summaryrefslogtreecommitdiffstats
path: root/conf
Commit message (Collapse)AuthorAgeFilesLines
* conf: machine: am62axx: Add overlay for second CPSW3G PortSiddharth Vadapalli2023-02-281-0/+1
| | | | | | | | | | | The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A-SK board supports RGMII mode. Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the Add-On Ethernet Card. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add MCSPI loopback overlay for J784S4Vaishnav Achath2023-02-271-0/+1
| | | | | | | | | | Add the MCSPI loopback overlay file for J784S4 EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add MCSPI loopback overlay for J721S2Vaishnav Achath2023-02-271-0/+1
| | | | | | | | | | Add the MCSPI loopback overlay file for J721S2 EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7-evm: Add MCSPI loopback overlay for J721EVaishnav Achath2023-02-271-0/+1
| | | | | | | | | | Add the MCSPI loopback overlay file for J721E EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add uarts overlay for J784S4Bhavya Kapoor2023-02-271-0/+1
| | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J784S4 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add uarts overlay for J721S2Bhavya Kapoor2023-02-271-0/+1
| | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J721S2 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7-evm: Add uarts overlay for J721EBhavya Kapoor2023-02-271-0/+1
| | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J721E SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7200-evm: Add uarts overlay for J7200Bhavya Kapoor2023-02-271-0/+1
| | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J7200 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add camera overlays for J784S4 EVMVaishnav Achath2023-02-151-0/+2
| | | | | | | | | | Add the following overlay files on J784S4 EVM: 1. Fusion board (For FPDLink-III cameras) 2. OV5640 camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add camera overlays for J721S2 EVMVaishnav Achath2023-02-151-0/+2
| | | | | | | | | | Add the following overlay files on J721S2 EVM: 1. Fusion board (For FPDLink-III cameras) 2. OV5640 camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7-evm: Add camera overlays for J721E EVMVaishnav Achath2023-02-151-0/+21
| | | | | | | | | | | Add the following overlay files on J721E EVM: 1. Fusion board (For FPDLink-III cameras) 2. IMX390 FPDLink camera module 3. IMX219 RPi-compatible camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7200-evm: Add MCSPI loopback overlay for J7200Vaishnav Achath2023-02-151-0/+1
| | | | | | | | Add the MCSPI loopback overlay file for J7200 EVM which helps users to enable MCU-MAIN MCSPI loopback applications. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add ehrpwm overlay for am69-skDasnavis Sabiya2023-02-151-0/+1
| | | | | | | | The AM69 SK has PWM output pins connected to its RPi header. Add overlay file to enable PWM pins. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add support for J784S4 HS-FSDasnavis2023-02-154-4/+64
| | | | | | | | | | | Add the basic J784S4 HS-FS configuration. * Add configurations to support both HS-FS and GP keeping GP as default. * Add ti-sci-firmware overrides for HS-FS. * Remove evm conf file inclusion in hs-evm conf. * Add j784s4 hs-evm specific config to hs-evm conf. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62axx-evm: Add AM62A HS-FS evm configurationSai Sree Kartheek Adivi2023-02-146-13/+75
| | | | | | | | | | | Lets add the basic AM62A configuration - Add machine conf for AM62A. - The wic images will boot on AM62A HS-FS devices by default. The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively. - Add ti-sci-firmware overrides. - Sign ATF, OPTEE and RTOS Firmware. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add support for J721S2 HS-FSSinthu Raja2023-02-146-3/+68
| | | | | | | | | | | | | Add the basic J721S2 HS-FS configuration. - Add configurations to support both HS-FS and GP keeping GP as default. - Add ti-sci-firmware overrides for HS-FS. - Remove evm conf file inclusion in hs-evm conf. - Add j721s2 hs-evm specific config to hs-evm conf. Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-lp-evm: Add AM62x LP HS-FS evm configurationChirag Shilwant2023-02-133-1/+28
