| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
| |
Previously k3 mcdepends for k3r5 artifacts has been changed from do_image_wic
to support non-wic builds in other layers and do_image_complete was believed
to be sufficient. Switching k3r5 to baremetal builds has exposed another race
when some pieces come from sstate and hence requires using do_image instead.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
| |
New features added require another increase to max_leb_cnt.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
| |
Sometimes on am335x devices, no more output is printed after
"Starting kernel..." message. Modify UBOOT_EXTLINUX_KERNEL_ARGS
to enable the console before standard serial driver is probed.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
| |
The latest kernel has made the change to add vendor subdirectories into
the arch/arm/boot/dts directory. This effectively breaks the
KERNEL_DEVICETREE settings in the machine configs for 32bit platforms,
so switch them over to using the PREFIX variable. Also change the
linux-ti-next to use the PREFIX setting for KERNEL_DEVICETREE.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
This definition is only needed in the "-k3r5" multiconfig files.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
| |
The following MACHINE_FEATURES are not matched against anywhere, remove:
* kernel26
* ethernet
* mmc
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
We do not use UIO anymore, remove these files.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit 5f9be228390b ("machine: Add AM62Q HS-SE evm configuration")
has added am62xx-lp.inc which is used by am62xx-lp-evm machine.
The features listed in am62xx.inc are common between machines
am62xx-evm and am62xx-lp-evm. (Ex: MACHINE_FEATURES = "gpu")
Hence updating the necessary include file to have
common features to be enabled between these two platform variants.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Randolph Sapp <rs@ti.com>
Reviewed-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The address 0x80008000 was used in pre-K3 devices. ARM64 requires the
kernel loaded to a 2MB aligned address when not using KASLR. For FIT
set the address to 0x81000000 which gives the kernel 32MB before running
into the FDT at 0x83000000.
If you get this error someday then your kernel is too large and either it
or FDT needs relocated in memory:
ERROR: image is not a fdt - must RESET the board to recover.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
| |
New features added require another increase to max_leb_cnt.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
1) The k3-fpdlink-* dtbs were missing.
2) k3-j7200-mcspi-loopback.dts -> k3-j7200-evm-mcspi-loopback.dtso
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
Enables FIT Image signing for K3 platforms
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
| |
New features added require another increase to max_leb_cnt.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
| |
Add TI logo bitmap image as image boot file so that it gets
copied to boot partition and A53 SPL or U-boot proper
can load it and display during board bootup.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are some features that will either never be accepted into the
upstream kernel, or are not ready to be accepted. ti-extras allows for
controlling the kernel and u-boot repos, breanches, and srcrevs to gain
access to those features via the TI_EXTRAS variable in the local.conf
file.
Initial support for TI_EXTRAS=tie-jailhouse is being added by this
patch.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Acked-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
| |
New features added require an increase to max_leb_cnt.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
SR2.0 firmware binaries should be used here as SR1.0 has been descoped.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
This matches how we had the symlink for tiboot3.bin before binman.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
This matches how we had the symlink for tiboot3.bin before binman.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
The platforms with combined boot image have full names for tiboot3.bin
and to keep things consistent we can do the same here. Deploy these files.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
The platforms with combined boot image have full names for tiboot3.bin
and to keep things consistent we can do the same here. Deploy these files.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
In U-Boot the names of these files have been updated to match our
expected defaults. Remove these fixups.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
The defaults set in am62xx.inc are correct now and these can be dropped.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
Everything is the same, so just include the non-HS config to set vars.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
Everything is the same, so just include the non-HS config to set vars.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
The HS boards use the SR2 version of the silicon, ship that version
of the sysfw.itb image.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
These are not used anymore and most have been removed, these look
to be leftovers, remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
| |
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
| |
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
| |
This will no longer build after we switch away from k3-image-gen. Remove
this version until it can be rebased on the latest U-Boot with binman
support. For now switch current users of this over to u-boot-ti v2021.01.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rename the .wks to .wks.in so the EFI_PROVIDER variable is expanded
properly. We only ever set a soft recommendation for GRUB. If anyone
attempted to change that previously it was ignored (for more than just
the reason here, but that's out of my control).
Add a timeout for the bootloader menu. Currently setting it to 3
seconds.
Remove the read only flag on the rootfs. Not sure why that was there.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
| |
The FPDLink overlays are platform-agnostic, and have been renamed to
match that in the tiL6.1 kernel [1]. So use the generic k3-fpdlink
prefix to pick the overlays in the builds.
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/arch/arm64/boot/dts/ti/Makefile?id=13ef48e91#n62
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
k3_image_gen added the suffix to the sysfw binary to differentiate
between GP and HS binaries.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
uboot will now use a merged defconfig build so keep the defconfig same
for hs here
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
u-boot 2023.04 merged def configs for HS and GP EVM into one.
This patch updates config for J721S2 HS EVM for both A72 and R5.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
u-boot 2023.04 merged def configs for HS and GP EVM into one.
