poky.ent, bsp-guide: Removed eMenlow example and updated 2.1 variables

Probably should have committed these separately but....

 * Updated the BSP guide to use an example that we support.
   I removed the eMenlow stuff completely.

 * Fixed poky.ent so the 15.0.0 stuff is used for the variables.
   This supports the 2.1 release.

(From yocto-docs rev: 598b261725235b6f160561db22bd9f31ec721066)

Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

3 files changed, 310 insertions, 166 deletions

diff --git a/documentation/bsp-guide/bsp-guide.xml b/documentation/bsp-guide/bsp-guide.xml
index 5fae0e5e57..a8ea49a67f 100644
--- a/documentation/bsp-guide/bsp-guide.xml
+++ b/documentation/bsp-guide/bsp-guide.xml
@@ -22,11 +22,11 @@
 
         <authorgroup>
             <author>
-                <firstname>Tom</firstname> <surname>Zanussi</surname>
+                <firstname>Saul</firstname> <surname>Wold</surname>
                 <affiliation>
                     <orgname>Intel Corporation</orgname>
                 </affiliation>
-                <email>tom.zanussi@intel.com</email>
+                <email>saul.wold@intel.com</email>
             </author>
             <author>
                 <firstname>Richard</firstname> <surname>Purdie</surname>
diff --git a/documentation/bsp-guide/bsp.xml b/documentation/bsp-guide/bsp.xml
index 8cf2a1e633..87c159cecf 100644
--- a/documentation/bsp-guide/bsp.xml
+++ b/documentation/bsp-guide/bsp.xml
@@ -60,16 +60,28 @@
                 <ulink url='&YOCTO_GIT_URL;/cgit/cgit.cgi'></ulink>.
                 If you go to that interface, you will find near the bottom of the list
                 under "Yocto Metadata Layers" several BSP layers all of which are
-                supported by the Yocto Project (e.g. <filename>meta-minnow</filename>,
-                <filename>meta-raspberrypi</filename>, and
+                supported by the Yocto Project (e.g. <filename>meta-raspberrypi</filename> and
                 <filename>meta-intel</filename>).
                 Each of these layers is a repository unto itself and clicking on a
                 layer reveals information that includes two links from which you can choose
                 to set up a clone of the layer's repository on your local host system.
-                Here is an example that clones the MinnowBoard BSP layer:
+                Here is an example that clones the Raspberry Pi BSP layer:
                 <literallayout class='monospaced'>
-     $ git clone git://git.yoctoproject.org/meta-minnow
+     $ git clone git://git.yoctoproject.org/meta-raspberrypi
                 </literallayout>
+            </para>
+
+            <para>
+                In addition to BSP layers near the bottom of that referenced
+                Yocto Project Source Repository, the
+                <filename>meta-yocto-bsp</filename> layer is part of the
+                shipped <filename>poky</filename> repository.
+                The <filename>meta-yocto-bsp</filename> layer maintains several
+                BSPs such as the Beaglebone, EdgeRouter, and generic versions of
+                both 32 and 64-bit IA machines.
+            </para>
+
+            <para>
                 For information on the BSP development workflow, see the
                 "<ulink url='&YOCTO_DOCS_DEV_URL;#developing-a-board-support-package-bsp'>Developing a Board Support Package (BSP)</ulink>"
                 section in the Yocto Project Development Manual.
@@ -80,8 +92,9 @@
             </para>
 
             <para>
-                The layer's base directory (<filename>meta-<replaceable>bsp_name</replaceable></filename>) is the root
-                of the BSP Layer.
+                The layer's base directory
+                (<filename>meta-<replaceable>bsp_name</replaceable></filename>)
+                is the root of the BSP Layer.
                 This root is what you add to the
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-BBLAYERS'><filename>BBLAYERS</filename></ulink>
                 variable in the <filename>conf/bblayers.conf</filename> file found in the
@@ -121,6 +134,8 @@
                 An example of this type of layer is the <filename>meta-intel</filename> layer,
                 which contains a number of individual BSP sub-layers, as well as a directory
                 named <filename>common/</filename> full of common content across those layers.
+                Another example is the <filename>meta-yocto-bsp</filename> layer mentioned
+                earlier.
             </para>
 
             <para>
@@ -130,7 +145,6 @@
             </para>
         </section>
 
-
         <section id="bsp-filelayout">
             <title>Example Filesystem Layout</title>
 
@@ -194,33 +208,142 @@
             </para>
 
             <para>
-                Below is an example of the eMenlow BSP:
+                Below is an example of the Raspberry Pi BSP:
 