| | | | | | | | | | Lets add the basic AM62x LP HS-FS configuration - Add machine conf for AM62x LP HS-FS. - The wic images will boot on AM62x LP HS-FS devices by default. The sysfw image for HS-SE will be packaged in the wic image as tiboot3-am62x-hs-evm.bin. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-evm: Add AM62x HS-FS evm configurationChirag Shilwant2023-02-134-4/+32
| | | | | | | | | | Lets add the basic AM62x HS-FS configuration - Add machine conf for AM62x HS-FS. - The wic images will boot on AM62x HS-FS devices by default. The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62x-gp-evm.bin and tiboot3-am62x-hs-evm.bin respectively. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx-lp-evm: Add OLDI Panel overlayAradhya Bhatia2023-02-101-0/+1
| | | | | | | | Add the Microtips OLDI Panel DT overlay for AM62 LP SK. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: k3: Define RD, DTB and DTBO load address for FIT imageSinthu Raja2023-02-105-32/+5
| | | | | | | | | | | | | | | K3 platforms include the FIT image-based kernel by default. The bootloader loads the kernel and DTB from the FIT image. The DTB/DTBOs are added to the FIT image but the load address is not included in the image section of each DTB/DTBO. This load address is determined by the LOADADDRESS macros in the kernel-fitmage class. Hence, define the RD/DTB/DTBOs LOADADDRESS and OFFSET macros in the K3 common include, and remove those macros defined in the K3 board specific config files. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add ehrpwm overlay for am68-skSinthu Raja2023-02-101-0/+1
| | | | | | | | The AM68 SK has PWM output pins connected to its RPi headers. Add overlay file to enable PWM pins. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add FPDLink overlays for AM69 SKDasnavis Sabiya2023-02-061-0/+17
| | | | | | | | | | Add the overlay files for AM69 SK: 1. Fusion board (For FPDLink-III cameras). 2. IMX390 FPDLink-III camera module that includes both the CM and RCM type of modules. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62x HS-SE evm configurationChirag Shilwant2023-01-304-2/+37
| | | | | | | | | | | | | | Lets add the basic AM62x HS-SE configuration. - Add machine conf for AM62x HS-SE. - The wic images will boot on AM62x GP devices by default. To boot on AM62x HS-SE, simply switch out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am62x-hs-evm.bin tiboot3.bin - Add ti-sci-firmware overrides. - Add support to sign ATF and OPTEE. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add FPDLink overlays for am68-skSinthu Raja2023-01-271-0/+17
| | | | | | | | | | | Add the overlay files, over AM68 SK, for the following: 1. Fusion board (For FPDLink-III cameras). 2. IMX390 FPDLink-III camera module which includes both the CM and RCM type of modules. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Fix DTB overlay extension for OV5640Sinthu Raja2023-01-271-1/+1
| | | | | | | | | The extension for OV5640 overlay is incorrect. Therefore, update the correct extension to build the overlay with .dtbo Fixes: f67e9805 ("conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREE") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add AM69 SK specific dtb and dtbo to KERNEL_DEVICETREEDasnavis Sabiya2023-01-271-0/+4
| | | | | | | | | | | | | | | | | AM69 Starter Kit is a single board designed based on TI's AM69 SOC providing advanced system integration in automotive ADAS applications, autonomous mobile robot and edge AI applications. Add support for the same to include the board dtb file into the root filesystem. Add DT overlays support for the following features on AM69 SK: * Add DTBO entry to support OV5640 camera * Add DTBO entry to support RPi(IMX219) camera * Add DTBO entry for the DDR memory carveout. [1]:https://www.ti.com/lit/zip/spruj52 Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add overlays for IMX390 camerasJai Luthra2023-01-111-0/+8
| | | | | | | | | | | | IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally targeted for J7-based devices, but AM62A can re-use the existing overlays. Both the CM and RCM type of modules are supported. As AM62A only has one CSI-RX port, we only use 4 out of the 8 total FPDLink ports on the fusion board. Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREESinthu Raja2023-01-111-0/+4
