7 files changed, 280 insertions, 0 deletions

diff --git a/meta-networking/recipes-daemons/vsftpd/files/change-secure_chroot_dir.patch b/meta-networking/recipes-daemons/vsftpd/files/change-secure_chroot_dir.patch
new file mode 100644
index 000000000..5f2860e84
--- /dev/null
+++ b/meta-networking/recipes-daemons/vsftpd/files/change-secure_chroot_dir.patch
@@ -0,0 +1,55 @@
+vsftpd: change default value of secure_chroot_dir
+
+Upstream-Status: Pending
+
+Change secure_chroot_dir pointing to a volatile directory.
+
+Signed-off-by: Ming Liu <ming.liu@windriver.com>
+---
+ INSTALL       |    6 +++---
+ tunables.c    |    2 +-
+ vsftpd.conf.5 |    2 +-
+ 3 files changed, 5 insertions(+), 5 deletions(-)
+
+diff -urpN a/INSTALL b/INSTALL
+--- a/INSTALL   2013-09-13 10:23:57.504972397 +0800
++++ b/INSTALL   2013-09-13 10:25:25.664971779 +0800
+@@ -27,11 +27,11 @@ user in case it does not already exist. 
+ [root@localhost root]# useradd nobody
+ useradd: user nobody exists
+ 
+-2b) vsftpd needs the (empty) directory /usr/share/empty in the default
++2b) vsftpd needs the (empty) directory /var/run/vsftpd/empty in the default
+ configuration. Add this directory in case it does not already exist. e.g.:
+ 
+-[root@localhost root]# mkdir /usr/share/empty/
+-mkdir: cannot create directory `/usr/share/empty': File exists
++[root@localhost root]# mkdir /var/run/vsftpd/empty/
++mkdir: cannot create directory `/var/run/vsftpd/empty': File exists
+ 
+ 2c) For anonymous FTP, you will need the user "ftp" to exist, and have a
+ valid home directory (which is NOT owned or writable by the user "ftp").
+diff -urpN a/tunables.c b/tunables.c
+--- a/tunables.c        2013-09-13 10:26:29.554972817 +0800
++++ b/tunables.c        2013-09-13 10:27:18.104972210 +0800
+@@ -254,7 +254,7 @@ tunables_load_defaults()
+   /* -rw------- */
+   tunable_chown_upload_mode = 0600;
+ 
+-  install_str_setting("/usr/share/empty", &tunable_secure_chroot_dir);
++  install_str_setting("/var/run/vsftpd/empty", &tunable_secure_chroot_dir);
+   install_str_setting("ftp", &tunable_ftp_username);
+   install_str_setting("root", &tunable_chown_username);
+   install_str_setting("/var/log/xferlog", &tunable_xferlog_file);
+diff -urpN a/vsftpd.conf.5 b/vsftpd.conf.5
+--- a/vsftpd.conf.5     2013-09-13 10:09:33.774972462 +0800
++++ b/vsftpd.conf.5     2013-09-13 10:10:41.914971989 +0800
+@@ -969,7 +969,7 @@ This option should be the name of a dire
+ directory should not be writable by the ftp user. This directory is used
+ as a secure chroot() jail at times vsftpd does not require filesystem access.
+ 
+-Default: /usr/share/empty
++Default: /var/run/vsftpd/empty
+ .TP
+ .B ssl_ciphers
+ This option can be used to select which SSL ciphers vsftpd will allow for
diff --git a/meta-networking/recipes-daemons/vsftpd/files/init b/meta-networking/recipes-daemons/vsftpd/files/init
new file mode 100755
index 000000000..d0ec010dc
--- /dev/null
+++ b/meta-networking/recipes-daemons/vsftpd/files/init
@@ -0,0 +1,41 @@
+#!/bin/sh
+DAEMON=/usr/sbin/vsftpd
+NAME=vsftpd
+DESC="FTP Server"
+ARGS=""
+FTPDIR=/var/lib/ftp
+
+test -f $DAEMON || exit 0
+
+set -e
+
+case "$1" in
+    start)
+        echo -n "* starting $DESC: $NAME... "
+        if ! test -d $FTPDIR; then
+            mkdir -p $FTPDIR/in
+            chown ftp $FTPDIR -R
+            chmod a-w $FTPDIR
+            chmod u+w $FTPDIR/in
+        fi
+        start-stop-daemon -S -b -x $DAEMON -- $ARGS
+        echo "done."
