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb
+meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
+meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb
+meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.9.bb
+meta-raspberrypi/recipes-multimedia
+meta-raspberrypi/recipes-multimedia/gstreamer
+meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx
+meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx/*.patch
+meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx_%.bbappend
+meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
+meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx-1.12
+meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx-1.12/*.patch
+meta-raspberrypi/recipes-multimedia/omxplayer
+meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer
+meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer/*.patch
+meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer_git.bb
+meta-raspberrypi/recipes-multimedia/x264
+meta-raspberrypi/recipes-multimedia/x264/x264_git.bbappend
+meta-raspberrypi/wic meta-raspberrypi/wic/sdimage-raspberrypi.wks
+
+The following sections describe each part of the proposed BSP format.
+
+.. _bsp-filelayout-license:
+
+License Files
+-------------
+
+You can find these files in the BSP Layer at:
+meta-bsp_root_name/bsp_license_file
+
+These optional files satisfy licensing requirements for the BSP. The
+type or types of files here can vary depending on the licensing
+requirements. For example, in the Raspberry Pi BSP, all licensing
+requirements are handled with the ``COPYING.MIT`` file.
+
+Licensing files can be MIT, BSD, GPLv*, and so forth. These files are
+recommended for the BSP but are optional and totally up to the BSP
+developer. For information on how to maintain license compliance, see
+the "`Maintaining Open Source License Compliance During Your Product's
+Lifecycle <&YOCTO_DOCS_DEV_URL;#maintaining-open-source-license-compliance-during-your-products-lifecycle>`__"
+section in the Yocto Project Development Tasks Manual.
+
+.. _bsp-filelayout-readme:
+
+README File
+-----------
+
+You can find this file in the BSP Layer at: meta-bsp_root_name/README
+
+This file provides information on how to boot the live images that are
+optionally included in the ``binary/`` directory. The ``README`` file
+also provides information needed for building the image.
+
+At a minimum, the ``README`` file must contain a list of dependencies,
+such as the names of any other layers on which the BSP depends and the
+name of the BSP maintainer with his or her contact information.
+
+.. _bsp-filelayout-readme-sources:
+
+README.sources File
+-------------------
+
+You can find this file in the BSP Layer at:
+meta-bsp_root_name/README.sources
+
+This file provides information on where to locate the BSP source files
+used to build the images (if any) that reside in
+``meta-bsp_root_name/binary``. Images in the ``binary`` would be images
+released with the BSP. The information in the ``README.sources`` file
+also helps you find the `Metadata <&YOCTO_DOCS_REF_URL;#metadata>`__
+used to generate the images that ship with the BSP.
+
+.. note::
+
+   If the BSP's
+   binary
+   directory is missing or the directory has no images, an existing
+   README.sources
+   file is meaningless and usually does not exist.
+
+.. _bsp-filelayout-binary:
+
+Pre-built User Binaries
+-----------------------
+
+You can find these files in the BSP Layer at:
+meta-bsp_root_name/binary/bootable_images
+
+This optional area contains useful pre-built kernels and user-space
+filesystem images released with the BSP that are appropriate to the
+target system. This directory typically contains graphical (e.g. Sato)
+and minimal live images when the BSP tarball has been created and made
+available in the `Yocto Project <&YOCTO_HOME_URL;>`__ website. You can
+use these kernels and images to get a system running and quickly get
+started on development tasks.
+
+The exact types of binaries present are highly hardware-dependent. The
+```README`` <#bsp-filelayout-readme>`__ file should be present in the
+BSP Layer and it explains how to use the images with the target
+hardware. Additionally, the
+```README.sources`` <#bsp-filelayout-readme-sources>`__ file should be
+present to locate the sources used to build the images and provide
+information on the Metadata.
+
+.. _bsp-filelayout-layer:
+
+Layer Configuration File
+------------------------
+
+You can find this file in the BSP Layer at:
+meta-bsp_root_name/conf/layer.conf
+
+The ``conf/layer.conf`` file identifies the file structure as a layer,
+identifies the contents of the layer, and contains information about how
+the build system should use it. Generally, a standard boilerplate file
+such as the following works. In the following example, you would replace
+bsp with the actual name of the BSP (i.e. bsp_root_name from the example
+template).
+
+# We have a conf and classes directory, add to BBPATH BBPATH .=
+":${LAYERDIR}" # We have a recipes directory, add to BBFILES BBFILES +=
+"${LAYERDIR}/recipes-*/*/*.bb \\ ${LAYERDIR}/recipes-*/*/*.bbappend"
+BBFILE_COLLECTIONS += "bsp" BBFILE_PATTERN_bsp = "^${LAYERDIR}/"
+BBFILE_PRIORITY_bsp = "6" LAYERDEPENDS_bsp = "intel"
+
+To illustrate the string substitutions, here are the corresponding
+statements from the Raspberry Pi ``conf/layer.conf`` file: # We have a
+conf and classes directory, append to BBPATH BBPATH .= ":${LAYERDIR}" #
+We have a recipes directory containing .bb and .bbappend files, add to
+BBFILES BBFILES += "${LAYERDIR}/recipes*/*/*.bb \\
+${LAYERDIR}/recipes*/*/*.bbappend" BBFILE_COLLECTIONS += "raspberrypi"
+BBFILE_PATTERN_raspberrypi := "^${LAYERDIR}/"
+BBFILE_PRIORITY_raspberrypi = "9" # Additional license directories.
+LICENSE_PATH += "${LAYERDIR}/files/custom-licenses" . . .
+
+This file simply makes `BitBake <&YOCTO_DOCS_REF_URL;#bitbake-term>`__
+aware of the recipes and configuration directories. The file must exist
+so that the OpenEmbedded build system can recognize the BSP.
+
+.. _bsp-filelayout-machine:
+
+Hardware Configuration Options
+------------------------------
+
+You can find these files in the BSP Layer at:
+meta-bsp_root_name/conf/machine/*.conf
+
+The machine files bind together all the information contained elsewhere
+in the BSP into a format that the build system can understand. Each BSP
+Layer requires at least one machine file. If the BSP supports multiple
+machines, multiple machine configuration files can exist. These
+filenames correspond to the values to which users have set the
+```MACHINE`` <&YOCTO_DOCS_REF_URL;#var-MACHINE>`__ variable.
