From 9b37ba538afa88217443d1b82a616a367607986f Mon Sep 17 00:00:00 2001 From: Markus Volk Date: Thu, 18 May 2023 07:40:15 +0200 Subject: pipewire: update 0.3.70 -> 0.3.71 This is a bugfix release that is API and ABI compatible with previous 0.3.x releases. - A new zero-latency jackdbus bridge was added. This works similar to what PulseAudio has to offer and creates a sink/source when jackdbus is started. It is however much more efficient and runs the complete PipeWire graph as a synchronous JACK client with no added latency. - Many performance improvements. Activation of remote nodes is more efficient, fewer eventfds are required on the clients, less callback overhead in performence critical paths and an optimized poll function was added. This was mainly driven by the jackdbus module to get the lowest possible overhead when running the graph. - The JACK notify callback implementation was reworked to emulate better what JACK does, improving compatibility with ardour7 and the JACK stress test. - More work on BAP devices. Device latency is now passed on to applications also for multi-device headsets, and channel allocation is handled better. - Many more improvements and bugfixes. - Remove the hardcoded limit on io_areas. This is used to link nodes together and exchange buffers, it was limited to 2048 but now dynamically scales based on requirements. - Rate and quantum changes are now applied correctly in more cases. (#3159) - Updates to client-node to more efficiently process the driver. - The profiler information was improved to be more accurate. It should now work better for remote drivers. - Some potential memory map errors were fixed in the protocol because in some case with large messages, some fds were closed too soon. - pw-filter now implements the pw_filter_set_active() method. - A potential out-of-buffers case was fixed in capture pw-streams where buffers were not moved to the recycle queue when the node suspended. - Nodes are now always woken up with the eventfd. Previously there were some optimiztions in the server to directly call into the node process function but that optimization is not necessary. Without this optimization it is now possible to run nodes in different threads. - pw-stream trigger is now implemented correctly in all cases. - Remote nodes now use one eventfd less because they get triggered with the node eventfd directly. - Monitor ports are now ignored in latency updates. - A potential race when reporting an error to a client was fixed. (#3192) - Fix a bug where always_process nodes would sometimes IDLE. (#3189) - Optimize peer activation. Nodes are now activated more efficiently and independent of the number of links. It also reduces the number of eventfds and memory in remote clients. - A bug in property serialization was fixed. Values with spaces would only serialize the first part of the value. - Correctly handle the echo-canceler plugin init method fallback. The samplerate was not correctly configured. This is only a regression for people that have external echo-canceler plugins. - RAOP sink now only sets the volume on the remote end when the stream is recording. (#3175) - RAOP discover now tries to deduplicate entries from the same host. - A new zero-latency jackdbus bridge was added. This works similar to what pulseaudio has to offer and creates a sink/source when jackdbus is started. It is however much more efficient and runs the complete PipeWire graph as a synchronous JACK client. - The access module uses a more secure way to check the application executable. - module-combine-stream now has configurable delay and latency for each stream. This can be used to align sinks/sources with different latencies. - A potential crash in module-pulse-tunnel was fixed when shutting down. (#3199) - Module-rt will now clamp the nice value to the min allowed value to avoid errors from rtkit. (#3186) - Fix a bug with the session counters in module-rtp-sap. Also use the right format for L24. Improve the AES67 example config. - Improve some warning and info messages in module-rt. (#3194) - module-rtp-session should now do something when started without arguments. - A potential crash in module-rtp-session was fixed. (#3217) - module-filter-chain has better error reporting when a convolver fails to load. (#3223) - Move some things around to avoid compiler warnings. (#3171) - Increase mixer ports. Reorganize some things and bump mixer input ports from 128 to 512. - Fix a potential crash when a node is scheduled before it completes the setup. - The JACK sink and source SPA plugins have