                 <literallayout class='monospaced'>
-     meta-emenlow/COPYING.MIT
-     meta-emenlow/README
-     meta-emenlow/README.sources
-     meta-emenlow/binary/
-     meta-emenlow/conf/
-     meta-emenlow/conf/layer.conf
-     meta-emenlow/conf/machine/
-     meta-emenlow/conf/machine/emenlow-noemgd.conf
-     meta-emenlow/recipes-bsp/
-     meta-emenlow/recipes-bsp/formfactor/
-     meta-emenlow/recipes-bsp/formfactor/formfactor/
-     meta-emenlow/recipes-bsp/formfactor/formfactor_0.0.bbappend
-     meta-emenlow/recipes-bsp/formfactor/formfactor/emenlow-noemgd/
-     meta-emenlow/recipes-bsp/formfactor/formfactor/emenlow-noemgd/machconfig
-     meta-emenlow/recipes-graphics/
-     meta-emenlow/recipes-graphics/xorg-xserver
-     meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-config
-     meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
-     meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-config/emenlow-noemgd
-     meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-config/emenlow-noemgd/xorg.config
-     meta-emenlow/recipes-kernel/
-     meta-emenlow/recipes-kernel/linux/
-     meta-emenlow/recipes-kernel/linux/linux-yocto-dev.bbappend
-     meta-emenlow/recipes-kernel/linux/linux-yocto_3.14.bbappend
+     meta-raspberrypi/COPYING.MIT
+     meta-raspberrypi/README
+     meta-raspberrypi/classes
+     meta-raspberrypi/classes/linux-raspberrypi-base.bbclass
+     meta-raspberrypi/classes/sdcard_image-rpi.bbclass
+     meta-raspberrypi/conf/
+     meta-raspberrypi/conf/layer.conf
+     meta-raspberrypi/conf/machine/
+     meta-raspberrypi/conf/machine/raspberrypi.conf
+     meta-raspberrypi/conf/machine/raspberrypi0.conf
+     meta-raspberrypi/conf/machine/raspberrypi2.conf
+     meta-raspberrypi/conf/machine/raspberrypi3.conf
+     meta-raspberrypi/conf/machine/include
+     meta-raspberrypi/conf/machine/include/rpi-base.inc
+     meta-raspberrypi/conf/machine/include/rpi-default-providers.inc
+     meta-raspberrypi/conf/machine/include/rpi-default-settings.inc
+     meta-raspberrypi/conf/machine/include/rpi-default-versions.inc
+     meta-raspberrypi/conf/machine/include/rpi-tune-arm1176jzf-s.inc
+     meta-raspberrypi/files
+     meta-raspberrypi/files/custom-licenses
+     meta-raspberrypi/files/custom-licenses/Broadcom
+     meta-raspberrypi/recipes-bsp
+     meta-raspberrypi/recipes-bsp/bootfiles
+     meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
+     meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
+     meta-raspberrypi/recipes-bsp/common
+     meta-raspberrypi/recipes-bsp/common/firmware.inc
+     meta-raspberrypi/recipes-bsp/formfactor_00.bbappend
+     meta-raspberrypi/recipes-bsp/formfactor/raspberrypi/machconfig
+     meta-raspberrypi/recipes-bsp/rpi-mkimage_git.bb
+     meta-raspberrypi/recipes-bsp/rpi-mkimage/License
+     meta-raspberrypi/recipes-bsp/rpi-mkimage/open-files-relative-to-script.patch
+     meta-raspberrypi/recipes-bsp/u-boot/u-boot-rpi_git.bb
+     meta-raspberrypi/recipes-core
+     meta-raspberrypi/recipes-core/images
+     meta-raspberrypi/recipes-core/images/rpi-basic-image.bb
+     meta-raspberrypi/recipes-core/images/rpi-hwup-image.bb
+     meta-raspberrypi/recipes-core/images/rpi-test-image.bb
+     meta-raspberrypi/recipes-core/packagegroups
+     meta-raspberrypi/recipes-core/packagegroups/packagegroup-rpi-test.bb
+     meta-raspberrypi/recipes-core/psplash
+     meta-raspberrypi/recipes-core/psplash/files
+     meta-raspberrypi/recipes-core/psplash/psplash_git.bbappend
+     meta-raspberrypi/recipes-core/psplash/files/psplash-raspberrypi-img.h
+     meta-raspberrypi/recipes-devtools
+     meta-raspberrypi/recipes-devtools/bcm2835
+     meta-raspberrypi/recipes-devtools/bcm2835/bcm2835_1.46.bb
+     meta-raspberrypi/recipes-devtools/pi-blaster
+     meta-raspberrypi/recipes-devtools/pi-blaster/files
+     meta-raspberrypi/recipes-devtools/pi-blaster/*.patch
+     meta-raspberrypi/recipes-devtools/pi-blaster/pi-blaster.inc
+     meta-raspberrypi/recipes-devtools/pi-blaster/pi-blaster_git.bb
+     meta-raspberrypi/recipes-devtools/python
+     meta-raspberrypi/recipes-devtools/python/python-rtimu
+     meta-raspberrypi/recipes-devtools/python/python-rtimu/*.patch
+     meta-raspberrypi/recipes-devtools/python/python-rtimu_git.bb
+     meta-raspberrypi/recipes-devtools/python/python-sense-hat_2.1.0.bb
+     meta-raspberrypi/recipes-devtools/python/rpi-gpio
+     meta-raspberrypi/recipes-devtools/python/rpi-gpio/*.patch