+        ;;
+    stop)
+        echo -n "* stopping $DESC: $NAME... "
+        start-stop-daemon -K -x $DAEMON
+        echo "done."
+        ;;
+    restart)
+        echo "* restarting $DESC: $NAME... "
+        $0 stop
+        $0 start
+        echo "done."
+        ;;
+    *)
+        echo "Usage: $0 {start|stop|restart}"
+        exit 1
+        ;;
+esac
+
+exit 0
diff --git a/meta-networking/recipes-daemons/vsftpd/files/volatiles.99_vsftpd b/meta-networking/recipes-daemons/vsftpd/files/volatiles.99_vsftpd
new file mode 100644
index 000000000..8a602ba37
--- /dev/null
+++ b/meta-networking/recipes-daemons/vsftpd/files/volatiles.99_vsftpd
@@ -0,0 +1 @@
+d root root 0755 /var/run/vsftpd/empty none
diff --git a/meta-networking/recipes-daemons/vsftpd/files/vsftpd.conf b/meta-networking/recipes-daemons/vsftpd/files/vsftpd.conf
new file mode 100644
index 000000000..bb1929480
--- /dev/null
+++ b/meta-networking/recipes-daemons/vsftpd/files/vsftpd.conf
@@ -0,0 +1,139 @@
+# Example config file /etc/vsftpd.conf
+#
+# The default compiled in settings are fairly paranoid. This sample file
+# loosens things up a bit, to make the ftp daemon more usable.
+# Please see vsftpd.conf.5 for all compiled in defaults.
+#
+# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
+# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
+# capabilities.
+
+# run standalone
+listen=YES
+
+# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
+anonymous_enable=NO
+#
+# Uncomment this to allow local users to log in.
+local_enable=YES
+#
+# Uncomment this to enable any form of FTP write command.
+write_enable=YES
+#
+# Default umask for local users is 077. You may wish to change this to 022,
+# if your users expect that (022 is used by most other ftpd's)
+local_umask=022
+#
+# Uncomment this to allow the anonymous FTP user to upload files. This only
+# has an effect if the above global write enable is activated. Also, you will
+# obviously need to create a directory writable by the FTP user.
+#anon_upload_enable=YES
+#
+# Uncomment this if you want the anonymous FTP user to be able to create
+# new directories.
+#anon_mkdir_write_enable=YES
+#
+# Activate directory messages - messages given to remote users when they
+# go into a certain directory.
+dirmessage_enable=YES
+#
+# Activate logging of uploads/downloads.
+xferlog_enable=YES
+#
+# Make sure PORT transfer connections originate from port 20 (ftp-data).
+connect_from_port_20=YES
+#
+# If you want, you can arrange for uploaded anonymous files to be owned by
+# a different user. Note! Using "root" for uploaded files is not
+# recommended!
+#chown_uploads=YES
+#chown_username=whoever
+#
+# You may override where the log file goes if you like. The default is shown
+# below.
+#xferlog_file=/var/log/vsftpd.log
+#
+# If you want, you can have your log file in standard ftpd xferlog format
+xferlog_std_format=YES
+#
+# You may change the default value for timing out an idle session.
+#idle_session_timeout=600
+#
+# You may change the default value for timing out a data connection.
+#data_connection_timeout=120
+#
+# It is recommended that you define on your system a unique user which the
+# ftp server can use as a totally isolated and unprivileged user.
+#nopriv_user=ftp
+#
+# Enable this and the server will recognise asynchronous ABOR requests. Not
+# recommended for security (the code is non-trivial). Not enabling it,
+# however, may confuse older FTP clients.
+#async_abor_enable=YES
+#
+# By default the server will pretend to allow ASCII mode but in fact ignore
+# the request. Turn on the below options to have the server actually do ASCII
+# mangling on files when in ASCII mode.
+# Beware that turning on ascii_download_enable enables malicious remote parties
+# to consume your I/O resources, by issuing the command "SIZE /big/file" in
+# ASCII mode.
+# These ASCII options are split into upload and download because you may wish
+# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
+# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
+# on the client anyway..