seen some improvements. - Allow the peaks resampler still if we disabled resampling. - Perform more cleanup in audioadapter when in error. - An optimized non-cancellable loop implementation was added. - Callbacks were optimized with a _fast() varsion that doesn't check the version and method. When this check is performed earlier, it can be skipped in performance critical places. - Some of the callbacks and system methods are now using the fast function calls in critical paths. - A potential division by zero was fixed in the ALSA plugins. - Improve rate and quantum when starting audioconvert. - Make it possible to override node.driver in the SPA null-audio-driver. (#3220) - The audio info parameter parsing was refactored and improved. - Fix some races with clients exiting when playing samples. - An option was added to change or disable the dbus name registration. (#2987) - Implement battery reporting using AT+XEVENT. - Disable hardware volume for 3M WorkTunes. - Implement BAP audio locations (channel positions) by using the new bluez properties. - Fix some errors reported by JACK test.cpp. (#2638) - Add jack.show-midi option to show/hide midi ports. - Add jack.max-client-ports option. JACK also has a port limit and so PipeWire needs it as well to make the tests happy. - Call the shutdown callback only when the server stopped, not when there is a random error. (#3070) - Avoid registering the same port name twice. - Call port registration callbacks in activate/deactivate. - Improve jack_port_connected(). - Improve some error reporting. - The JACK headers were updated to a newer version. - JACK callbacks are now managed with an event queue to simulate more what JACK does. This avoids emiting callbacks when a method is blocking for a reply and causing deadlocks. (#3183) - Assign unique names to JACK clients. (#2833) - Fix a potential crash when the thread_utils was used after free. - Aliases are now not filled in by default to improve JACK compatibility. (#3154) - The ALSA plugin will now wait for negotiation to complete or an error before _prepare() completes. This makes more applications deal correctly with the potential errors. - A new document about how scheduling is implemented was added. - Update the pw-cli man page. (#2988) - Document the SPA Pod serialization. - Document the PipeWire native protocol. Signed-off-by: Markus Volk Signed-off-by: Khem Raj --- .../recipes-multimedia/pipewire/pipewire_0.3.70.bb | 375 --------------------- .../recipes-multimedia/pipewire/pipewire_0.3.71.bb | 375 +++++++++++++++++++++ 2 files changed, 375 insertions(+), 375 deletions(-) delete mode 100644 meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.70.bb create mode 100644 meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.71.bb diff --git a/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.70.bb b/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.70.bb deleted file mode 100644 index 56595e768..000000000 --- a/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.70.bb +++ /dev/null @@ -1,375 +0,0 @@ -SUMMARY = "Multimedia processing server for Linux" -DESCRIPTION = "Linux server for handling and routing audio and video streams between applications and multimedia I/O devices" -HOMEPAGE = "https://pipewire.org/" -BUGTRACKER = "https://gitlab.freedesktop.org/pipewire/pipewire/issues" -AUTHOR = "Wim Taymans " -SECTION = "multimedia" - -LICENSE = "MIT & LGPL-2.1-or-later & GPL-2.0-only" -LIC_FILES_CHKSUM = " \ - file://LICENSE;md5=2158739e172e58dc9ab1bdd2d6ec9c72 \ - file://COPYING;md5=97be96ca4fab23e9657ffa590b931c1a \ -" - -DEPENDS = "dbus ncurses" - -SRCREV = "9f7d60c1e84cc0481afc3f6ccf76e127567943a8" -SRC_URI = "git://gitlab.freedesktop.org/pipewire/pipewire.git;branch=master;protocol=https" - -S = "${WORKDIR}/git" - -inherit meson pkgconfig systemd gettext useradd - -USERADD_PACKAGES = "${PN}" - -GROUPADD_PARAM:${PN} = "--system pipewire" - -USERADD_PARAM:${PN} = "--system --home / --no-create-home \ - --comment 'PipeWire multimedia daemon' \ - --gid pipewire --groups audio,video \ - pipewire" - -SYSTEMD_PACKAGES = "${PN}" - -# For "EVL", look up https://evlproject.org/ . It involves -# a specially prepared kernel, and is currently unavailable -# in Yocto. -# -# Vulkan support is currently (as of version 0.3.44) not functional. -# -# manpage generation requires xmltoman, which is not available. -# -# The session-managers list specifies which session managers Meson -# shall download (via git clone) and build as subprojects. In OE, -# this is not how a session manager should be built. Instead, they -# should be integrated as separate OE recipes. To prevent PipeWire -# from using this Meson feature, set an empty list. -# This does not disable support or the need for session managers, -# it just prevents this subproject feature. -# -# AptX and LDAC are not available in OE. Currently, neither -# are lv2 and ROC. -# -# The RTKit module is deprecated in favor of the newer RT module. -# It still exists for legacy setups that still include it in -# their PipeWire configuration files. -EXTRA_OEMESON += " \ - -Devl=disabled \ - -Dtests=disabled \ - -Dudevrulesdir=${nonarch_base_libdir}/udev/rules.d/ \ - -Dsystemd-system-unit-dir=${systemd_system_unitdir} \ - -Dsystemd-user-unit-dir=${systemd_user_unitdir} \ - -Dman=disabled \ - -Dsession-managers='[]' \ - -Dlv2=disabled \ - -Droc=disabled \ - -Dbluez5-codec-aptx=disabled \ - -Dbluez5-codec-ldac=disabled \ - -Dlegacy-rtkit=false \ -" - -# spa alsa plugin code uses typedef redefinition, which is officially a C11 feature. -# Pipewire builds with 'c_std=gnu99' by default. Recent versions of gcc don't issue this warning in gnu99 -# mode but it looks like clang still does -CFLAGS:append = " -Wno-typedef-redefinition" - -# According to wireplumber documentation only one session manager should be installed at a time -# Possible options are media-session, which has fewer dependencies but is very simple, -# or wireplumber, which is more powerful. -PIPEWIRE_SESSION_MANAGER ??= "wireplumber" - -FFMPEG_AVAILABLE = "${@bb.utils.contains('LICENSE_FLAGS_ACCEPTED', 'commercial', 'ffmpeg', '', d)}" -BLUETOOTH_AAC = "${@bb.utils.contains('LICENSE_FLAGS_ACCEPTED', 'commercial', 'bluez-aac', '', d)}" - -PACKAGECONFIG:class-target ??= " \ - ${@bb.utils.contains('DISTRO_FEATURES', 'zeroconf', 'avahi', '', d)} \ - ${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', 'bluez bluez-opus ${BLUETOOTH_AAC}', '', d)} \ - ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd systemd-system-service systemd-user-service', '', d)} \ - ${@bb.utils.filter('DISTRO_FEATURES', 'alsa vulkan pulseaudio', d)} \ - ${PIPEWIRE_SESSION_MANAGER} \ - ${FFMPEG_AVAILABLE} avahi flatpak gstreamer gsettings jack libusb pw-cat raop sndfile v4l2 udev volume webrtc-echo-cancelling libcamera \ -" - -# "jack" and "pipewire-jack" packageconfigs cannot be both enabled, -# since "jack" imports libjack, and "pipewire-jack" generates -# libjack.so* files, thus colliding with the libpack package. This -# is why these two are marked in their respective packageconfigs -# as being in conflict. -PACKAGECONFIG[alsa] = "-Dalsa=enabled,-Dalsa=disabled,alsa-lib udev,,pipewire-alsa pipewire-alsa-card-profile" -PACKAGECONFIG[avahi] = "-Davahi=enabled,-Davahi=disabled,avahi" -PACKAGECONFIG[bluez] = "-Dbluez5=enabled,-Dbluez5=disabled,bluez5 sbc" -PACKAGECONFIG[bluez-aac] = "-Dbluez5-codec-aac=enabled,-Dbluez5-codec-aac=disabled,fdk-aac" -PACKAGECONFIG[bluez-opus] = "-Dbluez5-codec-opus=enabled,-Dbluez5-codec-opus=disabled,libopus" -PACKAGECONFIG[docs] = "-Ddocs=enabled,-Ddocs=disabled,doxygen-native graphviz-native" -PACKAGECONFIG[ffmpeg] = "-Dffmpeg=enabled,-Dffmpeg=disabled,ffmpeg" -PACKAGECONFIG[flatpak] = "-Dflatpak=enabled,-Dflatpak=disabled,glib-2.0" -PACKAGECONFIG[gsettings] = "-Dgsettings=enabled,-Dgsettings=disabled,glib-2.0" -PACKAGECONFIG[gstreamer] = "-Dgstreamer=enabled,-Dgstreamer=disabled,glib-2.0 gstreamer1.0 gstreamer1.0-plugins-base,,gstreamer1.0-pipewire" -PACKAGECONFIG[jack] = "-Djack=enabled,-Djack=disabled,jack,,,pipewire-jack" -PACKAGECONFIG[libcamera] = "-Dlibcamera=enabled,-Dlibcamera=disabled,libcamera libdrm" -PACKAGECONFIG[libcanberra] = "-Dlibcanberra=enabled,-Dlibcanberra=disabled,libcanberra" -PACKAGECONFIG[libusb] = "-Dlibusb=enabled,-Dlibusb=disabled,libusb" -PACKAGECONFIG[media-session] = ",,,pipewire-media-session,,wireplumber" -PACKAGECONFIG[pulseaudio] = "-Dlibpulse=enabled,-Dlibpulse=disabled,pulseaudio,,pipewire-pulse" -PACKAGECONFIG[pipewire-alsa] = "-Dpipewire-alsa=enabled,-Dpipewire-alsa=disabled,alsa-lib" -PACKAGECONFIG[pipewire-jack] = "-Dpipewire-jack=enabled -Dlibjack-path=${libdir}/${PW_MODULE_SUBDIR}/jack,-Dpipewire-jack=disabled,jack,,pipewire-jack,jack" -PACKAGECONFIG[pw-cat] = "-Dpw-cat=enabled,-Dpw-cat=disabled" -PACKAGECONFIG[raop] = "-Draop=enabled,-Draop=disabled,openssl" -PACKAGECONFIG[sdl2] = "-Dsdl2=enabled,-Dsdl2=disabled,libsdl2" -PACKAGECONFIG[sndfile] = "-Dsndfile=enabled,-Dsndfile=disabled,libsndfile1" -PACKAGECONFIG[systemd] = "-Dsystemd=enabled,-Dsystemd=disabled,systemd" -PACKAGECONFIG[systemd-system-service] = "-Dsystemd-system-service=enabled,-Dsystemd-system-service=disabled,systemd" -# "systemd-user-service" packageconfig