10 files changed, 39 insertions, 223 deletions

diff --git a/classes/image_repo_manifest.bbclass b/classes/image_repo_manifest.bbclass
new file mode 100644
index 0000000..d508574
--- /dev/null
+++ b/classes/image_repo_manifest.bbclass
@@ -0,0 +1,23 @@
+# Writes the repo manifest to the target filesystem in /etc/manifest.xml
+#
+# Author: Phil Wise <phil@advancedtelematic.com>
+# Usage: add "inherit image_repo_manifest" to your image file
+# To reproduce a build, copy the /etc/manifest.xml to .repo/manifests/yourname.xml
+# then run:
+# repo init -m yourname.xml
+# repo sync
+# For more information, see:
+# https://web.archive.org/web/20161224194009/https://wiki.cyanogenmod.org/w/Doc:_Using_manifests 
+
+HOSTTOOLS_NONFATAL += " repo "
+
+# Write build information to target filesystem
+buildinfo () {
+  if [ $(which repo) ]; then
+    repo manifest --revision-as-HEAD -o ${IMAGE_ROOTFS}${sysconfdir}/manifest.xml
+  else
+    echo "Android repo tool not food; manifest not copied."
+  fi
+}
+
+IMAGE_PREPROCESS_COMMAND += "buildinfo;"
diff --git a/classes/sdcard_image-rpi-ota.bbclass b/classes/sdcard_image-rpi-ota.bbclass
deleted file mode 100644
index 9c859fe..0000000
--- a/classes/sdcard_image-rpi-ota.bbclass
+++ /dev/null
@@ -1,190 +0,0 @@
-inherit image_types
-inherit linux-raspberrypi-base
-
-#
-# Create an image that can by written onto a SD card using dd.
-#
-# The disk layout used is:
-#
-#    0                      -> IMAGE_ROOTFS_ALIGNMENT         - reserved for other data
-#    IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE                     - bootloader and kernel
-#    BOOT_SPACE             -> SDIMG_OTA_SIZE                 - rootfs
-#
-
-#                                                     Default Free space = 1.3x
-#                                                     Use IMAGE_OVERHEAD_FACTOR to add more space
-#                                                     <--------->
-#            4MiB              40MiB           SDIMG_OTA_ROOTFS
-# <-----------------------> <----------> <---------------------->
-#  ------------------------ ------------ ------------------------
-# | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | OTAROOT_SIZE           |
-#  ------------------------ ------------ ------------------------
-# ^                        ^            ^                        ^
-# |                        |            |                        |
-# 0                      4MiB     4MiB + 40MiB       4MiB + 40Mib + SDIMG_OTA_ROOTFS
-
-# This image depends on the rootfs image
-IMAGE_TYPEDEP_rpi-sdimg-ota = "${SDIMG_OTA_ROOTFS_TYPE}"
-
-# Set kernel and boot loader
-IMAGE_BOOTLOADER ?= "bcm2835-bootfiles"
-
-# Set initramfs extension
-KERNEL_INITRAMFS ?= ""
-
-# Kernel image name
-SDIMG_OTA_KERNELIMAGE_raspberrypi  ?= "kernel.img"
-SDIMG_OTA_KERNELIMAGE_raspberrypi2 ?= "kernel7.img"
-SDIMG_OTA_KERNELIMAGE_raspberrypi3 ?= "kernel7.img"
-
-# Boot partition volume id
-BOOTDD_VOLUME_ID ?= "${MACHINE}"
-
-# Boot partition size [in KiB] (will be rounded up to IMAGE_ROOTFS_ALIGNMENT)
-BOOT_SPACE ?= "40960"
-
-# Set alignment to 4MB [in KiB]
-IMAGE_ROOTFS_ALIGNMENT = "4096"
-
-# Use an uncompressed ext3 by default as rootfs
-SDIMG_OTA_ROOTFS_TYPE ?= "otaimg"
-SDIMG_OTA_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.${SDIMG_OTA_ROOTFS_TYPE}"
-
-IMAGE_DEPENDS_rpi-sdimg-ota = " \
-                        parted-native \
-                        mtools-native \
-                        dosfstools-native \
-                        virtual/kernel:do_deploy \
-                        ${IMAGE_BOOTLOADER} \
-                        u-boot \
-                        "
-IMAGE_TYPEDEP_rpi-sdimg-ota = "otaimg"
-
-# SD card image name
-SDIMG_OTA = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.rpi-sdimg-ota"
-
-# Compression method to apply to SDIMG_OTA after it has been created. Supported
-# compression formats are "gzip", "bzip2" or "xz". The original .rpi-sdimg-ota file
-# is kept and a new compressed file is created if one of these compression
-# formats is chosen. If SDIMG_OTA_COMPRESSION is set to any other value it is
-# silently ignored.
-#SDIMG_OTA_COMPRESSION ?= ""
-
-# Additional files and/or directories to be copied into the vfat partition from the IMAGE_ROOTFS.
-FATPAYLOAD ?= ""
-
-IMAGE_CMD_rpi-sdimg-ota () {
-
-        # Align partitions
-        OTAROOT_SIZE=`du -Lb ${SDIMG_OTA_ROOTFS} | cut -f1`
-        OTAROOT_SIZE=$(expr ${OTAROOT_SIZE} / 1024 + 1)
-        BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
-        BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-        SDIMG_OTA_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $OTAROOT_SIZE)
-