+     meta-raspberrypi/recipes-devtools/python/rpi-gpio_0.6.1.bb
+     meta-raspberrypi/recipes-devtools/python/rpio
+     meta-raspberrypi/recipes-devtools/python/rpio/*.patch
+     meta-raspberrypi/recipes-devtools/python/rpio_0.10.0.bb
+     meta-raspberrypi/recipes-devtools/wiringPi
+     meta-raspberrypi/recipes-devtools/wiringPi/files
+     meta-raspberrypi/recipes-devtools/wiringPi/files/*.patch
+     meta-raspberrypi/recipes-devtools/wiringPi/wiringpi
+     meta-raspberrypi/recipes-devtools/wiringPi/wiringpi/*.patch
+     meta-raspberrypi/recipes-devtools/wiringPi/wiringpi_git.bb
+     meta-raspberrypi/recipes-graphics
+     meta-raspberrypi/recipes-graphics/eglinfo
+     meta-raspberrypi/recipes-graphics/eglinfo/eglinfo-fb_%.bbappend
+     meta-raspberrypi/recipes-graphics/eglinfo/eglinfo-x11_%.bbappend
+     meta-raspberrypi/recipes-graphics/userland
+     meta-raspberrypi/recipes-graphics/userland/userland
+     meta-raspberrypi/recipes-graphics/userland/userland/*.patch
+     meta-raspberrypi/recipes-graphics/userland/userland_git.bb
+     meta-raspberrypi/recipes-graphics/vc-graphics
+     meta-raspberrypi/recipes-graphics/vc-graphics/files
+     meta-raspberrypi/recipes-graphics/vc-graphics/files/egl.pc
+     meta-raspberrypi/recipes-graphics/vc-graphics/files/vchiq.sh
+     meta-raspberrypi/recipes-graphics/vc-graphics/vc-graphics-hardfp.bb
+     meta-raspberrypi/recipes-graphics/vc-graphics/vc-graphics.bb
+     meta-raspberrypi/recipes-graphics/vc-graphics/vc-graphics.inc
+     meta-raspberrypi/recipes-graphics/wayland
+     meta-raspberrypi/recipes-graphics/wayland/weston_%.bbappend
+     meta-raspberrypi/recipes-graphics/weston
+     meta-raspberrypi/recipes-graphics/weston/weston_%.bbappend
+     meta-raspberrypi/recipes-graphics/xorg-xserver
+     meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config
+     meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi
+     meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf
+     meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d
+     meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/10-evdev.conf
+     meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/99-pitft.conf
+     meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
+     meta-raspberrypi/recipes-kernel
+     meta-raspberrypi/recipes-kernel/linux-firmware
+     meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware
+     meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware/LICENSE.broadcom_brcm80211
+     meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware/brcmfmac43430-sdio.bin
+     meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware/brcmfmac43430-sdio.txt
+     meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware_git.bbappend
+     meta-raspberrypi/recipes-kernel/linux
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-3.14
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-3.14/*.patch
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-3.18
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-3.18/*.patch
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-4.1
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-4.1/*.patch
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/defconfig
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_3.14.bb
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_3.18.bb
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.1.bb
+     meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.4.bb
+     meta-raspberrypi/recipes-kernel/linux/linux.inc
+     meta-raspberrypi/recipes-multimedia
+     meta-raspberrypi/recipes-multimedia/gstreamer
+     meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx
+     meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx/*.patch
+     meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx_%.bbappend
+     meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
+     meta-raspberrypi/recipes-multimedia/omxplayer
+     meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer
+     meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer/*.patch
+     meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer_git.bb
+     meta-raspberrypi/scripts
+     meta-raspberrypi/scripts/lib
+     meta-raspberrypi/scripts/lib/image
+     meta-raspberrypi/scripts/lib/image/canned-wks
+     meta-raspberrypi/scripts/lib/image/canned-wks/sdimage-raspberrypi.wks
                 </literallayout>
             </para>
 