+
+These files define things such as the kernel package to use
+(```PREFERRED_PROVIDER`` <&YOCTO_DOCS_REF_URL;#var-PREFERRED_PROVIDER>`__
+of
+`virtual/kernel <&YOCTO_DOCS_DEV_URL;#metadata-virtual-providers>`__),
+the hardware drivers to include in different types of images, any
+special software components that are needed, any bootloader information,
+and also any special image format requirements.
+
+This configuration file could also include a hardware "tuning" file that
+is commonly used to define the package architecture and specify
+optimization flags, which are carefully chosen to give best performance
+on a given processor.
+
+Tuning files are found in the ``meta/conf/machine/include`` directory
+within the `Source Directory <&YOCTO_DOCS_REF_URL;#source-directory>`__.
+For example, many ``tune-*`` files (e.g. ``tune-arm1136jf-s.inc``,
+``tune-1586-nlp.inc``, and so forth) reside in the
+``poky/meta/conf/machine/include`` directory.
+
+To use an include file, you simply include them in the machine
+configuration file. For example, the Raspberry Pi BSP
+``raspberrypi3.conf`` contains the following statement: include
+conf/machine/include/rpi-base.inc
+
+.. _bsp-filelayout-misc-recipes:
+
+Miscellaneous BSP-Specific Recipe Files
+---------------------------------------
+
+You can find these files in the BSP Layer at:
+meta-bsp_root_name/recipes-bsp/\*
+
+This optional directory contains miscellaneous recipe files for the BSP.
+Most notably would be the formfactor files. For example, in the
+Raspberry Pi BSP, there is the ``formfactor_0.0.bbappend`` file, which
+is an append file used to augment the recipe that starts the build.
+Furthermore, there are machine-specific settings used during the build
+that are defined by the ``machconfig`` file further down in the
+directory. Here is the ``machconfig`` file for the Raspberry Pi BSP:
+HAVE_TOUCHSCREEN=0 HAVE_KEYBOARD=1 DISPLAY_CAN_ROTATE=0
+DISPLAY_ORIENTATION=0 DISPLAY_DPI=133
+
+.. note::
+
+   If a BSP does not have a formfactor entry, defaults are established
+   according to the formfactor configuration file that is installed by
+   the main formfactor recipe
+   ``meta/recipes-bsp/formfactor/formfactor_0.0.bb``, which is found in
+   the `Source Directory <&YOCTO_DOCS_REF_URL;#source-directory>`__.
+
+.. _bsp-filelayout-recipes-graphics:
+
+Display Support Files
+---------------------
+
+You can find these files in the BSP Layer at:
+meta-bsp_root_name/recipes-graphics/\*
+
+This optional directory contains recipes for the BSP if it has special
+requirements for graphics support. All files that are needed for the BSP
+to support a display are kept here.
+
+.. _bsp-filelayout-kernel:
+
+Linux Kernel Configuration
+--------------------------
+
+You can find these files in the BSP Layer at:
+meta-bsp_root_name/recipes-kernel/linux/linux*.bbappend
+meta-bsp_root_name/recipes-kernel/linux/*.bb
+
+Append files (``*.bbappend``) modify the main kernel recipe being used
+to build the image. The ``*.bb`` files would be a developer-supplied
+kernel recipe. This area of the BSP hierarchy can contain both these
+types of files although, in practice, it is likely that you would have
+one or the other.
+
+For your BSP, you typically want to use an existing Yocto Project kernel
+recipe found in the `Source
+Directory <&YOCTO_DOCS_REF_URL;#source-directory>`__ at
+``meta/recipes-kernel/linux``. You can append machine-specific changes
+to the kernel recipe by using a similarly named append file, which is
+located in the BSP Layer for your target device (e.g. the
+``meta-bsp_root_name/recipes-kernel/linux`` directory).
+
+Suppose you are using the ``linux-yocto_4.4.bb`` recipe to build the
+kernel. In other words, you have selected the kernel in your
+bsp_root_name\ ``.conf`` file by adding
+```PREFERRED_PROVIDER`` <&YOCTO_DOCS_REF_URL;#var-PREFERRED_PROVIDER>`__
+and
+```PREFERRED_VERSION`` <&YOCTO_DOCS_REF_URL;#var-PREFERRED_VERSION>`__
+statements as follows: PREFERRED_PROVIDER_virtual/kernel ?=
+"linux-yocto" PREFERRED_VERSION_linux-yocto ?= "4.4%"
+
+.. note::
+
+   When the preferred provider is assumed by default, the
+   PREFERRED_PROVIDER
+   statement does not appear in the
+   bsp_root_name
+   .conf
+   file.
+
+You would use the ``linux-yocto_4.4.bbappend`` file to append specific
+BSP settings to the kernel, thus configuring the kernel for your
+particular BSP.
+
+You can find more information on what your append file should contain in
+the "`Creating the Append
+File <&YOCTO_DOCS_KERNEL_DEV_URL;#creating-the-append-file>`__" section
+in the Yocto Project Linux Kernel Development Manual.
+
+An alternate scenario is when you create your own kernel recipe for the
+BSP. A good example of this is the Raspberry Pi BSP. If you examine the
+``recipes-kernel/linux`` directory you see the following:
+linux-raspberrypi-dev.bb linux-raspberrypi.inc linux-raspberrypi_4.14.bb
+linux-raspberrypi_4.9.bb The directory contains three kernel recipes and
+a common include file.
+
+Developing a Board Support Package (BSP)
+========================================
+
+This section describes the high-level procedure you can follow to create
+a BSP. Although not required for BSP creation, the ``meta-intel``
+repository, which contains many BSPs supported by the Yocto Project, is
+part of the example.
+
+For an example that shows how to create a new layer using the tools, see
+the "`Creating a New BSP Layer Using the ``bitbake-layers``
+Script <#creating-a-new-bsp-layer-using-the-bitbake-layers-script>`__"
+section.
+
+The following illustration and list summarize the BSP creation general
+workflow.
+
+1. *Set up Your Host Development System to Support Development Using the
+   Yocto Project*: See the "`Preparing the Build
+   Host <&YOCTO_DOCS_DEV_URL;#dev-preparing-the-build-host>`__" section
+   in the Yocto Project Development Tasks Manual for options on how to
+   get a system ready to use the Yocto Project.
+
+2. *Establish the ``meta-intel`` Repository on Your System:* Having
+   local copies of these supported BSP layers on your system gives you
+   access to layers you might be able to leverage when creating your
+   BSP. For information on how to get these files, see the "`Preparing
+   Your Build Host to Work with BSP
+   Layers <#preparing-your-build-host-to-work-with-bsp-layers>`__"
+   section.
