From 51a7587cde6e7380181907caee86b2cff678f5b6 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Wed, 2 Nov 2011 16:14:46 +0100 Subject: matrix: sync with arago Signed-off-by: Koen Kooi --- recipes-ti/matrix/matrix-gui-clocks_1.0.bb | 34 - recipes-ti/matrix/matrix-gui-clocks_1.1.bb | 34 + recipes-ti/matrix/matrix-gui-crypto-demos_1.0.bb | 20 - recipes-ti/matrix/matrix-gui-crypto-demos_1.2.bb | 19 + .../matrix/matrix-gui-display-control_1.0.bb | 7 +- recipes-ti/matrix/matrix-gui-paths.inc | 3 +- recipes-ti/matrix/matrix-gui-pm-demos_1.0.bb | 7 +- recipes-ti/matrix/matrix-gui-submenus_1.0.bb | 80 +- recipes-ti/matrix/matrix-gui-wifi-demos_1.0.bb | 20 - recipes-ti/matrix/matrix-gui-wifi-demos_1.1.bb | 19 + recipes-ti/matrix/matrix-gui/php.ini | 1342 ++++++++++++++++++++ recipes-ti/matrix/matrix-gui_2.0.bb | 17 +- 12 files changed, 1475 insertions(+), 127 deletions(-) delete mode 100644 recipes-ti/matrix/matrix-gui-clocks_1.0.bb create mode 100644 recipes-ti/matrix/matrix-gui-clocks_1.1.bb delete mode 100644 recipes-ti/matrix/matrix-gui-crypto-demos_1.0.bb create mode 100644 recipes-ti/matrix/matrix-gui-crypto-demos_1.2.bb delete mode 100644 recipes-ti/matrix/matrix-gui-wifi-demos_1.0.bb create mode 100644 recipes-ti/matrix/matrix-gui-wifi-demos_1.1.bb create mode 100644 recipes-ti/matrix/matrix-gui/php.ini (limited to 'recipes-ti') diff --git a/recipes-ti/matrix/matrix-gui-clocks_1.0.bb b/recipes-ti/matrix/matrix-gui-clocks_1.0.bb deleted file mode 100644 index 177a617b..00000000 --- a/recipes-ti/matrix/matrix-gui-clocks_1.0.bb +++ /dev/null @@ -1,34 +0,0 @@ -DESCRIPTION = "Clock setting descriptions for Matrix v2" -HOMEPAGE = "https://gforge.ti.com/gf/project/matrixguiv2apps/" -LICENSE = "CC-BY-SA" - -inherit allarch - -SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/612/5031/clocks_1.0.tar.gz" - -S = ${WORKDIR}/clocks - -require matrix-gui-apps.inc - -# Make sure power submenu has been installed -RDEPENDS += matrix-gui-submenus-power - -# Break out the individual files into separate packages. That way only the -# clocks supported for each device can be installed. Prepend the list so -# that we can get the files in ${bindir} first -PACKAGES =+ "${PN}-300mhz ${PN}-600mhz ${PN}-800mhz ${PN}-1ghz" - -# Split the matrix files by clock -FILES_${PN}-300mhz += "${MATRIX_APP_DIR}/power_set_300mhz/*" -FILES_${PN}-600mhz += "${MATRIX_APP_DIR}/power_set_600mhz/*" -FILES_${PN}-800mhz += "${MATRIX_APP_DIR}/power_set_800mhz/*" -FILES_${PN}-1ghz += "${MATRIX_APP_DIR}/power_set_1ghz/*" - -# Split the ${bindir} files by clock -FILES_${PN}-300mhz += "${bindir}/setopp2.sh" -FILES_${PN}-600mhz += "${bindir}/setopp3.sh" -FILES_${PN}-800mhz += "${bindir}/setopp4.sh" -FILES_${PN}-1ghz += "${bindir}/setopp1.sh" - -SRC_URI[md5sum] = "9e76951feab2ecd9334e9c890426500f" -SRC_URI[sha256sum] = "96dc90fffe45fc4bb499215f57c416d16ff874290d6b2f16b9e2fdbcb9c18cbe" diff --git a/recipes-ti/matrix/matrix-gui-clocks_1.1.bb b/recipes-ti/matrix/matrix-gui-clocks_1.1.bb new file mode 100644 index 00000000..2fb7d1d3 --- /dev/null +++ b/recipes-ti/matrix/matrix-gui-clocks_1.1.bb @@ -0,0 +1,34 @@ +DESCRIPTION = "Clock setting descriptions for Matrix v2" +HOMEPAGE = "https://gforge.ti.com/gf/project/matrixguiv2apps/" +LICENSE = "CC-BY-SA" + +inherit allarch + +SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/673/5096/clocks_1.1.tar.gz" + +S = ${WORKDIR}/clocks + +require matrix-gui-apps.inc + +# Make sure power submenu has been installed +RDEPENDS += matrix-gui-submenus-power + +# Break out the individual files into separate packages. That way only the +# clocks supported for each device can be installed. Prepend the list so +# that we can get the files in ${bindir} first +PACKAGES =+ "${PN}-300mhz ${PN}-600mhz ${PN}-800mhz ${PN}-1ghz" + +# Split the matrix files by clock +FILES_${PN}-300mhz += "${MATRIX_APP_DIR}/power_set_300mhz/*" +FILES_${PN}-600mhz += "${MATRIX_APP_DIR}/power_set_600mhz/*" +FILES_${PN}-800mhz += "${MATRIX_APP_DIR}/power_set_800mhz/*" +FILES_${PN}-1ghz += "${MATRIX_APP_DIR}/power_set_1ghz/*" + +# Split the ${bindir} files by clock +FILES_${PN}-300mhz += "${bindir}/setopp2.sh" +FILES_${PN}-600mhz += "${bindir}/setopp3.sh" +FILES_${PN}-800mhz += "${bindir}/setopp4.sh" +FILES_${PN}-1ghz += "${bindir}/setopp1.sh" + +SRC_URI[md5sum] = "6d50592e364f39d7ed3b2805e6c227cb" +SRC_URI[sha256sum] = "ab51df1651a391e3f6a947faccf45354ef187508c65cb3de92cc9fef88206e65" diff --git a/recipes-ti/matrix/matrix-gui-crypto-demos_1.0.bb b/recipes-ti/matrix/matrix-gui-crypto-demos_1.0.bb deleted file mode 100644 index 13e97061..00000000 --- a/recipes-ti/matrix/matrix-gui-crypto-demos_1.0.bb +++ /dev/null @@ -1,20 +0,0 @@ -DESCRIPTION = "Cryptography demo descriptions for Matrix v2" -HOMEPAGE = "https://gforge.ti.com/gf/project/matrixguiv2apps/" -LICENSE = "CC-BY-SA" - - -inherit allarch - -SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/609/5033/cryptodemos_1.0.tar.gz" - -S = ${WORKDIR}/cryptodemos - -require matrix-gui-apps.inc - -# Make sure crypto submenu has been installed and openssl is available -RDEPENDS += "matrix-gui-submenus-cryptos openssl" - -FILES_${PN} += "${MATRIX_BASE_DIR}/*" - -SRC_URI[md5sum] = "17a640f9d8a18694a67a8c2e473d1a2d" -SRC_URI[sha256sum] = "9d1724e33dfe93a38fe70e517b3e3e0a641c993ebd5f56cc54317b351b3ba06a" diff --git a/recipes-ti/matrix/matrix-gui-crypto-demos_1.2.bb b/recipes-ti/matrix/matrix-gui-crypto-demos_1.2.bb new file mode 100644 index 00000000..dfc3a937 --- /dev/null +++ b/recipes-ti/matrix/matrix-gui-crypto-demos_1.2.bb @@ -0,0 +1,19 @@ +DESCRIPTION = "Cryptography demo descriptions for Matrix v2" +HOMEPAGE = "https://gforge.ti.com/gf/project/matrixguiv2apps/" +LICENSE = "CC-BY-SA" + +inherit allarch + +SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/688/5114/cryptodemos_1.2.tar.gz" + +S = ${WORKDIR}/cryptodemos + +require matrix-gui-apps.inc + +# Make sure crypto submenu has been installed and openssl is available +RDEPENDS += "matrix-gui-submenus-cryptos openssl" + +FILES_${PN} += "${MATRIX_BASE_DIR}/*" + +SRC_URI[md5sum] = "dfab3e918fee165fb24e00cba5db8918" +SRC_URI[sha256sum] = "44fa00ce999279c10a51718298157d3006afb018f6f327f1803006b5e7068c8c" diff --git a/recipes-ti/matrix/matrix-gui-display-control_1.0.bb b/recipes-ti/matrix/matrix-gui-display-control_1.0.bb index c9f1bdb7..09b68b36 100644 --- a/recipes-ti/matrix/matrix-gui-display-control_1.0.bb +++ b/recipes-ti/matrix/matrix-gui-display-control_1.0.bb @@ -2,10 +2,11 @@ DESCRIPTION = "Display control descriptions for Matrix v2" HOMEPAGE = "https://gforge.ti.com/gf/project/matrixguiv2apps/" LICENSE = "CC-BY-SA" +PR = "r1" inherit allarch -SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/611/5034/displaycontrol_1.0.tar.gz" +SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/674/5097/displaycontrol_1.1.tar.gz" S = ${WORKDIR}/displaycontrol @@ -16,5 +17,5 @@ RDEPENDS += matrix-gui-submenus-display FILES_${PN} += "${MATRIX_BASE_DIR}/*" -SRC_URI[md5sum] = "65b45c9a55395c6a574ca720fc47c628" -SRC_URI[sha256sum] = "e8b8dee2ddf66f96b0420988e7cd3220306168887f78043e5aa4497388e77798" +SRC_URI[md5sum] = "1032490affff638b993367ce5a451298" +SRC_URI[sha256sum] = "78d3a6e1e74acb55a927cc7e087cd15c33767cfaf9458200aa863025cee32f2e" diff --git a/recipes-ti/matrix/matrix-gui-paths.inc b/recipes-ti/matrix/matrix-gui-paths.inc index b5ad8e02..8c6e5682 100644 --- a/recipes-ti/matrix/matrix-gui-paths.inc +++ b/recipes-ti/matrix/matrix-gui-paths.inc @@ -1,2 +1,3 @@ export MATRIX_BASE_DIR = "${datadir}/matrix-gui-2.0" -export MATRIX_APP_DIR = "${MATRIX_BASE_DIR}/apps" +export MATRIX_WEB_DIR = "${MATRIX_BASE_DIR}" +export MATRIX_APP_DIR = "${MATRIX_WEB_DIR}/apps" diff --git a/recipes-ti/matrix/matrix-gui-pm-demos_1.0.bb b/recipes-ti/matrix/matrix-gui-pm-demos_1.0.bb index 85d251fc..70e72f93 100644 --- a/recipes-ti/matrix/matrix-gui-pm-demos_1.0.bb +++ b/recipes-ti/matrix/matrix-gui-pm-demos_1.0.bb @@ -2,10 +2,11 @@ DESCRIPTION = "Power management demo descriptions for Matrix v2" HOMEPAGE = "https://gforge.ti.com/gf/project/matrixguiv2apps/" LICENSE = "CC-BY-SA" +PR = "r1" inherit allarch -SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/610/5035/pmdemos_1.0.tar.gz" +SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/676/5099/pmdemos_1.1.tar.gz" S = ${WORKDIR}/pmdemos @@ -16,5 +17,5 @@ RDEPENDS += matrix-gui-submenus-power FILES_${PN} += "${MATRIX_BASE_DIR}/*" -SRC_URI[md5sum] = "81ee5495fe155bad88a4ba3510bb18b9" -SRC_URI[sha256sum] = "14c36da61466b384fd196769cf4a4344a9e62440fe3389f94d27575f29c319b3" +SRC_URI[md5sum] = "f996f9754c3d140e95501d8b4134f21c" +SRC_URI[sha256sum] = "229579b71439c0ad4cff60d7ebb4065f6871db57dd5baa4a5983c9f7804655ab" diff --git a/recipes-ti/matrix/matrix-gui-submenus_1.0.bb b/recipes-ti/matrix/matrix-gui-submenus_1.0.bb index 13a0f4d7..52e80be3 100644 --- a/recipes-ti/matrix/matrix-gui-submenus_1.0.bb +++ b/recipes-ti/matrix/matrix-gui-submenus_1.0.bb @@ -3,7 +3,7 @@ HOMEPAGE = "https://gforge.ti.com/gf/project/matrixguiv2apps/" LICENSE = "CC-BY-SA" LIC_FILES_CHKSUM = "file://settings/settings.desktop;md5=a447e92dfe653e63e5b91b305e969d6c" -PR = "r3" +PR = "r7" require matrix-gui-paths.inc @@ -12,19 +12,19 @@ inherit allarch # List of submenu tarballs to use. Each tarball contains a desktop file # and PNG graphic file for the submenu. -SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/589/5037/arm.tar.gz;name=armtarball \ - https://gforge.ti.com/gf/download/frsrelease/588/5038/3d.tar.gz;name=3dtarball \ - https://gforge.ti.com/gf/download/frsrelease/591/5039/cryptos.tar.gz;name=cryptostarball \ - https://gforge.ti.com/gf/download/frsrelease/592/5040/display.tar.gz;name=displaytarball \ - https://gforge.ti.com/gf/download/frsrelease/666/5088/ethernet_1.2.tar.gz;name=ethernettarball \ - https://gforge.ti.com/gf/download/frsrelease/594/5042/multimedia.tar.gz;name=multimediatarball \ - https://gforge.ti.com/gf/download/frsrelease/595/5043/power.tar.gz;name=powertarball \ - https://gforge.ti.com/gf/download/frsrelease/596/5044/pru.tar.gz;name=prutarball \ - https://gforge.ti.com/gf/download/frsrelease/597/5045/qt4.tar.gz;name=qt4tarball \ - https://gforge.ti.com/gf/download/frsrelease/598/5046/settings.tar.gz;name=settingstarball \ - https://gforge.ti.com/gf/download/frsrelease/599/5047/usb.tar.gz;name=usbtarball \ - https://gforge.ti.com/gf/download/frsrelease/600/5048/wifi.tar.gz;name=wifitarball \ - https://gforge.ti.com/gf/download/frsrelease/662/5068/oprofile.tar.gz;name=oprofiletarball \ +SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/699/5133/arm_1.1.tar.gz;name=armtarball \ + https://gforge.ti.com/gf/download/frsrelease/698/5134/3d_1.1.tar.gz;name=3dtarball \ + https://gforge.ti.com/gf/download/frsrelease/700/5135/cryptos_1.1.tar.gz;name=cryptostarball \ + https://gforge.ti.com/gf/download/frsrelease/693/5120/display_1.2.tar.gz;name=displaytarball \ + https://gforge.ti.com/gf/download/frsrelease/692/5119/ethernet_1.4.tar.gz;name=ethernettarball \ + https://gforge.ti.com/gf/download/frsrelease/701/5136/multimedia_1.1.tar.gz;name=multimediatarball \ + https://gforge.ti.com/gf/download/frsrelease/702/5137/power_1.1.tar.gz;name=powertarball \ + https://gforge.ti.com/gf/download/frsrelease/704/5139/pru_1.1.tar.gz;name=prutarball \ + https://gforge.ti.com/gf/download/frsrelease/705/5140/qt4_1.1.tar.gz;name=qt4tarball \ + https://gforge.ti.com/gf/download/frsrelease/694/5121/settings_1.2.tar.gz;name=settingstarball \ + https://gforge.ti.com/gf/download/frsrelease/695/5122/usb_1.2.tar.gz;name=usbtarball \ + https://gforge.ti.com/gf/download/frsrelease/697/5124/wifi_1.2.tar.gz;name=wifitarball \ + https://gforge.ti.com/gf/download/frsrelease/703/5138/oprofile_1.1.tar.gz;name=oprofiletarball \ " S = ${WORKDIR} @@ -65,41 +65,41 @@ FILES_${PN}-wifi = "${MATRIX_APP_DIR}/wifi/*" FILES_${PN}-oprofile = "${MATRIX_APP_DIR}/oprofile/*" # checksums for the submenu tarballs -SRC_URI[armtarball.md5sum] = "ed7d73441e0d85e84aa6df06d86e9d72" -SRC_URI[armtarball.sha256um] = "99f9ccba0df1d8f1bfb78cf90eec8e64e961651ba6079e9c4bb21f8243d33ece" +SRC_URI[armtarball.md5sum] = "e43585674dac2d6d6860a26c2de5332c" +SRC_URI[armtarball.sha256um] = "270f82b09fcdc3d1a08570d30ff2a9085e7b61a0f6890f734c658cd6408de155" -SRC_URI[3dtarball.md5sum] = "8aa161e1836e0efcf3db657f94137a34" -SRC_URI[3dtarball.sha256um] = "b522065d288e49f50cbf1ee2c9deb76683161d82eb0429635bc66c4f26f235f1" +SRC_URI[3dtarball.md5sum] = "1cabbb75849e892a5fc7322159750f8a" +SRC_URI[3dtarball.sha256um] = "df4983c0722a9427584497f737af57c8401a6b3898f71c994a0cfe97e5ade01a" -SRC_URI[cryptostarball.md5sum] = "d1fbc3b575775557e3e150818d86373a" -SRC_URI[cryptostarball.sha256um] = "f4c1645bf858dc157d4efae3ca66e437310294bfd564bdeb89c6609ae65cadf9" +SRC_URI[cryptostarball.md5sum] = "88d4ece28e75eb28358b43729022c91a" +SRC_URI[cryptostarball.sha256um] = "7999b2e06d27c30294c104418db79a1f9652a07a066242120cb32d3f86706538" -SRC_URI[displaytarball.md5sum] = "aa72fc22aa550b48ab32e28b2f8cbbcf" -SRC_URI[displaytarball.sha256sum] = "593a7f91226b10b1f37fdf85c0d70c8aaf4a690df50ae364c422dbc2c586352b" +SRC_URI[displaytarball.md5sum] = "eff9c5ab6667525ab0c452a6319cc5d8" +SRC_URI[displaytarball.sha256sum] = "834f22c4439bdd97c04160b9e002abcddf22188a01488476b604259324ea09af" -SRC_URI[ethernettarball.md5sum] = "3e8e9e38bf6a755ea4f839f45654d29f" -SRC_URI[ethernettarball.sha256sum] = "af78982d3c1bd745eef50728b00815eb602c642b99ade83f03e4f1b51e24c188" +SRC_URI[ethernettarball.md5sum] = "ff82b9a0ce5bbf7b7672073147f415c9" +SRC_URI[ethernettarball.sha256sum] = "28e74cd7e30fff3c7cb6ac284fb39b98e73ecefa0182ab900f64d293845d51eb" -SRC_URI[multimediatarball.md5sum] = "8ef64f7b252633d6b2f74561f047f874" -SRC_URI[multimediatarball.sha256sum] = "e093c06b7bb40e51ab42ef1d896008d3ba3463629532bd0dcc1417368b73054b" +SRC_URI[multimediatarball.md5sum] = "21064503fc26611cfedf093e478440b3" +SRC_URI[multimediatarball.sha256sum] = "039d2f7fbbd29b31601cf6596268a5a43f9dd7e86ff888a9ef45515479797d3d" -SRC_URI[powertarball.md5sum] = "26ef7b4e83386a5a16a08fdb04e20047" -SRC_URI[powertarball.sha256sum] = "87b3381cffeb2951ad7ffdff8df2661ad845303ffc850fa10caf8a9b35c09da5" +SRC_URI[powertarball.md5sum] = "406a838e12d7f83bc5a004e748ceb660" +SRC_URI[powertarball.sha256sum] = "d6c0bc690c1f45cc81fa1673dad08bea03f799adb929e5a3ec3fe4ebda60fca8" -SRC_URI[prutarball.md5sum] = "6f28ee2bc5de2bb9db035e4736f6e205" -SRC_URI[prutarball.sha256sum] = "872fc89905fab81007274aa86cd43d822c71cf799bf7de92ac9e0394ced158d1" +SRC_URI[prutarball.md5sum] = "b0eca67cdc45db2b9aa14987b4761068" +SRC_URI[prutarball.sha256sum] = "06d3acf5ba2e4d5ff796625b07b470e5cea945700c9571878b8f4ba6f171d2de" -SRC_URI[qt4tarball.md5sum] = "f724ca0c58de81477583294078f8666e" -SRC_URI[qt4tarball.sha256sum] = "75758cf90981c73603e728fd835f91b250978fb8141634f16b6e7b4ec62c08b1" +SRC_URI[qt4tarball.md5sum] = "3576ad6bc96fceb18d4d8b0850bf559d" +SRC_URI[qt4tarball.sha256sum] = "11fd5ca37d72b7129035b7f6101b4b06ac2b69d53abcd6a2751d3e9c7000dec0" -SRC_URI[settingstarball.md5sum] = "a9de5dfa9cf007f7401d5768655fef15" -SRC_URI[settingstarball.sha256sum] = "611f19671a2403f1d4f86ac46981d9297851572d867f4049d34b25c4831d2a0a" +SRC_URI[settingstarball.md5sum] = "f2634670768860954cc63309d1f4f37e" +SRC_URI[settingstarball.sha256sum] = "fb96e6e4107445e4d5d65e2475513a62e0cf5b52734c9f93e918715abcc09265" -SRC_URI[usbtarball.md5sum] = "c03096c816724a3f3ae34a92b0c8729e" -SRC_URI[usbtarball.sha256sum] = "384f733ef1b6808a29a0cfd102ab1ec766913fc88bfa587ee9fb46028835190a" +SRC_URI[usbtarball.md5sum] = "63cebc3422af0f09f3eaa0a65b25bcde" +SRC_URI[usbtarball.sha256sum] = "7178afea3b5b2926ddbf80766f1d457d7a31704869bce62ffc8db4b3d6e063e7" -SRC_URI[wifitarball.md5sum] = "f6ee538c77ac1ea7a502955e7e3cc624" -SRC_URI[wifitarball.sha256sum] = "83edd8cf1c6efbfaa8c2e25b4a984ff6587aa7e379b833810452cb47ff5a6200" +SRC_URI[wifitarball.md5sum] = "c8ae4df2521276b5b83294153825acf4" +SRC_URI[wifitarball.sha256sum] = "430f4c161eaf5dc28d524fbf4903274817023414154b2074a0b948e50724a6ff" -SRC_URI[oprofiletarball.md5sum] = "bc4f93018910817bab79eef4e0e20564" -SRC_URI[oprofiletarball.sha256sum] = "67803d1bee995496d4b632aaf2dc731d58f6826cc45b79f5545d1a8ffb3d2583" +SRC_URI[oprofiletarball.md5sum] = "02d0c9eb9fed014170f57ad30f2a5c85" +SRC_URI[oprofiletarball.sha256sum] = "ebad9018c0bd37f075a248d60e6e5520824d09afd03e71395cfc9949747e33ac" diff --git a/recipes-ti/matrix/matrix-gui-wifi-demos_1.0.bb b/recipes-ti/matrix/matrix-gui-wifi-demos_1.0.bb deleted file mode 100644 index f1041b07..00000000 --- a/recipes-ti/matrix/matrix-gui-wifi-demos_1.0.bb +++ /dev/null @@ -1,20 +0,0 @@ -DESCRIPTION = "Wifi demo descriptions for Matrix v2" -HOMEPAGE = "https://gforge.ti.com/gf/project/matrixguiv2apps/" -LICENSE = "CC-BY-SA" - - -inherit allarch - -SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/617/5049/wifi_1.0.tar.gz" - -S = ${WORKDIR}/wifi - -require matrix-gui-apps.inc - -# Make sure wifi submenu has been installed -RDEPENDS += matrix-gui-submenus-wifi - -FILES_${PN} += "${MATRIX_BASE_DIR}/*" - -SRC_URI[md5sum] = "10a57c18f0c6dcadb0371778a0959bbc" -SRC_URI[sha256sum] = "91de898d12a2f980a454a8c3f14b8165fcbd15da3cf565ea5dc80f04ad982159" diff --git a/recipes-ti/matrix/matrix-gui-wifi-demos_1.1.bb b/recipes-ti/matrix/matrix-gui-wifi-demos_1.1.bb new file mode 100644 index 00000000..be79356b --- /dev/null +++ b/recipes-ti/matrix/matrix-gui-wifi-demos_1.1.bb @@ -0,0 +1,19 @@ +DESCRIPTION = "Wifi demo descriptions for Matrix v2" +HOMEPAGE = "https://gforge.ti.com/gf/project/matrixguiv2apps/" +LICENSE = "CC-BY-SA" + +inherit allarch + +SRC_URI = "https://gforge.ti.com/gf/download/frsrelease/678/5101/wifidemos_1.1.tar.gz" + +S = ${WORKDIR}/wifidemos + +require matrix-gui-apps.inc + +# Make sure wifi submenu has been installed +RDEPENDS += matrix-gui-submenus-wifi + +FILES_${PN} += "${MATRIX_BASE_DIR}/*" + +SRC_URI[md5sum] = "60d85261bcad85da7ecd024613343068" +SRC_URI[sha256sum] = "36fe8bbc461e157b00ebf8f9deab1e5c83eef2f618bc98f2956d974e76534c56" diff --git a/recipes-ti/matrix/matrix-gui/php.ini b/recipes-ti/matrix/matrix-gui/php.ini new file mode 100644 index 00000000..900a86b8 --- /dev/null +++ b/recipes-ti/matrix/matrix-gui/php.ini @@ -0,0 +1,1342 @@ +[PHP] + +;;;;;;;;;;;;;;;;;;; +; About php.ini ; +;;;;;;;;;;;;;;;;;;; +; This file controls many aspects of PHP's behavior. In order for PHP to +; read it, it must be named 'php.ini'. PHP looks for it in the current +; working directory, in the path designated by the environment variable +; PHPRC, and in the path that was defined in compile time (in that order). +; Under Windows, the compile-time path is the Windows directory. The +; path in which the php.ini file is looked for can be overridden using +; the -c argument in command line mode. +; +; The syntax of the file is extremely simple. Whitespace and Lines +; beginning with a semicolon are silently ignored (as you probably guessed). +; Section headers (e.g. [Foo]) are also silently ignored, even though +; they might mean something in the future. +; +; Directives are specified using the following syntax: +; directive = value +; Directive names are *case sensitive* - foo=bar is different from FOO=bar. +; +; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one +; of the INI constants (On, Off, True, False, Yes, No and None) or an expression +; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo"). +; +; Expressions in the INI file are limited to bitwise operators and parentheses: +; | bitwise OR +; & bitwise AND +; ~ bitwise NOT +; ! boolean NOT +; +; Boolean flags can be turned on using the values 1, On, True or Yes. +; They can be turned off using the values 0, Off, False or No. +; +; An empty string can be denoted by simply not writing anything after the equal +; sign, or by using the None keyword: +; +; foo = ; sets foo to an empty string +; foo = none ; sets foo to an empty string +; foo = "none" ; sets foo to the string 'none' +; +; If you use constants in your value, and these constants belong to a +; dynamically loaded extension (either a PHP extension or a Zend extension), +; you may only use these constants *after* the line that loads the extension. +; +; +;;;;;;;;;;;;;;;;;;; +; About this file ; +;;;;;;;;;;;;;;;;;;; +; This is the recommended, PHP 5-style version of the php.ini-dist file. It +; sets some non standard settings, that make PHP more efficient, more secure, +; and encourage cleaner coding. +; +; The price is that with these settings, PHP may be incompatible with some +; applications, and sometimes, more difficult to develop with. Using this +; file is warmly recommended for production sites. As all of the changes from +; the standard settings are thoroughly documented, you can go over each one, +; and decide whether you want to use it or not. +; +; For general information about the php.ini file, please consult the php.ini-dist +; file, included in your PHP distribution. +; +; This file is different from the php.ini-dist file in the fact that it features +; different values for several directives, in order to improve performance, while +; possibly breaking compatibility with the standard out-of-the-box behavior of +; PHP. Please make sure you read what's different, and modify your scripts +; accordingly, if you decide to use this file instead. +; +; - register_long_arrays = Off [Performance] +; Disables registration of the older (and deprecated) long predefined array +; variables ($HTTP_*_VARS). Instead, use the superglobals that were +; introduced in PHP 4.1.0 +; - display_errors = Off [Security] +; With this directive set to off, errors that occur during the execution of +; scripts will no longer be displayed as a part of the script output, and thus, +; will no longer be exposed to remote users. With some errors, the error message +; content may expose information about your script, web server, or database +; server that may be exploitable for hacking. Production sites should have this +; directive set to off. +; - log_errors = On [Security] +; This directive complements the above one. Any errors that occur during the +; execution of your script will be logged (typically, to your server's error log, +; but can be configured in several ways). Along with setting display_errors to off, +; this setup gives you the ability to fully understand what may have gone wrong, +; without exposing any sensitive information to remote users. +; - output_buffering = 4096 [Performance] +; Set a 4KB output buffer. Enabling output buffering typically results in less +; writes, and sometimes less packets sent on the wire, which can often lead to +; better performance. The gain this directive actually yields greatly depends +; on which Web server you're working with, and what kind of scripts you're using. +; - register_argc_argv = Off [Performance] +; Disables registration of the somewhat redundant $argv and $argc global +; variables. +; - magic_quotes_gpc = Off [Performance] +; Input data is no longer escaped with slashes so that it can be sent into +; SQL databases without further manipulation. Instead, you should use the +; database vendor specific escape string function on each input element you +; wish to send to a database. +; - variables_order = "GPCS" [Performance] +; The environment variables are not hashed into the $_ENV. To access +; environment variables, you can use getenv() instead. +; - error_reporting = E_ALL [Code Cleanliness, Security(?)] +; By default, PHP suppresses errors of type E_NOTICE. These error messages +; are emitted for non-critical errors, but that could be a symptom of a bigger +; problem. Most notably, this will cause error messages about the use +; of uninitialized variables to be displayed. +; - allow_call_time_pass_reference = Off [Code cleanliness] +; It's not possible to decide to force a variable to be passed by reference +; when calling a function. The PHP 4 style to do this is by making the +; function require the relevant argument by reference. +; - short_open_tag = Off [Portability] +; Using short tags is discouraged when developing code meant for redistribution +; since short tags may not be supported on the target server. + +;;;;;;;;;;;;;;;;;;;; +; Language Options ; +;;;;;;;;;;;;;;;;;;;; + +; Enable the PHP scripting language engine under Apache. +engine = On + +; Enable compatibility mode with Zend Engine 1 (PHP 4.x) +zend.ze1_compatibility_mode = Off + +; Allow the tags are recognized. +; NOTE: Using short tags should be avoided when developing applications or +; libraries that are meant for redistribution, or deployment on PHP +; servers which are not under your control, because short tags may not +; be supported on the target server. For portable, redistributable code, +; be sure not to use short tags. +short_open_tag = Off + +; Allow ASP-style <% %> tags. +asp_tags = Off + +; The number of significant digits displayed in floating point numbers. +precision = 14 + +; Enforce year 2000 compliance (will cause problems with non-compliant browsers) +y2k_compliance = On + +; Output buffering allows you to send header lines (including cookies) even +; after you send body content, at the price of slowing PHP's output layer a +; bit. You can enable output buffering during runtime by calling the output +; buffering functions. You can also enable output buffering for all files by +; setting this directive to On. If you wish to limit the size of the buffer +; to a certain size - you can use a maximum number of bytes instead of 'On', as +; a value for this directive (e.g., output_buffering=4096). +output_buffering = 4096 + +; You can redirect all of the output