-        echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $OTAROOT_SIZE KiB"
-
-        # Check if we are building with device tree support
-        DTS="${@get_dts(d, None)}"
-
-        # Initialize sdcard image file
-        dd if=/dev/zero of=${SDIMG_OTA} bs=1024 count=0 seek=${SDIMG_OTA_SIZE}
-
-        # Create partition table
-        parted -s ${SDIMG_OTA} mklabel msdos
-        # Create boot partition and mark it as bootable
-        parted -s ${SDIMG_OTA} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
-        parted -s ${SDIMG_OTA} set 1 boot on
-        # Create rootfs partition to the end of disk
-        parted -s ${SDIMG_OTA} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
-        parted ${SDIMG_OTA} print
-
-        # Create a vfat image with boot files
-        BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG_OTA} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
-        rm -f ${WORKDIR}/boot.img
-        mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
-        sync
-
-        mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/
-        
-        if test -n "${DTS}"; then
-                # Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' string and will be put in a dedicated folder
-                DT_OVERLAYS="${@split_overlays(d, 0)}"
-                DT_ROOT="${@split_overlays(d, 1)}"
-
-                # Copy board device trees to root folder
-                for DTB in ${DT_ROOT}; do
-                        DTB_BASE_NAME=`basename ${DTB} .dtb`
-
-                        mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb
-                done
-
-                # Copy device tree overlays to dedicated folder
-                mmd -i ${WORKDIR}/boot.img overlays
-                for DTB in ${DT_OVERLAYS}; do
-                        DTB_EXT=${DTB##*.}
-                        DTB_BASE_NAME=`basename ${DTB} ."${DTB_EXT}"`
-
-                        mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.${DTB_EXT} ::overlays/${DTB_BASE_NAME}.${DTB_EXT}
-                done
-        fi
-
-        case "${KERNEL_IMAGETYPE}" in
-        "uImage")
-                mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_OTA_KERNELIMAGE}
-                ;;
-        *)
-                bbfatal "Kernel uImage is required for OTA image. Please set KERNEL_IMAGETYPE to \"uImage\""
-                ;;
-        esac
-
-        if [ -n ${FATPAYLOAD} ] ; then
-                echo "Copying payload into VFAT"
-                for entry in ${FATPAYLOAD} ; do
-                                # add the || true to stop aborting on vfat issues like not supporting .~lock files
-                                mcopy -i ${WORKDIR}/boot.img -s -v ${IMAGE_ROOTFS}$entry :: || true
-                done
-        fi
-
-        # Add stamp file
-        echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info
-        mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
-
-        # Burn Partitions
-        sync
-        dd if=${WORKDIR}/boot.img of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-        # If SDIMG_OTA_ROOTFS_TYPE is a .xz file use xzcat
-        if echo "${SDIMG_OTA_ROOTFS_TYPE}" | egrep -q "*\.xz"
-        then
-                xzcat ${SDIMG_OTA_ROOTFS} | dd of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-        else
-                dd if=${SDIMG_OTA_ROOTFS} of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-        fi
-
-        # Optionally apply compression
-        case "${SDIMG_OTA_COMPRESSION}" in
-        "gzip")
-                gzip -k9 "${SDIMG_OTA}"
-                ;;
-        "bzip2")
-                bzip2 -k9 "${SDIMG_OTA}"
-                ;;
-        "xz")
-                xz -k "${SDIMG_OTA}"
-                ;;
-        esac
-}
-
-ROOTFS_POSTPROCESS_COMMAND += " rpi_generate_sysctl_config ; "
-
-rpi_generate_sysctl_config() {
-        # systemd sysctl config
-        test -d ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d && \
-                echo "vm.min_free_kbytes = 8192" > ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d/rpi-vm.conf
-
-        # sysv sysctl config
-        IMAGE_SYSCTL_CONF="${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf"
-        test -e ${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf && \
-                sed -e "/vm.min_free_kbytes/d" -i ${IMAGE_SYSCTL_CONF}
-        echo "" >> ${IMAGE_SYSCTL_CONF} && echo "vm.min_free_kbytes = 8192" >> ${IMAGE_SYSCTL_CONF}
-}
diff --git a/classes/sota.bbclass b/classes/sota.bbclass
index f191cee..1865356 100644
--- a/classes/sota.bbclass
+++ b/classes/sota.bbclass
@@ -35,3 +35,5 @@ SOTA_MACHINE_qemux86-64 ?= "qemux86-64"
 SOTA_MACHINE_am335x-evm ?= "am335x-evm-wifi"
 