| | | | | | | | | | | | | | AM68 Starter Kit is a low cost, small form factor board designed for TI's AM68/J721S2 SoC[1] which is optimized to provide best in class performance for industrial applications. Add DTB entry for the same. AM68 SK features camera support with MIPI(OV5640) and RPi(IMX219) connectors. Add DTBO for the same. Also, add DTBO entry for the DDR memory carveout. [1]:http://www.ti.com/lit/zip/spruj28 Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62Q HS-SE evm configurationChirag Shilwant2023-01-065-3/+50
| | | | | | | | | | | | Lets add the basic AM62Q HS-SE configuration. - Add configurations. - Add ti-sci-firmware overrides. - Add u-boot overrides. - Add optee overrides. - Add ti-rtos-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add camera overlays for AM62A SKJai Luthra2023-01-051-0/+6
| | | | | | | | | | | Add the following overlay files on AM62A SK: 1. Fusion board (For FPDLink-III cameras) 2. OV2312 FPDLink camera module 3. IMX219 RPi-compatible camera module Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* k3: also inherit kernel-fitimage class for FIT image generationDenys Dmytriyenko2023-01-051-0/+1
| | | | | | | | | | | In order to support fitImage image type, kernel-fitimage class is needed. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> (cherry picked from kirkstone/master commit 48b22e8266ba0358b5b7319faa75ad731a350db7) Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Tested-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add am62axx evm configurationParesh Bhagat2022-12-083-0/+38
| | | | | | | | | | | | | Lets add the basic AM62Axx-evm configuration. - Add configurations. - Add firmware overrides. - Add u-boot overrides. - Add tifs-lpm-stub. - Add cnm-wave-fw. Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com> Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx: Add missing overlays for AM625 SKAradhya Bhatia2022-12-051-0/+5
| | | | | | | | | | | | | Add the overlay files, over AM625 SK, for the following: 1. Technexion OV5640 Camera 2. Enhanced Capture (ECAP) 3. HDMI Audio Output 4. MCAN Transceiver 5. Microtips OLDI Panel Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: Remove vmlinux.gz from KERNEL_IMAGETYPESRyan Eatmon2022-12-051-1/+1
| | | | | | | | | With a recent patch to the TI kernel that includes debug symbols, the vmlinux.gz file grew in size that impacted the testing. This file is not needed to be in the final image so remove it from the list. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: omap-a15: Fix parsing when KERNEL_DEVICETREE is not setZachary Booth2022-12-031-1/+1
| | | | | | | | | Correctly handle parsing when KERNEL_DEVICETREE is not set. Signed-off-by: Zachary Booth <zachary.booth@garmin.com> Signed-off-by: Joshua Watt <Joshua.Watt@garmin.com> Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Add J784S4 hs platformManorit Chawdhry2022-11-152-0/+22
| | | | | | | | Machine conf for J784S4 HS platform. Used J721S2 hs as reference. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add OP-TEE flavourJayesh Choudhary2022-10-101-0/+1
| | | | | | | | | Change the OP-TEE flavour from default k3-j721e to k3-j784s4 as sa3ul support for j784s4 is upstreamed in OP-TEE and we can use the same settings in j721s2 to access TRNG. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add OP-TEE flavourJayesh Choudhary2022-10-101-0/+1
| | | | | | | | | Add the new OP-TEE flavour for J784S4 instead of default k3-j721e. The TI-SCI ID for MCU domain sa2ul/sa3ul are not the same for J721E and J784S4. So a new flavour is added in upstream OP-TEE. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* j721s2 and j784s4: Correct serial console deviceRyan Eatmon2022-10-102-2/+2
| | | | | | | | | | | Serial console in J721S2/J784S4 EVM config was set to ttyS10. It should be ttyS2. This caused sysv based systems (eg, tiny) to apparently hang because of no login prompt. This didn't show up as a problem on systemd systems (eg, default) because systemd will automatically setup a serial tty with the console option passed in on the kernel command line (using console=...), which U-Boot correctly passes in as ttyS2 for J721S2/J784S4. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add j784s4-evm configuration.Ryan Eatmon2022-10-042-0/+35