of your scripts to a function. For +; example, if you set output_handler to "mb_output_handler", character +; encoding will be transparently converted to the specified encoding. +; Setting any output handler automatically turns on output buffering. +; Note: People who wrote portable scripts should not depend on this ini +; directive. Instead, explicitly set the output handler using ob_start(). +; Using this ini directive may cause problems unless you know what script +; is doing. +; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" +; and you cannot use both "ob_gzhandler" and "zlib.output_compression". +; Note: output_handler must be empty if this is set 'On' !!!! +; Instead you must use zlib.output_handler. +;output_handler = + +; Transparent output compression using the zlib library +; Valid values for this option are 'off', 'on', or a specific buffer size +; to be used for compression (default is 4KB) +; Note: Resulting chunk size may vary due to nature of compression. PHP +; outputs chunks that are few hundreds bytes each as a result of +; compression. If you prefer a larger chunk size for better +; performance, enable output_buffering in addition. +; Note: You need to use zlib.output_handler instead of the standard +; output_handler, or otherwise the output will be corrupted. +zlib.output_compression = Off +;zlib.output_compression_level = -1 + +; You cannot specify additional output handlers if zlib.output_compression +; is activated here. This setting does the same as output_handler but in +; a different order. +;zlib.output_handler = + +; Implicit flush tells PHP to tell the output layer to flush itself +; automatically after every output block. This is equivalent to calling the +; PHP function flush() after each and every call to print() or echo() and each +; and every HTML block. Turning this option on has serious performance +; implications and is generally recommended for debugging purposes only. +implicit_flush = Off + +; The unserialize callback function will be called (with the undefined class' +; name as parameter), if the unserializer finds an undefined class +; which should be instantiated. +; A warning appears if the specified function is not defined, or if the +; function doesn't include/implement the missing class. +; So only set this entry, if you really want to implement such a +; callback-function. +unserialize_callback_func= + +; When floats & doubles are serialized store serialize_precision significant +; digits after the floating point. The default value ensures that when floats +; are decoded with unserialize, the data will remain the same. +serialize_precision = 100 + +; Whether to enable the ability to force arguments to be passed by reference +; at function call time. This method is deprecated and is likely to be +; unsupported in future versions of PHP/Zend. The encouraged method of +; specifying which arguments should be passed by reference is in the function +; declaration. You're encouraged to try and turn this option Off and make +; sure your scripts work properly with it in order to ensure they will work +; with future versions of the language (you will receive a warning each time +; you use this feature, and the argument will be passed by value instead of by +; reference). +allow_call_time_pass_reference = Off + +; +; Safe Mode +; +safe_mode = Off + +; By default, Safe Mode does a UID compare check when +; opening files. If you want to relax this to a GID compare, +; then turn on safe_mode_gid. +safe_mode_gid = Off + +; When safe_mode is on, UID/GID checks are bypassed when +; including files from this directory and its subdirectories. +; (directory must also be in include_path or full path must +; be used when including) +safe_mode_include_dir = + +; When safe_mode is on, only executables located in the safe_mode_exec_dir +; will be allowed to be executed via the exec family of functions. +safe_mode_exec_dir = + +; Setting certain environment variables may be a potential security breach. +; This directive contains a comma-delimited list of prefixes. In Safe Mode, +; the user may only alter environment variables whose names begin with the +; prefixes supplied here. By default, users will only be able to set +; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). +; +; Note: If this directive is empty, PHP will let the user modify ANY +; environment variable! +safe_mode_allowed_env_vars = PHP_ + +; This directive contains a comma-delimited list of environment variables that +; the end user won't be able to change using putenv(). These variables will be +; protected even if safe_mode_allowed_env_vars is set to allow to change them. +safe_mode_protected_env_vars = LD_LIBRARY_PATH + +; open_basedir, if set, limits all file operations to the defined directory +; and below. This directive makes most sense if used in a per-directory +; or per-virtualhost web server configuration file. This directive is +; *NOT* affected by whether Safe Mode is turned On or Off. +;open_basedir = + +; This directive allows you to disable certain functions for security reasons. +; It receives a comma-delimited list of function names. This directive is +; *NOT* affected by whether Safe Mode is turned On or Off. +disable_functions = + +; This directive allows you to disable certain classes for security reasons. +; It receives a comma-delimited list of class names. This directive is +; *NOT* affected by whether Safe Mode is turned On or Off. +disable_classes = + +; Colors for Syntax Highlighting mode. Anything that's acceptable in +; would work. +;highlight.string = #DD0000 +;highlight.comment = #FF9900 +;highlight.keyword = #007700 +;highlight.bg = #FFFFFF +;highlight.default = #0000BB +;highlight.html = #000000 + +; If enabled, the request will be allowed to complete even if the user aborts +; the request. Consider enabling it if executing long request, which may end up +; being interrupted by the user or a browser timing out. +; ignore_user_abort = On + +; Determines the size of the realpath cache to be used by PHP. This value should +; be increased on systems where PHP opens many files to reflect the quantity of +; the file operations performed. +; realpath_cache_size=16k + +; Duration of time, in seconds for which to cache realpath information for a given +; file or directory. For systems with rarely changing files, consider increasing this +; value. +; realpath_cache_ttl=120 + +; +; Misc +; +; Decides whether PHP may expose the fact that it is installed on the server +; (e.g. by adding its signature to the Web server header). It is no security +; threat in any way, but it makes it possible to determine whether you use PHP +; on your server or not. +expose_php = On + + +;;;;;;;;;;;;;;;;;;; +; Resource Limits ; +;;;;;;;;;;;;;;;;;;; + +max_execution_time = 30 ; Maximum execution time of each script, in seconds +max_input_time = 60 ; Maximum amount of time each script may spend parsing request data +;max_input_nesting_level = 64 ; Maximum input variable nesting level +memory_limit = 128M ; Maximum amount of memory a script may consume (128MB) + + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Error handling and logging ; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; error_reporting is a bit-field. Or each number up to get desired error +; reporting level +; E_ALL - All errors and warnings (doesn't include E_STRICT) +; E_ERROR - fatal run-time errors +; E_RECOVERABLE_ERROR - almost fatal run-time errors +; E_WARNING - run-time warnings (non-fatal errors) +; E_PARSE - compile-time parse errors +; E_NOTICE - run-time notices (these are warnings which often result +; from a bug in your code, but it's possible that it was +; intentional (e.g., using an uninitialized variable and +; relying on the fact it's automatically initialized to an +; empty string) +; E_STRICT - run-time notices, enable to have PHP suggest changes +; to your code which will ensure the best interoperability +; and forward compatibility of your code +; E_CORE_ERROR - fatal errors that occur during PHP's initial startup +; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's +; initial startup +; E_COMPILE_ERROR - fatal compile-time errors +; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) +; E_USER_ERROR - user-generated error message +; E_USER_WARNING - user-generated warning message +; E_USER_NOTICE - user-generated notice message +; +; Examples: +; +; - Show all errors, except for notices and coding standards warnings +; +;error_reporting = E_ALL & ~E_NOTICE +; +; - Show all errors, except for notices +; +;error_reporting = E_ALL & ~E_NOTICE | E_STRICT +; +; - Show only errors +; +;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR +; +; - Show all errors, except coding standards warnings +; +error_reporting = E_ALL + +; Print out errors (as a part of the output). For production web sites, +; you're strongly encouraged to turn this feature off, and use error logging +; instead (see below). Keeping display_errors enabled on a production web site +; may reveal security information to end users, such as file paths on your Web +; server, your database schema or other information. +; +; possible values for display_errors: +; +; Off - Do not display any errors +; stderr - Display errors to STDERR (affects only CGI/CLI binaries!) +; On or stdout - Display errors to STDOUT (default) +; +; To output errors to STDERR with CGI/CLI: +;display_errors = "stderr" +; +; Default +; +display_errors = Off + +; Even when display_errors is on, errors that occur during PHP's startup +; sequence are not displayed. It's strongly recommended to keep +; display_startup_errors off, except for when debugging. +display_startup_errors = Off + +; Log errors into a log file (server-specific log, stderr, or error_log (below)) +; As stated above, you're strongly advised to use error logging in place of +; error displaying on production web sites. +log_errors = On + +; Set maximum length of log_errors. In error_log information about the source is +; added. The default is 1024 and 0 allows to not apply any maximum length at all. +log_errors_max_len = 1024 + +; Do not log repeated messages. Repeated errors must occur in same file on same +; line unless ignore_repeated_source is set true. +ignore_repeated_errors = Off + +; Ignore source of message when ignoring repeated messages. When this setting +; is On you will not log errors with repeated messages from different files or +; source lines. +ignore_repeated_source = Off + +; If this parameter is set to Off, then memory leaks will not be shown (on +; stdout or in the log). This has only effect in a debug compile, and if +; error reporting includes E_WARNING in the allowed list +report_memleaks = On + +;report_zend_debug = 0 + +; Store the last error/warning message in $php_errormsg (boolean). +track_errors = Off + +; Turn off normal error reporting and emit XML-RPC error XML +;xmlrpc_errors = 0 +; An XML-RPC faultCode +;xmlrpc_error_number = 0 + +; Disable the inclusion of HTML tags in error messages. +; Note: Never use this feature for production boxes. +;html_errors = Off + +; If html_errors is set On PHP produces clickable error messages that direct +; to a page describing the error or function causing the error in detail. +; You can download a copy of the PHP manual from http://www.php.net/docs.php +; and change docref_root to the base URL of your local copy including the +; leading '/'. You must also specify the file extension being used including +; the dot. +; Note: Never use this feature for production boxes. +;docref_root = "/phpmanual/" +;docref_ext = .html + +; String to output before an error message. +;error_prepend_string = "" + +; String to output after an error message. +;error_append_string = "" + +; Log errors to specified file. +;error_log = filename + +; Log errors to syslog (Event Log on NT, not valid in Windows 95). +;error_log = syslog + + +;;;;;;;;;;;;;;;;; +; Data Handling ; +;;;;;;;;;;;;;;;;; +; +; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 + +; The separator used in PHP generated URLs to separate arguments. +; Default is "&". +;arg_separator.output = "&" + +; List of separator(s) used by PHP to parse input URLs into variables. +; Default is "&". +; NOTE: Every character in this directive is considered as separator! +;arg_separator.input = ";&" + +; This directive describes the order in which PHP registers GET, POST, Cookie, +; Environment and Built-in variables (G, P, C, E & S respectively, often +; referred to as EGPCS or GPC). Registration is done from left to right, newer +; values override older values. +variables_order = "GPCS" + +; Whether or not to register the EGPCS variables as global variables. You may +; want to turn this off if you don't want to clutter your scripts' global scope +; with user data. This makes most sense when coupled with track_vars - in which +; case you can access all of the GPC variables through the $HTTP_*_VARS[], +; variables. +; +; You should do your best to write your scripts so that they do not require +; register_globals to be on; Using form variables as globals can easily lead +; to possible security problems, if the code is not very well thought of. +register_globals = Off + +; Whether or not to register the old-style input arrays, HTTP_GET_VARS +; and friends. If you're not using them, it's recommended to turn them off, +; for performance reasons. +register_long_arrays = Off + +; This directive tells PHP whether to declare the argv&argc variables (that +; would contain the GET information). If you don't use these variables, you +; should turn it off for increased performance. +register_argc_argv = Off + +; When enabled, the SERVER and ENV variables are created when they're first +; used (Just In Time) instead of when the script starts. If these variables +; are not used within a script, having this directive on will result in a +; performance gain. The PHP directives register_globals, register_long_arrays, +; and register_argc_argv must be disabled for this directive to have any affect. +auto_globals_jit = On + +; Maximum size of POST data that PHP will accept. +post_max_size = 8M + +; Magic quotes +; + +; Magic quotes for incoming GET/POST/Cookie data. +magic_quotes_gpc = Off + +; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. +magic_quotes_runtime = Off + +; Use Sybase-style magic quotes (escape ' with '' instead of \'). +magic_quotes_sybase = Off + +; Automatically add files before or after any PHP document. +auto_prepend_file = +auto_append_file = + +; As of 4.0b4, PHP always outputs a character encoding by default in +; the Content-type: header. To disable sending of the charset, simply +; set it to be empty. +; +; PHP's built-in default is text/html +default_mimetype = "text/html" +;default_charset = "iso-8859-1" + +; Always populate the $HTTP_RAW_POST_DATA variable. +;always_populate_raw_post_data = On + + +;;;;;;;;;;;;;;;;;;;;;;;;; +; Paths and Directories ; +;;;;;;;;;;;;;;;;;;;;;;;;; + +; UNIX: "/path1:/path2" +;include_path = ".:/php/includes" +; +; Windows: "\path1;\path2" +;include_path = ".;c:\php\includes" + +; The root of the PHP pages, used only if nonempty. +; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root +; if you are running php as a CGI under any web server (other than IIS) +; see documentation for security issues. The alternate is to use the +; cgi.force_redirect configuration below +doc_root = + +; The directory under which PHP opens the script using /~username used only +; if nonempty. +user_dir = + +; Directory in which the loadable extensions (modules) reside. +extension_dir = "./" + +; Whether or not to enable the dl() function. The dl() function does NOT work +; properly in multithreaded servers, such as IIS or Zeus, and is automatically +; disabled on them. +enable_dl = On + +; cgi.force_redirect is necessary to provide security running PHP as a CGI under +; most web servers. Left undefined, PHP turns this on by default. You can +; turn it off here AT YOUR OWN RISK +; **You CAN safely turn this off for IIS, in fact, you MUST.