This patch updates config for J7200 HS EVM for both A72 and R5.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When creating the boot partition we copy all of the images for the
different board types (gp, hs-fs, hs-se), but one of those we consider
to be a default. That default is not copied with the longer name, but
rather with the tiboot3.bin name.
The issue comes when someone wants to boot with a different bin file.
They need to copy the approriate longer named .bin file to tiboot3.bin.
But then the original name of what tiboot3.bin is lost unless the use
backs it up.
This patch just additionally copies that longer named bin file so that
anyone who wants to look at the boot partiion and decide to boot for a
different board can know which file to copy to tiboot3.bin and does not
need to worry about making a backup.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are some unobvious issues with adding PVR support to Mesa
via a bbappend:
1. We need to mark mesa package as machine-specific, due to
differences in builds between SGX, Rogue and software-rendering
2. We also need to then mark mesa package as providing safe
ABIs (EGL/GLES/GBM) in order for all generic dependent packages
to not be treated as machine-specific, allowing their re-use
across different machines of the same architecture
But doing the above alters the upstream mesa package and changes
its signatures even when not building for TI platforms, which is
a Yocto Project compliance violation.
In order to resolve this issue, convert Mesa bbappend, that adds
PVR support, into its own standalone alternative provider, called
mesa-pvr and allow selecting it with PREFERRED_PROVIDER settings.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
Add in missing am69 based dtbs that were added in dunfell at the end of
the 8.6 release cycle.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
| |
Add in missing am68 based dtbs that were added in dunfell at the end of
the 8.6 release cycle.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
| |
Some of the settings for KERNEL_DEVICETREE_PREFIX were missed in the
first pass. Additionally, some new dts files that were not present in
upstream are now there and can be updated in KERNEL_DEVICETREE.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The DT name k3-am62-lp-sk.dts was adopted instead of k3-am62x-lp-sk.dts
because the community prefers avoiding the wildcard letter 'x'.[1]
Drop the letter 'x' from the strings in KERNEL_DEVICETREE_PREFIX and
KERNEL_DEVICETREE to accurately reflect the DT names.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
[1]:
https://lore.kernel.org/all/06cbcd7d-bc83-bfeb-0821-72c7caf9a5e7@linaro.org/
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add and enable Jailhouse support for TI's k3-am625-sk similarly to how other
TI platforms were added and enabled in the past by adding platform-specific
configuration variables for the root cell DTB overlay, and the Linux demo inmate
DTB, configuration, and Kernel command line settings.
Migrate the jailhouse recipe to kirkstone from dunfell.
Switch to latest upstream source tree for jailhouse. The TI Jailhouse repo has
gone stale and now upstream is really the happening place where new development
happens including for new devices such as AM62x. Hence go ahead and switch to
using the upstream repo.
Update the platform-specific config files to such that the root cell DTB overlay
gets included in the file system images.
Enable additional console on ttyS3 (usually mapped to main_uart1) and ttyS2 for
the Linux demo inmate to use.
Add patches for the Jailhouse source tree for am62xx.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Select the correct WKS file according to the MACHINE_FEATURE efi.
Right now, the sdimage-2part-efi.wks is set by default. Switch to the
sdimage-2part.wks file, if efi was removed from MACHINE_FEATURES to allow
non-efi boot methods.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For TI platforms with SGX and Rogue graphics we patch upstream Mesa with
PVR support and conditionally enable features based on virtual/gpudriver
preference. This makes Mesa package platform-specific and it contains the
corresponding PACKAGE_ARCH = "${MACHINE_ARCH}" line.
In order to get greater re-use from generic non-machine-speciofic packages
down the dependency chain, such as Wayland, Weston, Qt5 modules, etc. we
need to mark mesa recipe as still providing stable OpenGL ABIs, such as
EGL, GLES, GBM, etc. - add it to SIGGEN_EXCLUDERECIPES_ABISAFE list.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Neither of recipes nor their ABI is all that stable. OpenGL might be
slightly more stable, but that is not what these provide anymore.
The variable helps with re-use of generic packages down the dependency
tree, when they depend on a machine-specific package. SGX UM used to
provide different standard OpenGL ABIs (EGL, GLES, GBM) and hence was
listed here. Now those ABIs are provided by Mesa, so SGX is removed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
| |
The traditional order of serial consoles for K3 has ttyS2 being the
primary UART attached console. ttyS0 is also a common choice for
distros and the TI kernel may switch at some point. To prepare
we check both UARTs on all K3 devices. Move this common check
to a K3 common location.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Switch 32-bit beaglebone and beagle-x15 platforms to use linux-bb.org and
u-boot-bb.org recipes for simplicity and for additional Beagle-specific
features that are added on top of TI reference kernel, such as dynamic
management of capes and other OOBE enhancements.
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
|
| |
* Add configs for BeaglePlay Cortex-A53 and Cortex-R5F cores (am62xx SoC family)
* Uses corresponding linux-bb.org and u-boot-bb.org recipes
* U-boot for now uses a separate branch for BeaglePlay
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
|
|
|
|
|
|
| |
* 5.10.162 added 2 new DT overlays
* Remove duplicate settings that are already set in SoC config
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|