documentation/dev-manual: Changed 2.6.37 to 3.0 for 1.1 release.

Bruce Ashfield's review comments indicated that we will be using
linux-yocto-3.0 and not linux-yocto-2.6.37.  So I am putting these
changes in to anticipate the 1.1 release.

(From yocto-docs rev: ecbe1c90c5aa65b2dde77ba6094b5956e37d061d)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

4 files changed, 31 insertions, 28 deletions

diff --git a/documentation/dev-manual/dev-manual-bsp-appendix.xml b/documentation/dev-manual/dev-manual-bsp-appendix.xml
index 6a3598543f..97ceb12744 100644
--- a/documentation/dev-manual/dev-manual-bsp-appendix.xml
+++ b/documentation/dev-manual/dev-manual-bsp-appendix.xml
@@ -173,7 +173,7 @@
             <filename>PREFERRED_PROVIDER_virtual/kernel</filename> statement. 
             This statement identifies the kernel that the BSP is going to use.
             In this case the BSP is using <filename>linux-yocto</filename>, which is the 
-            current Linux Yocto kernel based on the Linux 2.6.37 release. 
+            current Linux Yocto kernel based on the Linux 3.0 release. 
         </para>
 
         <para>
@@ -300,7 +300,7 @@
                 The recipe for that kernel is not located in the  
                 BSP layer but rather in the local Yocto Project files at 
                 <filename>meta/recipes-kernel/linux</filename> and is 
-                named <filename>linux-yocto_2.6.37.bb</filename>.
+                named <filename>linux-yocto_3.0.bb</filename>.
                 The <filename>SRCREV_machine</filename> and <filename>SRCREV_meta</filename>
                 statements point to the exact commits used by the Yocto Project development team
                 in their source repositories that identify the right kernel for our hardware.
@@ -309,7 +309,7 @@
             <para>
                 However, in the <filename>meta-mymachine</filename> layer in 
                 <filename>recipes-kernel/linux</filename> resides a <filename>.bbappend</filename>
-                file named <filename>linux-yocto_2.6.37.bbappend</filename> that 
+                file named <filename>linux-yocto_3.0.bbappend</filename> that 
                 is appended to the recipe of the same name in <filename>meta/recipes-kernel/link</filename>.
                 Thus, the <filename>SRCREV</filename> statements in the "append" file override
                 the more general statements found in <filename>meta</filename>.
@@ -343,7 +343,7 @@
             </para>
 
             <para>  
-                To fix this situation in <filename>linux-yocto_2.6.37.bbappend</filename>
+                To fix this situation in <filename>linux-yocto_3.0.bbappend</filename>
                 we delete the two <filename>SRCREV</filename> statements that support 
                EMGD (the top pair).
                 We also change the remaining pair to specify <filename>mymachine</filename>
@@ -364,8 +364,9 @@
                 exact commit strings in the Yocto Project source repositories you need to change 
                 the <filename>SRCREV</filename> statements.  
                 You can find all the <filename>machine</filename> and <filename>meta</filename> 
-                branch points (commits) for the <filename>linux-yocto-2.6.37</filename> kernel 
-                <ulink url='http://git.yoctoproject.org/cgit/cgit.cgi/linux-yocto-2.6.37'>here</ulink>.  
+                branch points (commits) for the <filename>linux-yocto-3.0</filename> kernel 
+                <ulink url='http://git.yoctoproject.org/cgit/cgit.cgi/linux-yocto-2.6.37'>here</ulink>
+                [WRITER's NOTE:  Need new link to the 3.0 source repo area when it is available].  
             </para>
 
             <para>
@@ -376,7 +377,7 @@
                         branch</para></listitem>
                     <listitem><para>Click on the commit column header to view the top commit</para></listitem>
                     <listitem><para>Copy the commit string for use in the 
-                        <filename>linux-yocto_2.6.37.bbappend</filename> file</para></listitem>
+                        <filename>linux-yocto_3.0.bbappend</filename> file</para></listitem>
                 </orderedlist>
             </para>
 