+
+3. *Create Your Own BSP Layer Using the ``bitbake-layers`` Script:*
+   Layers are ideal for isolating and storing work for a given piece of
+   hardware. A layer is really just a location or area in which you
+   place the recipes and configurations for your BSP. In fact, a BSP is,
+   in itself, a special type of layer. The simplest way to create a new
+   BSP layer that is compliant with the Yocto Project is to use the
+   ``bitbake-layers`` script. For information about that script, see the
+   "`Creating a New BSP Layer Using the ``bitbake-layers``
+   Script <#creating-a-new-bsp-layer-using-the-bitbake-layers-script>`__"
+   section.
+
+   Another example that illustrates a layer is an application. Suppose
+   you are creating an application that has library or other
+   dependencies in order for it to compile and run. The layer, in this
+   case, would be where all the recipes that define those dependencies
+   are kept. The key point for a layer is that it is an isolated area
+   that contains all the relevant information for the project that the
+   OpenEmbedded build system knows about. For more information on
+   layers, see the "`The Yocto Project Layer
+   Model <&YOCTO_DOCS_OM_URL;#the-yocto-project-layer-model>`__" section
+   in the Yocto Project Overview and Concepts Manual. You can also
+   reference the "`Understanding and Creating
+   Layers <&YOCTO_DOCS_DEV_URL;#understanding-and-creating-layers>`__"
+   section in the Yocto Project Development Tasks Manual. For more
+   information on BSP layers, see the "`BSP Layers <#bsp-layers>`__"
+   section.
+
+   .. note::
+
+      -  Five hardware reference BSPs exist that are part of the Yocto
+         Project release and are located in the ``poky/meta-yocto-bsp``
+         BSP layer:
+
+         -  Texas Instruments Beaglebone (``beaglebone-yocto``)
+
+         -  Ubiquiti Networks EdgeRouter Lite (``edgerouter``)
+
+         -  Two general IA platforms (``genericx86`` and
+            ``genericx86-64``)
+
+      -  Three core Intel BSPs exist as part of the Yocto Project
+         release in the ``meta-intel`` layer:
+
+         -  ``intel-core2-32``, which is a BSP optimized for the Core2
+            family of CPUs as well as all CPUs prior to the Silvermont
+            core.
+
+         -  ``intel-corei7-64``, which is a BSP optimized for Nehalem
+            and later Core and Xeon CPUs as well as Silvermont and later
+            Atom CPUs, such as the Baytrail SoCs.
+
+         -  ``intel-quark``, which is a BSP optimized for the Intel
+            Galileo gen1 & gen2 development boards.
+
+   When you set up a layer for a new BSP, you should follow a standard
+   layout. This layout is described in the "`Example Filesystem
+   Layout <#bsp-filelayout>`__" section. In the standard layout, notice
+   the suggested structure for recipes and configuration information.
+   You can see the standard layout for a BSP by examining any supported
+   BSP found in the ``meta-intel`` layer inside the Source Directory.
+
+4. *Make Configuration Changes to Your New BSP Layer:* The standard BSP
+   layer structure organizes the files you need to edit in ``conf`` and
+   several ``recipes-*`` directories within the BSP layer. Configuration
+   changes identify where your new layer is on the local system and
+   identifies the kernel you are going to use. When you run the
+   ``bitbake-layers`` script, you are able to interactively configure
+   many things for the BSP (e.g. keyboard, touchscreen, and so forth).
+
+5. *Make Recipe Changes to Your New BSP Layer:* Recipe changes include
+   altering recipes (``*.bb`` files), removing recipes you do not use,
+   and adding new recipes or append files (``.bbappend``) that support
+   your hardware.
+
+6. *Prepare for the Build:* Once you have made all the changes to your
+   BSP layer, there remains a few things you need to do for the
+   OpenEmbedded build system in order for it to create your image. You
+   need to get the build environment ready by sourcing an environment
+   setup script (i.e. ``oe-init-build-env``) and you need to be sure two
+   key configuration files are configured appropriately: the
+   ``conf/local.conf`` and the ``conf/bblayers.conf`` file. You must
+   make the OpenEmbedded build system aware of your new layer. See the
+   "`Enabling Your Layer <&YOCTO_DOCS_DEV_URL;#enabling-your-layer>`__"
+   section in the Yocto Project Development Tasks Manual for information
+   on how to let the build system know about your new layer.
+
+7. *Build the Image:* The OpenEmbedded build system uses the BitBake
+   tool to build images based on the type of image you want to create.
+   You can find more information about BitBake in the `BitBake User
+   Manual <&YOCTO_DOCS_BB_URL;>`__.
+
+   The build process supports several types of images to satisfy
+   different needs. See the
+   "`Images <&YOCTO_DOCS_REF_URL;#ref-images>`__" chapter in the Yocto
+   Project Reference Manual for information on supported images.
+
+Requirements and Recommendations for Released BSPs
+==================================================
+
+Certain requirements exist for a released BSP to be considered compliant
+with the Yocto Project. Additionally, recommendations also exist. This
+section describes the requirements and recommendations for released
+BSPs.
+
+Released BSP Requirements
+-------------------------
+
+Before looking at BSP requirements, you should consider the following:
+
+-  The requirements here assume the BSP layer is a well-formed, "legal"
+   layer that can be added to the Yocto Project. For guidelines on
+   creating a layer that meets these base requirements, see the "`BSP
+   Layers <#bsp-layers>`__" section in this manual and the
+   "`Understanding and Creating
+   Layers" <&YOCTO_DOCS_DEV_URL;#understanding-and-creating-layers>`__"
+   section in the Yocto Project Development Tasks Manual.
+
+-  The requirements in this section apply regardless of how you package
+   a BSP. You should consult the packaging and distribution guidelines
+   for your specific release process. For an example of packaging and
+   distribution requirements, see the "`Third Party BSP Release
+   Process <https://wiki.yoctoproject.org/wiki/Third_Party_BSP_Release_Process>`__"
+   wiki page.
+
+-  The requirements for the BSP as it is made available to a developer
+   are completely independent of the released form of the BSP. For
+   example, the BSP Metadata can be contained within a Git repository
+   and could have a directory structure completely different from what
+   appears in the officially released BSP layer.
+
+-  It is not required that specific packages or package modifications
+   exist in the BSP layer, beyond the requirements for general
+   compliance with the Yocto Project. For example, no requirement exists
+   dictating that a specific kernel or kernel version be used in a given
+   BSP.