@@ -241,7 +364,7 @@
             <para>
                 These optional files satisfy licensing requirements for the BSP.
                 The type or types of files here can vary depending on the licensing requirements.
-                For example, in the eMenlow BSP all licensing requirements are handled with the
+                For example, in the Raspberry Pi BSP all licensing requirements are handled with the
                 <filename>COPYING.MIT</filename> file.
             </para>
 
@@ -363,7 +486,7 @@
 
      # We have a recipes directory, add to BBFILES
      BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
-             ${LAYERDIR}/recipes-*/*/*.bbappend"
+                 ${LAYERDIR}/recipes-*/*/*.bbappend"
 
      BBFILE_COLLECTIONS += "<replaceable>bsp</replaceable>"
      BBFILE_PATTERN_<replaceable>bsp</replaceable> = "^${LAYERDIR}/"
@@ -375,20 +498,21 @@
 
             <para>
                 To illustrate the string substitutions, here are the corresponding statements
-                from the eEmenlow <filename>conf/layer.conf</filename> file:
+                from the Raspberry Pi <filename>conf/layer.conf</filename> file:
                <literallayout class='monospaced'>
-     # We have a conf and classes directory, add to BBPATH
+     # We have a conf and classes directory, append to BBPATH
      BBPATH .= ":${LAYERDIR}"
 
-     # We have recipes-* directories, add to BBFILES
-     BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
-             ${LAYERDIR}/recipes-*/*/*.bbappend"
+     # We have a recipes directory containing .bb and .bbappend files, add to BBFILES
+     BBFILES += "${LAYERDIR}/recipes*/*/*.bb \
+                 ${LAYERDIR}/recipes*/*/*.bbappend"
 
-     BBFILE_COLLECTIONS += "emenlow"
-     BBFILE_PATTERN_emenlow := "^${LAYERDIR}/"
-     BBFILE_PRIORITY_emenlow = "6"
+     BBFILE_COLLECTIONS += "raspberrypi"
+     BBFILE_PATTERN_raspberrypi := "^${LAYERDIR}/"
+     BBFILE_PRIORITY_raspberrypi = "9"
 
-     LAYERDEPENDS_emenlow = "intel"
+     # Additional license directories.
+     LICENSE_PATH += "${LAYERDIR}/files/custom-licenses"
                 </literallayout>
             </para>
 
@@ -450,13 +574,11 @@
             <para>
                 To use an include file, you simply include them in the
                 machine configuration file.
-                For example, the eEmenlow BSP
-                <filename>emenlow-noemgd.conf</filename> contains the
-                following statements:
+                For example, the Raspberry Pi BSP
+                <filename>raspberrypi3.conf</filename> contains the
+                following statement:
                 <literallayout class='monospaced'>
-     require conf/machine/include/intel-core2-32-common.inc
-     require conf/machine/include/intel-common-pkgarch.inc
-     require conf/machine/include/meta-intel.inc
+     include conf/machine/raspberrypi2.conf
                 </literallayout>
             </para>
             </section>
@@ -474,20 +596,22 @@
                 This optional directory contains miscellaneous recipe files for
                 the BSP.
                 Most notably would be the formfactor files.
-                For example, in the eMenlow BSP there is the
+                For example, in the Raspberry Pi BSP there is the
                 <filename>formfactor_0.0.bbappend</filename> file, which is an
                 append file used to augment the recipe that starts the build.
                 Furthermore, there are machine-specific settings used during
                 the build that are defined by the
                 <filename>machconfig</filename> file further down in the
                 directory.
-                In the eMenlow example, the <filename>machconfig</filename>
-                file supports the Video Electronics Standards Association
-                (VESA) graphics driver:
+                Here is the <filename>machconfig</filename>
+                file for the Raspberry Pi BSP:
                 <literallayout class='monospaced'>
-     # Assume a USB mouse and keyboard are connected
      HAVE_TOUCHSCREEN=0
      HAVE_KEYBOARD=1
+
+     DISPLAY_CAN_ROTATE=0
+     DISPLAY_ORIENTATION=0
+     DISPLAY_DPI=133
                 </literallayout>
             </para>
 
@@ -515,18 +639,6 @@
                 special requirements for graphics support.
                 All files that are needed for the BSP to support a display are
                 kept here.
-                For example, the <filename>meta-emenlow</filename> layer,
-                which supports the eMenlow platform consisting of the
-                <trademark class='registered'>Intel</trademark>
-                <trademark class='trade'>Atom</trademark>
-                Z5xx processor with the
-                <trademark class='registered'>Intel</trademark>
-                System Controller Hub US15W, uses these files for supporting
-                the Video Electronics Standards Association (VESA) graphics:
-                <literallayout class='monospaced'>
-     meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
-     meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-config/emenlow-noemgd/xorg.conf
-                </literallayout>
             </para>
             </section>
 