| | | | | | | | | | | | | Adding support for j784s4-evm: - Add configurations. - Add firmware. - Add u-boot. - Add gpu support. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx: Move multi-config targets into base SoC includeAndrew Davis2022-09-082-12/+13
| | | | | | | | | The supported device types depends on the SoC, not on any specific board or EVM. Any board can be populated with any of the 3 supported AM64x types. Move these into the AM64x common include. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx-evm: Switch to SR2.0 HS-FS build by defaultAndrew Davis2022-09-087-19/+48
| | | | | | | | | | | | | AM64x devices will only be available as SR2.0 HS-FS. Set this as the default type provided by the SDK. To allow SR2.0 HS-SE to continue to boot, like we did with GP, we add an extra machine to build SR2.0 HS-SE SYSFW. To use on SR2.0 HS-SE boards simply switch out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am64x_sr2-hs-evm.bin tiboot3.bin Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: add am62xx-lp-evm configurationAnand Gadiyar2022-08-292-0/+27
| | | | | | | | | | | | | This platform is similar to the currently supported am62xx-evm, except that we currently need new defconfigs for u-boot and new dtbs in the filesystem. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Hari Nagalla <hnagalla@ti.com> Cc: Andrew Davis <afd@ti.com> Cc: Praneeth Bajjuri <praneeth@ti.com> Cc: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx-evm: Update default HS namesAndrew Davis2022-08-281-4/+0
| | | | | | | | | In the latest U-Boot the HS images for AM64x have been renamed to the default names, and the GP have been changed to *_unsigned. Remove the overrides to pull the now default HS images. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx-evm: Make HS-SE the defaultAndrew Davis2022-08-268-51/+31
| | | | | | | | | | The HS-SE AM64xx machine can now be run on GP devices and built without needing the TI_SECURE_DEV_PKG for the same. AM64xx will only be available in the HS-FS type going forward. Make the HS-SE the default and remove the original GP machine. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: k3: Add fitImage to the default kernel image typesAndrew Davis2022-08-081-1/+1
| | | | | | | | | FIT Image based kernels are valid for all K3 devices, not just HS, deploy this kernel image type by default so it doesn't have to be appended on a per-device-type basis. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx-hs-evm: Add extra machine to build GP SYSFWAndrew Davis2022-08-063-0/+25
| | | | | | | | | | | Use multiconfig to generate a GP SYSFW image. This allows the HS SDK to be used on GP boards by simply switching out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am64x-gp-evm.bin tiboot3.bin Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Update to the latest ti-u-boot-2021.01Andrew Davis2022-08-063-2/+6
| | | | | | | | | | | | Update to the latest commit of ti-u-boot-2021.01. As part of this U-Boot update the non-HS AM64x-evm defconfig was removed. This is okay as building this defconfig without defining TI_SECURE_DEV_PKG will still result in usable binaries for the non-HS devices. Use the HS defconfig for both the HS and non-HS machines. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Move K3 TI_SECURE_DEV_PKG definition to common includeAndrew Davis2022-08-0612-20/+4
| | | | | | | | | The K3 TI_SECURE_DEV_PKG is the same for all devices, move this out of each machine file and into the common K3 includes. This doesn't have any effect on the GP machines as they make no use of it. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Make combined R5 boot the defaultAndrew Davis2022-08-061-0/+1
| | | | | | | | | | | | Going forward, the combined tiboot3.bin is going to be the standard. Only AM65x and J721e will still use the split boot. Set DEPENDS and EXTRA_OEMAKE for combined boot and override only for the two split boot platforms. This makes it easier to add new platforms and simplifies deployment logic. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-06-26 14:17:16 +0000