+
+Following are the requirements for a released BSP that conform to the
+Yocto Project:
+
+-  *Layer Name:* The BSP must have a layer name that follows the Yocto
+   Project standards. For information on BSP layer names, see the "`BSP
+   Layers <#bsp-layers>`__" section.
+
+-  *File System Layout:* When possible, use the same directory names in
+   your BSP layer as listed in the ``recipes.txt`` file, which is found
+   in ``poky/meta`` directory of the `Source
+   Directory <&YOCTO_DOCS_REF_URL;#source-directory>`__ or in the
+   OpenEmbedded-Core Layer (``openembedded-core``) at
+   ` <http://git.openembedded.org/openembedded-core/tree/meta>`__.
+
+   You should place recipes (``*.bb`` files) and recipe modifications
+   (``*.bbappend`` files) into ``recipes-*`` subdirectories by
+   functional area as outlined in ``recipes.txt``. If you cannot find a
+   category in ``recipes.txt`` to fit a particular recipe, you can make
+   up your own ``recipes-*`` subdirectory.
+
+   Within any particular ``recipes-*`` category, the layout should match
+   what is found in the OpenEmbedded-Core Git repository
+   (``openembedded-core``) or the Source Directory (``poky``). In other
+   words, make sure you place related files in appropriately-related
+   ``recipes-*`` subdirectories specific to the recipe's function, or
+   within a subdirectory containing a set of closely-related recipes.
+   The recipes themselves should follow the general guidelines for
+   recipes used in the Yocto Project found in the "`OpenEmbedded Style
+   Guide <http://openembedded.org/wiki/Styleguide>`__".
+
+-  *License File:* You must include a license file in the
+   ``meta-``\ bsp_root_name directory. This license covers the BSP
+   Metadata as a whole. You must specify which license to use since no
+   default license exists when one is not specified. See the
+   ```COPYING.MIT`` <&YOCTO_GIT_URL;/cgit.cgi/meta-raspberrypi/tree/COPYING.MIT>`__
+   file for the Raspberry Pi BSP in the ``meta-raspberrypi`` BSP layer
+   as an example.
+
+-  *README File:* You must include a ``README`` file in the
+   ``meta-``\ bsp_root_name directory. See the
+   ```README.md`` <&YOCTO_GIT_URL;/cgit.cgi/meta-raspberrypi/tree/README.md>`__
+   file for the Raspberry Pi BSP in the ``meta-raspberrypi`` BSP layer
+   as an example.
+
+   At a minimum, the ``README`` file should contain the following:
+
+   -  A brief description of the target hardware.
+
+   -  A list of all the dependencies of the BSP. These dependencies are
+      typically a list of required layers needed to build the BSP.
+      However, the dependencies should also contain information
+      regarding any other dependencies the BSP might have.
+
+   -  Any required special licensing information. For example, this
+      information includes information on special variables needed to
+      satisfy a EULA, or instructions on information needed to build or
+      distribute binaries built from the BSP Metadata.
+
+   -  The name and contact information for the BSP layer maintainer.
+      This is the person to whom patches and questions should be sent.
+      For information on how to find the right person, see the
+      "`Submitting a Change to the Yocto
+      Project <&YOCTO_DOCS_DEV_URL;#how-to-submit-a-change>`__" section
+      in the Yocto Project Development Tasks Manual.
+
+   -  Instructions on how to build the BSP using the BSP layer.
+
+   -  Instructions on how to boot the BSP build from the BSP layer.
+
+   -  Instructions on how to boot the binary images contained in the
+      ``binary`` directory, if present.
+
+   -  Information on any known bugs or issues that users should know
+      about when either building or booting the BSP binaries.
+
+-  *README.sources File:* If you BSP contains binary images in the
+   ``binary`` directory, you must include a ``README.sources`` file in
+   the ``meta-``\ bsp_root_name directory. This file specifies exactly
+   where you can find the sources used to generate the binary images.
+
+-  *Layer Configuration File:* You must include a ``conf/layer.conf``
+   file in the ``meta-``\ bsp_root_name directory. This file identifies
+   the ``meta-``\ bsp_root_name BSP layer as a layer to the build
+   system.
+
+-  *Machine Configuration File:* You must include one or more
+   ``conf/machine/``\ bsp_root_name\ ``.conf`` files in the
+   ``meta-``\ bsp_root_name directory. These configuration files define
+   machine targets that can be built using the BSP layer. Multiple
+   machine configuration files define variations of machine
+   configurations that the BSP supports. If a BSP supports multiple
+   machine variations, you need to adequately describe each variation in
+   the BSP ``README`` file. Do not use multiple machine configuration
+   files to describe disparate hardware. If you do have very different
+   targets, you should create separate BSP layers for each target.
+
+   .. note::
+
+      It is completely possible for a developer to structure the working
+      repository as a conglomeration of unrelated BSP files, and to
+      possibly generate BSPs targeted for release from that directory
+      using scripts or some other mechanism (e.g.
+      meta-yocto-bsp
+      layer). Such considerations are outside the scope of this
+      document.
+
+Released BSP Recommendations
+----------------------------
+
+Following are recommendations for released BSPs that conform to the
+Yocto Project:
+
+-  *Bootable Images:* Released BSPs can contain one or more bootable
+   images. Including bootable images allows users to easily try out the
+   BSP using their own hardware.
+
+   In some cases, it might not be convenient to include a bootable
+   image. If so, you might want to make two versions of the BSP
+   available: one that contains binary images, and one that does not.
+   The version that does not contain bootable images avoids unnecessary
+   download times for users not interested in the images.
+
+   If you need to distribute a BSP and include bootable images or build
+   kernel and filesystems meant to allow users to boot the BSP for
+   evaluation purposes, you should put the images and artifacts within a
+   ``binary/`` subdirectory located in the ``meta-``\ bsp_root_name
+   directory.
+
+   .. note::
+
+      If you do include a bootable image as part of the BSP and the
+      image was built by software covered by the GPL or other open
+      source licenses, it is your responsibility to understand and meet
+      all licensing requirements, which could include distribution of
+      source files.
+
+-  *Use a Yocto Linux Kernel:* Kernel recipes in the BSP should be based
+   on a Yocto Linux kernel. Basing your recipes on these kernels reduces
+   the costs for maintaining the BSP and increases its scalability. See
+   the ``Yocto Linux Kernel`` category in the `Source
+   Repositories <&YOCTO_GIT_URL;>`__ for these kernels.