will only install service -# files to rootfs but not enable them as systemd.bbclass -# currently lacks the feature of enabling user services. -PACKAGECONFIG[systemd-user-service] = "-Dsystemd-user-service=enabled,-Dsystemd-user-service=disabled,systemd" -# pw-cat needs sndfile packageconfig to be enabled -PACKAGECONFIG[udev] = "-Dudev=enabled,-Dudev=disabled,udev" -PACKAGECONFIG[v4l2] = "-Dv4l2=enabled,-Dv4l2=disabled,udev" -PACKAGECONFIG[volume] = "-Dvolume=enabled,-Dvolume=disabled" -PACKAGECONFIG[vulkan] = "-Dvulkan=enabled,-Dvulkan=disabled,vulkan-headers vulkan-loader" -PACKAGECONFIG[webrtc-echo-cancelling] = "-Decho-cancel-webrtc=enabled,-Decho-cancel-webrtc=disabled,webrtc-audio-processing" -PACKAGECONFIG[wireplumber] = ",,,wireplumber,,media-session" - -PACKAGESPLITFUNCS:prepend = " split_dynamic_packages " -PACKAGESPLITFUNCS:append = " set_dynamic_metapkg_rdepends " - -SPA_SUBDIR = "spa-0.2" -PW_MODULE_SUBDIR = "pipewire-0.3" - -remove_unused_installed_files() { - # jack.conf is used by pipewire-jack (not the JACK SPA plugin). - # Remove it if pipewire-jack is not built to avoid creating the - # pipewire-jack package. - if ${@bb.utils.contains('PACKAGECONFIG', 'pipewire-jack', 'false', 'true', d)}; then - rm -f "${D}${datadir}/pipewire/jack.conf" - fi - - # minimal.conf is an example of how to minimally configure the - # daemon and is not meant to be used for production. - rm -f "${D}${datadir}/pipewire/minimal.conf" -} - -do_install[postfuncs] += "remove_unused_installed_files" - -python split_dynamic_packages () { - # Create packages for each SPA plugin. These plugins are located - # in individual subdirectories, so a recursive search is needed. - spa_libdir = d.expand('${libdir}/${SPA_SUBDIR}') - do_split_packages(d, spa_libdir, r'^libspa-(.*)\.so$', d.expand('${PN}-spa-plugins-%s'), 'PipeWire SPA plugin for %s', extra_depends='', recursive=True) - - # Create packages for each PipeWire module. - pw_module_libdir = d.expand('${libdir}/${PW_MODULE_SUBDIR}') - do_split_packages(d, pw_module_libdir, r'^libpipewire-module-(.*)\.so$', d.expand('${PN}-modules-%s'), 'PipeWire %s module', extra_depends='', recursive=False) -} - -python set_dynamic_metapkg_rdepends () { - import os - import oe.utils - - if bb.data.inherits_class('nativesdk', d) or bb.data.inherits_class('native', d): - return - - # Go through all generated SPA plugin and PipeWire module packages - # (excluding the main package and the -meta package itself) and - # add them to the -meta package as RDEPENDS. - - base_pn = d.getVar('PN') - - spa_pn = base_pn + '-spa-plugins' - spa_metapkg = spa_pn + '-meta' - - pw_module_pn = base_pn + '-modules' - pw_module_metapkg = pw_module_pn + '-meta' - - d.setVar('ALLOW_EMPTY:' + spa_metapkg, "1") - d.setVar('FILES:' + spa_metapkg, "") - - d.setVar('ALLOW_EMPTY:' + pw_module_metapkg, "1") - d.setVar('FILES:' + pw_module_metapkg, "") - - blacklist = [ spa_pn, spa_metapkg, pw_module_pn, pw_module_metapkg ] - spa_metapkg_rdepends = [] - pw_module_metapkg_rdepends = [] - pkgdest = d.getVar('PKGDEST') - - for pkg in oe.utils.packages_filter_out_system(d): - if pkg in blacklist: - continue - - is_spa_pkg = pkg.startswith(spa_pn) - is_pw_module_pkg = pkg.startswith(pw_module_pn) - if not is_spa_pkg and not is_pw_module_pkg: - continue - - if pkg in spa_metapkg_rdepends or pkg in pw_module_metapkg_rdepends: - continue - - # See if the package is empty by looking at the contents of its - # PKGDEST subdirectory. If this subdirectory is empty, then then - # package is empty as well. Empty packages do not get added to - # the meta package's RDEPENDS. - pkgdir = os.path.join(pkgdest, pkg) - if os.path.exists(pkgdir): - dir_contents = os.listdir(pkgdir) or [] - else: - dir_contents = [] - is_empty = len(dir_contents) == 0 - if not is_empty: - if is_spa_pkg: - spa_metapkg_rdepends.append(pkg) - if is_pw_module_pkg: - pw_module_metapkg_rdepends.append(pkg) - - d.setVar('RDEPENDS:' + spa_metapkg, ' '.join(spa_metapkg_rdepends)) - d.setVar('DESCRIPTION:' + spa_metapkg, spa_pn + ' meta package') - - d.setVar('RDEPENDS:' + pw_module_metapkg, ' '.join(pw_module_metapkg_rdepends)) - d.setVar('DESCRIPTION:' + pw_module_metapkg, pw_module_pn + ' meta package') -} - -PACKAGES =+ "\ - libpipewire \ - ${PN}-tools \ - ${PN}-pulse \ - ${PN}-alsa \ - ${PN}-jack \ - ${PN}-spa-plugins \ - ${PN}-spa-plugins-meta \ - ${PN}-spa-tools \ - ${PN}-modules \ - ${PN}-modules-meta \ - ${PN}-alsa-card-profile \ - ${PN}-v4l2 \ - gstreamer1.0-pipewire \ -" - -PACKAGES_DYNAMIC = "^${PN}-spa-plugins.