summaryrefslogtreecommitdiffstats
path: root/classes
Commit message (Collapse)AuthorAgeFilesLines
* OTA-2418: Remove example.com URL from automated garage-sign usagefeat/OTA-2418/remove-example.comMykhaylo Sul2019-04-032-2/+7
| | | | Signed-off-by: Mykhaylo Sul <ext-mykhaylo.sul@here.com>
* Replace connman with systemd-networkd on raspberrypiLaurent Bonnans2019-03-061-1/+1
| | | | Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com>
* Define virtual/network-configurationLaurent Bonnans2019-03-065-6/+11
| | | | | | | Now provided by connman and networkd-dhcp-conf, added to images in our supported platforms Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com>
* Replace connman with systemd-networkd on qemux86-64Laurent Bonnans2019-03-051-1/+1
| | | | Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com>
* Remove connman* from base IMAGE_INSTALL_appendLaurent Bonnans2019-03-056-2/+7
| | | | | | | No sense to force that if poky does not, let's move it to platform-specific for now. Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com>
* image_types_ostree: Add a unique ref to fix simultaneous bitbaking.fix/OTA-2211/simultaneous-bitbakingPatrick Vacek2019-02-212-3/+11
| | | | | | | | | | | | To enable simultaneous bitbaking of two images with the same branch name, create a new ref in the OSTree repo using the basename of the image. As @OYTIS has pointed out, this probably won't solve every problem that might come up with simultaneous bitbaking, such as if the two images use different bootloaders. However, it does solve the immediate problem that comes up with our primary-image + secondary-image example. Signed-off-by: Patrick Vacek <patrickvacek@gmail.com>
* Merge pull request #469 from liuming50/fix-wrong-operatorPatrick Vacek2019-02-121-1/+1
|\ | | | | sota.bbclass: fix a variable assignment regression
| * sota.bbclass: fix a variable assignment regressionMing Liu2019-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | A regression was introduced by commit 9dcfcdb9: [ classes, images: Use standard variables for initramfs ] it replaced OSTREE_INITRAMFS_IMAGE with INITRAMFS_FSTYPES which is fine, but the '??=' should be changed to "?=" as well, or else it will not take effect since INITRAMFS_FSTYPES's already set in bitbake.conf with '?='. Signed-off-by: Ming Liu <liu.ming50@gmail.com>
* | Add support for device tree overlays in FIT imagesfeat/fit-dtboAnton Gerasimov2019-02-051-1/+14
|/ | | | Signed-off-by: Anton Gerasimov <anton.gerasimov@here.com>
* meta: drop True option to getVar callsMing Liu2019-01-144-10/+10
| | | | | | | Search made with the following regex: getVar ?\((.*), True\), this is to be consistent with OE. Signed-off-by: Ming Liu <liu.ming50@gmail.com>
* image_types_ota.bbclass: fix a typoMing Liu2019-01-141-1/+1
| | | | | | type -> size. Signed-off-by: Ming Liu <liu.ming50@gmail.com>
* classes/image_types_ostree.bbclass: fix checksum calculationLuka Pivk2019-01-111-12/+13
| | | | | | | | | Adds initramfs and/or devicetree into checksum calculation. According to ostree documentation if devicetree and/or initramfs are included into ostree, checksum should also include them. Signed-off-by: Luka Pivk <luka.pivk@toradex.com>
* image_garagesign: Use a lock to fix concurrency problems.fix/OTA-1866/simultaneous-garage-signPatrick Vacek2019-01-071-0/+3
| | | | | | | | | | | We remove GARAGE_SIGN_REPO at the start and end of this task, which causes trouble if two images call this task at the same time. This probably could be fixed in a better fashion (like putting the repo in an image-specific subdirectory) but this is quick and easy, and the task usually doesn't take long to run, so the lack of parallelization is not a big loss. Signed-off-by: Patrick Vacek <patrickvacek@gmail.com>
* Merge pull request #437 from LukaPivk/masterPatrick Vacek2018-12-141-0/+9