+
+Customizing a Recipe for a BSP
+==============================
+
+If you plan on customizing a recipe for a particular BSP, you need to do
+the following:
+
+-  Create a ``*.bbappend`` file for the modified recipe. For information
+   on using append files, see the "`Using .bbappend Files in Your
+   Layer <&YOCTO_DOCS_DEV_URL;#using-bbappend-files>`__" section in the
+   Yocto Project Development Tasks Manual.
+
+-  Ensure your directory structure in the BSP layer that supports your
+   machine is such that the OpenEmbedded build system can find it. See
+   the example later in this section for more information.
+
+-  Put the append file in a directory whose name matches the machine's
+   name and is located in an appropriate sub-directory inside the BSP
+   layer (i.e. ``recipes-bsp``, ``recipes-graphics``, ``recipes-core``,
+   and so forth).
+
+-  Place the BSP-specific files in the proper directory inside the BSP
+   layer. How expansive the layer is affects where you must place these
+   files. For example, if your layer supports several different machine
+   types, you need to be sure your layer's directory structure includes
+   hierarchy that separates the files according to machine. If your
+   layer does not support multiple machines, the layer would not have
+   that additional hierarchy and the files would obviously not be able
+   to reside in a machine-specific directory.
+
+Following is a specific example to help you better understand the
+process. This example customizes customizes a recipe by adding a
+BSP-specific configuration file named ``interfaces`` to the
+``init-ifupdown_1.0.bb`` recipe for machine "xyz" where the BSP layer
+also supports several other machines:
+
+1. Edit the ``init-ifupdown_1.0.bbappend`` file so that it contains the
+   following: FILESEXTRAPATHS_prepend := "${THISDIR}/files:" The append
+   file needs to be in the ``meta-xyz/recipes-core/init-ifupdown``
+   directory.
+
+2. Create and place the new ``interfaces`` configuration file in the
+   BSP's layer here:
+   meta-xyz/recipes-core/init-ifupdown/files/xyz-machine-one/interfaces
+
+   .. note::
+
+      If the
+      meta-xyz
+      layer did not support multiple machines, you would place the
+      interfaces
+      configuration file in the layer here:
+      ::
+
+              meta-xyz/recipes-core/init-ifupdown/files/interfaces
+                             
+
+   The
+   ```FILESEXTRAPATHS`` <&YOCTO_DOCS_REF_URL;#var-FILESEXTRAPATHS>`__
+   variable in the append files extends the search path the build system
+   uses to find files during the build. Consequently, for this example
+   you need to have the ``files`` directory in the same location as your
+   append file.
+
+BSP Licensing Considerations
+============================
+
+In some cases, a BSP contains separately-licensed Intellectual Property
+(IP) for a component or components. For these cases, you are required to
+accept the terms of a commercial or other type of license that requires
+some kind of explicit End User License Agreement (EULA). Once you accept
+the license, the OpenEmbedded build system can then build and include
+the corresponding component in the final BSP image. If the BSP is
+available as a pre-built image, you can download the image after
+agreeing to the license or EULA.
+
+You could find that some separately-licensed components that are
+essential for normal operation of the system might not have an
+unencumbered (or free) substitute. Without these essential components,
+the system would be non-functional. Then again, you might find that
+other licensed components that are simply 'good-to-have' or purely
+elective do have an unencumbered, free replacement component that you
+can use rather than agreeing to the separately-licensed component. Even
+for components essential to the system, you might find an unencumbered
+component that is not identical but will work as a less-capable version
+of the licensed version in the BSP recipe.
+
+For cases where you can substitute a free component and still maintain
+the system's functionality, the "DOWNLOADS" selection from the
+"SOFTWARE" tab on the `Yocto Project website <&YOCTO_HOME_URL;>`__ makes
+available de-featured BSPs that are completely free of any IP
+encumbrances. For these cases, you can use the substitution directly and
+without any further licensing requirements. If present, these fully
+de-featured BSPs are named appropriately different as compared to the
+names of their respective encumbered BSPs. If available, these
+substitutions are your simplest and most preferred options. Obviously,
+use of these substitutions assumes the resulting functionality meets
+system requirements.
+
+.. note::
+
+   If however, a non-encumbered version is unavailable or it provides
+   unsuitable functionality or quality, you can use an encumbered
+   version.
+
+A couple different methods exist within the OpenEmbedded build system to
+satisfy the licensing requirements for an encumbered BSP. The following
+list describes them in order of preference:
+
+1. *Use
+   the*\ ```LICENSE_FLAGS`` <&YOCTO_DOCS_REF_URL;#var-LICENSE_FLAGS>`__\ *Variable
+   to Define the Recipes that Have Commercial or Other Types of
+   Specially-Licensed Packages:* For each of those recipes, you can
+   specify a matching license string in a ``local.conf`` variable named
+   ```LICENSE_FLAGS_WHITELIST`` <&YOCTO_DOCS_REF_URL;#var-LICENSE_FLAGS_WHITELIST>`__.
+   Specifying the matching license string signifies that you agree to
+   the license. Thus, the build system can build the corresponding
+   recipe and include the component in the image. See the "`Enabling
+   Commercially Licensed
+   Recipes <&YOCTO_DOCS_DEV_URL;#enabling-commercially-licensed-recipes>`__"
+   section in the Yocto Project Development Tasks Manual for details on
+   how to use these variables.
+
+   If you build as you normally would, without specifying any recipes in
+   the ``LICENSE_FLAGS_WHITELIST``, the build stops and provides you
+   with the list of recipes that you have tried to include in the image
+   that need entries in the ``LICENSE_FLAGS_WHITELIST``. Once you enter
+   the appropriate license flags into the whitelist, restart the build
+   to continue where it left off. During the build, the prompt will not
+   appear again since you have satisfied the requirement.
+
+   Once the appropriate license flags are on the white list in the
+   ``LICENSE_FLAGS_WHITELIST`` variable, you can build the encumbered
+   image with no change at all to the normal build process.
+
+2. *Get a Pre-Built Version of the BSP:* You can get this type of BSP by
+   selecting the "DOWNLOADS" item from the "SOFTWARE" tab on the `Yocto
+   Project website <&YOCTO_HOME_URL;>`__. You can download BSP tarballs
+   that contain proprietary components after agreeing to the licensing
+   requirements of each of the individually encumbered packages as part
+   of the download process. Obtaining the BSP this way allows you to
+   access an encumbered image immediately after agreeing to the
+   click-through license agreements presented by the website. If you
+   want to build the image yourself using the recipes contained within
+   the BSP tarball, you will still need to create an appropriate
+   ``LICENSE_FLAGS_WHITELIST`` to match the encumbered recipes in the
+   BSP.