@@ -387,14 +388,14 @@
             </para>
 
             <para>
-                Also in the <filename>linux-yocto_2.6.37.bbappend</filename> file are 
+                Also in the <filename>linux-yocto_3.0.bbappend</filename> file are 
                 <filename>COMPATIBLE_MACHINE</filename>, <filename>KMACHINE</filename>, 
                 and <filename>KERNEL_FEATURES</filename> statements.  
                 Two sets of these exist: one set supports EMGD and one set does not.
                 Because we are not interested in supporting EMGD those three can be deleted.
                 The remaining three must be changed so that <filename>mymachine</filename> replaces
                 <filename>crownbay-noemgd</filename> and <filename>crownbay</filename>.
-                Here is the final <filename>linux-yocto_2.6.37.bbappend</filename> file after all 
+                Here is the final <filename>linux-yocto_3.0.bbappend</filename> file after all 
                 the edits:
                 <literallayout class='monospaced'>
      FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
diff --git a/documentation/dev-manual/dev-manual-kernel-appendix.xml b/documentation/dev-manual/dev-manual-kernel-appendix.xml
index d7b5587cb9..4000a0b943 100644
--- a/documentation/dev-manual/dev-manual-kernel-appendix.xml
+++ b/documentation/dev-manual/dev-manual-kernel-appendix.xml
@@ -176,7 +176,7 @@
             <title>Setting Up the Bare Clone and its Copy</title>
 
             <para>
-                This example modifies the <filename>linux-yocto-2.6.37</filename> kernel.
+                This example modifies the <filename>linux-yocto-3.0</filename> kernel.
                 Thus, you need to create a bare clone of that kernel and then make a copy of the 
                 bare clone.
                 See the bulleted item
@@ -189,12 +189,12 @@
                 The bare clone exists for the kernel build tools and simply as the receiving end 
                 of <filename>git push</filename>
                 commands after you make edits and commits inside the copy of the clone.
-                The copy (<filename>linux-yocto-2.6.37</filename> in this example) has to have 
+                The copy (<filename>linux-yocto-3.0</filename> in this example) has to have 
                 a local branch created and checked out for your work.
                 This example uses <filename>common-pc-base</filename> as the local branch.
                 The following commands create and checkout the branch:
                 <literallayout class='monospaced'>
-     $ cd ~/linux-yocto-2.6.37
+     $ cd ~/linux-yocto-3.0
      $ git checkout -b common-pc-base origin/yocto/standard/common-pc/base
      Branch common-pc-base set up to track remote branch yocto/standard/common-pc/base from origin.
      Switched to a new branch 'common-pc-base'
@@ -287,7 +287,7 @@
 
             <para>
                 The file you change in this example is named <filename>calibrate.c</filename>
-                and is located in the <filename>linux-yocto-2.6.37</filename> Git repository
+                and is located in the <filename>linux-yocto-3.0</filename> Git repository
                 (the copy of the bare clone) in <filename>init</filename>.
                 This example simply inserts several <filename>printk</filename> statements
                 at the beginning of the <filename>calibrate_delay</filename> function.
@@ -409,20 +409,20 @@
        "
                        </literallayout></para></listitem>
                    <listitem><para><emphasis>Identify Your Source Files</emphasis> - In the 
-                       <filename>linux-yocto_2.6.37.bbappend</filename> file located in the 
+                       <filename>linux-yocto_3.0.bbappend</filename> file located in the 
                        <filename>poky-extras/meta-kernel-dev/recipes-kernel/linux</filename>
                        directory, you need to identify the location of the 
                        local source code, which in this example is the bare clone named
-                       <filename>linux-yocto-2.6.37.git</filename>.
+                       <filename>linux-yocto-3.0.git</filename>.
                        To do this, set the <filename>KSRC_linux_yocto</filename> variable to point to your
-                       local <filename>linux-yocto-2.6.37.git</filename> Git repository by adding the 
+                       local <filename>linux-yocto-3.0.git</filename> Git repository by adding the 
                        following statement.
                        Be sure to substitute your user information in the statement:
                        <literallayout class='monospaced'>
-     KSRC_linux_yocto ?= /home/scottrif/linux-yocto-2.6.37.git
+     KSRC_linux_yocto ?= /home/scottrif/linux-yocto-3.0.git
                        </literallayout></para></listitem>
                    <listitem><para><emphasis>Specify the Kernel Machine</emphasis> - Also in the 
-                       <filename>linux-yocto_2.6.37.bbappend</filename> file, you need to specify
+                       <filename>linux-yocto_3.0.bbappend</filename> file, you need to specify
                        the kernel machine with the following statement:
                        <literallayout class='monospaced'>
      KMACHINE_qemux86 = "yocto/standard/common-pc/base"
@@ -438,7 +438,7 @@
                comment out the <filename>COMPATIBLE_MACHINE</filename> statements in all 
                <filename>.bbappend</filename> files, or you should simply remove all the files 
                except the one your are using for the build 
-               (i.e. <filename>linux-yocto_2.6.37.bbappend</filename> in this example).
+               (i.e. <filename>linux-yocto_3.0.bbappend</filename> in this example).
            </note>            
        </section>
 
