# This is a boot script for U-Boot with Xen parameters used by yocto machine
# configuration file.
# Generate boot.scr:
# mkimage -c none -A arm -T script -d boot.cmd.xen boot.scr
#
################
xen_name=@@XEN_IMAGE_NAME@@
kernel_name=@@KERNEL_IMAGE@@
rootfs_name=@@RAMDISK_IMAGE@@
@@PRE_BOOTENV@@

for boot_target in ${boot_targets};
do
	echo "Trying to load boot images from ${boot_target}"
	if test "${boot_target}" = "jtag" ; then
		tftpboot @@KERNEL_LOAD_ADDRESS@@ ${kernel_name}
		setenv kernel_size 0x$filesize;
		tftpboot @@RAMDISK_IMAGE_ADDRESS@@ ${rootfs_name}
		setenv ramdisk_size 0x$filesize;
		tftpboot @@XEN_LOAD_ADDRESS@@ ${xen_name}
		tftpboot @@DEVICETREE_ADDRESS@@ system.dtb
	fi
	if test "${boot_target}" = "mmc0" || test "${boot_target}" = "mmc1" || test "${boot_target}" = "usb0" || test "${boot_target}" = "usb1"; then
		if test "${boot_target}" = "mmc0" || test "${boot_target}" = "mmc1"; then
			setenv bootdev mmcblk${devnum}p
		fi
		if test "${boot_target}" = "usb0" || test "${boot_target}" = "usb1"; then
			setenv bootdev sda
		fi
		echo "Checking for /${xen_name}"
		if test -e ${devtype} ${devnum}:${distro_bootpart} /${xen_name}; then
			echo "Loading ${xen_name}";
			fatload ${devtype} ${devnum}:${distro_bootpart} @@XEN_LOAD_ADDRESS@@ ${xen_name};
		fi
		echo "Checking for /${kernel_name}"
		if test -e ${devtype} ${devnum}:${distro_bootpart} /${kernel_name}; then
			echo "Loading ${kernel_name}";
			fatload ${devtype} ${devnum}:${distro_bootpart} @@KERNEL_LOAD_ADDRESS@@ ${kernel_name};
			setenv kernel_size 0x$filesize;
		fi
		echo "Checking for /system.dtb"
		if test -e ${devtype} ${devnum}:${distro_bootpart} /system.dtb; then
			echo "Loading system.dtb";
			fatload ${devtype} ${devnum}:${distro_bootpart} @@DEVICETREE_ADDRESS@@ system.dtb;
		fi
		echo "Checking for /${rootfs_name}"
		if test -e ${devtype} ${devnum}:${distro_bootpart} /${rootfs_name} && test "${skip_ramdisk}" != "yes"; then
			echo "Loading ${rootfs_name}";
			fatload ${devtype} ${devnum}:${distro_bootpart} @@RAMDISK_IMAGE_ADDRESS@@ ${rootfs_name};
			setenv ramdisk_size 0x$filesize;
		fi
	fi
	fdt addr @@DEVICETREE_ADDRESS@@
	fdt resize 0x1000
	fdt get value bootargs /chosen bootargs
	fdt set /chosen \#address-cells <0x2>
	fdt set /chosen \#size-cells <0x2>
	setenv xen_bootargs "console=dtuart dtuart=@@XEN_SERIAL_CONSOLES@@ dom0_mem=@@DOM0_MEM@@ dom0_max_vcpus=@@DOM0_MAX_VCPUS@@ bootscrub=0 vwfi=native @@XEN_CMDLINE_APPEND@@"
	fdt set /chosen xen,xen-bootargs \"${xen_bootargs}\"

	# Check that env $ramdisk_size is 0 or not.
	if test -n ${ramdisk_size}; then
		fdt mknod /chosen dom0-ramdisk
		fdt set /chosen/dom0-ramdisk compatible  "xen,linux-initrd" "xen,multiboot-module" "multiboot,module"
		fdt set /chosen/dom0-ramdisk reg <0x0 @@RAMDISK_IMAGE_ADDRESS@@ 0x0 ${ramdisk_size}>
		setenv rootfs_param @@KERNEL_ROOT_RAMDISK@@
	else
		setenv rootfs_param @@KERNEL_ROOT_SD@@
	fi

	fdt mknod /chosen dom0
	fdt set /chosen/dom0 compatible  "xen,linux-zimage" "xen,multiboot-module" "multiboot,module"
	fdt set /chosen/dom0 reg <0x0 @@KERNEL_LOAD_ADDRESS@@ 0x0 ${kernel_size}>
	setenv dom0_bootargs "console=hvc0 earlycon=xen earlyprintk=xen clk_ignore_unused ${rootfs_param}"
	fdt set /chosen xen,dom0-bootargs \"${dom0_bootargs}\"

	setenv fdt_high 0xffffffffffffffff

	@@KERNEL_BOOTCMD@@ @@XEN_LOAD_ADDRESS@@ - @@DEVICETREE_ADDRESS@@
done