summaryrefslogtreecommitdiffstats
path: root/meta-ti-bsp/conf/machine
Commit message (Collapse)AuthorAgeFilesLines
* ti-extras: Add support for extra kernel/u-boot featuresParesh Bhagat2023-06-143-0/+7
| | | | | | | | | | | | | | | | There are some features that will either never be accepted into the upstream kernel, or are not ready to be accepted. ti-extras allows for controlling the kernel and u-boot repos, breanches, and srcrevs to gain access to those features via the TI_EXTRAS variable in the local.conf file. Initial support for TI_EXTRAS=tie-jailhouse is being added by this patch. Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Acked-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: am335x-evm and am437x-evm: bump max_leb_cntRyan Eatmon2023-06-102-2/+2
| | | | | | New features added require an increase to max_leb_cnt. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am65xx: Update GP to SR2 firmwareAndrew Davis2023-06-062-3/+3
| | | | | | | SR2.0 firmware binaries should be used here as SR1.0 has been descoped. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx-lp: Default to HS-FS instead of GPAndrew Davis2023-06-061-1/+1
| | | | | | | This matches how we had the symlink for tiboot3.bin before binman. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx: Default to HS-FS instead of GPAndrew Davis2023-06-061-1/+1
| | | | | | | This matches how we had the symlink for tiboot3.bin before binman. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e: Also deploy full named tiboot3.bin filesAndrew Davis2023-06-061-3/+6
| | | | | | | | The platforms with combined boot image have full names for tiboot3.bin and to keep things consistent we can do the same here. Deploy these files. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am65xx: Also deploy full named tiboot3.bin filesAndrew Davis2023-06-061-2/+4
| | | | | | | | The platforms with combined boot image have full names for tiboot3.bin and to keep things consistent we can do the same here. Deploy these files. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Do not override SPL_BINARY on AM65x and J721eAndrew Davis2023-06-064-8/+0
| | | | | | | | In U-Boot the names of these files have been updated to match our expected defaults. Remove these fixups. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx: Remove old SPL_BINARY and UBOOT_BINARY overridesAndrew Davis2023-06-061-4/+0
| | | | | | | The defaults set in am62xx.inc are correct now and these can be dropped. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Include the non-HS config in the HS configAndrew Davis2023-06-061-23/+1
| | | | | | | Everything is the same, so just include the non-HS config to set vars. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Include the non-HS config in the HS configAndrew Davis2023-06-061-16/+1
| | | | | | | Everything is the same, so just include the non-HS config to set vars. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am65xx: Deploy SR2 version of SYSFWAndrew Davis2023-06-062-2/+2
| | | | | | | | The HS boards use the SR2 version of the silicon, ship that version of the sysfw.itb image. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Remove leftover k3r5 SOC_FAMILY namesAndrew Davis2023-06-063-3/+0
| | | | | | | | These are not used anymore and most have been removed, these look to be leftovers, remove them. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Remove all leftover config filesAndrew Davis2023-06-0617-290/+0
| | | | | Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Switch all the machines over to U-Boot binmanAndrew Davis2023-06-0626-103/+59
| | | | | Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-bb.org: Remove this recipeAndrew Davis2023-06-066-14/+0
| | | | | | | | | This will no longer build after we switch away from k3-image-gen. Remove this version until it can be rebased on the latest U-Boot with binman support. For now switch current users of this over to u-boot-ti v2021.01. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: sdimage-2part-efi: rename to load variablesRandolph Sapp2023-05-171-1/+1
| | | | | | | | | | | | | | | Rename the .wks to .wks.in so the EFI_PROVIDER variable is expanded properly. We only ever set a soft recommendation for GRUB. If anyone attempted to change that previously it was ignored (for more than just the reason here, but that's out of my control). Add a timeout for the bootloader menu. Currently setting it to 3 seconds. Remove the read only flag on the rootfs. Not sure why that was there. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Use generic fpdlink prefixJai Luthra2023-05-171-1/+1
| | | | | | | | | | | The FPDLink overlays are platform-agnostic, and have been renamed to match that in the tiL6.1 kernel [1]. So use the generic k3-fpdlink prefix to pick the overlays in the builds. [1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/arch/arm64/boot/dts/ti/Makefile?id=13ef48e91#n62 Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Add SYSFW_SUFFIX to SYSFW_BINARY to match k3-image-genRyan Eatmon2023-05-153-2/+6
| | | | | | | k3_image_gen added the suffix to the sysfw binary to differentiate between GP and HS binaries. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* j721e-hs-evm: Merge j721e defconfigsManorit Chawdhry2023-05-152-2/+2
| | | | | | | | uboot will now use a merged defconfig build so keep the defconfig same for hs here Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: conf: machine: j721s2: Update def configUdit Kumar2023-05-152-2/+2
