From c12c16659203d677618871f660c1499152a555a8 Mon Sep 17 00:00:00 2001 From: Anuj Mittal Date: Thu, 12 Jul 2018 22:08:22 +0800 Subject: rmc: remove It's not being maintained anymore and the scripts have not been kept in sync with upstream for quite some time. Signed-off-by: Anuj Mittal --- .../files/intel-x86-common/init-install-efi.sh | 342 --------------------- .../initramfs-live-install-efi_%.bbappend | 2 - 2 files changed, 344 deletions(-) delete mode 100644 recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh delete mode 100644 recipes-core/initrdscripts/initramfs-live-install-efi_%.bbappend (limited to 'recipes-core') diff --git a/recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh b/recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh deleted file mode 100644 index a7a2ad4c..00000000 --- a/recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh +++ /dev/null @@ -1,342 +0,0 @@ -#!/bin/sh -e -# -# Copyright (c) 2016, Intel Corporation. -# All rights reserved. -# -# install.sh [device_name] [rootfs_name] -# -# This file is a copy of file with same name in OE: -# meta/recipes-core/initrdscripts/files/. We modify -# it for RMC feature to deploy file blobs from RMC -# database file to target. - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -# We need 20 Mb for the boot partition -boot_size=20 - -# 5% for swap -swap_ratio=5 - -# Get a list of hard drives -hdnamelist="" -live_dev_name=`cat /proc/mounts | grep ${1%/} | awk '{print $1}'` -live_dev_name=${live_dev_name#\/dev/} -# Only strip the digit identifier if the device is not an mmc -case $live_dev_name in - mmcblk*) - ;; - nvme*) - ;; - *) - live_dev_name=${live_dev_name%%[0-9]*} - ;; -esac - -echo "Searching for hard drives ..." - -for device in `ls /sys/block/`; do - case $device in - loop*) - # skip loop device - ;; - sr*) - # skip CDROM device - ;; - ram*) - # skip ram device - ;; - *) - # skip the device LiveOS is on - # Add valid hard drive name to the list - case $device in - $live_dev_name*) - # skip the device we are running from - ;; - *) - hdnamelist="$hdnamelist $device" - ;; - esac - ;; - esac -done - -if [ -z "${hdnamelist}" ]; then - echo "You need another device (besides the live device /dev/${live_dev_name}) to install the image. Installation aborted." - exit 1 -fi - -TARGET_DEVICE_NAME="" -for hdname in $hdnamelist; do - # Display found hard drives and their basic info - echo "-------------------------------" - echo /dev/$hdname - if [ -r /sys/block/$hdname/device/vendor ]; then - echo -n "VENDOR=" - cat /sys/block/$hdname/device/vendor - fi - if [ -r /sys/block/$hdname/device/model ]; then - echo -n "MODEL=" - cat /sys/block/$hdname/device/model - fi - if [ -r /sys/block/$hdname/device/uevent ]; then - echo -n "UEVENT=" - cat /sys/block/$hdname/device/uevent - fi - echo -done - -# Get user choice -while true; do - echo "Please select an install target or press n to exit ($hdnamelist ): " - read answer - if [ "$answer" = "n" ]; then - echo "Installation manually aborted." - exit 1 - fi - for hdname in $hdnamelist; do - if [ "$answer" = "$hdname" ]; then - TARGET_DEVICE_NAME=$answer - break - fi - done - if [ -n "$TARGET_DEVICE_NAME" ]; then - break - fi -done - -if [ -n "$TARGET_DEVICE_NAME" ]; then - echo "Installing image on /dev/$TARGET_DEVICE_NAME ..." -else - echo "No hard drive selected. Installation aborted." - exit 1 -fi - -device=/dev/$TARGET_DEVICE_NAME - -# -# The udev automounter can cause pain here, kill it -# -rm -f /etc/udev/rules.d/automount.rules -rm -f /etc/udev/scripts/mount* - -# -# Unmount anything the automounter had mounted -# -umount ${device}* 2> /dev/null || /bin/true - -mkdir -p /tmp - -# Create /etc/mtab if not present -if [ ! -e /etc/mtab ]; then - cat /proc/mounts > /etc/mtab -fi - -disk_size=$(parted ${device} unit mb print | grep '^Disk .