From 7c9f57083ec3e0e06d5ef0d390c12f1a79cc85fd Mon Sep 17 00:00:00 2001 From: Denys Dmytriyenko Date: Mon, 18 Mar 2013 18:06:38 -0400 Subject: u-boot-am37x: modify am37x specific version to use new namespace feature Signed-off-by: Denys Dmytriyenko --- ...3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch | 172 --------------------- .../0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch | 31 ---- ...e-add-usbethaddr-setting-to-enable-networ.patch | 40 ----- ...dded-function-calls-to-set-volts-speed-on.patch | 146 ----------------- ...17evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch | 73 --------- ...2-omap3evm-Make-the-board-start-at-800MHz.patch | 36 ----- ...gleboard-Load-uImage-from-VFAT-by-default.patch | 34 ---- ...03-beagleboard-Make-xM-rev-C-go-to-800MHz.patch | 34 ---- ...-Load-uImage-to-the-default-kernel-linux-.patch | 57 ------- ...3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch | 172 +++++++++++++++++++++ .../0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch | 31 ++++ ...e-add-usbethaddr-setting-to-enable-networ.patch | 40 +++++ ...dded-function-calls-to-set-volts-speed-on.patch | 146 +++++++++++++++++ ...17evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch | 73 +++++++++ ...2-omap3evm-Make-the-board-start-at-800MHz.patch | 36 +++++ ...gleboard-Load-uImage-from-VFAT-by-default.patch | 34 ++++ ...03-beagleboard-Make-xM-rev-C-go-to-800MHz.patch | 34 ++++ ...-Load-uImage-to-the-default-kernel-linux-.patch | 57 +++++++ recipes-bsp/u-boot/u-boot-am37x_2012.04.01.bb | 38 +++++ recipes-bsp/u-boot/u-boot_2012.04.01.bb | 50 ------ 20 files changed, 661 insertions(+), 673 deletions(-) delete mode 100644 recipes-bsp/u-boot/u-boot-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch delete mode 100644 recipes-bsp/u-boot/u-boot-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch delete mode 100644 recipes-bsp/u-boot/u-boot-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch delete mode 100644 recipes-bsp/u-boot/u-boot-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch delete mode 100644 recipes-bsp/u-boot/u-boot-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch delete mode 100644 recipes-bsp/u-boot/u-boot-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch delete mode 100644 recipes-bsp/u-boot/u-boot-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch delete mode 100644 recipes-bsp/u-boot/u-boot-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch delete mode 100644 recipes-bsp/u-boot/u-boot-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch create mode 100644 recipes-bsp/u-boot/u-boot-am37x_2012.04.01.bb delete mode 100644 recipes-bsp/u-boot/u-boot_2012.04.01.bb (limited to 'recipes-bsp/u-boot') diff --git a/recipes-bsp/u-boot/u-boot-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch b/recipes-bsp/u-boot/u-boot-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch deleted file mode 100644 index d36d8093..00000000 --- a/recipes-bsp/u-boot/u-boot-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch +++ /dev/null @@ -1,172 +0,0 @@ -From e0820ccc38315d88192c19e98ea9b59d3ec7d4c8 Mon Sep 17 00:00:00 2001 -From: Tom Rini -Date: Tue, 8 May 2012 07:29:31 +0000 -Subject: [PATCH] ARM: omap3: Set SPL stack size to 8KB, image to 54KB. - -With older toolchains it is possible to not fit entirely into the 45KB -that we had assigned to SPL. Adjust to allow for 8KB of stack (which -should be more than required) and 54KB of text/data. - -Cc: Vaibhav Hiremath -Cc: Nagendra T S -Cc: Thomas Weber -Cc: Ilya Yanok -Cc: Steve Sakoman -Cc: Stefano Babic -Signed-off-by: Tom Rini -Acked-by: Stefano Babic -Acked-by: Vaibhav Hiremath ---- - doc/SPL/README.omap3 | 4 ++-- - include/configs/am3517_crane.h | 2 +- - include/configs/am3517_evm.h | 2 +- - include/configs/devkit8000.h | 2 +- - include/configs/mcx.h | 2 +- - include/configs/omap3_beagle.h | 2 +- - include/configs/omap3_evm_common.h | 2 +- - include/configs/omap3_overo.h | 2 +- - include/configs/tam3517-common.h | 2 +- - include/configs/tricorder.h | 2 +- - 10 files changed, 11 insertions(+), 11 deletions(-) - -diff --git a/doc/SPL/README.omap3 b/doc/SPL/README.omap3 -index cc5d5c0..a543e65 100644 ---- a/doc/SPL/README.omap3 -+++ b/doc/SPL/README.omap3 -@@ -34,14 +34,14 @@ DDR1: 0x80000000 - 0xBFFFFFFF - - Option 1 (SPL only): - 0x40200800 - 0x4020BBFF: Area for SPL text, data and rodata --0x4020BC00 - 0x4020FFFC: Area for the SPL stack. -+0x4020E000 - 0x4020FFFC: Area for the SPL stack. - 0x80000000 - 0x8007FFFF: Area for the SPL BSS. - 0x80100000: CONFIG_SYS_TEXT_BASE of U-Boot - 0x80208000 - 0x80307FFF: malloc() pool available to SPL. - - Option 2 (SPL or X-Loader): - 0x40200800 - 0x4020BBFF: Area for SPL text, data and rodata --0x4020BC00 - 0x4020FFFC: Area for the SPL stack. -+0x4020E000 - 0x4020FFFC: Area for the SPL stack. - 0x80008000: CONFIG_SYS_TEXT_BASE of U-Boot - 0x87000000 - 0x8707FFFF: Area for the SPL BSS. - 0x87080000 - 0x870FFFFF: malloc() pool available to SPL. -diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h -index 71321f3..1233985 100644 ---- a/include/configs/am3517_crane.h -+++ b/include/configs/am3517_crane.h -@@ -325,7 +325,7 @@ - #define CONFIG_SPL - #define CONFIG_SPL_NAND_SIMPLE - #define CONFIG_SPL_TEXT_BASE 0x40200800 --#define CONFIG_SPL_MAX_SIZE (45 * 1024) -+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ - #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - - #define CONFIG_SPL_BSS_START_ADDR 0x80000000 -diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h -index bbd19de..ff8d1b0 100644 ---- a/include/configs/am3517_evm.h -+++ b/include/configs/am3517_evm.h -@@ -324,7 +324,7 @@ - #define CONFIG_SPL - #define CONFIG_SPL_NAND_SIMPLE - #define CONFIG_SPL_TEXT_BASE 0x40200800 --#define CONFIG_SPL_MAX_SIZE (45 * 1024) -+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ - #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - - #define CONFIG_SPL_BSS_START_ADDR 0x80000000 -diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h -index eb7c376..248a5b2 100644 ---- a/include/configs/devkit8000.h -+++ b/include/configs/devkit8000.h -@@ -324,7 +324,7 @@ - #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ - - #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ --#define CONFIG_SPL_MAX_SIZE 