** +; cgi.force_redirect = 1 + +; if cgi.nph is enabled it will force cgi to always sent Status: 200 with +; every request. +; cgi.nph = 1 + +; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape +; (iPlanet) web servers, you MAY need to set an environment variable name that PHP +; will look for to know it is OK to continue execution. Setting this variable MAY +; cause security issues, KNOW WHAT YOU ARE DOING FIRST. +; cgi.redirect_status_env = ; + +; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's +; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok +; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting +; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting +; of zero causes PHP to behave as before. Default is 1. You should fix your scripts +; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. + cgi.fix_pathinfo=1 + +; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate +; security tokens of the calling client. This allows IIS to define the +; security context that the request runs under. mod_fastcgi under Apache +; does not currently support this feature (03/17/2002) +; Set to 1 if running under IIS. Default is zero. +; fastcgi.impersonate = 1; + +; Disable logging through FastCGI connection +; fastcgi.logging = 0 + +; cgi.rfc2616_headers configuration option tells PHP what type of headers to +; use when sending HTTP response code. If it's set 0 PHP sends Status: header that +; is supported by Apache. When this option is set to 1 PHP will send +; RFC2616 compliant header. +; Default is zero. +;cgi.rfc2616_headers = 0 + + +;;;;;;;;;;;;;;;; +; File Uploads ; +;;;;;;;;;;;;;;;; + +; Whether to allow HTTP file uploads. +file_uploads = On + +; Temporary directory for HTTP uploaded files (will use system default if not +; specified). +;upload_tmp_dir = + +; Maximum allowed size for uploaded files. +upload_max_filesize = 2M + + +; Maximum number of files that can be uploaded via a single request +max_file_uploads = 20 + +;;;;;;;;;;;;;;;;;; +; Fopen wrappers ; +;;;;;;;;;;;;;;;;;; + +; Whether to allow the treatment of URLs (like http:// or ftp://) as files. +allow_url_fopen = On + +; Whether to allow include/require to open URLs (like http:// or ftp://) as files. +allow_url_include = Off + +; Define the anonymous ftp password (your email address) +;from="john@doe.com" + +; Define the User-Agent string +; user_agent="PHP" + +; Default timeout for socket based streams (seconds) +default_socket_timeout = 60 + +; If your scripts have to deal with files from Macintosh systems, +; or you are running on a Mac and need to deal with files from +; unix or win32 systems, setting this flag will cause PHP to +; automatically detect the EOL character in those files so that +; fgets() and file() will work regardless of the source of the file. +; auto_detect_line_endings = Off + + +;;;;;;;;;;;;;;;;;;;;;; +; Dynamic Extensions ; +;;;;;;;;;;;;;;;;;;;;;; +; +; If you wish to have an extension loaded automatically, use the following +; syntax: +; +; extension=modulename.extension +; +; For example, on Windows: +; +; extension=msql.dll +; +; ... or under UNIX: +; +; extension=msql.so +; +; Note that it should be the name of the module only; no directory information +; needs to go here. Specify the location of the extension with the +; extension_dir directive above. + + +; Windows Extensions +; Note that ODBC support is built in, so no dll is needed for it. +; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) +; extension folders as well as the separate PECL DLL download (PHP 5). +; Be sure to appropriately set the extension_dir directive. + +;extension=php_bz2.dll +;extension=php_curl.dll +;extension=php_dba.dll +;extension=php_dbase.dll +;extension=php_exif.dll +;extension=php_fdf.dll +;extension=php_gd2.dll +;extension=php_gettext.dll +;extension=php_gmp.dll +;extension=php_ifx.dll +;extension=php_imap.dll +;extension=php_interbase.dll +;extension=php_ldap.dll +;extension=php_mbstring.dll +;extension=php_mcrypt.dll +;extension=php_mhash.dll +;extension=php_mime_magic.dll +;extension=php_ming.dll +;extension=php_msql.dll +;extension=php_mssql.dll +;extension=php_mysql.dll +;extension=php_mysqli.dll +;extension=php_oci8.dll +;extension=php_openssl.dll +;extension=php_pdo.dll +;extension=php_pdo_firebird.dll +;extension=php_pdo_mssql.dll +;extension=php_pdo_mysql.dll +;extension=php_pdo_oci.dll +;extension=php_pdo_oci8.dll +;extension=php_pdo_odbc.dll +;extension=php_pdo_pgsql.dll +;extension=php_pdo_sqlite.dll +;extension=php_pgsql.dll +;extension=php_pspell.dll +;extension=php_shmop.dll +;extension=php_snmp.dll +;extension=php_soap.dll +;extension=php_sockets.dll +;extension=php_sqlite.dll +;extension=php_sybase_ct.dll +;extension=php_tidy.dll +;extension=php_xmlrpc.dll +;extension=php_xsl.dll +;extension=php_zip.dll + +;;;;;;;;;;;;;;;;;;; +; Module Settings ; +;;;;;;;;;;;;;;;;;;; + +[Date] +; Defines the default timezone used by the date functions +;date.timezone = + +;date.default_latitude = 31.7667 +;date.default_longitude = 35.2333 + +;date.sunrise_zenith = 90.583333 +;date.sunset_zenith = 90.583333 + +[filter] +;filter.default = unsafe_raw +;filter.default_flags = + +[iconv] +;iconv.input_encoding = ISO-8859-1 +;iconv.internal_encoding = ISO-8859-1 +;iconv.output_encoding = ISO-8859-1 + +[sqlite] +;sqlite.assoc_case = 0 + +[Pcre] +;PCRE library backtracking limit. +;pcre.backtrack_limit=100000 + +;PCRE library recursion limit. +;Please note that if you set this value to a high number you may consume all +;the available process stack and eventually crash PHP (due to reaching the +;stack size limit imposed by the Operating System). +;pcre.recursion_limit=100000 + +[Syslog] +; Whether or not to define the various syslog variables (e.g. $LOG_PID, +; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In +; runtime, you can define these variables by calling define_syslog_variables(). +define_syslog_variables = Off + +[mail function] +; For Win32 only. +SMTP = localhost +smtp_port = 25 + +; For Win32 only. +;sendmail_from = me@example.com + +; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). +;sendmail_path = + +; Force the addition of the specified parameters to be passed as extra parameters +; to the sendmail binary. These parameters will always replace the value of +; the 5th parameter to mail(), even in safe mode. +;mail.force_extra_parameters = + +[SQL] +sql.safe_mode = Off + +[ODBC] +;odbc.default_db = Not yet implemented +;odbc.default_user = Not yet implemented +;odbc.default_pw = Not yet implemented + +; Allow or prevent persistent links. +odbc.allow_persistent = On + +; Check that a connection is still valid before reuse. +odbc.check_persistent = On + +; Maximum number of persistent links. -1 means no limit. +odbc.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +odbc.max_links = -1 + +; Handling of LONG fields. Returns number of bytes to variables. 0 means +; passthru. +odbc.defaultlrl = 4096 + +; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. +; See the documentation on odbc_binmode and odbc_longreadlen for an explanation +; of uodbc.defaultlrl and uodbc.defaultbinmode +odbc.defaultbinmode = 1 + +[MySQL] +; Allow or prevent persistent links. +mysql.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +mysql.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +mysql.max_links = -1 + +; Default port number for mysql_connect(). If unset, mysql_connect() will use +; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the +; compile-time value defined MYSQL_PORT (in that order). Win32 will only look +; at MYSQL_PORT. +mysql.default_port = + +; Default socket name for local MySQL connects. If empty, uses the built-in +; MySQL defaults. +mysql.default_socket = + +; Default host for mysql_connect() (doesn't apply in safe mode). +mysql.default_host = + +; Default user for mysql_connect() (doesn't apply in safe mode). +mysql.default_user = + +; Default password for mysql_connect() (doesn't apply in safe mode). +; Note that this is generally a *bad* idea to store passwords in this file. +; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") +; and reveal this password! And of course, any users with read access to this +; file will be able to reveal the password as well. +mysql.default_password = + +; Maximum time (in seconds) for connect timeout. -1 means no limit +mysql.connect_timeout = 60 + +; Trace mode. When trace_mode is active (=On), warnings for table/index scans and +; SQL-Errors will be displayed. +mysql.trace_mode = Off + +[MySQLi] + +; Maximum number of links. -1 means no limit. +mysqli.max_links = -1 + +; Default port number for mysqli_connect(). If unset, mysqli_connect() will use +; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the +; compile-time value defined MYSQL_PORT (in that order). Win32 will only look +; at MYSQL_PORT. +mysqli.default_port = 3306 + +; Default socket name for local MySQL connects. If empty, uses the built-in +; MySQL defaults. +mysqli.default_socket = + +; Default host for mysql_connect() (doesn't apply in safe mode). +mysqli.default_host = + +; Default user for mysql_connect() (doesn't apply in safe mode). +mysqli.default_user = + +; Default password for mysqli_connect() (doesn't apply in safe mode). +; Note that this is generally a *bad* idea to store passwords in this file. +; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") +; and reveal this password! And of course, any users with read access to this +; file will be able to reveal the password as well. +mysqli.default_pw = + +; Allow or prevent reconnect +mysqli.reconnect = Off + +[mSQL] +; Allow or prevent persistent links. +msql.