|\ | | | | classes/image_types_ostree.bbclass: add device tree to boot/devicetree
| * classes/image_types_ostree.bbclass: add device tree to boot/devicetree-*Luka Pivk2018-12-141-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include device trees into boot/devicetree-*-checksum. Device trees with this name format get picked up by ostree and copied into boot/. Ostree also generates entry inside uEnv.txt called fdt_file pointing to this device tree. Normaly one would include only one device tree. If KERNEL_DEVICETREE includes more then one device tree this will add all the device trees but ostree will still pick only one device tree and include it into boot. We are working on modifications to ostree so it will pickup all the device trees. Signed-off-by: Luka Pivk <luka.pivk@toradex.com>
* | Merge pull request #440 from agners/mandate-usr-movePatrick Vacek2018-11-291-10/+2
|\ \ | | | | | | Use usrmerge
| * | image_types_ostree: drop manual usrmove implementationStefan Agner2018-11-281-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | OpenEmbedded's usrmerge implementation checks that nothing is installing in /bin, /sbin or /lib. Hence those directories are empty by default. There is no need for the manual usrmove anymore. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * | image_types_ostree: make usrmerge mandatoryStefan Agner2018-11-281-0/+2
| | | | | | | | | | | | | | | | | | | | | Make usrmerge a mandatory DISTRO feature when using the ostree class. This will allow to remove the "manual" usrmerge implementation. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* | | aktualizr and image_types_ota: more curly braces.fix/more-curly-bracesPatrick Vacek2018-11-281-4/+4
|/ / | | | | | | | | | | | | | | Just trying to be careful and consistent. I didn't change every variable in places where it seemed like it was obvious that we were dealing with purely local variables. Signed-off-by: Patrick Vacek <patrickvacek@gmail.com>
* | image_types_ostree: use OSTree repo location for lockfilesStefan Agner2018-11-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | OSTree does not allow concurrent access to the repository. If two bitbake instances use the same OSTree repository, then they might access it simultanously. The lockfile to prevent such simultaneous access should really be in the same location where the OSTree repository is stored. Revert back to the location inside the OSTree repository. Fixes: e97975d6113c ("image_types_ostree/ota.bbclass: refactor ostree task") Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* | Fix bloated OTA imagefixgbAnton Gerasimov2018-11-271-1/+1
|/ | | | | | Curly braces are necessary around bitbake variables Signed-off-by: Anton Gerasimov <anton.gerasimov@here.com>
* image_types_ota.bbclass: move a dependency inMing Liu2018-11-242-5/+2
| | | | | | | Move the dependency do_image_wic -> do_image_ota_ext4 from sota.bbclass to image_types_ota.bbclass, since it's a image specific dependency. Signed-off-by: Ming Liu <liu.ming50@gmail.com>
* image_types_ostree/ota.bbclass: refactor ostree taskMing Liu2018-11-244-84/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several flaws with ostree tasks, as follows: - ${IMAGE_NAME}.rootfs.ostree.tar.bz2 is generated, but it's not being used during ostree commit, so it should be removed if it's just a intermittent artifact. Or if we intend to deploy this tar.bz2 file, it should be tracked by sstate cache, that is to day, it should be generated in ${IMGDEPLOYDIR} rather than in ${DEPLOY_DIR_IMAGE}. - There are quite a few redundant code like mktemp/cd/rm a directory, which can be replaced by setting 'dirs', 'cleandirs' varflags. - There are some redundant variable check logic in image_types_ostree and image_types_ota bbclass. To fix the above, we make the following changes: - Introduce a new conversion image type 'tar', it could convert ostree