0xB400 /* 45 K */ -+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ - #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - - #define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ -diff --git a/include/configs/mcx.h b/include/configs/mcx.h -index e190e3e..f6a83a8 100644 ---- a/include/configs/mcx.h -+++ b/include/configs/mcx.h -@@ -325,7 +325,7 @@ - #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" - - #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ --#define CONFIG_SPL_MAX_SIZE (45 << 10) -+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ - #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - - /* move malloc and bss high to prevent clashing with the main image */ -diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h -index ddeb414..6bdc2c3 100644 ---- a/include/configs/omap3_beagle.h -+++ b/include/configs/omap3_beagle.h -@@ -399,7 +399,7 @@ - #define CONFIG_SPL - #define CONFIG_SPL_NAND_SIMPLE - #define CONFIG_SPL_TEXT_BASE 0x40200800 --#define CONFIG_SPL_MAX_SIZE (45 * 1024) -+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ - #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - - #define CONFIG_SPL_BSS_START_ADDR 0x80000000 -diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h -index 4910dda..47ebbef 100644 ---- a/include/configs/omap3_evm_common.h -+++ b/include/configs/omap3_evm_common.h -@@ -282,7 +282,7 @@ - /* Defines for SPL */ - #define CONFIG_SPL - #define CONFIG_SPL_TEXT_BASE 0x40200800 --#define CONFIG_SPL_MAX_SIZE (45 * 1024) /* 45 KB */ -+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ - #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - - #define CONFIG_SPL_BSS_START_ADDR 0x80000000 -diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h -index 64adc74..b0d144f 100644 ---- a/include/configs/omap3_overo.h -+++ b/include/configs/omap3_overo.h -@@ -303,7 +303,7 @@ - #define CONFIG_SPL - #define CONFIG_SPL_NAND_SIMPLE - #define CONFIG_SPL_TEXT_BASE 0x40200800 --#define CONFIG_SPL_MAX_SIZE (45 * 1024) -+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ - #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - - /* move malloc and bss high to prevent clashing with the main image */ -diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h -index 37eb87b..3fc2c44 100644 ---- a/include/configs/tam3517-common.h -+++ b/include/configs/tam3517-common.h -@@ -257,7 +257,7 @@ - #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" - - #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ --#define CONFIG_SPL_MAX_SIZE (45 << 10) /* 45 K */ -+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ - #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - - #define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 -diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h -index 801a24f..ab911aa 100644 ---- a/include/configs/tricorder.h -+++ b/include/configs/tricorder.h -@@ -293,7 +293,7 @@ - #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ - - #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ --#define CONFIG_SPL_MAX_SIZE 0xB400 /* 45 K */ -+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ - #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - - #define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ --- -1.7.0.4 - diff --git a/recipes-bsp/u-boot/u-boot-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch b/recipes-bsp/u-boot/u-boot-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch deleted file mode 100644 index 4fb89e1f..00000000 --- a/recipes-bsp/u-boot/u-boot-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 55161fca67023d6be30bdea495cc0fdbae316a64 Mon Sep 17 00:00:00 2001 -From: Tom Rini -Date: Wed, 9 Nov 2011 11:48:21 -0700 -Subject: [PATCH 1/4] OMAP3 Beagle: Set BOOTDELAY to 3 - -This is TI Sitara SDK specific (unified user experience, 3s delay). - -Upstream-Status: Pending - * This will be submitted upstream by Tom Rini - -Signed-off-by: Tom Rini ---- - include/configs/omap3_beagle.h | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - -diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h -index 58a29b8..ba73aa6 100644 ---- a/include/configs/omap3_beagle.h -+++ b/include/configs/omap3_beagle.h -@@ -213,7 +213,7 @@ - /* partition */ - - /* Environment information */ --#define CONFIG_BOOTDELAY 2 -+#define CONFIG_BOOTDELAY 3 - - #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ --- -1.7.0.4 - diff --git a/recipes-bsp/u-boot/u-boot-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch b/recipes-bsp/u-boot/u-boot-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch deleted file mode 100644 index 05df3222..00000000 --- a/recipes-bsp/u-boot/u-boot-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch +++ /dev/null @@ -1,40 +0,0 @@ -From c56786770eb0ccb95204cb72b961c44c65ff343b Mon Sep 17 00:00:00 2001 -From: Chase Maupin -Date: Thu, 17 May 2012 09:51:50 -0500 -Subject: [PATCH] omap3_beagle: add usbethaddr setting to enable networking - -* In order for the SMSC USB ethernet device to work the - usbethaddr setting must be set when the "usb start" command - is executed and the network device is discovered. -* Currently set this for de:ad:be:ef until we can start - generating random or semi-random MAC addresses. -* Based on work by Steve Kipisz and Joel Fernandez - -Upstream-Status: Not Upstreamable - * We cannot upstream this hard coded MAC address setting. - * User's should look at the following web page for information on - how to generate a MAC address, but this patch enables the out - of box experience for the SDK. - http://www.denx.de/wiki/view/DULG/WhereCanIGetAValidMACAddress - - -Signed-off-by: Chase Maupin ---- - include/configs/omap3_beagle.h | 1 + - 1 files changed, 1 insertions(+), 0 deletions(-) - -diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h -index ddeb414..58a29b8 100644 ---- a/include/configs/omap3_beagle.h -+++ b/include/configs/omap3_beagle.h -@@ -219,6 +219,7 @@ - "loadaddr=0x80200000\0" \ - "rdaddr=0x81000000\0" \ - "usbtty=cdc_acm\0" \ -+ "usbethaddr=de:ad:be:ef\0" \ - "bootfile=uImage.beagle\0" \ - "console=ttyO2,115200n8\0" \ - "mpurate=auto\0" \ --- -1.7.0.4 - diff --git a/recipes-bsp/u-boot/u-boot-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch b/recipes-bsp/u-boot/u-boot-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch deleted file mode 100644 index 4fc6e98a..00000000 --- a/recipes-bsp/u-boot/u-boot-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch +++ /dev/null @@ -1,146 +0,0 @@ -From eff8924b57d21eadfe749e500617340b1a730c17 Mon Sep 17 00:00:00 2001 -From: Schuyler Patton -Date: Thu, 30 Jun 2011 13:39:25 -0500 -Subject: [PATCH 1/3] omap3_evm: Added function calls to set volts, speed on OMAP36xx parts - -* evm.c - -* Added setup calls to set voltage and speed - -* Added calls in misc_init_r to twl4030_power_mpu_init and set_mpu_clock - functions. These set VDD1 to 1.35v and mpu clock to 1GHz respectively. - There is a check performed to make sure that this is only called on - omap36xx class parts. - -* twl4030.c - -* Added twl4030_power_mpu_init function to set VDD1 to 1.35 Volts - -* This is done to allow omap36xx parts to run at 1GHz. - -* clock.c - -* Added set_mpu_clk function to allow u-boot to set the clock - rate. - -* sys_proto.h - -* Added the function prototype set_mpu_clock - -* twl4030.h - -* Added twl4030_power_mpu_init function prototype - -Upstream-Status: Pending - -Signed-off-by: Schuyler Patton ---- - arch/arm/cpu/armv7/omap3/clock.c | 15 +++++++++++++++ - arch/arm/include/asm/arch-omap3/sys_proto.h | 2 ++ - board/ti/evm/evm.c | 5 +++++ - drivers/power/twl4030.c | 12 ++++++++++++ - include/twl4030.h | 3 +++ - 5 files changed, 37 insertions(+), 0 deletions(-) - -diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c -index 567817e..46a28a3 100644 ---- a/arch/arm/cpu/armv7/omap3/clock.c -+++ b/arch/arm/cpu/armv7/omap3/clock.c -@@ -35,6 +35,21 @@ - #include - - /****************************************************************************** -+ * Setting the Clock speed -+ * -+ *****************************************************************************/ -+void set_mpu_clk(int speed) -+{ -+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE; -+ -+ -+ /* Set M */ -+ sr32(&prcm_base->clksel1_pll_mpu, 8, 11, speed); -+ /* lock mode */ -+ sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK); -+} -+ -+/****************************************************************************** - * get_sys_clk_speed() - determine reference oscillator speed - * based on known 32kHz clock and gptimer. - *****************************************************************************/ -diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h -index 2a89e56..9db13d7 100644 ---- a/arch/arm/include/asm/arch-omap3/sys_proto.h -+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h -@@ -36,6 +36,8 @@ void prcm_init(void); - void per_clocks_enable(void); - void ehci_clocks_enable(void); - -+void set_mpu_clk(int speed); -+ - void memif_init(void); - void sdrc_init(void); - void do_sdrc_init(u32, u32); -diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c -index 8497aee..91eb93d 100644 ---- a/board/ti/evm/evm.c -+++ b/board/ti/evm/evm.c -@@ -39,6 +39,7 @@ - #include - #include - #include "evm.h" -+#include - - #define OMAP3EVM_GPIO_ETH_RST_GEN1 64 - #define OMAP3EVM_GPIO_ETH_RST_GEN2 7 -@@ -177,6 +178,10 @@ int misc_init_r(void) - #endif - dieid_num_r(); - -+ if (get_cpu_family() == CPU_OMAP36XX) { -+ twl4030_power_mpu_init(); -+ set_mpu_clk(500); -+ } - return 0; - } - -diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c -index 36b2144..670b4cb 100644 ---- a/drivers/power/twl4030.c -+++ b/drivers/power/twl4030.c -@@ -105,6 +105,18 @@ void twl4030_power_init(void) - TWL4030_PM_RECEIVER_DEV_GRP_P1); - } - -+#define VDD1_VSEL_135 0x3C -+ -+void twl4030_power_mpu_init(void) -+{ -+ unsigned char byte; -+ -+ /* 1.4 Volts */ -+ byte = VDD1_VSEL_135; -+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, -+ TWL4030_PM_RECEIVER_VDD1_VSEL); -+} -+ - void twl4030_power_mmc_init(void) - { - /* Set VMMC1 to 3.15 Volts */ -diff --git a/include/twl4030.h b/include/twl4030.h -index 9cd32ab..91d36b8 100644 ---- a/include/twl4030.h -+++ b/include/twl4030.h -@@ -510,6 +510,9 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) - * Power - */ - -+/*For setting VDD1 */ -+void twl4030_power_mpu_init(void); -+ - /* For hardware resetting */ - void twl4030_power_reset_init(void); - /* For setting device group and voltage */ --- -1.7.0.4 - diff --git a/recipes-bsp/u-boot/u-boot-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch b/recipes-bsp/u-boot/u-boot-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch deleted file mode 100644 index 53657c08..00000000 --- a/recipes-bsp/u-boot/u-boot-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 883551659d9b15dfb1ed7ad8ae4b34bfd1fa0fd9 Mon Sep 17 00:00:00 2001 -From: Tom Rini -Date: Wed, 16 Nov 2011 14:50:49 -0700 -Subject: [PATCH 2/4] am335x/am3517evm/beagleboard/am37x: Add CONFIG_CMD_ASKENV - -This is TI Sitara SDK specific (unified user experience, askenv command). - -Upstream-Status: Pending - * This will be submitted upstream by Tom Rini - -Signed-off-by: Tom Rini ---- - include/configs/am335x_evm.h | 2 ++ - include/configs/am3517_evm.h | 2 ++ - include/configs/omap3_beagle.h | 2 ++ - include/configs/omap3_evm.h | 2 ++ - 4 files changed, 8 insertions(+), 0 deletions(-) - -diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h -index d0fbc88..5cd7d6d 100644 ---- a/include/configs/am335x_evm.h -+++ b/include/configs/am335x_evm.h -@@ -26,6 +26,8 @@ - #include - #include - -+#define CONFIG_CMD_ASKENV -+ - #define CONFIG_ENV_SIZE 0x400 - #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 * 1024)) - #define CONFIG_SYS_PROMPT "U-Boot# " -diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h -index b5f75d1..2b3fce7 100644 ---- a/include/configs/am3517_evm.h -+++ b/include/configs/am3517_evm.h -@@ -137,6 +137,8 @@ - /* commands to include */ - #include - -+#define CONFIG_CMD_ASKENV -+ - #define CONFIG_CMD_EXT2 /* EXT2 Support */ - #define CONFIG_CMD_FAT /* FAT support */ - #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ -diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h -index ba73aa6..b270598 100644 ---- a/include/configs/omap3_beagle.h -+++ b/include/configs/omap3_beagle.h -@@ -146,6 +146,8 @@ - /* commands to include */ - #include - -+#define CONFIG_CMD_ASKENV -+ - #define CONFIG_CMD_CACHE - #define CONFIG_CMD_EXT2 /* EXT2 Support */ - #define CONFIG_CMD_FAT /* FAT support */ -diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h -index 1fcb7af..215d67d 100644 ---- a/include/configs/omap3_evm.h -+++ b/include/configs/omap3_evm.h -@@ -42,6 +42,8 @@ - */ - #include - -+#define CONFIG_CMD_ASKENV -+ - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT - #define CONFIG_CMD_JFFS2 --- -1.7.0.4 - diff --git a/recipes-bsp/u-boot/u-boot-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch b/recipes-bsp/u-boot/u-boot-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch deleted file mode 100644 index 6170ddfd..00000000 --- a/recipes-bsp/u-boot/u-boot-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch +++ /dev/null @@ -1,36 +0,0 @@ -From a0f4f7b85d004db36a24cc05e9c34f137186270b Mon Sep 17 00:00:00 2001 -From: Chase Maupin -Date: Wed, 23 May 2012 09:25:06 -0500 -Subject: [PATCH 2/3] omap3evm: Make the board start at 800MHz - -* It is safe to start the the 3630 silicon at 800MHz for all - revisions. Go ahead and bump the speed to 800MHz during boot - instead of using the default 500MHz speed. -* This patch was based on work by Tom Rini at - http://arago-project.org/git/projects/?p=u-boot-am33x.git;a=commit;h=ad130035df754931f2939902e453cc3736412f5f - -Upstream-Status: Pending - * Will be submitted upstream since it is safe for all silicon - revisions to boot at 800MHz according to HW team. - -Signed-off-by: Chase Maupin ---- - board/ti/evm/evm.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - -diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c -index 91eb93d..0d0b4a2 100644 ---- a/board/ti/evm/evm.c -+++ b/board/ti/evm/evm.c -@@ -180,7 +180,7 @@ int misc_init_r(void) - - if (get_cpu_family() == CPU_OMAP36XX) { - twl4030_power_mpu_init(); -- set_mpu_clk(500); -+ set_mpu_clk(800); - } - return 0; - } --- -1.7.0.4 - diff --git a/recipes-bsp/u-boot/u-boot-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch b/recipes-bsp/u-boot/u-boot-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch deleted file mode 100644 index c40da83c..00000000 --- a/recipes-bsp/u-boot/u-boot-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch +++ /dev/null @@ -1,34 +0,0 @@ -From f2a15cd9e96648e05cb39159ba74cbfbfc8ff999 Mon Sep 17 00:00:00 2001 -From: Tom Rini -Date: Thu, 17 Nov 2011 08:41:42 -0700 -Subject: [PATCH 3/4] beagleboard: Load uImage from VFAT by default. - -This is TI Sitara SDK specific (unified user experience, load uImage -from vfat). - -Upstream-Status: Not Appropriate - * This patch is to make the u-boot for beagleboard consistent - with other versions used in the AMSDK and doesn't make - sense up stream. - -Signed-off-by: Tom Rini ---- - include/configs/omap3_beagle.h | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - -diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h -index b270598..ea62580 100644 ---- a/include/configs/omap3_beagle.h -+++ b/include/configs/omap3_beagle.h -@@ -305,7 +305,7 @@ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ -- "if run loaduimage; then " \ -+ "if run loaduimagefat; then " \ - "run mmcboot;" \ - "fi;" \ - "fi;" \ --- -1.7.0.4 - diff --git a/recipes-bsp/u-boot/u-boot-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch b/recipes-bsp/u-boot/u-boot-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch deleted file mode 100644 index 20b47d07..00000000 --- a/recipes-bsp/u-boot/u-boot-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 372d110126f37f9f8b7d4bbedd3f02cf80e587de Mon Sep 17 00:00:00 2001 -From: Tom Rini -Date: Wed, 30 Nov 2011 16:16:21 -0700 -Subject: [PATCH 3/3] beagleboard: Make xM rev C go to 800MHz - -* This is the highest frequency supported on xM without BIAS - drivers. - -Upstream-Status: Pending - * Will be submitted upstream since it is safe for all silicon - revisions to boot at 800MHz according to HW team. - -Signed-off-by: Tom Rini ---- - board/ti/beagle/beagle.c | 3 +++ - 1 files changed, 3 insertions(+), 0 deletions(-) - -diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c -index e26b387..69a7b4e 100644 ---- a/board/ti/beagle/beagle.c -+++ b/board/ti/beagle/beagle.c -@@ -346,6 +346,9 @@ int misc_init_r(void) - TWL4030_PM_RECEIVER_VAUX2_VSEL_18, - TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); -+ /* 800MHz support */ -+ twl4030_power_mpu_init(); -+ set_mpu_clk(800); - break; - default: - printf("Beagle unknown 0x%02x\n", get_board_revision()); --- -1.7.0.4 - diff --git a/recipes-bsp/u-boot/u-boot-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch b/recipes-bsp/u-boot/u-boot-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch deleted file mode 100644 index 86d6622a..00000000 --- a/recipes-bsp/u-boot/u-boot-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 715afb049d2675106e26c5225e7e321374c32f85 Mon Sep 17 00:00:00 2001 -From: Tom Rini -Date: Thu, 17 Nov 2011 16:54:01 -0700 -Subject: [PATCH 4/4] beagleboard: Load uImage to the default kernel linux address - -This is TI Sitara SDK specific (unified user experience, load uImage -to an 'XIP' location). - -Upstream-Status: Pending - * This functionality is being discussed upstream and there - is not a concensus yet. - -Signed-off-by: Tom Rini ---- - include/configs/omap3_beagle.h | 13 +++++++------ - 1 files changed, 7 insertions(+), 6 deletions(-) - -diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h -index ea62580..00b2abe 100644 ---- a/include/configs/omap3_beagle.h -+++ b/include/configs/omap3_beagle.h -@@ -219,6 +219,7 @@ - - #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ -+ "kloadaddr=0x80007fc0\0" \ - "rdaddr=0x81000000\0" \ - "usbtty=cdc_acm\0" \ - "usbethaddr=de:ad:be:ef\0" \ -@@ -272,18 +273,18 @@ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ -- "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ -- "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \ -+ "loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} uImage\0" \ -+ "loaduimage=ext2load mmc ${mmcdev}:2 ${kloadaddr} /boot/uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ -- "bootm ${loadaddr}\0" \ -+ "bootm ${kloadaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ -- "nand read ${loadaddr} 280000 400000; " \ -- "bootm ${loadaddr}\0" \ -+ "nand read ${kloadaddr} 280000 400000; " \ -+ "bootm ${kloadaddr}\0" \ - "ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ -- "bootm ${loadaddr}\0" \ -+ "bootm ${kloadaddr}\0" \ - "userbutton=if gpio input 173; then run userbutton_xm; " \ - "else run userbutton_nonxm; fi;\0" \ - "userbutton_xm=gpio input 4;\0" \ --- -1.7.0.4 - diff --git a/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch new file mode 100644 index 00000000..d36d8093 --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch @@ -0,0 +1,172 @@ +From e0820ccc38315d88192c19e98ea9b59d3ec7d4c8 Mon Sep 17 00:00:00 2001 +From: Tom Rini +Date: Tue, 8 May 2012 07:29:31 +0000 +Subject: [PATCH] ARM: omap3: Set SPL stack size to 8KB, image to 54KB. + +With older toolchains it is possible to not fit entirely into the 45KB +that we had assigned to SPL. Adjust to allow for 8KB of stack (which +should be more than required) and 54KB of text/data. + +Cc: Vaibhav Hiremath +Cc: Nagendra T S +Cc: Thomas Weber +Cc: Ilya Yanok +Cc: Steve Sakoman +Cc: Stefano Babic +Signed-off-by: Tom Rini +Acked-by: Stefano Babic +Acked-by: Vaibhav Hiremath +--- + doc/SPL/README.omap3 | 4 ++-- + include/configs/am3517_crane.h | 2 +- + include/configs/am3517_evm.h | 2 +- + include/configs/devkit8000.h | 2 +- + include/configs/mcx.h | 2 +- + include/configs/omap3_beagle.h | 2 +- + include/configs/omap3_evm_common.h | 2 +- + include/configs/omap3_overo.h | 2 +- + include/configs/tam3517-common.h | 2 +- + include/configs/tricorder.h | 2 +- + 10 files changed, 11 insertions(+), 11 deletions(-) + +diff --git a/doc/SPL/README.omap3 b/doc/SPL/README.omap3 +index cc5d5c0..a543e65 100644 +--- a/doc/SPL/README.omap3 ++++ b/doc/SPL/README.omap3 +@@ -34,14 +34,14 @@ DDR1: 0x80000000 - 0xBFFFFFFF + + Option 1 (SPL only): + 0x40200800 - 0x4020BBFF: Area for SPL text, data and rodata +-0x4020BC00 - 0x4020FFFC: Area for the SPL stack. ++0x4020E000 - 0x4020FFFC: Area for the SPL stack. + 0x80000000 - 0x8007FFFF: Area for the SPL BSS. + 0x80100000: CONFIG_SYS_TEXT_BASE of U-Boot + 0x80208000 - 0x80307FFF: malloc() pool available to SPL. + + Option 2 (SPL or X-Loader): + 0x40200800 - 0x4020BBFF: Area for SPL text, data and rodata +-0x4020BC00 - 0x4020FFFC: Area for the SPL stack. ++0x4020E000 - 0x4020FFFC: Area for the SPL stack. + 0x80008000: CONFIG_SYS_TEXT_BASE of U-Boot + 0x87000000 - 0x8707FFFF: Area for the SPL BSS. + 0x87080000 - 0x870FFFFF: malloc() pool available to SPL. +diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h +index 71321f3..1233985 100644 +--- a/include/configs/am3517_crane.h ++++ b/include/configs/am3517_crane.h +@@ -325,7 +325,7 @@ + #define CONFIG_SPL + #define CONFIG_SPL_NAND_SIMPLE + #define CONFIG_SPL_TEXT_BASE 0x40200800 +-#define CONFIG_SPL_MAX_SIZE (45 * 1024) ++#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ + #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + + #define CONFIG_SPL_BSS_START_ADDR 0x80000000 +diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h +index bbd19de..ff8d1b0 100644 +--- a/include/configs/am3517_evm.h ++++ b/include/configs/am3517_evm.h +@@ -324,7 +324,7 @@ + #define CONFIG_SPL + #define CONFIG_SPL_NAND_SIMPLE + #define CONFIG_SPL_TEXT_BASE 0x40200800 +-#define CONFIG_SPL_MAX_SIZE (45 * 1024) ++#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ + #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + + #define CONFIG_SPL_BSS_START_ADDR 0x80000000 +diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h +index eb7c376..248a5b2 100644 +--- a/include/configs/devkit8000.h ++++ b/include/configs/devkit8000.h +@@ -324,7 +324,7 @@ + #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ + + #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ +-#define CONFIG_SPL_MAX_SIZE 0xB400 /* 45 K */ ++#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ + #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + + #define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ +diff --git a/include/configs/mcx.h b/include/configs/mcx.h +index e190e3e..f6a83a8 100644 +--- a/include/configs/mcx.h ++++ b/include/configs/mcx.h +@@ -325,7 +325,7 @@ + #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + + #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ +-#define CONFIG_SPL_MAX_SIZE (45 << 10) ++#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ + #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + + /* move malloc and bss high to prevent clashing with the main image */ +diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h +index ddeb414..6bdc2c3 100644 +--- a/include/configs/omap3_beagle.h ++++ b/include/configs/omap3_beagle.h +@@ -399,7 +399,7 @@ + #define CONFIG_SPL + #define CONFIG_SPL_NAND_SIMPLE + #define CONFIG_SPL_TEXT_BASE 0x40200800 +-#define CONFIG_SPL_MAX_SIZE (45 * 1024) ++#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ + #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + + #define CONFIG_SPL_BSS_START_ADDR 0x80000000 +diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h +index 4910dda..47ebbef 100644 +--- a/include/configs/omap3_evm_common.h ++++ b/include/configs/omap3_evm_common.h +@@ -282,7 +282,7 @@ + /* Defines for SPL */ + #define CONFIG_SPL + #define CONFIG_SPL_TEXT_BASE 0x40200800 +-#define CONFIG_SPL_MAX_SIZE (45 * 1024) /* 45 KB */ ++#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ + #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + + #define CONFIG_SPL_BSS_START_ADDR 0x80000000 +diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h +index 64adc74..b0d144f 100644 +--- a/include/configs/omap3_overo.h ++++ b/include/configs/omap3_overo.h +@@ -303,7 +303,7 @@ + #define CONFIG_SPL + #define CONFIG_SPL_NAND_SIMPLE + #define CONFIG_SPL_TEXT_BASE 0x40200800 +-#define CONFIG_SPL_MAX_SIZE (45 * 1024) ++#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ + #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + + /* move malloc and bss high to prevent clashing with the main image */ +diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h +index 37eb87b..3fc2c44 100644 +--- a/include/configs/tam3517-common.h ++++ b/include/configs/tam3517-common.h +@@ -257,7 +257,7 @@ + #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + + #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ +-#define CONFIG_SPL_MAX_SIZE (45 << 10) /* 45 K */ ++#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ + #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + + #define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 +diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h +index 801a24f..ab911aa 100644 +--- a/include/configs/tricorder.h ++++ b/include/configs/tricorder.h +@@ -293,7 +293,7 @@ + #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ + + #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ +-#define CONFIG_SPL_MAX_SIZE 0xB400 /* 45 K */ ++#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ + #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + + #define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ +-- +1.7.0.4 + diff --git a/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch new file mode 100644 index 00000000..4fb89e1f --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch @@ -0,0 +1,31 @@ +From 55161fca67023d6be30bdea495cc0fdbae316a64 Mon Sep 17 00:00:00 2001 +From: Tom Rini +Date: Wed, 9 Nov 2011 11:48:21 -0700 +Subject: [PATCH 1/4] OMAP3 Beagle: Set BOOTDELAY to 3 + +This is TI Sitara SDK specific (unified user experience, 3s delay). + +Upstream-Status: Pending + * This will be submitted upstream by Tom Rini + +Signed-off-by: Tom Rini +--- + include/configs/omap3_beagle.h | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h +index 58a29b8..ba73aa6 100644 +--- a/include/configs/omap3_beagle.h ++++ b/include/configs/omap3_beagle.h +@@ -213,7 +213,7 @@ + /* partition */ + + /* Environment information */ +-#define CONFIG_BOOTDELAY 2 ++#define CONFIG_BOOTDELAY 3 + + #define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x80200000\0" \ +-- +1.7.0.4 + diff --git a/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch new file mode 100644 index 00000000..05df3222 --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch @@ -0,0 +1,40 @@ +From c56786770eb0ccb95204cb72b961c44c65ff343b Mon Sep 17 00:00:00 2001 +From: Chase Maupin +Date: Thu, 17 May 2012 09:51:50 -0500 +Subject: [PATCH] omap3_beagle: add usbethaddr setting to enable networking + +* In order for the SMSC USB ethernet device to work the + usbethaddr setting must be set when the "usb start" command + is executed and the network device is discovered. +* Currently set this for de:ad:be:ef until we can start + generating random or semi-random MAC addresses. +* Based on work by Steve Kipisz and Joel Fernandez + +Upstream-Status: Not Upstreamable + * We cannot upstream this hard coded MAC address setting. + * User's should look at the following web page for information on + how to generate a MAC address, but this patch enables the out + of box experience for the SDK. + http://www.denx.de/wiki/view/DULG/WhereCanIGetAValidMACAddress + + +Signed-off-by: Chase Maupin +--- + include/configs/omap3_beagle.h | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h +index ddeb414..58a29b8 100644 +--- a/include/configs/omap3_beagle.h ++++ b/include/configs/omap3_beagle.h +@@ -219,6 +219,7 @@ + "loadaddr=0x80200000\0" \ + "rdaddr=0x81000000\0" \ + "usbtty=cdc_acm\0" \ ++ "usbethaddr=de:ad:be:ef\0" \ + "bootfile=uImage.beagle\0" \ + "console=ttyO2,115200n8\0" \ + "mpurate=auto\0" \ +-- +1.7.0.4 + diff --git a/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch new file mode 100644 index 00000000..4fc6e98a --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch @@ -0,0 +1,146 @@ +From eff8924b57d21eadfe749e500617340b1a730c17 Mon Sep 17 00:00:00 2001 +From: Schuyler Patton +Date: Thu, 30 Jun 2011 13:39:25 -0500 +Subject: [PATCH 1/3] omap3_evm: Added function calls to set volts, speed on OMAP36xx parts + +* evm.c + +* Added setup calls to set voltage and speed + +* Added calls in misc_init_r to twl4030_power_mpu_init and set_mpu_clock + functions. These set VDD1 to 1.35v and mpu clock to 1GHz respectively. + There is a check performed to make sure that this is only called on + omap36xx class parts. + +* twl4030.c + +* Added twl4030_power_mpu_init function to set VDD1 to 1.35 Volts + +* This is done to allow omap36xx parts to run at 1GHz. + +* clock.c + +* Added set_mpu_clk function to allow u-boot to set the clock + rate. + +* sys_proto.h + +* Added the function prototype set_mpu_clock + +* twl4030.h + +* Added twl4030_power_mpu_init function prototype + +Upstream-Status: Pending + +Signed-off-by: Schuyler Patton +--- + arch/arm/cpu/armv7/omap3/clock.c | 15 +++++++++++++++ + arch/arm/include/asm/arch-omap3/sys_proto.h | 2 ++ + board/ti/evm/evm.c | 5 +++++ + drivers/power/twl4030.c | 12 ++++++++++++ + include/twl4030.h | 3 +++ + 5 files changed, 37 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c +index 567817e..46a28a3 100644 +--- a/arch/arm/cpu/armv7/omap3/clock.c ++++ b/arch/arm/cpu/armv7/omap3/clock.c +@@ -35,6 +35,21 @@ + #include + + /****************************************************************************** ++ * Setting the Clock speed ++ * ++ *****************************************************************************/ ++void set_mpu_clk(int speed) ++{ ++ struct prcm *prcm_base = (struct prcm *)PRCM_BASE; ++ ++ ++ /* Set M */ ++ sr32(&prcm_base->clksel1_pll_mpu, 8, 11, speed); ++ /* lock mode */ ++ sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK); ++} ++ ++/****************************************************************************** + * get_sys_clk_speed() - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *****************************************************************************/ +diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h +index 2a89e56..9db13d7 100644 +--- a/arch/arm/include/asm/arch-omap3/sys_proto.h ++++ b/arch/arm/include/asm/arch-omap3/sys_proto.h +@@ -36,6 +36,8 @@ void prcm_init(void); + void per_clocks_enable(void); + void ehci_clocks_enable(void); + ++void set_mpu_clk(int speed); ++ + void memif_init(void); + void sdrc_init(void); + void do_sdrc_init(u32, u32); +diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c +index 8497aee..91eb93d 100644 +--- a/board/ti/evm/evm.c ++++ b/board/ti/evm/evm.c +@@ -39,6 +39,7 @@ + #include + #include + #include "evm.h" ++#include + + #define OMAP3EVM_GPIO_ETH_RST_GEN1 64 + #define OMAP3EVM_GPIO_ETH_RST_GEN2 7 +@@ -177,6 +178,10 @@ int misc_init_r(void) + #endif + dieid_num_r(); + ++ if (get_cpu_family() == CPU_OMAP36XX) { ++ twl4030_power_mpu_init(); ++ set_mpu_clk(500); ++ } + return 0; + } + +diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c +index 