* ^${PN}-modules.*" -PACKAGES_DYNAMIC:class-native = "" - -SYSTEMD_SERVICE:${PN} = "${@bb.utils.contains('PACKAGECONFIG', 'systemd-system-service', 'pipewire.service', '', d)}" -CONFFILES:${PN} += "${datadir}/pipewire/pipewire.conf" -FILES:${PN} = " \ - ${datadir}/pipewire \ - ${systemd_system_unitdir}/pipewire* \ - ${systemd_user_unitdir} \ - ${bindir}/pipewire \ - ${bindir}/pipewire-avb \ - ${bindir}/pipewire-aes67 \ - ${sysconfdir}/security/limits.d \ -" - -RRECOMMENDS:${PN}:class-target += " \ - pipewire-modules-meta \ - pipewire-spa-plugins-meta \ -" - -FILES:${PN}-dev += " \ - ${libdir}/${PW_MODULE_SUBDIR}/jack/libjack*.so \ -" - -CONFFILES:libpipewire += "${datadir}/pipewire/client.conf" -FILES:libpipewire = " \ - ${datadir}/pipewire/client.conf \ - ${libdir}/libpipewire-*.so.* \ -" -# Add the bare minimum modules and plugins required to be able -# to use libpipewire. Without these, it is essentially unusable. -RDEPENDS:libpipewire += " \ - ${PN}-modules-client-node \ - ${PN}-modules-protocol-native \ - ${PN}-spa-plugins-support \ -" - -FILES:${PN}-tools = " \ - ${bindir}/pw-cat \ - ${bindir}/pw-cli \ - ${bindir}/pw-config \ - ${bindir}/pw-dot \ - ${bindir}/pw-dsdplay \ - ${bindir}/pw-dump \ - ${bindir}/pw-encplay \ - ${bindir}/pw-link \ - ${bindir}/pw-loopback \ - ${bindir}/pw-metadata \ - ${bindir}/pw-mididump \ - ${bindir}/pw-midiplay \ - ${bindir}/pw-midirecord \ - ${bindir}/pw-mon \ - ${bindir}/pw-play \ - ${bindir}/pw-profiler \ - ${bindir}/pw-record \ - ${bindir}/pw-reserve \ - ${bindir}/pw-top \ -" - -# This is a shim daemon that is intended to be used as a -# drop-in PulseAudio replacement, providing a pulseaudio-compatible -# socket that can be used by applications that use libpulse. -CONFFILES:${PN}-pulse += "${datadir}/pipewire/pipewire-pulse.conf" -FILES:${PN}-pulse = " \ - ${datadir}/pipewire/pipewire-pulse.conf \ - ${systemd_system_unitdir}/pipewire-pulse.* \ - ${systemd_user_unitdir}/pipewire-pulse.* \ - ${bindir}/pipewire-pulse \ -" -RDEPENDS:${PN}-pulse += " \ - ${PN}-modules-protocol-pulse \ -" - -# ALSA plugin to redirect audio to pipewire. -FILES:${PN}-alsa = "\ - ${libdir}/alsa-lib/* \ - ${datadir}/alsa/alsa.conf.d/* \ -" - -# JACK drop-in libraries to redirect audio to pipewire. -CONFFILES:${PN}-jack = "${datadir}/pipewire/jack.conf" -FILES:${PN}-jack = "\ - ${bindir}/pw-jack \ - ${datadir}/pipewire/jack.conf \ - ${libdir}/${PW_MODULE_SUBDIR}/jack/libjack*.so.* \ -" - -# Dynamic SPA plugin packages (see set_dynamic_metapkg_rdepends). -FILES:${PN}-spa-plugins = "" -RRECOMMENDS:${PN}-spa-plugins += "${PN}-spa-plugins-meta" - -FILES:${PN}-spa-plugins-bluez5 += " \ - ${datadir}/${SPA_SUBDIR}/bluez5/* \ -" - -FILES:${PN}-spa-tools = " \ - ${bindir}/spa-* \ -" - -# Dynamic PipeWire module packages (see set_dynamic_metapkg_rdepends). -FILES:${PN}-modules = "" -RRECOMMENDS:${PN}-modules += "${PN}-modules-meta" - -CONFFILES:${PN}-modules-rt = "${datadir}/pipewire/client-rt.conf" -FILES:${PN}-modules-rt += " \ - ${datadir}/pipewire/client-rt.conf \ - " - -CONFFILES:${PN}-modules-filter-chain = "${datadir}/pipewire/filter-chain/*" -FILES:${PN}-modules-filter-chain += " \ - ${datadir}/pipewire/filter-chain/* \ -" - -FILES:${PN}-alsa-card-profile = " \ - ${datadir}/alsa-card-profile/* \ - ${nonarch_base_libdir}/udev/rules.d/90-pipewire-alsa.rules \ -" - -# V4L2 interface emulator for sending/receiving data between PipeWire and V4L2 applications. -FILES:${PN}-v4l2 += " \ - ${bindir}/pw-v4l2 \ - ${libdir}/${PW_MODULE_SUBDIR}/v4l2/libpw-v4l2.so \ -" - -FILES:gstreamer1.0-pipewire = " \ - ${libdir}/gstreamer-1.0/* \ -" - -BBCLASSEXTEND = "native nativesdk" diff --git a/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.71.bb b/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.71.bb new file mode 100644 index 000000000..7f117e10b --- /dev/null +++ b/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.71.bb @@ -0,0 +1,375 @@ +SUMMARY = "Multimedia processing server for Linux" +DESCRIPTION = "Linux server for handling and routing audio and video streams between applications and multimedia I/O devices" +HOMEPAGE = "https://pipewire.org/" +BUGTRACKER = "https://gitlab.freedesktop.org/pipewire/pipewire/issues" +AUTHOR = "Wim Taymans " +SECTION = "multimedia" + +LICENSE = "MIT & LGPL-2.1-or-later & GPL-2.0-only" +LIC_FILES_CHKSUM = " \ + file://LICENSE;md5=2158739e172e58dc9ab1bdd2d6ec9c72 \ + file://COPYING;md5=97be96ca4fab23e9657ffa590b931c1a \ +" + +DEPENDS = "dbus ncurses" + +SRCREV = "bd225b14bbda1a6e2dc7a52780eaf728920e0ff2" +SRC_URI = "git://gitlab.freedesktop.org/pipewire/pipewire.git;branch=master;protocol=https" + +S = "${WORKDIR}/git" + +inherit meson pkgconfig systemd gettext useradd + +USERADD_PACKAGES = "${PN}" + +GROUPADD_PARAM:${PN} = "--system pipewire" + +USERADD_PARAM:${PN} = "--system --home / --no-create-home \ + --comment 'PipeWire multimedia daemon' \ + --gid pipewire --groups audio,video \ + pipewire" + +SYSTEMD_PACKAGES = "${PN}" + +# For "EVL", look up https://evlproject.org/ . It involves +# a specially prepared kernel, and is currently unavailable +# in Yocto. +# +# Vulkan support is currently (as of version 0.3.44) not functional. +# +# manpage generation requires xmltoman, which is not available. +# +# The session-managers list specifies which session managers Meson +# shall download (via git clone) and build as subprojects. In OE, +# this is not how a session manager should be built. Instead, they +# should be integrated as separate OE recipes. To prevent PipeWire +# from using this Meson feature, set an empty list. +# This does not disable support or the need for session managers, +# it just prevents this subproject feature. +# +# AptX and LDAC are not available in OE. Currently, neither +# are lv2 and ROC. +# +# The RTKit module is deprecated in favor of the newer RT module. +# It still exists for legacy setups that still include it in +# their PipeWire configuration files. +EXTRA_OEMESON += " \ + -Devl=disabled \ + -Dtests=disabled \ + -Dudevrulesdir=${nonarch_base_libdir}/udev/rules.d/ \ + -Dsystemd-system-unit-dir=${systemd_system_unitdir} \ + -Dsystemd-user-unit-dir=${systemd_user_unitdir} \ + -Dman=disabled \ + -Dsession-managers='[]' \ + -Dlv2=disabled \ + -Droc=disabled \ + -Dbluez5-codec-aptx=disabled \ + -Dbluez5-codec-ldac=disabled \ + -Dlegacy-rtkit=false \ +" + +# spa alsa plugin code uses typedef redefinition, which is officially a C11 feature. +# Pipewire builds with 'c_std=gnu99' by default. Recent versions of gcc don't issue this warning in gnu99 +# mode but it looks like clang still does +CFLAGS:append = " -Wno-typedef-redefinition" + +# According to wireplumber documentation only one session manager should be installed at a time +# Possible options are media-session, which has fewer dependencies but is very simple, +# or wireplumber, which is more powerful. +PIPEWIRE_SESSION_MANAGER ??= "wireplumber" + +FFMPEG_AVAILABLE = "${@bb.utils.contains('LICENSE_FLAGS_ACCEPTED', 'commercial', 'ffmpeg', '', d)}" +BLUETOOTH_AAC = "${@bb.utils.contains('LICENSE_FLAGS_ACCEPTED', 'commercial', 'bluez-aac', '', d)}" + +PACKAGECONFIG:class-target ??= " \ + ${@bb.utils.contains('DISTRO_FEATURES', 'zeroconf', 'avahi', '', d)} \ + ${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', 'bluez bluez-opus ${BLUETOOTH_AAC}', '', d)} \ + ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd systemd-system-service systemd-user-service', '', d)} \ + ${@bb.utils.filter('DISTRO_FEATURES', 'alsa vulkan pulseaudio', d)} \ + ${PIPEWIRE_SESSION_MANAGER} \ + ${FFMPEG_AVAILABLE} avahi flatpak gstreamer gsettings jack libusb pw-cat raop sndfile v4l2 udev volume webrtc-echo-cancelling libcamera \ +" + +# "jack" and "pipewire-jack" packageconfigs cannot be both enabled, +# since "jack" imports libjack, and "pipewire-jack" generates +# libjack.so* files, thus colliding with the libpack package. This +# is why these two are marked in their respective packageconfigs +# as being in conflict. +PACKAGECONFIG[alsa] = "-Dalsa=enabled,-Dalsa=disabled,alsa-lib udev,,pipewire-alsa pipewire-alsa-card-profile" +PACKAGECONFIG[avahi] = "-Davahi=enabled,-Davahi=disabled,avahi" +PACKAGECONFIG[bluez] = "-Dbluez5=enabled,-Dbluez5=disabled,bluez5 sbc" +PACKAGECONFIG[bluez-aac] = "-Dbluez5-codec-aac=enabled,-Dbluez5-codec-aac=disabled,fdk-aac" +PACKAGECONFIG[bluez-opus] = "-Dbluez5-codec-opus=enabled,-Dbluez5-codec-opus=disabled,libopus" +PACKAGECONFIG[docs] = "-Ddocs=enabled,-Ddocs=disabled,doxygen-native graphviz-native" +PACKAGECONFIG[ffmpeg] = "-Dffmpeg=enabled,-Dffmpeg=disabled,ffmpeg" +PACKAGECONFIG[flatpak] = "-Dflatpak=enabled,-Dflatpak=disabled,glib-2.0" +PACKAGECONFIG[gsettings] = "-Dgsettings=enabled,-Dgsettings=disabled,glib-2.0" +PACKAGECONFIG[gstreamer] = "-Dgstreamer=enabled,-Dgstreamer=disabled,glib-2.0 gstreamer1.0 gstreamer1.0-plugins-base,,gstreamer1.0-pipewire" +PACKAGECONFIG[jack] = "-Djack=enabled,-Djack=disabled,jack,,,pipewire-jack" +PACKAGECONFIG[libcamera] = "-Dlibcamera=enabled,-Dlibcamera=disabled,libcamera