+#ascii_upload_enable=YES
+#ascii_download_enable=YES
+#
+# You may fully customise the login banner string:
+#ftpd_banner=Welcome to blah FTP service.
+#
+# You may specify a file of disallowed anonymous e-mail addresses. Apparently
+# useful for combatting certain DoS attacks.
+#deny_email_enable=YES
+# (default follows)
+#banned_email_file=/etc/vsftpd.banned_emails
+#
+# You may specify an explicit list of local users to chroot() to their home
+# directory. If chroot_local_user is YES, then this list becomes a list of
+# users to NOT chroot().
+#chroot_list_enable=YES
+# (default follows)
+#chroot_list_file=/etc/vsftpd.chroot_list
+#
+# You may activate the "-R" option to the builtin ls. This is disabled by
+# default to avoid remote users being able to cause excessive I/O on large
+# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
+# the presence of the "-R" option, so there is a strong case for enabling it.
+#ls_recurse_enable=YES
+#
+# This string is the name of the PAM service vsftpd will use.
+pam_service_name=vsftpd
+#
+# This option is examined if userlist_enable is activated. If you set this
+# setting to NO, then users will be denied login  unless  they are  explicitly 
+# listed  in the file specified by userlist_file.  When login is denied, the 
+# denial is issued before the user is asked for a password.
+userlist_deny=YES
+#
+# If enabled, vsftpd will load a list of usernames, from the filename given by
+# userlist_file.  If a user tries to log in using  a  name in  this  file,  they
+# will be denied before they are asked for a password. This may be useful in 
+# preventing cleartext passwords being transmitted. See also userlist_deny.
+userlist_enable=YES
+#
+# If enabled,  vsftpd  will display directory listings with the time in your
+# local time zone. The default is to display GMT. The times returned by the
+# MDTM FTP command are also affected by this option.
+use_localtime=YES
+#
+# If set to YES, local users will be (by default) placed in a chroot() jail in
+# their home directory after login.  Warning: This  option has  security  
+# implications,  especially  if  the users have upload permission, or shell access.
+# Only enable if you know what you are doing.  Note that these security implications
+# are not vsftpd specific. They apply to all FTP daemons which offer to put 
+# local  users in chroot() jails.
+chroot_local_user=YES
+#
+allow_writeable_chroot=YES
+#
+tcp_wrappers=YES
diff --git a/meta-networking/recipes-daemons/vsftpd/files/vsftpd.ftpusers b/meta-networking/recipes-daemons/vsftpd/files/vsftpd.ftpusers
new file mode 100644
index 000000000..096142f5d
--- /dev/null
+++ b/meta-networking/recipes-daemons/vsftpd/files/vsftpd.ftpusers
@@ -0,0 +1,15 @@
+# Users that are not allowed to login via ftp
+root
+bin
+daemon
+adm
+lp
+sync
+shutdown
+halt
+mail
+news
+uucp
+operator
+games
+nobody
diff --git a/meta-networking/recipes-daemons/vsftpd/files/vsftpd.service b/meta-networking/recipes-daemons/vsftpd/files/vsftpd.service
new file mode 100644
index 000000000..e27102026
--- /dev/null
+++ b/meta-networking/recipes-daemons/vsftpd/files/vsftpd.service
@@ -0,0 +1,9 @@
+[Unit]
+Description=Vsftpd ftp daemon
+After=network.target
+
+[Service]
+ExecStart=@SBINDIR@/vsftpd
+
+[Install]
+WantedBy=multi-user.target
diff --git a/meta-networking/recipes-daemons/vsftpd/files/vsftpd.user_list b/meta-networking/recipes-daemons/vsftpd/files/vsftpd.user_list
new file mode 100644
index 000000000..d283e3d26
--- /dev/null
+++ b/meta-networking/recipes-daemons/vsftpd/files/vsftpd.user_list
@@ -0,0 +1,20 @@
+# vsftpd userlist
+# If userlist_deny=NO, only allow users in this file
+# If userlist_deny=YES (default), never allow users in this file, and
+# do not even prompt for a password.
+# Note that the default vsftpd pam config also checks /etc/vsftpd.ftpusers
+# for users that are denied.
+root
+bin
+daemon
+adm
+lp
+sync
+shutdown
+halt
+mail
+news
+uucp
+operator
+games
+nobody