36b2144..670b4cb 100644 +--- a/drivers/power/twl4030.c ++++ b/drivers/power/twl4030.c +@@ -105,6 +105,18 @@ void twl4030_power_init(void) + TWL4030_PM_RECEIVER_DEV_GRP_P1); + } + ++#define VDD1_VSEL_135 0x3C ++ ++void twl4030_power_mpu_init(void) ++{ ++ unsigned char byte; ++ ++ /* 1.4 Volts */ ++ byte = VDD1_VSEL_135; ++ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, ++ TWL4030_PM_RECEIVER_VDD1_VSEL); ++} ++ + void twl4030_power_mmc_init(void) + { + /* Set VMMC1 to 3.15 Volts */ +diff --git a/include/twl4030.h b/include/twl4030.h +index 9cd32ab..91d36b8 100644 +--- a/include/twl4030.h ++++ b/include/twl4030.h +@@ -510,6 +510,9 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) + * Power + */ + ++/*For setting VDD1 */ ++void twl4030_power_mpu_init(void); ++ + /* For hardware resetting */ + void twl4030_power_reset_init(void); + /* For setting device group and voltage */ +-- +1.7.0.4 + diff --git a/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch new file mode 100644 index 00000000..53657c08 --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch @@ -0,0 +1,73 @@ +From 883551659d9b15dfb1ed7ad8ae4b34bfd1fa0fd9 Mon Sep 17 00:00:00 2001 +From: Tom Rini +Date: Wed, 16 Nov 2011 14:50:49 -0700 +Subject: [PATCH 2/4] am335x/am3517evm/beagleboard/am37x: Add CONFIG_CMD_ASKENV + +This is TI Sitara SDK specific (unified user experience, askenv command). + +Upstream-Status: Pending + * This will be submitted upstream by Tom Rini + +Signed-off-by: Tom Rini +--- + include/configs/am335x_evm.h | 2 ++ + include/configs/am3517_evm.h | 2 ++ + include/configs/omap3_beagle.h | 2 ++ + include/configs/omap3_evm.h | 2 ++ + 4 files changed, 8 insertions(+), 0 deletions(-) + +diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h +index d0fbc88..5cd7d6d 100644 +--- a/include/configs/am335x_evm.h ++++ b/include/configs/am335x_evm.h +@@ -26,6 +26,8 @@ + #include + #include + ++#define CONFIG_CMD_ASKENV ++ + #define CONFIG_ENV_SIZE 0x400 + #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 * 1024)) + #define CONFIG_SYS_PROMPT "U-Boot# " +diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h +index b5f75d1..2b3fce7 100644 +--- a/include/configs/am3517_evm.h ++++ b/include/configs/am3517_evm.h +@@ -137,6 +137,8 @@ + /* commands to include */ + #include + ++#define CONFIG_CMD_ASKENV ++ + #define CONFIG_CMD_EXT2 /* EXT2 Support */ + #define CONFIG_CMD_FAT /* FAT support */ + #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h +index ba73aa6..b270598 100644 +--- a/include/configs/omap3_beagle.h ++++ b/include/configs/omap3_beagle.h +@@ -146,6 +146,8 @@ + /* commands to include */ + #include + ++#define CONFIG_CMD_ASKENV ++ + #define CONFIG_CMD_CACHE + #define CONFIG_CMD_EXT2 /* EXT2 Support */ + #define CONFIG_CMD_FAT /* FAT support */ +diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h +index 1fcb7af..215d67d 100644 +--- a/include/configs/omap3_evm.h ++++ b/include/configs/omap3_evm.h +@@ -42,6 +42,8 @@ + */ + #include + ++#define CONFIG_CMD_ASKENV ++ + #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_FAT + #define CONFIG_CMD_JFFS2 +-- +1.7.0.4 + diff --git a/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch new file mode 100644 index 00000000..6170ddfd --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch @@ -0,0 +1,36 @@ +From a0f4f7b85d004db36a24cc05e9c34f137186270b Mon Sep 17 00:00:00 2001 +From: Chase Maupin +Date: Wed, 23 May 2012 09:25:06 -0500 +Subject: [PATCH 2/3] omap3evm: Make the board start at 800MHz + +* It is safe to start the the 3630 silicon at 800MHz for all + revisions. Go ahead and bump the speed to 800MHz during boot + instead of using the default 500MHz speed. +* This patch was based on work by Tom Rini at + http://arago-project.org/git/projects/?p=u-boot-am33x.git;a=commit;h=ad130035df754931f2939902e453cc3736412f5f + +Upstream-Status: Pending + * Will be submitted upstream since it is safe for all silicon + revisions to boot at 800MHz according to HW team. + +Signed-off-by: Chase Maupin +--- + board/ti/evm/evm.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c +index 91eb93d..0d0b4a2 100644 +--- a/board/ti/evm/evm.c ++++ b/board/ti/evm/evm.c +@@ -180,7 +180,7 @@ int misc_init_r(void) + + if (get_cpu_family() == CPU_OMAP36XX) { + twl4030_power_mpu_init(); +- set_mpu_clk(500); ++ set_mpu_clk(800); + } + return 0; + } +-- +1.7.0.4 + diff --git a/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch new file mode 100644 index 00000000..c40da83c --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch @@ -0,0 +1,34 @@ +From f2a15cd9e96648e05cb39159ba74cbfbfc8ff999 Mon Sep 17 00:00:00 2001 +From: Tom Rini +Date: Thu, 17 Nov 2011 08:41:42 -0700 +Subject: [PATCH 3/4] beagleboard: Load uImage from VFAT by default. + +This is TI Sitara SDK specific (unified user experience, load uImage +from vfat). + +Upstream-Status: Not Appropriate + * This patch is to make the u-boot for beagleboard consistent + with other versions used in the AMSDK and doesn't make + sense up stream. + +Signed-off-by: Tom Rini +--- + include/configs/omap3_beagle.h | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h +index b270598..ea62580 100644 +--- a/include/configs/omap3_beagle.h ++++ b/include/configs/omap3_beagle.h +@@ -305,7 +305,7 @@ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ +- "if run loaduimage; then " \ ++ "if run loaduimagefat; then " \ + "run mmcboot;" \ + "fi;" \ + "fi;" \ +-- +1.7.0.4 + diff --git a/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch new file mode 100644 index 00000000..20b47d07 --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch @@ -0,0 +1,34 @@ +From 372d110126f37f9f8b7d4bbedd3f02cf80e587de Mon Sep 17 00:00:00 2001 +From: Tom Rini +Date: Wed, 30 Nov 2011 16:16:21 -0700 +Subject: [PATCH 3/3] beagleboard: Make xM rev C go to 800MHz + +* This is the highest frequency supported on xM without BIAS + drivers. + +Upstream-Status: Pending + * Will be submitted upstream since it is safe for all silicon + revisions to boot at 800MHz according to HW team. + +Signed-off-by: Tom Rini +--- + board/ti/beagle/beagle.c | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c +index e26b387..69a7b4e 100644 +--- a/board/ti/beagle/beagle.c ++++ b/board/ti/beagle/beagle.c +@@ -346,6 +346,9 @@ int