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +msql.max_persistent = -1 + +; Maximum number of links (persistent+non persistent). -1 means no limit. +msql.max_links = -1 + +[OCI8] +; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA) +;oci8.privileged_connect = Off + +; Connection: The maximum number of persistent OCI8 connections per +; process. Using -1 means no limit. +;oci8.max_persistent = -1 + +; Connection: The maximum number of seconds a process is allowed to +; maintain an idle persistent connection. Using -1 means idle +; persistent connections will be maintained forever. +;oci8.persistent_timeout = -1 + +; Connection: The number of seconds that must pass before issuing a +; ping during oci_pconnect() to check the connection validity. When +; set to 0, each oci_pconnect() will cause a ping. Using -1 disables +; pings completely. +;oci8.ping_interval = 60 + +; Tuning: This option enables statement caching, and specifies how +; many statements to cache. Using 0 disables statement caching. +;oci8.statement_cache_size = 20 + +; Tuning: Enables statement prefetching and sets the default number of +; rows that will be fetched automatically after statement execution. +;oci8.default_prefetch = 10 + +; Compatibility. Using On means oci_close() will not close +; oci_connect() and oci_new_connect() connections. +;oci8.old_oci_close_semantics = Off + +[PostgresSQL] +; Allow or prevent persistent links. +pgsql.allow_persistent = On + +; Detect broken persistent links always with pg_pconnect(). +; Auto reset feature requires a little overheads. +pgsql.auto_reset_persistent = Off + +; Maximum number of persistent links. -1 means no limit. +pgsql.max_persistent = -1 + +; Maximum number of links (persistent+non persistent). -1 means no limit. +pgsql.max_links = -1 + +; Ignore PostgreSQL backends Notice message or not. +; Notice message logging require a little overheads. +pgsql.ignore_notice = 0 + +; Log PostgreSQL backends Notice message or not. +; Unless pgsql.ignore_notice=0, module cannot log notice message. +pgsql.log_notice = 0 + +[Sybase] +; Allow or prevent persistent links. +sybase.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +sybase.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +sybase.max_links = -1 + +;sybase.interface_file = "/usr/sybase/interfaces" + +; Minimum error severity to display. +sybase.min_error_severity = 10 + +; Minimum message severity to display. +sybase.min_message_severity = 10 + +; Compatibility mode with old versions of PHP 3.0. +; If on, this will cause PHP to automatically assign types to results according +; to their Sybase type, instead of treating them all as strings. This +; compatibility mode will probably not stay around forever, so try applying +; whatever necessary changes to your code, and turn it off. +sybase.compatability_mode = Off + +[Sybase-CT] +; Allow or prevent persistent links. +sybct.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +sybct.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +sybct.max_links = -1 + +; Minimum server message severity to display. +sybct.min_server_severity = 10 + +; Minimum client message severity to display. +sybct.min_client_severity = 10 + +[bcmath] +; Number of decimal digits for all bcmath functions. +bcmath.scale = 0 + +[browscap] +;browscap = extra/browscap.ini + +[Informix] +; Default host for ifx_connect() (doesn't apply in safe mode). +ifx.default_host = + +; Default user for ifx_connect() (doesn't apply in safe mode). +ifx.default_user = + +; Default password for ifx_connect() (doesn't apply in safe mode). +ifx.default_password = + +; Allow or prevent persistent links. +ifx.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +ifx.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +ifx.max_links = -1 + +; If on, select statements return the contents of a text blob instead of its id. +ifx.textasvarchar = 0 + +; If on, select statements return the contents of a byte blob instead of its id. +ifx.byteasvarchar = 0 + +; Trailing blanks are stripped from fixed-length char columns. May help the +; life of Informix SE users. +ifx.charasvarchar = 0 + +; If on, the contents of text and byte blobs are dumped to a file instead of +; keeping them in memory. +ifx.blobinfile = 0 + +; NULL's are returned as empty strings, unless this is set to 1. In that case, +; NULL's are returned as string 'NULL'. +ifx.nullformat = 0 + +[Session] +; Handler used to store/retrieve data. +session.save_handler = files + +; Argument passed to save_handler. In the case of files, this is the path +; where data files are stored. Note: Windows users have to change this +; variable in order to use PHP's session functions. +; +; As of PHP 4.0.1, you can define the path as: +; +; session.save_path = "N;/path" +; +; where N is an integer. Instead of storing all the session files in +; /path, what this will do is use subdirectories N-levels deep, and +; store the session data in those directories. This is useful if you +; or your OS have problems with lots of files in one directory, and is +; a more efficient layout for servers that handle lots of sessions. +; +; NOTE 1: PHP will not create this directory structure automatically. +; You can use the script in the ext/session dir for that purpose. +; NOTE 2: See the section on garbage collection below if you choose to +; use subdirectories for session storage +; +; The file storage module creates files using mode 600 by default. +; You can change that by using +; +; session.save_path = "N;MODE;/path" +; +; where MODE is the octal representation of the mode. Note that this +; does not overwrite the process's umask. +;session.save_path = "/tmp" + +; Whether to use cookies. +session.use_cookies = 1 + +;session.cookie_secure = + +; This option enables administrators to make their users invulnerable to +; attacks which involve passing session ids in URLs; defaults to 0. +; session.use_only_cookies = 1 + +; Name of the session (used as cookie name). +session.name = PHPSESSID + +; Initialize session on request startup. +session.auto_start = 0 + +; Lifetime in seconds of cookie or, if 0, until browser is restarted. +session.cookie_lifetime = 0 + +; The path for which the cookie is valid. +session.cookie_path = / + +; The domain for which the cookie is valid. +session.cookie_domain = + +; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. +session.cookie_httponly = + +; Handler used to serialize data. php is the standard serializer of PHP. +session.serialize_handler = php + +; Define the probability that the 'garbage collection' process is started +; on every session initialization. +; The probability is calculated by using gc_probability/gc_divisor, +; e.g. 1/100 means there is a 1% chance that the GC process starts +; on each request. + +session.gc_probability = 1 +session.gc_divisor = 1000 + +; After this number of seconds, stored data will be seen as 'garbage' and +; cleaned up by the garbage collection process. +session.gc_maxlifetime = 1440 + +; NOTE: If you are using the subdirectory option for storing session files +; (see session.save_path above), then garbage collection does *not* +; happen automatically. You will need to do your own garbage +; collection through a shell script, cron entry, or some other method. +; For example, the following script would is the equivalent of +; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): +; cd /path/to/sessions; find -cmin +24 | xargs rm + +; PHP 4.2 and less have an undocumented feature/bug that allows you to +; to initialize a session variable in the global scope, albeit register_globals +; is disabled. PHP 4.3 and later will warn you, if this feature is used. +; You can disable the feature and the warning separately. At this time, +; the warning is only displayed, if bug_compat_42 is enabled. + +session.bug_compat_42 = 0 +session.bug_compat_warn = 1 + +; Check HTTP Referer to invalidate externally stored URLs containing ids. +; HTTP_REFERER has to contain this substring for the session to be +; considered as valid. +session.referer_check = + +; How many bytes to read from the file. +session.entropy_length = 0 + +; Specified here to create the session id. +session.entropy_file = + +;session.entropy_length = 16 + +;session.entropy_file = /dev/urandom + +; Set to {nocache,private,public,} to determine HTTP caching aspects +; or leave this empty to avoid sending anti-caching headers. +session.cache_limiter = nocache + +; Document expires after n minutes. +session.cache_expire = 180 + +; trans sid support is disabled by default. +; Use of trans sid may risk your users security. +; Use this option with caution. +; - User may send URL contains active session ID +; to other person via. email/irc/etc. +; - URL that contains active session ID may be stored +; in publically accessible computer. +; - User may access your site with the same session ID +; always using URL stored in browser's history or bookmarks. +session.use_trans_sid = 0 + +; Select a hash function +; 0: MD5 (128 bits) +; 1: SHA-1 (160 bits) +session.hash_function = 0 + +; Define how many bits are stored in each character when converting +; the binary hash data to something readable. +; +; 4 bits: 0-9, a-f +; 5 bits: 0-9, a-v +; 6 bits: 0-9, a-z, A-Z, "-", "," +session.hash_bits_per_character = 5 + +; The URL rewriter will look for URLs in a defined set of HTML tags. +; form/fieldset are special; if you include them here, the rewriter will +; add a hidden field with the info which is otherwise appended +; to URLs. If you want XHTML conformity, remove the form entry. +; Note that all valid entries require a "=", even if no value follows. +url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" + +[MSSQL] +; Allow or prevent persistent links. +mssql.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +mssql.max_persistent = -1 + +; Maximum number of links (persistent+non persistent). -1 means no limit. +mssql.max_links = -1 + +; Minimum error severity to display. +mssql.min_error_severity = 10 + +; Minimum message severity to display. +mssql.min_message_severity = 10 + +; Compatibility mode with old versions of PHP 3.0. +mssql.compatability_mode = Off + +; Connect timeout +;mssql.connect_timeout = 5 + +; Query timeout +;mssql.timeout = 60 + +; Valid range 0 - 2147483647. Default = 4096. +;mssql.textlimit = 4096 + +; Valid range 0 - 2147483647. Default = 4096. +;mssql.textsize = 4096 + +; Limits the number of records in each batch. 0 = all records in one batch. +;mssql.batchsize = 0 + +; Specify how datetime and datetim4 columns are returned +; On => Returns data converted to SQL server settings +; Off => Returns values as YYYY-MM-DD hh:mm:ss +;mssql.datetimeconvert = On + +; Use NT authentication when connecting to the server +mssql.secure_connection = Off + +; Specify max number of processes. -1 = library default +; msdlib defaults to 25 +; FreeTDS defaults to 4096 +;mssql.max_procs = -1 + +; Specify client character set. +; If empty or not set the client charset from freetds.comf is used +; This is only used when compiled with FreeTDS +;mssql.charset = "ISO-8859-1" + +[Assertion] +; Assert(expr); active by default. +;assert.active = On + +; Issue a PHP warning for each failed assertion. +;assert.warning = On + +; Don't bail out by default. +;assert.bail = Off + +; User-function to be called if an assertion fails. +;assert.callback = 0 + +; Eval the expression with current error_reporting(). Set to true if you want +; error_reporting(0) around the eval(). +;assert.quiet_eval = 0 + +[COM] +; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs +;com.typelib_file = +; allow Distributed-COM calls +;com.allow_dcom = true +; autoregister constants of a components typlib on com_load() +;com.autoregister_typelib = true +; register constants casesensitive +;com.autoregister_casesensitive = false +; show warnings on duplicate constant registrations +;com.autoregister_verbose = true + +[mbstring] +; language for internal character representation. +;mbstring.language = Japanese + +; internal/script encoding. +; Some encoding cannot work as internal encoding. +; (e.g. SJIS, BIG5, ISO-2022-*) +;mbstring.internal_encoding = EUC-JP + +; http input encoding. +;mbstring.http_input = auto + +; http output encoding. mb_output_handler must be +; registered as output buffer to function +;mbstring.http_output = SJIS + +; enable automatic encoding translation according to +; mbstring.internal_encoding setting. Input chars are +; converted to internal encoding by setting this to On. +; Note: Do _not_ use automatic encoding translation for +; portable libs/applications. +;mbstring.encoding_translation = Off + +; automatic encoding detection order. +; auto means +;mbstring.detect_order = auto + +; substitute_character used when character cannot be converted +; one from another +;mbstring.substitute_character = none; + +; overload(replace) single byte functions by mbstring functions. +; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), +; etc. Possible values are 0,1,2,4 or combination of them. +; For example, 7 for overload everything. +; 0: No overload +; 1: Overload mail() function +; 2: Overload str*() functions +; 4: Overload ereg*() functions +;mbstring.func_overload = 0 + +; enable strict encoding detection. +;mbstring.strict_detection = Off + +[FrontBase] +;fbsql.allow_persistent = On +;fbsql.autocommit = On +;fbsql.show_timestamp_decimals = Off +;fbsql.default_database = +;fbsql.default_database_password = +;fbsql.default_host = +;fbsql.default_password = +;fbsql.default_user = "_SYSTEM" +;fbsql.generate_warnings = Off +;fbsql.max_connections = 128 +;fbsql.max_links = 128 +;fbsql.max_persistent = -1 +;fbsql.max_results = 128 + +[gd] +; Tell the jpeg decode to libjpeg warnings and try to create +; a gd image. The warning will then be displayed as notices +; disabled by default +;gd.jpeg_ignore_warning = 0 + +[exif] +; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. +; With mbstring support this will automatically be converted into the encoding +; given by corresponding encode setting. When empty mbstring.internal_encoding +; is used. For the decode settings you can distinguish between motorola and +; intel byte order. A decode setting cannot be empty. +;exif.encode_unicode = ISO-8859-15 +;exif.decode_unicode_motorola = UCS-2BE +;exif.decode_unicode_intel = UCS-2LE +;exif.encode_jis = +;exif.decode_jis_motorola = JIS +;exif.decode_jis_intel = JIS + +[Tidy] +; The path to a default tidy configuration file to use when using tidy +;tidy.default_config = /usr/local/lib/php/default.tcfg + +; Should tidy clean and repair output automatically? +; WARNING: Do not use this option if you are generating non-html content +; such as dynamic images +tidy.clean_output = Off + +zlib.output_compression = On + +[soap] +; Enables or disables WSDL caching feature. +soap.wsdl_cache_enabled=1 +; Sets the directory name where SOAP extension will put cache files. +soap.wsdl_cache_dir="/tmp" +; (time to live) Sets the number of second while cached file will be used +; instead of original one. +soap.wsdl_cache_ttl=86400 + +; Local Variables: +; tab-width: 4 +; End: diff --git a/recipes-ti/matrix/matrix-gui_2.0.bb b/recipes-ti/matrix/matrix-gui_2.0.bb index 60b1a040..a0965d57 100644 --- a/recipes-ti/matrix/matrix-gui_2.0.bb +++ b/recipes-ti/matrix/matrix-gui_2.0.bb @@ -6,12 +6,12 @@ LIC_FILES_CHKSUM = "file://scripts/jquery-1.6.2.min.js;md5=a1a8cb16a060f6280a767 SECTION = "multimedia" -PR = "r2" +PR = "r3" inherit allarch BRANCH ?= "master" -SRCREV = "9f5d27fec216f223c43b48fa146edf4a4bb7aa24" +SRCREV = "8e2bd5ffdded23bb662476fcd2490fa1526801f8" SRC_URI = "git://gitorious.org/matrix-gui-v2/matrix-gui-v2.git;protocol=git;branch=${BRANCH} \ file://matrix-gui.service" @@ -22,10 +22,14 @@ S = "${WORKDIR}/git" do_install(){ install -d ${D}${MATRIX_BASE_DIR} - cp -rf ${S}/* ${D}${MATRIX_BASE_DIR} + install -d ${D}${MATRIX_WEB_DIR} + cp -rf ${S}/* ${D}${MATRIX_WEB_DIR} + + # Install our php.ini file + install -m 0644 ${WORKDIR}/php.ini ${D}${MATRIX_BASE_DIR}/ # Set the proper path in the init script - sed -i -e s=__MATRIX_BASE_DIR__=${MATRIX_BASE_DIR}=g ${WORKDIR}/matrix-gui.service + sed -i -e s=__MATRIX_WEB_DIR__=${MATRIX_WEB_DIR}=g ${WORKDIR}/matrix-gui.service install -d ${D}${base_libdir}/systemd/system/ install -m 0755 ${WORKDIR}/matrix-gui.service ${D}${base_libdir}/systemd/system/ @@ -35,5 +39,6 @@ do_install(){ ln -sf ../matrix-gui.service ${D}${base_libdir}/systemd/system/multi-user.target.wants/ } -RDEPENDS_${PN} += "nodejs" -FILES_${PN} += "${MATRIX_BASE_DIR}/* ${base_libdir}/systemd/system" +RDEPENDS_${PN} += "lighttpd lighttpd-module-cgi lighttpd-module-compress lighttpd-module-expire php php-cgi php-cli matrix-gui-browser" + +FILES_${PN} += "${MATRIX_BASE_DIR}/*" -- cgit v1.2.3-54-g00ecf