 inherit sota_${SOTA_MACHINE}
+
+inherit image_repo_manifest
diff --git a/classes/sota_am335x-evm-wifi.bbclass b/classes/sota_am335x-evm-wifi.bbclass
index 821e8fb..adefb47 100644
--- a/classes/sota_am335x-evm-wifi.bbclass
+++ b/classes/sota_am335x-evm-wifi.bbclass
@@ -1,5 +1,3 @@
-IMAGE_CLASSES += "image_types_uboot"
-
 KERNEL_IMAGETYPE_sota = "uImage"
 
 OSTREE_BOOTLOADER ?= "u-boot"
diff --git a/classes/sota_m3ulcb.bbclass b/classes/sota_m3ulcb.bbclass
index 21d04ba..6b63af4 100644
--- a/classes/sota_m3ulcb.bbclass
+++ b/classes/sota_m3ulcb.bbclass
@@ -2,7 +2,6 @@
 OSTREE_KERNEL = "Image"
 
 EXTRA_IMAGEDEPENDS_append_sota = " m3ulcb-ota-bootfiles"
-IMAGE_CLASSES_append_sota = " image_types_uboot "
 IMAGE_BOOT_FILES_sota += "m3ulcb-ota-bootfiles/*"
 
 OSTREE_BOOTLOADER ?= "u-boot"
diff --git a/classes/sota_porter.bbclass b/classes/sota_porter.bbclass
index a8f5ba1..75ae579 100644
--- a/classes/sota_porter.bbclass
+++ b/classes/sota_porter.bbclass
@@ -2,7 +2,6 @@
 OSTREE_KERNEL = "uImage+dtb"
 
 EXTRA_IMAGEDEPENDS_append_sota = " porter-bootfiles"
-IMAGE_CLASSES_append_sota = " image_types_uboot "
 IMAGE_BOOT_FILES_sota += "porter-bootfiles/*"
 
 OSTREE_BOOTLOADER ?= "u-boot"
diff --git a/classes/sota_raspberrypi.bbclass b/classes/sota_raspberrypi.bbclass
index cc6b666..51d07b2 100644
--- a/classes/sota_raspberrypi.bbclass
+++ b/classes/sota_raspberrypi.bbclass
@@ -1,11 +1,9 @@
-IMAGE_CLASSES += "${@bb.utils.contains('DISTRO_FEATURES', 'sota', 'image_types_uboot sdcard_image-rpi-ota', '', d)}"
-IMAGE_FSTYPES += "${@bb.utils.contains('DISTRO_FEATURES', 'sota', 'rpi-sdimg-ota.xz', 'rpi-sdimg.xz', d)}"
-
-IMAGE_FSTYPES_remove = "${@bb.utils.contains('DISTRO_FEATURES', 'sota', 'wic rpi-sdimg rpi-sdimg.xz', '', d)}"
-
 KERNEL_IMAGETYPE_sota = "uImage"
 PREFERRED_PROVIDER_virtual/bootloader_sota ?= "u-boot"
 UBOOT_MACHINE_raspberrypi2_sota ?= "rpi_2_defconfig"
 UBOOT_MACHINE_raspberrypi3_sota ?= "rpi_3_32b_defconfig"
 