| | | | | | | | u-boot 2023.04 merged def configs for HS and GP EVM into one. This patch updates config for J721S2 HS EVM for both A72 and R5. Signed-off-by: Udit Kumar <u-kumar1@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: conf: machine: j7200: Update def configUdit Kumar2023-05-152-2/+2
| | | | | | | | u-boot 2023.04 merged def configs for HS and GP EVM into one. This patch updates config for J7200 HS EVM for both A72 and R5. Signed-off-by: Udit Kumar <u-kumar1@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Add extra tiboot3.bin version that matches defaultRyan Eatmon2023-05-115-0/+5
| | | | | | | | | | | | | | | | | | | When creating the boot partition we copy all of the images for the different board types (gp, hs-fs, hs-se), but one of those we consider to be a default. That default is not copied with the longer name, but rather with the tiboot3.bin name. The issue comes when someone wants to boot with a different bin file. They need to copy the approriate longer named .bin file to tiboot3.bin. But then the original name of what tiboot3.bin is lost unless the use backs it up. This patch just additionally copies that longer named bin file so that anyone who wants to look at the boot partiion and decide to boot for a different board can know which file to copy to tiboot3.bin and does not need to worry about making a backup. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* mesa-pvr: convert bbappend into standalone alternative providerDenys Dmytriyenko2023-05-1110-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | There are some unobvious issues with adding PVR support to Mesa via a bbappend: 1. We need to mark mesa package as machine-specific, due to differences in builds between SGX, Rogue and software-rendering 2. We also need to then mark mesa package as providing safe ABIs (EGL/GLES/GBM) in order for all generic dependent packages to not be treated as machine-specific, allowing their re-use across different machines of the same architecture But doing the above alters the upstream mesa package and changes its signatures even when not building for TI platforms, which is a Yocto Project compliance violation. In order to resolve this issue, convert Mesa bbappend, that adds PVR support, into its own standalone alternative provider, called mesa-pvr and allow selecting it with PREFERRED_PROVIDER settings. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add AM69 SK dtbs to KERNEL_DEVICETREE_PREFIXRyan Eatmon2023-05-092-0/+2
| | | | | | | Add in missing am69 based dtbs that were added in dunfell at the end of the 8.6 release cycle. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add AM68 SK dtbs to KERNEL_DEVICETREE_PREFIXRyan Eatmon2023-05-092-0/+2
| | | | | | | Add in missing am68 based dtbs that were added in dunfell at the end of the 8.6 release cycle. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: Sync KERNEL_DEVICETREE(_PREFIX) with upstreamRyan Eatmon2023-05-093-2/+13
| | | | | | | | Some of the settings for KERNEL_DEVICETREE_PREFIX were missed in the first pass. Additionally, some new dts files that were not present in upstream are now there and can be updated in KERNEL_DEVICETREE. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: conf: am62xx-lp-evm: Fix DT and DT prefixesAradhya Bhatia2023-05-081-2/+2
| | | | | | | | | | | | | | | The DT name k3-am62-lp-sk.dts was adopted instead of k3-am62x-lp-sk.dts because the community prefers avoiding the wildcard letter 'x'.[1] Drop the letter 'x' from the strings in KERNEL_DEVICETREE_PREFIX and KERNEL_DEVICETREE to accurately reflect the DT names. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> [1]: https://lore.kernel.org/all/06cbcd7d-bc83-bfeb-0821-72c7caf9a5e7@linaro.org/ Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-ti: Add recipe and patches for jailhouse support for am62xxParesh Bhagat2023-05-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add and enable Jailhouse support for TI's k3-am625-sk similarly to how other TI platforms were added and enabled in the past by adding platform-specific configuration variables for the root cell DTB overlay, and the Linux demo inmate DTB, configuration, and Kernel command line settings. Migrate the jailhouse recipe to kirkstone from dunfell. Switch to latest upstream source tree for jailhouse. The TI Jailhouse repo has gone stale and now upstream is really the happening place where new development happens including for new devices such as AM62x. Hence go ahead and switch to using the upstream repo. Update the platform-specific config files to such that the root cell DTB overlay gets included in the file system images. Enable additional console on ttyS3 (usually mapped to main_uart1) and ttyS2 for the Linux demo inmate to use. Add patches for the Jailhouse source tree for am62xx. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: include: k3: Select correct WKS fileDaniel Schultz2023-05-081-1/+2
| | | | | | | | | | | Select the correct WKS file according to the MACHINE_FEATURE efi. Right now, the sdimage-2part-efi.wks is set by default. Switch to the sdimage-2part.wks file, if efi was removed from MACHINE_FEATURES to allow non-efi boot methods. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Set common default SERIAL_CONSOLES for all K3Andrew Davis2023-04-1813-33/+3
