meta-yocto-bsp: oeqa/controllers: add GrubTarget

add control for generic grub pc via serial line

Implementation [YOCTO #5615].

(From OE-Core rev: 01968e9244d0cf3deb1ec5cfb8e562d3b364add6)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

1 files changed, 71 insertions, 0 deletions

diff --git a/meta-yocto-bsp/lib/oeqa/controllers/grubtarget.py b/meta-yocto-bsp/lib/oeqa/controllers/grubtarget.py
new file mode 100644
index 0000000000..02ada65da6
--- /dev/null
+++ b/meta-yocto-bsp/lib/oeqa/controllers/grubtarget.py
@@ -0,0 +1,71 @@
+# Copyright (C) 2014 Intel Corporation
+#
+# Released under the MIT license (see COPYING.MIT)
+
+# This module adds support to testimage.bbclass to deploy images and run
+# tests on a Generic PC that boots using grub bootloader. The device must
+# be set up as per README.hardware and the master image should be deployed
+# onto the harddisk so that it boots into it by default.For booting into the
+# image under test we interact with grub over serial, so for the
+# Generic PC you will need an additional serial cable and device under test
+# needs to have a serial interface. The separate ext3
+# partition that will contain the image to be tested must be labelled
+# "testrootfs" so that the deployment code below can find it.
+
+import os
+import bb
+import time
+import subprocess
+import sys
+import pexpect
+
+import oeqa.utils.sshcontrol as sshcontrol
+from oeqa.controllers.masterimage import MasterImageHardwareTarget
+
+class GrubTarget(MasterImageHardwareTarget):
+
+    def __init__(self, d):
+        super(GrubTarget, self).__init__(d)
+        self.deploy_cmds = [
+                'mount -L boot /boot',
+                'mkdir -p /mnt/testrootfs',
+                'mount -L testrootfs /mnt/testrootfs',
+                'cp ~/test-kernel /boot',
+                'rm -rf /mnt/testrootfs/*',
+                'tar xvf ~/test-rootfs.%s -C /mnt/testrootfs' % self.image_fstype,
+                ]
+
+        if not self.serialcontrol_cmd:
+            bb.fatal("This TEST_TARGET needs a TEST_SERIALCONTROL_CMD defined in local.conf.")
+
+
+    def _deploy(self):
+        # make sure these aren't mounted
+        self.master.run("umount /boot; umount /mnt/testrootfs;")
+        self.master.ignore_status = False
+        # Kernel files may not be in the image, so copy them just in case
+        self.master.copy_to(self.rootfs, "~/test-rootfs." + self.image_fstype)
+        self.master.copy_to(self.kernel, "~/test-kernel")
+        for cmd in self.deploy_cmds:
+            self.master.run(cmd)
+
+    def _start(self, params=None):
+        self.power_cycle(self.master)
+        try:
+            serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout)
+            serialconn.expect("GNU GRUB  version 2.00")
+            serialconn.expect("Linux")
+            serialconn.sendline("OB\r")
+            serialconn.expect("login:", timeout=120)
+            serialconn.close()
+        except pexpect.ExceptionPexpect as e:
+            bb.fatal('Serial interaction failed: %s' % str(e))
+
+    def _wait_until_booted(self):
+        try:
+            serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout)
+            serialconn.expect("login:", timeout=120)
+            serialconn.close()
+        except pexpect.ExceptionPexpect as e:
+            bb.fatal('Serial interaction failed: %s' % str(e))
+