@@ -551,47 +663,63 @@
                 the <filename>meta-<replaceable>bsp_name</replaceable>/recipes-kernel/linux</filename> directory).
             </para>
             <para>
-                Suppose you are using the <filename>linux-yocto_3.14.bb</filename> recipe to build
+                Suppose you are using the <filename>linux-yocto_4.4.bb</filename> recipe to build
                 the kernel.
                 In other words, you have selected the kernel in your
                 <replaceable>bsp_name</replaceable><filename>.conf</filename> file by adding these types
                 of statements:
                 <literallayout class='monospaced'>
      PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-     PREFERRED_VERSION_linux-yocto ?= "3.14%"
+     PREFERRED_VERSION_linux-yocto ?= "4.4%"
                 </literallayout>
                 <note>
                     When the preferred provider is assumed by default, the
                     <filename>PREFERRED_PROVIDER</filename> statement does not appear in the
                     <replaceable>bsp_name</replaceable><filename>.conf</filename> file.
                 </note>
-                You would use the <filename>linux-yocto_3.14.bbappend</filename> file to append
-                specific BSP settings to the kernel, thus configuring the kernel for your particular BSP.
+                You would use the <filename>linux-yocto_4.4.bbappend</filename>
+                file to append specific BSP settings to the kernel, thus
+                configuring the kernel for your particular BSP.
             </para>
+
             <para>
-                As an example, look at the existing eMenlow BSP.
-                The append file used is:
+                As an example, consider the following append file
+                used by the BSPs in <filename>meta-yocto-bsp</filename>:
                 <literallayout class='monospaced'>
-     meta-emenlow/recipes-kernel/linux/linux-yocto_3.14.bbappend
+     meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.4.bbappend
                 </literallayout>
                 The following listing shows the file.
-                Be aware that the actual commit ID strings in this example listing might be different
-                than the actual strings in the file from the <filename>meta-intel</filename>
-                Git source repository.
+                Be aware that the actual commit ID strings in this
+                example listing might be different than the actual strings
+                in the file from the <filename>meta-yocto-bsp</filename>
+                layer upstream.
                 <literallayout class='monospaced'>
-     FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-     COMPATIBLE_MACHINE_emenlow-noemgd = "emenlow-noemgd"
-     KMACHINE_emenlow-noemgd = "emenlow"
-     KBRANCH_emenlow-noemgd = "standard/base"
-     KERNEL_FEATURES_append_emenlow-noemgd = " features/drm-gma500/drm-gma500.scc"
-
-     LINUX_VERSION_emenlow-noemgd = "3.14.19"
-     SRCREV_machine_emenlow-noemgd = "902f34d36102a4b2008b776ecae686f80d307e12"
-     SRCREV_meta_emenlow-noemgd = "28e39741b8b3018334021d981369d3fd61f18f5b"
+     KBRANCH_genericx86  = "standard/base"
+     KBRANCH_genericx86-64  = "standard/base"
+
+     KMACHINE_genericx86 ?= "common-pc"
+     KMACHINE_genericx86-64 ?= "common-pc-64"
+     KBRANCH_edgerouter = "standard/edgerouter"
+     KBRANCH_beaglebone = "standard/beaglebone"
+     KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"
+
+     SRCREV_machine_genericx86    ?= "ff4c4ef15b51f45b9106d71bf1f62fe7c02e63c2"
+     SRCREV_machine_genericx86-64 ?= "ff4c4ef15b51f45b9106d71bf1f62fe7c02e63c2"
+     SRCREV_machine_edgerouter ?= "ff4c4ef15b51f45b9106d71bf1f62fe7c02e63c2"
+     SRCREV_machine_beaglebone ?= "ff4c4ef15b51f45b9106d71bf1f62fe7c02e63c2"
+     SRCREV_machine_mpc8315e-rdb ?= "df00877ef9387b38b9601c82db57de2a1b23ce53"
+
+     COMPATIBLE_MACHINE_genericx86 = "genericx86"
+     COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
+     COMPATIBLE_MACHINE_edgerouter = "edgerouter"
+     COMPATIBLE_MACHINE_beaglebone = "beaglebone"
+     COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb"
+
+     LINUX_VERSION_genericx86 = "4.4.3"
+     LINUX_VERSION_genericx86-64 = "4.4.3"
                 </literallayout>
-                This append file contains statements used to support the
-                eMenlow BSP.
+                This append file contains statements used to support
+                several BSPs that ship with the Yocto Project.
                 The file defines machines using the
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-COMPATIBLE_MACHINE'><filename>COMPATIBLE_MACHINE</filename></ulink>
                 variable and uses the
@@ -602,25 +730,31 @@
                 The file also uses the optional
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-KBRANCH'><filename>KBRANCH</filename></ulink>
                 variable to ensure the build process uses the
-                <filename>standard/emenlow</filename> kernel branch.
-                The
+                appropriate kernel branch.
+            </para>
+
+            <para>
+                Although this particular example does not use it, the
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-KERNEL_FEATURES'><filename>KERNEL_FEATURES</filename></ulink>
-                variable enables features specific to the kernel
-                (e.g. Intel GMA-500 DRM Driver in this case).
+                variable could be used to enable features specific to
+                the kernel.
                 The append file points to specific commits in the
                 <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>
                 Git repository and the <filename>meta</filename> Git repository
                 branches to identify the exact kernel needed to build the
-                eMenlow BSP.
+                BSP.
             </para>
 
