ti-uio: rebase pru-uio device tree files

* Update mdio register entries to use the full address
* For AM571x, remove the entries which are available after using DT overlay

Signed-off-by: Hongmei Gou <h-gou@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

5 files changed, 14 insertions, 26 deletions

diff --git a/recipes-kernel/linux/files/dra7xx/am571x-pru-uio.dtsi b/recipes-kernel/linux/files/dra7xx/am571x-pru-uio.dtsi
index 4228827e..8ca11c78 100644
--- a/recipes-kernel/linux/files/dra7xx/am571x-pru-uio.dtsi
+++ b/recipes-kernel/linux/files/dra7xx/am571x-pru-uio.dtsi
@@ -1,14 +1,14 @@
 &pruss_soc_bus1 {
-                uio_pruss1_mdio {
+                uio_pruss1_mdio: uio_mdio@4b232400 {
                         status = "okay";
 
                         compatible = "ti,davinci_mdio";
+                        reg = <0x4b232400 0x90>;
                         #address-cells = <1>;
                         #size-cells = <0>;
                         clocks = <&dpll_gmac_h13x2_ck>;
                         clock-names = "fck";
                         bus_freq = <1000000>;
-                        reg = <0x32400 0x90>;
 
                         reset-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
                         reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
@@ -112,14 +112,14 @@
 };
 
 &pruss_soc_bus2 {
-                uio_pruss2_mdio {
+                uio_pruss2_mdio: uio_mdio@4b2b2400 {
                         compatible = "ti,davinci_mdio";
+                        reg = <0x4b2b2400 0x90>;
                         #address-cells = <1>;
                         #size-cells = <0>;
                         clocks = <&dpll_gmac_h13x2_ck>;
                         clock-names = "fck";
                         bus_freq = <1000000>;
-                        reg = <0x32400 0x90>;
                         status = "okay";
 
                         reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
@@ -223,18 +223,6 @@
                 };
         };
 
-&pruss1_eth {
-        status = "disabled";
-};
-
-&pruss1_emac0 {
-        status = "disabled";
-};
-
-&pruss1_emac1 {
-        status = "disabled";
-};
-
 &pruss2_emac0 {
         status = "disabled";
 };
diff --git a/recipes-kernel/linux/files/dra7xx/am57xx-pru-uio.dtsi b/recipes-kernel/linux/files/dra7xx/am57xx-pru-uio.dtsi
index 17b3f963..4cc57118 100644
--- a/recipes-kernel/linux/files/dra7xx/am57xx-pru-uio.dtsi
+++ b/recipes-kernel/linux/files/dra7xx/am57xx-pru-uio.dtsi
@@ -106,14 +106,14 @@
 };
 
 &pruss_soc_bus2 {
-                uio_pruss2_mdio: uio_pruss2_mdio {
+                uio_pruss2_mdio: uio_mdio@4b2b2400 {
                     compatible = "ti,davinci_mdio";
+                    reg = <0x4b2b2400 0x90>;
                     #address-cells = <1>;
                     #size-cells = <0>;
                     clocks = <&dpll_gmac_h13x2_ck>;
                     clock-names = "fck";
                     bus_freq = <1000000>;
-                    reg = <0x32400 0x90>;
                     status = "disabled";
                 };
 
diff --git a/recipes-kernel/linux/files/k2g/keystone-k2g-pru-uio.dtsi b/recipes-kernel/linux/files/k2g/keystone-k2g-pru-uio.dtsi
index e4baca50..49894e0d 100644
--- a/recipes-kernel/linux/files/k2g/keystone-k2g-pru-uio.dtsi
+++ b/recipes-kernel/linux/files/k2g/keystone-k2g-pru-uio.dtsi
@@ -1,7 +1,7 @@
 &pruss_soc_bus0 {
-                uio_pruss1_mdio: uio_mdio@32400 {
+                uio_pruss1_mdio: uio_mdio@20ab2400 {
                         compatible = "ti,davinci_mdio";
-                        reg = <0x32400 0x90>;
+                        reg = <0x20ab2400 0x90>;
                         clocks = <&k2g_clks 0x0014 1>;
                         clock-names = "fck";
                         #address-cells = <1>;
@@ -95,9 +95,9 @@
 };
 
 &pruss_soc_bus1 {
-                uio_pruss2_mdio: uio_mdio@32400 {
+                uio_pruss2_mdio: uio_mdio@20af2400 {
                         compatible = "ti,davinci_mdio";
-                        reg = <0x32400 0x90>;
+                        reg = <0x20af2400 0x90>;
                         clocks = <&k2g_clks 0x0015 1>;
                         clock-names = "fck";
                         #address-cells = <1>;
diff --git a/recipes-kernel/linux/files/ti33x/am335x-pru-uio.dtsi b/recipes-kernel/linux/files/ti33x/am335x-pru-uio.dtsi
index 714b1d78..93a40ab5 100644
--- a/recipes-kernel/linux/files/ti33x/am335x-pru-uio.dtsi
+++ b/recipes-kernel/linux/files/ti33x/am335x-pru-uio.dtsi
@@ -1,7 +1,7 @@
 &pruss_soc_bus {
-                uio_pruss_mdio: uio_pruss_mdio@32400 {
+                uio_pruss_mdio: uio_mdio@4a332400 {
                         compatible = "ti,davinci_mdio";
-                        reg = <0x32400 0x90>;
+                        reg = <0x4a332400 0x90>;
                         clocks = <&dpll_core_m4_ck>;
                         clock-names = "fck";
                         bus_freq = <1000000>;
diff --git a/recipes-kernel/linux/files/ti43x/am437x-pru-uio.dtsi b/recipes-kernel/linux/files/ti43x/am437x-pru-uio.dtsi
index 81c16e34..80993c4b 100644
--- a/recipes-kernel/linux/files/ti43x/am437x-pru-uio.dtsi
+++ b/recipes-kernel/linux/files/ti43x/am437x-pru-uio.dtsi
@@ -1,7 +1,7 @@
 &pruss_soc_bus {
-                uio_pruss2_mdio: uio_mdio@32400 {
+                uio_pruss2_mdio: uio_mdio@54432400 {
                         compatible = "ti,davinci_mdio";
-                        reg = <0x32400 0x90>;
+                        reg = <0x54432400 0x90>;
                         clocks = <&dpll_core_m4_ck>;
                         clock-names = "fck";
                         bus_freq = <1000000>;