+
+.. note::
+
+   Pre-compiled images are bundled with a time-limited kernel that runs
+   for a predetermined amount of time (10 days) before it forces the
+   system to reboot. This limitation is meant to discourage direct
+   redistribution of the image. You must eventually rebuild the image if
+   you want to remove this restriction.
+
+Creating a new BSP Layer Using the ``bitbake-layers`` Script
+============================================================
+
+The ``bitbake-layers create-layer`` script automates creating a BSP
+layer. What makes a layer a "BSP layer" is the presence of at least one
+machine configuration file. Additionally, a BSP layer usually has a
+kernel recipe or an append file that leverages off an existing kernel
+recipe. The primary requirement, however, is the machine configuration.
+
+Use these steps to create a BSP layer:
+
+-  *Create a General Layer:* Use the ``bitbake-layers`` script with the
+   ``create-layer`` subcommand to create a new general layer. For
+   instructions on how to create a general layer using the
+   ``bitbake-layers`` script, see the "`Creating a General Layer Using
+   the ``bitbake-layers``
+   Script <&YOCTO_DOCS_DEV_URL;#creating-a-general-layer-using-the-bitbake-layers-script>`__"
+   section in the Yocto Project Development Tasks Manual.
+
+-  *Create a Layer Configuration File:* Every layer needs a layer
+   configuration file. This configuration file establishes locations for
+   the layer's recipes, priorities for the layer, and so forth. You can
+   find examples of ``layer.conf`` files in the Yocto Project `Source
+   Repositories <&YOCTO_GIT_URL;>`__. To get examples of what you need
+   in your configuration file, locate a layer (e.g. "meta-ti") and
+   examine the
+   ` <&YOCTO_GIT_URL;/cgit/cgit.cgi/meta-ti/tree/conf/layer.conf>`__
+   file.
+
+-  *Create a Machine Configuration File:* Create a
+   ``conf/machine/``\ bsp_root_name\ ``.conf`` file. See
+   ```meta-yocto-bsp/conf/machine`` <&YOCTO_GIT_URL;/cgit/cgit.cgi/poky/tree/meta-yocto-bsp/conf/machine>`__
+   for sample bsp_root_name\ ``.conf`` files. Other samples such as
+   ```meta-ti`` <&YOCTO_GIT_URL;/cgit/cgit.cgi/meta-ti/tree/conf/machine>`__
+   and
+   ```meta-freescale`` <&YOCTO_GIT_URL;/cgit/cgit.cgi/meta-freescale/tree/conf/machine>`__
+   exist from other vendors that have more specific machine and tuning
+   examples.
+
+-  *Create a Kernel Recipe:* Create a kernel recipe in
+   ``recipes-kernel/linux`` by either using a kernel append file or a
+   new custom kernel recipe file (e.g. ``yocto-linux_4.12.bb``). The BSP
+   layers mentioned in the previous step also contain different kernel
+   examples. See the "`Modifying an Existing
+   Recipe <&YOCTO_DOCS_KERNEL_DEV_URL;#modifying-an-existing-recipe>`__"
+   section in the Yocto Project Linux Kernel Development Manual for
+   information on how to create a custom kernel.
+
+The remainder of this section provides a description of the Yocto
+Project reference BSP for Beaglebone, which resides in the
+```meta-yocto-bsp`` <&YOCTO_GIT_URL;/cgit/cgit.cgi/poky/tree/meta-yocto-bsp>`__
+layer.
+
+BSP Layer Configuration Example
+-------------------------------
+
+The layer's ``conf`` directory contains the ``layer.conf`` configuration
+file. In this example, the ``conf/layer.conf`` is the following: # We
+have a conf and classes directory, add to BBPATH BBPATH .=
+":${LAYERDIR}" # We have recipes-\* directories, add to BBFILES BBFILES
++= "${LAYERDIR}/recipes-*/*/*.bb \\ ${LAYERDIR}/recipes-*/*/*.bbappend"
+BBFILE_COLLECTIONS += "yoctobsp" BBFILE_PATTERN_yoctobsp =
+"^${LAYERDIR}/" BBFILE_PRIORITY_yoctobsp = "5" LAYERVERSION_yoctobsp =
+"4" LAYERSERIES_COMPAT_yoctobsp = "DISTRO_NAME_NO_CAP" The variables
+used in this file configure the layer. A good way to learn about layer
+configuration files is to examine various files for BSP from the `Source
+Repositories <&YOCTO_GIT_URL;>`__.
+
+For a detailed description of this particular layer configuration file,
+see "`step 3 <&YOCTO_DOCS_DEV_URL;#dev-layer-config-file-description>`__
+in the discussion that describes how to create layers in the Yocto
+Project Development Tasks Manual.
+
+BSP Machine Configuration Example
+---------------------------------
+
+As mentioned earlier in this section, the existence of a machine
+configuration file is what makes a layer a BSP layer as compared to a
+general or kernel layer.
+
+One or more machine configuration files exist in the
+bsp_layer\ ``/conf/machine/`` directory of the layer:
+bsp_layer\ ``/conf/machine/``\ machine1\ ``.conf``
+bsp_layer\ ``/conf/machine/``\ machine2\ ``.conf``
+bsp_layer\ ``/conf/machine/``\ machine3\ ``.conf`` ... more ... For
+example, the machine configuration file for the `BeagleBone and
+BeagleBone Black development boards <http://beagleboard.org/bone>`__ is
+located in the layer ``poky/meta-yocto-bsp/conf/machine`` and is named
+``beaglebone-yocto.conf``: #@TYPE: Machine #@NAME: Beaglebone-yocto
+machine #@DESCRIPTION: Reference machine configuration for
+http://beagleboard.org/bone and http://beagleboard.org/black boards
+PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" XSERVER ?=
+"xserver-xorg \\ xf86-video-modesetting \\ " MACHINE_EXTRA_RRECOMMENDS =
+"kernel-modules kernel-devicetree" EXTRA_IMAGEDEPENDS += "u-boot"
+DEFAULTTUNE ?= "cortexa8hf-neon" include
+conf/machine/include/tune-cortexa8.inc IMAGE_FSTYPES += "tar.bz2 jffs2
+wic wic.bmap" EXTRA_IMAGECMD_jffs2 = "-lnp " WKS_FILE ?=
+"beaglebone-yocto.wks" IMAGE_INSTALL_append = " kernel-devicetree
+kernel-image-zimage" do_image_wic[depends] +=
+"mtools-native:do_populate_sysroot
+dosfstools-native:do_populate_sysroot" SERIAL_CONSOLES ?= "115200;ttyS0
+115200;ttyO0" SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+PREFERRED_VERSION_linux-yocto ?= "5.0%" KERNEL_IMAGETYPE = "zImage"
+KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb
+am335x-bonegreen.dtb" KERNEL_EXTRA_ARGS +=
+"LOADADDR=${UBOOT_ENTRYPOINT}" SPL_BINARY = "MLO" UBOOT_SUFFIX = "img"
+UBOOT_MACHINE = "am335x_evm_defconfig" UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000" MACHINE_FEATURES = "usbgadget usbhost
+vfat alsa" IMAGE_BOOT_FILES ?= "u-boot.${UBOOT_SUFFIX} MLO zImage
+am335x-bone.dtb am335x-boneblack.dtb am335x-bonegreen.dtb" The variables
+used to configure the machine define machine-specific properties; for
+example, machine-dependent packages, machine tunings, the type of kernel
+to build, and U-Boot configurations.