             <para>
-                One thing missing in this particular BSP, which you will typically need when
-                developing a BSP, is the kernel configuration file (<filename>.config</filename>) for your BSP.
-                When developing a BSP, you probably have a kernel configuration file or a set of kernel
-                configuration files that, when taken together, define the kernel configuration for your BSP.
-                You can accomplish this definition by putting the configurations in a file or a set of files
-                inside a directory located at the same level as your kernel's append file and having the same
+                One thing missing in this particular BSP, which you will
+                typically need when developing a BSP, is the kernel configuration
+                file (<filename>.config</filename>) for your BSP.
+                When developing a BSP, you probably have a kernel configuration
+                file or a set of kernel configuration files that, when taken
+                together, define the kernel configuration for your BSP.
+                You can accomplish this definition by putting the configurations
+                in a file or a set of files inside a directory located at the
+                same level as your kernel's append file and having the same
                 name as the kernel's main recipe file.
                 With all these conditions met, simply reference those files in the
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink>
@@ -628,37 +762,42 @@
             </para>
 
             <para>
-                For example, suppose you had some configuration options in a file called
-                <filename>network_configs.cfg</filename>.
-                You can place that file inside a directory named <filename>linux-yocto</filename> and then add
-                a <filename>SRC_URI</filename> statement such as the following to the append file.
-                When the OpenEmbedded build system builds the kernel, the configuration options are
-                picked up and applied.
+                For example, suppose you had some configuration options
+                in a file called <filename>network_configs.cfg</filename>.
+                You can place that file inside a directory named
+                <filename>linux-yocto</filename> and then add
+                a <filename>SRC_URI</filename> statement such as the
+                following to the append file.
+                When the OpenEmbedded build system builds the kernel, the
+                configuration options are picked up and applied.
                 <literallayout class='monospaced'>
      SRC_URI += "file://network_configs.cfg"
                 </literallayout>
             </para>
 
             <para>
-                To group related configurations into multiple files, you perform a similar procedure.
-                Here is an example that groups separate configurations specifically for Ethernet and graphics
-                into their own files and adds the configurations
-                by using a <filename>SRC_URI</filename> statement like the following in your append file:
+                To group related configurations into multiple files, you
+                perform a similar procedure.
+                Here is an example that groups separate configurations
+                specifically for Ethernet and graphics into their own
+                files and adds the configurations by using a
+                <filename>SRC_URI</filename> statement like the following
+                in your append file:
                 <literallayout class='monospaced'>
      SRC_URI += "file://myconfig.cfg \
-            file://eth.cfg \
-            file://gfx.cfg"
+                 file://eth.cfg \
+                 file://gfx.cfg"
                 </literallayout>
             </para>
 
             <para>
-                The <ulink url='&YOCTO_DOCS_REF_URL;#var-FILESEXTRAPATHS'><filename>FILESEXTRAPATHS</filename></ulink>
-                variable is in boilerplate form in the
-                previous example in order to make it easy to do that.
-                This variable must be in your layer or BitBake will not find the patches or
-                configurations even if you have them in your <filename>SRC_URI</filename>.
-                The <filename>FILESEXTRAPATHS</filename> variable enables the build process to
-                find those configuration files.
+                Another variable you can use in your kernel recipe append
+                file is the
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-FILESEXTRAPATHS'><filename>FILESEXTRAPATHS</filename></ulink>
+                variable.
+                When you use this statement, you are extending the locations
+                used by the OpenEmbedded system to look for files and
+                patches as the recipe is processed.
             </para>
 
             <note>
@@ -711,7 +850,7 @@
                             "<ulink url='&YOCTO_DOCS_DEV_URL;#understanding-and-creating-layers'>Understanding
                             and Creating Layers"</ulink> in the Yocto Project Development Manual.</para></listitem>
                         <listitem><para>The requirements in this section apply regardless of how you
-                            ultimately package a BSP.
+                            package a BSP.
                             You should consult the packaging and distribution guidelines for your
                             specific release process.
                             For an example of packaging and distribution requirements, see the
@@ -731,7 +870,7 @@
                 </para>
 
