| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
| |
The SHA for optee_os had been of 3.20-rc1 tag instead of 3.20 tag which
had been marked stable. Change the tag to 3.20.
Fixes: 280e7b4b3a17 ("optee: update optee components to 3.20 tag")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Lets add the basic AM62A configuration
- Add machine conf for AM62A.
- The wic images will boot on AM62A HS-FS devices by default. The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively.
- Add ti-sci-firmware overrides.
- Sign ATF, OPTEE and RTOS Firmware.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
OPTEE tests is not being upgraded due to a newer python dependency for
the build
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
This reverts commit 9a007a3feab823eb4b72276103a08306b1abb066.
We ran into some build failures on the older legacy platforms due
to this change and so are reverting this while we investigate.
|
|
|
|
|
|
|
|
| |
OPTEE tests is not being upgraded due to a newer python dependency for
the build
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Lets add the basic AM62x HS-SE configuration.
- Add machine conf for AM62x HS-SE.
- The wic images will boot on AM62x GP devices by default. To boot on AM62x HS-SE, simply switch out the SYSFW image:
$ cd /mnt/sd-card/boot
$ mv tiboot3-am62x-hs-evm.bin tiboot3.bin
- Add ti-sci-firmware overrides.
- Add support to sign ATF and OPTEE.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit 98506a4a07363 ("optee-os: Update SRCREV for OP-TEE TRNG in AM62X")
Disables SW PRNG => Enabling Hardware RNG. This is breaking Suspend Resume
on AM62xx EVM variants. To fix this keep using SOFTWARE_PRNG enabled as
it was.
Cc: vibhore@ti.com
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
In addition to releasing the signed versions of the bl31.bin and
bl32.bin files, also release the unsigned original versions.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Lets add the basic AM62Q HS-SE configuration.
- Add configurations.
- Add ti-sci-firmware overrides.
- Add u-boot overrides.
- Add optee overrides.
- Add ti-rtos-firmware overrides.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Lower the log level for am62axx platform
commit 27641e1f2d7f ("optee-os: Lower log level for AM62x")
changes the log level for am62xx platforms.
This patch is to extend the same for am62axx
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reported-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
| |
optee-os was updated to 3.19 tag but the others were still outdated.
Updates other optee components to 3.19 tag
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While removing SOFTWARE_PRNG support
commit:98506a4a07363a1b57012ccfaee263f47e5b46c4,
accidently removed the changes applied
by commit:27641e1f2d7f6696fd7bbd8f24fcac20766b6234
(optee-os: Lower log level for AM62x).
Reverting those changes back
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update the SRCREV to the commit when trng support was
added in upstream OP-TEE for am62x platform to access rng.
Also, enable trng support as trng support is added now in OP-TEE
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Changes to support new j784s4-hs platform in:
1) ti-sci-fw_git: Update firmware prefix for j784s4-hs
2) atf: sign the image
4) optee: sign the image
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
Update to the latest upstream master which is 3.19.0.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
OP-TEE upstream now has support for sa3ul for j721s2 platform.
Re-enable the trng driver which was disabled earlier.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
Update the SRCREV to the commit when sa3ul support was
added in upstream OP-TEE for J784S4 platform to access rng.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
During resume from low power mode suspend OP-TEE prints some messages
on the UART. It seems this UART is not powered at this point in the
sequence breaking suspend/resume. We should track down the exact
prints and quiet them. Until we get that fix upstream, lets lower
the log level for this platform to unblock the LPM work.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
Update to the latest upstream master which is 3.18.0.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This platform is similar to the currently supported am62xx-evm, except
that we currently need new defconfigs for u-boot and new dtbs in the
filesystem.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Praneeth Bajjuri <praneeth@ti.com>
Cc: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
| |
This is needed for building the latest optee-examples.
While here switch to HTTPS for fetching from Github.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
| |
The HS-SE AM64xx machine can now be run on GP devices and built without
needing the TI_SECURE_DEV_PKG for the same. AM64xx will only be available
in the HS-FS type going forward. Make the HS-SE the default and remove
the original GP machine.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
| |
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
| |
The TRNG driver is not currently functional for these two platforms.
Disable the TRNG driver until fixed.
Reported-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update to the latest upstream master which is 3.17.
We do this to add HUK and AM64x/AM62x support.
With this we need to also switch OPTEEMACHINE for AM64x/AM62x.
To build against the latest OP-TEE the support recipes need updated also.
Move these here into meta-ti so that builds will still work when not using
meta-arago-distro.
The fix patches do not look to be needed anymore.
While here switch to git checkout with https.
NOTE: The latest OP-TEE requires SYSFW 8.04+
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Changes to support new j721s2-hs platform in:
1) ti-sci-fw_git: Update firmware prefix for j721s2-hs
2) atf: sign the image
3) u-boot: Add u-boot-spl image for combined boot image
4) optee: sign the image
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Actual systems may choose to use a different console from the default
Allow the machine configurations to describe the same.
Since the option provided is custom to TI K3, make this a k3 product
override capability.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
| |
Changes to support new j7200 hs platform in:
1) optee: sign the image
2) atf: sign the image
3) u-boot: Add u-boot-spl image for combined boot image
4) ti-sci-fw_git: Update firmware prefix for j7200 hs
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
|
|
|
|
|
|
|
| |
Changes to support new am64x hs platform in:
1) optee: sign the image
2) atf: sign the image
3) u-boot: Add u-boot-spl image for combined boot image
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Upgrade optee-os to upstream 3.12.0 on dunfell branch.
upstream optee 3.13.0 tag has the following patches.
f50962e3 ta_dev_kit.mk: make sure that libutils is linked second time
73196b58 link.mk: implement support for libnames-after-libgcc variable
36e784f6 libutils: provide empty __getauxval() implementation
Hence removing from here.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As meta-arm has this version in master, but not in dunfell, temporarily overlay
corresponding patches locally - could be removed for the next release. Need to
alter FILESEXTRAPATHS for bbappend to locate local patches.
Since meta-arm/dunfell has 3.8-specific patches in SRC_URI, let's redefine it
completely to match 3.11-specific patch list in meta-arm/master.
Last, but not least, guard all upstream recipe varibales with "ti-soc" override
to only affect platforms in meta-ti, but not any other BSPs.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
|
|
|
|
|
|
|
|
| |
It was originally residing in meta-arago due to earlier dependency on meta-optee
layer from meta-linaro. Now optee is in meta-arm and this code can move to meta-ti.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
|
|
May need to limit this to HS platforms in the future, but since there's
no SOC_FAMILY defined, listing them individually is rather painful now.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
|