+
+The following list provides some explanation for the statements found in
+the example reference machine configuration file for the BeagleBone
+development boards. Realize that much more can be defined as part of a
+machine's configuration file. In general, you can learn about related
+variables that this example does not have by locating the variables in
+the "`Yocto Project Variables
+Glossary <&YOCTO_DOCS_REF_URL;#ref-variables-glos>`__" in the Yocto
+Project Reference Manual.
+
+-  ```PREFERRED_PROVIDER_virtual/xserver`` <&YOCTO_DOCS_REF_URL;#var-PREFERRED_PROVIDER>`__:
+   The recipe that provides "virtual/xserver" when more than one
+   provider is found. In this case, the recipe that provides
+   "virtual/xserver" is "xserver-xorg", which exists in
+   ``poky/meta/recipes-graphics/xorg-xserver``.
+
+-  ```XSERVER`` <&YOCTO_DOCS_REF_URL;#var-XSERVER>`__: The packages that
+   should be installed to provide an X server and drivers for the
+   machine. In this example, the "xserver-xorg" and
+   "xf86-video-modesetting" are installed.
+
+-  ```MACHINE_EXTRA_RRECOMMENDS`` <&YOCTO_DOCS_REF_URL;#var-MACHINE_EXTRA_RRECOMMENDS>`__:
+   A list of machine-dependent packages not essential for booting the
+   image. Thus, the build does not fail if the packages do not exist.
+   However, the packages are required for a fully-featured image.
+
+   .. note::
+
+      Many
+      MACHINE\*
+      variables exist that help you configure a particular piece of
+      hardware.
+
+-  ```EXTRA_IMAGEDEPENDS`` <&YOCTO_DOCS_REF_URL;#var-EXTRA_IMAGEDEPENDS>`__:
+   Recipes to build that do not provide packages for installing into the
+   root filesystem but building the image depends on the recipes.
+   Sometimes a recipe is required to build the final image but is not
+   needed in the root filesystem. In this case, the U-Boot recipe must
+   be built for the image.
+
+-  ```DEFAULTTUNE`` <&YOCTO_DOCS_REF_URL;#var-DEFAULTTUNE>`__: Machines
+   use tunings to optimize machine, CPU, and application performance.
+   These features, which are collectively known as "tuning features",
+   exist in the `OpenEmbedded-Core
+   (OE-Core) <&YOCTO_DOCS_REF_URL;#oe-core>`__ layer (e.g.
+   ``poky/meta/conf/machine/include``). In this example, the default
+   tunning file is "cortexa8hf-neon".
+
+   .. note::
+
+      The
+      include
+      statement that pulls in the
+      conf/machine/include/tune-cortexa8.inc
+      file provides many tuning possibilities.
+
+-  ```IMAGE_FSTYPES`` <&YOCTO_DOCS_REF_URL;#var-IMAGE_FSTYPES>`__: The
+   formats the OpenEmbedded build system uses during the build when
+   creating the root filesystem. In this example, four types of images
+   are supported.
+
+-  ```EXTRA_IMAGECMD`` <&YOCTO_DOCS_REF_URL;#var-EXTRA_IMAGECMD>`__:
+   Specifies additional options for image creation commands. In this
+   example, the "-lnp " option is used when creating the
+   `JFFS2 <https://en.wikipedia.org/wiki/JFFS2>`__ image.
+
+-  ```WKS_FILE`` <&YOCTO_DOCS_REF_URL;#var-WKS_FILE>`__: The location of
+   the `Wic kickstart <&YOCTO_DOCS_REF_URL;#ref-kickstart>`__ file used
+   by the OpenEmbedded build system to create a partitioned image
+   (image.wic).
+
+-  ```IMAGE_INSTALL`` <&YOCTO_DOCS_REF_URL;#var-IMAGE_INSTALL>`__:
+   Specifies packages to install into an image through the
+   ```image`` <&YOCTO_DOCS_REF_URL;#ref-classes-image>`__ class. Recipes
+   use the ``IMAGE_INSTALL`` variable.
+
+-  ``do_image_wic[depends]``: A task that is constructed during the
+   build. In this example, the task depends on specific tools in order
+   to create the sysroot when buiding a Wic image.
+
+-  ```SERIAL_CONSOLES`` <&YOCTO_DOCS_REF_URL;#var-SERIAL_CONSOLES>`__:
+   Defines a serial console (TTY) to enable using getty. In this case,
+   the baud rate is "115200" and the device name is "ttyO0".
+
+-  ```PREFERRED_PROVIDER_virtual/kernel`` <&YOCTO_DOCS_REF_URL;#var-PREFERRED_PROVIDER>`__:
+   Specifies the recipe that provides "virtual/kernel" when more than
+   one provider is found. In this case, the recipe that provides
+   "virtual/kernel" is "linux-yocto", which exists in the layer's
+   ``recipes-kernel/linux`` directory.
+
+-  ```PREFERRED_VERSION_linux-yocto`` <&YOCTO_DOCS_REF_URL;#var-PREFERRED_VERSION>`__:
+   Defines the version of the recipe used to build the kernel, which is
+   "5.0" in this case.
+
+-  ```KERNEL_IMAGETYPE`` <&YOCTO_DOCS_REF_URL;#var-KERNEL_IMAGETYPE>`__:
+   The type of kernel to build for the device. In this case, the
+   OpenEmbedded build system creates a "zImage" image type.