                 <para>
-                    Following are the requirements for a released BSP that conforms to the
+                    Following are the requirements for a released BSP that conform to the
                     Yocto Project:
                     <itemizedlist>
                         <listitem><para><emphasis>Layer Name:</emphasis>
@@ -777,15 +916,16 @@
                             You must specify which license to use since there is no
                             default license if one is not specified.
                             See the
-                            <ulink url='&YOCTO_GIT_URL;/cgit.cgi/meta-intel/tree/meta-fri2/COPYING.MIT'><filename>COPYING.MIT</filename></ulink>
-                            file for the Fish River Island 2 BSP in the <filename>meta-fri2</filename> BSP layer
-                            as an example.</para></listitem>
+                            <ulink url='&YOCTO_GIT_URL;/cgit.cgi/meta-raspberrypi/tree/COPYING.MIT'><filename>COPYING.MIT</filename></ulink>
+                            file for the Raspberry Pi BSP in the
+                            <filename>meta-raspberrypi</filename> BSP layer as an example.
+                            </para></listitem>
                         <listitem><para><emphasis>README File:</emphasis>
                             You must include a <filename>README</filename> file in the
                             <filename>meta-<replaceable>bsp_name</replaceable></filename> directory.
                             See the
-                            <ulink url='&YOCTO_GIT_URL;/cgit.cgi/meta-intel/tree/meta-fri2/README'><filename>README</filename></ulink>
-                            file for the Fish River Island 2 BSP in the <filename>meta-fri2</filename> BSP layer
+                            <ulink url='&YOCTO_GIT_URL;/cgit.cgi/meta-raspberrypi/tree/README'><filename>README</filename></ulink>
+                            file for the Raspberry Pi BSP in the <filename>meta-raspberrypi</filename> BSP layer
                             as an example.</para>
                             <para>At a minimum, the <filename>README</filename> file should
                             contain the following:
@@ -828,10 +968,7 @@
                             This file specifies exactly where you can find the sources used to
                             generate the binary images contained in the
                             <filename>binary</filename> directory, if present.
-                            See the
-                            <ulink url='&YOCTO_GIT_URL;/cgit.cgi/meta-intel/tree/meta-fri2/README.sources'><filename>README.sources</filename></ulink>
-                            file for the Fish River Island 2 BSP in the <filename>meta-fri2</filename> BSP layer
-                            as an example.</para></listitem>
+                            </para></listitem>
                         <listitem><para><emphasis>Layer Configuration File:</emphasis>
                             You must include a <filename>conf/layer.conf</filename> in the
                             <filename>meta-<replaceable>bsp_name</replaceable></filename> directory.
@@ -1175,13 +1312,14 @@
                     for that sub-command:
                     <literallayout class='monospaced'>
      $ yocto-bsp create
+     ERROR:root:Wrong number of arguments, exiting
 
      Usage:
 
       Create a new Yocto BSP
 
       usage: yocto-bsp create &lt;bsp-name&gt; &lt;karch&gt; [-o &lt;DIRNAME&gt; | --outdir &lt;DIRNAME&gt;]
-             [-i &lt;JSON PROPERTY FILE&gt; | --infile &lt;JSON PROPERTY_FILE&gt;]
+            [-i &lt;JSON PROPERTY FILE&gt; | --infile &lt;JSON PROPERTY_FILE&gt;]
 
       This command creates a Yocto BSP based on the specified parameters.
       The new BSP will be a new Yocto BSP layer contained by default within
@@ -1189,6 +1327,12 @@
       can be used to place the BSP layer in a directory with a different
       name and location.
 
+      The value of the 'karch' parameter determines the set of files that
+      will be generated for the BSP, along with the specific set of
+      'properties' that will be used to fill out the BSP-specific portions
+      of the BSP.  The possible values for the 'karch' parameter can be
+      listed via 'yocto-bsp list karch'.
+
       ...
                     </literallayout>
                 </para>
@@ -1203,7 +1347,7 @@
          yocto-bsp create - Create a new Yocto BSP
 
      SYNOPSIS
-         yocto-bsp create &lt;bsp-name&gt; &lt;karch&gt; [-o &lt;DIRNAME&gt; | --outdir &lt;DIRNAME&gt;]
+         yocto-bsp create &lt;bsp-name> &lt;karch&gt; [-o &lt;DIRNAME&gt; | --outdir &lt;DIRNAME&gt;]
              [-i &lt;JSON PROPERTY FILE&gt; | --infile &lt;JSON PROPERTY_FILE&gt;]
 
      DESCRIPTION
@@ -1213,12 +1357,6 @@
          'meta-bsp-name'.  The -o option can be used to place the BSP layer
          in a directory with a different name and location.
 