*: .*MB' | cut -d" " -f 3 | sed -e "s/MB//") - -swap_size=$((disk_size*swap_ratio/100)) -rootfs_size=$((disk_size-boot_size-swap_size)) - -rootfs_start=$((boot_size)) -rootfs_end=$((rootfs_start+rootfs_size)) -swap_start=$((rootfs_end)) - -# MMC devices are special in a couple of ways -# 1) they use a partition prefix character 'p' -# 2) they are detected asynchronously (need rootwait) -rootwait="" -part_prefix="" -if [ ! "${device#/dev/mmcblk}" = "${device}" ] || \ -[ ! "${device#/dev/nvme}" = "${device}" ]; then - part_prefix="p" - rootwait="rootwait" -fi -bootfs=${device}${part_prefix}1 -rootfs=${device}${part_prefix}2 -swap=${device}${part_prefix}3 - -echo "*****************" -echo "Boot partition size: $boot_size MB ($bootfs)" -echo "Rootfs partition size: $rootfs_size MB ($rootfs)" -echo "Swap partition size: $swap_size MB ($swap)" -echo "*****************" -echo "Deleting partition table on ${device} ..." -dd if=/dev/zero of=${device} bs=512 count=35 - -echo "Creating new partition table on ${device} ..." -parted ${device} mklabel gpt - -echo "Creating boot partition on $bootfs" -parted ${device} mkpart boot fat32 0% $boot_size -parted ${device} set 1 boot on - -echo "Creating rootfs partition on $rootfs" -parted ${device} mkpart root ext3 $rootfs_start $rootfs_end - -echo "Creating swap partition on $swap" -parted ${device} mkpart swap linux-swap $swap_start 100% - -parted ${device} print - -echo "Formatting $bootfs to vfat..." -mkfs.vfat $bootfs - -echo "Formatting $rootfs to ext3..." -mkfs.ext3 $rootfs - -echo "Formatting swap partition...($swap)" -mkswap $swap - -mkdir /tgt_root -mkdir /src_root -mkdir -p /boot - -# Handling of the target root partition -mount $rootfs /tgt_root -mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root -echo "Copying rootfs files..." -cp -a /src_root/* /tgt_root -if [ -d /tgt_root/etc/ ] ; then - boot_uuid=$(blkid -o value -s UUID ${bootfs}) - swap_part_uuid=$(blkid -o value -s PARTUUID ${swap}) - echo "/dev/disk/by-partuuid/$swap_part_uuid swap swap defaults 0 0" >> /tgt_root/etc/fstab - echo "UUID=$boot_uuid /boot vfat defaults 1 2" >> /tgt_root/etc/fstab - # We dont want udev to mount our root device while we're booting... - if [ -d /tgt_root/etc/udev/ ] ; then - echo "${device}" >> /tgt_root/etc/udev/mount.blacklist - fi -fi - -# Handling of the target boot partition -mount $bootfs /boot -echo "Preparing boot partition..." - -EFIDIR="/boot/EFI/BOOT" -mkdir -p $EFIDIR -# Copy the efi loader -cp /run/media/$1/EFI/BOOT/*.efi $EFIDIR - -# RMC deployment -RMC_CMD=/src_root/usr/bin/rmc -RMC_DB=/run/media/$1/rmc.db - -# We don't want to quit when a step failed. For example, -# a file system could not support some operations. -set +e - -if [ -f "${RMC_DB}" ] && [ -f "${RMC_CMD}" ]; then - echo "Found RMC database and tool, start RMC deployment" - # query INSTALLER.CONFIG from RMC DB - if ${RMC_CMD} -B INSTALLER.CONFIG -d "${RMC_DB}" -o /tmp/installer.config; then - while IFS=':' read -r NAME TGT_UID TGT_GID TGT_MODE TGT_PATH; do - # skip comment - # The regexp in grep works with busybox grep which doesn't - # seem to have a -P to recognize '\t'. But this expression could not - # work with gnu grep... - if echo "$NAME"|grep -q $'^[ \t]*#'; then - continue - fi - # check if we should create a directory (last char in target path is '/') - # or deploy a file - LAST_CHAR=$(echo "${TGT_PATH:$((${#TGT_PATH}-1)):1}") - - # Do not bail out for failures but user should get stderr message - if [ ${LAST_CHAR} = "/" ]; then - # name field is skipped for