and ota to ostree.tar, ota.tar, hence we can drop the code generating ostree.tar.bz2 in image_types_ostree.bbclass, and also drop the do_image_ota-tar task. To let this conversion type take effect, the otasetup task needs to be changed to ota. - Introduce BUILD_OSTREE_TARBALL variable, when being set to 1, a ostree.tar.bz2 tarball would be built, BUILD_OSTREE_TARBALL defaults to be 1, to be consistent with original behavior. - Replace 'ota-tar ota-tar.xz' with ota.tar.xz in IMAGE_FSTYPES. - Add a sanity check bbclass sota_sanity.bbclass, to ensure ostree or ota is not in OVERRIDES, this is to prevent potential naming pollution with other meta layers, and also check the required variables are not empty. This sota_sanity.bbclass is a common class that could be extended easily in furture, and one of its most advantages is that all the check are done in bb.event.SanityCheck event handler, so the end users could get the error message at very beginning of the recipe parsing time. Signed-off-by: Ming Liu <liu.ming50@gmail.com>
* meta: drop redundant export syntaxMing Liu2018-11-243-23/+11
| | | | | | | | | | | There are quite a few 'export' syntax, they are either not necessary or being redundant. Actually only the variables being referred in ostree or aktualizr need to be exported, we can move them into sota.bbclass so they can be exported once only for all other classes referring to them. And drop all other unnecessary exports. Signed-off-by: Ming Liu <liu.ming50@gmail.com>
* image_types_ostree.bbclass: fix some dependencies issuesMing Liu2018-11-241-5/+2
| | | | | | | | | | | | | | - unzip-native:do_populate_sysroot should be depended by do_image_garagesign task instead of by do_image_ostree task. - openssl-native:do_populate_sysroot can be removed since it's being depended by aktualizr-native already. - do_image_garagesign and do_image_garagecheck does not have to depend on aktualizr-native:do_populate_sysroot, that dependency is being added by do_image_ostreepush -> aktualizr-native:do_populate_sysroot. - drop ostreepush dependency from IMAGE_TYPEDEP_garagecheck, that is redundant. Signed-off-by: Ming Liu <liu.ming50@gmail.com>
* meta: replace bberror with bbfatalMing Liu2018-11-242-10/+6
| | | | | | | | | When calling bbfatal, it reports error message and exit 1, it should be used to replace of 'bberror && exit 1' to avoid being redundant. Also fixed some incorrect bberror usages and typos. Signed-off-by: Ming Liu <liu.ming50@gmail.com>
* Allow setup custom hardware_idfeat/hardware_idSerhiy Stetskovych2018-11-222-2/+3
| | | | Signed-off-by: Serhiy Stetskovych <patriotyk@gmail.com>
* Merge pull request #431 from albard00/masterPatrick Vacek2018-11-131-2/+2
|\ | | | | Fix function name conflict
| * Fix function name conflictAlexandre Bard2018-11-131-2/+2
| | | | | | | | | | | | | | | | | | buildinfo function name is used in poky: meta/classes/image-buildinfo.bbclass Both classes could not be used together Signed-off-by: Alexandre Bard <alexandre.bard@netmodule.com>
* | aktualizr: Fix virtual secondary support.Patrick Vacek2018-11-131-5/+0
|/ | | | | | | | Use /etc/sota/ecus as using /var/sota/ecus was conflicting with the provisioning recipes that also use /var/sota. Not totally ideal, but the best compromise I could find. Signed-off-by: Patrick Vacek <patrickvacek@gmail.com>
* Merge pull request #421 from agners/master-toradexPatrick Vacek2018-11-021-1/+2
|\ | | | | classes: image_types_ostree: use locking during OSTree repo update
| * classes: image_types_ostree: use locking during OSTree repo updateStefan Agner2018-11-021-0/+1