diff --git a/documentation/dev-manual/dev-manual-model.xml b/documentation/dev-manual/dev-manual-model.xml
index 68ea76e0c5..c0c0247247 100644
--- a/documentation/dev-manual/dev-manual-model.xml
+++ b/documentation/dev-manual/dev-manual-model.xml
@@ -256,8 +256,10 @@
                 <itemizedlist>
                     <listitem><para><emphasis><filename>linux-yocto-2.6.34</filename></emphasis> - The 
                     stable Linux Yocto kernel that is based on the Linux 2.6.34 release.</para></listitem>
-                    <listitem><para><emphasis><filename>linux-yocto-2.6.37</filename></emphasis> - The current
-                    Linux Yocto kernel that is based on the Linux 2.6.37 release.</para></listitem>
+                    <listitem><para><emphasis><filename>linux-yocto-2.6.37</filename></emphasis> - The
+                    stable Linux Yocto kernel that is based on the Linux 2.6.37 release.</para></listitem>
+                    <listitem><para><emphasis><filename>linux-yocto-3.0</filename></emphasis> - The current
+                    Linux Yocto kernel that is based on the Linux 3.0 release.</para></listitem>
                     <listitem><para><emphasis><filename>linux-yocto-dev</filename></emphasis> - A development
                     kernel based on the Linux 2.6.39-rc1 release.</para></listitem>
                     <listitem><para><emphasis><filename>linux-2.6</filename></emphasis> - A kernel based on 
diff --git a/documentation/dev-manual/dev-manual-start.xml b/documentation/dev-manual/dev-manual-start.xml
index 52be498b44..f6938fc9ca 100644
--- a/documentation/dev-manual/dev-manual-start.xml
+++ b/documentation/dev-manual/dev-manual-start.xml
@@ -114,13 +114,13 @@
                 For simplicity, it is recommended that you create these structures outside of the 
                 Yocto Project files Git repository.</para>
                 <para>As an example, the following transcript shows how to create the bare clone
-                of the <filename>linux-yocto-2.6.37</filename> kernel and then create a copy of 
+                of the <filename>linux-yocto-3.0</filename> kernel and then create a copy of 
                 that clone.
-                The bare clone is named <filename>linux-yocto-2.6.37.git</filename>, while the 
-                copy is named <filename>linux-yocto-2.6.37</filename>: 
+                The bare clone is named <filename>linux-yocto-3.0.git</filename>, while the 
+                copy is named <filename>linux-yocto-3.0</filename>: 
                 <literallayout class='monospaced'>
-     $ git clone --bare git://git.yoctoproject.org/linux-yocto-2.6.37 linux-yocto-2.6.37.git
-     Initialized empty Git repository in /home/scottrif/poky/linux-yocto-2.6.37.git/
+     $ git clone --bare git://git.yoctoproject.org/linux-yocto-3.0 linux-yocto-3.0.git
+     Initialized empty Git repository in /home/scottrif/poky/linux-yocto-3.0.git/
      remote: Counting objects: 1886034, done.
      remote: Compressing objects: 100% (314326/314326), done.
      remote: Total 1886034 (delta 1570200), reused 1870337 (delta 1554798)
@@ -129,8 +129,8 @@
                 </literallayout></para>
                 <para>Now create a clone of the bare clone just created:
                 <literallayout class='monospaced'>
-     $ git clone linux-yocto-2.6.37.git linux-yocto-2.6.37
-     Initialized empty Git repository in /home/scottrif/poky/linux-yocto-2.6.37/.git/
+     $ git clone linux-yocto-3.0.git linux-yocto-3.0
+     Initialized empty Git repository in /home/scottrif/poky/linux-yocto-3.0/.git/
      Checking out files: 100% (35188/35188), done.
                 </literallayout></para></listitem>
             <listitem id='poky-extras-repo'><para><emphasis>