 OSTREE_BOOTLOADER ?= "u-boot"
+
+# OSTree puts its own boot.scr to bcm2835-bootfiles
+IMAGE_BOOT_FILES_remove_sota += "boot.scr"
diff --git a/recipes-core/images/initramfs-ostree-image.bb b/recipes-core/images/initramfs-ostree-image.bb
index 4870579..4ab9da8 100644
--- a/recipes-core/images/initramfs-ostree-image.bb
+++ b/recipes-core/images/initramfs-ostree-image.bb
@@ -15,7 +15,6 @@ LICENSE = "MIT"
 
 IMAGE_FSTYPES = "ext4.gz"
 IMAGE_FSTYPES_append_arm = " ext4.gz.u-boot"
-IMAGE_CLASSES_append_arm = " image_types_uboot"
 
 inherit core-image
 
diff --git a/scripts/lib/wic/plugins/source/otaimage.py b/scripts/lib/wic/plugins/source/otaimage.py
index eef0bb4..26cfb10 100644
--- a/scripts/lib/wic/plugins/source/otaimage.py
+++ b/scripts/lib/wic/plugins/source/otaimage.py
@@ -19,10 +19,12 @@ import logging
 import os
 import sys
 
-from wic.pluginbase import SourcePlugin
+from wic.plugins.source.rawcopy import RawCopyPlugin
 from wic.utils.misc import get_bitbake_var
 
-class OTAImagePlugin(SourcePlugin):
+logger = logging.getLogger('wic')
+
+class OTAImagePlugin(RawCopyPlugin):
     """
     Add an already existing filesystem image to the partition layout.
     """
@@ -30,25 +32,6 @@ class OTAImagePlugin(SourcePlugin):
     name = 'otaimage'
 
     @classmethod
-    def do_install_disk(cls, disk, disk_name, cr, workdir, oe_builddir,
-                        bootimg_dir, kernel_dir, native_sysroot):
-        """
-        Called after all partitions have been prepared and assembled into a
-        disk image. Do nothing.
-        """
-        pass
-
-    @classmethod
-    def do_configure_partition(cls, part, source_params, cr, cr_workdir,
-                               oe_builddir, bootimg_dir, kernel_dir,
-                               native_sysroot):
-        """
-        Called before do_prepare_partition(). Possibly prepare
-        configuration files of some sort.
-        """
-        pass
-
-    @classmethod
     def do_prepare_partition(cls, part, source_params, cr, cr_workdir,
                              oe_builddir, bootimg_dir, kernel_dir,
                              rootfs_dir, native_sysroot):
@@ -65,5 +48,10 @@ class OTAImagePlugin(SourcePlugin):
         src = bootimg_dir + "/" + get_bitbake_var("IMAGE_LINK_NAME") + ".otaimg"
 
         logger.debug('Preparing partition using image %s' % (src))
-        part.prepare_rootfs_from_fs_image(cr_workdir, src, "")
+        source_params['file'] = src
+
+        super(OTAImagePlugin, cls).do_prepare_partition(part, source_params,
+                                                         cr, cr_workdir, oe_builddir,
+                                                         bootimg_dir, kernel_dir,
+                                                         rootfs_dir, native_sysroot)
 
diff --git a/scripts/run-qemu-ota b/scripts/run-qemu-ota
index 5334814..641296c 100755
--- a/scripts/run-qemu-ota
+++ b/scripts/run-qemu-ota
@@ -161,7 +161,7 @@ def main():
         if args.dry_run:
             print(" ".join(img_cmdline))
         else:
-            Popen(img_cmdline)
+            Popen(img_cmdline).wait()
 
     if args.dry_run:
         print(" ".join(cmdline))