| | | | | | | | | | | | | | | | The OSTree repository might be shared accross several individual OSTree builders. Use bitbakes lockfiles mechanism to lock the OSTree for exclusive use. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * classes: image_types_ostree: check OSTree repo existence using ostreeStefan Agner2018-11-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Currently we assume if the OSTree repo exists, that there is a OSTree repo in it. This does not need to be true in general, and when using lockfiles bitbake will create the directory before the do_image_ostree task is executed the first time. Use ostree refs to detect whether the target directory contains a OSTree repo. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* | Document version overriding and add warningsAnton Gerasimov2018-10-302-2/+3
| |
* | Provide example for setting UPTANE target version automaticallyAnton Gerasimov2018-10-303-1/+16
|/
* Merge pull request #410 from agners/use-imgdeploydirOYTIS2018-10-251-12/+3
|\ | | | | Use IMGDEPLOYDIR
| * image_types_ota: use IMGDEPLOYDIR for ota-ext4 imagesStefan Agner2018-10-181-6/+2
| | | | | | | | | | | | | | | | | | | | | | Do not write directly to the IMAGE_DEPLOY_DIR but to the new deploy directory IMGDEPLOYDIR. Also change the image ending to match the image type name (from otaimg to ota-ext4). This allows to use the automatic symlinking and output artefact management too. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * image_types_ota: use IMGDEPLOYDIR for ota-tar imagesStefan Agner2018-10-181-6/+1
| | | | | | | | | | | | | | | | Do not write directly to the IMAGE_DEPLOY_DIR but to the new deploy directory IMGDEPLOYDIR. This allows to use the automatic symlinking too. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* | Merge pull request #407 from LukaPivk/masterlbonn2018-10-251-1/+10
|\ \ | |/ |/| Extend ostree support
| * Added support to automatically update ostree summaryLuka Pivk2018-10-241-1/+6
| | | | | | | | | | | | | | Use OSTREE_UPDATE_SUMMARY to automatically update summary after committing to ostree repo Signed-off-by: Luka Pivk <luka.pivk@toradex.com>
| * Added support to set custom commit subject and bodyLuka Pivk2018-10-241-2/+6
| | | | | | | | | | | | | | Use OSTREE_COMMIT_BODY write custom text to ostree body Use OSTREE_COMMIT_SUBJECT to write custom subject Signed-off-by: Luka Pivk <luka.pivk@toradex.com>
* | image_types_ota: simplify image creationStefan Agner2018-10-121-28/+15
| | | | | | | | | | | | | | | | Almost all code in create_ota is either tar or ext4 specific. Move the code directly into the respective IMAGE_CMD_ functions. This gets rid of unnecessary work for the tar image and simplifies code. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* | image_types_ota: remove explicit IMAGE_FSTYPES checkStefan Agner2018-10-121-9/+2
|/ | | | | | | OpenEmbedded makes sure that IMAGE_CMD_type gets only called if the type is in IMAGE_FSTYPE. There is no need to explicitly check for it. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* Add SOTA_DEPLOY_CREDENTIALS variable to control whether the built image ↵Anton Gerasimov2018-10-011-0/+2
| | | | should be provisioned
* Add support for rollback on Raspberry PiAnton Gerasimov2018-09-181-0/+2
|
* Update `installed_versions` passing to new locationLaurent Bonnans2018-09-181-2/+3
|
* Don't commit credentials to OSTree repositorybugfix/OTA-852/pushcredentialsAnton Gerasimov2018-09-122-3/+11
|
* Update fitimage initramfs image namefix/OTA-638/rpi-masterLaurent Bonnans2018-09-041-1/+1
| | | | | | From poky master This fixes image builds but does not boot yet...
* Add back dependency on INITRAMFS_IMAGE:do_image_completefit-initramfs-supportPhil Wise2018-08-141-0/+1
| | | | | | | Without this the build fails because the initramfs hasn't been build before do_image_ostree. There should be a dependency through virtual/kernel:do_deploy, but there is clearly some reason why this isn't enough.
* classes: image_types_ostree: Fix copying standalone initramfsYevgeny Popovych2018-08-141-1/+1
| | | | Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-13 23:38:21 +0000