+
+-  ```KERNEL_DEVICETREE`` <&YOCTO_DOCS_REF_URL;#var-KERNEL_DEVICETREE>`__:
+   The names of the generated Linux kernel device trees (i.e. the
+   ``*.dtb``) files. All the device trees for the various BeagleBone
+   devices are included.
+
+-  ```KERNEL_EXTRA_ARGS`` <&YOCTO_DOCS_REF_URL;#var-KERNEL_EXTRA_ARGS>`__:
+   Additional ``make`` command-line arguments the OpenEmbedded build
+   system passes on when compiling the kernel. In this example,
+   "LOADADDR=${UBOOT_ENTRYPOINT}" is passed as a command-line argument.
+
+-  ```SPL_BINARY`` <&YOCTO_DOCS_REF_URL;#var-SPL_BINARY>`__: Defines the
+   Secondary Program Loader (SPL) binary type. In this case, the SPL
+   binary is set to "MLO", which stands for Multimedia card LOader.
+
+   The BeagleBone development board requires an SPL to boot and that SPL
+   file type must be MLO. Consequently, the machine configuration needs
+   to define ``SPL_BINARY`` as "MLO".
+
+   .. note::
+
+      For more information on how the SPL variables are used, see the
+      u-boot.inc
+      include file.
+
+-  ```UBOOT_*`` <&YOCTO_DOCS_REF_URL;#var-UBOOT_ENTRYPOINT>`__: Defines
+   various U-Boot configurations needed to build a U-Boot image. In this
+   example, a U-Boot image is required to boot the BeagleBone device.
+   See the following variables for more information:
+
+   -  ```UBOOT_SUFFIX`` <&YOCTO_DOCS_REF_URL;#var-UBOOT_SUFFIX>`__:
+      Points to the generated U-Boot extension.
+
+   -  ```UBOOT_MACHINE`` <&YOCTO_DOCS_REF_URL;#var-UBOOT_MACHINE>`__:
+      Specifies the value passed on the make command line when building
+      a U-Boot image.
+
+   -  ```UBOOT_ENTRYPOINT`` <&YOCTO_DOCS_REF_URL;#var-UBOOT_ENTRYPOINT>`__:
+      Specifies the entry point for the U-Boot image.
+
+   -  ```UBOOT_LOADADDRESS`` <&YOCTO_DOCS_REF_URL;#var-UBOOT_LOADADDRESS>`__:
+      Specifies the load address for the U-Boot image.
+
+-  ```MACHINE_FEATURES`` <&YOCTO_DOCS_REF_URL;#var-MACHINE_FEATURES>`__:
+   Specifies the list of hardware features the BeagleBone device is
+   capable of supporting. In this case, the device supports "usbgadget
+   usbhost vfat alsa".
+
+-  ```IMAGE_BOOT_FILES`` <&YOCTO_DOCS_REF_URL;#var-IMAGE_BOOT_FILES>`__:
+   Files installed into the device's boot partition when preparing the
+   image using the Wic tool with the ``bootimg-partition`` or 
+   ``bootimg-efi`` source plugin.
+
+BSP Kernel Recipe Example
+-------------------------
+
+The kernel recipe used to build the kernel image for the BeagleBone
+device was established in the machine configuration:
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+PREFERRED_VERSION_linux-yocto ?= "5.0%" The
+``meta-yocto-bsp/recipes-kernel/linux`` directory in the layer contains
+metadata used to build the kernel. In this case, a kernel append file
+(i.e. ``linux-yocto_5.0.bbappend``) is used to override an established
+kernel recipe (i.e. ``linux-yocto_5.0.bb``), which is located in
+` <&YOCTO_GIT_URL;/cgit/cgit.cgi/poky/tree/meta/recipes-kernel/linux>`__.
+
+Following is the contents of the append file: KBRANCH_genericx86 =
+"v5.0/standard/base" KBRANCH_genericx86-64 = "v5.0/standard/base"
+KBRANCH_edgerouter = "v5.0/standard/edgerouter" KBRANCH_beaglebone-yocto
+= "v5.0/standard/beaglebone" KMACHINE_genericx86 ?= "common-pc"
+KMACHINE_genericx86-64 ?= "common-pc-64" KMACHINE_beaglebone-yocto ?=
+"beaglebone" SRCREV_machine_genericx86 ?=
+"3df4aae6074e94e794e27fe7f17451d9353cdf3d" SRCREV_machine_genericx86-64
+?= "3df4aae6074e94e794e27fe7f17451d9353cdf3d" SRCREV_machine_edgerouter
+?= "3df4aae6074e94e794e27fe7f17451d9353cdf3d"
+SRCREV_machine_beaglebone-yocto ?=
+"3df4aae6074e94e794e27fe7f17451d9353cdf3d" COMPATIBLE_MACHINE_genericx86
+= "genericx86" COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
+COMPATIBLE_MACHINE_edgerouter = "edgerouter"
+COMPATIBLE_MACHINE_beaglebone-yocto = "beaglebone-yocto"
+LINUX_VERSION_genericx86 = "5.0.3" LINUX_VERSION_genericx86-64 = "5.0.3"
+LINUX_VERSION_edgerouter = "5.0.3" LINUX_VERSION_beaglebone-yocto =
+"5.0.3" This particular append file works for all the machines that are
+part of the ``meta-yocto-bsp`` layer. The relevant statements are
+appended with the "beaglebone-yocto" string. The OpenEmbedded build
+system uses these statements to override similar statements in the
+kernel recipe:
+
+-  ```KBRANCH`` <&YOCTO_DOCS_REF_URL;#var-KBRANCH>`__: Identifies the
+   kernel branch that is validated, patched, and configured during the
+   build.
+
+-  ```KMACHINE`` <&YOCTO_DOCS_REF_URL;#var-KMACHINE>`__: Identifies the
+   machine name as known by the kernel, which is sometimes a different
+   name than what is known by the OpenEmbedded build system.
+
+-  ```SRCREV`` <&YOCTO_DOCS_REF_URL;#var-SRCREV>`__: Identifies the
+   revision of the source code used to build the image.
+
+-  ```COMPATIBLE_MACHINE`` <&YOCTO_DOCS_REF_URL;#var-COMPATIBLE_MACHINE>`__:
+   A regular expression that resolves to one or more target machines
+   with which the recipe is compatible.
+
+-  ```LINUX_VERSION`` <&YOCTO_DOCS_REF_URL;#var-LINUX_VERSION>`__: The
+   Linux version from kernel.org used by the OpenEmbedded build system
+   to build the kernel image.