libdrm" +PACKAGECONFIG[libcanberra] = "-Dlibcanberra=enabled,-Dlibcanberra=disabled,libcanberra" +PACKAGECONFIG[libusb] = "-Dlibusb=enabled,-Dlibusb=disabled,libusb" +PACKAGECONFIG[media-session] = ",,,pipewire-media-session,,wireplumber" +PACKAGECONFIG[pulseaudio] = "-Dlibpulse=enabled,-Dlibpulse=disabled,pulseaudio,,pipewire-pulse" +PACKAGECONFIG[pipewire-alsa] = "-Dpipewire-alsa=enabled,-Dpipewire-alsa=disabled,alsa-lib" +PACKAGECONFIG[pipewire-jack] = "-Dpipewire-jack=enabled -Dlibjack-path=${libdir}/${PW_MODULE_SUBDIR}/jack,-Dpipewire-jack=disabled,jack,,pipewire-jack,jack" +PACKAGECONFIG[pw-cat] = "-Dpw-cat=enabled,-Dpw-cat=disabled" +PACKAGECONFIG[raop] = "-Draop=enabled,-Draop=disabled,openssl" +PACKAGECONFIG[sdl2] = "-Dsdl2=enabled,-Dsdl2=disabled,libsdl2" +PACKAGECONFIG[sndfile] = "-Dsndfile=enabled,-Dsndfile=disabled,libsndfile1" +PACKAGECONFIG[systemd] = "-Dsystemd=enabled,-Dsystemd=disabled,systemd" +PACKAGECONFIG[systemd-system-service] = "-Dsystemd-system-service=enabled,-Dsystemd-system-service=disabled,systemd" +# "systemd-user-service" packageconfig will only install service +# files to rootfs but not enable them as systemd.bbclass +# currently lacks the feature of enabling user services. +PACKAGECONFIG[systemd-user-service] = "-Dsystemd-user-service=enabled,-Dsystemd-user-service=disabled,systemd" +# pw-cat needs sndfile packageconfig to be enabled +PACKAGECONFIG[udev] = "-Dudev=enabled,-Dudev=disabled,udev" +PACKAGECONFIG[v4l2] = "-Dv4l2=enabled,-Dv4l2=disabled,udev" +PACKAGECONFIG[volume] = "-Dvolume=enabled,-Dvolume=disabled" +PACKAGECONFIG[vulkan] = "-Dvulkan=enabled,-Dvulkan=disabled,vulkan-headers vulkan-loader" +PACKAGECONFIG[webrtc-echo-cancelling] = "-Decho-cancel-webrtc=enabled,-Decho-cancel-webrtc=disabled,webrtc-audio-processing" +PACKAGECONFIG[wireplumber] = ",,,wireplumber,,media-session" + +PACKAGESPLITFUNCS:prepend = " split_dynamic_packages " +PACKAGESPLITFUNCS:append = " set_dynamic_metapkg_rdepends " + +SPA_SUBDIR = "spa-0.2" +PW_MODULE_SUBDIR = "pipewire-0.3" + +remove_unused_installed_files() { + # jack.conf is used by pipewire-jack (not the JACK SPA plugin). + # Remove it if pipewire-jack is not built to avoid creating the + # pipewire-jack package. + if ${@bb.utils.contains('PACKAGECONFIG', 'pipewire-jack', 'false', 'true', d)}; then + rm -f "${D}${datadir}/pipewire/jack.conf" + fi + + # minimal.conf is an example of how to minimally configure the + # daemon and is not meant to be used for production. + rm -f "${D}${datadir}/pipewire/minimal.conf" +} + +do_install[postfuncs] += "remove_unused_installed_files" + +python split_dynamic_packages () { + # Create packages for each SPA plugin. These plugins are located + # in individual subdirectories, so a recursive search is needed. + spa_libdir = d.expand('${libdir}/${SPA_SUBDIR}') + do_split_packages(d, spa_libdir, r'^libspa-(.*)\.so$', d.expand('${PN}-spa-plugins-%s'), 'PipeWire SPA plugin for %s', extra_depends='', recursive=True) + + # Create packages for each PipeWire module. + pw_module_libdir = d.expand('${libdir}/${PW_MODULE_SUBDIR}') + do_split_packages(d, pw_module_libdir, r'^libpipewire-module-(.*)\.so$', d.expand('${PN}-modules-%s'), 'PipeWire %s module', extra_depends='', recursive=False) +} + +python set_dynamic_metapkg_rdepends () { + import os + import oe.utils + + if bb.data.inherits_class('nativesdk', d) or bb.data.inherits_class('native', d): + return + + # Go through all generated SPA plugin and PipeWire module packages + # (excluding the main package and the -meta package itself) and + # add them to the -meta package as RDEPENDS. + + base_pn = d.getVar('PN') + + spa_pn = base_pn + '-spa-plugins' + spa_metapkg = spa_pn + '-meta' + + pw_module_pn = base_pn + '-modules' + pw_module_metapkg = pw_module_pn + '-meta' + + d.setVar('ALLOW_EMPTY:' + spa_metapkg, "1") + d.setVar('FILES:' + spa_metapkg, "") + + d.setVar('ALLOW_EMPTY:' + pw_module_metapkg, "1") + d.setVar('FILES:' + pw_module_metapkg, "") + + blacklist = [ spa_pn, spa_metapkg, pw_module_pn, pw_module_metapkg ] + spa_metapkg_rdepends = [] + pw_module_metapkg_rdepends = [] + pkgdest = d.getVar('PKGDEST') + + for pkg in oe.utils.packages_filter_out_system(d): + if pkg in blacklist: + continue + + is_spa_pkg = pkg.startswith(spa_pn) + is_pw_module_pkg = pkg.startswith(pw_module_pn) + if not is_spa_pkg and not is_pw_module_pkg: + continue + + if pkg in spa_metapkg_rdepends or pkg in pw_module_metapkg_rdepends: + continue + + # See if the package is empty by looking at the contents of its + # PKGDEST subdirectory. If this subdirectory is empty, then then + # package is empty as well. Empty packages do not get added to + # the meta package's RDEPENDS. + pkgdir = os.path.join(pkgdest, pkg) + if os.path.exists(pkgdir): + dir_contents = os.listdir(pkgdir) or [] + else: + dir_contents = [] + is_empty = len(dir_contents) == 0 + if not is_empty: + if is_spa_pkg: + spa_metapkg_rdepends.append(pkg) + if is_pw_module_pkg: + pw_module_metapkg_rdepends.append(pkg) + + d.setVar('RDEPENDS:' + spa_metapkg, ' '.join(spa_metapkg_rdepends)) + d.setVar('DESCRIPTION:' + spa_metapkg, spa_pn + ' meta package') + + d.setVar('RDEPENDS:' + pw_module_metapkg, ' '.join(pw_module_metapkg_rdepends)) + d.setVar('DESCRIPTION:' + pw_module_metapkg, pw_module_pn + ' meta package') +} + +PACKAGES =+ "\ + libpipewire \ + ${PN}-tools \ + ${PN}-pulse \ + ${PN}-alsa \ + ${PN}-jack \ + ${PN}-spa-plugins \ + ${PN}-spa-plugins-meta \ + ${PN}-spa-tools \ + ${PN}-modules \ + ${PN}-modules-meta \ + ${PN}-alsa-card-profile \ + ${PN}-v4l2 \ + gstreamer1.0-pipewire \ +" + +PACKAGES_DYNAMIC = "^${PN}-spa-plugins.* ^${PN}-modules.*" +PACKAGES_DYNAMIC:class-native = "" + +SYSTEMD_SERVICE:${PN} = "${@bb.utils.contains('PACKAGECONFIG', 'systemd-system-service', 'pipewire.service', '', d)}" +CONFFILES:${PN} += "${datadir}/pipewire/pipewire.conf" +FILES:${PN} = " \ + ${datadir}/pipewire \ + ${systemd_system_unitdir}/pipewire* \ + ${systemd_user_unitdir} \ + ${bindir}/pipewire \ + ${bindir}/pipewire-avb \ + ${bindir}/pipewire-aes67 \ + ${sysconfdir}/security/limits.d \ +" + +RRECOMMENDS:${PN}:class-target += " \ + pipewire-modules-meta \ + pipewire-spa-plugins-meta \ +" + +FILES:${PN}-dev += " \ + ${libdir}/${PW_MODULE_SUBDIR}/jack/libjack*.so \ +" + +CONFFILES:libpipewire += "${datadir}/pipewire/client.conf" +FILES:libpipewire = " \ + ${datadir}/pipewire/client.conf \ + ${libdir}/libpipewire-*.so.* \ +" +# Add the bare minimum modules and plugins required to be able +# to use libpipewire. Without these, it is essentially unusable. +RDEPENDS:libpipewire += " \ + ${PN}-modules-client-node \ + ${PN}-modules-protocol-native \ + ${PN}-spa-plugins-support \ +" + +FILES:${PN}-tools = " \ + ${bindir}/pw-cat \ + ${bindir}/pw-cli \ + ${bindir}/pw-config \ + ${bindir}/pw-dot \ + ${bindir}/pw-dsdplay \ + ${bindir}/pw-dump \ + ${bindir}/pw-encplay \ + ${bindir}/pw-link \ + ${bindir}/pw-loopback \ + ${bindir}/pw-metadata \ + ${bindir}/pw-mididump \ + ${bindir}/pw-midiplay \ + ${bindir}/pw-midirecord \ + ${bindir}/pw-mon \ + ${bindir}/pw-play \ + ${bindir}/pw-profiler \ + ${bindir}/pw-record \ + ${bindir}/pw-reserve \ + ${bindir}/pw-top \ +" + +# This is a shim daemon that is intended to be used as a +# drop-in PulseAudio replacement, providing a pulseaudio-compatible +# socket that can be used by applications that use libpulse. +CONFFILES:${PN}-pulse += "${datadir}/pipewire/pipewire-pulse.conf" +FILES:${PN}-pulse = " \ + ${datadir}/pipewire/pipewire-pulse.conf \ + ${systemd_system_unitdir}/pipewire-pulse.* \ + ${systemd_user_unitdir}/pipewire-pulse.* \ + ${bindir}/pipewire-pulse \ +" +RDEPENDS:${PN}-pulse += " \ + ${PN}-modules-protocol-pulse \ +" + +# ALSA plugin to redirect audio to pipewire. +FILES:${PN}-alsa = "\ + ${libdir}/alsa-lib/* \ + ${datadir}/alsa/alsa.conf.d/* \ +" + +# JACK drop-in libraries to redirect audio to pipewire. +CONFFILES:${PN}-jack = "${datadir}/pipewire/jack.conf" +FILES:${PN}-jack = "\ + ${bindir}/pw-jack \ + ${datadir}/pipewire/jack.conf \ + ${libdir}/${PW_MODULE_SUBDIR}/jack/libjack*.so.* \ +" + +# Dynamic SPA plugin packages (see set_dynamic_metapkg_rdepends). +FILES:${PN}-spa-plugins = "" +RRECOMMENDS:${PN}-spa-plugins += "${PN}-spa-plugins-meta" + +FILES:${PN}-spa-plugins-bluez5 += " \ + ${datadir}/${SPA_SUBDIR}/bluez5/* \ +" + +FILES:${PN}-spa-tools = " \ + ${bindir}/spa-* \ +" + +# Dynamic PipeWire module packages (see set_dynamic_metapkg_rdepends). +FILES:${PN}-modules = "" +RRECOMMENDS:${PN}-modules += "${PN}-modules-meta" + +CONFFILES:${PN}-modules-rt = "${datadir}/pipewire/client-rt.conf" +FILES:${PN}-modules-rt += " \ + ${datadir}/pipewire/client-rt.conf \ + " + +CONFFILES:${PN}-modules-filter-chain = "${datadir}/pipewire/filter-chain/*" +FILES:${PN}-modules-filter-chain += " \ + ${datadir}/pipewire/filter-chain/* \ +" + +FILES:${PN}-alsa-card-profile = " \ + ${datadir}/alsa-card-profile/* \ + ${nonarch_base_libdir}/udev/rules.d/90-pipewire-alsa.rules \ +" + +# V4L2 interface emulator for sending/receiving data between PipeWire and V4L2 applications. +FILES:${PN}-v4l2 += " \ + ${bindir}/pw-v4l2 \ + ${libdir}/${PW_MODULE_SUBDIR}/v4l2/libpw-v4l2.so \ +" + +FILES:gstreamer1.0-pipewire = " \ + ${libdir}/gstreamer-1.0/* \ +" + +BBCLASSEXTEND = "native nativesdk" -- cgit v1.2.3-54-g00ecf