misc_init_r(void) + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); ++ /* 800MHz support */ ++ twl4030_power_mpu_init(); ++ set_mpu_clk(800); + break; + default: + printf("Beagle unknown 0x%02x\n", get_board_revision()); +-- +1.7.0.4 + diff --git a/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch new file mode 100644 index 00000000..86d6622a --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch @@ -0,0 +1,57 @@ +From 715afb049d2675106e26c5225e7e321374c32f85 Mon Sep 17 00:00:00 2001 +From: Tom Rini +Date: Thu, 17 Nov 2011 16:54:01 -0700 +Subject: [PATCH 4/4] beagleboard: Load uImage to the default kernel linux address + +This is TI Sitara SDK specific (unified user experience, load uImage +to an 'XIP' location). + +Upstream-Status: Pending + * This functionality is being discussed upstream and there + is not a concensus yet. + +Signed-off-by: Tom Rini +--- + include/configs/omap3_beagle.h | 13 +++++++------ + 1 files changed, 7 insertions(+), 6 deletions(-) + +diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h +index ea62580..00b2abe 100644 +--- a/include/configs/omap3_beagle.h ++++ b/include/configs/omap3_beagle.h +@@ -219,6 +219,7 @@ + + #define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x80200000\0" \ ++ "kloadaddr=0x80007fc0\0" \ + "rdaddr=0x81000000\0" \ + "usbtty=cdc_acm\0" \ + "usbethaddr=de:ad:be:ef\0" \ +@@ -272,18 +273,18 @@ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ + "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ +- "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ +- "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \ ++ "loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} uImage\0" \ ++ "loaduimage=ext2load mmc ${mmcdev}:2 ${kloadaddr} /boot/uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ +- "bootm ${loadaddr}\0" \ ++ "bootm ${kloadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ +- "nand read ${loadaddr} 280000 400000; " \ +- "bootm ${loadaddr}\0" \ ++ "nand read ${kloadaddr} 280000 400000; " \ ++ "bootm ${kloadaddr}\0" \ + "ramboot=echo Booting from ramdisk ...; " \ + "run ramargs; " \ +- "bootm ${loadaddr}\0" \ ++ "bootm ${kloadaddr}\0" \ + "userbutton=if gpio input 173; then run userbutton_xm; " \ + "else run userbutton_nonxm; fi;\0" \ + "userbutton_xm=gpio input 4;\0" \ +-- +1.7.0.4 + diff --git a/recipes-bsp/u-boot/u-boot-am37x_2012.04.01.bb b/recipes-bsp/u-boot/u-boot-am37x_2012.04.01.bb new file mode 100644 index 00000000..c25cf1e4 --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-am37x_2012.04.01.bb @@ -0,0 +1,38 @@ +require u-boot-ti.inc + +DESCRIPTION = "u-boot bootloader for ARM MPU devices" + +COMPATIBLE_MACHINE = "am37x-evm|beagleboard" + +BRANCH ?= "master" + +# v2012.04.01 +SRCREV = "415d386877df49eb051b85ef74fa59a16dc17c7d" + +SRC_URI = "git://git.denx.de/u-boot.git;protocol=git;branch=${BRANCH}" + +# Add patches for the AMSDK +# - 0001-omap3-beagle-add-usbethaddr....Not for Upstream +# - 0001-OMAP3-Beagle-Set-BOOTDELAY....Pending Upstream +# - 0002-am335x-am3517evm-beagleboard....Pending Upstream +# - 0003-beagleboard-Load-uImage-from....Not for Upstream +# - 0004-beagleboard-Load-uImage-to....Pending Upstream +# - 0001-omap3_evm-Added-function....Pending Upstream +# - 0002-omap3evm-Make-the-board....Pending Upstream +# - 0003-beagleboard-Make-xM-rev....Pending Upstream +# - 0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch....Upstreamed + +# Add a patch to set a default usbethaddr address to enable the out of box +# experience. +SRC_URI += "file://0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch \ + file://0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch \ + file://0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch \ + file://0003-beagleboard-Load-uImage-from-VFAT-by-default.patch \ + file://0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch \ + file://0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch \ + file://0002-omap3evm-Make-the-board-start-at-800MHz.patch \ + file://0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch \ + file://0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch \ + " + +SPL_BINARY = "MLO" diff --git a/recipes-bsp/u-boot/u-boot_2012.04.01.bb b/recipes-bsp/u-boot/u-boot_2012.04.01.bb deleted file mode 100644 index 6cc63ed0..00000000 --- a/recipes-bsp/u-boot/u-boot_2012.04.01.bb +++ /dev/null @@ -1,50 +0,0 @@ -# Use the version of u-boot.inc in oe-core not the meta-ti version -require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc - -DESCRIPTION = "u-boot bootloader for ARM MPU devices" - -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb" - -DEFAULT_PREFERENCE = "-1" - -COMPATIBLE_MACHINE = "am37x-evm|beagleboard" - -PACKAGE_ARCH = "${MACHINE_ARCH}" - -BRANCH ?= "master" - -SRCREV = "v2012.04.01" - -S = "${WORKDIR}/git" - -SRC_URI = "git://git.denx.de/u-boot.git;protocol=git;branch=${BRANCH}" - -# Add patches for the AMSDK -# - 0001-omap3-beagle-add-usbethaddr....Not for Upstream -# - 0001-OMAP3-Beagle-Set-BOOTDELAY....Pending Upstream -# - 0002-am335x-am3517evm-beagleboard....Pending Upstream -# - 0003-beagleboard-Load-uImage-from....Not for Upstream -# - 0004-beagleboard-Load-uImage-to....Pending Upstream -# - 0001-omap3_evm-Added-function....Pending Upstream -# - 0002-omap3evm-Make-the-board....Pending Upstream -# - 0003-beagleboard-Make-xM-rev....Pending Upstream -# - 0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch....Upstreamed - -# Add a patch to set a default usbethaddr address to enable the out of box -# experience. -SRC_URI += "file://0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch \ - file://0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch \ - file://0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch \ - file://0003-beagleboard-Load-uImage-from-VFAT-by-default.patch \ - file://0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch \ - file://0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch \ - file://0002-omap3evm-Make-the-board-start-at-800MHz.patch \ - file://0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch \ - file://0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch \ - " - -UBOOT_SUFFIX = "img" - -# Set the name of the SPL that will built so that it is also packaged with u-boot. -SPL_BINARY = "MLO" -- cgit v1.2.3-54-g00ecf