-         The value of the 'karch' parameter determines the set of files
-         that will be generated for the BSP, along with the specific set of
-         'properties' that will be used to fill out the BSP-specific
-         portions of the BSP.  The possible values for the 'karch' parameter
-         can be listed via 'yocto-bsp list karch'.
-
          ...
                     </literallayout>
                 </para>
@@ -1280,13 +1418,13 @@
                     <literallayout class='monospaced'>
      $ yocto-bsp list karch
      Architectures available:
-         qemu
-         mips64
          powerpc
          x86_64
+         i386
          arm
+         qemu
          mips
-         i386
+         mips64
                     </literallayout>
                 </para>
 
@@ -1320,35 +1458,34 @@
      $ yocto-bsp create myarm qemu
      Checking basic git connectivity...
      Done.
+
      Which qemu architecture would you like to use? [default: i386]
-         1) i386    (32-bit)
-         2) x86_64  (64-bit)
-         3) ARM     (32-bit)
-         4) PowerPC (32-bit)
-         5) MIPS    (32-bit)
-         6) MIPS64  (64-bit)
+             1) i386    (32-bit)
+             2) x86_64  (64-bit)
+             3) ARM     (32-bit)
+             4) PowerPC (32-bit)
+             5) MIPS    (32-bit)
+             6) MIPS64  (64-bit)
      3
-     Would you like to use the default (3.19) kernel? (y/n) [default: y] y
+     Would you like to use the default (4.4) kernel? (y/n) [default: y]
      Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n] [default: y]
-     Getting branches from remote repo git://git.yoctoproject.org/linux-yocto-3.19.git...
+     Getting branches from remote repo git://git.yoctoproject.org/linux-yocto-4.4.git...
      Please choose a machine branch to base your new BSP branch on: [default: standard/base]
-         1) standard/arm-versatile-926ejs
-         2) standard/base
-         3) standard/beagleboard
-         4) standard/beaglebone
-         5) standard/ck
-         6) standard/common-pc
-         7) standard/crownbay
-         8) standard/edgerouter
-         9) standard/fsl-mpc8315e-rdb
-         10) standard/mti-malta32
-         11) standard/mti-malta64
-         12) standard/qemuarm64
-         13) standard/qemuppc
+             1) standard/arm-versatile-926ejs
+             2) standard/base
+             3) standard/beaglebone
+             4) standard/edgerouter
+             5) standard/fsl-mpc8315e-rdb
+             6) standard/mti-malta32
+             7) standard/mti-malta64
+             8) standard/preempt-rt
+             9) standard/qemuarm64
+             10) standard/qemuppc
      1
      Would you like SMP support? (y/n) [default: y]
      Does your BSP have a touchscreen? (y/n) [default: n]
      Does your BSP have a keyboard? (y/n) [default: y]
+
      New qemu BSP created in meta-myarm
                     </literallayout>
                     Take a closer look at the example now:
@@ -1358,7 +1495,7 @@
                             In the example, we use the ARM architecture.
                             </para></listitem>
                         <listitem><para>The script then prompts you for the kernel.
-                            The default 3.19 kernel is acceptable.
+                            The default 4.4 kernel is acceptable.
                             So, the example accepts the default.
                             If you enter 'n', the script prompts you to further enter the kernel
                             you do want to use.</para></listitem>
@@ -1433,8 +1570,11 @@
                     <literallayout class='monospaced'>
      $ yocto-kernel --help
      Usage:
+
       Modify and list Yocto BSP kernel config items and patches.
+
       usage: yocto-kernel [--version] [--help] COMMAND [ARGS]
+
       Current 'yocto-kernel' commands are:
         config list       List the modifiable set of bare kernel config options for a BSP
         config add        Add or modify bare kernel config options for a BSP
@@ -1449,7 +1589,11 @@
         feature describe  Describe a particular feature
         feature create    Create a new BSP-local feature
         feature destroy   Remove a BSP-local feature
+
       See 'yocto-kernel help COMMAND' for more information on a specific command.
+
+
+
      Options:
        --version    show program's version number and exit
        -h, --help   show this help message and exit
diff --git a/documentation/poky.ent b/documentation/poky.ent
index b045ce64db..5a787ec342 100644
--- a/documentation/poky.ent
+++ b/documentation/poky.ent
@@ -2,8 +2,8 @@
 <!ENTITY DISTRO_COMPRESSED "21">
 <!ENTITY DISTRO_NAME "tbd">
 <!ENTITY YOCTO_DOC_VERSION "2.1">
-<!ENTITY POKYVERSION "15.0.1">
-<!ENTITY POKYVERSION_COMPRESSED "1501">
+<!ENTITY POKYVERSION "15.0.0">
+<!ENTITY POKYVERSION_COMPRESSED "1500">
 <!ENTITY YOCTO_POKY "poky-&DISTRO_NAME;-&POKYVERSION;">
 <!ENTITY COPYRIGHT_YEAR "2010-2016">
 <!ENTITY YOCTO_DL_URL "http://downloads.yoctoproject.org">