1 files changed, 34 insertions, 0 deletions

diff --git a/recipes-bsp/u-boot/u-boot/0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch b/recipes-bsp/u-boot/u-boot/0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch
new file mode 100644
index 00000000..b690a6c8
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch
@@ -0,0 +1,34 @@
+From 0ddd7f44f04b47d16d33a6b232b288ebdb1c9992 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 16 Feb 2010 10:00:45 -0800
+Subject: [PATCH 09/37] OMAP3: Overo: enable input on MMC1_CLK and MMC3_CLK pinmux
+
+---
+ board/overo/overo.h |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/board/overo/overo.h b/board/overo/overo.h
+index e120e09..ff936dd 100644
+--- a/board/overo/overo.h
++++ b/board/overo/overo.h
+@@ -200,7 +200,7 @@ const omap3_sysinfo sysinfo = {
+        MUX_VAL(CP(MCBSP2_DR),          (IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
+        MUX_VAL(CP(MCBSP2_DX),          (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
+  /*Expansion card */\
+-       MUX_VAL(CP(MMC1_CLK),           (IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
++       MUX_VAL(CP(MMC1_CLK),           (IEN  | PTU | EN  | M0)) /*MMC1_CLK*/\
+        MUX_VAL(CP(MMC1_CMD),           (IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
+        MUX_VAL(CP(MMC1_DAT0),          (IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
+        MUX_VAL(CP(MMC1_DAT1),          (IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
+@@ -301,7 +301,7 @@ const omap3_sysinfo sysinfo = {
+        MUX_VAL(CP(SYS_OFF_MODE),       (IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
+        MUX_VAL(CP(SYS_CLKOUT1),        (IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
+        MUX_VAL(CP(SYS_CLKOUT2),        (IEN  | PTU | EN  | M4)) /*GPIO_186*/\
+-       MUX_VAL(CP(ETK_CLK_ES2),        (IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
++       MUX_VAL(CP(ETK_CLK_ES2),        (IEN  | PTU | EN  | M2)) /*MMC3_CLK*/\
+        MUX_VAL(CP(ETK_CTL_ES2),        (IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
+        MUX_VAL(CP(ETK_D0_ES2),         (IEN  | PTU | EN  | M4)) /*GPIO_14*/\
+        MUX_VAL(CP(ETK_D1_ES2),         (IEN  | PTD | EN  | M4)) /*GPIO_15 - X_GATE*/\
+-- 
+1.6.6.1
+