| | | | | | | | | | | The traditional order of serial consoles for K3 has ttyS2 being the primary UART attached console. ttyS0 is also a common choice for distros and the TI kernel may switch at some point. To prepare we check both UARTs on all K3 devices. Move this common check to a K3 common location. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: switch beaglebone and beagle-x15 to bb.org kernel/u-bootDenys Dmytriyenko2023-04-102-0/+8
| | | | | | | | | | | Switch 32-bit beaglebone and beagle-x15 platforms to use linux-bb.org and u-boot-bb.org recipes for simplicity and for additional Beagle-specific features that are added on top of TI reference kernel, such as dynamic management of capes and other OOBE enhancements. Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: beagleplay: add new BeaglePlay platformDenys Dmytriyenko2023-04-102-0/+84
| | | | | | | | | | * Add configs for BeaglePlay Cortex-A53 and Cortex-R5F cores (am62xx SoC family) * Uses corresponding linux-bb.org and u-boot-bb.org recipes * U-boot for now uses a separate branch for BeaglePlay Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* beaglebone-ai64: add new DTBOs, remove duplicate settingsDenys Dmytriyenko2023-04-101-4/+2
| | | | | | | | | * 5.10.162 added 2 new DT overlays * Remove duplicate settings that are already set in SoC config Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: change from do_image_wic/tar to do_image_completeRyan Eatmon2023-04-0511-21/+21
| | | | | | | | | When trying to support OpenBMC, we found that our use of do_image_wic and do_image_tar for adding depends and mcdepends was too limiting. Moving to do_image_complete is a higher level in the tree that means for any image type the dependencies will be correct. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-*: Add filtering for which dtb/dtbo to includeRyan Eatmon2023-03-3116-151/+92
| | | | | | | | | | | | | | | | | | | We often carry more dtbs/dtbos in our kernel than we have upstreamed. The inclusion of all of the dtb/dtbo in the KERNEL_DEVICETREE has become problematic as we start testing the linux-next and 6.1 as part of our LTS migration. To address this issue we are adding in two step method for managing the KERNEL_DEVICETREE. Going forward we will only accept dtb/dtbo in KERNEL_DEVICETREE if it is available in upstream. This way we ensure that the variable is more accurate for whichever kernel you might be looking at. We have also added a new variable KERNEL_DEVICETREE_PREFIX which our kernel recipes will use to auto set KERNEL_DEVICETREE based on what files are in the kernel and not a fixed list in the conf files. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add overlay for second CPSW3G PortSiddharth Vadapalli2023-03-201-0/+1
| | | | | | | | | | | | | The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A-SK board supports RGMII mode. Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the Add-On Ethernet Card. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add MCSPI loopback overlay for J784S4Vaishnav Achath2023-03-201-0/+1
| | | | | | | | | | | | Add the MCSPI loopback overlay file for J784S4 EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add MCSPI loopback overlay for J721S2Vaishnav Achath2023-03-201-0/+1
| | | | | | | | | | | | Add the MCSPI loopback overlay file for J721S2 EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Add MCSPI loopback overlay for J721EVaishnav Achath2023-03-201-0/+1
| | | | | | | | | | | | Add the MCSPI loopback overlay file for J721E EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add uarts overlay for J784S4Bhavya Kapoor2023-03-201-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J784S4 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add uarts overlay for J721S2Bhavya Kapoor2023-03-201-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J721S2 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Add uarts overlay for J721EBhavya Kapoor2023-03-201-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J721E SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7200-evm: Add uarts overlay for J7200Bhavya Kapoor2023-03-201-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J7200 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add camera overlays for J784S4 EVMVaishnav Achath2023-03-201-0/+2
| | | | | | | | | | | | Add the following overlay files on J784S4 EVM: 1. Fusion board (For FPDLink-III cameras) 2. OV5640 camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add camera overlays for J721S2 EVMVaishnav Achath2023-03-201-0/+2
| | | | | | | | | | | | Add the following overlay files on J721S2 EVM: 1. Fusion board (For FPDLink-III cameras) 2. OV5640 camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Add camera overlays for J721E EVMVaishnav Achath2023-03-201-0/+21
| | | | | | | | | | | | | Add the following overlay files on J721E EVM: 1. Fusion board (For FPDLink-III cameras) 2. IMX390 FPDLink camera module 3. IMX219 RPi-compatible camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7200-evm: Add MCSPI loopback overlay for J7200Vaishnav Achath2023-03-201-0/+1
| | | | | | | | | | Add the MCSPI loopback overlay file for J7200 EVM which helps users to enable MCU-MAIN MCSPI loopback applications. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add ehrpwm overlay for am69-skDasnavis Sabiya2023-03-201-0/+1
| | | | | | | | | | The AM69 SK has PWM output pins connected to its RPi header. Add overlay file to enable PWM pins. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx-lp-evm: Add OLDI Panel overlayAradhya Bhatia2023-03-201-0/+1
| | | | | | | | | | Add the Microtips OLDI Panel DT overlay for AM62 LP SK. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 22:02:51 +0000