directory - echo "DIR: ${TGT_UID}:${TGT_GID}:${TGT_MODE} => ${TGT_PATH}" - mkdir -p "$TGT_PATH" - chown "${TGT_UID}:${TGT_GID}" "$TGT_PATH" - chmod "${TGT_MODE}" "$TGT_PATH" - else - ${RMC_CMD} -B "${NAME}" -d "${RMC_DB}" -o "${TGT_PATH}" - echo "FILE: ${NAME}:${TGT_UID}:${TGT_GID}:${TGT_MODE} => ${TGT_PATH}" - chown "${TGT_UID}:${TGT_GID}" "$TGT_PATH" - chmod "${TGT_MODE}" "$TGT_PATH" - fi - done < /tmp/installer.config - rm -rf /tmp/installer.config - - # remove rmc from target since we don't think it is a valid - # case to run rmc after installation. - rm -rf /tgt_root/usr/bin/rmc - echo "RMC deployment finished" - else - echo "INSTALLER.CONFIG is not found, skip RMC deployment" - fi - - # Final retouching by calling post-install hook - if ${RMC_CMD} -B POSTINSTALL.sh -d "${RMC_DB}" -o /tmp/POSTINSTALL.sh; then - echo "Found POSTINSTALL.sh execute it..." - chmod 500 /tmp/POSTINSTALL.sh - /tmp/POSTINSTALL.sh - rm -rf /tmp/POSTINSTALL.sh - fi -fi -set -e - -if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then - root_part_uuid=$(blkid -o value -s PARTUUID ${rootfs}) - GRUBCFG="$EFIDIR/grub.cfg" - cp /run/media/$1/EFI/BOOT/grub.cfg $GRUBCFG - # Update grub config for the installed image - # Delete the install entry - sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG - # Delete the initrd lines - sed -i "/initrd /d" $GRUBCFG - # Delete any LABEL= strings - sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG - # Delete any root= strings - sed -i "s/ root=[^ ]*/ /g" $GRUBCFG - # Add the root= and other standard boot options - sed -i "s@linux /vmlinuz *@linux /vmlinuz root=PARTUUID=$root_part_uuid rw $rootwait quiet @" $GRUBCFG -fi - -if [ -d /run/media/$1/loader ]; then - rootuuid=$(blkid -o value -s PARTUUID ${rootfs}) - GUMMIBOOT_CFGS="/boot/loader/entries/*.conf" - if [ -d /boot/loader ]; then - # Don't override loader.conf RMC already deployed - if [ ! -f /boot/loader/loader.conf ]; then - cp /run/media/$1/loader/loader.conf /boot/loader/ - fi - # only copy built OE entries when RMC entries don't exist. - if [ ! -d /boot/loader/entries ] || [ ! ls /boot/loader/entries/*.conf &>/dev/null ]; then - cp -dr /run/media/$1/loader/entries /boot/loader - fi - else - # copy config files for gummiboot - cp -dr /run/media/$1/loader /boot - # delete the install entry - rm -f /boot/loader/entries/install.conf - fi - # delete the initrd lines - sed -i "/initrd /d" $GUMMIBOOT_CFGS - # delete any LABEL= strings - sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS - # delete any root= strings - sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS - # add the root= and other standard boot options - sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $GUMMIBOOT_CFGS - # if RMC feature presents, append global kernel command line fragment when it exists. - if [ -f "${RMC_DB}" ] && [ -f "${RMC_CMD}" ]; then - if ${RMC_CMD} -B KBOOTPARAM -d "${RMC_DB}" -o /tmp/kbootparam; then - sed -i "/^[ \t]*options/ s/$/ $(cat /tmp/kbootparam)/" $GUMMIBOOT_CFGS - rm /tmp/kbootparam - fi - fi -fi - -cp /run/media/$1/vmlinuz /boot - -umount /src_root -umount /tgt_root -umount /boot - -sync - -echo "Remove your installation media, and press ENTER" - -read enter - -echo "Rebooting..." -reboot -f diff --git a/recipes-core/initrdscripts/initramfs-live-install-efi_%.bbappend b/recipes-core/initrdscripts/initramfs-live-install-efi_%.bbappend deleted file mode 100644 index 0b3a1d3d..00000000 --- a/recipes-core/initrdscripts/initramfs-live-install-efi_%.bbappend +++ /dev/null @@ -1,2 +0,0 @@ -FILESEXTRAPATHS_prepend_intel-x86-common := "${THISDIR}/files:" -PACKAGE_ARCH_intel-x86-common = "${INTEL_COMMON_PACKAGE_ARCH}" -- cgit v1.2.3-54-g00ecf