This README file contains information on building the meta-fishriver
BSP layer, and booting the images contained in the /binary directory.
Please see the corresponding sections below for details.


Table of Contents
=================

  I. Special notes on the meta-fishriver BSP layer
 II. Building the meta-fishriver BSP layer
III. Booting the images in /binary


I. Special notes on the meta-fishriver BSP layer
================================================

The meta-fishriver layer currently and temporarily uses the crownbay
kernel branch.  This will change once we have new patches and/or
config changes for:

- Zigbee
- wifi
- upstream gma500
- EMGD?


II. Building the meta-fishriver BSP layer
=========================================

For each BSP in the 'meta-intel' repository, there are multiple
branches, one corresponding to each major release starting with
'laverne' (0.90), in addition to the latest code which tracks the
current master.

In order to build an image with BSP support for a given release, you
need to check out the 'meta-intel' branch corresponding to the release
you're building against e.g. to build for laverne (0.90), check out
the 'laverne' branch of both poky and 'meta-intel'.

Having done that, and assuming you cloned the 'meta-intel' repository
at the top-level of your yocto build tree, you can build a fishriver
image by adding the location of the meta-fishriver layer to
bblayers.conf e.g.:

  yocto/meta-intel/meta-fishriver \

To enable the fishriver layer, add the fishriver MACHINE to local.conf:

  MACHINE ?= "fishriver"

You should then be able to build a fishriver image as such:

  $ source poky-init-build-env
  $ bitbake poky-image-sato-live

At the end of a successful build, you should have a live image that
you can boot from a USB flash drive (see instructions on how to do
that below, in the section 'Booting the images from /binary').


III. Booting the images in /binary
==================================

This BSP contains bootable live images, which can be used to directly
boot Yocto off of a USB flash drive.

Under Linux, insert a USB flash drive.  Assuming the USB flash drive
takes device /dev/sdf, use dd to copy the live image to it.  For
example:

# dd if=poky-image-sato-live-fishriver-20101207053738.hddimg of=/dev/sdf
# sync
# eject /dev/sdf

This should give you a bootable USB flash device.  Insert the device
into a bootable USB socket on the target, and power on.  This should
result in a system booted to the Sato graphical desktop.

If you want a terminal, use the arrows at the top of the UI to move to
different pages of available applications, one of which is named
'Terminal'.  Clicking that should give you a root terminal.

If you want to ssh into the system, you can use the root terminal to
ifconfig the IP address and use that to ssh in.  The root password is
empty, so to log in type 'root' for the user name and hit 'Enter' at
the Password prompt: and you should be in.

----

If you find you're getting corrupt images on the USB (it doesn't show
the syslinux boot: prompt, or the boot: prompt contains strange
characters), try doing this first:

# dd if=/dev/zero of=/dev/sdf bs=1M count=512